If config/udev was enabled, this would default to base, which means that
after regen the devices would get the wrong rules, and hilarity would
ensue.
It's probably safe to default to evdev unconditionally on Linux by now.
Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Unable to find any use of the PERL Automake variable.
It was used in hw/xfree86/scanpci around 2005.
Should it ever be needed, use XORG_WITH_PERL macro.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use the new event types so we can pass a valid SBC value to clients.
Fix up the completion calls to use CARD32 instead of CARD64 to match
the new field size.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
automake generates _DEPENDENCIES from _LIBADD, but it strips out variables.
This resulted in not relinking if some components were rebuilt (like
libdix, libos, etc).
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
sdksyms moved from hw/xfree86/loader to hw/xfree86, so the
configure-time create of sdksyms.dep needs to reflect that
change. Otherwise, make might be confused by a missing file and (more
importantly to me) hw/xfree86/loader/sdksyms.dep will be left around
after 'make clean' causing 'make distcheck' to fail.
Passed through from configure.ac via manpages.am
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
This matches a change in xorg-sgml-docs whereby the masterdb will look for
the target dbs into the same location as the generated documents.
The target dbs are now installed alongside the generated documents.
Previously they are installed in $prefix/sgml/X11/dbs alongside masterdb which
has the potential of installing outside the package prefix and cause
distcheck to fail when user does not have write permission in this package.
Requires XORG_CHECK_SGML_DOCTOOLS(1.8) which was released 2011-06-11
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bumping this dependency means some additional macros can be used, like
_X_UNUSED.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Cyril Brulebois <kibi@debian.org>
Implements pointer barriers as specified by version 5 of the XFIXES
protocol. Barriers are axis-aligned, zero-width lines that block pointer
movement for relative input devices. Barriers may block motion in either
the positive or negative direction, or both.
v3:
- Fix off-by-one in version_requests array
- Port to non-glib test harness
- Fix review notes from Søren Sandmann Pedersen, add tests to match
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Relocate the docs under the doc subdir.
Remove redundant xml subdir.
The xmlrules set of makefiles are no longer used.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is the appropriate location for reusable configuration and/or
makefile artifacts as opposed to picking one of the subdirs where
it is used.
It shields them from future doc reorg as every subdir
will refer to the root package which never changes location.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makefile is used to build the 60+ docbooks in xorg.
Dtrace is a user document and should be located under doc subdir.
This user document can now refer to external user/specs docs
or can be referred to by such documnets.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Maintaining either requires full knowledge of both.
It's not obvious one has to check the usage of global variables
in devbook.am when maintaining doxygen target. Or vice-versa.
Being in their respective directory, one less thing to worry about.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The user/specs docs now have external references support.
Developers doc are not installed so they do not participate.
However, using a similar makefile shared amongst developers
document reduces maintenance and is forward looking.
Man pages being out of here, reorg developers docs under the same roof.
Drop the obsolete sgml subdir.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Look for Khronos OpenGL spec files using pkg-config, rather than downloading them
Also add a --with-khronos-spec-dir=PATH configure option so XWin can be directed
where to find these files without using the khronos-spec-files package
XWin with AIGLX requires OpenGL spec files in order to generate wrapper code which:
(1) thunks from the glapi dispatch table which uses the default cdecl calling convention
to native GL functions using the stdcall calling convention.
(2) performs function address lookup for OpenGL 1.2+ functions, which are treated
as extensions and so not directly linkable.
v2: KHRONOS_SPEC_DIR is only valid when XWIN_GLX_WINDOWS is defined. Avoid 'make dist'
seeing invalid dependencies by only including rules using KHRONOS_SPEC_DIR if
XWIN_GLX_WINDOWS is defined
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Let configure --enable/disable-aiglx control building of AIGLX for all DDXs. Currently
we can't use --enable/disable-aiglx to control if Xwin DDX is built with AIGLX enabled,
as at the moment it's forced off if we aren't building the X.Org DDX DRI or DRI2 loader
Rearrange things a bit, introducing a new automake conditional, AIGLX_DRI_LOADER to
specifically indicate if the X.Org DDX DRI/DRI2 loader convenience library should be
built, and replace the previous X.Org DDX-specific uses of the AIGLX conditional with that
As before, AIGLX_DRI_LOADER is only enabled if --enable-glx, --enable-aiglx and at least one
of --enable-dri or --enable-dri2 are enabled
This allows the general conditional AIGLX to control if AIGLX is built for the XWin DDX as
well
The C #define AIGLX set by AC_DEFINE(AIGLX) seems to be obsolete, I can't find anything
which checks it
Updated for ajax's "glx: Make --disable-dri not disable AIGLX" patch, which allows DRI2
to be enabled independently of DRI1
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
For fbAdd{Traps,Triangles}() and fbRasterizeTrapezoid() this is just a
matter of adding the image offsets to the trap offsets.
For fbShapes, the story is more complicated:
The recently added pixman API did not allow offsetting
trapezoids. Instead, it would use x_dst and y_dst in such a way that
the effect was to only offset the source image.
In pixman 0.21.8, this API has changed such that all the traps are
conceptually rendered to an infinitely big image, and the source and
destination coordinates are then aligned with (0, 0) of that
image. This means offsetting dst_x and dst_y will now offset the
entire drawing, which is similar to how other composite functions
work.
This patch then changes fbComposite{Triangles,Traps} such that the
source image is aligned with the shapes, and the destination
coordinates offset according to drawable->{x, y}.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Soren Sandmann <ssp@redhat.com>
The few features from the glib test suite we used can be replaced with
assert and printf. This patch is a simple replacement for these two
g_assert → assert
g_test_message → printf
g_test_init is removed and so is g_test_bug_base. g_test_run replaced with a
simple return 0.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Introduced in 6a5bf15fa9
Reported-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
AX_TLS detects when toolchains support __thread or __declspec(thread),
but existing code assumed __thread.
This also adds a check to configure.ac to error out if TLS is requested
but unsupported.
Found-by: Tinderbox
http://tinderbox.x.org/builds/2011-03-22-0007
Regression-from: 82b1eaa6ca
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Tom Fogal <tfogal@alumni.unh.edu>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
A handful of modules have begun adding unit test programs.
These macros will help providing a consistent interface which will
help package builders and developers to manage the functionality.
XORG_ENABLE_UNIT_TESTS will turn on/off unit testing, regardless
of how it is implemented. The default (yes/no) can be specified by each
module. It can be used by itself if glib or -wrap support is not needed.
XORG_WITH_GLIB will probe the system for glib-2.0. A different version
can be specified in each module. It will consult XORG_ENABLE_UNIT_TESTS
but can be used by itself in contexts other then unit testing.
The default (yes/no) can be specified by each module.
XORG_LD_WRAP will probe the linker for -wrap support. It will consult
XORG_ENABLE_UNIT_TESTS but can be used by itself in contexts
other then unit testing.
configure options:
--enable-unit-tests Enable building unit test cases (default: auto)
--with-glib Use GLib library for unit testing (default: auto)
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
No functional changes.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
The convention is to have the manual pages in a man subdir
which is not under a doc dir. The doc dir contains users docs.
This will move man pages out of the way for upcoming DocBook patches.
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Nobody can have been using this, it's never called from extension init.
XI2 device properties should now be a functional replacement.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Christof Wolf has reported a regression that seems to be caused by
this change, so reverting the change in the 1.9 branch. We'll
investigate a proper fix in master for 1.10.
This reverts commit c89f052104.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
The paths in doxygen.conf assumed that srcdir=builddir and broke
otherwise. Use autoconf to fill in the paths to the srcdir so that the
files can be found when users have a separate build directory (as with
distcheck).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Cyril Brulebois <kibi@debian.org>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Non-GNU makes don't deal with the sinclude or -include variants that
allow Makefile stubs to be created and then included during the build.
Instead, create an empty file at the end of configure so that the
regular include statement can be included. This is how automake handles
automatic source dependencies.
In order to trick automake into not processing the include statement, a
variable is used.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Alan Coopersmith <alan.coopersmith@oracle.com>
