andreacavalli/xserver-multidpi
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
d10ba4591a
xserver-multidpi/hw/xfree86/os-support/bus/zx1PCI.c

1141 lines
32 KiB
C
Raw Blame History

/*
* Copyright (C) 2002-2003 The XFree86 Project, Inc. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to
* deal in the Software without restriction, including without limitation the
* rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* Except as contained in this notice, the name of the XFree86 Project shall
* not be used in advertising or otherwise to promote the sale, use or other
* dealings in this Software without prior written authorization from the
* XFree86 Project.
*/
/*
* This file contains the glue necessary for support of HP's ZX1 chipset.
* Keep in mind that this chipset is used in both Itanium2 and PA-RISC
* architectures.
*/
#ifdef HAVE_XORG_CONFIG_H
#include <xorg-config.h>
#endif
#include "zx1PCI.h"
#include "xf86.h"
#include "xf86_OSlib.h"
#include "Pci.h"
#define MIO_BASE 0xFED00000UL /* mio register base */
#define MIO_SIZE 0x00002000UL /* 8k, minimum */
/* ZX1 mio register definitions */
#define MIO_FUNCTION0 0x0000U
#define MODULE_INFO 0x0100U
#define STATUS_CONTROL 0x0108U
#define DILLON_PRESENT 0x02UL
#define LMMIO_DIR_BASE0 0x0300U
#define LMMIO_DIR_MASK0 0x0308U
#define LMMIO_DIR_ROUTE0 0x0310U
#define LMMIO_DIR_BASE1 0x0318U
#define LMMIO_DIR_MASK1 0x0320U
#define LMMIO_DIR_ROUTE1 0x0328U
#define LMMIO_DIR_BASE2 0x0330U
#define LMMIO_DIR_MASK2 0x0338U
#define LMMIO_DIR_ROUTE2 0x0340U
#define LMMIO_DIR_BASE3 0x0348U
#define LMMIO_DIR_MASK3 0x0350U
#define LMMIO_DIR_ROUTE3 0x0358U
#define LMMIO_DIST_BASE 0x0360U
#define LMMIO_DIST_MASK 0x0368U
#define LMMIO_DIST_ROUTE 0x0370U
#define GMMIO_DIST_BASE 0x0378U
#define PORT_DISABLE 0x02UL
#define MAP_TO_LMMIO 0x04UL
#define GMMIO_DIST_MASK 0x0380U
#define GMMIO_DIST_ROUTE 0x0388U
#define IOS_DIST_BASE 0x0390U
#define IOS_DIST_MASK 0x0398U
#define IOS_DIST_ROUTE 0x03A0U
#define ROPE_CONFIG_BASE 0x03A8U
#define VGA_ROUTE 0x03B0U
#define VGA_ENABLE 0x8000000000000000UL
#define VGA_LIGHT 0x4000000000000000UL
#define IOS_DIR_BASE 0x03C0U
#define IOS_DIR_MASK 0x03C8U
#define IOS_DIR_ROUTE 0x03D0U
#define IOS_BASE 0x03D8U
#define MIO_FUNCTION1 0x1000U
#define ROPE_CONFIG 0x1040U
#define ROPE_D0 0x0100UL
#define ROPE_D2 0x0200UL
#define ROPE_D4 0x0400UL
#define ROPE_D6 0x0800UL
#define ROPE_Q0 0x1000UL
#define ROPE_Q4 0x2000UL
#define LBA_PORT0_CNTRL 0x1200U
#define LBA_PORT1_CNTRL 0x1208U
#define LBA_PORT2_CNTRL 0x1210U
#define LBA_PORT3_CNTRL 0x1218U
#define LBA_PORT4_CNTRL 0x1220U
#define LBA_PORT5_CNTRL 0x1228U
#define LBA_PORT6_CNTRL 0x1230U
#define LBA_PORT7_CNTRL 0x1238U
#define LBA_RESET_FUNCTION 0x0000000001UL
#define LBA_CLEAR_ERROR 0x0000000010UL
#define LBA_HARD_FAIL 0x0000000040UL
#define LBA_RESET_COMPLETE 0x0100000000UL
#define LBA_RESET_TIMEOUT 0x0200000000UL
#define ROPE_PAGE_CONTROL 0x1418U
/*
* Total ioa configuration space size is actually 128k, but we only need the
* first 64k.
*/
#define IOA_SIZE 0x00010000UL
/* ZX1 ioa register definitions */
#define IOA_CONFIG_ADDR 0x0040U
#define IOA_CONFIG_DATA 0x0048U
#define IOA_SECONDARY_BUS 0x0058U
#define IOA_SUBORDINATE_BUS 0x0059U
#define IOA_CONTROL 0x0108U
#define IOA_RESET_FUNCTION 0x0000000001UL
#define IOA_FORWARD_VGA 0x0000000008UL
#define IOA_CLEAR_ERROR 0x0000000010UL
#define IOA_HARD_FAIL 0x0000000040UL
#define IOA_RESET_COMPLETE 0x0100000000UL
#define IOA_LMMIO_BASE 0x0200U
#define IOA_LMMIO_MASK 0x0208U
#define IOA_GMMIO_BASE 0x0210U
#define IOA_GMMIO_MASK 0x0218U
#define IOA_WLMMIO_BASE 0x0220U
#define IOA_WLMMIO_MASK 0x0228U
#define IOA_WGMMIO_BASE 0x0230U
#define IOA_WGMMIO_MASK 0x0238U
#define IOA_IOS_BASE 0x0240U
#define IOA_IOS_MASK 0x0248U
#define IOA_ELMMIO_BASE 0x0250U
#define IOA_ELMMIO_MASK 0x0258U
#define IOA_EIOS_BASE 0x0260U
#define IOA_EIOS_MASK 0x0268U
#define IOA_GLOBAL_MASK 0x0270U
#define IOA_SLAVE_CONTROL 0x0278U
#define IOA_VGA_PEER_ENABLE 0x2000UL
#define IOA_MSI_BASE 0x0280U
#define IOA_MSI_MASK 0x0288U
#define IOA_DMA_BASE 0x02B0U
#define IOA_DMA_MASK 0x02B8U
#define IOA_ERROR_CONFIG 0x0680U
#define IOA_ERROR_PIOWRITE 0x0001UL
#define IOA_ERROR_PIOREAD 0x0002UL
#define IOA_ERROR_DMAWRITE 0x0004UL
#define IOA_ERROR_DMAREAD 0x0008UL
#define IOA_ERROR_CONFIG_MASTER 0x0010UL
#define IOA_ERROR_SMART 0x0020UL
#define IOA_ERROR_FATAL_SERR 0x0040UL
#define IOA_ERROR_ASSERT_SERR 0x0080UL
/* ? 0x0100UL */
#define IOA_ERROR_LOOPBACK 0x0200UL
#define IOA_ERROR_CONFIG_TARGET 0x0400UL
#define IOA_ERROR_IO_MASTER 0x0800UL
#define IOA_ERROR_IO_TARGET 0x1000UL
#define IOA_ERROR_MEM_MASTER 0x2000UL
#define IOA_ERROR_MEM_TARGET 0x4000UL
#define IOA_ERROR_HF_IO_FATAL 0x8000UL
#define RANGE_ENABLE 0x01UL /* In various base registers */
#define IO_MASK ((1UL << 16) - 1UL)
#define LMMIO_MASK ((1UL << 32) - 1UL)
#ifdef __ia64__
#define GMMIO_MASK ((1UL << 44) - 1UL)
#else /* PA-RISC */
#define GMMIO_MASK ((1UL << 40) - 1UL)
#endif
#define PDH_START 0xFF000000UL
#define PDH_LAST 0xFFFFFFFFUL
static CARD8 *pZX1mio = NULL,
*pZX1ioa = NULL;
/* Per-rope data */
static INT8 zx1_ropemap[8];
static CARD32 zx1_pciids[8];
static CARD64 zx1_lbacntl[8];
static int zx1_busno[8], zx1_subno[8];
/* Array of Booleans for non-empty buses */
static INT8 zx1_busnmpt[MAX_PCI_BUSES];
static pciBusFuncs_t zx1BusFuncs;
static int zx1_fakebus = -1;
static Bool zx1_hasvga = FALSE;
static pointer pZX1IoRes[8], pZX1MemRes[8]; /* Rope resources */
/* Non-PCI configuration space access macros */
#define MIO_BYTE(offset) \
(*(volatile CARD8 *)(pointer)(pZX1mio + (offset)))
#define MIO_WORD(offset) \
(*(volatile CARD16 *)(pointer)(pZX1mio + (offset)))
#define MIO_LONG(offset) \
(*(volatile CARD32 *)(pointer)(pZX1mio + (offset)))
#define MIO_QUAD(offset) \
(*(volatile CARD64 *)(pointer)(pZX1mio + (offset)))
#define IOA_BYTE(ioa, offset) \
(*(volatile CARD8 *)(pointer)(pZX1ioa + ((offset) + ((ioa) << 13))))
#define IOA_WORD(ioa, offset) \
(*(volatile CARD16 *)(pointer)(pZX1ioa + ((offset) + ((ioa) << 13))))
#define IOA_LONG(ioa, offset) \
(*(volatile CARD32 *)(pointer)(pZX1ioa + ((offset) + ((ioa) << 13))))
#define IOA_QUAD(ioa, offset) \
(*(volatile CARD64 *)(pointer)(pZX1ioa + ((offset) + ((ioa) << 13))))
/* Range definitions */
#define MAX_RANGE 16
static CARD64 bot[MAX_RANGE], top[MAX_RANGE], msk[MAX_RANGE], siz[MAX_RANGE];
static INT8 *pDecode[MAX_RANGE];
static int nRange = 0;
/* Track a resource range and assign a granularity to it */
static void
SetRange(CARD64 base, CARD64 last, CARD8 width)
{
int i;
bot[nRange] = base;
top[nRange] = last;
msk[nRange] = (CARD64)(-1L);
if (base)
msk[nRange] &= (base ^ (base - 1UL)) >> 1;
if (last + 1UL)
msk[nRange] &= (last ^ (last + 1UL)) >> 1;
if (width < 64)
msk[nRange] &= (1UL << width) - 1UL;
/* Look for overlapping ranges */
for (i = 0; i < nRange; i++) {
if ((bot[i] > top[i]) ||
(top[nRange] < bot[i]) ||
(top[i] < bot[nRange]))
continue;
/* Merge in overlapping range */
if (bot[nRange] > bot[i])
bot[nRange] = bot[i];
if (top[nRange] < top[i])
top[nRange] = top[i];
/* Assign finer granularity */
msk[nRange] &= msk[i];
bot[i] = 1UL;
top[i] = 0;
}
nRange++;
}
/* Lookup granularity associated with the range containing 'base' */
static int
GetRange(CARD64 base)
{
int i;
for (i = 0; i < nRange; i++) {
if ((bot[i] > top[i]) ||
(base < bot[i]) ||
(base > top[i]))
continue;
if (pDecode[i])
break;
/* Allocate decoding array */
msk[i]++;
siz[i] = ((top[i] - bot[i] + 1UL) / msk[i]) + 1UL;
pDecode[i] = xnfalloc(siz[i]);
(void)memset(pDecode[i], -1, siz[i]);
break;
}
return i;
}
/*
* Verify that 'bus' is a rope's secondary bus and return the pciConfigPtr of
* the associated fake PCI-to-PCI bridge.
*/
static pciConfigPtr
VerifyZX1Bus(int bus)
{
pciConfigPtr pPCI;
if ((bus < 0) || (bus >= pciNumBuses) ||
!pciBusInfo[bus] || !(pPCI = pciBusInfo[bus]->bridge) ||
(pPCI->busnum != zx1_fakebus) || (pPCI->funcnum != 0) ||
(pPCI->devnum < 0x10) || (pPCI->devnum > 0x17))
return NULL;
return pPCI;
}
/*
* This function is called to emulate the various settings in a P2P or CardBus
* bridge's control register on a ZX1-based system.
*/
static CARD16
ControlZX1Bridge(int bus, CARD16 mask, CARD16 value)
{
pciConfigPtr pPCI;
CARD64 tmp1, tmp2, tmp3, ropenum;
CARD16 current = 0;
if ((pPCI = VerifyZX1Bus(bus))) {
ropenum = pPCI->devnum & 0x07;
/*
* Start with VGA enablement. This preserves the "VGA-lite" bit
* in mio's VGA_ROUTE register, and the VPE bit in each ioa's
* SLAVE_CONTROL register.
*/
tmp1 = MIO_QUAD(VGA_ROUTE);
tmp2 = IOA_QUAD(ropenum, IOA_CONTROL) &
~(IOA_RESET_FUNCTION | IOA_CLEAR_ERROR);
if ((tmp1 & VGA_ENABLE) && ((tmp1 & 0x07UL) == ropenum)) {
current |= PCI_PCI_BRIDGE_VGA_EN;
if ((mask & PCI_PCI_BRIDGE_VGA_EN) &&
!(value & PCI_PCI_BRIDGE_VGA_EN)) {
MIO_QUAD(VGA_ROUTE) = tmp1 & ~VGA_ENABLE;
tmp2 &= ~IOA_FORWARD_VGA;
IOA_QUAD(ropenum, IOA_CONTROL) = tmp2;
}
} else if (mask & value & PCI_PCI_BRIDGE_VGA_EN) {
if (!zx1_hasvga) {
xf86MsgVerb(X_WARNING, 3,
"HP ZX1: Attempt to enable VGA routing to bus %d"
" through rope %ld disallowed\n", bus, ropenum);
value &= ~PCI_PCI_BRIDGE_VGA_EN;
} else {
if (tmp1 & VGA_ENABLE) {
/*
* VGA is routed somewhere else. Disable it.
*/
MIO_QUAD(VGA_ROUTE) = 0UL;
tmp3 = IOA_QUAD(tmp1 & 0x07UL, IOA_CONTROL);
if (tmp3 & IOA_FORWARD_VGA)
IOA_QUAD(tmp1 & 0x07UL, IOA_CONTROL) = tmp3 &
~(IOA_RESET_FUNCTION | IOA_FORWARD_VGA |
IOA_CLEAR_ERROR);
}
if (!(tmp2 & IOA_FORWARD_VGA)) {
tmp2 |= IOA_FORWARD_VGA;
IOA_QUAD(ropenum, IOA_CONTROL) = tmp2;
}
tmp1 = (tmp1 & ~0x07UL) | ropenum | VGA_ENABLE;
MIO_QUAD(VGA_ROUTE) = tmp1;
}
}
/* Move on to master abort failure enablement */
tmp1 = MIO_QUAD((ropenum << 3) + LBA_PORT0_CNTRL) &
~(LBA_RESET_FUNCTION | LBA_CLEAR_ERROR);
if ((tmp1 & LBA_HARD_FAIL) || (tmp2 & IOA_HARD_FAIL)) {
current |= PCI_PCI_BRIDGE_MASTER_ABORT_EN;
if ((mask & PCI_PCI_BRIDGE_MASTER_ABORT_EN) &&
!(value & PCI_PCI_BRIDGE_MASTER_ABORT_EN)) {
if (tmp1 & LBA_HARD_FAIL)
MIO_QUAD((ropenum << 3) + LBA_PORT0_CNTRL) =
tmp1 & ~LBA_HARD_FAIL;
if (tmp2 & IOA_HARD_FAIL) {
tmp2 &= ~IOA_HARD_FAIL;
IOA_QUAD(ropenum, IOA_CONTROL) = tmp2;
}
}
} else {
if (mask & value & PCI_PCI_BRIDGE_MASTER_ABORT_EN) {
if (!(tmp1 & LBA_HARD_FAIL))
MIO_QUAD((ropenum << 3) + LBA_PORT0_CNTRL) =
tmp1 | LBA_HARD_FAIL;
if (!(tmp2 & IOA_HARD_FAIL)) {
tmp2 |= IOA_HARD_FAIL;
IOA_QUAD(ropenum, IOA_CONTROL) = tmp2;
}
}
}
/* Put emulation of any other P2P bridge control here */
}
return (current & ~mask) | (value & mask);
}
/* Retrieves a list of the resources routed to a rope's secondary bus */
static void
GetZX1BridgeResources(int bus,
pointer *ppIoRes,
pointer *ppMemRes,
pointer *ppPmemRes)
{
pciConfigPtr pPCI = VerifyZX1Bus(bus);
if (ppIoRes) {
xf86FreeResList(*ppIoRes);
*ppIoRes =
pPCI ? xf86DupResList(pZX1IoRes[pPCI->devnum & 0x07]) : NULL;
}
if (ppMemRes) {
xf86FreeResList(*ppMemRes);
*ppMemRes =
pPCI ? xf86DupResList(pZX1MemRes[pPCI->devnum & 0x07]) : NULL;
}
if (ppPmemRes) {
xf86FreeResList(*ppPmemRes);
*ppPmemRes = NULL;
}
}
/* The fake bus */
static CARD32
zx1FakeReadLong(PCITAG tag, int offset)
{
FatalError("zx1FakeReadLong(0x%lX, 0x%X) called\n",
(unsigned long)tag, offset);
}
static void
zx1FakeWriteLong(PCITAG tag, int offset, CARD32 val)
{
FatalError("zx1FakeWriteLong(0x%lX, 0x%X, 0x%08X) called\n",
(unsigned long)tag, offset, val);
}
static void
zx1FakeSetBits(PCITAG tag, int offset, CARD32 mask, CARD32 bits)
{
CARD32 val;
val = zx1FakeReadLong(tag, offset);
val &= ~mask;
val |= bits;
zx1FakeWriteLong(tag, offset, val);
}
static pciBusFuncs_t zx1FakeBusFuncs = {
zx1FakeReadLong,
zx1FakeWriteLong,
zx1FakeSetBits
};
static pciBusInfo_t zx1FakeBus = {
0, /* configMech -- copied from bus 0 */
0, /* numDevices -- copied from bus 0 */
FALSE, /* secondary */
0, /* primary_bus -- dynamically set */
&zx1FakeBusFuncs, /* funcs */
NULL, /* pciBusPriv -- none */
NULL, /* bridge -- dynamically set */
};
void
xf86PreScanZX1(void)
{
resRange range;
unsigned long mapSize = getpagesize();
unsigned long tmp, base, ioaaddr;
unsigned long flagsd, based, lastd, maskd, routed;
unsigned long flags0, base0, last0, mask0, route0;
unsigned long flags1, base1, last1, mask1, route1;
unsigned long flags2, base2, last2, mask2, route2;
unsigned long flags3, base3, last3, mask3, route3;
unsigned long flagsg, baseg, lastg, maskg, routeg;
unsigned long flagsl, basel, lastl;
int i, rope;
/* Map mio registers (minimum 8k) */
if (mapSize < MIO_SIZE)
mapSize = MIO_SIZE;
if (!(pZX1mio = xf86MapVidMem(-1, VIDMEM_MMIO, MIO_BASE, mapSize)))
return;
/* Look for ZX1's SBA and IOC */
if (((MIO_LONG(MIO_FUNCTION0 + PCI_ID_REG) !=
DEVID(VENDOR_HP, CHIP_ZX1_SBA)) ||
(MIO_LONG(MIO_FUNCTION1 + PCI_ID_REG) !=
DEVID(VENDOR_HP, CHIP_ZX1_IOC))) &&
((MIO_LONG(MIO_FUNCTION0 + PCI_ID_REG) !=
DEVID(VENDOR_HP, CHIP_ZX2_SBA)) ||
(MIO_LONG(MIO_FUNCTION1 + PCI_ID_REG) !=
DEVID(VENDOR_HP, CHIP_ZX2_IOC)))) {
xf86UnMapVidMem(-1, pZX1mio, mapSize);
pZX1mio = NULL;
return;
}
/* Map rope configuration space */
ioaaddr = MIO_QUAD(ROPE_CONFIG_BASE);
if (!(ioaaddr & RANGE_ENABLE) || /* No ropes */
((ioaaddr = ioaaddr & ~RANGE_ENABLE) & 0x01FFFFUL) || /* Not aligned */
!(pZX1ioa = xf86MapVidMem(-1, VIDMEM_MMIO, ioaaddr, IOA_SIZE))) {
xf86UnMapVidMem(-1, pZX1mio, mapSize);
pZX1mio = NULL;
return;
}
for (i = 0; i < 8; i++) {
zx1_ropemap[i] = i;
zx1_lbacntl[i] = 0;
xf86FreeResList(pZX1IoRes[i]);
xf86FreeResList(pZX1MemRes[i]);
pZX1IoRes[i] = pZX1MemRes[i] = NULL;
}
/*
* Determine which of 8 possible ropes exist in the system. This is done
* by looking at their "coupling" to generate a list of candidates,
* whittling this list down by factoring in ROPE_PAGE_CONTROL register
* contents, then poking each candidate's configuration space to determine
* its existence.
*/
tmp = MIO_QUAD(ROPE_CONFIG);
if (tmp & ROPE_D0)
zx1_ropemap[1] = 0;
if (tmp & ROPE_D2)
zx1_ropemap[3] = 2;
if (tmp & ROPE_D4)
zx1_ropemap[5] = 4;
if (tmp & ROPE_D6)
zx1_ropemap[7] = 6;
if (tmp & ROPE_Q0)
zx1_ropemap[1] = zx1_ropemap[2] = zx1_ropemap[3] = 0;
if (tmp & ROPE_Q4)
zx1_ropemap[5] = zx1_ropemap[6] = zx1_ropemap[7] = 4;
/*
* zx2 should allow better probing support via hard-fails, so no need to
* use the ROPE_PAGE_CONTROL register. Also, zx2 always has ropes 3 & 7
* active regardless of bundling.
*/
if (MIO_LONG(MIO_FUNCTION0 + PCI_ID_REG) !=
DEVID(VENDOR_HP, CHIP_ZX2_SBA)) {
tmp = MIO_QUAD(ROPE_PAGE_CONTROL);
for (i = 0; i < 8; i++, tmp >>= 8)
if (!(CARD8)tmp)
zx1_ropemap[i] = -1;
} else {
zx1_ropemap[3] = 3;
zx1_ropemap[7] = 7;
}
for (i = 0; i < 8; ) {
if (zx1_ropemap[i] == i) {
/* Prevent hard-fails */
zx1_lbacntl[i] = MIO_QUAD((i << 3) + LBA_PORT0_CNTRL) &
~(LBA_RESET_FUNCTION | LBA_CLEAR_ERROR);
if (zx1_lbacntl[i] & LBA_RESET_TIMEOUT) {
/* Ignore this rope and its couplings */
do {
zx1_ropemap[i++] = -1;
} while ((i < 8) && (zx1_ropemap[i] < i));
continue; /* Avoid over-incrementing 'i' */
}
if (zx1_lbacntl[i] & LBA_HARD_FAIL)
MIO_QUAD((i << 3) + LBA_PORT0_CNTRL) =
zx1_lbacntl[i] & ~LBA_HARD_FAIL;
/* Poke for an ioa */
zx1_pciids[i] = IOA_LONG(i, PCI_ID_REG);
switch (zx1_pciids[i]) {
case DEVID(VENDOR_HP, CHIP_ELROY):
case DEVID(VENDOR_HP, CHIP_ZX1_LBA): /* Mercury */
case DEVID(VENDOR_HP, CHIP_ZX1_AGP8): /* QuickSilver */
case DEVID(VENDOR_HP, CHIP_ZX2_LBA):
case DEVID(VENDOR_HP, CHIP_ZX2_PCIE):
/* Expected vendor/device IDs */
zx1_busno[i] =
(unsigned int)IOA_BYTE(i, IOA_SECONDARY_BUS);
zx1_subno[i] =
(unsigned int)IOA_BYTE(i, IOA_SUBORDINATE_BUS);
break;
default:
if ((CARD16)(zx1_pciids[i] + 1U) > (CARD16)1U)
xf86MsgVerb(X_NOTICE, 0,
"HP ZX1: Unexpected vendor/device id 0x%08X"
" on rope %d\n", zx1_pciids[i], i);
/* Nobody home, or not the "right" kind of rope guest */
/*
* Restore hard-fail setting. For "active" ropes, this is done
* later.
*/
if (zx1_lbacntl[i] & LBA_HARD_FAIL) {
MIO_QUAD((i << 3) + LBA_PORT0_CNTRL) = zx1_lbacntl[i];
zx1_lbacntl[i] = 0;
}
/* Ignore this rope and its couplings */
do {
zx1_ropemap[i++] = -1;
} while ((i < 8) && (zx1_ropemap[i] < i));
continue; /* Avoid over-incrementing 'i' */
}
}
i++;
}
/* Determine if VGA is currently routed */
tmp = MIO_QUAD(VGA_ROUTE);
if (tmp & VGA_ENABLE)
zx1_hasvga = TRUE;
/*
* Decode mio resource "coarse" routing (i.e. ignoring VGA). Due to the
* rather unusual flexibility of this chipset, this is done in a number of
* stages. For each of I/O and memory, first decode the relevant registers
* to generate ranges with an associated granularity. Overlapping ranges
* are merged into a larger range with the finer granularity. Each
* original range is then more thoroughly decoded using the granularity
* associated with the merged range that contains it. The result is then
* converted into resource lists for the common layer.
*
* Note that this doesn't care whether or not read-only bits are actually
* set as documented, nor that mask bits are contiguous. This does,
* however, factor in upper limits on I/O, LMMIO anf GMMIO addresses, and
* thus assumes high-order address bits are ignored rather than decoded.
* For example, an I/O address of 0x76543210 will be treated as 0x3210
* rather than considered out-of-range. In part, this handling is a
* consequence of the fact that high-order mask bits are zeroes instead of
* ones.
*/
flagsd = 0; based = 0; lastd = 0; maskd = 0; routed = 0;
flags0 = 0; base0 = 0; last0 = 0; mask0 = 0; route0 = 0;
flags1 = 0; base1 = 0; last1 = 0; mask1 = 0; route1 = 0;
flags2 = 0; base2 = 0; last2 = 0; mask2 = 0; route2 = 0;
flags3 = 0; base3 = 0; last3 = 0; mask3 = 0; route3 = 0;
flagsg = 0; baseg = 0; lastg = 0; maskg = 0; routeg = 0;
flagsl = 0; basel = 0; lastl = 0;
if ((tmp = MIO_QUAD(IOS_DIST_BASE)) & RANGE_ENABLE) {
flagsd = RANGE_ENABLE;
maskd = MIO_QUAD(IOS_DIST_MASK);
based = tmp & maskd & (~RANGE_ENABLE & IO_MASK);
lastd = based | (~maskd & IO_MASK);
routed = MIO_QUAD(IOS_DIST_ROUTE) >> 58;
SetRange(based, lastd, routed);
}
if ((tmp = MIO_QUAD(IOS_DIR_BASE)) & RANGE_ENABLE) {
flags0 = RANGE_ENABLE;
mask0 = MIO_QUAD(IOS_DIR_MASK);
base0 = tmp & mask0 & (~RANGE_ENABLE & IO_MASK);
last0 = base0 | (~mask0 & IO_MASK);
route0 = MIO_QUAD(IOS_DIR_ROUTE) & 0x07U;
SetRange(base0, last0, 64);
}
if (flagsd) {
i = GetRange(based);
for (tmp = based; tmp <= lastd; tmp += msk[i]) {
if ((tmp & maskd) == based) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = zx1_ropemap[(tmp >> routed) & 0x07U];
}
}
flagsd = 0;
}
if (flags0) {
i = GetRange(base0);
for (tmp = base0; tmp <= last0; tmp += msk[i]) {
if ((tmp & mask0) == base0) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = zx1_ropemap[route0];
}
}
flags0 = 0;
}
for (i = 0; i < nRange; i++) {
if (!pDecode[i])
continue;
rope = pDecode[i][0];
for (base = tmp = 0; ++tmp < siz[i]; ) {
if (rope == pDecode[i][tmp])
continue;
if (rope >= 0) {
RANGE(range, (base * msk[i]) + bot[i],
(tmp * msk[i]) + bot[i] - 1UL,
RANGE_TYPE(ResExcIoBlock, 0));
pZX1IoRes[rope] =
xf86AddResToList(pZX1IoRes[rope], &range, -1);
}
base = tmp;
rope = pDecode[i][base];
}
xfree(pDecode[i]);
pDecode[i] = NULL;
}
nRange = 0;
/*
* Move on to CPU memory access decoding. For now, don't tell the common
* layer about CPU memory ranges that are either relocated to 0 or
* translated into PCI I/O.
*/
SetRange(MIO_BASE, MIO_BASE + MIO_SIZE - 1UL, 64); /* mio */
SetRange(ioaaddr, ioaaddr + ((IOA_SIZE << 1) - 1UL), 64); /* ioa */
SetRange(PDH_START, PDH_LAST, 64); /* PDH */
SetRange(MIO_BASE, LMMIO_MASK, 64); /* Completeness */
if ((tmp = MIO_QUAD(LMMIO_DIST_BASE)) & RANGE_ENABLE) {
flagsd = RANGE_ENABLE;
maskd = MIO_QUAD(LMMIO_DIST_MASK);
based = tmp & maskd & (~RANGE_ENABLE & LMMIO_MASK);
lastd = based | (~maskd & LMMIO_MASK);
routed = MIO_QUAD(LMMIO_DIST_ROUTE) >> 58;
SetRange(based, lastd, routed);
}
if ((tmp = MIO_QUAD(LMMIO_DIR_BASE0)) & RANGE_ENABLE) {
flags0 = RANGE_ENABLE;
mask0 = MIO_QUAD(LMMIO_DIR_MASK0);
base0 = tmp & mask0 & (~RANGE_ENABLE & LMMIO_MASK);
last0 = base0 | (~mask0 & LMMIO_MASK);
route0 = MIO_QUAD(LMMIO_DIR_ROUTE0) & 0x07U;
SetRange(base0, last0, 64);
}
if ((tmp = MIO_QUAD(LMMIO_DIR_BASE1)) & RANGE_ENABLE) {
flags1 = RANGE_ENABLE;
mask1 = MIO_QUAD(LMMIO_DIR_MASK1);
base1 = tmp & mask1 & (~RANGE_ENABLE & LMMIO_MASK);
last1 = base1 | (~mask1 & LMMIO_MASK);
route1 = MIO_QUAD(LMMIO_DIR_ROUTE1) & 0x07U;
SetRange(base1, last1, 64);
}
if ((tmp = MIO_QUAD(LMMIO_DIR_BASE2)) & RANGE_ENABLE) {
flags2 = RANGE_ENABLE;
mask2 = MIO_QUAD(LMMIO_DIR_MASK2);
base2 = tmp & mask2 & (~RANGE_ENABLE & LMMIO_MASK);
last2 = base2 | (~mask2 & LMMIO_MASK);
route2 = MIO_QUAD(LMMIO_DIR_ROUTE2) & 0x07U;
SetRange(base2, last2, 64);
}
if ((tmp = MIO_QUAD(LMMIO_DIR_BASE3)) & RANGE_ENABLE) {
flags3 = RANGE_ENABLE;
mask3 = MIO_QUAD(LMMIO_DIR_MASK3);
base3 = tmp & mask3 & (~RANGE_ENABLE & LMMIO_MASK);
last3 = base3 | (~mask3 & LMMIO_MASK);
route3 = MIO_QUAD(LMMIO_DIR_ROUTE3) & 0x07U;
SetRange(base3, last3, 64);
}
if ((tmp = MIO_QUAD(GMMIO_DIST_BASE)) & RANGE_ENABLE) {
flagsg = tmp & (RANGE_ENABLE | PORT_DISABLE | MAP_TO_LMMIO);
maskg = MIO_QUAD(GMMIO_DIST_MASK);
baseg = tmp & maskg &
(~(RANGE_ENABLE | PORT_DISABLE | MAP_TO_LMMIO) & GMMIO_MASK);
lastg = baseg | (~maskg & GMMIO_MASK);
tmp = routeg = MIO_QUAD(GMMIO_DIST_ROUTE) >> 58;
if (!(flagsg & (PORT_DISABLE & MAP_TO_LMMIO)) && (tmp > 26))
tmp = 26;
SetRange(baseg, lastg, tmp);
}
if ((tmp = MIO_QUAD(IOS_BASE)) & RANGE_ENABLE) {
flagsl = RANGE_ENABLE;
basel = tmp & (~RANGE_ENABLE & GMMIO_MASK);
lastl = basel | 0x001FFFFFUL;
SetRange(basel, lastl, 64);
}
if (flagsd) {
i = GetRange(based);
for (tmp = based; tmp <= lastd; tmp += msk[i]) {
if ((tmp & maskd) == based) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = zx1_ropemap[(tmp >> routed) & 0x07U];
}
}
flagsd = 0;
}
/* LMMIO distributed range does not address anything beyond 0xFED00000 */
i = GetRange(MIO_BASE);
for (tmp = MIO_BASE; tmp <= LMMIO_MASK; tmp += msk[i]) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = -1;
}
/* Dillon space can sometimes be redirected to rope 0 */
tmp = MIO_QUAD(STATUS_CONTROL);
if (!(tmp & DILLON_PRESENT)) {
i = GetRange(PDH_START);
for (tmp = PDH_START; tmp <= PDH_LAST; tmp += msk[i]) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = zx1_ropemap[0];
}
}
if (flagsg) {
unsigned long mask = (0x07UL << routeg) | maskg;
i = GetRange(baseg);
for (tmp = baseg; tmp <= lastg; tmp += msk[i]) {
if ((tmp & maskg) == baseg) {
base = (tmp - bot[i]) / msk[i];
if ((flagsg & MAP_TO_LMMIO) ||
(!(flagsg & PORT_DISABLE) &&
(tmp <= ((tmp & mask) | 0x03FFFFFFUL)))) {
pDecode[i][base] = -1;
} else {
pDecode[i][base] = zx1_ropemap[(tmp >> routeg) & 0x07U];
}
}
}
flagsg = 0;
}
if (flagsl) {
i = GetRange(basel);
for (tmp = basel; tmp <= lastl; tmp += msk[i]) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = -1;
}
flagsl = 0;
}
/* For now, assume directed LMMIO ranges don't overlap with each other */
if (flags0) {
i = GetRange(base0);
for (tmp = base0; tmp <= last0; tmp += msk[i]) {
if ((tmp & mask0) == base0) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = zx1_ropemap[route0];
}
}
flags0 = 0;
}
if (flags1) {
i = GetRange(base1);
for (tmp = base1; tmp <= last1; tmp += msk[i]) {
if ((tmp & mask1) == base1) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = zx1_ropemap[route1];
}
}
flags1 = 0;
}
if (flags2) {
i = GetRange(base2);
for (tmp = base2; tmp <= last2; tmp += msk[i]) {
if ((tmp & mask2) == base2) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = zx1_ropemap[route2];
}
}
flags2 = 0;
}
if (flags3) {
i = GetRange(base3);
for (tmp = base3; tmp <= last3; tmp += msk[i]) {
if ((tmp & mask3) == base3) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = zx1_ropemap[route3];
}
}
flags3 = 0;
}
/* Claim iao config area */
i = GetRange(ioaaddr);
for (tmp = ioaaddr; tmp < ioaaddr + (IOA_SIZE << 1); tmp += msk[i]) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = -1;
}
/* Claim mio config area */
i = GetRange(MIO_BASE);
for (tmp = MIO_BASE; tmp < (MIO_BASE + MIO_SIZE); tmp += msk[i]) {
base = (tmp - bot[i]) / msk[i];
pDecode[i][base] = -1;
}
for (i = 0; i < nRange; i++) {
if (!pDecode[i])
continue;
rope = pDecode[i][0];
for (base = tmp = 0; ++tmp < siz[i]; ) {
if (rope == pDecode[i][tmp])
continue;
if (rope >= 0) {
RANGE(range, (base * msk[i]) + bot[i],
(tmp * msk[i]) + bot[i] - 1UL,
RANGE_TYPE(ResExcMemBlock, 0));
pZX1MemRes[rope] =
xf86AddResToList(pZX1MemRes[rope], &range, -1);
}
base = tmp;
rope = pDecode[i][base];
}
xfree(pDecode[i]);
pDecode[i] = NULL;
}
nRange = 0;
return;
}
/* This is called to finalise the results of a PCI bus scan */
void
xf86PostScanZX1(void)
{
pciConfigPtr pPCI, *ppPCI, *ppPCI2;
pciBusInfo_t *pBusInfo;
int i, idx;
if (!pZX1mio)
return;
(void)memset(zx1_busnmpt, FALSE, sizeof(zx1_busnmpt));
pBusInfo = pciBusInfo[0];
/*
* Certain 2.4 & 2.5 Linux kernels add fake PCI devices. Remove them to
* prevent any possible interference with our PCI validation.
*
* Also, if VGA isn't routed on server entry, determine if VGA routing
* needs to be enabled while the server is running.
*/
idx = 0;
ppPCI = ppPCI2 = xf86scanpci(0); /* Recursion is only apparent */
while ((pPCI = *ppPCI2++)) {
switch (pPCI->pci_device_vendor) {
case DEVID(VENDOR_HP, CHIP_ELROY):
case DEVID(VENDOR_HP, CHIP_ZX1_SBA): /* Pluto function 0 */
case DEVID(VENDOR_HP, CHIP_ZX1_IOC): /* Pluto function 1 */
case DEVID(VENDOR_HP, CHIP_ZX1_LBA): /* Mercury */
case DEVID(VENDOR_HP, CHIP_ZX1_AGP8): /* QuickSilver */
case DEVID(VENDOR_HP, CHIP_ZX2_SBA):
case DEVID(VENDOR_HP, CHIP_ZX2_IOC):
case DEVID(VENDOR_HP, CHIP_ZX2_LBA):
case DEVID(VENDOR_HP, CHIP_ZX2_PCIE):
xfree(pPCI); /* Remove it */
continue;
default:
*ppPCI++ = pPCI;
idx++;
zx1_busnmpt[pPCI->busnum] = TRUE;
if (zx1_hasvga)
continue;
switch (pPCI->pci_base_class) {
case PCI_CLASS_PREHISTORIC:
if (pPCI->pci_sub_class == PCI_SUBCLASS_PREHISTORIC_VGA)
break;
continue;
case PCI_CLASS_DISPLAY:
if (pPCI->pci_sub_class == PCI_SUBCLASS_DISPLAY_VGA)
break;
continue;
default:
continue;
}
zx1_hasvga = TRUE;
continue;
}
}
/*
* Restore hard-fail settings and figure out the actual secondary and
* subordinate bus numbers.
*/
for (i = 0; i < 8; i++) {
if (zx1_ropemap[i] != i)
continue;
if (zx1_lbacntl[i] & LBA_HARD_FAIL)
MIO_QUAD((i << 3) + LBA_PORT0_CNTRL) = zx1_lbacntl[i];
while ((zx1_busno[i] < zx1_subno[i]) && !pciBusInfo[zx1_subno[i]])
zx1_subno[i]--;
if (zx1_fakebus <= zx1_subno[i])
zx1_fakebus = zx1_subno[i] + 1;
while (!zx1_busnmpt[zx1_busno[i]]) {
if (zx1_busno[i]) /* Info for bus zero is in static storage */
xfree(pciBusInfo[zx1_busno[i]]);
pciBusInfo[zx1_busno[i]++] = NULL;
if (zx1_busno[i] > zx1_subno[i])
break;
}
}
if (zx1_fakebus >= pciNumBuses) {
if (zx1_fakebus >= pciMaxBusNum)
FatalError("HP ZX1: No room for fake PCI bus\n");
pciNumBuses = zx1_fakebus + 1;
}
/* Set up our extra bus functions */
zx1BusFuncs = *(pBusInfo->funcs);
zx1BusFuncs.pciControlBridge = ControlZX1Bridge;
zx1BusFuncs.pciGetBridgeResources = GetZX1BridgeResources;
/* Set up our own fake bus to act as the root segment */
zx1FakeBus.configMech = pBusInfo->configMech;
zx1FakeBus.numDevices = pBusInfo->numDevices;
zx1FakeBus.primary_bus = zx1_fakebus;
pciBusInfo[zx1_fakebus] = &zx1FakeBus;
/* Add the fake bus' host bridge */
if (++idx >= MAX_PCI_DEVICES)
FatalError("HP ZX1: No room for fake Host-to-PCI bridge\n");
*ppPCI++ = zx1FakeBus.bridge = pPCI = xnfcalloc(1, sizeof(pciDevice));
pPCI->tag = PCI_MAKE_TAG(zx1_fakebus, 0, 0);
pPCI->busnum = zx1_fakebus;
/* pPCI->devnum = pPCI->funcnum = 0; */
pPCI->pci_device_vendor = DEVID(VENDOR_HP, CHIP_ZX1_SBA);
pPCI->pci_base_class = PCI_CLASS_BRIDGE;
/* pPCI->pci_sub_class = PCI_SUBCLASS_BRIDGE_HOST; */
pPCI->fakeDevice = TRUE;
#ifdef OLD_FORMAT
xf86MsgVerb(X_INFO, 2, "PCI: BusID 0x%.2x,0x%02x,0x%1x "
"ID 0x%04x,0x%04x Rev 0x%02x Class 0x%02x,0x%02x\n",
pPCI->busnum, pPCI->devnum, pPCI->funcnum,
pPCI->pci_vendor, pPCI->_pci_device, pPCI->pci_rev_id,
pPCI->pci_base_class, pPCI->pci_sub_class);
#else
xf86MsgVerb(X_INFO, 2, "PCI: %.2x:%02x:%1x: chip %04x,%04x"
" card %04x,%04x rev %02x class %02x,%02x,%02x hdr %02x\n",
pPCI->busnum, pPCI->devnum, pPCI->funcnum,
pPCI->pci_vendor, pPCI->_pci_device,
pPCI->pci_subsys_vendor, pPCI->pci_subsys_card,
pPCI->pci_rev_id, pPCI->pci_base_class,
pPCI->pci_sub_class, pPCI->pci_prog_if,
pPCI->pci_header_type);
#endif
/* Add a fake PCI-to-PCI bridge to represent each active rope */
for (i = 0; i < 8; i++) {
if ((zx1_ropemap[i] != i) || (zx1_busno[i] > zx1_subno[i]) ||
!(pBusInfo = pciBusInfo[zx1_busno[i]]))
continue;
if (++idx >= MAX_PCI_DEVICES)
FatalError("HP ZX1: No room for fake PCI-to-PCI bridge\n");
*ppPCI++ = pPCI = xnfcalloc(1, sizeof(pciDevice));
pPCI->busnum = zx1_fakebus;
pPCI->devnum = i | 0x10;
/* pPCI->funcnum = 0; */
pPCI->tag = PCI_MAKE_TAG(zx1_fakebus, pPCI->devnum, 0);
pPCI->pci_device_vendor = zx1_pciids[i];
pPCI->pci_base_class = PCI_CLASS_BRIDGE;
pPCI->pci_sub_class = PCI_SUBCLASS_BRIDGE_PCI;
pPCI->pci_header_type = 1;
pPCI->pci_primary_bus_number = zx1_fakebus;
pPCI->pci_secondary_bus_number = zx1_busno[i];
pPCI->pci_subordinate_bus_number = zx1_subno[i];
pPCI->fakeDevice = TRUE;
pBusInfo->bridge = pPCI;
pBusInfo->secondary = TRUE;
pBusInfo->primary_bus = zx1_fakebus;
/* Plug in chipset routines */
pBusInfo->funcs = &zx1BusFuncs;
/* Set bridge control register for scanpci utility */
pPCI->pci_bridge_control = ControlZX1Bridge(zx1_busno[i], 0, 0);
#ifdef OLD_FORMAT
xf86MsgVerb(X_INFO, 2, "PCI: BusID 0x%.2x,0x%02x,0x%1x "
"ID 0x%04x,0x%04x Rev 0x%02x Class 0x%02x,0x%02x\n",
pPCI->busnum, pPCI->devnum, pPCI->funcnum,
pPCI->pci_vendor, pPCI->_pci_device, pPCI->pci_rev_id,
pPCI->pci_base_class, pPCI->pci_sub_class);
#else
xf86MsgVerb(X_INFO, 2, "PCI: %.2x:%02x:%1x: chip %04x,%04x"
" card %04x,%04x rev %02x class %02x,%02x,%02x hdr %02x\n",
pPCI->busnum, pPCI->devnum, pPCI->funcnum,
pPCI->pci_vendor, pPCI->_pci_device,
pPCI->pci_subsys_vendor, pPCI->pci_subsys_card,
pPCI->pci_rev_id, pPCI->pci_base_class,
pPCI->pci_sub_class, pPCI->pci_prog_if,
pPCI->pci_header_type);
#endif
}
*ppPCI = NULL; /* Terminate array */
}
Reference in New Issue View Git Blame Copy Permalink