This uses a standard conversion function to do the conversion.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just use new macros to access scrn->screen.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
migrate to new helper API.
This just wraps all the obvious uses of xf86Screens[pScreen->myNum],
and should be fairly simple to review.
v2: remove commented out lines.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These are just simple functions that we should start migrating drivers
to using.
The end goal is to remove xf86Screens and screenInfo from the ABI.
This includes a define XF86_HAS_SCRN_CONV that drivers can ifdef to provide
their own copies. I'll probably post a generic compat.h file for drivers later.
v2: add asserts.
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently if we claim a slot for a PCI driver, we never let it go properly,
this prevents the fallback probe from reusing the slot, even though it
isn't claimed for that pci slot.
So if you set the modesetting driver to point at a specific kms device,
that isn't a PCI device (i.e. USB dongle), then the modesetting driver
loads, the pci probe tries to bind the config slot to the primary PCI
device, however we then check the kms device bus id to discover it
isn't valid. However we don't remove the claim on the slot. Next the
old probe function is called and there is no slots to claim.
This patch fixes that and converts the pciSlotClaimed boolean into
a counter, and changes the unclaim api to take a device pointer
to remove from the entity.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to use udev for gpu enumeration, we need to init udev earlier
than input initialisations. This splits the config init stuff so that udev
pre init sets up before output initialisation.
this is just a prepatory patch, doesn't change anything major.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add the modesetting driver to the fallback list on Linux, after vesa
before fbdev.
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The functions are already declared in xf86xv.h
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to generate a 256-entry ramp in [0,65535] which covers the full
range, one must mupliply eight-bit values not by 256 but rather by 257.
Many years back – well before the RANDR extension was written, and
before xorg@fdo – a similar bug fix was made to the DIX for converting
client-supplied eight-bit color values into sixteen-bit values.
Noticed by: Elle Stone and Graeme Gill.
Signed-off-by: James Cloos <cloos@jhcloos.com>
If a device was enabled before the VT switch, re-enabled it. Otherwise leave
it as is, there was probably a reason why it was disabled.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This is the result of re-running the 'x-indent.sh' script over
xf86vmode.c to clean up the disaster caused by broken syntax in the
file.
Signed-off-by: Keith Packard <keithp@keithp.com>
Inside the unfinished XF86VIDMODE_EVENTS #ifdef block the
function definition for xf86VidModeNotifyEvent had an extra ');'
before the prototype argument declarations. This was harmless for the
compiler as the code never gets used, but completely messed up the
file re-indentation. This patch removes the spurious characters in
preparation for re-indenting the file.
Signed-off-by: Keith Packard <keithp@keithp.com>
This reverts commit 55f552adb6.
This appears to cause a crash at init time instead of close.
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Acked-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
As a PE platform, all symbols in both EXEs and DLLs must be resolved
at link time. As Xorg modules depend on symbols in the Xorg
executable, we must build Xorg before its modules, creating an implib
from the former which is used to link the latter. This implib must
then be installed in order to build the drivers.
Currently only two drivers are supported on Cygwin: xf86-video-dummy
(to replace Xvfb/Xfake) and xf86-video-nested (to replace Xnest/Xephyr).
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Cygwin doesn't have ELF rpath capabilities, so these libraries need
to be loaded before the drivers (namely dummy and nested) which
depend on their symbols.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This is necessary when building Xorg and XWin simultaneously, otherwise
undefined symbol errors result in sdksyms.c.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Cygwin libraries use the .dll extension and "cyg" prefix in place of "lib".
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
This will be necessary to port Xorg to Cygwin, but other platforms may
find this useful as well.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Excerpt from http://lists.x.org/archives/xorg-devel/2011-March/020481.html:
The Xorg & xorg.conf substitutions are leftover from the transitional
period where some distros were building our sources with the XFree86
and XF86config names until they had time to adjust the rest of their
packages/installer/config code to the new names.
This will fix inconsistencies and prevent the creation of new unneeded
sed patterns.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Excerpt from http://lists.x.org/archives/xorg-devel/2011-March/020481.html:
The Xorg & xorg.conf substitutions are leftover from the transitional
period where some distros were building our sources with the XFree86
and XF86config names until they had time to adjust the rest of their
packages/installer/config code to the new names.
This will fix inconsistencies and prevent the creation of new unneeded
sed patterns.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
indent sometimes adds a blank line between the type and the name in a
function declaration that includes _X_EXPORT, so handle that before
the files are re-indented.
Signed-off-by: Keith Packard <keithp@keithp.com>
Rename functions/macros from list_* to xorg_list_*
Rename struct from struct list to struct xorg_list.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
In-sed-I-trust: Peter Hutterer <peter.hutterer@who-t.net>
We don't need anything from that header (which defines /proc & kernel
structures for process information), and it causes some namespace conflicts.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
342f3eac84 introduced a bug, 'base' is
incremented before use. The old code corrected this when unmapping, so
the new code should too.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
libdix.a is already provided by XSERVER_LIBS. Including it in libxorgxkb
results can result in duplicate symbols landing in the Xorg binary on some
configurations (buggy glibtool on darwin).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Always install XAA SDK headers so drivers still build even with
--disable-xaa
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Some driver modules try to unload submodules that are now built-in.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't want to unconditionally use I/O routines here, since if the
driver is using mmap'd VGA ports then the I/O handle won't be set up.
Tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Linux kernels since 2.6.38 (March 2011) have an VT KB mode K_OFF in
which special keys (like Ctrl+C) are not interpreted and input is not
buffered. Use of this mode over K_RAW removes the need for a
xf86ConsoleHandler to drain the VT input buffer, removing the grief it
causes when it goes wrong or is (de)initialized out-of-order. (This
also saves a few needless context switches per key event.)
If K_OFF is not defined or not understood by the kernel, K_RAW and the
previous method is used as a fall-back.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Arthur Taylor <art@ified.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>