With the shadow framebuffer overallocation bug fixed (ref below), Xorg +
fbdev has tens to hundreds of kilobytes more baseline memory usage than
Xfbdev. That's not nothing, but it's little enough that we should focus
our efforts on the server that actually gets development attention.
https://cgit.freedesktop.org/xorg/driver/xf86-video-fbdev/commit/?id=2c5eba8
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
- typo in #ifdef check
- also need to add AC_CHECK_FUNCS([arc4random_buf])
Reported-by Eric Engestrom. Thanks
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Provide the function definition for systems that don't have it.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Xwayland support for pointer locking in confinement requires
wayland-protocols version 1.7 or later.
Update the required version in configure.ac to match the minimal
required version of wayland-protocols.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
The lower layers also do this, but no damage may be reported there,
since we unwrap before calling down.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99220
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
V2:
1. update comment
2. check bustype if PCI
3. configure add libdrm version check for drmGetDevice
Get PCI information from info->fd with drmGetDevice instead of
assuming the info->fd is the first entity of scrn which is not
true for multi entities scrn.
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Commit 501d8e2b removed --enable-aiglx, but made xwin always be
--enable-glx.
Signed-off-by: Mihail Konev <k.mvc@ya.ru>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jon Turney <jon.turney@dronecode.org.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It fixes a bug where the version reported by drmGetLibVersion() was
'wrong'. See libdrm commit 79038751ffe("libdrm: add support for server
side functionality in libdrm") for details.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The former contains the minimum required version which is required.
Strictly speaking Xephyr/Xwayland may require version greater than the
current 2.3.0, although I've personally haven't checked the specifics.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Afaict there's little-to-no reason/way one would want xserver without
DRI support on Solaris platforms.
This will allow us to simplify/fix all the libdrm detection in the next
commit.
Cc: Alan Coopersmith <alan.coopersmith@oracle.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Presently the option guards both direct and accelerated indirect GLX. As
such when one toggles it off they end up without any acceleration.
Remove the option all together until we have the time to split/rework
things.
Cc: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Will be used for getting unaccelerated motion events and later for
relative motions used by a pointer warp emulator.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This code is based on local patches which had been sitting in
FreeBSD and OpenBSD ports.
Reviewed-by: Matthieu Herrb <matthieu@herrb.eu>
Signed-off-by: François Tigeot <ftigeot@wolfpond.org>
If windowsdriproto headers are available, build a Windows-DRI extension,
which supports requests to enable local clients to directly render GL to a
Windows drawable:
- a query to check if WGL is being used on a screen
- a query to map a fbconfigID to a native pixelformatindex
- a query to map a drawable to a native handle
Windows-DRI can only be useful if we are using WGL, so make an note if WGL
is active on a screen.
Make validGlxDrawable() public
Adjust glxWinSetPixelFormat() so it doesn't require a context, just a
screen and config.
That enables factoring out the deferred drawable creation code as
glxWinDeferredCreateDrawable()
Enhance glxWinDeferredCreateDrawable(), so that pixmaps are placed into a
file mapping, so they exist in memory which can be shared with the direct
rendering process.
Currently, this file mapping is accessed by a name generated from the XID.
This will not be unique across multiple server instances. It would perhaps
be better, although more complicated, to use an anonymous file mapping, and
then duplicate the handle for the direct rendering process.
Use glxWinDeferredCreateDrawable() to ensure the native handle exists for
the Windows-DRI query to map a drawable to native handle.
v2:
Various printf format warning fixes
v3:
Fix format warnings on x86
Move some uninteresting windows-dri output to debug log level
v4:
check for windowsdriproto when --enable-windowsdri
use windowsdriproto_CFLAGS
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Autoconf logic borrowed from glib
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Requires gbm when building Xorg so that xf86-video-modesetting will
work.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This provides a wrapper around poll or epoll providing a
callback-based interface for monitoring activity on a large set of
file descriptors.
v2: use xserver_poll API instead of poll. Don't use WSAPoll as
that is broken.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
v2: rename as 'xserver_poll' to avoid potential library name
collisions. Provide 'xserver_poll.h' which uses the system
poll where available and falls back to this emulation otherwise.
Autodetects when this is required, building the emulation only
then
Source: https://github.com/bmc/poll
Signed-off-by: Adam Jackson <ajax@redhat.com>
This new libXfont API eliminates exposing internal X server symbols to
the font library, replacing those with a struct full of the entire API
needed to use that library.
v2: Use libXfont2 instead of libXfont_2
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Fixes weird link errors of the form:
CCLD Xvfb
../../Xext/.libs/libXext.a(xvmc.o): In function `xf86XvMCRegisterDRInfo':
/home/ajax/git/xserver/Xext/xvmc.c:828: undefined reference to `strlcpy'
/home/ajax/git/xserver/Xext/xvmc.c:829: undefined reference to `strlcpy'
../../os/os.O: In function `siHostnameAddrMatch':
/home/ajax/git/xserver/os/access.c:1821: undefined reference to `strlcpy'
../../os/os.O: In function `AuthAudit':
/home/ajax/git/xserver/os/connection.c:555: undefined reference to `strlcpy'
/home/ajax/git/xserver/os/connection.c:574: undefined reference to `strlcpy'
../../os/os.O:/home/ajax/git/xserver/os/log.c:972: more undefined references to `strlcpy' follow
collect2: error: ld returned 1 exit status
Makefile:688: recipe for target 'Xvfb' failed
make[3]: *** [Xvfb] Error 1
Makefile:749: recipe for target 'all-recursive' failed
make[2]: *** [all-recursive] Error 1
Makefile:608: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
Makefile:776: recipe for target 'all-recursive' failed
make: *** [all-recursive] Error 1
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
A new --with-fallback-input-driver=foo option allows selecting a
fallback driver for the server if the driver configured for the device
is not found. Note that this only applies when the device has a driver
assigned and that module fails to load, devices without a driver are
ignored as usual.
This avoids the situation where a configuration assigns e.g. the
synaptics driver but that driver is not available on the system,
resulting in a dead device. A fallback driver can at least provides some
functionality.
This becomes more important as we move towards making other driver true
leaf nodes that can be installed/uninstalled as requested. Specifically,
wacom and synaptics, a config that assigns either driver should be
viable even when the driver itself is not (yet) installed on the system.
It is up to the distributions to make sure that the fallback driver is
always installed. The fallback driver can be disabled with
--without-fallback-input-driver and is disabled by default on non-Linux
systems because we don't have generic drivers on those platforms.
Default driver on Linux is libinput, evdev is the only other serious
candidate here.
Sample log output:
[ 3274.421] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4)
[ 3274.421] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad weird driver"
[ 3274.421] (II) LoadModule: "banana"
[ 3274.422] (WW) Warning, couldn't open module banana
[ 3274.422] (II) UnloadModule: "banana"
[ 3274.422] (II) Unloading banana
[ 3274.422] (EE) Failed to load module "banana" (module does not exist, 0)
[ 3274.422] (EE) No input driver matching `banana'
[ 3274.422] (II) Falling back to input driver `libinput'
.. server proceeds to assign libinput, init the device, world peace and rainbows
everywhere, truly what a sight. Shame about the banana though.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
By default the X server will try CLOCK_MONOTONIC_COARSE before
CLOCK_MONOTONIC, while A Wayland compositor may only support getting
their timestamps from the CLOCK_MONOTONIC clock. This causes various
issues since it may happen that a timestamp from CLOCK_MONOTONIC
retrieved before a sending an X request will still be "later" than the
timestamp the X server than gets after receiving the request, due to the
fact that CLOCK_MONOTONIC_COARSE has a lower resolution.
To avoid these issues, make Xwayland always use CLOCK_MONOTONIC, so
that it becomes possible for Wayland compositor only supporting
CLOCK_MONOTONIC and X server to use the same clock.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The current SIGIO signal handler method, used at generation of input events,
has a bunch of oddities. This patch introduces an alternative way using a
thread, which is used to select() all input device file descriptors.
A mutex was used to control the access to input structures by the main and input
threads. Two pipes to emit alert events (such hotplug ones) and guarantee the
proper communication between them was also used.
Co-authored-by: Fernando Carrijo <fcarrijo@freedesktop.org>
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
v2: Fix non-Xorg link. Enable where supported by default.
This also splits out the actual enabling of input threads to
DDX-specific patches which follow
v3: Make the input lock recursive
v4: Use regular RECURSIVE_MUTEXes instead of rolling our own
Respect the --disable-input-thread configuration option by
providing stubs that expose the same API/ABI.
Respond to style comments from Peter Hutterer.
v5: use __func__ in inputthread debug and error mesages.
Respond to style comments from Peter Hutterer.
v6: use AX_PTHREAD instead of inlining pthread tests.
Suggested by Emil Velikov <emil.l.velikov@gmail.com>
v7: Use pthread_sigmask instead of sigprocmask when using threads
Suggested by Adam Jackson <ajax@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This removes all of the SIGIO handling support used for input
throughout the X server, preparing the way for using threads for input
handling instead.
Places calling OsBlockSIGIO and OsReleaseSIGIO are marked with calls
to stub functions input_lock/input_unlock so that we don't lose this
information.
xfree86 SIGIO support is reworked to use internal versions of
OsBlockSIGIO and OsReleaseSIGIO.
v2: Don't change locking order (Peter Hutterer)
v3: Comment weird && FALSE in xf86Helper.c
Leave errno save/restore in xf86ReadInput
Squash with stub adding patch (Peter Hutterer)
v4: Leave UseSIGIO config parameter so that
existing config files don't break (Peter Hutterer)
v5: Split a couple of independent patch bits out
of kinput.c (Peter Hutterer)
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
DRI2 detection could fail if configure is invoked with a sysroot passed
as CFLAGS. Ideally configure should invoke gcc with the sysroot argument
passed to the configure script, but for some reason this is not done by
AC_COMPILE_IFELSE.
Fix this by ensuring CFLAGS are preserved when checking for stuff.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Convert the code for the multiwindow mode internal window manager to xcb
xcb conversion avoids xlib/xserver namespace collision and _XSERVER64 type
sizing issues
v2: Various fixes
v3: Don't include X11/extensions/windowswmstr.h, which uses the Display type
and thus depends on Xlib.h, just for _WINDOWSWM_NATIVE_HWND
v4: Fix indentation, add some error handling.
Fix a bug with ConfigureNotify handling
v5: Fix a bug which prevented WM_NORMAL_HINTS from being checked
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
Convert the code for converting an X11 icon to Win32 icon from Xlib to xcb.
v2: some warning fixes in winXIconToHICON()
v3: declaration-after-statement warning fixes
v4: printf format fixes
v5: convert in place rather than in a library
This also avoids the xlib/xserver namespace collision issues, so
winmultiwindowicons.h can be included everywhere it should be, which fixes
compilation with -Werror=implicit-function-declaration
Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
This allows building Xwayland without Xorg and still include the
vidmode extension.
v2: Use PKG_CHECK_EXISTS instead of PKG_CHECK_MODULES
Signed-off-by: Rui Matos <tiagomatos@gmail.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We had HAVE_POSIX_FALLOCATE checks, but no such macros were ever
defined anywhere. This commit makes it so that this macro is defined if
the posix_fallocate is detected during configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Currently Xephyr doesn't inherit host X server's keymap, which
may lead to keymap mismatches when using a non-US keyboard in a
window inside Xephyr. This patch makes Xephyr change its keymap
to match host X server's one (unless XKB support is disabled),
using xcb-xkb to retrieve the needed XKB controls.
This implementation is analogous to Xnest one at commit 83fef4235.
Supersedes: https://patchwork.freedesktop.org/patch/67504
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Laércio de Sousa <laerciosousa@sme-mogidascruzes.sp.gov.br>
Bugzilla: https://bugs.freedesktop.org/93883
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>