If we're notified about the existence of the wp_tablet_manager interface,
we bind to it so that we can make use of any tablets that are (or later
become) available. For each seat that exists or comes into existance at
a later point, obtain the associated tablet_seat.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
This is all just stuff we wish we had in libc, and some of this gets
used in eg. the dmx utilities build, so split it to its own library to
avoid pulling in xserver stuff.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
"bulid" isn't valid anything, and build_xwayland was already defined
above.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Implementation of new drivers matching algorithm. New approach
doesn't add duplicate drivers and ease drivers matching phase.
Signed-off-by: Karol Kosik <kkosik@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This is a work in progress that builds Xvfb, Xephyr, Xwayland, Xnest,
and Xdmx so far. The outline of Xquartz/Xwin support is in tree, but
hasn't been built yet. The unit tests are also not done.
The intent is to build this as a complete replacement for the
autotools system, then eventually replace autotools. meson is faster
to generate the build, faster to run the bulid, shorter to write the
build files in, and less error-prone than autotools.
v2: Fix indentation nits, move version declaration to project(), use
existing meson_options for version-config.h's vendor name/web.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We mostly use #ifdef throughout the tree, and this lets the generated
config.h files just be #define TOKEN instead of #define TOKEN 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Found when the meson conversion set the symbol to defined, instead of
defined to 1.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Without this, assertion failures can make life hard for users and those
trying to help them.
v2:
* Change commit log wording slightly to "can make life hard", since
apparently e.g. logind can alleviate that somewhat.
* Set default handler for SIGABRT in
hw/xfree86/common/xf86Init.c:InstallSignalHandlers() and
hw/xquartz/quartz.c:QuartzInitOutput() (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The number for it was merged to drm_mode.h in kernel 4.7, and the
output_names[] array just requires that we slot in new strings in
order.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The previous misc.h code went out of its way to allow swapping of
unaligned pointers to values. However, the members of an X
request/response are always naturally aligned within the struct, and
the buffers containing a request/response will also be aligned to at
least 8 bytes, so we can just drop it.
text data bss dec hex filename
before: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
after: 2214919 51552 132016 2398487 249917 hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Peter noted a weirdness in my new bswap code, which could use some
tests to justify it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The clever pointer tricks were actually not working, and we were doing
the byte-by-byte moves in general. By just doing the memcpy and
obvious byte swap code, we end up generating actual byte swap
instructions, thanks to optimizing compilers.
text data bss dec hex filename
before: 2240807 51552 132016 2424375 24fe37 hw/xfree86/Xorg
after: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The build defines these, so having the defaults is just a way for the
build system's configuration to get out of sync with the code.
v2: Drop #ifndefs around the other two defines.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
parser/scan.c was checking for #ifdef XCONFIGFILE and XCONFIGDIR and
defaulting to "xorg.conf", and "xorg.conf.d", so if you had changed
__XCONFIGFILE__ to anything else, it would have got out of sync.
Settle on the name without gratuitous underscores.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Fixes warning from Solaris linker:
ld: warning: symbol 'test_data' has differing sizes:
(file tests-protocol-xigetselectedevents.o value=0x418;
file tests-protocol-xigetclientpointer.o value=0x18);
tests-protocol-xigetselectedevents.o definition taken
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
It appears that on some hardware/diver combo such as nv30/nouveau, using
GL_ALPHA as format for 8-bit depth will cause an incomplete attachment
error (GL_FRAMEBUFFER_INCOMPLETE_ATTACHMENT) when trying to bind the
texture.
As a result, the FBO is NULL and glamor segfaults when trying to access
the FBO width/height in pixmap_priv_get_scale() in glamor_xv_render().
This happens with glamor-xv which uses 8-bit pixmaps, meaning that on
such hardware/driver, trying to play a video using Xv will lead to a
crash of the Xserver. This affects Xwayland, Xephyr, modesetting driver
with glamor accel.
But the use of an FBO is not actually needed for glamox-xv, so by
disabling FBO at pixmap creation, we can avoid the issue entirely.
Fix suggested by Eric Anholt <eric@anholt.net>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=100710
Fixes: https://bugzilla.redhat.com/1412814
Reviewed-by: Eric Anholt <eric@anholt.net>
This dumps a ton of configure-time checks for system endian macros.
Given that we're marking the mixed-endian fixup code as cold, getting
at the system macros is a waste of code.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
As far back as the initial import, it seems to have been exposed, and
there's no explanation why the test happened in the initial xserver
import.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Be more precise in describing the return value.
Signed-off-by: Roman Gilg <subdiff@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
E.g. because Xinerama is enabled.
Fixes crash on startup and wrong colours in that case.
Bugzilla: https://bugs.freedesktop.org/100293
Bugzilla: https://bugs.freedesktop.org/100294
Fixes: 62f4405257 ("xfree86/modes: Move gamma initialization to
xf86RandR12Init12 v2")
Tested-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Despite all the careful planning of the kernel, a link may become
insufficient to handle the currently-set mode. At this point, the
kernel should mark this particular configuration as being broken
and potentially prune the mode before setting the offending connector's
link-status to BAD and send the userspace a hotplug event. This may
happen right after a modeset or later on.
Upon receiving a hot-plug event, we iterate through the connectors to
re-apply the currently-set mode on all the connectors that have a
link-status property set to BAD. The kernel may be able to get the
link to work by dropping to using a lower link bpp (with the same
display bpp). However, the modeset may fail if the kernel has pruned
the mode, so to make users aware of this problem a warning is outputed
in the logs to warn about having a potentially-black display.
This patch does not modify the current behaviour of always propagating
the events to the randr clients. This allows desktop environments to
re-probe the connectors and select a new resolution based on the new
(currated) mode list if a mode disapeared. This behaviour is expected in
order to pass the Display Port compliance tests.
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The Contributor Covenant applies to all fd.o-hosted resources, including
lists and Bugzilla. Add a note to the README, reminding people to act
like human beings.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
All fd.o HTTP services are now HTTPS-only (with redirects, but still).
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Otherwise xcb will treat our attempt to send xv requests as a connection
error (quite reasonably: we're asking it to emit a request for which
there is no defined major opcode), and we'll die quietly the first time
we hit KdBlockhandler.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Dead code since:
commit 8aacf47e17
Author: Adam Jackson <ajax@redhat.com>
Date: Fri Oct 4 12:58:19 2013 -0400
glx: Remove DRI1 AIGLX (v2)
Signed-off-by: Adam Jackson <ajax@redhat.com>
DRM_EVENT_CONTEXT_VERSION is the latest context version supported by
whatever version of libdrm is present. modesetting was blindly asserting
it supported whatever version that may be, even if it actually didn't.
With libdrm 2.4.78, setting a higher context version than 2 will attempt
to call the page_flip_handler2 vfunc if it was non-NULL, which being a
random chunk of stack memory, it might well have been.
Set the version as 2, which should be bumped only with the appropriate
version checks.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
No driver is using these, as far as I know.
v2: Tripwire the entity hook arguments to xf86Config*Entity, fix
documentation (Eric Anholt)
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Most of this is a legacy of the old "extmod" design where you could load
_some_ extensions dynamically but only if the server had been built with
support for them in the first place.
Note that since we now only initialize the DPMS extension if at least
one screen supports it, we no longer need DPMSCapableFlag: if it would
be false, we would never read its value.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Following on from the previous change, this adds a DPMS hook to the
ScreenRec and uses that to infer DPMS support. As a result we can drop
the dpms stub code from Xext.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Rather than setting up a per-screen private, just conditionally
initialize ScrnInfoRec::DPMSSet based on the config options, and inspect
that to determine whether DPMS is supported.
We also move the "turn the screen back on at CloseScreen" logic into the
DPMS extension's (new) reset hook. This would be a behavior change for
the non-xfree86 servers, if any of them had non-stub DPMS support.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
A null pointer dereference can occur in dmxSync, because TimerForce
does not handle a null pointer.
dmxSyncTimer is set to NULL a few lines above on a certain condition,
which happened on my machine. The explicit NULL check allowed me to
start Xdmx again without a segmentation fault.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Declared as unsigned short in xkb/xkbAccessX.c.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
GLX_ARB_create_context, which we aspire to support, allows making GL 3.0
or newer contexts current with null current drawables. Strictly this
might not be legal for pre-3.0 contexts, but there's no harm in allowing
it anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The X Server never generates a global config.h, and instead all these
paths are including dix-config.h or xorg-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
It had nothing left in it that was used but wasn't in dix-config.h.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The actual code was gone in 27819950e4,
but some checks remained.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
ajax deleted the evdev driver in the removal of fbdev and the linux
backend.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
No matter what libdrm version was installed, it always set
the GLAMOR_HAS_DRM_NAME_FROM_FD_2 conditional to 1.
This obviously leads to compilation problems.
Fixes: 9232835bd1 ("glamor: use drmGetDeviceNameFromFD2 when available")
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-and-Tested-by: Qiang Yu <Qiang.Yu@amd.com>
There is no pixmap associated with source-only pictures.
Fixes Xephyr -fakexa crashing on startup.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Multiple calls to xf86EdidMonitorSet (which can be triggered e.g. by
running xrandr) would potentially keep adding the same modes, causing
the Monitor->Modes list to keep growing larger and using up more memory.
Fix this by calling xf86PruneDuplicateModes after adding the modes
returned by xf86DDCGetModes. This makes sure there's only one instance
of each unique mode in the list.
v2:
* Replace semicolon with {} for empty for loop (Emil Velikov)
* Slightly tweak commit log to avoid minor inaccuracy about what
xf86PruneDuplicateModes does
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99521
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
