The call to 'InitButtonClassDeviceStruct' which initializes the pointer
buttons only results in the first three buttons being created due to a
hardcoded '3'. In order to expose all the buttons defined in the
btn_labels array, we subtitute 'NBUTTONS' in its place.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Substitute a few errant tab characters with eight spaces to conform to the
prevailing style.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
On cursor unrealize, the associated pixmap is destroyed, make sure we
clear the pointer from the private resource and check for the value
being non-null when setting or destroying the cursor.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96246
This partially revert commit 984be78
The rountrip in Xwayland's InitInput() is unlikely the culprit for the
crash reported in bug 95337, even though it's triggered from
InitInput().
Startup goes like this:
xwl_screen_init()
xwl_output_create()
wl_display_roundtrip()
InitInput()
wl_display_roundtrip()
ConnectionInfo initialized
What happens in bug 95337 is that some output data is already available
when we reach InitInput()'s wl_display_roundtrip() and therefore we end
up trying to update the ConnectionInfo's data from RR routines before
ConnectionInfo is actually initialized.
Removing the wl_display_roundtrip() from InitInput() will not fix the
issue (although it would make it less lileky to happen), because
xwl_screen_init() also does a wl_display_roundtrip() after creating the
output, so the race that led to bug 95337 remains.
However, re-setting the xwl_screen->expecting_event to 0 again in
InitInput() still doesn't seem right. so this part is not restored
(thus a partial revert).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95337
Can't find any reference of pointer_limbo_window in the code, let's
remove it.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Current Mesa Git master checks that the EGL display actually supports
the API passed to eglBindAPI, which can only succeed after
eglInitialize.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Read and dispatch pending Wayland events to make sure we do not miss a
possible reply from the compositor prior to discard a key repeat.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Key repeat is handled by the X server, but input events need to be
processed and forwarded by the Wayland compositor first.
Make sure the Wayland compositor is actually processing events, to
avoid repeating keys in Xwayland while the Wayland compositor cannot
deal with input events for whatever reason, thus not dispatching key
release events, leading to repeated keys while the user has already
released the key.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=762618
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This creates a function that invalidates the current sprite and forces
a sprite image reload the next time the sprite is checked, moving that
logic out of the xwayland sources and allowing the miPointerRec
structure to be removed from the server API.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If data is received during XWayland startup, it will be read early in
InitInput() before the connection data is initialized, causing a crash.
Remove the wayland rountrips from InitInput() as this is done again in
xwl_screen_init() where it seems more appropriate.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95337
Reviewed-by: Adam Jackson <ajax@redhat.com>
If posix_fallocate or ftruncate is interrupted by signal while working,
we return -1 as fd and the allocation process returns BadAlloc error.
That causes xwayland clients to abort with 'BadAlloc (insufficient
resources for operation)' even when there's a lot of resources
available.
Fix it by trying again when we get EINTR.
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
XvWindowMask is defined as 0x00020000 and cannot fit in the XvAdaptor
type which is defined as an unsigned char, thus causing a compiler
warning:
xwayland-glamor-xv.c: In function ‘xwl_glamor_xv_add_adaptors’:
xwayland-glamor-xv.c:339:16: warning: large integer implicitly
truncated to unsigned type [-Woverflow]
This XvWindowMask value is actually not used for XvAdaptor itself but by
the server in its xf86xv implementation, so we don't even need that mask
in our xwayland-glamor-xv implementation.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Some games (namely openttd) will raise an XError and fail with a
BadValue if their request to XF86VidModeSetViewPort fails.
Support only the default zoom and viewport, fail for everything else.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Some applications (e.g. using lwjgl) try to parse the output of the
xrandr command and get confused with the mode name returned by Xwayland,
because it contains "@[frequency]" (e.g. "1024x640@60.0Hz").
Remove the @[frequency] part of the mode name to match what is found in
usual mode names on regular X servers to please those applications.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94589
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
We had HAVE_POSIX_FALLOCATE checks, but no such macros were ever
defined anywhere. This commit makes it so that this macro is defined if
the posix_fallocate is detected during configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
On output removal, the CRTC that was added in xwl_output_create()
is not removed in xwl_output_destroy() and would cause a segmentation
fault later on in ProcRRGetMonitors():
(EE) Segmentation fault at address 0x100000001
(EE)
(EE) 10: ? (?+0x29) [0x29]
(EE) 9: /usr/bin/Xwayland (_start+0x29) [0x423299]
(EE) 8: /lib64/libc.so.6 (__libc_start_main+0xf0) [0x7fdd80e7f580]
(EE) 7: /usr/bin/Xwayland (dix_main+0x3b3) [0x544ef3]
(EE) 6: /usr/bin/Xwayland (Dispatch+0x31e) [0x54109e]
(EE) 5: /usr/bin/Xwayland (ProcRRGetMonitors+0x9b) [0x4ca18b]
(EE) 4: /usr/bin/Xwayland (RRMonitorMakeList+0x269) [0x4c9ba9]
(EE) 3: /usr/bin/Xwayland (RRMonitorSetFromServer+0x118) [0x4c9198]
(EE) 2: /usr/bin/Xwayland (MakeAtom+0x30) [0x530710]
(EE) 1: /lib64/libc.so.6 (__restore_rt+0x0) [0x7fdd80e93b1f]
(EE) 0: /usr/bin/Xwayland (OsSigHandler+0x29) [0x5792d9]
Remove the output CRTC in xwl_output_destroy() to avoid the crash.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Older games (mostly those based on SDL 1.x) rely on the XVidMode
extension and would refuse to run without.
Add a simple, limited and read-only xvidmode support that reports the
current mode used so that games that rely on xvidmode extension can run
on XWayland.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87806
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Prefix the temporary file names used for allocating pixmaps with
"xwayland-" instead of "weston-". This makes it less confusing while
looking at the file names of the currently open fds of the Xwayland
process.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
216bdbc735 removed the SetRootClip call in the XWayland output-hotplug
handler when running rootless (e.g. as a part of Weston/Mutter), since
the root window has no storage, so generating exposures will result in
writes to invalid memory.
Unfortunately, preventing the segfault also breaks sprite confinement.
SetRootClip updates winSize and borderSize for the root window, which
when combined with RRScreenSizeChanged calling ScreenRestructured,
generates a new sprite-confinment area to update it to the whole screen.
Removing this call results in the window geometry being reported
correctly, but winSize/borderSize never changing from their values at
startup, i.e. out of sync with the root window geometry / screen
information in the connection info / XRandR.
This patch introduces a hybrid mode, where we update winSize and
borderSize for the root window, enabling sprite confinement to work
correctly, but keep the clip emptied so exposures are never generated.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The last cursor frame we commited before the pointer left one of our
surfaces might not have been shown. In that case we'll have a cursor
surface frame callback pending which we need to clear so that we can
continue submitting new cursor frames.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This adds support to Xwayland to try and use OpenGL core
profile for glamor first.
v1.1: use version defines.
v2: let glamor work out core profile itself.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Replace the block/wakeup handler with a NotifyFd callback instead.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When unplugging an output, it's still listed in xrandr and the size
of the root window still includes the removed output.
The RR output should be destroyed when its Wayland counterpart is
destroyed and the screen dimensions must be updated in both the done
and the destroy handlers.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92914
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
In Wayland, a client (in this case XWayland) should set the cursor
surface when it receives pointer focus. Not doing this will leave the
curser at whatever it was previously.
When running on XWayland, the X server will not be the entity that
controls what actual pointer cursor is displayed, and it wont be notified
about the pointer cursor changes done by the Wayland compositor. This
causes X11 clients running via XWayland to end up with incorrect pointer
cursors because the X server believes that, if the cursor was previously
set to the cursor C, if we receive Wayland pointer focus over window W
which also has the pointer cursor C, we do not need to update it. This
will cause us to end up with the wrong cursor if cursor C was not the
same one that was already set by the Wayland compositor.
This patch works around this by, when receiving pointer focus, getting
the private mipointer struct changing the "current sprite" pointer to
an invalid cursor in order to trigger the update path next time a cursor
is displayed by dix.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Otherwise the server may try to draw onto the root window when closing
down, but when running rootless the root window has no storage thus
causing a memory corruption.
Thanks to Adam Jackson <ajax@redhat.com> for helping tracking this down!
Reviewed-by: Adam Jackson <ajax@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93045
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Tested-by: Marek Chalupa <mchqwerty@gmail.com>
check return values of RR.*Create calls
v2. do not bail out if we don't have any output
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
don't leak memory when realizing window fails
v2. take care of all memory allocation and return values,
not just one leak
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
wl_keyboard::enter is the equivalent of FocusIn + KeymapNotify: it
notifies us that the surface/window has now received the focus, and
provides us a set of keys which are currently down.
We should use these keys to update the current state, but not to send
any events to clients.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a pixmap isn't getting exported as a dmabuf, then we don't need to
make an EGLImage/GBM bo for it. This should reduce normal pixmap
allocation overhead, and also lets the driver choose non-scanout
formats which may be much higher performance.
On Raspberry Pi, where scanout isn't usable as a texture source, this
improves x11perf -copypixwin100 from about 4300/sec to 5780/sec under
xcompmgr -a, because we no longer need to upload our x11perf window to
a tiled temporary in order to render it to the screen.
v2: Just use pixmap->usage_hint instead of a new field. Drop the
changes that started storing gbm_bos in the pixmap priv due to
lifetime issues.
v3: Fix a missing gbm_bo_destroy() on the pixmap-from-fd success path.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
One less layering violation (EGL should call glamor, if anything, not
the other way around).
v2: Move glamor.c's DestroyPixmap wrapping up above the
glamor_egl_screen_init() call, since glamor.c's DestroyPixmap
needs to be the bottom of the stack (it calls fb directly and
doesn't wrap). Caught by Michel.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
When we have a single output, just set it to the physical size of that
output. Otherwise try to approximate it calculating a mean m.m. per
dot. Last fallback is to default to 96 DPI.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
When a new output is hot-plugged we need to not only update our internal
screen dimensions, but also the dix screen dimensions, screenInfo
dimensions and the root window dimensions.
https://bugs.freedesktop.org/show_bug.cgi?id=92273
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
While we have keyboard focus, the server's xkb code is already locking
and latching modifiers appropriately while processing keyboard
events.
Since there is no guaranteed order between wl_keyboard key and
modifiers events, if we got the modifiers event with a locked or
latched modifier and then process the key press event for that
modifier we would wrongly unlock/unlatch. To prevent this, we ignore
locked and latched modifiers while any of our surfaces has keyboard
focus.
But we always need to set the xkb group index since this might be
triggered programatically by the wayland compositor at any time.
Reviewed-by: Daniel Stone <daniels@collabora.com>
output.done event can be sent even on some property change, not only
when announcing the output. Therefore we must check if we already have it
otherwise we may corrupt the list by adding it multiple times.
This fixes bug when xwayland looped indefinitely in output.done handler
and that can be reproduced following these steps (under X without
multi-monitor setup):
1) run weston --output-count=2
2) run xterm, move it so that half is on one output
and half on the other
3) close second output, try run weston-terminal
weston sends updated outputs which trigger this bug.
v2. factor out common code into function
move expecting_events into right branch
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
This makes Xwayland correctly handle a monitor getting unplugged.
[Marek]: use xorg_list_for_each_entry_safe
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
snprintf does not allocate memory, so we can never get an out-of-memory
error.
(Also, the error handler would free xwl_output after it was already
registered as an event listener.)
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Marek Chalupa <mchqwerty@gmail.com>
Commit 2172714c changed behavior of capability handling, but it only
solved part of the problem. If Xwayland is launched without a capability
(e.g. no pointer device is connected when Xwayland was spinned up), and
later that capability comes, the device added will not be automatically
initialized. This patch initializes the device when the capability is
reported for the first time, thus avoiding the problem.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=81819
Signed-off-by: Boyan Ding <stu_dby@126.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This is (eventually) called during
InitializeSprite() → *pScreen->SetCursorPosition → miPointerSetCursorPosition
when a device is set to floating. We don't do anything special outselves, but
we need to pass on to the next layer to make sure the device is initialized
properly. Otherwise, pScreen stays NULL and eventually crashes the server when
we try to clean up behind us.
Test case: grab a device → floats it, ungrab again → crash
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
When grabbed, the slave device is floating, i.e. the master device is NULL.
CheckMotion() isn't happy with NULL. Make sure we pass the right device in,
either the master device when the device is attached, or the device itself
when it is floating.
Reported-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
A DeviceIntPtr with touch valuators is also created in order to deliver
the translated touch events. The lifetime of xwl_touch structs is tied
to the wayland ones, finishing in either wl_touch.up() or wl_touch.cancel()
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This struct holds information about each individual, ongoing touchpoint.
A list of these is held by the xwl_seat.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
This was built as a hack for simple Wayland compositors like Weston
which were lazy and didn't want to configure windows server-side when
moved.
Since comboboxes and menus are separate toplevel O-R windows, this hack
breaks input as it needs to be traced normally, not simply sent to the
focused window.
X11 toolkits really do need their windows to be configured correctly
for their O-R windows comboboxes or menus other things, so let's fix
the lazy compositors and remove this.
I have tested this patch with both Weston and Mutter and neither of
them require any changes, and it fixes comboboxes and menus.
If somebody then wants to revert 73698d4, that's fine by me, so we
reduce the amount of API that DDXen have.
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
xwayland windows ignored any key repeating settings
advertised by a compositor
v2. don't hardcode version 4 of seat
use AutoRepeatModeOn/Off
v3. use min(version, 4) when binding seat
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
By the time we get here we've already done CloseDownDevices, so on the
second regeneration you get:
Invalid read of size 4
at 0x43402A: RemoveDevice (devices.c:1125)
by 0x427902: xwl_seat_destroy (xwayland-input.c:568)
by 0x42649C: xwl_close_screen (xwayland.c:116)
by 0x4B7F67: CursorCloseScreen (cursor.c:187)
by 0x536003: AnimCurCloseScreen (animcur.c:106)
by 0x539831: present_close_screen (present_screen.c:64)
by 0x43E486: dix_main (main.c:351)
by 0x30D70206FF: (below main) (libc-start.c:289)
Address 0x980e1a0 is 64 bytes inside a block of size 904
at 0x4A07D6A: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x434158: RemoveDevice (devices.c:1157)
by 0x42F77B: CloseDeviceList (devices.c:1017)
by 0x430246: CloseDownDevices (devices.c:1047)
by 0x43E3EB: dix_main (main.c:333)
by 0x30D70206FF: (below main) (libc-start.c:289)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
By the time we get here we've already been through FreeAllResources,
which has already torn down the RANDR objects, so on the second
regeneration you get:
Invalid read of size 4
at 0x51C6F0: RRCrtcDestroy (rrcrtc.c:659)
by 0x4285F5: xwl_output_destroy (xwayland-output.c:191)
by 0x426464: xwl_close_screen (xwayland.c:112)
by 0x4B7F77: CursorCloseScreen (cursor.c:187)
by 0x536013: AnimCurCloseScreen (animcur.c:106)
by 0x539841: present_close_screen (present_screen.c:64)
by 0x43E496: dix_main (main.c:351)
by 0x30D70206FF: (below main) (libc-start.c:289)
Address 0x4cc6640 is 0 bytes inside a block of size 728 free'd
at 0x4A07D6A: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x51BCCF: RRCrtcDestroyResource (rrcrtc.c:689)
by 0x45CD91: doFreeResource (resource.c:872)
by 0x45DE56: FreeClientResources (resource.c:1138)
by 0x45DF06: FreeAllResources (resource.c:1153)
by 0x43E3BD: dix_main (main.c:321)
by 0x30D70206FF: (below main) (libc-start.c:289)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We need this for doing USB offload scenarios using glamor
and modesetting driver.
unfortunately only gbm in mesa 10.6 has support for the
linear API.
v1.1: fix bad define
v2: update the configure.ac test as per amdgpu. (Michel)
set linear bos to external to avoid cache. (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Xwayland opens anonymous files for its sharing buffers, move these
file descriptors out of the range of the client select mask to avoid
reaching the maximum number of clients prematurely.
https://bugs.freedesktop.org/show_bug.cgi?id=91072
Tested-by: Olivier Fourdan <fourdan@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In some extreme cases with animated cursors at a high frame rate we
could end up filling the wl_display outgoing buffer and end up with
wl_display_flush() failing.
In any case, using the frame callback to throttle ourselves is the
right thing to do.
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Right now if "-auth" isn't passed on the command line, we let
any user on the system connect to the Xwayland server.
That's clearly suboptimal, given Xwayland is generally designed
to be used by one user at a time.
This commit changes the behavior, so only the user who started the
X server can connect clients to it.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xwayland currently allows wide-open access to the X sockets
it listens on, ignoring Xauth access control.
This commit makes sure to enable access control on the sockets,
so one user can't snoop on another user's X-over-wayland
applications.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Fix missing newlines from error string and fix grammar.
Signed-off-by: Robert Ancell <robert.ancell@canonical.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We don't even need to simulate button clicks; it's done automatically.
This also fixes scrolling in Qt5 apps.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Remove these defines as we start to remove support for non-standard
glamor layering as used by the intel driver.
v2: Rebase on the blockhandler change and the Xephyr init failure
change (by anholt), fix stray NO_DRI3 addition to xwayland.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
So that Xwayland gets re-linked each time glamor is modified.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Nothing was using it and if anyone had they would've gotten a warning and
noticed that it doesn't actually work. Drop this, it has been unused for years.
Input ABI 22
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Carlos Olmedo Escobar <carlos.olmedo.e@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
glEGLImageTargetTexture2DOES only set the first level.
Mesa handles this new texture as incomplete and renders a black screen.
We also want to prevent linear filtering.
https://bugs.freedesktop.org/show_bug.cgi?id=81800
Signed-off-by: Markus Wick <markus@selfnet.de>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Xwayland Makefile explicitely set its dependencies on
WAYLAND_LIBS. If the ibrairies are installed in a non-standard
path, WAYLAND_LIBS contains '-L/path/to/the/lib' which will fail
at build time with:
"No rule to make target '-L/path/to/the/lib', needed by 'Xwayland'.
Stop"
Remove that explicit dependency to avoid the problem (LDADD ought
to be enough to get the right libraries linked).
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently, the indexes are off by 4 because of the scroll buttons.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
There were three paths that called eglDestroyImageKHR:
* The front buffer
* The intel driver's flip buffer
* pixmaps under DRI3
This patch unifies the second two by having glamor_destroy_pixmap
always destroy any associaged EGL image. This allows us to stop
storing the back_pixmap pointer in glamor as that was only used to
make sure that buffer was freed at server reset time.
v2: check for valid pixmap_priv before using it in
glamor_egl_destroy_pixmap_image
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Zhigang Gong <zhigang.gong@linux.intel.com>
xwayland.c:661:1: warning: function 'xwl_log_handler' could be declared with
attribute 'noreturn' [-Wmissing-noreturn]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Move drm.xml out of the automake conditional so make dist includes it
even if glamor-egl is disabled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83960
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of sending every little rect. Lets x11perf run to completion,
makes 'while true; do gtkperf -a; done' take longer to crash.
This is effectively a resend of the same logic against the old
xfree86+xwayland branch:
http://lists.x.org/archives/xorg-devel/2013-October/038453.html
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
This implements simple throttling that keeps us to one attach per
frame. There isn't really an active performance benefit, since the
buffers will be redrawn only once per frame anyway, but it does cut down
on the chatty network traffic. Since the Wayland sockets might fill
up as well, the cut down on the volume of data we send out also provides
us with a big stability benefit.
Namely, mutter is a lot more stable running gtkperf, a fairly intensive
X11 application, after this change.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
If something quickly maps and unmaps a window, then we'll immediately
create and destroy the Wayland surface that cooresponds to that
window. If our mouse pointer is over the window when the surface is
created, we'll receive a enter on the window.
Since resource creation and destruction is not synchronous, that
means that the compositor will queue up an event for a resource that's
eventually destroyed. On the client-side, when we receive this message,
we note that the resource isn't allocated, and get a NULL surface in our
enter handler. We immediately try to dereference this, and then crash.
This was caused by running gtkperf while moving the window a lot.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Jasper St. Pierre <jstpierre@mecheye.net>
A few files in the server are including xorg-server.h, which is only
for use by Xorg server drivers. This fixes those errors and then adds
a check to make sure it doesn't happen again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Anytime a capability is first reported, the device is created, but after
that, it is only disabled/enabled.
This is a closer behavior to what Xorg does on VT switch, at the expense
of maybe leaving a dangling "physical" device if a capability goes for good.
Otherwise, any DeviceIntPtr (re)created after server initialization will be
left floating, and bad things happen when the wayland enter event handler
tries to update cursor position based on a floating device.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Started out as an Xorg module to be used from Xorg drivers to let
Xorg run under a wayland server. The idea was to be able to reuse the
2D acceleration from the Xorg driver. Now with glamor being credible,
a better plan is to just make Xwayland its own DDX, similar to Xwin
and Xquartz. This is a much better fit, as much of the code in the
original approach had to hack around Xorg doing Xorg things like take
over the VT, probe input devices and read config files. Another big win
is that Xwayland dosn't need to be setuid root.
The Xwayland support for DRI3, Glamor and render nodes was done by
Axel Davy <axel.davy@ens.fr>, who also did a lot of work on the rebase
to the Xwayland DDX.
Contributions from:
Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Corentin Chary <corentin.chary@gmail.com>
Daniel Stone <daniel@fooishbar.org>
Kristian Høgsberg <krh@bitplanet.net>
Robert Bragg <robert@linux.intel.com>
Scott Moreau <oreaus@gmail.com>
Tiago Vignatti <tiago.vignatti@intel.com>
Giovanni Campagna <gcampagn@redhat.com>
Jonas Ådahl <jadahl@gmail.com>
Ray Strode <rstrode@redhat.com>
Trevor McCort <tjmccort@gmail.com>
Rui Matos <tiagomatos@gmail.com>
Axel Davy <axel.davy@ens.fr>
Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Axel Davy <axel.davy@ens.fr>