--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
No semantical changes. Just moved code around, grouping PCI related stuff in a
single chunk.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This is slightly draconian, but that API is just awful. In all but
one case in the callers it's used to get a map of some legacy VGA
memory, and it would be cleaner for the caller to just call
pci_device_map_legacy.
The sole exception is in the vesa driver, which uses it to avoid having
to look up which device the BAR belongs to. That's similarly trivial to
fix.
Having done that, Linux's PCI layer is now very small indeed.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
pciaccess handles this now.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
udev_enumerate_add_match_tag() and udev_monitor_filter_add_match_tag()
are mostly optimizations, hence simply skip these calls if they are not
available in the installed version of libudev.
This should fix the build on older versions of udev.
[airlied: fixes tinderbox failures on RHEL6]
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Current autoconf versions are very unhappy when code fragments are not
wrapped in AC_LANG_SOURCE macros, generating errors like:
configure.ac:723: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:194: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2662: _AC_LINK_IFELSE is expanded from...
../../lib/autoconf/general.m4:2679: AC_LINK_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:606: AS_IF is expanded from...
../../lib/autoconf/general.m4:2032: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2053: AC_CACHE_CHECK is expanded from...
configure.ac:723: the top level
Signed-off-by: Keith Packard <keithp@keithp.com>
This does not really handle hotplug (it's handled inside the kernel,
by the 'mux' devices), but uses the wscons console driver
configuration to figure out the keyboard layout and the list of
pointing devices found by the kernel.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
"configure --with-int10" is not a valid configuration, and the check for
sys/vm86.h and sys/io.h is not used. Delete it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This is the last mention after ccfaf82367
quit using the variable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tiago Vignatti posted an identical patch in June 2010, which I only
noticed after getting the above reviews. His patch was:
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Pasting from ./configure --help's output, one would get:
| configure: WARNING: unrecognized options: --disable-shm
Fix the help string to include the previously missing “mit” bits.
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
If config/udev was enabled, this would default to base, which means that
after regen the devices would get the wrong rules, and hilarity would
ensue.
It's probably safe to default to evdev unconditionally on Linux by now.
Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Unable to find any use of the PERL Automake variable.
It was used in hw/xfree86/scanpci around 2005.
Should it ever be needed, use XORG_WITH_PERL macro.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use the new event types so we can pass a valid SBC value to clients.
Fix up the completion calls to use CARD32 instead of CARD64 to match
the new field size.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
automake generates _DEPENDENCIES from _LIBADD, but it strips out variables.
This resulted in not relinking if some components were rebuilt (like
libdix, libos, etc).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
sdksyms moved from hw/xfree86/loader to hw/xfree86, so the
configure-time create of sdksyms.dep needs to reflect that
change. Otherwise, make might be confused by a missing file and (more
importantly to me) hw/xfree86/loader/sdksyms.dep will be left around
after 'make clean' causing 'make distcheck' to fail.
Passed through from configure.ac via manpages.am
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This matches a change in xorg-sgml-docs whereby the masterdb will look for
the target dbs into the same location as the generated documents.
The target dbs are now installed alongside the generated documents.
Previously they are installed in $prefix/sgml/X11/dbs alongside masterdb which
has the potential of installing outside the package prefix and cause
distcheck to fail when user does not have write permission in this package.
Requires XORG_CHECK_SGML_DOCTOOLS(1.8) which was released 2011-06-11
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bumping this dependency means some additional macros can be used, like
_X_UNUSED.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Implements pointer barriers as specified by version 5 of the XFIXES
protocol. Barriers are axis-aligned, zero-width lines that block pointer
movement for relative input devices. Barriers may block motion in either
the positive or negative direction, or both.
v3:
- Fix off-by-one in version_requests array
- Port to non-glib test harness
- Fix review notes from Søren Sandmann Pedersen, add tests to match
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Relocate the docs under the doc subdir.
Remove redundant xml subdir.
The xmlrules set of makefiles are no longer used.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the appropriate location for reusable configuration and/or
makefile artifacts as opposed to picking one of the subdirs where
it is used.
It shields them from future doc reorg as every subdir
will refer to the root package which never changes location.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makefile is used to build the 60+ docbooks in xorg.
Dtrace is a user document and should be located under doc subdir.
This user document can now refer to external user/specs docs
or can be referred to by such documnets.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Maintaining either requires full knowledge of both.
It's not obvious one has to check the usage of global variables
in devbook.am when maintaining doxygen target. Or vice-versa.
Being in their respective directory, one less thing to worry about.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The user/specs docs now have external references support.
Developers doc are not installed so they do not participate.
However, using a similar makefile shared amongst developers
document reduces maintenance and is forward looking.
Man pages being out of here, reorg developers docs under the same roof.
Drop the obsolete sgml subdir.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Look for Khronos OpenGL spec files using pkg-config, rather than downloading them
Also add a --with-khronos-spec-dir=PATH configure option so XWin can be directed
where to find these files without using the khronos-spec-files package
XWin with AIGLX requires OpenGL spec files in order to generate wrapper code which:
(1) thunks from the glapi dispatch table which uses the default cdecl calling convention
to native GL functions using the stdcall calling convention.
(2) performs function address lookup for OpenGL 1.2+ functions, which are treated
as extensions and so not directly linkable.
v2: KHRONOS_SPEC_DIR is only valid when XWIN_GLX_WINDOWS is defined. Avoid 'make dist'
seeing invalid dependencies by only including rules using KHRONOS_SPEC_DIR if
XWIN_GLX_WINDOWS is defined
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Let configure --enable/disable-aiglx control building of AIGLX for all DDXs. Currently
we can't use --enable/disable-aiglx to control if Xwin DDX is built with AIGLX enabled,
as at the moment it's forced off if we aren't building the X.Org DDX DRI or DRI2 loader
Rearrange things a bit, introducing a new automake conditional, AIGLX_DRI_LOADER to
specifically indicate if the X.Org DDX DRI/DRI2 loader convenience library should be
built, and replace the previous X.Org DDX-specific uses of the AIGLX conditional with that
As before, AIGLX_DRI_LOADER is only enabled if --enable-glx, --enable-aiglx and at least one
of --enable-dri or --enable-dri2 are enabled
This allows the general conditional AIGLX to control if AIGLX is built for the XWin DDX as
well
The C #define AIGLX set by AC_DEFINE(AIGLX) seems to be obsolete, I can't find anything
which checks it
Updated for ajax's "glx: Make --disable-dri not disable AIGLX" patch, which allows DRI2
to be enabled independently of DRI1
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
For fbAdd{Traps,Triangles}() and fbRasterizeTrapezoid() this is just a
matter of adding the image offsets to the trap offsets.
For fbShapes, the story is more complicated:
The recently added pixman API did not allow offsetting
trapezoids. Instead, it would use x_dst and y_dst in such a way that
the effect was to only offset the source image.
In pixman 0.21.8, this API has changed such that all the traps are
conceptually rendered to an infinitely big image, and the source and
destination coordinates are then aligned with (0, 0) of that
image. This means offsetting dst_x and dst_y will now offset the
entire drawing, which is similar to how other composite functions
work.
This patch then changes fbComposite{Triangles,Traps} such that the
source image is aligned with the shapes, and the destination
coordinates offset according to drawable->{x, y}.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
The few features from the glib test suite we used can be replaced with
assert and printf. This patch is a simple replacement for these two
g_assert → assert
g_test_message → printf
g_test_init is removed and so is g_test_bug_base. g_test_run replaced with a
simple return 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Introduced in 6a5bf15fa9
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
AX_TLS detects when toolchains support __thread or __declspec(thread),
but existing code assumed __thread.
This also adds a check to configure.ac to error out if TLS is requested
but unsupported.
Found-by: Tinderbox
http://tinderbox.x.org/builds/2011-03-22-0007
Regression-from: 82b1eaa6ca
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Tom Fogal <tfogal@alumni.unh.edu>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
A handful of modules have begun adding unit test programs.
These macros will help providing a consistent interface which will
help package builders and developers to manage the functionality.
XORG_ENABLE_UNIT_TESTS will turn on/off unit testing, regardless
of how it is implemented. The default (yes/no) can be specified by each
module. It can be used by itself if glib or -wrap support is not needed.
XORG_WITH_GLIB will probe the system for glib-2.0. A different version
can be specified in each module. It will consult XORG_ENABLE_UNIT_TESTS
but can be used by itself in contexts other then unit testing.
The default (yes/no) can be specified by each module.
XORG_LD_WRAP will probe the linker for -wrap support. It will consult
XORG_ENABLE_UNIT_TESTS but can be used by itself in contexts
other then unit testing.
configure options:
--enable-unit-tests Enable building unit test cases (default: auto)
--with-glib Use GLib library for unit testing (default: auto)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
No functional changes.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nobody can have been using this, it's never called from extension init.
XI2 device properties should now be a functional replacement.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Christof Wolf has reported a regression that seems to be caused by
this change, so reverting the change in the 1.9 branch. We'll
investigate a proper fix in master for 1.10.
This reverts commit c89f052104.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The paths in doxygen.conf assumed that srcdir=builddir and broke
otherwise. Use autoconf to fill in the paths to the srcdir so that the
files can be found when users have a separate build directory (as with
distcheck).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Non-GNU makes don't deal with the sinclude or -include variants that
allow Makefile stubs to be created and then included during the build.
Instead, create an empty file at the end of configure so that the
regular include statement can be included. This is how automake handles
automatic source dependencies.
In order to trick automake into not processing the include statement, a
variable is used.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This aligns the xorg server build with the mesa build, which is needed on
systems where aiglx with dri support is not enabled. Else the following error is
obtained when trying to load the software raster:
(EE) AIGLX error: dlopen of /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: undefined symbol: _glapi_tls_Context)
(EE) GLX: could not load software renderer
(II) GLX: no usable GL providers found for screen 0
because mesa always enables TLS use in GLX, even if dri is not available.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some trivial build fixes required
Also fill out all function pointers for primaryfb engine
Also tidy up the man page section describing drawing engines.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Tested-by: Colin Harrison <colin.harrison@virgin.net>
Following the convention makes it easier to locate man pages,
user's or developer's documentation and specifications.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use standard directory and makefile.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Fix trailing whitespaces
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Now can be built easily on any platform in the man directory
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nothing requires the use of a C preprocessor
Using standard file extensions (.man) means no need for .gitignore
Use standard directory and makefile
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Uses the AX_TLS macro to figure out if the current platform
supports TLS. If it does, enable TLS automagically. Still
respects --enable option, regardless.
Signed-off-by: Tom Fogal <tfogal@alumni.unh.edu>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
An interface is provided for figuring out the PID and process name of
a client. Make some existing functionality from SELinux and IA
extensions available for general use.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
This reverts commit 579715f830.
The patch is not needed anymore. I haven't encountered backtrace
problems with GCC 4.3.3. Even if the problems still persisted, this
commit should be removed and instead the definition of _X_NORETURN
should be modified to be empty if GCC/ARM is used. However, currently
it seems that ARM backtraces are OK even if _X_NORETURN is used and
-mapcs-frame is not defined in CFLAGS.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This has never been buildable in any modular server release.
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Use the util-macros AM Conditionals to control generation of developers
documents. This is used throughout xorg modules.
The doxygen generated docs are now also managed by --enable-devel-docs.
Remove --enable-builddocs as this was last use for BUILDDOCS
*** From the RELEASE NOTES ***
New configure options for documentation in modules
--------------------------------------------------
As many more modules now contain documentation to be converted from DocBook XML to text,
HTML, PostScript, and/or PDF formats, new standard options have been added to the configure
macros to control the build of these in the modules.
--with-xmlto=yes|no
Enables or disables use of the xmlto [https://fedorahosted.org/
xmlto/] command to translate DocBook XML to other formats.
All DocBook XML conversions require use of this command.
--with-fop=yes|no
Enables or disables use of the Apache fop [http://
xmlgraphics.apache.org/fop/] command to translate DocBook
XML to PostScript and PDF formats.
--enable-docs=yes|no
Enables or disables the build and installation of all
documentation except traditional man pages or those covered
by the --enable-devel-docs and --enable-specs options.
--enable-devel-docs=yes|no
Enables or disables the build and installation of documentation
for developers of the X.Org software modules.
--enable-specs=yes|no
Enables or disables the build and installation of the formal
specification documents for protocols and APIs.
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix damage to XWIN_LIBS in commit af0f9f9133
"Move some sync code to miext", which broke the XWin build
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison at virgin.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Provides a portable implementation of this common allocating sprintf()
API found in many, but not yet all, of the platforms we support.
If the platform provides vasprintf() we simply wrap it, otherwise we
implement it - either way callers can use it regardless of platform.
Since not all platforms guarantee to NULL out the return pointer on
failure, we don't either, and require callers to check the return
value for -1.
The old Xprintf() API is deprecated, but left for compatibility for now.
The new API is added in a new header so that it can be used in parts of
the server such as hw/xfree86/parser that don't include all the server
headers.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Nothing requires the use of a C preprocessor
Using standard file exentions (.man) means no need for .gitignore
Use standard directory and makefile
Fix man page whitespace issues
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Dew <matt@osource.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Subsequent changes rely on fence sync protocol
in the sync extension. This protocol is only
complete in xextproto version 7.1.99 and
above.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
As a precursor to the fence sync object video driver
and extension API, move some code from Xext to
miext/sync. Most of this is just code to set up the
build system to include the new directory. No
functional code is added in this change.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This fixes the following build errors when DTrace is enabled
(--with-dtrace):
CCLD Xdmx
/usr/bin/ld: ../../os/os.O: undefined reference to symbol 'dladdr@@GLIBC_2.2.5'
/usr/bin/ld: note: 'dladdr@@GLIBC_2.2.5' is defined in DSO /lib64/libdl.so.2 so try adding it to the linker command line
CCLD Xephyr
../../../os/os.O: In function `TimerForce':
/home/nico/work/xserver/os/WaitFor.c:481: multiple definition of `TimerForce'
../../../os/os.O:/home/nico/work/xserver/os/WaitFor.c:481: first defined here
Signed-off-by: Nicolas Peninguy <nico@lostgeeks.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Most importantly removes AC_PROG_CC call that resets compiler flags back
to C89 mode, breaking use of C99 isfinite() on Solaris in dix/devices.c.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Only one (marginal) driver was using it, and it's been fixed to just
implement it directly.
v2: Also fix sdksyms.sh (spotted by Jesse Adkins)
v3: Also fix DESIGN.xml (spotted bu Julien Cristau)
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Taken from:
50d2d8c896dbffd0d44a9b5b10216375f9b98af307fba8b1f7
With minor style fixes, ported to dixLookupResourceByType, and ported
away from client->noClientException and xalloc/xfree.
v2: Fix a memory leak in PanoramiXCompositeNameWindowPixmap, spotted by
James Jones.
v3: Fix a buglet in PanoramiXCompositeUnredirectSubwindows, spotted by
Dave Airlie.
v4: Fix a style issue with resource lookup noted by Jamey Sharp.
Reviewed-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Nothing's using it, the SysV derivatives we support have their own
custom versions.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Change the library order in TSLIB_LIBS variable, placing ${TSLIB_LIBS}
after the local static libraries. This fixes linking with
-Wl,--as-needed.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=30600
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
If pkg-config is unable to find tslib but the fallback check does find
it, the compilation continues with tslib support enabled though
TSLIB_LIBS are unset. Thus, the compilation fails with a linking error
on tslib functions.
This patch sets TSLIB_LIBS to '-lts' whenever the tslib fallback check
succeeds.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=30599
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
With libtool 2.2.10 the difference in build time is so small
(< 5% with -j8 builds) that it isn't worth having this hack.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The trusted location of the dri driver directory can be obtained
from the mesa dri.pc pkg-config file.
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This was already removed for XWin (20701522be)
with no reported side effects. XQuartz seems to be behaving ok without it as
well. While this possibly brings back bug #1168, we don't have any reproduction
steps for that issue, and if it crops up again, we should fix it a real way
rather than this hokey workaround which doesn't even work for COMPOSITE.
This effectively reverts the following two changes:
b2135e589bd7fef52254
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Mostly pulled together from posts to my blog and the docs posted
at http://people.freedesktop.org/~alanc/dtrace/ and converted to
DocBook.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Patrick E. Kane <pekane52@gmail.com>
Bumps minimum xorg-macros requirement from 1.6 to 1.10
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Patrick E. Kane <pekane52@gmail.com>
It's already defined inside REQUIRED_LIBS and all DDX are getting it already.
No semantical changes.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
X server doesn't need to understand fpe internals, so use
register_fpe_functions from libXfont.
It's required to get new version of libXfont, therefore adjust it to be passed
to autoconf.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Any module (drivers) depending on xserver also depends on some of the
server private dependencies. Any driver including xf86.h depends on
xext, kbproto, inputproto and randr.
These dependencies are in separate packages, so anything can happen,
removal, wrong version, etc... and the driver fails during compilation.
Having the private dependencies declared will ensure all packages the
server depends on are present and at the correct version.
Currently each module attempts to check for server dependencies with
various degrees of accuracy. With this patch, the driver will only need
to check for its own explicit dependencies.
Now that xproto is included in Requires.private it is removed from Requires.
All the cflags from both Requires and Requires.private are returned
to caller to pkg-config.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Helps with symbol resolution when building with -z defs
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
It's still being pulled in by the HAL CFLAGS but the requirement to define
this was dropped from DBus pre 1.0 (November 2006).
This means we require dbus 1.0 now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xserver fails to detect libsha1. Problem is that configure checks for
sha1.pc when libsha1 provides libsha1.pc.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously the code was using AC_CHECK_LIB, guaranteeing whether the library
is correct by tracking sha1_begin function. This paranoic checking is not
necessary given there's only one libsha1 in the market, which surely contains
such function.
Moreover, this patch now improves a bit the sha1 implementation checking
behavior using pkg-config to find the right flags that needs to link against.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Some drivers use DRI protocol but implement their own kernel rendering
manager. For these drivers, libdrm becomes useless. --disable-libdrm
configure parameter can be used to disable libdrm support in dri2.
To provide ABI/API compatibility for libdrm based drivers, libdrm call
is wrapped in ifdef.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Uses a fake absolute path to the entity definition files so that
the xmlto --searchpath will work for finding the actual path
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Gaetan Nadon <memsize@videotron.ca>
Allows keeping it in sync with the sources it documents, and to be
released with them
Requires the previous patch to convert the Xserver tree from
LinuxDoc to DocBook for SGML/XML documents.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Tested-by: Gaetan Nadon <memsize@videotron.ca>
Only the markup/formatting is changed - the contents should still
be wildly out of date for now.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Tested-by: Gaetan Nadon <memsize@videotron.ca>
commit bca85e2e12 introduced it.
Use the version that includes _X_NORETURN
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Other DDXs don't use input hotplugging since config_init was moved to
the DDX in commit d33adcdf03, so there's
no need to link this in.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Adds DragonFly BSD, OpenSolaris, & GNU Hurd.
Drops MacOS X, since this is in the section specific to the Xorg/XFree86 DDX.
(Matches the OS patterns the configure script checks for.)
Also uses m4 macros to fix the spacing/formatting of the resulting message.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
This lets the DRI2 clients rely on the server to notify them when they
need to get new buffers. Without this, OpenGL clients poll the server
in glViewport() which can be a performance problems and also isn't
completely correct behaviour.
We bump the DRI2 protocol minor to indicate the availability of the
event, which the DRI2 clients can use to avoid polling. This speeds up
various piglit and oglc test cases as well as real applications.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
A rewrite of the XWin DDX AIGLX code to actually make it do something useful again
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Features which are disabled by default use the --enable-* syntax to show
how they need to be passed to override the default.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
The other SHA1 implementation detections already error out if
specifically requested but were not found.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
When no SHA1 implementation is specified, we should first prefer
system-builtin solutions (libc/libmd/CommonCrypto), then smaller
implementations over the larger ones. libsha1 is much smaller than
libgcrypt, so it should be first.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Acked-by: Julien Cristau <jcristau@debian.org>
Record was broken during the pre-1.6 development cycle and was not fixed
until 1.7.6. Now that it is fixed, re-enable it by default.
This reverts commit 3eaecdd66e.
Conflicts:
configure.ac
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
AC_PROG_SED sets SED as the path to a fully-functional 'sed' (which may
also be called 'gsed' if GNU sed is installed alongside a proprietary
version).
This is a follow up to commit 9be4157391.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Rémi Cardona <remi@gentoo.org>
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In addition to the conf files found in /etc/X11 or $sysconfdir/X11 used
for local administration, we also reserve a system directory for vendor
and package usage. The simple search path is:
/usr/share/X11/xorg.conf.d
$datadir/X11/xorg.conf.d
Files from these directories will have the lowest config priority. The
directory $datadir/X11/xorg.conf.d is exported from xorg-server.pc in
the variable "sysconfigdir". Packages should install their .conf files
to the directory specified by:
`pkg-config --variable=sysconfigdir xorg-server`
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Older versions generate filenames that are different from
the ones listed in the Makefile.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
WindowsWM support is still experimental, and uses the Rootless extension
which currently breaks the simultaneous build of the other DDXs (see
commit b3415187e9). So we disable it by
default for now; once the latter issue is fixed we can make this 'auto'.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
This possibly brings back whatever the bug is in
http://bugs.freedesktop.org/show_bug.cgi?id=1168 for
-rootless mode, but since we don't have reproduction
steps for that, I can't test that...
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Several extensions are not supported by XWin, some of which are enabled
by default in configure. We forcefully disable these early on so that
configure will succeed without arguments and without the corresponding
proto installed.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Only Xorg is installed setuid, so there is no need to run this configure
test on Cygwin.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Due to the checks in configure, this means it gets priority over HAL if
libudev is found.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
udev needs some xorg.conf file to tell it to load a suitable input
driver, 10-evdev.conf is as simple as they come, mapping all evdev
devices to the evdev driver.
Signed-off-by: Keith Packard <keithp@keithp.com>
There are two noreturn functions in the X server: FatalError and
AbortServer. Having any of those two functions in the middle of a call
stack will prevent unwinding the program properly and stops the
backtrace at those functions in gdb.
The file containing FatalError and AbortServer, os/log.c, has to be
compiled with the -mapcs-frame option on ARM to get proper
backtraces. Automake imposes its own restrictions on compiling
individual source files with different options. The recommended way to
do this is to put os/log.c into a convenience library and add this
library inside os/libos.la. See the documentation of GNU Automake
manual, version 1.11.1, section 27.8 Per-Object Flags Emulation, for
details.
Signed-off-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This define was removed in e251c9e75a "Remove all traces of #ifdef XINPUT
and the matching bits from the configure.ac". Drivers that support multiple
server versions and still check for ifdef XINPUT now always build without
XINPUT support if they're calling XORG_DRIVER_CHECK_EXT(XINPUT, inputproto).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
The linker flag required for exporting symbols in executables varies
by platform. libtool handles this with a single -export-dynamic
flag (not to be confused with the similarly-named ELF linker flag)
which tells it to use the correct platform-specific flag at link time.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Allow the default log location to be configurable (e.g. /var/log),
and use separate logs for each display instance (e.g. XWin.0.log).
Make the type of g_pszLogFile const char*, per os/log.c:LogInit().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Although the DDX should be linked to the necessary libraries, we may
also need to pull them in directly to the module to ensure the symbols
are resolved at runtime. Should fix this bug with XSELINUX:
/usr/bin/X: symbol lookup error:
/usr/lib64/xorg/modules/extensions/libextmod.so: undefined symbol:
is_selinux_enabled
-v2: use _LIBADD instead of _LIBS; remove SELINUX_LIBS from
XSERVER_SYS_LIBS as it should only be needed in extmod.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All ddxs require linking against selinux if enabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Keith Packard <keithp@keithp.com>
Let's have all version-specific requirements in one block.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Keith Packard <keithp@keithp.com>
Also remove HAVE_NETLINK_AVC_ACQUIRE_FD tests, because we now
require a version of libselinux that has it.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
All DDXs segfault on Cygwin unless -DFD_SETSIZE=256 is set, so make sure
we do so whether or not we are building XWin.
FD_SETSIZE must be at least XFD_SETSIZE for uses of select() to be correct.
The Cygwin default is only 64, so it must be increased to 256
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Look for system.Xwinrc in SYSCONFDIR/X11 (usually /etc/X11)
Rename sample system.Xwinrc file not to have a X11R6 path in it's name
Add makefile install rule for system.XWinrc
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Use the configured vendor web address in the About dialog
Update resources file: rework About dialog, use 'MS Shell Dlg 2'
logical font for all dialogs, add ellipsis to exit option in tray
menu as it (may) trigger another dialog.
Get short vendor name from xwin-config.h, like other configuration
data presented in the About dialog box, rather than creating the
PROJECT_NAME define
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
AC_CHECK_FILE chokes when cross compiling, so instead we set the default
to the standard FONTROOTDIR directories in that case.
Signed-off-by: Dan Nicholson<dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The default behavior of the server is to start with an invisible root cursor.
Be such cursor invisible or inexistent (null), in the end it doesn't matter -
for the user. The content on screen will be the same. Besides, there's no
difference, in terms of performance, whether such cursor is invisible or
simply null. The paths that both take inside the server are roughly the same.
Therefore create a null root cursor becomes irrelevant.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
We depend on new DRI interfaces now, so require them in configure.ac.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes build on non-Linux platforms by restoring the defaults to
where they were before commit 6c2b3a4247,
to only enable the Linux kbd, mouse & evdev drivers when building
on Linux platforms.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
XORG_WITH_DOXYGEN provides additional functions like a configure
option which allow platform builders to control the usage of
the doxygen program.
This is a requirement from platforms that do not have such doc tool.
A platform with a back level doxygen may use --without-doxygen
to get the rest of the documentation built.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows clients to easily check for swap completion status in their
main loop.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
This patch to xserver configure.ac is to increase code portability to
non POSIX system by using backticks rather than $() for command
substitution for BUILD_DATE and BUILD_TIME.
Reviewed-by: Rémi Cardona <remi@gentoo.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add --without-kdrive-{kbd,mouse,evdev} configure options disabling
Linux keyboard driver, Linux mouse drivers (ps2, bus,ms),
and Linux evdev driver.
Build all drivers by default as before.
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
PC105 is a more useful default for non-American keyboard users,
not harmful for American PC101/PC104 keyboard users.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Introduced in commit 9998105a38
The replacement third parameters to PKG_CHECK_MODULES([DMXMODULES]
was not quoted.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xdmxconfig requires additional modules not checked for if Xdmx build is set
to auto (the default). This may lead to build errors if the Xdmx modules are
installed, but not the extra ones required for xdmxconfig.
X.Org Bug 25102 <http://bugs.freedesktop.org/show_bug.cgi?id=25102>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Remi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
New package dependency unnecessarily links in a few libraries that Xdmx
doesn't need. This can be fixed more elegantly.
This reverts commit 0ef15ca9d2.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xvesa was gone in commit 6d21fbf0 and this should be there as well.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xdmxconfig requires additional modules not checked for if Xdmx build is set
to auto (the default). This may lead to build errors if the Xdmx modules are
installed, but not the extra ones required for xdmxconfig.
X.Org Bug 25102 <http://bugs.freedesktop.org/show_bug.cgi?id=25102>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add missing INSTALL file. Use standard GNU file on building tarball
README may have been updated
Remove AUTHORS file as it is empty and no content available yet.
Remove NEWS file as it is empty and no content available yet.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This macro aggregate a number of existing macros that sets commmon
X.Org components configuration options. It shields the configuration file from
future changes.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Look for $sysconfdir/X11/fontpath.d and, if it exists, set it to the
default font path as a catalogue: entry. Based on app/xfs commit
c66a46e35ae40a23ad9acee838ab42300eddbd67.
Otherwise, use the font-util 1.1 macros to determine the system
fontrootdir and standard subdirectories, or let the user configure it
and the subdirectories themselves.
This adds a build-time (or at least an autoconf/autogen time) dependency
on font-util, and changes the --with-fontdir argument to --with-fontrootdir.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith-xsfywfwIY+M@public.gmane.org>
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
libSystem on darwin can handle SHA1 computation without needing to pull in
OpenSSL. See CC_crypto(3)
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
On Sun, Nov 01, 2009 at 02:54:13PM -0800, Keith Packard wrote:
> Excerpts from Matthieu Herrb's message of Sun Nov 01 09:34:35 -0800 2009:
>
> > +AC_CHECK_FUNCS([SHA1Init], [HAVE_LIBC_SHA1=yes])
>
> I'd suggest AC_CHECK_FUNC instead; as far as I can tell, AC_CHECK_FUNCS
> will also define HAVE_SHA1INIT. Also, can you use HAVE_LIBC_SHA1
> consistently rather than having two separate names (HAVE_LIBC_SHA1 and
> HAVE_SHA1_IN_LIBC)? Yes, I know one is a preprocessor symbol and the
> other is a cpp shell variable, but I think that will work anyway.
>
New version taking you comments into account.
From: Matthieu Herrb <matthieu.herrb@laas.fr>
Date: Sun, 1 Nov 2009 18:19:27 +0100
Subject: [PATCH] Add a probe for SHA1 functions in libc in *BSD.
The interface is the same as the one in libmd.
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously DLOPEN_LIBS was managed in top-level configure.ac.
Instead bundle it with the code using dl*() functions to
avoid breakages in uncommon configurations.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
There are small systems which don't need OpenSSL or gcrypt.
Add libsha1 (http://github.com/dottedmag/libsha1) as an alternative
small SHA1 implementation.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xfbdev failed to build due to dladdr being used by xorg_backtrace.
Explicitly add DLOPEN_LIBS to KDRIVE_LIBS as there does not
seem to be a better place for it.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
make distcheck wants the built dmx documentation so that users don't
have to install doxygen. This means that even if dmx isn't built, the
docs need to be so that the tarball can include them.
Signed-off-by: Keith Packard <keithp@keithp.com>
The DMX docs are build using doxygen if present, so configure.ac
checks to see if that is available. However, when not building dmx
(the default), this conditional must still be defined to make automake
happy.
Signed-off-by: Keith Packard <keithp@keithp.com>
'make distcheck' needs to read xkb files and write out compiled
versions as a part of the 'make check' phase. This patch passes
suitable options to the configure stage of the distcheck process to
read xkb files from the system location and write them to the
distcheck _inst directory.
Signed-off-by: Keith Packard <keithp@keithp.com>
From the original Xsdl commit:
"sdl x server so that we can x-on-x the fb stuff for ease of debugging. if
anyone uses this in production, a big scary monster will eat them.
hrm, perhaps i should make it have a --i-know-what-i'm-doing
param that it doens't start without, heh"
That should be reason enough to not spend time maintaing it. Also, no more
elephants.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These can be recreated by simply running 'doxygen doxygen.conf' in
hw/dmx/doc. Some of the files do not exist anymore, these have been removed.
Some other files have a different naming scheme.
Doxygen warnings about missing links fixed, two warnings remain:
/home/whot/xorg/xserver/hw/dmx/dmxwindow.c:142: Warning: explicit link
request to 'dmxConfigureRootWindow' could not be resolved
/home/whot/xorg/xserver/hw/dmx/dmxwindow.c:119: Warning: explicit link
request to 'dmxConfigureScreenWindow()' could not be resolved
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Move XWIN_LIBS from XWIN=auto conditional to XWIN=yes conditional,
otherwise the build breaks if an explicit --enable-xwin is passed to
configure.
Also remove obsolete library values from the definition.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Replaces special handling for Xquartz DDX and scales better to handling
the multiple platforms that now have some level of Dtrace support available.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Without this, configure spits out
../configure: line 15460: ac_fn_c_check_member: command not found
Also anchor the pattern to make it stricter.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Revert "Add shave so that we can see the steaming piles of warnings generated."
This reverts commit 181cc08c89.
shave was left in the xserver 1.7 release/branch to allow developers &
distros time to transition to automake-1.11. xserver 1.8 series will
require automake-1.11 for silencing build noise.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
libXtst requirement is already implicit since we require xextproto 7.1 and
that doesn't go well with pre 1.0.99.2 versions of libXtst. Nonetheless,
list it explicitly.
Since d044027510 we require dmxproto 2.2.99.1.
Complementing that is libdmx 1.0.99.1 with the dmxext.h header file.
Reported-by: Mark Rosenstand
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes build with dtrace probes on Solaris after efacd7bfd0
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When we're checking whether to build Xnest, we're comparing the
variable to auto but before it never was assigned that.
Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de>
[Xnest was enabled to yes to increase build exposure and catch compiler
errors early. The requirements to Xnest are quite low and I expect most
developers have them, so Xnext will be enabled on most boxes. Anyone
missing those requires probably doesn't want to build Xnest anyway.]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch moves all libraries that require a specific version into a single
location instead or duplicating them across the configure.ac file.
Libraries that do not require specific versions are left where they are.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ar loses the dtrace probe magic when building static libraries, so we
have to link with the .O files in order to resolve the dtrace probe symbols.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
This patch addresses two issues:
The check for HAVE_TSLIB = xauto can never be true, the check has been
corrected to TSLIB = xauto.
Pre-pkgconfig versions of tslib fail to be found, this patch restores the
additional AC_CHECK_LIB. However, the pgk-config check must happen before
AC_CHECK_LIB, as AC_CHECK_LIB does not seem to honour the LD_LIBRARY_PATH.
Thus, if tslib is installed outside of the default paths, AC_CHECK_LIB
fails.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked--by: Daniel Stone <daniel@fooishbar.org>
Reduce the tslib-check to the pkg-config check only instead of the previous
library symbol check followd by a pkg-config check.
This patch also reduces the required version of tslib back down to
tslib-0.0. Unfortunately, the 1.0 tarball available through
http://tslib.berlios.de/ still announces itself as 0.0.2.
Reported-by: Werner Landgraf
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Although a --disable-xres flag is provided, resourceproto was listed in
REQUIRED_MODULES since 2005 (5b218617fa).
Remove, make conditional on the xres flag only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
A recent change switched to C-style automatic string concatenation,
(presumably for better readability and maintainability), but this
doesn't actually work for the shell. So we revert to the previously
working initialization.
This commit reverts one hunk of c947605eda
Protocol requirements were spread throughout configure.ac, leaving us with a
few locations where one DDX asked for a different version of the package
than another.
For each protocol, define <NAME>PROTO="[<name>proto >= version]" and
assemble REQUIRED_MODULES based on these.
Future changes to protocol versions need to only be done in a single place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Allows unit tests to be built with non-gnu-linkers that
also have -wrap support
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Clears warnings about obsolete headers, but raises minimum
required version of xf86driproto to 2.1.0
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds support for using the libpciaccess interface for
vga arbitration support on top of a kernel which supports it.
Currently patches are queued for kernel 2.6.32 in jbarnes
pci tree, and shipping in Fedora kernel.
Co-authors:
Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Put the reference to -lselinux in XORG_SYS_LIBS so it isn't added as a
make dependency for libxorg.la. Otherwise, make goes looking for a file
-lselinux in the current directory, which it obviously won't find.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
If you want to run a pre-1999 kernel, you'll need a pre-2009 X server
[Some pre-Solaris 8 VT support is left by this patch to allow reuse by
the new Solaris VT support that follows in the next patch.]
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Xnest was disabled in 82fc102568 due do build
errors. These errors have since been fixed.
Re-enable Xnest by default to increase coverage by default builds.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Keysym grabs are tricky in the details, keycode grabs are known to work. So
for now, provide keycode grabs only.
Requires inputproto 1.9.99.15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
xextproto had Xlib client headers moved into libXext.
Protocol header files are named fooproto.h, header files with constants
foo.h or fooconst.h where foo.h was already in use for client-side headers.
These two files provide a couple of common defines, functions and variables
that will be used in a number of protocol tests.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not all chipsets need to rely on the int10 scheme to do its daily work.
Well, the ideal would be to remove all int10 module from the server. I'll try
to provide some patches "soon" for this. Something like:
http://cgit.freedesktop.org/~vignatti/libx86/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Not all drivers need this kind of access as well.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
Not all drivers need this kind of access.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Oliver McFadden <oliver.mcfadden@nokia.com>
since libXinerama commit 90d4d23bf2e94721149ddc0a80093b10a82e8845 and
xineramaproto commit 21477147613c28c968b5e1eb9d8aea7017dd399d, the
server no longer needs libXinerama.
Signed-off-by: Rémi Cardona <remi@gentoo.org>
Build and link with rootless extension
Update Xwin code for removal of RootlessAccelInit()
Fix Xwin code which now has a collision with the type name EventType
Based on patches from Colin Harrison, Jon Turney and Yaakov Selkowitz
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The new clipping rules:
- client clips happen after transformation
- pixels unavailable due to the hierarchy are undefined
The first one is implemented in pixman; the second one is realized by
making a copy of window sources (to prevent out-of-bounds access).
The GNU linker supports a -wrap option to wrap function calls at link-time.
This allows for easy overriding of functions in the X server with stubs in
the test suite. This functionality is only supported on the GNU linker and
will be used extensively in the tests. Disable the tests if GNU ld is not
available.
This is related to: bc964ff1e3
XQuartz: Stab at fixing the alpha 0/1 bug (screenshots, etc) by pulling in some old code that got gutted from rootless.
which was on the 1.4 branch and implemented in fbPaintWindow. Now that fbPaintWindow is gone, this is now in miPaintWindow().
(cherry picked from commit 032173f693)
This patch adds a test/ directory that contains the setup for a unit-testing
suite designed for in-server unit-testing. All functions available to the X
server are available to the test binaries through static linking.
This test suite uses the glib testing framework.
Do not use glib calls outside of the test/ directory.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch adds a test/ directory that contains the setup for a unit-testing
suite designed for in-server unit-testing. All functions available to the X
server are available to the test binaries through static linking.
This test suite uses the glib testing framework.
Do not use glib calls outside of the test/ directory.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
All other functions are pushed into where they seemed to fit.
main.c is now linked separately into libmain.a and linked in by the various
DDXs.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This change implements the protocol for DRI2GetBuffersWithFormat, but
the bulk of the differences are the changes to the extension / driver
interface to make this function work. The old CreateBuffers and
DeleteBuffers routines are replaced with CreateBuffer and DeleteBuffer
(both singular).
This allows drivers to allocate buffers for a drawable one at a time.
As a result, 3D drivers can now allocate the (fake) front-buffer for a
window only when it is needed. Since 3D drivers only ask for the
front-buffer on demand, the real front-buffer is always created. This
allows CopyRegion impelemenations of SwapBuffers to continue working.
As with previous version of this code, if the client asks for the
front-buffer for a window, we instead give it the fake front-buffer.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kristian Høgsberg <krh@redhat.com>
Requires libselinux 2.0.79 or newer. Without this, libselinux will
check for policy updates on the netlink socket on basically every policy
lookup. Statistically speaking, they never happen, and the check
translates to at least one more syscall on basically every operation.
Instead, take control of the fd from the library, and check it in
WakeupHandler if it polls readable.
Also correct a link failure due to unresolved symbols. This
is arguably a libtool/ranlib/ld bug, that "may" be corrected
by linking all convenience libraries in a single one. But in
this case, it was preferred to just add a linker option to
Xfake_LDFLAGS, to force linkage of all libraries.
This corrects #19725.
No more #ifdef XKB, because you can't disable the build, and no more
noXkbExtension either.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of hardcoding base/pc105/us, allow users to change the defaults at
./configure time. Change the default model to be evdev on Linux.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
There were a few spots left in the source that were using the
--with-mesa-source defined headers or the now removed $(top_srcdir)/GL
directory. These aren't needed anymore as all the necessary source for
GLX is in $(top_srcdir)/glx.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Using GL for the PKG_CHECK_MODULES identifier multiple times means only
the first call will actually be used. Later calls will be skipped due to
GL_CFLAGS and GL_LIBS already being set. This changes DRI to using a
different identifier and DMX to just reusing GL_CFLAGS.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
The builtin-fonts configure option was removed, as it at best should
have been a runtime option. Instead, now it always register all "font
path element" backends, and adds built-ins fonts at the end of the
default font path.
This should be a more reasonable solution, to "correct" the most
common Xorg FAQ (could not open default font 'fixed'), and also don't
break by default applications that use only the standard/historical
X Font rendering.
Fixes for a few remaining build issues, omitted from commmit 6e85a8304b in error
Provide VENDOR_RELEASE in XORG_VERSION_CURRENT for XWin
Remove -static from linker flags for XWin
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
The Cygwin/X build has been broken for a long time, probably since modular X
This patch fixes up configure/makefile and some general build issues (#18568)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
All .a libraries were converted to .la, and instead of linking the
Xorg binary with a mix of .a and .la, and adding some libraries more
then once in the command line, etc, now it generates a single libxorg.la
from all the required convenience libraries, and links with a dummy
xorg.c (that should usually be the file with the main function...).
This removes the requirement of some things like libosandcommon and
libinit, that existed to circumvent problems when linking multiple
.a and .la in the final Xorg binary.
The "symbol table" is now generated dynamically, by a shell script,
with an embedded gawk parser that parses cpp output. The new file
sdksyms.sh is generated by hand by analyzing all Makefile.am's and
making it create a sdksyms.c file, that includes all sdk headers that
will add symbols for the Xorg binary. Module headers aren't read, and
a in 2 files it was required to add a "<hash>ifndef XorgLoader" around
declarations shared between the Xorg binary and libextmod. A few
other changes were added to other sdk headers, like preventing
multiple inclusion, or including other headers to satisfy dependencies.
This should be a lot more portable, and better (hopefully properly)
using libtool to generate convenience libraries.
This is done to actually change DIX_CFLAGS, as not all "modules" use
XORG_CFLAGS.
Also export the symbols that are required by other modules after
the change.
Note that it checks if support for symbol visibility is available by
the compiler, not if it is functional. It may have problems on non x86
architectures.
To disable the feature, just pass the option "--disable-visibility"
to the X Server configure script.
Unless using an alternate build schema, drivers built from a git
checkout will use the same "visibility" related CFLAGS used to compile
the X Server.