.\" $XdotOrg: xserver/xorg/hw/xfree86/doc/man/Xorg.man.pre,v 1.3 2005/07/04 18:41:01 ajax Exp $ .TH __xservername__ __appmansuffix__ __vendorversion__ .SH NAME __xservername__ - X11R7 X server .SH SYNOPSIS .B __xservername__ .RI [\fB:\fP display ] .RI [ option .IR ... ] .SH DESCRIPTION .B __xservername__ is a full featured X server that was originally designed for UNIX and UNIX-like operating systems running on Intel x86 hardware. It now runs on a wider range of hardware and OS platforms. .PP This work was derived by the X.Org Foundation from the XFree86 Project's .I "XFree86\ 4.4rc2" release. The XFree86 release was originally derived from .I "X386\ 1.2" by Thomas Roell which was contributed to X11R5 by Snitily Graphics Consulting Service. .SH PLATFORMS .PP .B __xservername__ operates under a wide range of operating systems and hardware platforms. The Intel x86 (IA32) architecture is the most widely supported hardware platform. Other hardware platforms include Compaq Alpha, Intel IA64, AMD64, SPARC and PowerPC. The most widely supported operating systems are the free/OpenSource UNIX-like systems such as Linux, FreeBSD, NetBSD, OpenBSD, and Solaris. Commercial UNIX operating systems such as UnixWare are also supported. Other supported operating systems include GNU Hurd. Darwin and Mac OS X are supported with the XDarwin(__appmansuffix__) X server. Win32/Cygwin is supported with the XWin(__appmansuffix__) X server. .PP .SH "NETWORK CONNECTIONS" .B __xservername__ supports connections made using the following reliable byte-streams: .TP 4 .I "Local" On most platforms, the "Local" connection type is a UNIX-domain socket. On some System V platforms, the "local" connection types also include STREAMS pipes, named pipes, and some other mechanisms. .TP 4 .I TCP\/IP .B __xservername__ listens on port .RI 6000+ n , where .I n is the display number. This connection type can be disabled with the .B \-nolisten option (see the Xserver(1) man page for details). .SH "ENVIRONMENT VARIABLES" For operating systems that support local connections other than Unix Domain sockets (SVR3 and SVR4), there is a compiled-in list specifying the order in which local connections should be attempted. This list can be overridden by the .I XLOCAL environment variable described below. If the display name indicates a best-choice connection should be made (e.g. .BR :0.0 ), each connection mechanism is tried until a connection succeeds or no more mechanisms are available. Note: for these OSs, the Unix Domain socket connection is treated differently from the other local connection types. To use it the connection must be made to .BR unix:0.0 . .PP The .I XLOCAL environment variable should contain a list of one more more of the following: .PP .RS 8 .nf NAMED PTS SCO ISC .fi .RE .PP which represent SVR4 Named Streams pipe, Old-style USL Streams pipe, SCO XSight Streams pipe, and ISC Streams pipe, respectively. You can select a single mechanism (e.g. .IR XLOCAL=NAMED ), or an ordered list (e.g. \fIXLOCAL="NAMED:PTS:SCO"\fP). his variable overrides the compiled-in defaults. For SVR4 it is recommended that .I NAMED be the first preference connection. The default setting is .IR PTS:NAMED:ISC:SCO . .PP To globally override the compiled-in defaults, you should define (and export if using .B sh or .BR ksh ) .I XLOCAL globally. If you use startx(1) or xinit(1), the definition should be at the top of your .I .xinitrc file. If you use xdm(1), the definitions should be early on in the .I __projectroot__/lib/X11/xdm/Xsession script. .SH OPTIONS .B __xservername__ supports several mechanisms for supplying/obtaining configuration and run-time parameters: command line options, environment variables, the __xconfigfile__(__filemansuffix__) configuration file, auto-detection, and fallback defaults. When the same information is supplied in more than one way, the highest precedence mechanism is used. The list of mechanisms is ordered from highest precedence to lowest. Note that not all parameters can be supplied via all methods. The available command line options and environment variables (and some defaults) are described here and in the Xserver(__appmansuffix__) manual page. Most configuration file parameters, with their defaults, are described in the __xconfigfile__(__filemansuffix__) manual page. Driver and module specific configuration parameters are described in the relevant driver or module manual page. .PP In addition to the normal server options described in the Xserver(__appmansuffix__) manual page, .B __xservername__ accepts the following command line switches: .TP 8 .BI vt XX .I XX specifies the Virtual Terminal device number which .B __xservername__ will use. Without this option, .B __xservername__ will pick the first available Virtual Terminal that it can locate. This option applies only to platforms that have virtual terminal support, such as Linux, BSD, OpenSolaris, SVR3, and SVR4. .TP .B \-allowMouseOpenFail Allow the server to start up even if the mouse device can't be opened or initialised. This is equivalent to the .B AllowMouseOpenFail __xconfigfile__(__filemansuffix__) file option. .TP 8 .B \-allowNonLocalXvidtune Make the VidMode extension available to remote clients. This allows the xvidtune client to connect from another host. This is equivalent to the .B AllowNonLocalXvidtune __xconfigfile__(__filemansuffix__) file option. By default non-local connections are not allowed. .TP 8 .BI \-bgamma " value" Set the blue gamma correction. .I value must be between 0.1 and 10. The default is 1.0. Not all drivers support this. See also the .BR \-gamma , .BR \-rgamma , and .B \-ggamma options. .TP 8 .BI \-bpp " n" No longer supported. Use .B \-depth to set the color depth, and use .B \-fbbpp if you really need to force a non-default framebuffer (hardware) pixel format. .TP 8 .BI \-config " file" Read the server configuration from .IR file . This option will work for any file when the server is run as root (i.e, with real-uid 0), or for files relative to a directory in the config search path for all other users. .TP 8 .B \-configure When this option is specified, the .B __xservername__ server loads all video driver modules, probes for available hardware, and writes out an initial __xconfigfile__(__filemansuffix__) file based on what was detected. This option currently has some problems on some platforms, but in most cases it is a good way to bootstrap the configuration process. This option is only available when the server is run as root (i.e, with real-uid 0). .TP 8 .BI "\-crt /dev/tty" XX SCO only. This is the same as the .B vt option, and is provided for compatibility with the native SCO X server. .TP 8 .BI \-depth " n" Sets the default color depth. Legal values are 1, 4, 8, 15, 16, and 24. Not all drivers support all values. .TP 8 .B \-disableVidMode Disable the parts of the VidMode extension (used by the xvidtune client) that can be used to change the video modes. This is equivalent to the .B DisableVidModeExtension __xconfigfile__(__filemansuffix__) file option. .TP 8 .B \-fbbpp \fIn\fP Sets the number of framebuffer bits per pixel. You should only set this if you're sure it's necessary; normally the server can deduce the correct value from .B \-depth above. Useful if you want to run a depth 24 configuration with a 24 bpp framebuffer rather than the (possibly default) 32 bpp framebuffer (or vice versa). Legal values are 1, 8, 16, 24, 32. Not all drivers support all values. .TP 8 .B \-flipPixels Swap the default values for the black and white pixels. .TP 8 .BI \-gamma " value" Set the gamma correction. .I value must be between 0.1 and 10. The default is 1.0. This value is applied equally to the R, G and B values. Those values can be set independently with the .BR \-rgamma , .BR \-bgamma , and .B \-ggamma options. Not all drivers support this. .TP 8 .BI \-ggamma " value" Set the green gamma correction. .I value must be between 0.1 and 10. The default is 1.0. Not all drivers support this. See also the .BR \-gamma , .BR \-rgamma , and .B \-bgamma options. .TP 8 .B \-ignoreABI The .B __xservername__ server checks the ABI revision levels of each module that it loads. It will normally refuse to load modules with ABI revisions that are newer than the server's. This is because such modules might use interfaces that the server does not have. When this option is specified, mismatches like this are downgraded from fatal errors to warnings. This option should be used with care. .TP 8 .B \-isolateDevice \fIbus\-id\fP Restrict device resets to the device at .IR bus\-id . The .I bus\-id string has the form .IB bustype : bus : device : function (e.g., \(oqPCI:1:0:0\(cq). At present, only isolation of PCI devices is supported; i.e., this option is ignored if .I bustype is anything other than \(oqPCI\(cq. .TP 8 .B \-keeptty Prevent the server from detaching its initial controlling terminal. This option is only useful when debugging the server. Not all platforms support (or can use) this option. .TP 8 .BI \-keyboard " keyboard-name" Use the __xconfigfile__(__filemansuffix__) file .B InputDevice section called .I keyboard-name as the core keyboard. This option is ignored when the .B Layout section specifies a core keyboard. In the absence of both a Layout section and this option, the first relevant .B InputDevice section is used for the core keyboard. .TP 8 .BI \-layout " layout-name" Use the __xconfigfile__(__filemansuffix__) file .B Layout section called .IR layout-name . By default the first .B Layout section is used. .TP 8 .BI \-logfile " filename" Use the file called .I filename as the .B __xservername__ server log file. The default log file is .BI __logdir__/__xservername__. n .log on most platforms, where .I n is the display number of the .B __xservername__ server. The default may be in a different directory on some platforms. This option is only available when the server is run as root (i.e, with real-uid 0). .TP 8 .BR \-logverbose " [\fIn\fP]" Sets the verbosity level for information printed to the .B __xservername__ server log file. If the .I n value isn't supplied, each occurrence of this option increments the log file verbosity level. When the .I n value is supplied, the log file verbosity level is set to that value. The default log file verbosity level is 3. .TP 8 .BI \-modulepath " searchpath" Set the module search path to .IR searchpath . .I searchpath is a comma separated list of directories to search for .B __xservername__ server modules. This option is only available when the server is run as root (i.e, with real-uid 0). .TP 8 .B \-nosilk Disable Silken Mouse support. .TP 8 .B \-pixmap24 Set the internal pixmap format for depth 24 pixmaps to 24 bits per pixel. The default is usually 32 bits per pixel. There is normally little reason to use this option. Some client applications don't like this pixmap format, even though it is a perfectly legal format. This is equivalent to the .B Pixmap __xconfigfile__(__filemansuffix__) file option. .TP 8 .B \-pixmap32 Set the internal pixmap format for depth 24 pixmaps to 32 bits per pixel. This is usually the default. This is equivalent to the .B Pixmap __xconfigfile__(__filemansuffix__) file option. .TP 8 .BI \-pointer " pointer-name" Use the __xconfigfile__(__filemansuffix__) file .B InputDevice section called .I pointer-name as the core pointer. This option is ignored when the .B Layout section specifies a core pointer. In the absence of both a Layout section and this option, the first relevant .B InputDevice section is used for the core pointer. .TP 8 .B \-quiet Suppress most informational messages at startup. The verbosity level is set to zero. .TP 8 .BI \-rgamma " value" Set the red gamma correction. .I value must be between 0.1 and 10. The default is 1.0. Not all drivers support this. See also the .BR \-gamma , .BR \-bgamma , and .B \-ggamma options. .TP 8 .BI \-screen " screen-name" Use the __xconfigfile__(__filemansuffix__) file .B Screen section called .IR screen-name . By default the screens referenced by the default .B Layout section are used, or the first .B Screen section when there are no .B Layout sections. .TP 8 .B \-showconfig This is the same as the .B \-version option, and is included for compatibility reasons. It may be removed in a future release, so the .B \-version option should be used instead. .TP 8 .B \-showDefaultModulePath Print out the default module path the server was compiled with. .TP 8 .B \-showDefaultLibPath Print out the path libraries should be installed to. .TP 8 .B \-showopts For each driver module installed, print out the list of options and their argument types. .TP 8 .BI \-weight " nnn" Set RGB weighting at 16 bpp. The default is 565. This applies only to those drivers which support 16 bpp. .TP 8 .BR \-verbose " [\fIn\fP]" Sets the verbosity level for information printed on stderr. If the .I n value isn't supplied, each occurrence of this option increments the verbosity level. When the .I n value is supplied, the verbosity level is set to that value. The default verbosity level is 0. .TP 8 .B \-version Print out the server version, patchlevel, release date, the operating system/platform it was built on, and whether it includes module loader support. .SH "KEYBOARD" .PP The .B __xservername__ server is normally configured to recognize various special combinations of key presses that instruct the server to perform some action, rather than just sending the key press event to a client application. The default XKEYBOARD keymap defines the key combinations listed below. The kbd (__drivermansuffix__) driver also has these key combinations builtin to its event handler for cases where the XKEYBOARD extension is not being used. When using the XKEYBOARD extension, which key combinations perform which actions is completely configurable. .PP The special combinations of key presses recognized directly by .B __xservername__ are: .TP 8 .B Ctrl+Alt+Backspace Immediately kills the server -- no questions asked. This is disabled by default. It can be enabled with the -retro command line flag or by setting the .B DontZap __xconfigfile__(__filemansuffix__) file option to a FALSE value. .TP 8 .B Ctrl+Alt+Keypad-Plus Change video mode to next one specified in the configuration file. This can be disabled with the .B DontZoom __xconfigfile__(__filemansuffix__) file option. .TP 8 .B Ctrl+Alt+Keypad-Minus Change video mode to previous one specified in the configuration file. This can be disabled with the .B DontZoom __xconfigfile__(__filemansuffix__) file option. .TP 8 .B Ctrl+Alt+F1...F12 For systems with virtual terminal support, these keystroke combinations are used to switch to virtual terminals 1 through 12, respectively. This can be disabled with the .B DontVTSwitch __xconfigfile__(__filemansuffix__) file option. .SH CONFIGURATION .B __xservername__ typically uses a configuration file called .B __xconfigfile__ for its initial setup. Refer to the __xconfigfile__(__filemansuffix__) manual page for information about the format of this file. .PP .B __xservername__ has a mechanism for automatically generating a built-in configuration at run-time when no .B __xconfigfile__ file is present. The current version of this automatic configuration mechanism works in two ways. .PP The first is via enhancements that have made many components of the .B __xconfigfile__ file optional. This means that information that can be probed or reasonably deduced doesn't need to be specified explicitly, greatly reducing the amount of built-in configuration information that needs to be generated at run-time. .PP The second is to have "safe" fallbacks for most configuration information. This maximises the likelihood that the .B __xservername__ server will start up in some usable configuration even when information about the specific hardware is not available. .PP The automatic configuration support for __xservername__ is work in progress. It is currently aimed at the most popular hardware and software platforms supported by __xservername__. Enhancements are planned for future releases. .SH FILES The .B __xservername__ server config file can be found in a range of locations. These are documented fully in the __xconfigfile__(__filemansuffix__) manual page. The most commonly used locations are shown here. .TP 30 .B /etc/X11/__xconfigfile__ Server configuration file. .TP 30 .B /etc/X11/__xconfigfile__-4 Server configuration file. .TP 30 .B /etc/__xconfigfile__ Server configuration file. .TP 30 .B __projectroot__/etc/__xconfigfile__ Server configuration file. .TP 30 .B __projectroot__/lib/X11/__xconfigfile__ Server configuration file. .TP 30 .BI __logdir__/__xservername__. n .log Server log file for display .IR n . .TP 30 .B __projectroot__/bin/\(** Client binaries. .TP 30 .B __projectroot__/include/\(** Header files. .TP 30 .B __projectroot__/lib/\(** Libraries. .TP 30 .B __datadir__/fonts/X11/\(** Fonts. .TP 30 .B __projectroot__/share/X11/XErrorDB Client error message database. .TP 30 .B __projectroot__/lib/X11/app-defaults/\(** Client resource specifications. .TP 30 .B __mandir__/man?/\(** Manual pages. .TP 30 .BI /etc/X n .hosts Initial access control list for display .IR n . .SH "SEE ALSO" X(__miscmansuffix__), Xserver(__appmansuffix__), xdm(__appmansuffix__), xinit(__appmansuffix__), __xconfigfile__(__filemansuffix__), xvidtune(__appmansuffix__), apm(__drivermansuffix__), ati(__drivermansuffix__), chips(__drivermansuffix__), cirrus(__drivermansuffix__), cyrix(__drivermansuffix__), fbdev(__drivermansuffix__), glide(__drivermansuffix__), glint(__drivermansuffix__), i128(__drivermansuffix__), i740(__drivermansuffix__), imstt(__drivermansuffix__), intel(__drivermansuffix__), mga(__drivermansuffix__), neomagic(__drivermansuffix__), nsc(__drivermansuffix__), nv(__drivermansuffix__), openchrome (__drivermansuffix__), r128(__drivermansuffix__), rendition(__drivermansuffix__), s3virge(__drivermansuffix__), siliconmotion(__drivermansuffix__), sis(__drivermansuffix__), sunbw2(__drivermansuffix__), suncg14(__drivermansuffix__), suncg3(__drivermansuffix__), suncg6(__drivermansuffix__), sunffb(__drivermansuffix__), sunleo(__drivermansuffix__), suntcx(__drivermansuffix__), tdfx(__drivermansuffix__), tga(__drivermansuffix__), trident(__drivermansuffix__), tseng(__drivermansuffix__), v4l(__drivermansuffix__), vesa(__drivermansuffix__), vmware(__drivermansuffix__), .br Web site .IR . .SH AUTHORS __xservername__ has many contributors world wide. The names of most of them can be found in the documentation, ChangeLog files in the source tree, and in the actual source code. .PP __xservername__ was originally based on XFree86 4.4rc2. That was originally based on \fIX386 1.2\fP by Thomas Roell, which was contributed to the then X Consortium's X11R5 distribution by SGCS. .PP __xservername__ is released by the X.Org Foundation. .PP The project that became XFree86 was originally founded in 1992 by David Dawes, Glenn Lai, Jim Tsillas and David Wexelblat. .PP XFree86 was later integrated in the then X Consortium's X11R6 release by a group of dedicated XFree86 developers, including the following: .PP .RS 4 .nf Stuart Anderson \fIanderson@metrolink.com\fP Doug Anson \fIdanson@lgc.com\fP Gertjan Akkerman \fIakkerman@dutiba.twi.tudelft.nl\fP Mike Bernson \fImike@mbsun.mlb.org\fP Robin Cutshaw \fIrobin@XFree86.org\fP David Dawes \fIdawes@XFree86.org\fP Marc Evans \fImarc@XFree86.org\fP Pascal Haible \fIhaible@izfm.uni-stuttgart.de\fP Matthieu Herrb \fIMatthieu.Herrb@laas.fr\fP Dirk Hohndel \fIhohndel@XFree86.org\fP David Holland \fIdavidh@use.com\fP Alan Hourihane \fIalanh@fairlite.demon.co.uk\fP Jeffrey Hsu \fIhsu@soda.berkeley.edu\fP Glenn Lai \fIglenn@cs.utexas.edu\fP Ted Lemon \fImellon@ncd.com\fP Rich Murphey \fIrich@XFree86.org\fP Hans Nasten \fInasten@everyware.se\fP Mark Snitily \fImark@sgcs.com\fP Randy Terbush \fIrandyt@cse.unl.edu\fP Jon Tombs \fItombs@XFree86.org\fP Kees Verstoep \fIversto@cs.vu.nl\fP Paul Vixie \fIpaul@vix.com\fP Mark Weaver \fIMark_Weaver@brown.edu\fP David Wexelblat \fIdwex@XFree86.org\fP Philip Wheatley \fIPhilip.Wheatley@ColumbiaSC.NCR.COM\fP Thomas Wolfram \fIwolf@prz.tu-berlin.de\fP Orest Zborowski \fIorestz@eskimo.com\fP .fi .RE .PP __xservername__ source is available from the FTP server \fI\fP, and from the X.Org server \fI\fP. Documentation and other information can be found from the X.Org web site \fI\fP. .SH LEGAL .PP .B __xservername__ is copyright software, provided under licenses that permit modification and redistribution in source and binary form without fee. .B __xservername__ is copyright by numerous authors and contributors from around the world. Licensing information can be found at .IR . Refer to the source code for specific copyright notices. .PP .B XFree86(TM) is a trademark of The XFree86 Project, Inc. .PP .B X11(TM) and .B X Window System(TM) are trademarks of The Open Group.