ScrnInfo->pixmapPrivate only existed in order to catch invalid access to
the framebuffer by making the backing data NULL across the VT switch.
This was causing more confusion in the higher layers during mode setting
without any real benefit, so remove it.
v2: Kill ShadowModifyPixmapHeader() as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Julien Cristau <jcristau@debian.org>
Cc: Andrew Guertin <lists@dolphinling.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Program received signal SIGSEGV, Segmentation fault.
0x080d4a2d in xf86RandR12ScreenSetSize (pScreen=0x8dca3a0, width=800,
height=600, mmWidth=210, mmHeight=157)
at ../../../../hw/xfree86/modes/xf86RandR12.c:731
731 ../../../../hw/xfree86/modes/xf86RandR12.c: No such file or directory.
in ../../../../hw/xfree86/modes/xf86RandR12.c
(gdb) bt full
height=600, mmWidth=210, mmHeight=157)
at ../../../../hw/xfree86/modes/xf86RandR12.c:731
randrp = 0x8dcae68
pScrn = 0x8dbeb28
config = <value optimized out>
pRoot = 0x8e08e30
pScrnPix = 0xb6d12008
ret = 1
c = <value optimized out>
mmWidth=210, mmHeight=157) at ../../randr/rrscreen.c:185
No locals.
at ../../randr/rrscreen.c:307
pWin = 0x8e08e30
pScreen = 0x8dca3a0
i = <value optimized out>
rc = 0
../../randr/randr.c:485
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Julien Cristau <jcristau@debian.org>
Tested-by: Julien Cristau <jcristau@debian.org>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Delete time-traveling multiple personality disorder from the server.
Gaetan notes:
There were a couple of drivers containing an unknown version of the
modes/parser code. This was done in server 1.2 time frame because it
was released without mode code. It was barely or not maintained
afterwards. There are currently no video drivers with a copy of the
modes code.
Most of these ifdefs were introduced in commit
a8d760f567, where Aaron wrote,
This change uses XORG_VERSION_CURRENT < 7.0 to mean "server newer
than 1.2" since XORG_VERSION current went backwards at some point.
Alan explains that:
In Xorg 1.3, when we first released an Xorg server release decoupled
from the katamari release schedule. (1.0 through 1.2 were released
as part of X11R7.0 through 7.2, while 1.3 came out between X11R7.2 &
7.3.)
Commit by Jamey Sharp and Josh Triplett.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
When resetting the server, pScrn->EnterVT must be unwrapped or the
next server generation will end up wrapping the wrapper and causing an
infinite recursion on EnterVT.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Michael Stapelberg <michael+freedesktop@stapelberg.de>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Banked framebuffers are so 1990. As of 7.4 the only drivers remaining
that used this were chips, neomagic, trident, and vesa. vesa only used
it when not using shadowfb, which is broadly undesirable anyway, and no
longer uses it at all as of 2.3.0. neomagic never used it by default,
and support for it is gone in git master. The other two effectively
only ever used it for ISA chips; since ISA support is now gone from
the server, they have been modified to only compile mibank support when
ISA support is available.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When the compat output is missing (I don't think this is actually
possible), or is disabled (and hence has no crtc), we would like to
avoid dereferencing NULL pointers. This patch creates inline functions
to extract the current compat output, crtc or associated RandR crtc
structure, carefully checking for NULL pointers everywhere.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
On Fri, Dec 11, 2009 at 10:19:01AM -0800, Keith Packard wrote:
> On Wed, 9 Dec 2009 11:55:14 +1000, Peter Hutterer <peter.hutterer@who-t.net> wrote:
> > On Tue, Dec 08, 2009 at 05:24:06PM -0800, Aaron Plattner wrote:
> > > On Tue, Dec 08, 2009 at 03:52:27PM -0800, Peter Hutterer wrote:
> > > > Xorg +xinerama crashes immediately due to whacky dependency between Xinerama
> > > > and RandR12. The latter doesn't initialize if Xinerama is enabled, but if
> > > > only one screen is found, Xinerama is disabled again and RandR12 tries to
> > > > access data it never initialized.
>
> I'd sure like to have RandR get enabled when xinerama doesn't; is there
> an easy way of making that happen here? Perhaps having the RandR12 code
> disable Xinerama when only one screen is found? Or some other kludge?
you know the dependency better than I do so any hints are apreciated.
afaict, the screenInfo.numScreens (the check used by Xinerama) isn't
necessarily initialized at this point so we can't use the same check.
The following seems to work though:
From 670b3ebdb7312a6433a8f093d0820785db2aea20 Mon Sep 17 00:00:00 2001
From: Peter Hutterer <peter.hutterer@who-t.net>
Date: Mon, 14 Dec 2009 11:00:58 +1000
Subject: [PATCH] xfree86: if only one screen was found, disable Xinerama (#24627)
Xorg +xinerama crashes immediately due to whacky dependency between Xinerama
and RandR12. The latter doesn't initialize if Xinerama is enabled, but if
only one screen is found, Xinerama is disabled again and RandR12 tries to
access data it never initialized.
Dependency chain is:
- ProcessCommandLine sets noPanoramiXExtension to FALSE
- xf86RandR12Init() is a noop
- PanoramiXExtensionInit sets noPanoramiXExtension to TRUE
- xf86RandR12CreateScreenResources tries to use the devPrivates key it never
initialized.
This hack checks if there's only one screen at the time RandR12 is
initialized. If so, we expect Xinerama to fail anyhow so we disable it
ourselves and proceed as planned.
X.Org Bug 24627 <http://bugs.freedesktop.org/show_bug.cgi?id=24627>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes all rendering and mapping code from xf86DiDGA, leaving
just mode setting and raw input device access. The mapping code didn't
have the offset within /dev/mem for the frame buffer and the pixmap
support assumed that the framebuffer was never reallocated.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Fixes screensaver fadeout effects.
Also make all RandR 1.2 compatibility code for XF86VidMode operate only on the
CRTC associated with the compatibility output, not all CRTCs at once.
Make xf86 RANDR wrap the EnterVT call chain, so it can re-probe the
outputs when a laptop comes back from suspend/unsuspend (actually, any
time that we enter our VT again). The X server should then send RR*
events to clients, so they can cope with a monitor that was unplugged
while the laptop was suspended.
Signed-off-by: Federico Mena Quintero <federico@novell.com>
This way clients querying the gamma value via the VidMode extension at least
get the last value set via the same, rather than always something bogus.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
The reciprocal gamma value was missed in the first copy and this mistake was
propagated to the second one.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
There is a separate panning region check, but that doesn't work under
transformation, so just pre-clip the mouse coordinates when computing the
panning offsets. This leaves the case where panning constants are changing
unresolved.
Signed-off-by: Keith Packard <keithp@keithp.com>
We report the EDID values in RandR, and we let people configure whatever
they like for the screen in xorg.conf. Reporting the EDID values in the core
means applications get inconsistent font sizes in the default configuration.
Signed-off-by: Keith Packard <keithp@keithp.com>
- Example: mode 1280x1024, panned area 1281x1024
panned_area.x2 = 1281
mode.width = 1280
If you substract 1280 from 1281, then that leaves you with one.
Which is the one pixel that you need to move to actually see the last pixel collumn.
Substracting 1 from this will consistently prevent you from seeing the right and bottom edge.
- Add active field to crtc.
- Set gamma (only) whenever a crtc becomes active.
- Check for xf86_config being NULL.
- Increase crtc abi to 3.
- A few other fixes.
- The Gamma values from the monitor section are now used during initial config.
- The old colormap system is disabled when gamma set hook is available.
- Gamma values are now persistent for the lifetime of the xserver.
- This requires no driver changes and should be driver ABI compatible.
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
Instead of using a separate function to notify DIX about transform changes,
add the transform to RRCrtcNotify so that the whole Crtc state changes
atomically.
Add APIs to xf86RandR12 support and randr extension to record whether the
driver supports transforms, report that value in the RRGetCrtcTransform
reply.
Conflicts:
Xext/xprint.c (removed in master)
config/hal.c
dix/main.c
hw/kdrive/ati/ati_cursor.c (removed in master)
hw/kdrive/i810/i810_cursor.c (removed in master)
hw/xprint/ddxInit.c (removed in master)
xkb/ddxLoad.c
Unless we check for vtSema before calling into the CRTC and output callbacks,
we may end up trying to access video memory that no longer exists, leading to a
crash. So if we don't have vtSema, return FALSE to the caller, indicating that
we didn't do anything.
Fixes#14444.
While the ScreenRec's notion of size in millimeters would get updates,
the RANDR 1.1 notion wouldn't, so your screen would appear to be square
and probably at some ludicrous DPI.
In order to report accurate values to users of the RandR property interface,
it's sometimes necessary to ask the driver to update the value (for example
when backlight brightness changes without the server's knowledge, due to hotkey
events or direct sysfs banging).
This patch wires up the core server code with a new xf86CrtcFuncs callback,
get_property, to allow for this.
The new code is available under the RANDR_13_INTERFACE define, which in turn
depends on the RANDR_12_INTERFACE code.
