Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
When leaving 3D games such as quake3 or sauerbraten, a cursor may stay on the
screen. This is caused by one run of SW rendering for the SD, even though the
SD was attached to the VCP and thus has HW rendering capabilities.
Check for the SD's attachment (like in all other functions) before deciding on
SW or HW rendering.
X.Org Bug 16805 <http://bugs.freedesktop.org/show_bug.cgi?id=16805>
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
These symbols were removed from the X Server, or never declared.
One symbol that may need special attention is XkbBuildCoreState(),
that doesn't have a prototype anywhere, but is called from
xkb/xkbEvents.c:XkbFilterEvents(), and also used by the macros
XkbStateFieldFromRec() and XkbGrabStateFromRec() defined in
include/xkbstr.h.
fb/wfbrename.h also may need some cleanup, as it makes several
"renames" of non existing symbols.
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
This patch exports all symbols required by the compilable
(in a x86 linux computer) xorg/driver/* modules.
Still missing symbols worth mentioning are:
sunleo
miFindMaxBand no longer available
intel (uxa/uxa-accel.c)
fbShmPutImage no longer available (and should have been static)
mga
MGAGetClientPointer (should come from matrox's libhal)
This is not a definitive "visibility" patch, as all it does is to
export missing symbols, but the modules that current don't compile,
may require more symbols once fixed, and third party drivers should
also require more symbols exported.
A "definitive" patch should export symbols defined in the sdk.
It was removed and simplified some conditionals. We don't need test for
pDev->isMaster inside xf86CursorSetCursor() because only MD enters there.
In the last chunk, ScreenPriv fields were being assigned without need, so
that code was wrapped inside the conditional to avoid it.
I also tried to make the identation more sane in some parts that I touched.
Signed-off-by: Tiago Vignatti <vignatti@c3sl.ufpr.br>
Minor modification, part of the original patch led to cursors not being
updated properly when controlled through XTest.
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
The only function that cat set SWCursor before xf86DeviceCursorInitialize()
is xf86InitCursor() when VCP and is created.
Signed-off-by: Tiago Vignatti <vignatti@c3sl.ufpr.br>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
We need a manual call to SetCursor when we switch from SW to HW rendering and
the other way round. This way we display the new cursor after removing the old
one.
In addition, we only update the internal state for the VCP's sprite. This way,
when we switch back to HW rendering the state is up-to-date and wasn't
overwritten with the other sprite's state.
The second part is a hack. It would be better to keep a state for each sprite,
but then again we don't have hardware that can render multiple cursors so we
might as well do with the hack.
Switches back to HW cursors when sprites other than the VCP are removed.
The current state requires the cursor to change shape once before it updates
to SW / HW rendering (whatever is appropriate), e.g. by moving into a
different window. Until this is done, the cursor is invisible.
over to new system.
Need to update documentation and address some remaining vestiges of
old system such as CursorRec structure, fb "offman" structure, and
FontRec privates.
This moves most of the cursor management code out of the intel driver and
into the general server code. Of course, the hope is that this code will be
useful for other driver writers as well.
Check out xf86Crtc.h for the usage information, making sure you add the
needed hooks to the crtc funcs structure for your driver.
(cherry picked from commit 4d81c99a46)
This code comes from the intel driver, so there's no history in this tree.
As the crtc/output-based mode selection code uses ddc, the ddc and i2c
modules have been merged into the server. Attempts to load them are safely
ignored now.
bugfix: uninitialized pPointer in miPointerGetPosition ifndef MPX
adding DeviceIntPtr parameter to ScreenRec's cursor functions.
cleanup of miPointer code to use same scheme in each function
dix: MPHasCursor() function determines checking whether to invoke
cursor rendering.
animcur: adding DeviceIntPtr parameter to cursor functions but animcur relies
on the core pointer right now.
xfixes: adding DeviceIntPtr parameter to cursor functions but xfixes relies on
the core pointer right now.
rac: adding DeviceIntPtr parameter to cursor functions but RAC relies on
the core pointer right now.
ramdac: adding DeviceIntPtr parameter to cursor functions but ramdac relies on
the core pointer right now.
mi:
added miMPPointers array to mipointer.c
added DeviceIntPtr to all miPointerSpriteFuncs. Coming from miPointer
we use inputInfo.pointer as standard value. ABI BREAK!
ramdac:
forcing failed HW Cursor initialisation. MPX needs software rendering.
changes to use new miPointerSpriteFunc (this required externing
inputInfo, should probably be fixed at a later point).
RAC: changes to use new miPointerSpriteFuncs.
CFLAGS is a user variable, extracted from the environment at configure time
and settable by the user at build time. We must not override this variable.
Get rid of almost all uses of these definitions. They're still defined for
delinquent out-of-tree drivers, and also for the Mesa build. As well as
for miinitext.c. But largely gone.
XFree86LOADER ifdefs, non-loadable hasn't been supported for a while
now. Remove completely gratuitious REMOVE_LOADER_CHECK_MODULE_INFO
ifdefs surrounding a call to a function added in XFree86 4.1 (!).
Miscellaneous static markings.
the current cursor when disabling FB access and would try to restore
that cursor when re-enabling. However, that cursor might have been
destroyed in between. This fixes it by updating the saved cursor
pointer when a cursor is set and vtSema is FALSE.
Add XSERV_t, TRANS_SERVER, TRANS_REOPEN to quash warnings.
Add #include <dix-config.h> or <xorg-config.h>, as appropriate, to all
source files in the xserver/xorg tree, predicated on defines of
HAVE_{DIX,XORG}_CONFIG_H. Change all Xfont includes to
<X11/fonts/foo.h>.
change "foo.h" to <X11/foo.h> for core headers, e.g. X.h, Xpoll.h;
change "foo.h", "extensions/foo.h" and "X11/foo.h" to
<X11/extensions/foo.h> for extension headers, e.g. Xv.h;
change "foo.[ch]" to <X11/Xtrans/foo.[ch]> for Xtrans files.