andreacavalli
/
xserver-multidpi
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
xserver-multidpi/dix/BuiltInAtoms

330 lines
10 KiB
Plaintext
Raw Permalink Blame History

File: .../x11/server/dix/BuiltInAtoms
This file is of a fixed format and is used to generate both the file
include/XAtom.h and dix/initatoms.c. Neither of those files should be
edited directly. Changing the atoms in this file, or even the order in
which they occur, is equivalent to forcing a new (minor) version number
on the server. Take care.
The format of the file is that each built in atom starts in column 1
with no text, other than spaces and tabs, on that line other than a
mandatory trailing "@" at the end of the line. For each atom (Foo)
below the defines will be of the form
#define XA_Foo <n>
and the string value of the atom will be "Foo".
The comment lines in this file are not guaranteed to be accurate. To see the
current truth, look at the Xlib documentation as well as the protocol spec.
Atoms occur in five distinct name spaces within the protocol. Any particular
atom may or may not have some client interpretation within each of the name
spaces. For each of the built in atoms, the intended semantics and the space
within which it is defined is indicated.
Those name spaces are
Property names
Property types
Selections
Font properties
Type of a ClientMessage event (none built into server)
For the font properties mentioned here, see the spec for more information.
-- Selections --
PRIMARY @
Selection.
SECONDARY @
Selection.
-- Property types and names --
ARC @
Property type:
x, y: INT16
width, height: CARD16,
angle1, angle2: INT16
ATOM @
Property type:
atom: ATOM
BITMAP @
Property type:
bitmap: PIXMAP
This is asserted to be of depth 1.
CARDINAL @
Property type:
card: CARD32 or CARD16 or CARD8
the datum size is dependent on the property format
COLORMAP @
Property type:
colormap: COLORMAP
CURSOR @
Property type:
cursor: CURSOR
CUT_BUFFER0 @
CUT_BUFFER1 @
CUT_BUFFER2 @
CUT_BUFFER3 @
CUT_BUFFER4 @
CUT_BUFFER5 @
CUT_BUFFER6 @
CUT_BUFFER7 @
Property name: (type: STRING)
Used to implement cut buffer ring, in particular Andrew uses
this mechanism. Anyone else using this sort of IPC mechanism
should use these properties.
Data is normally fetched and stored out of CUT_BUFFER0; the
RotateProperties request is used to rotate these buffers.
DRAWABLE @
Property type:
drawable: DRAWABLE
FONT @
Property type:
font: FONT
INTEGER @
Property type:
card: INT32 or INT16 or INT8
the datum size is dependent on the property format
PIXMAP @
Property type:
pixmap: PIXMAP
POINT @
Property type:
x, y: INT16
RECTANGLE @
Property type:
x, y: INT16
width, height: CARD16
RESOURCE_MANAGER @
Property name: (type: STRING)
Contents of the user's resource manager data base.
RGB_COLOR_MAP @
Property type:
colormap: COLORMAP
red-max: CARD32
red-mult: CARD32
green-max: CARD32
green-mult: CARD32
blue-max: CARD32
blue-mult: CARD32
base-pixel: CARD32
The fields `red_max', `green_max', and `blue_max' give the maximum
red, green, and blue values, respectively. Each color
coefficient ranges from 0 to its max, inclusive. For example,
a common colormap allocation is 3/3/2: 3 planes for red, 3
planes for green, and 2 planes for blue. Such a colormap would
have red_max == 7, green_max = 7, and blue_max = 3. An alternate
allocation that uses only 216 colors is red_max = 5, green_max =
5, and blue_max = 5.
The fields `red_mult', `green_mult', and `blue_mult' give the
scale factors used to compose a full pixel value. (See next
paragraph.) For a 3/3/2 allocation red_mult might be 32,
green_mult might be 4, and blue_mult might be 1. For a
6-colors-each allocation, red_mult might be 36, green_mult might
be 6, and blue_mult might be 1.
The field `base_pixel' gives the base pixel value used to
compose a full pixel value. Normally base_pixel is obtained
from a call to XAllocColorPlanes(). Given integer red, green,
and blue coefficients in their appropriate ranges, one can
compute a corresponding pixel value with the expression:
r * red_mult + g * green_mult + b * blue_mult + base_pixel
For gray-scale colormaps, only the colormap, red_max, red_mult,
and base_pixel fields are defined; the other fields are
ignored. To compute a gray-scale pixel value, use:
gray * red_mult + base_pixel
This is provided to allow applications to share color maps.
RGB_BEST_MAP @
RGB_BLUE_MAP @
RGB_DEFAULT_MAP @
RGB_GRAY_MAP @
RGB_GREEN_MAP @
RGB_RED_MAP @
Property name: (type: RGB_COLOR_MAP)
The needs of most applications can be met with five colormaps.
Polite applications may need only a small RGB space, and can
use a portion of the default color map. Applications doing
high-quality RGB rendering will need an entire colormap,
filled with as large an RGB space as possible, e.g. 332. For
color separations, an application may need maximum device
resolution for each of red, green, and blue, even if this
requires three renderings with three colormaps.
Each of the above five names would be used for sharing color
maps.
STRING @
Property type:
sequence of Bytes
VISUALID @
Property type:
visual: VISUALID
WINDOW @
Property type:
window: WINDOW
WM_COMMAND @
Property name: (type: STRING)
Command line arguments used to invoke this application. The
arguments are delimited by null characters (ASCII 0).
WM_HINTS @
Property type:
flags: CARD32
input: BOOL32
initial-state: CARD32
icon-pixmap: PIXMAP
icon-window: WINDOW
icon_mask: BITMAP
icon-x, icon-y: INT32
flags contains the following bits
0x00000001 input hint
0x00000002 state hint
0x00000004 icon pixmap hint
0x00000008 icon window hint
0x00000010 icon position hint
values for initial-state
0 unspecified -> application does not
care and WM should pick one.
1 normal
2 zoomed
3 iconic
4 inactive -> application believes
itself to be seldomly used. WM may wish to
place it on an inactive menu.
This type is potentially extensible. The order is critical;
append to the end only.
Property name: (type: WM_HINTS)
Additional hints set by the client for use by the window
manager.
WM_CLIENT_MACHINE @
Property name: (type: STRING)
used to communicate with the window manager. The host name
of the machine the client is running on may be set here.
WM_ICON_NAME @
Property name: (type: STRING)
what the application would like the label to be for
the iconic form of the window.
WM_ICON_SIZE @
Property type:
minWidth, min-height: CARD32
maxWidth, max-height: CARD32
widthInc, height-inc: CARD32
Property name: (type: ICON_SIZE)
The window manager may set this property on the root window
to specify the icon sizes it allows.
WM_NAME @
Property name: (type: STRING)
used to communicate with the window manager. This is
what the application would like the label for the window.
WM_NORMAL_HINTS @
Property name: (type: SIZE_HINTS)
used to communicate with the window manager. This is size
hints for a window in its "normal" state.
WM_SIZE_HINTS @
Property type:
flags: CARD32
x, y: INT32
width, height: CARD32
min-width, min-height: CARD32
max-width, max-height: CARD32
width-inc, height-inc: CARD32
min-aspect-x, min-aspect-y: CARD32
max-aspect-x, max-aspect-y: CARD32
flags contains the following bits
0x00000001 user specified x and y
0x00000002 user specified width and height
0x00000004 program specified position
0x00000008 program specified size
0x00000010 program specified minimum size
0x00000020 program specified maximum size
0x00000040 program specified resize increment
0x00000080 program specified aspect ratio
This type is potentially extensible. The order is critical;
append to the end only.
WM_ZOOM_HINTS @
Property name: (type: SIZE_HINTS)
used to communicate with the window manager. This is size
hints for a window in its "zoomed" state.
-- Font properties --
MIN_SPACE @
Font property: CARD32
NORM_SPACE @
Font property: CARD32
MAX_SPACE @
Font property: CARD32
END_SPACE @
Font property: CARD32
SUPERSCRIPT_X @
Font property: INT32
SUPERSCRIPT_Y @
Font property: INT32
SUBSCRIPT_X @
Font property: INT32
SUBSCRIPT_Y @
Font property: INT32
UNDERLINE_POSITION @
Font property: INT32
UNDERLINE_THICKNESS @
Font property: CARD32
STRIKEOUT_ASCENT @
Font property: INT32
STRIKEOUT_DESCENT @
Font property: INT32
ITALIC_ANGLE @
Font property: INT32
X_HEIGHT @
Font property: INT32
QUAD_WIDTH @
Font property: INT32
WEIGHT @
Font property: CARD32
POINT_SIZE @
Font property: CARD32
RESOLUTION @
Font property: CARD32
The following optional properties on fonts have values that are atoms. The
atom print name is the useful information.
COPYRIGHT @
of the font distribution
NOTICE @
trademark/copyright of the character shapes
FONT_NAME @
name of this particular instance of a font
FAMILY_NAME @
name of the 'font family' to which it belongs
FULL_NAME @
full text name of the font
The following aren't in order but putting them at the end avoids encoding
changes.
CAP_HEIGHT @
Font property: CARD32
WM_CLASS @
Property name: (type: STRING)
Used (possibly by some window managers; definitely by
session managers) to look up resources in the resource
data base on behalf of the client who set this property.
There are 2 elements:
{char *resource_name; char *resource_class;}
delimited by a null character (ascii 0)
WM_TRANSIENT_FOR @
Property name: (type: WINDOW)
Used by transient top-level windows, such as dialog
boxes, to point to their logical "parents". The window
manager can then take down the dialog boxes when the
"parent" gets iconified, for instance.
Reference in New Issue View Git Blame Copy Permalink