Use the DRM_CAP_ADDFB2_MODIFIERS query to make sure the kms
driver supports modifiers in the addfb2 ioctl, and fall back
to addfb ioctl without modifiers if modifiers are unsupported.
E.g., as of Linux 4.17, nouveau-kms so far does not suppport
modifiers and gets angry if drmModeAddFB2WithModifiers() is
called (-> failure to set a video mode -> blank screen), but
Mesa's nvc0+ gallium driver causes gbm_bo_get_modifier() to
return a valid modifier by translating the default tiling of
bo's created via gbm_bo_create() into a modifier other than
DRM_FORMAT_MOD_INVALID (see Mesa's nvc0_miptree_get_modifier()).
Testing for != DRM_FORMAT_MOD_INVALID is apparently not
sufficient for safe use of drmModeAddFB2WithModifiers.
Bonus: Handle potential failure of populate_format_modifiers().
The required DRM_CAP is defined since libdrm v2.4.65, and we
require v2.4.89+ for the server, so we can use it unconditionally.
Tested on intel-kms, radeon-kms, nouveau-kms. Fixes failure on
NVidia Pascal.
Fixes: 2f807c2324 ("modesetting: Add support for multi-plane pixmaps when page-flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
ms_queue_vblank() returns false on failure.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
We would fail to get the FB ID if it wasn't already imported, since we
were checking to see if the pointer was NULL (it never was) rather than
if the content of the pointer was 0.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
drmmode_crtc_set_mode has a loop nested inside another loop, where both
of them were using 'i' as the loop iterator. Rename it to avoid an
infinite loop.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Non-atomic kms drivers like radeon-kms (or nouveau-kms with
default setting of "atomic ioctl disabled") don't export
any formats, so num_formats == 0.
Some atomic drivers (nouveau-kms with boot param nouveau.atomic=1,
or intel-kms on, e.g., Linux 4.13) expose num_formats == 0, or
don't expose any modifiers, so num_modifiers == 0.
Let the drmmode_is_format_supported() check pass in these cases
to allow page flipping, as it works just fine.
Tested on NV-96 for nouveau, HD-5770 for radeon, Intel Ivybridge
with Linux 4.13 and drm-next to fix page flipping.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We need to make sure that the atomic commit are consistent
or else the kernel will reject it. For example, when moving
a CRTC from one output to another one, the first output CRTC_ID
property needs to be reset. Also if the second output was using
another CRTC beforehands, it needs to be disabled to avoid an
inconsistent state.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
CRTCs and outputs needs to be enabled/disabled when the current
DPMS mode is changed. We also try to do it in an atomic commit
when possible.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of whether or not we fed modifiers into GBM when we allocated
a BO. We'll use this later inside Glamor, to reallocate buffer storage
if we allocate buffer storage using modifiers, and a non-modifier-aware
client requests an export of that pixmap.
This makes it possible to run a compositing manager on an old GLX/EGL
stack on top of an X server which allocates internal buffer storage
using exotic modifiers from modifier-aware GBM/EGL/KMS.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Keep track of whether or not we fed modifiers into GBM when we allocated
a BO. We'll use this later inside Glamor, to reallocate buffer storage
if we allocate buffer storage using modifiers, and a non-modifier-aware
client requests an export of that pixmap.
This makes it possible to run a compositing manager on an old GLX/EGL
stack on top of an X server which allocates internal buffer storage
using exotic modifiers from modifier-aware GBM/EGL/KMS.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reported-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The framebuffer can include multiple CRTCs in multi-monitors
setup. So we shouldn't use the buffer size but the CRTC size
instead. Rotated displays are shadowed, so we don't need to
worry about it there.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fixes a regression caused by modifiers support. For some hw to
continue working even if not supporting ARGB8888 and ARGB2101010
formats, we assume that all imported BOs are opaque.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Otherwise the same content is shown on all outputs.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.comM>
drmmode_output_dpms is called especially with !output->crtc found in
xf86DisableUnusedFunctions so we have to guard for it, else the server
segfaults:
0 0x00007fdc1706054b in drmmode_output_dpms (output=0x55e15243c210, mode=3) at
drmmode_display.c:2243
1 0x000055e1500b6873 in xf86DisableUnusedFunctions (pScrn=0x55e152133f00) at
xf86Crtc.c:3021
2 0x000055e1500be940 in xf86RandR12CrtcSet (pScreen=<optimized out>,
randr_crtc=0x55e1524b2b90, randr_mode=0x0, x=0, y=0, rotation=<optimized out>,
num_randr_outputs=0, randr_outputs=0x0) at xf86RandR12.c:1244
3 0x000055e1500fa1c2 in RRCrtcSet (crtc=<optimized out>, mode=0x0, x=0, y=0,
rotation=rotation@entry=1, numOutputs=numOutputs@entry=0, outputs=0x0) at
rrcrtc.c:763
4 0x000055e1500fba9e in ProcRRSetCrtcConfig (client=0x55e152bfae50) at
rrcrtc.c:1390
5 0x000055e150044008 in Dispatch () at dispatch.c:478
6 0x000055e150047ff8 in dix_main (argc=13, argv=0x7ffc68561038,
envp=<optimized out>) at main.c:276
7 0x00007fdc1a0c6a87 in __libc_start_main () at /lib64/libc.so.6
8 0x000055e150031d0a in _start () at ../sysdeps/x86_64/start.S:120
Fixes: ba0c75177 ("modesetting: Fix up some XXX from removing GLAMOR_HAS_DRM_*")
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We don't use flink in the GetFB import path anymore, as we do an
FD-based import instead.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
A cosmetic change for automake (though we have to replicate some of
xorg-macros.m4 in manpages.am now), but meson's configure_file() wants
@-delimited strings.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The check for "no modifier specified" in drmmode_is_format_supported()
should check for DRM_FORMAT_MOD_INVALID, not for zero, as zero actually
means DRM_FORMAT_MOD_LINEAR.
This allows page-flipping again when appropriate, as
tested under nouveau and ati drivers.
Fixes: 9d147305b4 ("modesetting: Check if buffer format is supported when flipping")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
All the macros are available in the libdrm that we depend on.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
We already require libdrm 2.4.89 which provides the definition plus
guarding kernel UABI like that is generally a bad idea.
See previous commit for details why :-)
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The macro was available in libdrm for ages. Furthermore having a guard
like this is a very bad idea.
Building on an old server will result in a missing run-time functionality.
Since it's UABI one can use a local fallback, old kernels will return
-EINVAL and the fallback path will kick in.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With earlier commit the required version was bumped to 2.4.89, thus the
guards always evaluate to true.
Fixes: e4e3447603 ("Add RandR leases with modesetting driver support
[v6]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This reverts commit 8c455db0eb.
Since xf86platformBus.h is only included when XSERVER_PLATFORM_BUS is
defined, and configure.ac only defines that on systems with udev, this
commit breaks the build on non-udev systems like Solaris.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Add support for 'check_flip2' so that the present core can know
why it is impossible to flip in that scenario. The core can then
let know the client that the buffer format/modifier is suboptimal.
v2: No longer need to implement 'check_flip'
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Use most optimal buffer format (e.g. tiled/compressed) available
for scanout.
v2: Don't use multi-plane modifier to create scanout buffer
v3: Add flag to retrieve modifiers set from enabled CRTCs only
v4: Fix uses when GBM/EGL driver doesn't support modifiers
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Retrieve IN_FORMATS property from the plane. It gives the
allowed formats and modifiers for BO allocation.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
To make sure we also use the same primary plane and to avoid
mixing uses of two APIs, it is better to always use the atomic
modesetting API when possible.
v2: Don't use mode_output->connector_id
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This allows the uses of CCS compressed or tiled pixmaps as BOs when
page-flipping.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
In order to flip between compressed and uncompressed buffers -
something drmModePageFlip explicitly bans us from doing - we need
to port use the atomic modesetting API. It's only 'fake' atomic
though given we still commit for each CRTC separately and
CRTC and connector properties are not set with the atomic API.
The helper functions to retrieve DRM properties have been borrowed
from Weston.
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds support for RandR CRTC/Output leases through the modesetting
driver, creating a lease using new kernel infrastructure and returning
that to a client through an fd which will have access to only those
resources.
v2: Restore CRTC mode when leases terminate
When a lease terminates for a crtc we have saved data for, go
ahead and restore the saved mode.
v3: Report RR_Rotate_0 rotations for leased crtcs.
Ignore leased CRTCs when selecting screen size.
Stop leasing encoders, the kernel doesn't do that anymore.
Turn off crtc->enabled while leased so that modesetting
ignores them.
Check lease status before calling any driver mode functions
When starting a lease, mark leased CRTCs as disabled and hide
their cursors. Also, check to see if there are other
non-leased CRTCs which are driving leased Outputs and mark
them as disabled as well. Sometimes an application will lease
an idle crtc instead of the one already associated with the
leased output.
When terminating a lease, reset any CRTCs which are driving
outputs that are no longer leased so that they start working
again.
This required splitting the DIX level lease termination code
into two pieces, one to remove the lease from the system
(RRLeaseTerminated) and a new function that frees the lease
data structure (RRLeaseFree).
v4: Report RR_Rotate_0 rotation for leased crtcs.
v5: Terminate all leases on server reset.
Leases hang around after the associated client exits so that
the client doesn't need to occupy an X server client slot and
consume a file descriptor once it has gotten the output
resources necessary.
Any leases still hanging around when the X server resets or
shuts down need to be cleaned up by calling the kernel to
terminate the lease and freeing any DIX structures.
Note that we cannot simply use the existing
drmmode_terminate_lease function on each lease as that wants
to also reset the video mode, and during server shut down that
modesetting: Validate leases on VT enter
The kernel doesn't allow any master ioctls to run when another
VT is active, including simple things like listing the active
leases. To deal with that, we check the list of leases
whenever the X server VT is activated.
xfree86: hide disabled cursors when resetting after lease termination
The lessee may well have played with cursors and left one
active on our screen. Just tell the kernel to turn it off.
v6: Add meson build infrastructure
[Also bumped libdrm requirement - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This lets a DRM client map between X outputs and kernel connectors.
v2:
Change CONNECTOR_ID to enum -- Adam Jackson <ajax@nwnk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Save any value of the kernel non-desktop property in the xf86Output
structure to avoid non-desktop outputs in the default configuration.
[Also bump randrproto requirement to a version that defines
RR_PROPERTY_NON_DESKTOP - ajax]
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
glamor now supports depth 30, so allow use of it.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
This retains old behavior for depths <= 24, but allows gamma
table and colormap updates to work properly at depth 30.
This needs the xf86Randr12CrtcComputeGamma() fix for depth 30
from a previous commit to work. Otherwise the server will work,
but gamma table updates will silently fail, iow. the server
would always run with a default identity gamma lut.
v2: Simplify as proposed by Michel.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk> (v1)
Turns out that the kernel DRM ioctl handling returns EINVAL
instead of ENOTTY if one tries to call the new drmCrtcGetSequence()
or drmCrtcQueueSequence() ioctl's introduced in Linux 4.15 on an
older kernel where they are missing. This causes the fallback code
not to fall back to the old drmWaitVblank() ioctl and thereby
failure of vblank stuff.
E.g., on Linux 4.13, glxgears -info runs unthrottled at 10000 fps
instead of 60 fps. Also breakage of OML_sync_control extension.
Check for errno != EINVAL before setting has_queue_sequence = TRUE.
Additionally in case of supported drmCrtcQueueSequence(), set
has_queue_sequence = TRUE on success, or we might get at
least a temporary failure in ms_queue_vblank().
One slight ambiguity is that we can also get EINVAL if
drm_crtc_vblank_get() fails in the kernel, so if that
happened at first invocation of the new api, we'd fall
back to drmWaitVblank() and then fail there, instead of
failing in the new api, but the end result would be the
same.
Fixes: 44d5f2eb8a ("xf86-video-modesetting: Support new vblank kernel API [v2]")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
dri2.c:516:21: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (front->name < 0)
Prevents a failure from being ignored.
This really just wants to be the list of disable booleans and
initialization functions, and nothing else. Stop including the protocol
headers from extinit.h, remove a stray mention of xgl, and move an
XInput declaration to a better place.
v2: A bunch of drivers assume they'll get the DPMS tokens implicitly,
so add it to globals.h.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
We were updating the link-status property when a uevent came in, but
we also want to update the non-desktop property, and potentially
others as well. We also want to check at detect time in case we don't
get a hotplug event.
This patch updates every property provided by the kernel, sending
changes to DIX so it can track things as well.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
drmCrtcGetSequence returns the current vblank sequence and time.
drmCrtcQueueSequence queues an event for delivery at a specified
vblank sequence.
Use these (when available) in preference to drmWaitVBlank.
v2: Remove FIRST_PIXEL_OUT_FLAG. This has been removed from the kernel
API.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the call to queue a vblank event fails, we need to clean up by
removing the user-space queue entry. That is indexed by the local
sequence number, not by the kernel vblank count. The call in this
case was just passing the wrong value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The "done" label restores crtc-> {x,y,rotation,mode}, frees output_id.
Doing the calloc() before writing to those values frees us from
necessity to restore them if calloc fails, and allows to merge
"if (mode)" block.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
CMAP_LOAD_EVEN_IF_OFFSCREEN has been encapsulated since the import of
xf86-video-modesetting into the tree.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
If drmModeGetConnector() fails in drmmode_output_detect(), we have to
reset the output_id to -1 too.
Yet another spot leading to a potential NULL dereference when handling
the mode_output member as output_id was != -1. Though, this case should
be very hard to hit.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Add a missing new-line character and make the message more verbose than
"Failed".
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Roundhouse kick replacing the various (sizeof(foo)/sizeof(foo[0])) with
the ARRAY_SIZE macro from dix.h when possible. A semantic patch for
coccinelle has been used first. Additionally, a few macros have been
inlined as they had only one or two users.
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
