Using this call simplifies callers that don't know if the mask bit is set.
Before:
if (valuator_mask_isset(mask, valnum))
value = valuator_mask_get_double(mask, valnum));
else
value = someothervalue;
Now:
if (!valuator_mask_fetch_double(mask, valnum, &value))
value = someothervalue;
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
--disable-pciaccess, used together with --disable-module-int10, can be used to
disable all pci code inside the server.
Note that XSERVER_LIBPCIACCESS was previously used only in the driver side and
now it defines also whether the library is used inside the server. Also,
XORG_BUS_PCI automake variable is introduced to track PCI code needs.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
People that don't want VGA arbiter active can go to the library and enable the
stubs there.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Co-authored-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
miPointerSetPosition traditionally took coordinates on a per-screen basis,
triggering a screen switch when these went out-of-bounds. For absolute
devices, this prevented screen crossing in the negative x/y direction.
This patch changes the event generation patch to handle screen coordinates
in a desktop range (i.e. all screens together). Screen switches are
triggered when these coordinates are not on the current screen.
This unifies the pointer behaviour of single ScreenRec multihead and
multiple ScreenRecs multihead in that the cursor by default moves about the
whole screen rather than be confined to one single screen. The
transformation matrix may then be used to actually confine the cursor to the
screen again.
Note: fill_pointer_events has to deal with several different coordinate
systems. Make sure you read the comment before trying to understand the code.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For Zaphod mode screen crossing handling we need to know the size of all
screens together (i.e. the whole desktop size). Store that in the screenInfo to
have it readily available in events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
udev_enumerate_add_match_tag() and udev_monitor_filter_add_match_tag()
are mostly optimizations, hence simply skip these calls if they are not
available in the installed version of libudev.
This should fix the build on older versions of udev.
[airlied: fixes tinderbox failures on RHEL6]
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
For scroll wheel support, we used to send buttons 4/5 and 6/7 for
horizontal/vertical positive/negative scroll events. For touchpads, we
really want more fine-grained scroll values. GetPointerEvents now
accepts both old-school scroll button presses, and new-style scroll axis
events, while emitting both types of events to support both old and new
clients.
This works with the new XIScrollClass to mark axes as scrolling axes.
Drivers mark any valuators that send scroll events with SetScrollValuator.
(Currently missing: the XIDeviceChangeEvent being sent when a driver changes
a scroll axis at run-time. This can be added later.)
Note: the SCROLL_TYPE enums are intentionally different values to the XI2
proto values to avoid copy/overlapping range bugs.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, prep work for future changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Return errors instead of silently ignoring them.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
POINTER_EMULATED merely sets XIPointerEmulated in the generated
DeviceEvent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
To be used for smooth scrolling with future driver APIs, replacing
Rel Vert Wheel and Rel Horiz Wheel axes, which have not been used in any
open driver to date.
Combined with double-granularity ValuatorMasks, these axes allow for
fine-grained scroll data to be sent to clients. Future commits allow
drivers to post these scroll axes to
QueuePointerEvents/GetPointerEvents, which take care of emulating legacy
scroll button events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Change the last real user of a split integer/fractional co-ordinate
system, DeviceIntRec's last->{valuators,remainder} to just have one set
of doubles.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change the DeviceEvent InternalEvent to use doubles for its valuators,
instead of data and data_frac.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Change RawDeviceEvent to use doubles for valuators internally, rather
than data(_raw) and data(_raw)_frac.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This widens almost all of the float-using code in ptrveloc.[ch] to
doubles, other than values coming from properties which are specified to
be floats by the property API.
Bumps input API to v14 as this changes the AccelScheme signature, as
used by xf86-input-synaptics.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Add API for valuator_mask that accepts and returns doubles, rather than
ints. No double API is provided for set_range at the moment.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Switch the ValuatorMask struct to using doubles instead of ints for the
actual values. Preserve the old int API, and (attempt to) round towards
zero for values we return.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Add a flags member which will be copied wholesale into the resultant
xXIDeviceEvent.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
1) The error attribute appeared in gcc-4.3
2) The return type of __builtin_constant_p is int
3) Sun Studio 12.0 and later builtin support for __builtin_constant_p
Found by Tinderbox.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
The more recent inclusions of this file haven't been checking for
HAVE_STDINT_H, so might as well make the older ones consistent.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
If the address of the swapped memory location is known at compile time,
we can check its alignment at no runtime cost and use lswapl instead.
text data bss dec hex filename
before: 1872820 52136 78040 2002996 1e9034 hw/xfree86/Xorg
after: 1864396 52136 78040 1994572 1e6f4c hw/xfree86/Xorg
bswap instructions: 131 -> 308 (used in lswapl)
rol instructions: 943 -> 1174 (used in lswaps)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Should be safe since cpswap isn't used on pointers.
text data bss dec hex filename
before: 1875588 52136 78040 2005764 1e9b04 hw/xfree86/Xorg
after: 1872820 52136 78040 2002996 1e9034 hw/xfree86/Xorg
bswap instructions: 5 -> 131 (used in lswapl)
rol instructions: 811 -> 943 (used in lswaps)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
The original macros are retained (instead of replacing them with inline
functions) because of implicit type promotion. That is, an int16 passed
to an inline function taking int32 would be implicitly promoted to int32
without a warning.
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
gcc generates better code with fabs() anyway.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Appears to be leftover from the Kerberos code deleted in 2007
(commit dfbe32b5b8).
Nothing left ever set clientState to ClientStateAuthenticating
Skipped over 1 to preserve existing enum numbering.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Use new per-screen privates API instead.
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Appear to be leftovers from the XC-QUERY-SECURITY code deleted in 2007
(commit 375864cb74).
Nothing left ever set clientState to ClientStateCheckingSecurity.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
"configure --with-int10" is not a valid configuration, and the check for
sys/vm86.h and sys/io.h is not used. Delete it.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Gaetan Nadon wrote:
Alan Coopersmith wrote:
"I think we recently dropped PC98 support from the X server, so I'd
be okay with dropping the documentation now".
Let's make them be right, shall we?
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
InputOptions is not switched to use struct list for a future patch to unify
it with the XF86OptionRec.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This is a set of macros to provide a struct list-alike interface for classic
linked lists such as the XF86OptionRec or the DeviceIntRec. The typical
format for these is to have a "struct foo *next" pointer in each struct foo
and walk through those. These macros provide a few basic functions to add to,
remove from and iterate through these lists.
While struct list is in some ways more flexible, switching legacy code to
use struct list is not alway viable. These macros at least reduce the amount
of open-coded lists.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
getevents.c already had that function, but XKB was manually initializing it,
causing bugs when the event structure was updated in one place but not the
other.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GetMaster() currently requires an attached slave device as parameter,
resuling in many calls being IsFloating(dev) ? dev : GetMaster(...);
Add two new parameters so GetMaster can be called unconditionally to get the
right device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Add support for multi-seat-aware input device hotplugging. This
implements the multi-seat scheme explained here:
http://www.freedesktop.org/wiki/Software/systemd/multiseat
This introduces a new X server switch "-seat" which allows configuration
of the seat to enumerate hotplugging devices on. If specified the value
of this parameter will also be exported as root window property
Xorg_Seat.
To properly support input hotplugging devices need to be tagged in udev
according to the seat they are on. Untagged devices are assumed to be on
the default seat "seat0". If no "-seat" parameter is passed only devices
on "seat0" are used. This means that the new scheme is perfectly
compatible with existing setups which have no tagged input devices.
Note that the -seat switch takes a completely generic identifier, and
that it has no effect on non-Linux systems. In fact, on other OSes a
completely different identifier scheme for seats could be used but still
be exposed with the Xorg_Seat and -seat.
I tried to follow the coding style of the surrounding code blocks if
there was any one could follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LogVHdrMessageVerb allows a custom header to be inserted in a log message,
between the Log system's MessageType string, and a formatted variable
message body. The custom header can itself be a formatted variable string.
These functions can be used, for example, by driver abstraction layers to
format specific driver messages in a standard format, but do it in a way
that is efficient, obeys the log-layers verbosity settings, and is safe
to use in signal handlers (because they don't call malloc), even for
types besides X_NONE.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The composite extension spec says that window background painting
should be inhibited when the subwindow redirection mode is set to
manual.
This eliminates the ugly flashing effect when compiz unredirects a
fullscreen window.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Owen Taylor <otaylor@fishsoup.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
RawEvents are supposed to be events coming from the driver. When warping the
pointer, this should not generate a raw event.
X.Org Bug 30068 <http://bugs.freedesktop.org/show_bug.cgi?id=30068>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add four new private XKB actions for debugging:
* PrGrbs: print active grabs to the log file
* Ungrab: ungrab all currently active grabs
* ClsGrb: kill clients with active grabs
* PrWins: dump the current window tree to the log file
To use these, you need to modify your XKB maps, e.g. the following to
have Ctrl+Alt+(F9-F12) mapped to the above:
- compat/xfree86:
interpret XF86LogGrabInfo {
action = Private(type=0x86, data="PrGrbs");
};
interpret XF86Ungrab {
action = Private(type=0x86, data="Ungrab");
}
interpret XF86ClearGrab {
action = Private(type=0x86, data="ClsGrb");
}
interpret XF86LogWindowTree {
action = Private(type=0x86, data="PrWins");
}
- symbols/pc:
key <FK09> { type="CTRL+ALT", [ Return, XF86LogGrabInfo ] };
key <FK10> { type="CTRL+ALT", [ Return, XF86Ungrab ] };
key <FK11> { type="CTRL+ALT", [ Return, XF86ClearGrab ] };
key <FK12> { type="CTRL+ALT", [ Return, XF86LogWindowTree ] };
At the moment, this only works if the grabbing client continues to call
AllowEvents, as the server does no event processing at all when a device
is frozen.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rewrite PrintWindowTree to make it actually tell you what you want to
know.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
No functional changes, prep work for future changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Implements pointer barriers as specified by version 5 of the XFIXES
protocol. Barriers are axis-aligned, zero-width lines that block pointer
movement for relative input devices. Barriers may block motion in either
the positive or negative direction, or both.
v3:
- Fix off-by-one in version_requests array
- Port to non-glib test harness
- Fix review notes from Søren Sandmann Pedersen, add tests to match
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Providing an argument to return in a function with void return type
is not allowed by the C standard, and makes the Sun compilers unhappy.
(They actually flag it as an error, unless using a new enough version
to be able to downgrade it to a warning with "-features=extensions".)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
In some cases, knowing about the device model number and the device's vendor
is important to activate product-specific settings. Since this is
nonetheless driver-specific, only provide the property but don't do anything
with it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Since the server has little choice (or even knowledge) of the actual device
node used by the driver, this property is merely provided for
standardisation. It is up to the driver to set it to the appropriate value,
usually a device node in the form of /dev/input/event0 or similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
This struct was unused and has been effectively removed in
commit 633b81e8ba
Refs: xorg-server-1.10.0-133-g633b81e
Remove the remainder, with an ABI bump to 13.0.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Compare two version numbers in the major.minor form.
Switch the few users of manual version switching over to the new function.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This isn't currently used by any of the callers but it will likely be in the
future.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Previously, it only took DeviceEvents, but it would be much more useful
if it took InternalEvents. Any event that activates a grab must still
be a DeviceEvent, so put in a check to enforce this.
Change all callers to make the appropriate casts.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The macro is sufficient if called during a development cycle, but not
sufficient information when triggered by a user (e.g.
https://bugzilla.redhat.com/show_bug.cgi?id=688693).
Expand what this does to print the event content and a backtrace, so at
least we know where we're coming from. Only the first 32 bytes are printed
since if something goes wrong, the event we have is almost certainly an
xEvent or xError, both restricted to 32 bytes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Grabbing an SD device temporary floats the device but we must not release
the buttons. Introduced in
commit 9d23459415
Author: Peter Hutterer <peter.hutterer@who-t.net>
Date: Fri Feb 25 11:08:19 2011 +1000
dix: release all buttons and keys before reattaching a device (#34182)
X.Org Bug 36146 <http://bugs.freedesktop.org/show_bug.cgi?id=36146>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Does what it says on the box: returns the deepest child window in a
given sprite's trace.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The interface to RegionInit():
RegionInit (RegionPtr pReg, BoxPtr rect, int size);
is very confusing because it doesn't take a list of boxes, it takes
*one* box, but if that box is NULL, it initializes an empty region
with 'size' rectangles preallocated.
Most callers of this function were correctly passing either NULL or
just one box, but there were three confused cases, where the code
seems to expect a region to be created from a list of boxes.
This patch adds a new function RegionInitBoxes() and fixes those
instances to call that instead.
And yes, the pixman function to initialize a region from a list of
boxes is called init_rects() because pixman is also awesome.
V2: Make RegionInitBoxes() return a Bool indicating whether the call
succeeded, and fix the callers to check this return value.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Søren Sandmann <ssp@redhat.com>
Don't confuse users with a return type of short, that's even less indicative
that it returns 0/non-0 than "int".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
commit 678f5396c9 only fixed the
initialization, not the copy. After a slave device change, the valuator
were out of alignment again.
X.Org Bug 36119 <http://bugs.freedesktop.org/show_bug.cgi?id=36119>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
each DDX has its own copy, I've taken the darwin one,
though I'm not sure why it needs the pOldClip piece that nobody
else has and the commit msg is like an "Updates from magic land"
type message.
This removes the main uses of pWin->winSize from the DDXen.
v2: drop old clip like ajax suggests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes the struct, but keeps InitAbsoluteClassDeviceStruct as
a no-op and preserves related struct layout.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
AX_TLS detects when toolchains support __thread or __declspec(thread),
but existing code assumed __thread.
This also adds a check to configure.ac to error out if TLS is requested
but unsupported.
Found-by: Tinderbox
http://tinderbox.x.org/builds/2011-03-22-0007
Regression-from: 82b1eaa6ca
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Tom Fogal <tfogal@alumni.unh.edu>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
long is needlessly long on LP64.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
size needn't be a long. No change on ILP32 but, combined with the
previous change, 56 -> 40 bytes on LP64.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
unsigned long is needlessly large on LP64. Use uint32_t instead.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
CARD32 is being returned by GetTimeInMilis(), so use it consistently.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This intends to clean up the predictable accel struct
from purely scheme-related things like input properties,
as they would be useless in other use cases such
as wheel acceleration.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Nobody can have been using this, it's never called from extension init.
XI2 device properties should now be a functional replacement.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For Pointer Barriers, the movement mode is important and must be passed
through.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Use _LP64 (verified on gcc and sun compilers) instead of _XSERVER64 in
internal header usage, and always define _XSERVER64 for modules if _LP64
is defined. Prevents differing xorg-server.h between 32 and 64 bit
packages.
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The removal of the double-use will cause some suble bugs as some conditions
to check for the dev->u.master case were broken and also evaluated as true
if lastSlave was set (instead of master).
Also breaks the input ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
In some cases, we don't know/care whether we want the master pointer or keyboard
for a device. Add a new type MASTER_ATTACHED to return the master this
device is attached to.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
This makes it possible to init a scheme in one init call, so we
get rid of the tightly coupled two-phase init used before.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some event types (notably Expose and GraphicsExpose) require multiple
events, a la XI 1.x. Bring the EventToCore API in line with EventToXI's
and allow it to generate multiple events.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rename the return mask values for EventIsDeliverable:
* CORE_MASK -> EVENT_CORE_MASK
* XI_MASK -> EVENT_XI1_MASK
* XI2_MASK -> EVENT_XI2_MASK
* DONT_PROPAGATE_MASK -> EVENT_DONT_PROPAGATE_MASK
And don't undef them in dix/events.c, since they're supposed to be
global.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The two functions have identical semantics, including safely returning
NULL when NULL is passed in (which POSIX strdup does not guarantee).
Some callers could probably be adjusted to call libc strdup directly,
when we know the input is non-NULL.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
We don't modify "value", make it official.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan-de-oliveira@nokia.com>
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Expecting the caller to free the mask requires us to keep it in a single
memory block (which may be an issue lateron), aside from leaving the API
asymetrical. Provide valuator_mask_free() to free the memory and reset the
mask pointer to NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
This just reserves the slot in the ABI. Confining cursors to CRTCs will
come soon.
v2: Just reserve the slot.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Change CheckPassiveGrabsOnWindow to return the GrabPtr it used (or NULL
if none) rather than a boolean, and export it. Also add an additional
boolean 'activate' parameter; use TRUE for existing behaviour, or FALSE
to only find the grab and then return it.
This will be used in forthcoming touch patches to find the grabs, rather
than open-coding same.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make it non-static, add to headers.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
XYToWindow calculates the position of the cursor and updates the sprite
trace, but does nothing else with the device. Pass a SpritePtr instead
so we can update an alternate focus instead of hardcoding the device's
sprite. Also make this function non-static, so we can use it elsewhere.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Since FixUpEventFromWindow only uses the sprite trace to determine the
window stack, pass in a sprite instead of hardcoding the device sprite,
so we can deliver to windows other than the one currently containing the
sprite.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Change its definition to be more in line with other structs, so we can
use it from input.h.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
Rename compUpdateWindow to compPaintWindowToParent and split the child
walk to compPaintChildrenToWindow. Calling compPaintChildrenToWindow
allows an arbitrary subtree to be updated, instead of having to update
all the windows. This will be used to make sure all the descendants are
copied to the parent when the parent window contents need to be accessed
in IncludeInferios sub-window mode.
WindowRec has a new member 'damagedDescendants' that is used to keep
track of which subtrees need updating. When a window is damaged,
'damagedDescendants' will be set for all the ancestors, and when a
subtree is updated, the tree walk can be stopped early if no damaged
descendants are present.
CompScreenRec no longer needs the 'damaged' member since the root
window's 'damagedDescendants' provides the same information.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Pass the subWindowMode from the GC/source Picture to SourceValidate.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When we send BadValue back to the client for having invalid mask bits,
at least tell them what the (first) invalid bit was.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Will be used outside dix/events.c in proceeding XI 2.1 MT changes.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The definition of rClient was duplicated across three source files, so
move it to resource.h.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Input drivers may use valuator masks for internal state. Having all the
valuator_mask_* functions available will help.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Bump ABI_XINPUT_VERSION minor.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
An interface is provided for figuring out the PID and process name of
a client. Make some existing functionality from SELinux and IA
extensions available for general use.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Provides a portable implementation of this common allocating sprintf()
API found in many, but not yet all, of the platforms we support.
If the platform provides vasprintf() we simply wrap it, otherwise we
implement it - either way callers can use it regardless of platform.
Since not all platforms guarantee to NULL out the return pointer on
failure, we don't either, and require callers to check the return
value for -1.
The old Xprintf() API is deprecated, but left for compatibility for now.
The new API is added in a new header so that it can be used in parts of
the server such as hw/xfree86/parser that don't include all the server
headers.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
The following happens otherwise (with -Wall -Werror):
| In file included from /usr/include/X11/Xfuncs.h:47,
| from ../../include/misc.h:112,
| from ../../include/screenint.h:52,
| from ../../include/scrnintstr.h:52,
| from ../../dix/cursor.c:58:
| /usr/include/string.h:534: error: conflicting types for ‘xstrcasecmp’
| ../../include/os.h:488: note: previous declaration of ‘xstrcasecmp’ was here
| /usr/include/string.h:538: error: conflicting types for ‘xstrncasecmp’
| ../../include/os.h:493: note: previous declaration of ‘xstrncasecmp’ was here
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
This bumps the supported RandR protocol version and adds the dispatch
hooks needed to call the new functions
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Add the new protocol handlers for XSync 3.1 to the
dispatch tables and report support for Sync protocol
version 3.1.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
-Add fence sync objects
-Add fence sync devPrivates
-Add a X sync module screen private
-Add wrappable functions to create and destroy
fence sync objects
-Give fence sync objects wrappable functions to
trigger, test, and reset their 'triggered' value.
-Give fence sync objects wrappable functions to
notify driver when adding/removing triggers to/
from the sync object.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Most extensions have a version defined
in the protocol headers, and also in the
server's protocol-versions.h. The latter
defines which version the server advertises
support for. Sync wasn't included in
protocol-versions.h, and was advertising
support for whatever was in the protocol
headers the server was built against.
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>