Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since all the inb/outb/etc. use in the X server itself (except for
xf86SlowBcopy) has been replaced by calls to libpciaccess, we no
longer need to pass inline assembly files to replace the gcc inline
assembly from hw/xfree86/common/compiler.h when building Xorg itself.
The .il files are still generated and installed in the SDK for the
benefit of drivers who may use them.
Binary diff of before and after showed that xf86SlowBcopy was the
only function changed across the Xorg binary and all modules built
in the Xserver build, it just calls the outb() function now instead
of having the outb instructions inlined, making it a slightly slower
bcopy.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Requires passing through the __EXTENSIONS__ and _XOPEN_SOURCE defines
in order to expose the msg_control members in struct msghdr.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If a client passes a section of memory via file descriptor and then
subsequently truncates that file, the underlying pages will be freed
and the addresses invalidated. Subsequent accesses to the page will
fail with a SIGBUS error.
Trap that SIGBUS, figure out which segment was causing the error and
then allocate new pages to fill in for that region. Mark the offending
shared segment as invalid and free the resource ID so that the client
will be able to tell when subsequently attempting to use the segment.
Signed-off-by: Keith Packard <keithp@keithp.com>
v2: Use MAP_FIXED to simplify the recovery logic (Mark Kettenis)
v3: Also catch errors in ShmCreateSegment
Conflicts:
include/dix-config.h.in
include/xorg-config.h.in
This includes the MIT-SHM FD passing requests
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Until other operating systems have a libXtrans port for FD passing,
disable this on non-Linux systems.
Note that this define affects how libXtrans gets built into the X
server, which is why it need only define the symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
The GLX section of configura.ac checks the state of DRI2, so it
needs to be after DRI2=auto is resolved.
Also reset libgl requirement to 7.1.0 in non-dri2 case.
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This gets the server to link with xshmfence again, and also ensures
that the miSyncShm code is linked into the server with the reference
from sdksyms.
Signed-off-by: Keith Packard <keithp@keithp.com>
APM support in the Xserver was used to restore the console mode
prior to a power management event. This was to ensure the mode
upon suspend/resume was one that the system firmware or kernel
could deal with.
APM support is now largely obsolete, KMS drivers don't require a
mode restoration anyhow. Therefore it should be possible to disable
this feature.
(small modification by keithp - move test for XF86PM flag after check
for APM, then move XF86PM flag to xorg-config.h.in)
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
ACPI support in the Xserver was used to restore the console mode
prior to a power management event. This was to ensure the mode
upon suspend/resume was one that the system firmware or kernel
could deal with.
The feature depended on acpid to be running. Most of this functionality
is now take over by systemd, KMS drivers don't require a mode restoration
anyhow. Therefore it should be possible to disable this feature under
some circumstances.
Tested-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Provides both a software implementation using timers and driver hooks
to base everything on vblank intervals.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Adds DRM compatible fences using futexes.
Uses FD passing to get pixmaps from DRM applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
94ed0ba1b5 moved backtracing into the DIX, so
this comment is outdated. since no-one noticed and it's easier to just grep
than update file references, remove the comment.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Fix Automake warning: AC_OUTPUT should be used without arguments.
www.gnu.org/software/autoconf/manual/autoconf.html#Configuration-Files
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We now expect to be linked against something that provides the GL API,
instead of manually grubbing about in the DRI driver's dispatch table.
Since the GLX we expose calls GL functions that are meant to be looked
up dynamically, also add a way to thunk through to GetProcAddress.
This includes a refresh of the generated sources, which requires a
correspondingly new Mesa.
The GetProcAddress stubs are at the moment merely enough to make this
link against Mesa 9.2, but should really be provided for everything not
in the OpenGL 1.2 ABI.
v2: Explicitly hide the GetProcAddress stubs so we can't conflict with
libGL symbols; fix leading tab/space issues [anholt]
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Mesa doesn't ship DRI1 drivers as of 8.0, which is about 18 months and
three releases ago. The main reason to have wanted DRI1 AIGLX was to
get a GLX compositor working, but DRI1's (lack of) memory management API
meant that the cost of a GLX compositor was breaking direct GLX apps,
which isn't a great tradeoff.
Of the DRI1 drivers Mesa has dropped, I believe only mga stands to lose
some functionality here, since it and only it has support for
NV_texture_rectangle. Since that's required for every extant GLX
compositor I know of, I conclude that anybody with a savage, say, would
probably not notice AIGLX going away, since they wouldn't be running a
GLX compositor in the first place.
In the future we'd like to use GL in the server in a more natural way,
as just another EGL client, including in the GLX implementation itself.
Since there's no EGL implemented for DRI1 drivers, this would already
doom AIGLX on DRI1 (short of entirely forking the GLX implementation,
which I'm not enthusiastic about).
v2: Remove DRI1 from AIGLX conditionals in configure.ac [anholt]
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Replaces old use of floatMode attribute with new, extended range of
values in __DRI_ATTRIB_RENDER_TYPE. Also adds new conditions, where the
float modes support requires it. Enables support for not only float
configs, but packed float configs as well.
v2 (idr): Whitespace and formatting fixes. Refactor render type
vs. pbuffer checking to a separate function that includes a quote from
the spec. Re-write commit message. Fix compiler warnings:
glxdricommon.c: In function 'glxConvertConfigs':
glxdricommon.c:212:35: warning: pointer targets in passing argument 3 of 'core->getConfigAttrib' differ in signedness [-Wpointer-sign]
glxdricommon.c:212:35: note: expected 'unsigned int *' but argument is of type 'int *'
glxdricommon.c:230:35: warning: pointer targets in passing argument 3 of 'core->getConfigAttrib' differ in signedness [-Wpointer-sign]
glxdricommon.c:230:35: note: expected 'unsigned int *' but argument is of type 'int *'
Signed-off-by: Daniel Czarnowski <daniel.czarnowski@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Commits a1d41e311c, 7d859bd878 & 3ed2c6e112 made extinit.h require
the XF86 Big Font, XRes & ScrnSaver proto headers, but failed to add them
to the SDK_REQUIRED_MODULES so pkg-config would find them for driver builds.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Require new xcb-xf86dri to get fixed GetDrawableInfo.
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Julien Cristau <jcristau@debian.org>
v2: Massive, conflict-filled rebase. I think I resolved everything
right, but this host xv code makes my eyes bleed. Touch-tested XV
after the rebase (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
v2: Dropped the hostx_load_keymap changes, now that that function is
gutted (anholt).
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net> (v1)
Signed-off-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Move pseudoramiX code to a separate top-level directory. Link Xwin and Xquartz
with libPseudoramiX
I'm not sure moving this to a top-level directory is appropriate, but I'm not
sure where else it fits.
Future work: pseudoramiX can probably be consolidated with the rrxinerama code
(which I think provides fake xinerama data when real XINERAMA is disabled and we
only have one screen)
v2: fix distcheck
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Marc Haesen <marha@users.sourceforge.net>
Replace hardcoded SVR4 || linux || CSRG_BASED with an autoconf check and
the _POSIX_SAVED_IDS macro.
Suggested-by: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Check for python at configure time when building XWin with AIGLX, it's used to
generate the wrapper code for native GL functions.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
XQuartz already conditionally renames main() as dix_main() so it can provide
it's own main(). This isn't the ideal way of doing this, as it prevents libdix
built this way from being useful with any other DDX.
So instead, always name that function dix_main(), and also provide a stub main()
which just calls dix_main(), which can be overriden in the DDX.
Add a main() to XWin (XQuartz already has one, of course).
It's no longer neccessary to link XWin and XQuartz with libmain.
v2: Remove unneeded stub main hw/xwin/InitOutput.c
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Simplifies code and reduces risk of overflow from converting length
field in X replies from words to bytes.
One call to _XEatData is left in ephyrHostGLXGetStringFromServer where
it's already been checked for overflow, and other values have been
subtracted from it to reduce the size of data remaining to be eaten.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reduces risk of overflow from converting length field in X replies
from words to bytes. (Also seems to be what several calls were
already incorrectly passing to _XEatData.)
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
If both are missing, input device hotplugging will not work out of the box.
While we still have a DBus-API or the user may want to set AAD off all the
time, the most likely source of this is misconfiguration (i.e. lack of the
udev/hal devel packages).
Message printed last to make it more obvious to the user.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This picks up support for Xi pointer barriers in the protocol.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>