The client could have said anything here, and if what they said doesn't
actually name an atom NameForAtom() will return NULL, and strcmp() will
be unhappy about that.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the default behaviour was changed from clone mode to horizontal
extended layout, a boolean ScrnInfoRec member preferClone was introduced
to choose the old default behaviour. Option "PreferCloneMode" allows
setting this preferClone member.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
All that was left here was updating the FBO's size. However, the FBO
size was always set correctly already through
glamor_set_pixmap_texture() from whoever had attached a new BO to the
pixmap.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Commit aa6717ce2 switched xf86WaitForInput from using select(2) to using
poll(2). Before this change, the timeout was interpreted as being in
microseconds; afterwards it is fed directly to xorg_poll which interprets
it as being in milliseconds. This results in the function potentially
blocking 1000x longer than intended. This commit scales down the timeout
argument before passing it to xorg_poll, being careful to ensure the result
is not rounded down due to integer division.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
./hw/xfree86/common/xf86pciBus.c: In function ‘xf86MatchDriverFromFiles’:
../hw/xfree86/common/xf86pciBus.c:1330:52: warning: ‘snprintf’ output may be
truncated before the last format character [-Wformat-truncation=]
snprintf(path_name, sizeof(path_name), "%s/%s", ^~~~~~~
../hw/xfree86/common/xf86pciBus.c:1330:13: note: ‘snprintf’ output between 2
dirent->d_name is 256, so sprintf("%s/%s") into a 256 buffer gives us:
and 257 bytes into a destination of size 256
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The glamor_egl module that the GLAMOR paths are using is only built if
GLAMOR_HAS_GBM is true, and there's no plan for implementing the
module without GBM. Simplify modesetting's code as a result.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Because we can use a shared lib in dlsym() for the symbol loader test,
but we can't use the executable.
v2: Drop a stray ' ' and rebase on 820a4cbe9f, by anholt
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Whatever problem this is trying to fix, we don't care. Just include the
thing and stop worrying about whether _POSIX_SOURCE is defined.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
gcc -std=c99 does not define the former, and it's a horrible namespace
confusion anyway.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Add options for DRI{1,2,3}
shmfence is required for DRI3
libdrm is required for any DRI{1,2,3}
Consolidate calls to dependency('libdrm')
Set WITH_LIBDRM when building with libdrm
v2:
Initialize libxserver_dri3 to []
Manually flatten libxserver, since meson doesn't (currently)
Use version_compare rather than circumloctions with dependency()
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
v2: Re-commit the patch reverted in
2388f5e583, with Aaron Plattner's
fix squashed in (by anholt).
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v1)
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Eric Anholt <eric@anholt.net>
This reverts commit 112d0d7d01.
It broke Xorg for Adam, Peter, and myself, by failing hard when a
module load failed.
Signed-off-by: Eric Anholt <eric@anholt.net>
I clearly hadn't run ninja test, since fb no longer had any of the fb
symbols in it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
glibc would like to stop declaring major()/minor() macros in
<sys/types.h> because that header gets included absolutely everywhere
and unix device major/minor is perhaps usually not what's expected. Fair
enough. If one includes <sys/sysmacros.h> as well then glibc knows we
meant it and doesn't warn, so do that if it exists.
Signed-off-by: Adam Jackson <ajax@redhat.com>
I converted Xorg when meson 0.40 came out, but fumbled my grep and
forgot that I had instances of the .extract_all_objects() workaround
in dixmods, too.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Without this, assertion failures can make life hard for users and those
trying to help them.
v2:
* Change commit log wording slightly to "can make life hard", since
apparently e.g. logind can alleviate that somewhat.
* Set default handler for SIGABRT in
hw/xfree86/common/xf86Init.c:InstallSignalHandlers() and
hw/xquartz/quartz.c:QuartzInitOutput() (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The number for it was merged to drm_mode.h in kernel 4.7, and the
output_names[] array just requires that we slot in new strings in
order.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The build defines these, so having the defaults is just a way for the
build system's configuration to get out of sync with the code.
v2: Drop #ifndefs around the other two defines.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
parser/scan.c was checking for #ifdef XCONFIGFILE and XCONFIGDIR and
defaulting to "xorg.conf", and "xorg.conf.d", so if you had changed
__XCONFIGFILE__ to anything else, it would have got out of sync.
Settle on the name without gratuitous underscores.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
E.g. because Xinerama is enabled.
Fixes crash on startup and wrong colours in that case.
Bugzilla: https://bugs.freedesktop.org/100293
Bugzilla: https://bugs.freedesktop.org/100294
Fixes: 62f4405257 ("xfree86/modes: Move gamma initialization to
xf86RandR12Init12 v2")
Tested-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Despite all the careful planning of the kernel, a link may become
insufficient to handle the currently-set mode. At this point, the
kernel should mark this particular configuration as being broken
and potentially prune the mode before setting the offending connector's
link-status to BAD and send the userspace a hotplug event. This may
happen right after a modeset or later on.
Upon receiving a hot-plug event, we iterate through the connectors to
re-apply the currently-set mode on all the connectors that have a
link-status property set to BAD. The kernel may be able to get the
link to work by dropping to using a lower link bpp (with the same
display bpp). However, the modeset may fail if the kernel has pruned
the mode, so to make users aware of this problem a warning is outputed
in the logs to warn about having a potentially-black display.
This patch does not modify the current behaviour of always propagating
the events to the randr clients. This allows desktop environments to
re-probe the connectors and select a new resolution based on the new
(currated) mode list if a mode disapeared. This behaviour is expected in
order to pass the Display Port compliance tests.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
DRM_EVENT_CONTEXT_VERSION is the latest context version supported by
whatever version of libdrm is present. modesetting was blindly asserting
it supported whatever version that may be, even if it actually didn't.
With libdrm 2.4.78, setting a higher context version than 2 will attempt
to call the page_flip_handler2 vfunc if it was non-NULL, which being a
random chunk of stack memory, it might well have been.
Set the version as 2, which should be bumped only with the appropriate
version checks.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
No driver is using these, as far as I know.
v2: Tripwire the entity hook arguments to xf86Config*Entity, fix
documentation (Eric Anholt)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than setting up a per-screen private, just conditionally
initialize ScrnInfoRec::DPMSSet based on the config options, and inspect
that to determine whether DPMS is supported.
We also move the "turn the screen back on at CloseScreen" logic into the
DPMS extension's (new) reset hook. This would be a behavior change for
the non-xfree86 servers, if any of them had non-stub DPMS support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The X Server never generates a global config.h, and instead all these
paths are including dix-config.h or xorg-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Multiple calls to xf86EdidMonitorSet (which can be triggered e.g. by
running xrandr) would potentially keep adding the same modes, causing
the Monitor->Modes list to keep growing larger and using up more memory.
Fix this by calling xf86PruneDuplicateModes after adding the modes
returned by xf86DDCGetModes. This makes sure there's only one instance
of each unique mode in the list.
v2:
* Replace semicolon with {} for empty for loop (Emil Velikov)
* Slightly tweak commit log to avoid minor inaccuracy about what
xf86PruneDuplicateModes does
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99521
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Copied from Mesa with no modifications. Gives us Geminilake PCI IDs.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
There's really no reason to pretend to support this, apps hate it, all
we're doing is giving people a way to injure themselves. It doesn't work
anyway with any Radeon, any NVIDIA chip, or any Intel chip since i810.
Rip out all the logic for handling 24bpp pixmaps and framebuffers, and
silently ignore the old options that would ask for it.
The cirrus alpine driver has been updated to default to 16bpp, and both
it and the i810 driver can now use the 32->24 conversion code in shadow
if they want. All other drivers support 32bpp. Configurations that
explicitly request 24bpp in order to fit in VRAM will be broken now
though.
v2: Fix command line options to silently ignore 24bpp rather than fail
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
The linemarkers in the preprocessor output from gcc5 on Cygwin have
canonicalized paths to included files (e.g. xserver/build/../include/misc.h
is canonicalized to xserver/build/include/misc.h). (see gcc svn rev 210264,
which causes the transformation performed by -fcanonical-system-headers to
be applied to all include pathnames)
These canonicalized paths won't match $topdir, so sdksyms doesn't look at
the contents of those headers for sdk exported symbols.
Workaround this by canonicalizing all the paths we consider, using readlink.
v2:
Keep a cache of readlink results so it isn't quite so dreadfully slow.
Reviewed-by: Adam Jackson <ajax@redhat.com>
The code as written would match anything declared extern. _X_EXPORT is
what we really mean here. That's a macro, so check for what it expands
to and skip if not found.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
First, move them to the end of the struct, for marginally better cache
locality for the struct members that actually have meaning; move the
existing slots at the end of the struct up near some others with similar
meanings. Second, only keep four slots each of integer, data pointer,
and function pointer; we've rarely used this escape hatch so this is
still plenty.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
