Can't use next as a macro argument since we're accessing the .next field
of struct list.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Sometimes the vendor and product names aren't specific enough to target
a USB device, so expose the numeric codes in the ID. A MatchUSBID entry
has been added that supports shell pattern matching when fnmatch(3) is
available. For example:
MatchUSBID "046d:*"
The IDs are stored in lowercase hex separated by a ':' like "lsusb" or
"lspci -n".
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Serial input devices lack properties such as product or vendor name. This
makes matching InputClass sections difficult. Add a MatchPnPID entry to
test against the PnP ID of the device. The entry supports a shell pattern
match on platforms that support fnmatch(3). For example:
MatchPnPID "WACf*"
A match type for non-path pattern matching, match_pattern, has been added.
The difference between this and match_path_pattern is the FNM_PATHNAME
flag in fnmatch(3).
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Allow InputClass sections to match against the running operating system
to narrow the application of rules. An example where this could be used
is to specify that the default input driver on Linux is evdev while it's
mouse/kbd everywhere else.
The operating system name is the same as `uname -s`, and matching is
case-insensitive.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The internals of XTest are used by Xi and Xkb, and both Xi and Xkb are
always required, so it makes little sense to have XTest place data in
a devPrivate, especially a devPrivate which is only available when the
XTest extension is enabled.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Make sure all of the private keys used by the test code are
initialized before being used.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Robert Hooker <sarvatt@ubuntu.com>
Keys need to persist through server reset so that the private system
can be cleaned up in dixResetPrivates. In particular, this means that
keys cannot live in objects freed at reset time. This API provides
suitable object lifetime by having the privates code free the key in
the reset path.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Each key now declares which object type it belongs to, this permits
keys for different types to share the same offset within the allocated
privates. As a special case for XSELinux, a key may be allocated as
PRIVATE_XSELINUX which will allow it to continue to be used across the
relevant object types.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
For predefined resource types, the offset of the devPrivates field was
already kept in a constant table. The only non-predefined type needing
this treatment was dbeDrawableResType, which is just a magic alias for
RT_PIXMAP.
This patch special-cases looking up RC_DRAWABLE offsets and uses the
table directly for everything else.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
This makes the region code changes source compatible with existing
code, although none of them are used within the server source itself.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makes all of the previous macros into inline functions and also
turns all of the direct calls to pixman region code into inline
functions as well.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is a combination of a huge mechanical patch and a few small
fixups required to finish the job. They were reviewed separately, but
because the server does not build without both pieces, I've merged
them together at this time.
The mechanical changes were performed by running the included
'fix-region' script over the whole tree:
$ git ls-files | grep -v '^fix-' | xargs ./fix-region
And then, the white space errors in the resulting patch were fixed
using the provided fix-patch-whitespace script.
$ sh ./fix-patch-whitespace
Thanks to Jamey Sharp for the mighty fine sed-generating sed script.
The hand-done changes involve removing functions from dix/region.c
that duplicate inline functions in include/regionstr.h, along with
their declarations in regionstr.h, mi.h and mispans.h.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This prepares the file to be moved from mi to dix. This patch
was done mechanically with the included scripts 'fix-miregion' run over
the entire X server and 'fix-miregion-private' run over
include/regionstr.h and mi/miregion.c.
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since reallocating the backing pixmap can fail, we need to try and do
it before any other side effects of reconfiguring the window happen.
This changes the ConfigNotify hook to return status, and moves the
composite window reconfiguration wrappers to ConfigNotify. They all
basically did the same thing, so we can drop the MoveWindow,
ResizeWindow, ChangeBorderWidth wrappers, and allow ConfigNotify to do
all the work. If reallocation fails we fail before we send any
confiureNotify events, or enter the area we can't recover from.
The only place we now enforce 32k limits are in EXA/UXA/fb, so drivers
that don't use this should probably deal with it in their pixmap
allocate if they don't already.
This also breaks ABI, so we need an alternate fix for older servers,
working on the X server makes me realise why I'm a kernel hacker.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Many references to the dixScreenOrigins array already had the
corresponding screen pointer handy, which meant they usually looked like
"dixScreenOrigins[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix declared the dixScreenOrigins array, I figure allocating a
screen private for these values is overkill.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Many references to the WindowTable array already had the corresponding
screen pointer handy, which meant they usually looked like
"WindowTable[pScreen->myNum]". Adding a field to ScreenRec instead of
keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
xf86-video-dummy currently uses WindowTable, so it needs to be updated
to reflect this change.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Most references to the savedScreenInfo array already had the
corresponding screen pointer handy, which meant they usually looked like
"savedScreenInfo[pScreen->myNum]". Adding a field to ScreenRec instead
of keeping this information in a parallel array simplifies those
expressions, and eliminates a MAXSCREENS-sized array.
Since dix uses this data, a screen private entry isn't appropriate.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com> (i686 GNU/Linux)
Some drivers use DRI protocol but implement their own kernel rendering
manager. For these drivers, libdrm becomes useless. --disable-libdrm
configure parameter can be used to disable libdrm support in dri2.
To provide ABI/API compatibility for libdrm based drivers, libdrm call
is wrapped in ifdef.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Pauli Nieminen <ext-pauli.nieminen@nokia.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Propagate the shape kind all the way to SetShape to avoid performing non-input
operations such as revalidating the tree and generating exposures when only
changing a window's input shape.
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Acked-by: Aaron Plattner<aplattner@nvidia.com>
Reviewed-by: Daniel Stone<daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
For absolute input devices (E.G. touchscreens) in multi-head setups,
we need a way to bind the device to an randr output. This adds the
infrastructure to the server to allow us to do so.
positionSprite() scales input coordinates to the dimensions of the shared
(total) screen frame buffer, so to restrict motion to an output we need to
scale/rotate/translate device coordinates to a subset of the frame buffer
before passing them on to positionSprite.
This is done here using a 3x3 transformation matrix, which is applied to
the device coordinates using homogeneous coordinates, E.G.:
[ c0 c1 c2 ] [ x ]
[ c3 c4 c5 ] * [ y ]
[ c6 c7 c8 ] [ 1 ]
Notice: As input devices have varying input ranges, the coordinates are
first scaled to the [0..1] range for generality, and afterwards scaled
back up.
E.G. for a dual head setup (using same resolution) next to each other, you
would want to scale the X coordinates of the touchscreen connected to the
both heads by 50%, and translate (offset) the coordinates of the rightmost
head by 50%, or in matrix form:
left: right:
[ 0.5 0 0 ] [ 0.5 0 0.5 ]
[ 0 1 0 ] [ 0 1 0 ]
[ 0 0 1 ] [ 0 0 0 ]
Which can be done using xinput:
xinput set-prop <left> --type=float "Coordinate Transformation Matrix" \
0.5 0 0 0 1 0 0 0 1
xinput set-prop <right> --type=float "Coordinate Transformation Matrix" \
0.5 0 0.5 0 1 0 0 0 1
Likewise more complication setups involving more heads, rotation or
different resolution can be handled.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Peter wants to get a larger patch sequence put together and I didn't
read past the commit message to see the 'don't take this patch
please'.
This reverts commit 531ff40301.
Some input drivers need to implement an internal hotplugging scheme for
dependent devices to provide multiple X devices off one kernel device file.
Such dependent devices can be added with NewInputDeviceRequest() but they are
not removed when the config backend calls DeleteInputDeviceRequest(),
leaving the original device to clean up.
Example of the wacom driver:
config/udev calls NewInputDeviceRequest("stylus")
wacom PreInit calls
NewInputDeviceRequest("eraser")
NewInputDeviceRequest("pad")
NewInputDeviceRequest("cursor")
PreInit finishes.
When the device is removed, the config backend only calls
DeleteInputDeviceRequest for "stylus". The driver needs to call
DeleteInputDeviceRequest for the dependent devices eraser, pad and cursor to
clean up properly.
However, when the server terminates, DeleteInputDeviceRequest is called for
all devices - the driver must not remove the dependent devices to avoid
double-frees. There is no method for the driver to detect why a device is
being removed, leading to elaborate guesswork and some amount of wishful
thinking.
Though the input driver's UnInit already supports flags, they are unused.
This patch uses the flags to supply information where the
DeleteInputDeviceRequest request originates from, allowing a driver to
selectively call DeleteInputDeviceRequest when necessary.
Also bumps XINPUT ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
No special memory handling is used to give drivers the maximum flexibility
with the data. Drivers should be able to call realloc on the product string
if needed and perform similar operations.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
For AtomError, this should fix a clang warning; in the other cases it's
just good documentation.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This eliminates a poorly-named, poorly-documented field from the
ScreenRec, using a previously-unused flag bit in each GC instead.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The structure containing the state of animated cursor was amended within
SpriteInfoRec, removing all previously privates logic to keep such state.
API change: It was removed MAXDEVICES dependency \o/
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
XSELinux was the only consumer of these interfaces and it no longer
needs them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Use the values from xproto rather than duplicating the effort
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
The call in CreateGC is particularly questionable.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This doesn't change any behavior, but it isn't clear whether NullClient
is correct in all cases. As ajax says,
> For most of these changes, I think it's correct to use NullClient,
> since they are server-initiated changes and should not fail for (eg)
> xace reasons. ... At any rate, you're certainly not changing any
> semantics by leaving them all as NullClient, so this patch can't be
> more wrong than before.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Previously the callers were only setting errorValue on Success, when
it's ignored, and leaving it alone on failure, when it's sent to the
client.
Since SetFontPath takes the ClientPtr, let it set client->errorValue
instead of letting the callers continue to get it wrong.
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
C89 guarantees alignment of pointers returned from malloc/calloc/realloc, so
stop fiddling with alignment manually and just pass the arguments to library
functions.
Also convert silent error when negative size is passed into function into
warning in log file.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
With Xinerama enabled, event coordinates are relative to Screen 0, so
they can be negative. The new DeviceEvent's coordinates are of type
uint16_t, making screens above and to the left of Screen 0 unusable.
X.Org Bug 24986 <https://bugs.freedesktop.org/show_bug.cgi?id=24986>
Signed-off-by: Chris Humbert <freedesktop@mahadri.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
In the process, fixes a memory leak in CloseDevice, and an unchecked
memory allocation in InitializePredictableAccelerationProperties.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Needed as the privates stuff uses the callbacks before they would have
been defined in dix.h
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
The functions exported by the devPrivates code were poorly documented. I tried
to spruce it up a little.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Bizarre. This seems to never be used before. I left the field in ScreenInfo,
with another name. So, stop looking at it.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
This should be removed together with 49b93df8.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
The rationale behind is because no sane application will use this when we have
modern APIs such DRI2. Besides, as a fact, xfree86 server has already
deprecated this extension in 1998:
http://www.xfree86.org/3.3.6/isc7.html
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch was created with:
git ls-files '*.[ch]' | while read f; do unifdef -B -DRENDER -o $f $f; done
Signed-off-by: Keith Packard <keithp@keithp.com>
The name XkbDDXFakeDeviceButton and XkbDDXFakeDeviceMotion is somewhat
misleading, there's no DDX involved in the game at all anymore.
This removes XkbFakeDeviceMotion and XkbFakeDeviceButton from the API where
it arguably shouldn't have been in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Section 4.6.1 of the XKB spec says that "the initial event always moves the
cursor the distance specified in the action [...]", so skip the
POINTER_ACCELERATE flag for GPE, it would cause double-acceleration.
Potential regression - GPE expects the coordinates to be either relative or
both. XKB in theory allows for x to be relative and y to be absolute (or
vice versa). Let's pretend that scenario has no users.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Those functions are used by TigerVNC libvnc.so module which doesn't
use standard XInput infrastructure but uses same functions like,
for example, XTest devices.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Update our supported DRI2 protocol version as each driver does
DRI2ScreenInit, since depending on available kernel features, each DDX
may support different callbacks and therefore protocol.
Reviewed-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Allow the default log location to be configurable (e.g. /var/log),
and use separate logs for each display instance (e.g. XWin.0.log).
Make the type of g_pszLogFile const char*, per os/log.c:LogInit().
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Borrowed from i830.h, except for list_for_each_entry().
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Executed from the ConfigureWindow request, right before sending
ConfigureNotify to the clients.
This commit breaks the ScreenRec ABI.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reintroduce a check which used to be there in the old
ProcessKeyboardEvent/ProcessPointerEvent codepath, which avoids us
recording events subject to a grab twice: once when it's first processed
in EnqueueEvent, and then again when it's thawed and being replayed.
This required a tiny amount of code motion to expose syncEvents.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Also remove HAVE_NETLINK_AVC_ACQUIRE_FD tests, because we now
require a version of libselinux that has it.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Reviewed-by: Keith Packard <keithp@keithp.com>
RECORD was disabled during the switch to internal events. This patch
modifies the record callback to work with internal events instead of
xEvents. The InternalEvents are converted to core/Xi events as needed.
Since record is a loadable extension, the EventTo* calls must be externed.
Signed-off-by: Chris Dekter <cdekter@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The only DDX currently using hotplugging is the xfree86 one and it looks
like it'll stay that way for a bit. Move the initialization to the DDX,
since Xephyr, Xnest, and friends don't need HAL or udev notifications.
Add CloseInput (counterpart to InitInput) to be able to clean up the config
initialization from the DDX as well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Tags may be a list of comma-separated strings that match against a MatchTag
InputClass section. If any of the tags specified for a device match against
the MatchTag of the section, this match is evaluated true and passed on to
the next match condition.
Tags are specified as "input.tags" (hal) or "ID_INPUT.tags" (udev), the
value of the tags is case-sensitive and require an exact match (not a
substring match).
i.e. "quirk" will not match "QUIRK", "need_quirk" or "quirk_needed".
Example configuration:
udev:
ENV{ID_INPUT.tags}="foo,bar"
hal:
<merge key="input.tags" type="string">foo,bar</merge>
xorg.conf:
Section "InputClass"
Identifier "foobar quirks"
MatchTag "foo|foobar"
Option "Foobar" "on"
EndSection
Where the xorg.conf section matches against any device with the tag "foo"
or tag "foobar" set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Move tokenize out of the parser, make it a dix util function instead.
Splitting a string into multiple substrings is useful by other places, so
let's use it across the line. Future users include config/hal, config/udev
and of course the parser.
Example usage:
char **substrings = xstrtokenize(my_string, "\n");
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Thoses definitions have been included in the kernel but the X server is not updated accordingly.
Without these definitions, the multitouch axes are not correctly labelled.
Signed-off-by: Benjamin Tissoires <tissoire@cena.fr>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Look for system.Xwinrc in SYSCONFDIR/X11 (usually /etc/X11)
Rename sample system.Xwinrc file not to have a X11R6 path in it's name
Add makefile install rule for system.XWinrc
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Use the configured vendor web address in the About dialog
Update resources file: rework About dialog, use 'MS Shell Dlg 2'
logical font for all dialogs, add ellipsis to exit option in tray
menu as it (may) trigger another dialog.
Get short vendor name from xwin-config.h, like other configuration
data presented in the About dialog box, rather than creating the
PROJECT_NAME define
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
The default behavior of the server is to start with an invisible root cursor.
Be such cursor invisible or inexistent (null), in the end it doesn't matter -
for the user. The content on screen will be the same. Besides, there's no
difference, in terms of performance, whether such cursor is invisible or
simply null. The paths that both take inside the server are roughly the same.
Therefore create a null root cursor becomes irrelevant.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
XKB really XKBdoes not XKBneed its own XKBdefines for XKBeverything.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Since it's typedef'd to XkbConvertCase anyway and the headers are now split
from the client headers, simply get rid of it altogether.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Bonus point - it's easier to understand what's actually being done with the
memory.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Fernando Carrijo <fcarrijo@yahoo.com.br>
Signed-off-by: Keith Packard <keithp@keithp.com>
Please no extension-specific macros for memory allocation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Main problem is that EventType enumeration members can be different in
module and in server, which obviously causes problems.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add --without-kdrive-{kbd,mouse,evdev} configure options disabling
Linux keyboard driver, Linux mouse drivers (ps2, bus,ms),
and Linux evdev driver.
Build all drivers by default as before.
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
This profile is inspired by the accel code removed from the wacom driver.
It ascends from zero to acceleration, maxing out at threshold. This means you
can control the slope using threshold, which wasn't possible in wacom.
For sanity's sake, threshold should grow with acceleration.
Works best with adaptive deceleration, since otherwise it only generates
acceleration above 1, causing seldom pixel skips.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
InitValuatorClassDeviceStruct always initializes with the default profile.
The default profile allocs data and adds a few properties which become
obsolete if the profile is changed lateron by the driver.
The property handlers are stored in the device's devPrivates and cleaned up.
Ideally, the property handler ID's could be stored somewhere more obvious,
but that seems to require breaking the ABI.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Simon Thum <simon.thum@gmx.de>
Xvesa was gone in commit 6d21fbf0 and this should be there as well.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Using common defaults will reduce errors and maintenance.
Only the very small or inexistent custom section need periodic maintenance
when the structure of the component changes. Do not edit defaults.
Reviewed-By: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
libSystem on darwin can handle SHA1 computation without needing to pull in
OpenSSL. See CC_crypto(3)
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
On Sun, Nov 01, 2009 at 02:54:13PM -0800, Keith Packard wrote:
> Excerpts from Matthieu Herrb's message of Sun Nov 01 09:34:35 -0800 2009:
>
> > +AC_CHECK_FUNCS([SHA1Init], [HAVE_LIBC_SHA1=yes])
>
> I'd suggest AC_CHECK_FUNC instead; as far as I can tell, AC_CHECK_FUNCS
> will also define HAVE_SHA1INIT. Also, can you use HAVE_LIBC_SHA1
> consistently rather than having two separate names (HAVE_LIBC_SHA1 and
> HAVE_SHA1_IN_LIBC)? Yes, I know one is a preprocessor symbol and the
> other is a cpp shell variable, but I think that will work anyway.
>
New version taking you comments into account.
From: Matthieu Herrb <matthieu.herrb@laas.fr>
Date: Sun, 1 Nov 2009 18:19:27 +0100
Subject: [PATCH] Add a probe for SHA1 functions in libc in *BSD.
The interface is the same as the one in libmd.
Signed-off-by: Keith Packard <keithp@keithp.com>
There are small systems which don't need OpenSSL or gcrypt.
Add libsha1 (http://github.com/dottedmag/libsha1) as an alternative
small SHA1 implementation.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This function was moved verbatim into libXfont-1.4, and it is not used
by the server or any drivers. Exporting it in both places leads to
multiple definition linking errors on Cygwin, where we need to use a
static libXfont due to poor weak-symbol handling.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
XWin uses ddxBeforeReset, which is called in DIX. Other DDXs need to
define these in order to avoid an undefined symbol error at link time
when building alongside XWin. Xnest and Xvfb already provide empty stubs;
this does the same for Xdmx and the platform-neutral KDrive servers.
Also add a prototype to avoid a warning in all DDXs.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
The previous code was copied and in both cases incorrectly fixed
up the colormaps after resizing the visuals, this patch consolidates
the visual resize + colormaps fixups in one place. This version
also consolidates the vid allocation for the DepthPtr inside the
function.
I'm not 100% sure colormap.[ch] is the correct place for this but
visuals are mostly created in fb and I know thats not the place to
be resizing them.
Fixes fd.o bug #19470.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
include/protocol-versions.h specifies each extension version as supported by
the server and sent back on the wire to the client.
This fixes up several issues with the server potentially reporting a higher
version of the protocol if recompiled against a newer version of the
protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: Julien Cristau <jcristau@debian.org>
Now that all event queues hold internal events only, they never need
to be resized. Resizing them led to memory corruption as they would
get sized for an appropriate xEvent, not an internal event.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Boolean option to enable/disable SIGIO handlers is set by the first
of these found:
- UseSIGIO option is set in xorg.conf ServerFlags
- Default set at build time by ./configure --enable-use-sigio-by-default
- Platform default value: Solaris = no, all others = yes
This matches the current settings on all platforms except Solaris.
This reverts Solaris (for now) to the settings used in Xorg 1.6, before
SIGIO support for Solaris was added, due to some system level bugs that
won't be resolved in time for Xorg 1.7 release, but allows us to enable
when those are resolved (or when we need to test if they're resolved).
See http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6879897
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For core and XI1 events, store the key_repeat flag in the sequence number
until TryClientEvents. The sequenceNumber is unset until TryClientEvents.
[Also thrown in, some random indentation changes. Thanks]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Bits above XI2LASTEVENT are invalid and cause in BadValues. These checks
must be performed anywhere where a mask_len parameter is given.
This patch also adds the missing checks to grab masks.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This adds support for using the libpciaccess interface for
vga arbitration support on top of a kernel which supports it.
Currently patches are queued for kernel 2.6.32 in jbarnes
pci tree, and shipping in Fedora kernel.
Co-authors:
Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch corrects a misnaming of XTest-related functions.
The extension itself announces itself as XTEST. Xtst is the library name
itself, but all library functions are prefixed by XTest. Same with the
naming in the server.
- Rename all *Xtst* functions to *XTest* for consistency with the library
and in-server API.
- Rename the "Xtst device" property to "XTEST device" for consistency with
the extension naming.
- Rename the device naming to "<master device name> XTEST device". The
default xtest devices become "Virtual core XTEST pointer" and "Virtual
core XTEST keyboard".
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The smart scheduler is designed to minimize scheduler overhead by
increasing the interval between WaitForSomething calls when a single
client is running. However, the software rotation code depends on
its BlockHandler being invoked for screen updates; the long delays
caused by the smart scheduler optimizations means that screen updates
can be delayed a long time as well.
The change is simple -- prevent the smart scheduler from increasing
the scheduling interval while any screen is using software rotation.
Signed-off-by: Keith Packard <keithp@keithp.com>
The extern declaration in xichangehierarchy.c was broken anyway.
This fixes a crash on creating a new master device.
Reported-by: Maxim Levitsky
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
DCEs are now processed when sent throught the master device, not when sent
through the slave device. This includes a removal of some un-used (or partly
used) fields in the DCE itself to something more self-explanatory.
TODO: if a device has events queued and its attachment is changed, the DCE
is silently dropped now. Instead, it should be generated as soon as the
first event after the attachment is sent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
And shuffle them around so that the part used by drivers is up the top and
commented.
Also, woo, the sdksyms script doesn't like declarations with return type and
function name on the same line...
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If you want to run a pre-1999 kernel, you'll need a pre-2009 X server
[Some pre-Solaris 8 VT support is left by this patch to allow reuse by
the new Solaris VT support that follows in the next patch.]
Signed-off-by: Aaron Zang <Aaron.Zang@Sun.COM>
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Use enum EventType instead of ints. This requires a load of default
cases in various switch statements to silence compiler warnings.
Reported-by: Aaron Plattner
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
* Makefile.am: Include the test/ subdirectory in the dist tarball.
* include/Makefile.am: Move events.h to sdk_HEADERS and eventconvert.h to
EXTRA_DIST so they're included in the tarball. events.h shouldn't be
included in the SDK either, but for now it's needed by input.h.
This patch adds the following three functions:
bits_to_bytes(bits) - the number of bytes needed to hold 'bits'
bytes_to_int32(bytes) - the number of 4-byte units to hold 'bytes'
pad_to_int32(bytes) - the closest multiple of 4 equal to or larger than
'bytes'.
All three operations are common in protocol processing and currently the
server has ((foo + 7)/8 + 3)/4 operations all over the place. A common set
of functions reduce the error rate of these (albeit simple) calculations and
improve readability of the code.
The functions do not check for overflow.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reverts the following four patches:
feb757f384 "XKB: Sanitise vmods for redirected keys"
b5f49382fe "XKB: Sanitise ctrls action"
1bd7fd195d "XKB: Sanitise pointer actions"
61c508fa78 "XKB: Sanitise vmods in actions"
Strictly speaking, the structs used in the server are not part of the client
ABI. Practically, they are as we copy from the wire straight into the
structs. Changing the struct sizes breaks various wire/server conversions.
Even when the structs have the same size, some internal magic causes
conversions to fail. Visible by diffing the output files of:
setxkbmap -layout de; xkbcomp -xkb :0 busted.xkb
setxkbmap -layout de -print | xkbcomp -xkb - correct.xkb
Interestingly enough, busted.xkb is the working one although the output is
incorrect. Revert the four offending patches until the exact cause of this
breakage can be determined.
This patch restores functionality to Level3 modifiers.
X.Org Bug 19602 <http://bugs.freedesktop.org/show_bug.cgi?id=19602>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The number of input devices is MAXDEVICES, not MAX_DEVICES (f781a752e6)
Two comments updated to refer to MAXDEVICES.
MAX_FUNCS in sigio.c was set to 16 if MAX_DEVICES was undefined. If more
than 15 physical input devices were present, this could result in a
failure to install the SIGIO handler for any device above 15.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Xtst devices get this property assigned automatically so they can be
detected easily by a client.
The property is read-only.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Rather than storing a simple boolean in the devPrivate for XTest devices,
store the actual master device's id (since it is constant for the life of
the device anyway).
Callers should use GetXtstDevice now instead of digging around in the
devPrivates themselves.
This patch allows for a cleanup in the creation of new master devices since
GetMaster and GetXtstDevice spare the need for loops, IsPointer checks and
similar.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
The callers should need to use the dev privates key to look up xtest
devices.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Close <Benjamin.Close@clearchain.com>
This makes the ptr accel api actually sensible from a driver
perspective, since it avoids superfluous device lookups.
Also, makes independent accel contexts possible.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will be used for follow-up checks after a client has written something,
for security modules that enforce a set of valid values a client can set.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Presumably, some intelligent, XI2-aware management app will be calling
XISetClientPointer on behalf of other clients; this check makes sure
the target client has permission on the device.
Requires changing the prototype to return status code instead of Bool.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Master devices provide the union of all attached slave devices' buttons,
i.e. the number of buttons on the master device is always the number of
buttons of the slave device with the highest number of buttons. When slaves
are attached or detached, the master device adjusts the button number to
reflect the new buttons.
On a slave switch, this slave's button labels are copied into the master (up
to slave->num_buttons). The remaining button labels (if any) stay as they
are. Thus, if any of the higher buttons is still pressed, it reflects the
label of the last pressed device that provided this button.
If two devices press the same button and it is differently labelled the last
pressed one will be reflected in the master device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
inputstr includes XI2proto.h for the sole purpose of XI_LASTEVENT.
However, using XI_LASTEVENT in the server is prone to errors, if the server
is recompiled against a newer version of the protocol it would bump this
variable and associates bits, including potential ABI.
This patch defines an XI2LASTEVENT for use in the server and removes the
XI2proto.h require. XI2LASTEVENT is the current value of XI_LASTEVENT.
This patch is required by components that require access to inputInfo
(currently xf86-video-geode and xf86-video-cirrus) but should not have a
require for the XI2 protocol.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This stops inputstr.h being needed to be included by output drivers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These grabs are suported through two fake devices inputInfo.all_devices and
inputInfo.all_master_devices. These devices are not part of the device list
and are only initialised for their device id, nothing else.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If a passive enter or focus in grab activates, send additional enter or
focus events with mode XIPassiveGrabNotify to the grabbing client.
Likewise, if the grab deactivates, send additional leave or focus out
events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Enter grabs are checked for in CheckMotion(), each time the sprite window
changes the current grab is deactivated (if applicable) and the new grab is
activated (if applicable). Exception - if the grab is on a parent window of
the current window since we keep the grab across descendants.
Since CheckMotion() may change the grab status of a device, we mustn't get
"dev->deviceGrab.grab" in ProcessOtherEvents until after CheckMotion().
FocusIn grabs are checked in much the same manner.
The event delivery for grabs replaces the NotifyNormal on window change with
a NotifyGrab on window change. Note that this happens before the grab
activates, so the EnterNotify(NotifyGrab) is still delivered to the window,
not to the grabbing client. This is in line with the core protocol semantics
for NotifyGrab events.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Copying all classes into the master device has drawbacks for hybrid devices
(devices that are both mice and keyboards). If such a device posts an event,
it's key classes are moved into the VCP. The key event itself is unaffected
by keyboard grabs and the like.
Partial class copying copies depending on the event and copies the classes
into the right master device (i.e. the VCK for key events, the VCP for
pointer events).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For hybrid devices (keys + buttons/axes) the attached master device is
generally the wrong one. One shouldn't post a button event through a
keyboard and vice versa.
GetMaster(dev) returns the right master device for the given type needed.
This may be the MD paired with this device's MD.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
ChangeDeviceId would actually overwrite the flags field if deviceid wasn't
present. Aside from the event of course not telling which device generated
it in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
There's no need for internal events to be a struct with a single nested
union, we might as well make the union itself the InternalEvent.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
isMaster is not enough as long as we differ between master pointers and
keyboard. With flexible device classes, the usual checks for whether a
master device is a pointer (currently check for ->button, ->valuators or
->key) do not work as an SD may post an event through a master and mess this
check up.
Example, a device with valuators but no buttons would remove the button
class from the VCP and thus result in the
IsPointerDevice(inputInfo.pointer) == FALSE.
This will become worse in the future when new device classes are introduced
that aren't provided in the current system (e.g. a switch class).
This patch replaces isMaster with "type", one of SLAVE, MASTER_POINTER and
MASTER_KEYBOARD. All checks for dev->isMaster are replaced with an
IsMaster(dev).
dev->u.lastSlave was not signal safe since it was accessed by the DIX and
during signal handling.
Replaced with:
'dev->last.slave' for the signal handler's lastSlave (used to generate
DeviceChangedEvents), .
'dev->u.lastSlave' for the DIX lastSlave (currently only used in
change_modmap)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This type is only used in XI to give a hint of what type this device may be.
Call it xinput_type for clarity.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This approach is broken anyway. DIPT only checked for the XInput type
"MOUSE" and the only user of this is xf86ActivateDevice when it sets the
Activate/DeactivateGrab functions.
Since synaptics and wacom set their own types, evdev only sets MOUSE for,
well, mice half the devices didn't have this set correctly anyway.
Instead, ActivatePointerGrab should be merged together with
ActivateKeyboardGrab.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
