This reverts commit 43d9edd31e.
This commit was introduced in the 1.2 cycle when hotplugging was less than
ideal (i.e. it didn't exist). From the commit message:
Always add a mouse driver instance configured to send core events, unless
a core pointer already exists using either the mouse or void drivers. This
handles the laptop case where the config file only specifies, say,
synaptics, which causes the touchpad to work but not the pointing stick.
We don't double-instantiate the mouse driver to avoid the mouse moving twice
as fast, and we skip this logic when the user asked for a void core pointer
since that probably means they want to run with no pointer at all.
To get this case above, a user would need to disable hotplugging _and_ have a
xorg.conf that only references one device. This is possible, but not a use-case
we should worry about too much now.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Add support for multi-seat-aware input device hotplugging. This
implements the multi-seat scheme explained here:
http://www.freedesktop.org/wiki/Software/systemd/multiseat
This introduces a new X server switch "-seat" which allows configuration
of the seat to enumerate hotplugging devices on. If specified the value
of this parameter will also be exported as root window property
Xorg_Seat.
To properly support input hotplugging devices need to be tagged in udev
according to the seat they are on. Untagged devices are assumed to be on
the default seat "seat0". If no "-seat" parameter is passed only devices
on "seat0" are used. This means that the new scheme is perfectly
compatible with existing setups which have no tagged input devices.
Note that the -seat switch takes a completely generic identifier, and
that it has no effect on non-Linux systems. In fact, on other OSes a
completely different identifier scheme for seats could be used but still
be exposed with the Xorg_Seat and -seat.
I tried to follow the coding style of the surrounding code blocks if
there was any one could follow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Slowly merging the vastly different code-paths.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes, just readability improvements. This also gets rid of
the count variable. Count was just used for resizing the null-terminated
list. Since we're not in a time-critical path here at all we can afford to
loop the list multiple times instead of keeping an extra variable around.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
If we find the core device, move all other device pointers forward right
then and there. The break will jump out of the top loop.
They had a special on braces today, so I added some for readability (and
fixed up tab vs space indentation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
No functional changes.
The options we assign are the ones from the Pointer/Keyboard device so we
might as well use those readable names instead of dev[count-1]->options.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices are core pointers/keyboards by default now anyway, but let's set the
option to some value instead of just NULL.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
It doesn't matter. All devices are core pointer devices by default now
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
LogHdrMessageVerb allows passing a parameterized header to insert in a log
message between MessageType and the formatted message body string.
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Instead of just closing the log when everything is done, put one more
message in stating that we're actually terminating. Users or scripts that
look at the Xorg.log will then know that a) the server has terminated
properly and b) why the server terminated (to some degree, given that most
real-world errors will be caused by AbortServer()).
Acked-by: Gaetan Nadon <memsize@videotron.ca>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Tested-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hotplugged devices, xf86AllocateInput does that for us but the xorg.conf
path is different. Since not all drivers reset the fd during PreInit but may
still call close(pInfo->fd) in all cases, this can terminate the logging
early.
Reproducible: add a wacom driver InputDevice section with no Option Device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
xf86ConfigLayout.inputs contains the information from the xorg.conf
file. Passing this into xf86NewInputDevice means the device will get
cleaned up on exit and the pointers in xf86ConfigLayout.inputs are left
dangling. In the second server generation, this results in a server
crash.
Also, rename pDev to pInfo. pDev is pretty much reserved for DeviceIntPtr
types.
Reproducible: AutoAddDevices off and xorg.conf input sections, trigger
server regeneration.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Devices that succeeded during PreInit and DEVICE_INIT but failed in
DEVICE_ON would be deleted through xf86DeleteInput but not removed from the
list of input devices (and not turned off). The result was a double free on
server shutdown.
Fix this by calling RemoveDevice if EnableDevice fails.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
mieqFini() already does the right thing, but it needs to be called by the
various DDXs and the XTest Extension.
X.Org Bug 38634 <http://bugs.freedesktop.org/show_bug.cgi?id=38634>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Acked-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add four new private XKB actions for debugging:
* PrGrbs: print active grabs to the log file
* Ungrab: ungrab all currently active grabs
* ClsGrb: kill clients with active grabs
* PrWins: dump the current window tree to the log file
To use these, you need to modify your XKB maps, e.g. the following to
have Ctrl+Alt+(F9-F12) mapped to the above:
- compat/xfree86:
interpret XF86LogGrabInfo {
action = Private(type=0x86, data="PrGrbs");
};
interpret XF86Ungrab {
action = Private(type=0x86, data="Ungrab");
}
interpret XF86ClearGrab {
action = Private(type=0x86, data="ClsGrb");
}
interpret XF86LogWindowTree {
action = Private(type=0x86, data="PrWins");
}
- symbols/pc:
key <FK09> { type="CTRL+ALT", [ Return, XF86LogGrabInfo ] };
key <FK10> { type="CTRL+ALT", [ Return, XF86Ungrab ] };
key <FK11> { type="CTRL+ALT", [ Return, XF86ClearGrab ] };
key <FK12> { type="CTRL+ALT", [ Return, XF86LogWindowTree ] };
At the moment, this only works if the grabbing client continues to call
AllowEvents, as the server does no event processing at all when a device
is frozen.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Report to find out all non-UTF-8 files created by
cat extensions |xargs -I XXXX find . -name \*.XXXX |while read FILE ; do
if ( iconv -f utf8 -t ucs2 $FILE >/dev/null 2>/dev/null ) ; then
/bin/true
else
echo $FILE
fi
done >>report
Signed-off-by: Matěj Cepl <mcepl@redhat.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
[Daniel: git am failed for me, so I redid it. The method listed in the
commit message also failed, so I just used file/grep/iconv. The
results are the same though.]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ConfigNotify is set by DRI2ScreenInit, but not restored to
previous state on close. Fix it.
(I'm preparing a patch for xf86-video-nouveau which detects GPU lockup
after dri2 init and it needs to reinitialize dri2)
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Use the new event types so we can pass a valid SBC value to clients.
Fix up the completion calls to use CARD32 instead of CARD64 to match
the new field size.
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Introduced in e3f296d91d, when the ifdef DEBUG
around the whole block was removed, but only two of the three ErrorF
switched to DebugF.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
libxorg.la served to collect all the Xorg convenience libraries into one
massive archive to link into Xorg. This made things easy for symbol
resolution, but it tremendously slowed down the build since each change
caused libxorg.la to be rebuilt. This is an extremely slow process of
extracting all the objects from the sub-libraries and recombining them.
Instead, the archives are linked directly into Xorg. The order of the
libraries had to be tweaked a bit to make symbols resolve correctly with
the lower level code moving later in the link command.
As a side effect, since the dtrace objects are now being linked
directly into Xorg, we don't need the SPECIAL_DTRACE_OBJECTS hack to
add them twice.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
The symbols in sdksyms.c cover the entire source tree. In order to make
them resolve when libxorg.la goes away, move the objects from libloader
to Xorg. Unfortunately, this means sdksyms needs to get built again for
the test code.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
When an empty _SOURCES variable is declared, automake will recognize that
only linking is needed.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Tested-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
This struct was unused and has been effectively removed in
commit 633b81e8ba
Refs: xorg-server-1.10.0-133-g633b81e
Remove the remainder, with an ABI bump to 13.0.
Signed-off-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Usage example (tested on a dual-seat PC):
Section "InputClass"
Identifier "keyboard-all"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
MatchLayout "!GeForce|!Matrox"
Driver "evdev"
Option "XkbLayout" "us"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
It disables auto keyboard configuration for layouts "GeForce" and "Matrox".
Note that "" in patterns means "no Layout sections found", e.g.
MatchLayout "GeForce|"
is "in layout GeForce or without explicit layout at all".
Signed-off-by: Oleh Nykyforchyn <oleh.nyk@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We've broken the ABI with some commit and drivers built against ABI 10
happily segfault now.
(The relevant patch is 51f353d0a0 which
changed the ATOM typedef from unsigned long to uint32_t, thanks to
Cyril Brulebois <kibi@debian.org> for figuring this out)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The user/specs docs now have external references support.
Developers doc are not installed so they do not participate.
However, using a similar makefile shared amongst developers
document reduces maintenance and is forward looking.
Man pages being out of here, reorg developers docs under the same roof.
Drop the obsolete sgml subdir.
Reviewed-by Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
Signed-off-by: Keith Packard <keithp@keithp.com>
Only send invalidate events for drawables if some client has requested
some buffers.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The current approach to event posting required the DDX to request the event
list (allocated by the DIX) and then pass that list into QueuePointerEvent
and friends.
Remove this step and use the DIX event list directly. This means that
QueuePointerEvent is not reentrant but it wasn't before anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
EventListPtr is a relic from pre-1.6, when we had protocol events in the
event queue and thus events of varying size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Don't require every caller to use GPE + mieqEnqueue, provide matching
Queue...Event functions instead.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Solaris make won't substitute $< in explicit rules, only implicit ones
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Gaetan Nadon <memsize@videotron.ca>
Let configure --enable/disable-aiglx control building of AIGLX for all DDXs. Currently
we can't use --enable/disable-aiglx to control if Xwin DDX is built with AIGLX enabled,
as at the moment it's forced off if we aren't building the X.Org DDX DRI or DRI2 loader
Rearrange things a bit, introducing a new automake conditional, AIGLX_DRI_LOADER to
specifically indicate if the X.Org DDX DRI/DRI2 loader convenience library should be
built, and replace the previous X.Org DDX-specific uses of the AIGLX conditional with that
As before, AIGLX_DRI_LOADER is only enabled if --enable-glx, --enable-aiglx and at least one
of --enable-dri or --enable-dri2 are enabled
This allows the general conditional AIGLX to control if AIGLX is built for the XWin DDX as
well
The C #define AIGLX set by AC_DEFINE(AIGLX) seems to be obsolete, I can't find anything
which checks it
Updated for ajax's "glx: Make --disable-dri not disable AIGLX" patch, which allows DRI2
to be enabled independently of DRI1
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
When the smart scheduler is enabled, the VT ioctls (particularly
VT_WAITACTIVE) can be interrupted by the smart scheduler's SIGALRMs.
Previously, this caused the server to immediately continue on to
ScreenInit, almost certainly causing a crash or failure because the X
server that owned the VT hadn't finished cleaning up. As of commit
7ee965a300, it causes a FatalError
instead.
Retrying the ioctl as long as it fails with errno == EINTR fixes the
problem and allows server regenerations to trigger VT switches that
actually succeed.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Cyril Brulebois <kibi@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
GetKeyboardValuatorEvents handles NULL valuator masks already, so the
GetKeyboardEvents wrapper is not needed. Rename GKVE to GKE.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
