Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The internals of XTest are used by Xi and Xkb, and both Xi and Xkb are
always required, so it makes little sense to have XTest place data in
a devPrivate, especially a devPrivate which is only available when the
XTest extension is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make sure all of the private keys used by the test code are
initialized before being used.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Robert Hooker <sarvatt@ubuntu.com>
Keys need to persist through server reset so that the private system
can be cleaned up in dixResetPrivates. In particular, this means that
keys cannot live in objects freed at reset time. This API provides
suitable object lifetime by having the privates code free the key in
the reset path.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Each key now declares which object type it belongs to, this permits
keys for different types to share the same offset within the allocated
privates. As a special case for XSELinux, a key may be allocated as
PRIVATE_XSELINUX which will allow it to continue to be used across the
relevant object types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
For predefined resource types, the offset of the devPrivates field was
already kept in a constant table. The only non-predefined type needing
this treatment was dbeDrawableResType, which is just a magic alias for
RT_PIXMAP.
This patch special-cases looking up RC_DRAWABLE offsets and uses the
table directly for everything else.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This makes the region code changes source compatible with existing
code, although none of them are used within the server source itself.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makes all of the previous macros into inline functions and also
turns all of the direct calls to pixman region code into inline
functions as well.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This prepares the file to be moved from mi to dix. This patch
was done mechanically with the included scripts 'fix-miregion' run over
the entire X server and 'fix-miregion-private' run over
include/regionstr.h and mi/miregion.c.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since reallocating the backing pixmap can fail, we need to try and do
it before any other side effects of reconfiguring the window happen.
This changes the ConfigNotify hook to return status, and moves the
composite window reconfiguration wrappers to ConfigNotify. They all
basically did the same thing, so we can drop the MoveWindow,
ResizeWindow, ChangeBorderWidth wrappers, and allow ConfigNotify to do
all the work. If reallocation fails we fail before we send any
confiureNotify events, or enter the area we can't recover from.
The only place we now enforce 32k limits are in EXA/UXA/fb, so drivers
that don't use this should probably deal with it in their pixmap
allocate if they don't already.
This also breaks ABI, so we need an alternate fix for older servers,
working on the X server makes me realise why I'm a kernel hacker.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Most references to the savedScreenInfo array already had the
corresponding screen pointer handy, which meant they usually looked like
"savedScreenInfo[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Some drivers use DRI protocol but implement their own kernel rendering
manager. For these drivers, libdrm becomes useless. --disable-libdrm
configure parameter can be used to disable libdrm support in dri2.
To provide ABI/API compatibility for libdrm based drivers, libdrm call
is wrapped in ifdef.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Propagate the shape kind all the way to SetShape to avoid performing non-input
operations such as revalidating the tree and generating exposures when only
changing a window's input shape.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Acked-by: Aaron Plattner<aplattner@nvidia.com>
Reviewed-by: Daniel Stone<daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
For absolute input devices (E.G. touchscreens) in multi-head setups,
we need a way to bind the device to an randr output. This adds the
infrastructure to the server to allow us to do so.
positionSprite() scales input coordinates to the dimensions of the shared
(total) screen frame buffer, so to restrict motion to an output we need to
scale/rotate/translate device coordinates to a subset of the frame buffer
before passing them on to positionSprite.
This is done here using a 3x3 transformation matrix, which is applied to
the device coordinates using homogeneous coordinates, E.G.:
[ c0 c1 c2 ] [ x ]
[ c3 c4 c5 ] * [ y ]
[ c6 c7 c8 ] [ 1 ]
Notice: As input devices have varying input ranges, the coordinates are
first scaled to the [0..1] range for generality, and afterwards scaled
back up.
E.G. for a dual head setup (using same resolution) next to each other, you
would want to scale the X coordinates of the touchscreen connected to the
both heads by 50%, and translate (offset) the coordinates of the rightmost
head by 50%, or in matrix form:
left: right:
[ 0.5 0 0 ] [ 0.5 0 0.5 ]
[ 0 1 0 ] [ 0 1 0 ]
[ 0 0 1 ] [ 0 0 0 ]
Which can be done using xinput:
xinput set-prop <left> --type=float "Coordinate Transformation Matrix" \
0.5 0 0 0 1 0 0 0 1
xinput set-prop <right> --type=float "Coordinate Transformation Matrix" \
0.5 0 0.5 0 1 0 0 0 1
Likewise more complication setups involving more heads, rotation or
different resolution can be handled.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No special memory handling is used to give drivers the maximum flexibility
with the data. Drivers should be able to call realloc on the product string
if needed and perform similar operations.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For AtomError, this should fix a clang warning; in the other cases it's
just good documentation.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This eliminates a poorly-named, poorly-documented field from the
ScreenRec, using a previously-unused flag bit in each GC instead.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The structure containing the state of animated cursor was amended within
SpriteInfoRec, removing all previously privates logic to keep such state.
API change: It was removed MAXDEVICES dependency \o/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
XSELinux was the only consumer of these interfaces and it no longer
needs them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Use the values from xproto rather than duplicating the effort
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
The call in CreateGC is particularly questionable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Previously the callers were only setting errorValue on Success, when
it's ignored, and leaving it alone on failure, when it's sent to the
client.
Since SetFontPath takes the ClientPtr, let it set client->errorValue
instead of letting the callers continue to get it wrong.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
C89 guarantees alignment of pointers returned from malloc/calloc/realloc, so
stop fiddling with alignment manually and just pass the arguments to library
functions.
Also convert silent error when negative size is passed into function into
warning in log file.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With Xinerama enabled, event coordinates are relative to Screen 0, so
they can be negative. The new DeviceEvent's coordinates are of type
uint16_t, making screens above and to the left of Screen 0 unusable.
X.Org Bug 24986 <https://bugs.freedesktop.org/show_bug.cgi?id=24986>
Signed-off-by: Chris Humbert <freedesktop@mahadri.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In the process, fixes a memory leak in CloseDevice, and an unchecked
memory allocation in InitializePredictableAccelerationProperties.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Needed as the privates stuff uses the callbacks before they would have
been defined in dix.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The functions exported by the devPrivates code were poorly documented. I tried
to spruce it up a little.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Bizarre. This seems to never be used before. I left the field in ScreenInfo,
with another name. So, stop looking at it.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This should be removed together with 49b93df8.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
The name XkbDDXFakeDeviceButton and XkbDDXFakeDeviceMotion is somewhat
misleading, there's no DDX involved in the game at all anymore.
This removes XkbFakeDeviceMotion and XkbFakeDeviceButton from the API where
it arguably shouldn't have been in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Section 4.6.1 of the XKB spec says that "the initial event always moves the
cursor the distance specified in the action [...]", so skip the
POINTER_ACCELERATE flag for GPE, it would cause double-acceleration.
Potential regression - GPE expects the coordinates to be either relative or
both. XKB in theory allows for x to be relative and y to be absolute (or
vice versa). Let's pretend that scenario has no users.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Those functions are used by TigerVNC libvnc.so module which doesn't
use standard XInput infrastructure but uses same functions like,
for example, XTest devices.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Update our supported DRI2 protocol version as each driver does
DRI2ScreenInit, since depending on available kernel features, each DDX
may support different callbacks and therefore protocol.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Allow the default log location to be configurable (e.g. /var/log),
and use separate logs for each display instance (e.g. XWin.0.log).
Make the type of g_pszLogFile const char*, per os/log.c:LogInit().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Borrowed from i830.h, except for list_for_each_entry().
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Executed from the ConfigureWindow request, right before sending
ConfigureNotify to the clients.
This commit breaks the ScreenRec ABI.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reintroduce a check which used to be there in the old
ProcessKeyboardEvent/ProcessPointerEvent codepath, which avoids us
recording events subject to a grab twice: once when it's first processed
in EnqueueEvent, and then again when it's thawed and being replayed.
This required a tiny amount of code motion to expose syncEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Also remove HAVE_NETLINK_AVC_ACQUIRE_FD tests, because we now
require a version of libselinux that has it.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
RECORD was disabled during the switch to internal events. This patch
modifies the record callback to work with internal events instead of
xEvents. The InternalEvents are converted to core/Xi events as needed.
Since record is a loadable extension, the EventTo* calls must be externed.
Signed-off-by: Chris Dekter <cdekter@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The only DDX currently using hotplugging is the xfree86 one and it looks
like it'll stay that way for a bit. Move the initialization to the DDX,
since Xephyr, Xnest, and friends don't need HAL or udev notifications.
Add CloseInput (counterpart to InitInput) to be able to clean up the config
initialization from the DDX as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.
Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).
i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".
Example configuration:
udev:
ENV{ID_INPUT.tags}="foo,bar"
hal:
<merge key="input.tags" type="string">foo,bar</merge>
xorg.conf:
Section "InputClass"
Identifier "foobar quirks"
MatchTag "foo|foobar"
Option "Foobar" "on"
EndSection
Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Move tokenize out of the parser, make it a dix util function instead.
Splitting a string into multiple substrings is useful by other places, so
let's use it across the line. Future users include config/hal, config/udev
and of course the parser.
Example usage:
char **substrings = xstrtokenize(my_string, "\n");
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Thoses definitions have been included in the kernel but the X server is not updated accordingly.
Without these definitions, the multitouch axes are not correctly labelled.
Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Look for system.Xwinrc in SYSCONFDIR/X11 (usually /etc/X11)
Rename sample system.Xwinrc file not to have a X11R6 path in it's name
Add makefile install rule for system.XWinrc
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Use the configured vendor web address in the About dialog
Update resources file: rework About dialog, use 'MS Shell Dlg 2'
logical font for all dialogs, add ellipsis to exit option in tray
menu as it (may) trigger another dialog.
Get short vendor name from xwin-config.h, like other configuration
data presented in the About dialog box, rather than creating the
PROJECT_NAME define
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The default behavior of the server is to start with an invisible root cursor.
Be such cursor invisible or inexistent (null), in the end it doesn't matter -
for the user. The content on screen will be the same. Besides, there's no
difference, in terms of performance, whether such cursor is invisible or
simply null. The paths that both take inside the server are roughly the same.
Therefore create a null root cursor becomes irrelevant.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XKB really XKBdoes not XKBneed its own XKBdefines for XKBeverything.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since it's typedef'd to XkbConvertCase anyway and the headers are now split
from the client headers, simply get rid of it altogether.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Bonus point - it's easier to understand what's actually being done with the
memory.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Please no extension-specific macros for memory allocation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Main problem is that EventType enumeration members can be different in
module and in server, which obviously causes problems.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add --without-kdrive-{kbd,mouse,evdev} configure options disabling
Linux keyboard driver, Linux mouse drivers (ps2, bus,ms),
and Linux evdev driver.
Build all drivers by default as before.
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This profile is inspired by the accel code removed from the wacom driver.
It ascends from zero to acceleration, maxing out at threshold. This means you
can control the slope using threshold, which wasn't possible in wacom.
For sanity's sake, threshold should grow with acceleration.
Works best with adaptive deceleration, since otherwise it only generates
acceleration above 1, causing seldom pixel skips.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
