This appears to be essentially unused. The only known client-side
library for the SELinux extension is xcb, which does not look for the
name "Flask". The "SGI-GLX" alias for GLX appears to be a bit of
superstition at this point, NVIDIA's driver does not expose it and Mesa
does not check for it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Keith Packard <keithp@keithp.com>
The SendEvent request holds xEvent which is exactly 32 bytes long, no more,
no less. Both ProcSendEvent and SProcSendEvent verify that the received data
exactly match the request size. However nothing stops the client from passing
in event with xEvent::type = GenericEvent and any value of
xGenericEvent::length.
In the case of ProcSendEvent, the event will be eventually passed to
WriteEventsToClient which will see that it is Generic event and copy the
arbitrary length from the receive buffer (and possibly past it) and send it to
the other client. This allows clients to copy unitialized heap memory out of X
server or to crash it.
In case of SProcSendEvent, it will attempt to swap the incoming event by
calling a swapping function from the EventSwapVector array. The swapped event
is written to target buffer, which in this case is local xEvent variable. The
xEvent variable is 32 bytes long, but the swapping functions for GenericEvents
expect that the target buffer has size matching the size of the source
GenericEvent. This allows clients to cause stack buffer overflows.
Signed-off-by: Michal Srb <msrb@suse.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If the root window borderClip region is null, the PointInWindowIsVisible()
check fails if pointer warping is attempted on the root window, making
the warping operation bail out early.
Assume coordinates always lay inside the root window for this case,
the actual position will be clamped later within screen coordinates anyway.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Delay removing the client from these two queues until all potential
I/O has completed in case we mark the client as ready for reading or
with pending output during the close operation.
Bugzilla: https://bugs.freedesktop.org/100957
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Found when the meson conversion set the symbol to defined, instead of
defined to 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
None of this is actually wired up to anything, so we can also remove the
devPrivates from the DamageRec. The DamageExtRec is what would need
devPrivates for selinux labeling, in principle.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This will be used by in-server features that need to react to property
changes. The first one will be _XWAYLAND_ALLOW_COMMITS.
Signed-off-by: Adam Jackson <ajax@redhat.com>
[Pekka: add commit message body]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Instead of just the atom. No functional change.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The root window, and by extension any damage records referencing it,
may be destroyed before shared pixmaps referencing it, which resulted in
use-after-free / double-free in PixmapStopDirtyTracking.
Fixes: b5b292896f ("prime: Sync shared pixmap from root window instead of screen pixmap")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The screen pixmap doesn't receive updates while there's a Present flip
window.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
A client which is attended while a grab is blocking execution of its
requests needs to be placed in the saved_ready_clients list so that it
will get scheduled once the grab terminates. Otherwise, if the client
never sends another request, there is no way for it to be placed in
the ready_clients list.
v2: Wrap comment above mark_client_saved_ready.
Remove test for OS_COMM_IGNORED which will always be true.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99333
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The custom os/os.O library reuses *.o files of os/libos.la.
The current rule assumes automake puts all the objects into per-target
am__*_la_OBJECTS variable. At least with AC_REPLACE_FUNCS, this no
longer holds (as wanted objects are put into LTLIBOBJS instead).
Depend on automake's result, the *.la library instead, to express demand
of any its dependencies being built.
Should be fixing randomly occuring "undefined reference to `strlcpy'"
errors when linking Xvfb and other DDX-es that could use os.O.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Commits 816015648f and
fee0827a9a made it so that
wl_keyboard::enter doesn't result in X clients getting KeyPress events
while still updating our internal xkb state to be in sync with the
host compositor.
wl_keyboard::leave needs to be handled in the same way as its
semantics from an X client POV should be the same as an X grab getting
triggered, i.e. X clients shouldn't get KeyRelease events for keys
that are still down at that point.
This patch uses LeaveNotify for these events on wl_keyboard::leave and
changes the current use of KeymapNotify to EnterNotify instead just to
keep some symmetry between both cases.
On ProcessDeviceEvent() we still need to deactivate X grabs if needed
for KeyReleases.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
I think it is possible that output could get queued to a client during
CloseDownClient. After it is removed from the pending queue, active
grabs are released, the client is awoken if sleeping and any work
queue entries related to the client are processed.
To fix this, move the call removing it from the output_pending chain
until after clientGone has been set and then check clientGone in
output_pending_mark.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1382444
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[This was originally a workaround for a client-side resource leak:
http://lists.freedesktop.org/archives/xorg-devel/2012-November/034555.html
Obviously that's a broken app, but the performance problem it
illustrates - that walking the linked list ends up burning all your CPU
time - is real enough. - ajax]
v2: Replace with a shorter code sequence which computes the same
results for all but numBits == 7
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a valuator mask setter for setting absolute coordinate combined
with unaccelerated motion deltas. This will later be used by Xwayland
to combine a wl_pointer.motion() event with the unaccelerated delta of
a wp_relative_pointer.relative_motion() event.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
GetImage is allowed to return window border contents, so don't remove
that from the returned image.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows us to remove darwinEvents_lock() and darwinEvents_unlock()
and remove the serverRunning hack from dix
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This function will be called when a pointer is grabbed non-root window
set as the 'confineTo'. This will enable the ddx to handle the
confinement their own way.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This new vfunc will be called, if set, after a client has issued a
WarpPointer request. This is necessary for implementing pointer warp
emulation in Xwayland.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
pClient does not contain a live value after the transition to lists
https://bugs.freedesktop.org/show_bug.cgi?id=97765
Application Specific Information:
X.Org X Server 1.18.99.1 Build Date: 20160910
=================================================================
==16921==ERROR: AddressSanitizer: global-buffer-overflow on address 0x000108ce3834 at pc 0x000108880766 bp 0x7000045f76c0 sp 0x7000045f76b8
READ of size 4 at 0x000108ce3834 thread T6
#0 0x108880765 in SmartScheduleClient dispatch.c:365
#1 0x10887ecc5 in Dispatch dispatch.c:422
#2 0x1088c05f1 in dix_main main.c:301
#3 0x1082aabba in server_thread quartzStartup.c:66
#4 0x7fffc5f16aaa in _pthread_body (libsystem_pthread.dylib+0x3aaa)
#5 0x7fffc5f169f6 in _pthread_start (libsystem_pthread.dylib+0x39f6)
#6 0x7fffc5f161fc in thread_start (libsystem_pthread.dylib+0x31fc)
Regressed-in: 8f1edf4bd3
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This ensures that the deviceProc is never called while the input
thread is processing data from the device.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently with PRIME if we detect a secondary GPU,
we switch to using SW cursors, this isn't optimal,
esp for the intel/nvidia combinations, we have
no choice for the USB offload devices.
This patch checks on each slave screen if hw
cursors are enabled, and also calls set cursor
and move cursor on all screens.
Cc: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This is a preparation patch for adding prime hw-cursor support.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Fix a couple of copy-and-paste errors preventing FocusIn grabs from working.
Perhaps the extension version should be bumped though to distinguish between
working and non-working extension versions.
Signed-off-by: Michael Thayer <michael.thayer@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make sure the whole event is initialized, instead of leaving the pad
bytes unset.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Eliminates all of the fd_set mangling in the server main thread
v2: Listen for POLLOUT while writes are blocked.
v3: Only mark client not ready on EAGAIN return from read
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This converts the dispatch loop into using a list of ready clients
instead of an array. This changes the WaitForSomething API so that it
notifies DIX when a client becomes ready to read, instead of returning
the set of ready clients.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The intermediate grabState, "GrabKickout", was used to trigger
dispatch into going back to WaitForSomething after doing a GrabServer
so that the set of ready clients would be recomputed to match what the
server should be processing. As we only process one client per
WaitForSomething call, we will always hit WaitForSomething after
finishing the current client, and so don't need any special case here.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Instead of having scheduling done in two places (one in
WaitForSomething, and the other in SmartScheduleClient), just stick
all of the scheduling in SmartScheduleClient.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the last uses of fd_set from the server interfaces
outside of the OS layer itself.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
With no users of the interface needing the readmask anymore, we can
remove it from the argument passed to these functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This new libXfont API eliminates exposing internal X server symbols to
the font library, replacing those with a struct full of the entire API
needed to use that library.
v2: Use libXfont2 instead of libXfont_2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Some games incorrectly use non-premultiplied ARGB cursor data, presumably
because that's what Windows uses. On some hardware (and with SWcursor),
this breaks areas of the cursor which are supposed to be transparent
(and presumably also translucent areas, but that's less noticeable).
This change checks for pixels with alpha == 0 and any non-alpha component
!= 0. If any such pixel is found, the data is assumed to be
non-premultiplied and fixed up by multiplying the RGB components with the
alpha component.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92309
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The screen block and wakeup handlers are the only ones which provide a
well known ordering between the wrapping layers; placing these as
close as possible to the server blocking provides a way for the driver
to control the flow of execution correctly.
Switch the shadow code to run in the screen block handler so that it
now occurrs just before the server goes to sleep.
Switch glamor to call down to the driver after it has executed its own
block handler piece, in case the driver needs to perform additional
flushing work after glamor has called glFlush.
These changes ensure that the following modules update the screen in
the correct order:
animated cursors (uses RegisterBlockAndWakeupHandlers dynamically)
composite (dynamic wrapping)
misprite (dynamic wrapping)
shadow (static wrapping)
glamor (static wrapping)
driver (static wrapping)
It looks like there's still a bit of confusion between composite and
misprite; if composite updates after misprite, then it's possible
you'd exit the block handler chain with the cursor left hidden. To fix
that, misprite should be wrapping during ScreenInit time and not
unwrapping. And composite might as well join in that fun, just to make
things consistent.
[v2] Unwrap BlockHandler in shadowCloseScreen (ajax)
[v3] ephyr: Use screen block handler for flushing changes
ephyr needs to make sure it calls glXSwapBuffers after glamor finishes
its rendering. As the screen block handler is now called last, we have
to use that instead of a registered block/wakeup handler to make sure
the GL rendering is done before we copy it to the front buffer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
A single provider can be both a offload and source slave at the same time,
the use of seperate lists breaks in this case e.g. :
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 0 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 0 name:modesetting
xrandr --setprovideroutputsource 1 0x7b
xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 1 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 1 name:modesetting
xrandr --setprovideroffloadsink 1 0x7b
xrandr --listproviders
Providers: number : 3
Provider 0: id: 0x7b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 2 associated providers: 2 name:modesetting
Provider 1: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Provider 2: id: 0x46 cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 5 associated providers: 2 name:modesetting
Not good. The problem is that the provider with id 0x46 now is on both
the output_slave_list and the offload_slave_list of the master screen.
This commit fixes this by unifying all 3 lists into a single slaves list.
Note that this does change the struct _Screen definition, so this is an ABI
break. I do not expect any of the drivers to actually use the removed / changed
fields so a recompile should suffice.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
There are no in-tree consumers of the audit hooks, and they are in any
case redundant with the dtrace dispatch hooks. Neither is there any
in-tree user of the core request dispatch hook. The extension hook is
only used for non-default security cases, but in the absence of LTO we
always have to take the function call into XaceHookDispatch to find out
that there's no callback registered.
Cc: Eamon Walsh <ewalsh@tycho.nsa.gov>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This is an ABI break, in that we now pass NULL to a function that hasn't
accepted it before.
Alex Goins had a different patch for this but it wasn't symmetrical, it
freed something in a very different place than it allocated it, this
attempts to retain symmetry in the releasing of the backing bo.
v2: use a new toplevel API, though it still passes NULL to something
that wasn't expecting it.
v3: pass -1 instead of 0.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alex Goins <agoins at nvidia.com>
In patch 137ac094e7, Adam moved an
expensive call to UpdateCurrentTime out of the main dispatch
loop. That's a good change as the original fix from Chase was a bit
expensive. However, it breaks grab processing and so a couple of the
calls to UpdateCurrenTime need to be removed.
Input event processing can generate a stream of events; a button press
that activates a grab will send a press followed by a sequence of
enter/leave events. All of these should have the same time stamp on
the wire as they occur at the 'same' time.
More importantly, the grab time recorded in the device is pulled from
currentTime after all of the events are delivered, so if currentTime
doesn't match the time in the device event, then future grab
modifications will fail as the time marked in the device will be
'later' than the grab time known to the client (which is defined as
the timestamp from the activating input event).
A bit of history here -- it used to be that currentTime was driven
*entirely* by input events; those timestamps didn't even have to be
related to the system time in any way. Then we started doing ICCCM
stuff and people got confused when PropertyNotify events would have
the same timestamp even when delivered minutes apart because no input
events were delivered.
We added code in the server to go update the time, but only if no
input events were pending (so that the clock "wouldn't" go
backwards). The only places where this is necessary is in request
processing which may generate an event with a timestamp, and there
only at the very top of the request processing code so that the whole
request would be processed at the 'same time', just like events.
cc: Chase Douglas <chase.douglas@canonical.com>
cc: Peter Hutterer <peter.hutterer@who-t.net>
cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
These are local to inputthread.c; the ones in globals.c aren't
declared in any header file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Now that input is threaded, malloc can be used at event time to resize
the touchpoint buffer as needed.x
v2: Remove "Need to grow the queue means dropping events."
from comment as it no longer applies. (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>