ConfigNotify is set by DRI2ScreenInit, but not restored to
previous state on close. Fix it.
(I'm preparing a patch for xf86-video-nouveau which detects GPU lockup
after dri2 init and it needs to reinitialize dri2)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Use the new event types so we can pass a valid SBC value to clients.
Fix up the completion calls to use CARD32 instead of CARD64 to match
the new field size.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Introduced in e3f296d91d, when the ifdef DEBUG
around the whole block was removed, but only two of the three ErrorF
switched to DebugF.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
libxorg.la served to collect all the Xorg convenience libraries into one
massive archive to link into Xorg. This made things easy for symbol
resolution, but it tremendously slowed down the build since each change
caused libxorg.la to be rebuilt. This is an extremely slow process of
extracting all the objects from the sub-libraries and recombining them.
Instead, the archives are linked directly into Xorg. The order of the
libraries had to be tweaked a bit to make symbols resolve correctly with
the lower level code moving later in the link command.
As a side effect, since the dtrace objects are now being linked
directly into Xorg, we don't need the SPECIAL_DTRACE_OBJECTS hack to
add them twice.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
The symbols in sdksyms.c cover the entire source tree. In order to make
them resolve when libxorg.la goes away, move the objects from libloader
to Xorg. Unfortunately, this means sdksyms needs to get built again for
the test code.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
When an empty _SOURCES variable is declared, automake will recognize that
only linking is needed.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
This struct was unused and has been effectively removed in
commit 633b81e8ba
Refs: xorg-server-1.10.0-133-g633b81e
Remove the remainder, with an ABI bump to 13.0.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Usage example (tested on a dual-seat PC):
Section "InputClass"
Identifier "keyboard-all"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
MatchLayout "!GeForce|!Matrox"
Driver "evdev"
Option "XkbLayout" "us"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
It disables auto keyboard configuration for layouts "GeForce" and "Matrox".
Note that "" in patterns means "no Layout sections found", e.g.
MatchLayout "GeForce|"
is "in layout GeForce or without explicit layout at all".
Signed-off-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We've broken the ABI with some commit and drivers built against ABI 10
happily segfault now.
(The relevant patch is 51f353d0a0 which
changed the ATOM typedef from unsigned long to uint32_t, thanks to
Cyril Brulebois <kibi@debian.org> for figuring this out)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The user/specs docs now have external references support.
Developers doc are not installed so they do not participate.
However, using a similar makefile shared amongst developers
document reduces maintenance and is forward looking.
Man pages being out of here, reorg developers docs under the same roof.
Drop the obsolete sgml subdir.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only send invalidate events for drawables if some client has requested
some buffers.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Solaris make won't substitute $< in explicit rules, only implicit ones
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Let configure --enable/disable-aiglx control building of AIGLX for all DDXs. Currently
we can't use --enable/disable-aiglx to control if Xwin DDX is built with AIGLX enabled,
as at the moment it's forced off if we aren't building the X.Org DDX DRI or DRI2 loader
Rearrange things a bit, introducing a new automake conditional, AIGLX_DRI_LOADER to
specifically indicate if the X.Org DDX DRI/DRI2 loader convenience library should be
built, and replace the previous X.Org DDX-specific uses of the AIGLX conditional with that
As before, AIGLX_DRI_LOADER is only enabled if --enable-glx, --enable-aiglx and at least one
of --enable-dri or --enable-dri2 are enabled
This allows the general conditional AIGLX to control if AIGLX is built for the XWin DDX as
well
The C #define AIGLX set by AC_DEFINE(AIGLX) seems to be obsolete, I can't find anything
which checks it
Updated for ajax's "glx: Make --disable-dri not disable AIGLX" patch, which allows DRI2
to be enabled independently of DRI1
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When the smart scheduler is enabled, the VT ioctls (particularly
VT_WAITACTIVE) can be interrupted by the smart scheduler's SIGALRMs.
Previously, this caused the server to immediately continue on to
ScreenInit, almost certainly causing a crash or failure because the X
server that owned the VT hadn't finished cleaning up. As of commit
7ee965a300, it causes a FatalError
instead.
Retrying the ioctl as long as it fails with errno == EINTR fixes the
problem and allows server regenerations to trigger VT switches that
actually succeed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
update_dri2_drawable_buffers() doesn't modify out_count, so pass it
by value.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Don't access invalid memory if calloc() fails to allocate the buffers
array.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
As a good practice and for eventual double frees.
The reason of this patch is due the resilience of xf86XVInitAdaptors, where
for any adaptor failure it's able to keep trying registering the following
ones.
I discussed briefly with Pauli and Ville about a bigger refactoring of such
function, doing it in a way to return instantly when a failure happens; after
all that's how mostly of the other driver functions work. Instead, we just
thought that xf86XVInitAdaptors is wise and cool, and eventually other driver
functions should be even following the main idea of resilience.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
When xf86XVFreeAdaptor is called more than once in xf86XVInitAdaptors (it may,
but not often), the conditional being changed in this patch will always take
true path and will keep freeing pAdaptor->pAttributes, thus letting the system
error-prone.
This patch fix such problem checking for a pointer instead the number of
attributes. Such pointer will be deallocated when xf86XVFreeAdaptor is called
first and will not let the code re-run in the following calls. This is a bit
similar how the surroundings code is already doing.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
No functional changes. Spaghetti code for the win! \o/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Nicolas Peninguy <nico@lostgeeks.org>
introduced in 93ca526892.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Nicolas Peninguy <nico@lostgeeks.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
xf86RandR12.c: In function 'xf86RandR12EnterVT':
xf86RandR12.c:1769:5: warning: ISO C90 forbids mixed declarations and code
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Pointer.c: In function 'xf86parsePointerSection':
Pointer.c:192:5: warning: format '%u' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This refers to pWin->winSize in some #if 0 code remove it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
each DDX has its own copy, I've taken the darwin one,
though I'm not sure why it needs the pOldClip piece that nobody
else has and the commit msg is like an "Updates from magic land"
type message.
This removes the main uses of pWin->winSize from the DDXen.
v2: drop old clip like ajax suggests.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Makes reading the log file a lot easier for those that don't magically
recognise the log spew by the individual drivers.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
This reverts commit 1564c82417.
The drivers used the top bits of the usage_hint to store driver
private flags (intel, radeon, nouveau).
With EXA we need to get at this data so if we migrate the pixmap we
can create the correct type of pixmap in the driver, however this
commit truncates the usage_hint into 8-bit class and loses all the
good stuff.
Signed-off-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were two memory leaks in the function: one was the lack of free
for "enabled", the other was the full lack of releasing anything when
configuration was too small. The first issue was fixed by adding the
missing free, the other was addressed by replacing the duplicate
memory releasing sequences with one that is gotoed into.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Signed-off-by: Keith Packard <keithp@keithp.com>
Devices usually enable SIGIO processing in EnableDevice. CheckMotion
initialises the pointer sprite, sends Enter/Leave events, etc. This leaves
us with a small window where events may be processed without the sprite or
pointer position (as seen from the protocol) is valid.
Block signals during this window.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
configScreen used a dynamically allocated buffer for XF86ConfScreenRec
when conf_screen argument was NULL. This pointer was never stored
anywhere, nor was it released, so this patch makes the function use
automatically allocated storage in that situation.
[ajax: minor grammar fix]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Signed-off-by: Erkki Seppälä <erkki.seppala@vincit.fi>
The class field was unused for pixmaps, and we don't have enough classes
to justify a whole uint32 anyway.
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
v2: Slightly more obvious sizing math.
==14882== Invalid write of size 2
==14882== at 0x6750267: VBEGetVBEInfo (vbe.c:400)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
==14882== Address 0x4f32fa8 is 72 bytes inside a block of size 73 alloc'd
==14882== at 0x4A0640D: malloc (vg_replace_malloc.c:236)
==14882== by 0x675024B: VBEGetVBEInfo (vbe.c:398)
==14882== by 0x6142064: ??? (in /usr/lib64/xorg/modules/drivers/vesa_drv.so)
==14882== by 0x471895: InitOutput (xf86Init.c:519)
==14882== by 0x422778: main (main.c:205)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
sdksyms.c is constructed by processing header files with the C
preprocessor. Its contents will vary depending on the precise
configuration options, and so must depend on the config header
files.
We have one header file which is always changed when any config option
is modified called do-not-use-config.h (which may want a different
name at some point), so make sdksyms.c depend on that file.
Also, we don't want to ship this file; it always needs to be
built. So, include it in the nodist_libloader_la_SOURCES list to
prevent it from being added to the tarball.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Since commit b8d9c5ff removed commonOptions, we now
need to append the "Core{Keyboard,Pointer}" options to
the existing list.
Fixes passing options to devices confirured in xorg.conf
on systems where autoaddevices is false.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Non-GNU makes don't deal with the sinclude or -include variants that
allow Makefile stubs to be created and then included during the build.
Instead, create an empty file at the end of configure so that the
regular include statement can be included. This is how automake handles
automatic source dependencies.
In order to trick automake into not processing the include statement, a
variable is used.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>
In OpenBSD removed support PCCONS in 2002 year
http://marc.info/?l=openbsd-cvs&m=102435816424294&w=2
Signed-off-by: Alexandr Shadchin <Alexandr.Shadchin@gmail.com>
Reviewed-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Signed-off-by: Keith Packard <keithp@keithp.com>
Inferring modes from sync ranges is only valid if the monitor says it's
valid. If the monitor says it's valid, then we'll have already added
those modes during EDID block parse. If it doesn't, then we should
believe it.
If there's no EDID for an output, but sync ranges from the config, we'll
still add default modes as normal.
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Same result, but now also triggers on slave keyboards that send pointer
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
The calling for allocate_or_reuse_buffer may fail due to some reason, e.g. out of memory.
If the buffers[] were not initialized to be NULL, the following err_out may try to access an illegal memory, which will cause X crash afterward.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Justin Dou <Justin.Dou@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows set_percent_option in synaptics to work as described,
and should generally enable to check option syntax without log spam.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InitInput simply initialises all input devices now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Did you know that anonymous enums with function scope will not only
override the enum values from global scope, but will be treated as
entirely different types? C's type system just rules.
xf86Crtc.c: In function 'handle_detailed_monrec':
xf86Crtc.c:1555:33: warning: comparison between 'enum det_monrec_source' and 'enum <anonymous>'
xf86Crtc.c:1562:33: warning: comparison between 'enum det_monrec_source' and 'enum <anonymous>'
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
It's broken for devices with BARs above 4G, and the sysfs method should
work everywhere anyway. As a pleasant side effect, this fixes some
warnings:
fbdevhw.c: In function 'fbdev_open_pci':
fbdevhw.c:333:4: warning: cast from pointer to integer of different size
fbdevhw.c:334:4: warning: cast from pointer to integer of different size
fbdevhw.c:336:4: warning: cast from pointer to integer of different size
fbdevhw.c:337:4: warning: cast from pointer to integer of different size
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
helper_exec.c: In function 'pciCfg1in':
helper_exec.c:507:4: warning: passing argument 2 of 'pci_device_cfg_read_u32' from incompatible pointer type
/usr/include/pciaccess.h:153:5: note: expected 'uint32_t *' but argument is of type 'CARD32 *'
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
xf86VidMode.c: In function 'VidModeGetMonitorValue':
xf86VidMode.c:637:19: warning: 'ret.i' may be used uninitialized in this function
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
If none of Xv ports were affected by window tree modifications we don't
want scan the port list. To avoid useless scanning of port list
PostValidateTree hook is only registered when ClipNotify was called for
any port.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
ValidateTree calls first ClipNotify and later might call
WindowExposures. To avoid useless double reput ClipNotify delays reput
to WindowExposures or PostValidateTree.
PostValidatTree checks all ports if there is clip changes. On clip
changes reput is done to move or scale the overlay.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
If window gets exposed but clipboxes doesn't change drivers would avoid
color key fill. This makes XResizeWindo&co to lose colorkey if
background is painted.
To help drivers to avoid filling colorkey for each put server can
provide helper function if there is exposed areas. Server can subtract
exposed areas from filled region.
As a side effect we can avoid useless color key fills if window only
moves in screen without background fills.
v3:
* Change tracking to filled area to account for client initiated clip
changes
* Make overlaid XvPutImage behavior like textured XvPutImage or PutImage
* Make region dynamically allocated only when required.
v4:
* Simplify new driver interface to reduce duplicate code
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
xf86XVFillKeyHelperDrawable can be used to implement
xf86XVFillKeyHelper.
V2:
* Remove RegionTranslate that clobbered parameter region.
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@nokia.com>
