xf86Config.c: In function 'configInputDevices':
xf86Config.c:1514: error: request for member 'lay_identifier' in something
not a structure or union
make[5]: *** [xf86Config.lo] Error 1
Introduced with e1165632bd.
X.Org Bug 26971 <http://bugs.freedesktop.org/show_bug.cgi?id=26971>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
In the vast majority of cases there is no xorg.conf that specifies a core
pointer/keyboard. Skip this warning, since we'll get another notification
about how the server relies on the config backend for input devices anyway.
Leave the warning in for the error case (AEI off).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
When the compat output is missing (I don't think this is actually
possible), or is disabled (and hence has no crtc), we would like to
avoid dereferencing NULL pointers. This patch creates inline functions
to extract the current compat output, crtc or associated RandR crtc
structure, carefully checking for NULL pointers everywhere.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The problem fixed by this patch can be reproduced on Linux with the
following steps.
- Access NULL pointer intentionally in ProcessOtherEvent on key press.
- Instead of saving core dump to a file, write it into a pipe.
echo "|/usr/sbin/my-core-dumper" > /proc/sys/kernel/core_pattern
- Dump the core by pressing a key.
While the core is being dumped into the pipe, the smart schedule timer
will cause a pending SIGALRM. Linux kernel stops writing data to the
pipe when there are pending signals. This causes the core dump to be
truncated. On my system I'm expecting a 6 MB dump but the size will be
60 kB instead. The problem is solved if we block the SIGALRM caused by
expired smart schedule timer.
I haven't been able to reproduce this problem in the following cases.
- Save core dump to a file instead of a pipe.
- kill -SEGV `pidof Xorg`
- Press a key to dump core while gdb is attached to Xorg.
- Give option -dumbSched to Xorg.
Also note that the fix works only when NoTrapSignals has the default
value FALSE. The problem can still be reproduced if error signals
aren't trapped. In addition to pending SIGALRM, there is a similar
problem with pending SIGIO from the keyboard driver during core dump.
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently the config and InputClasses are merged together so that the
options from the config backend have the highest priority. This is bad
since it means options such as a default XKB layout set by the backend
cannot be changed by the user.
This patch changes order of precedence to be:
1. xorg.conf
2. xorg.conf.d (later files have higher priority)
3. config backend
In order to allow this ordering, the config parsing has been changed to
read the xorg.conf.d files before xorg.conf. This has the consequence
that the core device picking which looks for the first InputDevice may
not find it in xorg.conf.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The only DDX currently using hotplugging is the xfree86 one and it looks
like it'll stay that way for a bit. Move the initialization to the DDX,
since Xephyr, Xnest, and friends don't need HAL or udev notifications.
Add CloseInput (counterpart to InitInput) to be able to clean up the config
initialization from the DDX as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
The qxl driver is for the QXL virtualized graphics device.
Signed-off-by: Søren Sandmann Pedersen <ssp@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.
Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).
i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".
Example configuration:
udev:
ENV{ID_INPUT.tags}="foo,bar"
hal:
<merge key="input.tags" type="string">foo,bar</merge>
xorg.conf:
Section "InputClass"
Identifier "foobar quirks"
MatchTag "foo|foobar"
Option "Foobar" "on"
EndSection
Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to keep the number of InputClass sections manageable, allow
matches to contain multiple arguments. The arguments will be separated
by the '|' character. This allows a policy to apply to multiple types of
devices. For example:
Section "InputClass"
Identifier "Inverted Mice"
MatchProduct "Crazy Mouse|Silly Mouse"
Option "InvertX" "yes"
EndSection
This applies to the MatchProduct, MatchVendor and MatchDevicePath
entries. Currently there is no way to escape characters, so names or
patterns cannot contain '|'.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Sometimes it is desirable to skip adding specific input devices to the
server. The "Ignore" option is used similarly to Monitor sections so
that matched devices will not be added. BadIDChoice is returned to the
config backend so that it will clean up all resources.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Drivers and options specified in InputClass sections work on a "first
match wins" strategy. Let's be consistent when documenting it.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is RAC's remnant. Any sane person would use a more wise method of
debugging instead.
X.Org Bug 26074 <http://bugs.freedesktop.org/show_bug.cgi?id=26074>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes crash when xscreensaver tries to use GammaRamp calls to fade out
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6915712
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds new function xf86Activate to the OS-specific *VTsw*.c files
and calls it from xf86ProcessActionEvent
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (GNU/Linux)
Fix for OpenSolaris bug 6876992: "[vconsole] Ctrl+Alt+F12 switchs to blank
console screen with hotkeys property turned-off"
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6876992
Xorg needs to do sanity test for the VT it is commanded to switch to.
If the VT is not opened by any process, discard the switching request.
The changes also contain the fix for some flaws discovered when
getting the new gdm to run.
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
xf86Xinput.c relied on xkbsrv.h's definition of True/False which seems odd
at first and weird on second glance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
With InputClass support, it makes more sense to cover all
aspects of acceleration in options. Previously, one could only set the
default on the command line.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ba2d39dd54 introduced warnings:
xf86Mode.c: In function ‘xf86CheckModeForDriver’:
xf86Mode.c:986: warning: passing argument 1 of ‘modeInClockRange’ from incompatible pointer type
xf86Mode.c:253: note: expected ‘ClockRangePtr’ but argument is of type ‘ClockRangesPtr’
xf86Mode.c:1002: warning: passing argument 1 of ‘modeInClockRange’ from incompatible pointer type
xf86Mode.c:253: note: expected ‘ClockRangePtr’ but argument is of type ‘ClockRangesPtr’
Because I foolishly didn't notice that we had types with nearly
identical members named ClockRange and ClockRanges. The latter
contained an extra 'strategy' member at the end, which claimed to be
needed by the vidmode extension. Of course, this was a lie: the only time
we'd use it was in mode validation, for drivers using LOOKUP_CLKDIV2 with
non-programmable clocks. The only driver using LOOKUP_CLKDIV2 is
rendition, which has a programmable clock. The only driver using the
ClockRanges type was smi, which did not use it for its 'strategy' member,
so has been fixed to use ClockRange instead.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
While the identifier is likely set before the input classes are merged, the
driver may not be. Hence don't check for a driver before we've completed
configuration for this device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Refactored code into the parser to allow the freeform boolean types used
in Option entries to be used in other configuration entries. This isn't
as powerful as allowing "No" to precede the option names, but it atleast
gives a common handling of "yes", "no", etc.
A type xf86TriState has been added to support an optional boolean. This
allows the boolean sense of the value to be kept while providing a means
to signal that it is unset.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Any input device with this option will be automatically added to whichever
server layout is selected at startup. This removes the need to reference a
device from the ServerLayout section. The two following configuration are
identical:
CONFIG 1:
Section "ServerLayout"
InputDevice "foo"
EndSection
Section "InputDevice"
Identifier "foo"
...
EndSection
CONFIG 2:
Section "InputDevice"
Identifier "foo"
Option "AutoServerLayout" "on"
...
EndSection
The selection of the server layout affects both explicitly specified
layouts and the implicit layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp at keithp.com>
Add a new command line parameter, -configdir, to specify the config
directory to be used. Rules are the same as -config for root vs. user
privileges.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
I don't think this one has been in use since 2003.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Most of the Xv Put/Get operations have an off by one error in the
viewport clipping.
Apparently PutImage was fixed at some point but the same code was
already copy-pasted all over the place, and so the other operations
still suffer from the bug.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously it was trying to set the same value as the default one. Sigh.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Technically, disabling AEI is the right suggestion. AEI off forces the
server to init the built-in defaults for input devices (or pick the first
one from the config file). At the same time, hotplugging is still available
with AEI off.
Unfortunatly, in the vast majority of cases users want to simply disable
hotplugging or have a working server while the local HAL configuration is
broken or missing. Disabling AEI will lead to duplicate events, triple
keystrokes, etc. once the configuration works again.
It's not actually required to remove AEI once hotplugging works again,
though it will in many cases lead to a setup that appears broken.
Asking users to disable AutoAddDevices instead means those users disable
hotplugging, can then fix the HAL setup and they _must_ remove the config
line again to test if hotplugging works again. Which doesn't leave them with
a broken config once everything is working nice and dandy. Less bugreports,
everybody wins.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: James Cloos <cloos@jhcloos.com>
Should probably also be applied to stabler xserver branches too.
Luc Verhaegen.
From a22bc20721bad506d8fa9772b1258568cbffe7d2 Mon Sep 17 00:00:00 2001
From: Luc Verhaegen <libv@skynet.be>
Date: Wed, 11 Nov 2009 15:52:39 +0100
Subject: [PATCH] Xv: Fix AdjustFrame when driver implements ReputImage.
Finally fixes fd.o #4653, filed more than 4 years ago.
Patch can be happily applied to all modular Xorg versions.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xorg creates its log file following the umask of the user running
startx, which may result in a world-writable log. Set umask to 022 to
prevent this.
Debian bug#555308 <http://bugs.debian.org/555308>
See also http://thread.gmane.org/gmane.comp.security.oss.general/2299
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's let glibc do the right thing for dense/sparse selection.
The _alpha_iobase code has been unused since the switch to libpciaccess. It
really should have been killed by fba700f1f6.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The event fd may be invalidated by the pInfo->read_input call. If it is
invalidated, the subsequent FD_CLR call will segfault. Thus, the FD_CLR
call must precede the pInfo->read_input call.
Signed-off-by: Chase Douglas <chasedouglas@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Existing video drivers will get the console enabled by default.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This was initially fixed by commit 3932a84857
but then (presumably not intentionally) undone by commit
1d54479cb3 .
Signed-off-by: Hans Nieser <hnsr@xs4all.nl>
Signed-off-by: Keith Packard <keithp@keithp.com>