This at least mentions AutoAddGPU and hints at when you might
want to disable it.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This allows different sub-systems within the same application to
request different Xi versions without either getting old behaviour
everywhere or simply failing with a BadValue.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Commit 8f4640bdb9 fixed a bit of a
chicken-and-egg problem by detaching GPU screens when their providers
are destroyed, which happens before CloseScreen is called. However,
this created a new problem: the GPU screen tears down its RandR crtc
objects during CloseScreen and if one of them is active, it tries to
detach the scanout pixmap then. This crashes because
RRCrtcDetachScanoutPixmap tries to get the master screen's screen
pixmap, but crtc->pScreen->current_master is already NULL at that
point.
It doesn't make sense for an unbound GPU screen to still be scanning
out its former master screen's pixmap, so detach them first when the
provider is destroyed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XI 1.x only allows for first + num valuators, so if a device sends data for
valuators 0 and 2+ only (i.e. valuator 1 is missing) we still need to get
the data for that from somewhere.
XI 1.x uses the hack of an unset valuator mask to get the right coordinates,
i.e. we set the value but don't set the mask for it so XI2 events have the
right mask.
For an absolute device in relative mode, this broke in b28a1af55c, the
value was now always 0. This wasn't visible on the cursor, only in an XI 1.x
client. The GIMP e.g. sees jumps to x/0 every few events.
Drop the condition introduced in b28a1af55c, data in valuators is always
absolute, regardless of the mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
grab->type is only non-zero for passive grabs. We're checking an active grab
here, so we need to check if the touch mask is set on the grab.
Test case: grab the device, then start two simultaneous touches. The
grabbing client won't see the second touchpoints because grab->type is 0
and the second touch is not an emulating pointer.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Numerous pieces of debug output cast a pointer to an int and then use a "%08x"
printf format.
Use "%p" format for 64-bit portability.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix a possible crash in winMultiWindowGetClassHint() when an application doesn't
null terminate the WM_CLASS property class name (which is an ICCCM conformance
bug in the application)
(Reported for running the contiki cooja simulator in multiwindow mode, although
it seems that many Java clients may have this problem, see [1])
Based on a patch by Marc Haesen.
v2: Avoid using strnlen() which is missing on MinGW
v3: Align with Xming patch
[1] http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6961123
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Remove obsolete WIN_XEVENTS_SHUTDOWN. This event is never generated.
(I think the idea was to listen for WM_DELETE_WINDOW, but that's not a very
useful thing to do for a hidden window.)
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Check for python at configure time when building XWin with AIGLX, it's used to
generate the wrapper code for native GL functions.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Avoid a null dereference of DIB_pixels if CreateDIBSection() fails in
NetWMToWinIconAlpha()
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Handle WM_MOUSEHWHEEL tilt wheel messages, similarly to WM_MOUSEWHEEL scroll
wheel messages, to generate X button 6 and 7 presses and releases.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Map extra mouse buttons 1 and 2 to X buttons 8 and 9, as conventional, leaving X
buttons 6 and 7 for tilt wheel.
Also add button labels for buttons 6, 7, 8 and 9 and change btn_labels in from a
dynamic allocation to a fixed one of the required size for all the labels we
use.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove unneeded WM_XBUTTON message defines, they have been provided by w32api
for a long time now.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Change winTranslateKey() to return it's result as it's return value, and change
it's uses as well.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Handle left and right ctrl and shift keys independently
Assume that all modifiers are cleared when all keys are released on focus lost,
as internalKeyState doesn't record which modifier key was pressed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Remove an extra '\n' from internal client IOError log messages
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
_NET_WM_STATE is ATOM[] not ATOM, a list of window state hints, so check all of
the atoms, not just the first one
See EWMH specifcation, section "Application Window Properties"
v2: Actually use [] on the returned atom data
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Currently, WM_ENDSESSION just calls GiveUp() to set the DE_TERMINATE flag. But
for the X server to exit cleanly, we also need the X server dispatch loop to be
unblocked so it can notice that DE_TERMINATE has been set and exit, removing
it's lock file and any unix domain socket.
It appears that the system will terminate the process when the last UI thread in
that process returns from processing WM_ENDSESSION for the last top-level
window.
Since WM_ENDSESSION appears to sent by the system via SendMessage()
(synchronously) and the wndproc is called to process it in the message thread
for that window (the X server thread), we can't easily terminate the X server
dispatch loop from inside the WM_ENDSESSION message processing.
So, create a messaging window, a hidden, top-level window, with a separate
thread to catch this message, and process it by calling GiveUp() and then
blocking on a mutex until the X server dispatch loop exits.
Also, notice when this is a shutdown cancel WM_ENDSESSION message and take no
action.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
XQuartz already conditionally renames main() as dix_main() so it can provide
it's own main(). This isn't the ideal way of doing this, as it prevents libdix
built this way from being useful with any other DDX.
So instead, always name that function dix_main(), and also provide a stub main()
which just calls dix_main(), which can be overriden in the DDX.
Add a main() to XWin (XQuartz already has one, of course).
It's no longer neccessary to link XWin and XQuartz with libmain.
v2: Remove unneeded stub main hw/xwin/InitOutput.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The peculiar way we handle coordinates results in relative coordinates on
absolute devices being added to the last value, then that value is mapped to
the screen (taking the device dimensions into account). From that mapped
value we get the final coordinates, both screen and device coordinates.
To avoid uneven scaling on relative coordinates, they are pre-scaled by
screen ratio:resolution:device ratio factor before being mapped. This
ensures that a circle drawn on the device is a circle on the screen.
Previously, we used the ratio to scale x up. Synaptics already does its own
scaling based on the resolution and that is done by scaling y down by the
ratio. So we can remove the code from the driver and get approximately the
same behaviour here.
Minor ABI bump, so we can remove this from synaptics.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Emmanuel Benisty <benisty.e@gmail.com>
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Simplifies code and reduces risk of overflow from converting length
field in X replies from words to bytes.
One call to _XEatData is left in ephyrHostGLXGetStringFromServer where
it's already been checked for overflow, and other values have been
subtracted from it to reduce the size of data remaining to be eaten.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reduces risk of overflow from converting length field in X replies
from words to bytes. (Also seems to be what several calls were
already incorrectly passing to _XEatData.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Xlib already provides a function to eat padding bytes after the
data read, so use it instead of calculating it ourselves.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
clientDriverNameLength is a CARD32 and needs to be bounds checked before
adding one to it to come up with the total size to allocate, to avoid
integer overflow leading to underallocation and writing data from the
network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
busIdStringLength is a CARD32 and needs to be bounds checked before adding
one to it to come up with the total size to allocate, to avoid integer
overflow leading to underallocation and writing data from the network past
the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
reply.length & reply.size are CARD32s and need to be bounds checked before
multiplying or adding to come up with the total size to allocate, to avoid
integer overflow leading to underallocation and writing data from the
network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
numFBConfigs & numAttribs are CARD32s and need to be bounds checked before
multiplying by structure sizes to come up with the total size to allocate,
to avoid integer overflow leading to underallocation and writing data from
the network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
numVisuals & numProps are both CARD32 and need to be bounds checked before
multiplying by structure sizes to come up with the total size to allocate,
to avoid integer overflow leading to underallocation and writing data from
the network past the end of the allocated buffer.
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
A constant deceleration of x simply means (delta * 1/x). We limited that to
values >= 1.0f for obvious reasons, but can also allow values from 0-1.
That means that ConstantDeceleration is actually a ConstantAcceleration, but
hey, if someone needs it...
X.Org Bug 66134 <http://bugs.freedesktop.org/show_bug.cgi?id=66134>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Seats other than seat0 need custom configuration. Provide that with a
default configuration file so we can share it across distros.
This file intentionally does not end in .conf so it won't get picked up by
the server after a normal installation. gdm, or whatever starts up the
servers will have to explicitly specifiy this config file.
This file replaces the one currently written by systemd's multi-seat-x
binary:
http://cgit.freedesktop.org/systemd/systemd/tree/src/login/multi-seat-x.c
CC: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
* __FreeBSD_kernel_version doesn't exist anymore
* The removed check was for FreeBSD versions from before September 2000
which are no longer supported anyway
* Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=66045
Signed-off-by: François Tigeot <ftigeot@wolfpond.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If we are not backing up logfiles, remove the old logfile before trying to write
a new logfile, as otherwise the operation may fail if the previous logfile was
created by a different user.
This change is useful when:
- The DDX doesn't use the logfile backup mechanism (i.e. not Xorg)
- The DDX is run by a non-root user, and then by a different non-root user
- The logfile directory doesn't have the restricted-deletion flag set
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Acked-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Ungrabbing a device during an active touch grab rejects the grab. Ungrabbing
a device during an active pointer grab accepts the grab.
Rejection is not really an option for a pointer-emulated grab, if a client
has a button mask on the window it would get a ButtonPress emulated after
UngrabDevice. That is against the core grab behaviour.
X.Org Bug 66720 <http://bugs.freedesktop.org/show_bug.cgi?id=66720>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
If the -ardelay or -arinterval options have no argument, there's no
point trying to read it.
See
http://www.forallsecure.com/bug-reports/feb3db57fc206d8df22ca53a6907f74973876272/
Reported-by: Alexandre Rebert <alexandre@cmu.edu>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This reverts commit 3209b094a3. After a
long debug session by Paul Berry, it appears that this was the commit
that has been producing sporadic failures in piglit front buffer
rendering tests for the last several years.
GetBuffers may return fresh buffers with invalid contents at a couple
reasonable times:
- When first asked for a non-fake-front buffer.
- When the drawable size is changed, an Invalidate has been sent, and
obviously the app needs to redraw the whole buffer.
- After a glXSwapBuffers(), GL allows the backbuffer to be undefined,
and an Invalidate was sent to tell the GL that it should grab these
appropriate new buffers to avoid stalling.
But with the patch being reverted, GetBuffers would also return fresh
invalid buffers when the drawable serial number changed, which is
approximately "whenever, for any reason". The app is not expecting
invalid buffer contents "whenever", nor is it valid. Because the GL
usually only GetBuffers after an Invalidate is sent, and the new
buffer allocation only happened during a GetBuffers, most apps saw no
problems. But apps that do (fake-)frontbuffer rendering do frequently
ask the server for the front buffer (since we drop the fake front
allocation when we're not doing front buffer rendering), and if the
drawable serial got bumped midway through a draw, the server would
pointlessly ditch the front *and* backbuffer full of important
drawing, resulting in bad rendering.
The patch was originally to fix bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=28365
Specifically:
To reproduce, start with a large-ish display (i.e. 1680x1050 on my
laptop), use the patched glxgears from bug 28252 to add the
-override option. Then run glxgears -override -geometry 640x480
to create a 640x480 window in the top left corner, which will work
fine. Next, run xrandr -s 640x480 and watch the fireworks.
I've tested with an override-redirect glxgears, both with vblank sync
enabled and disabled, both with gnome-shell and no window manager at
all, before and after this patch. The only problem observed was that
before and after the revert, sometimes when alt-tabbing to kill my
gears after completing the test gnome-shell would get confused about
override-redirectness of the glxgears window (according to a log
message) and apparently not bother doing any further compositing.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
Update manifest to target all architectures, not just x86
Also: Write explicit dependencies for Xwin.rc. XWin.exe.manifest and X.ico are
included the resource compiler output, so add a dependency on them to cause it
to be recompiled if they change.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Win32 Windows properties are of pointer type HANDLE, not an integer type, but we
use the Windows property WINDOW_WID_PROP to store the X window XID.
Add appropriate casts to show it doesn't matter that an XID is smaller than a
pointer on 64-bit build.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
winMultiWindowGetTransientFor() accesses the WM_TRANSIENT_FOR property, which is
an X window XID (which we compare with WINDOW_WID_PROP) and not a WindowPtr.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Change winIconIsOverride() to take a HICON parameter, so some unneccessary
casts, which weren't portable to 64-bit Cygwin, can be removed.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix uses of CreateDialogParam() to be more strictly correct, for 64-bit builds
dwInitParam parameter is LPARAM, not int
Return type of DLGPROC is INT_PTR, not WINBOOL
Also: Reporting the value of g_hDlgDepthChange is completely uninteresting, we
are just interested in GetLastError() if it is NULL
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
The deprecated interface cygwin_conv_to_win32_path() doesn't exist in 64-bit
cygwin, but both the ID_ABOUT_CHANGELOG control and the referenced file who's
path we are converting haven't existed for a while, so just remove this unused,
cygwin-specific code.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Fix a 64-bit portability issue with casting HINSTANCE result of ShellExecute()
to an integer: Since HINSTANCE is a pointer type, use INT_PTR rather than int.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This is the fedora quirks file configuring the special handling some devices
need. Rather than keeping this distro-specific add it to the tree so we can
share these quirks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Fixes a build failure on debian's udeb builds.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This shouldn't have been in the patch
Reported-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
