xf86Xinput.c relied on xkbsrv.h's definition of True/False which seems odd
at first and weird on second glance.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This avoids possible doing it twice which could result in incorrect
keycodes for alt due to our loss of information about its side.
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
This allows clients to easily check for swap completion status in their
main loop.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
With InputClass support, it makes more sense to cover all
aspects of acceleration in options. Previously, one could only set the
default on the command line.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This file is no longer part of the source code
and must be removed from distribution.
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only detectable on a Cygwin build
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Bus mice aren't used anymore, do not keep dead code around.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Put framebuffer colormap updating code in separate function
for brevity.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Xfbdev, Xephyr and Xfake all use only one framebuffer, so simplify
implementation by removing overlay support.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
memory_base, memory_size, off_screen_base fields in
KdScreenInfo are used only by fake EXA in Xephyr. Move
them into Xephyr, cleanup Xfake and Xfbdev.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Card attrs are unused in all current kdrive servers, so
remove it completely to avoid allocating and passing dummy
values to KdCardInfoAdd.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Add --without-kdrive-{kbd,mouse,evdev} configure options disabling
Linux keyboard driver, Linux mouse drivers (ps2, bus,ms),
and Linux evdev driver.
Build all drivers by default as before.
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
SDL server is gone, no need to keep its .gitignore anymore.
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
ba2d39dd54 introduced warnings:
xf86Mode.c: In function ‘xf86CheckModeForDriver’:
xf86Mode.c:986: warning: passing argument 1 of ‘modeInClockRange’ from incompatible pointer type
xf86Mode.c:253: note: expected ‘ClockRangePtr’ but argument is of type ‘ClockRangesPtr’
xf86Mode.c:1002: warning: passing argument 1 of ‘modeInClockRange’ from incompatible pointer type
xf86Mode.c:253: note: expected ‘ClockRangePtr’ but argument is of type ‘ClockRangesPtr’
Because I foolishly didn't notice that we had types with nearly
identical members named ClockRange and ClockRanges. The latter
contained an extra 'strategy' member at the end, which claimed to be
needed by the vidmode extension. Of course, this was a lie: the only time
we'd use it was in mode validation, for drivers using LOOKUP_CLKDIV2 with
non-programmable clocks. The only driver using LOOKUP_CLKDIV2 is
rendition, which has a programmable clock. The only driver using the
ClockRanges type was smi, which did not use it for its 'strategy' member,
so has been fixed to use ClockRange instead.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xfree itself checks for NULL, and even this is not necessary
as passing NULL to free(3) is safe.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
While the identifier is likely set before the input classes are merged, the
driver may not be. Hence don't check for a driver before we've completed
configuration for this device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
This was always the intention, I only recently realized it wasn't the case
yet...
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Acked-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Refactored code into the parser to allow the freeform boolean types used
in Option entries to be used in other configuration entries. This isn't
as powerful as allowing "No" to precede the option names, but it atleast
gives a common handling of "yes", "no", etc.
A type xf86TriState has been added to support an optional boolean. This
allows the boolean sense of the value to be kept while providing a means
to signal that it is unset.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Any input device with this option will be automatically added to whichever
server layout is selected at startup. This removes the need to reference a
device from the ServerLayout section. The two following configuration are
identical:
CONFIG 1:
Section "ServerLayout"
InputDevice "foo"
EndSection
Section "InputDevice"
Identifier "foo"
...
EndSection
CONFIG 2:
Section "InputDevice"
Identifier "foo"
Option "AutoServerLayout" "on"
...
EndSection
The selection of the server layout affects both explicitly specified
layouts and the implicit layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp at keithp.com>
Add a new command line parameter, -configdir, to specify the config
directory to be used. Rules are the same as -config for root vs. user
privileges.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
These functions should not be used outside of DDXs, so no need to put
them in the ABI.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
I don't think this one has been in use since 2003.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
2003 called, they want their ifdefs back.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>