For link local addresses the XDMCP server would need to either know the
interface thru a scope identifier or try all available interfaces. If
they don't this address will fail in which case the XDMCP server could
still try the other addresses passed - however some only try the first
address and then give up.
Even if this seems to be the wrong place to fix this it seems to be
easier than fixing all display servers.
[ajax: Cleaned up commit message]
Reviewed-by: Adam Jackson <ajax@redhat.com>
As the man page for the latter states:
The effects of signal() in a multithreaded process are unspecified.
We already have an interface to call sigaction() instead, use it.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Timer processing can happen on either the main thread or the input
thread. As a result, it must be done under the input lock.
Signals are unrelated to timers now that SIGIO isn't used for input
processing, so stop blocking signals while processing timers.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
If the server calls AbortServer during the first-time initialization
(which can happen if you start the server on an already using
DISPLAY), then the dbus code will shut down and call the notify fd
interface. If the notify fd list hasn't been initialized, the server
will crash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The list of input devices may be changed by hotplugging while the
server is active, and those changes may come from either the main
thread or the input thread. That means the list of input devices needs
to be protected by a mutex.
This prevents input drivers from receiving I/O ready callbacks after
removing a device.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
input_force_unlock was mis-using input_mutex_lock and leaving it set
to -1. As this is executed from OsInit at each server generation, on
the second time through, the mutex would be left locked (!) due to the
trylock call. This caused input to fail after the first server reset.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This matches a change made in xcb and improves performance for a small
increase in memory usage.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
By the time we get to ComputeLocalClient, we've already done
NextAvailableClient → ReserveClientIds → DetermineClientCmd (assuming
we're built with #define CLIENTIDS), so we can look up the name of the
client process and refuse to treat ssh's X forwarding as if it were
local.
v2: (Michel Dänzer)
* Only match "ssh" itself, not other executable names starting with
that prefix.
* Ignore executable path for the match.
v3: (Michel Dänzer)
* Use GetClientCmdName (Mark Kettenis)
* Perform check on Windows as well, but only ignore path on Cygwin
(Martin Peres, Emil Velikov, Jon Turney)
v4: (Michel Dänzer)
* Cut of any colon and whatever comes after it. (Adam Jackson)
* Add bugzilla reference.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93261
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
The type of fd_mask was changed in Cygwin 2.4.0 headers from 'long' to
'unsigned long'. This exposes an existing problem with winauth.c, which
includes Xwindows.h (which includes windows.h, which defines WIN32),
before including osdep.h, which causes the now conflicting definition of
fd_mask in osdep.h to be exposed:
In file included from ../os/osdep.h:198:18: error: conflicting types for
‘fd_mask’ typedef long int fd_mask; /usr/include/sys/select.h:46:23:
note: previous declaration of ‘fd_mask’ was here typedef unsigned long
fd_mask;
Adjust the include guards in osdep.h to make sure we only use WIN32
guarded code when not compiling for Cygwin (i.e. WIN32 && !__CYGWIN__)
This isn't a very elegant, but unfortunately appears to be the best
solution, since it doesn't seem to be possible to write the test in a
positive form.
Future work: Should also audit of all the other uses of WIN32 in
xserver, and make sure they are correct.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Removed from xtrans in 2012, and never wired up in the modular build
anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
When -displayfd is looping through the possible display ids to use,
if it can't open all the listening sockets for one (say when :0 is
already in use), it calls CloseWellKnownConnections to close all
the ListenTransConns entries before the point that ListenTransFds
was allocated & initialized, so CloseWellKnownConnections would
segfault trying to read entries from a NULL ListenTransFds pointer.
Introduced by commit 7b02f0b8
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Fixes https://bugs.freedesktop.org/show_bug.cgi?id=93212
Previously all X servers started with -displayfd would overwrite
Xorg.0.log - now a temporary name of Xorg.pid-<pid>.log is used
until after -displayfd finds an open display - then it is renamed
to the traditional Xorg.<display>.log name.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Replace the custom path for dealing with new incoming connections with
the general-purpose NotifyFd API.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This removes the block and wakeup handlers and replaces them with a
combination of a NotifyFd callback and timers.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This adds the ability to be notified when a file descriptor is
available for writing.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This provides a callback-based interface to monitor file
descriptors beyond the usual client and device interfaces.
Modules within the server using file descriptors for reading and/or
writing can call
Bool SetNotifyFd(int fd, NotifyFdProcPtr notify_fd, int mask, void *data);
mask can be any combination of X_NOTIFY_READ and X_NOTIFY_WRITE.
When 'fd' becomes readable or writable, the notify_fd function will be
called with the 'fd', the ready conditions and 'data' values as arguments,
When the module no longer needs to monitor the fd, it will call
void RemoveNotifyFd(int fd);
RemoveNotifyFd may be called from the notify function.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows the server to call GetTimeInMillis() after each request is
processed to avoid needing setitimer. -dumbSched now turns off the
setitimer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Globally replace #ifdef and #if defined usage of 'sun' with '__sun'
such that strict ISO compiler modes such as -ansi or -std=c99 can be used.
Signed-off-by: Richard PALO <richard@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
In WaitForSomething(), the fd_set clientsWritable may be used
unitialized when the boolean AnyClientsWriteBlocked is set in the
WakeupHandler(). This leads to a crash in FlushAllOutput() after
x11proto's commit 2c94cdb453bc641246cc8b9a876da9799bee1ce7.
The problem did not manifest before because both the XFD_SIZE and the
maximum number of clients were set to 256. As the connectionTranslation
table was initalized for the 256 clients to 0, the test on the index not
being 0 was aborting before dereferencing the client #0.
As of commit 2c94cdb453bc641246cc8b9a876da9799bee1ce7 in x11proto, the
XFD_SIZE got bumped to 512. This lead the OutputPending fd_set to have
any fd above 256 to be uninitialized which in turns lead to reading an
index after the end of the ConnectionTranslation table. This index would
then be used to find the client corresponding to the fd marked as
pending writes and would also result to an out-of-bound access which
would usually be the fatal one.
Fix this by zeroing the clientsWritable fd_set at the beginning of
WaitForSomething(). In this case, the bottom part of the loop, which
would indirectly call FlushAllOutput, will not do any work but the next
call to select will result in the execution of the right codepath. This
is exactly what we want because we need to know the writable clients
before handling them. In the end, it also makes sure that the fds above
MaxClient are initialized, preventing the crash in FlushAllOutput().
Thanks to everyone involved in tracking this one down!
Reported-by: Karol Herbst <freedesktop@karolherbst.de>
Reported-by: Tobias Klausmann <tobias.klausmann@mni.thm.de>
Signed-off-by: Martin Peres <martin.peres@linux.intel.com>
Tested-by: Tobias Klausmann <tobias.klausmann@mni.thm.de>
Tested-by: Martin Peres <martin.peres@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91316
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Olivier Fourdan <ofourdan@redhat.com
Cc: Adam Jackson <ajax@redhat.com>
Cc: Alan Coopersmith <alan.coopersmith@oracle.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xdmcp.c:1404:1: warning: function 'XdmcpFatal' could be declared with attribute 'noreturn'
[-Wmissing-noreturn,Semantic Issue]
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
xdmauth.c:230:13: warning: absolute value function 'abs' given an argument of type 'long' but has parameter of
type
'int'
which may cause truncation of value [-Wabsolute-value,Semantic Issue]
if (abs(now - client->time) > TwentyFiveMinutes) {
^
xdmauth.c:230:13: note: use function 'labs' instead [Semantic Issue]
if (abs(now - client->time) > TwentyFiveMinutes) {
^~~
labs
xdmauth.c:302:9: warning: absolute value function 'abs' given an argument of type 'long' but has parameter of type
'int' which
may cause truncation of value [-Wabsolute-value,Semantic Issue]
if (abs(client->time - now) > TwentyMinutes) {
^
xdmauth.c:302:9: note: use function 'labs' instead [Semantic Issue]
if (abs(client->time - now) > TwentyMinutes) {
^~~
labs
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
These extensions were accessing internal OS functions and
structures. Expose the necessary functionality to them and remove
their use of osdep.h
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
There was a complicated scheme to increase the time between keepalives
from 3 minutes up to as much as 24 hours in an attempt to reduce
network traffic from idle X terminals. X terminals receiving X
traffic, or receiving user input would use the 3 minute value; X
terminals without any network traffic would use a longer value.
However, this was actually broken -- any activity in the X server,
either client requests or user input, would end up resetting the
keepalive timeout, so a user mashing on the keyboard would never
discover that the XDMCP master had disappeared and have the session
terminated, which was precisely the design goal of the XDMCP keepalive
mechanism.
Instead of attempting to fix this, accept the cost of a pair of XDMCP
packets once every three minutes and just perform keepalives
regularly.
This will also make reworking the block and wakeup handler APIs to
eliminate select masks easier.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The X server used to wait for the user to hit a key or move the mouse
before restarting the session after a keepalive failure. This,
presumably, was to avoid having the X server continuously spew XDMCP
protocol on the network while the XDM server was dead.
Switching into this state was removed from the server some time before
XFree86 4.3.99.16, so the remaining bits of code have been dead for
over a decade, and no-one ever noticed.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 4b4b9086 "os: support new implicit local user access mode [CVE-2015-3164
2/3]" carefully places the relevant code it adds under !NO_LOCAL_CLIENT_CRED,
but unfortunately doesn't notice that NO_LOCAL_CLIENT_CRED is defined as a
side-effect in the middle of GetLocalClientCreds(), so many of these checks
precede its definition.
Move the check if NO_LOCAL_CLIENT_CRED should be defined to configure.ac, so it
always occurs before it's first use.
v2:
Move check to configure.ac
v3:
Use AC_CACHE_CHECK and name cache varaible appropriately
[ajax: Massaged commit message]
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Ray Strode <rstrode@redhat.com>
Commit 94ab7455 added SA_RESTART to the SIGALRM handler. However, the
Popen code tears down and recreates the SIGALRM handler via OsSignal(),
and this flag is dropped at this time.
Clean the code to use just a single codepath for creating this signal
handler, always applying SA_RESTART.
[ajax: Fixed commit id]
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
The X server frequently deals with SIGIO and SIGALRM interruptions.
If process execution is inside certain blocking system calls
when these signals arrive, e.g. with the kernel blocked on
a contended semaphore, the system calls will be interrupted.
Some system calls are automatically restartable (the kernel re-executes
them with the same parameters once the signal handler returns) but
only if the signal handler allows it.
Set SA_RESTART on the signal handlers to enable this convenient
behaviour.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Make the maximum number of clients user configurable, either from the command
line or from xorg.conf
This patch works by using the MAXCLIENTS (raised to 512) as the maximum
allowed number of clients, but allowing the actual limit to be set by the
user to a lower value (keeping the default of 256).
There is a limit size of 29 bits to be used to store both the client ID and
the X resources ID, so by reducing the number of clients allowed to connect to
the X server, the user can increase the number of X resources per client or
vice-versa.
Parts of this patch are based on a similar patch from Adam Jackson
<ajax@redhat.com>
This now requires at least xproto 7.0.28
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
backtrace.c uses a word size provided by libunwind. In some
architectures like MIPS, libunwind makes that word size 64-bit for all
variants of the architecture.
In the lines #90 and #98, backtrace.c tries to do a cast to a pointer,
which fails in all MIPS variants with 32-bit pointers, like MIPS32 or
MIPS64 n32, because it's trying to do a cast from a 64-bit wide variable
to a 32-bit pointer:
Making all in os
make[2]: Entering directory
`/home/test/test/1/output/build/xserver_xorg-server-1.15.1/os'
CC WaitFor.lo
CC access.lo
CC auth.lo
CC backtrace.lo
backtrace.c: In function 'xorg_backtrace':
backtrace.c:90:20: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
if (dladdr((void *)(pip.start_ip + off), &dlinfo) &&
dlinfo.dli_fname &&
^
backtrace.c:98:13: error: cast to pointer from integer of different size
[-Werror=int-to-pointer-cast]
(void *)(pip.start_ip + off));
^
cc1: some warnings being treated as errors
make[2]: *** [backtrace.lo] Error 1
make[2]: *** Waiting for unfinished jobs....
Making the cast to a pointer-sized integer, and then to a pointer fixes
the problem.
Related:
https://bugs.freedesktop.org/show_bug.cgi?id=79939
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If the X server is started without a '-auth' argument, then
it gets started wide open to all local users on the system.
This isn't a great default access model, but changing it in
Xorg at this point would break backward compatibility.
Xwayland, on the other hand is new, and much more targeted
in scope. It could, in theory, be changed to allow the much
more secure default of a "user who started X server can connect
clients to that server."
This commit paves the way for that change, by adding a mechanism
for DDXs to opt-in to that behavior. They merely need to call
LocalAccessScopeUser()
in their init functions.
A subsequent commit will add that call for Xwayland.
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
xorg/xserver/os/utils.c: In function ‘Win32TempDir’:
xorg/xserver/os/utils.c:1643:1: warning: old-style function definition [-Wold-style-definition]
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Xtrans.h must be included on WIN32 to prototype _XSERVTransWSAStartup()
xserver/os/xdmcp.c: In function ‘get_addr_by_name’:
xserver/os/xdmcp.c:1483:5: error: implicit declaration of function ‘_XSERVTransWSAStartup’ [-Werror=implicit-function-declaration]
Signed-off-by: Colin Harrison <colin.harrison@virgin.net>
Reviewed-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Wrapper for realloc() that checks for overflow when multiplying
arguments together, so we don't have to add overflow checks to
every single call. For documentation on usage, see:
http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man3/calloc.3
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Acked-by: Matt Turner <mattst88@gmail.com>
The xnfcalloc() macro took two arguments but simply multiplied them
together without checking for overflow and defeating any overflow
checking that calloc() might have done. Let's not do that.
The original XNFcalloc() function is left for now to preserve driver
ABI, but is marked as deprecated so it can be removed in a future round
of ABI break/cleanup.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
XdmcpFatal uses the format specifier %*.*s, which vpnprintf() doesn't
understand, which causes a backtrace and prevents the reason for the XDMCP
failure being logged.
See also:
https://bugs.freedesktop.org/show_bug.cgi?id=66862https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=758574
"%*.*s" is also currently used in a few other places, so teach vpnprintf() how
to handle it
$ fgrep -r "%*.*s" *
hw/dmx/config/scanner.l: fprintf(stderr, "parse error on line %d at token \"%*.*s\"\n",
hw/dmx/dmxlog.c: ErrorF("(%s) dmx[i%d/%*.*s]: ", type,
hw/dmx/input/dmxinputinit.c: dmxLogCont(dmxInfo, "\t[i%d/%*.*s",
os/access.c: ErrorF("Xserver: siAddrMatch(): type = %s, value = %*.*s -- %s\n",
os/access.c: ("Xserver: siCheckAddr(): type = %s, value = %*.*s, len = %d -- %s\n",
os/xdmcp.c: FatalError("XDMCP fatal error: %s %*.*s\n", type,
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
In X server 1.17, the default configuration is now -nolisten tcp. In this
configuration, XDMCP options don't work usefully, as the X server is not
listening on the port for the display that it tells the display manager to
connect to.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Since _XSERVTransClose frees the connection pointer passed to it,
remove that pointer from the array, so we don't try to double free it
if we come back into CloseWellKnownConnections again.
Should fix https://bugzilla.yoctoproject.org/show_bug.cgi?id=6665 in which
the shutdown section of the main() loop called CloseWellKnownConnections()
and then moved on to ddxGiveUp(), which failed to release the VT and thus
called AbortServer(), which called CloseWellKnownConnections() again.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This was reported on irc on Fedora when rawhide went to 1.17.1.
regression occured in: 2566835b43
os: Eliminate uninitialized value warnings from access.c
siAddrMatch doesn't need addr to be a useful value, it checks
some things like localuser without having an address at all.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
