xserver-multidpi/hw/kdrive/itsy/ts.c
Daniel Stone 02d0910511 new KDrive input world order
Convert KDrive to GPE/GKE interface.
Add first-class drivers and enumerate every device separately through
Xi, instead of lamely attempting to aggregate them.
Add XKB support to the Linux keyboard driver.
Add 'thumb button' support to the tslib driver.
Rejig InitInput, so each DDX has to add a list of drivers it supports.
Support NewInputDeviceRequest, et al.
2006-07-21 15:19:51 -04:00

214 lines
4.8 KiB
C

/*
* Id: ts.c,v 1.1 1999/11/02 18:39:28 keithp Exp $
*
* Copyright © 1999 Keith Packard
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation, and that the name of Keith Packard not be used in
* advertising or publicity pertaining to distribution of the software without
* specific, written prior permission. Keith Packard makes no
* representations about the suitability of this software for any purpose. It
* is provided "as is" without express or implied warranty.
*
* KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
/* $RCSId: xc/programs/Xserver/hw/kdrive/itsy/ts.c,v 1.1 1999/11/19 13:53:54 hohndel Exp $ */
#ifdef HAVE_CONFIG_H
#include <kdrive-config.h>
#endif
#define NEED_EVENTS
#include "itsy.h"
#include <X11/Xproto.h>
#include "inputstr.h"
#include "Xpoll.h"
int
itsyTsReadBytes (int fd, char *buf, int len, int min)
{
int n, tot;
fd_set set;
struct timeval tv;
tot = 0;
while (len)
{
n = read (fd, buf, len);
if (n > 0)
{
tot += n;
buf += n;
len -= n;
}
if (tot % min == 0)
break;
FD_ZERO (&set);
FD_SET (fd, &set);
tv.tv_sec = 0;
tv.tv_usec = 100 * 1000;
n = select (fd + 1, &set, 0, 0, &tv);
if (n <= 0)
break;
}
return tot;
}
void
itsyTsRead (KdPointerInfo *pi, int tsPort)
{
ts_event event;
long buf[3];
int n;
long pressure;
long x, y;
unsigned long flags;
unsigned long buttons;
n = itsyTsReadBytes (tsPort, (char *) &event,
sizeof (event), sizeof (event));
if (n == sizeof (event))
{
if (event.pressure)
{
flags = KD_BUTTON_1;
x = event.point.x;
y = event.point.y;
}
else
{
flags = KD_MOUSE_DELTA;
x = 0;
y = 0;
}
KdEnqueuePointerEvent (pi, flags, x, y, 0);
}
}
#if 0
#define ITSY_DEBUG_LOW 1
//
// Touch screen parameters are stored
// in the flash. This code is taken from 'wm1'.
//
void itsySetTouchCalibration (int mou_filedsc,
int xs, int xt, int ys, int yt, int xys)
{
int k, ibuf[10];
ibuf[0] = xs;
ibuf[1] = xt;
ibuf[2] = ys;
ibuf[3] = yt;
ibuf[4] = xys;
if ((k=ioctl(mou_filedsc, TS_SET_CALM, ibuf)) != 0) {
fprintf(stderr, "ERROR: ioctl TS_SET_CALM returns %d\n", k);
}
}
int itsyReadFlashBlock(int location, signed char *data, int dbytes)
{
int offset, bytes;
int flashfd;
flashfd = open("/dev/flash1", O_RDONLY);
if (flashfd < 0) return(0);
offset = lseek(flashfd, location, SEEK_SET);
if (offset != location) {
close(flashfd);
return(0);
}
bytes = read(flashfd, data, dbytes);
if (bytes != dbytes) {
close(flashfd);
return(0);
}
close(flashfd);
return(1);
}
/**********************************************************************/
#define RAMSIZE (0x400000)
#define MONITOR_BLOCKSIZE (32)
/**********************************************************************/
/* code for storing calibration into flash */
#define CALIBRATE_BLOCKSIZE (32)
#define CALIBRATE_OFFSET (RAMSIZE-MONITOR_BLOCKSIZE-CALIBRATE_BLOCKSIZE)
#define CALIBRATE_MAGIC_NUM (0x0babedee)
static int check_if_calibrated_and_set(int mou_filedsc)
{
signed char cal_data[CALIBRATE_BLOCKSIZE];
int *iptr;
if (itsyReadFlashBlock(CALIBRATE_OFFSET,
cal_data, CALIBRATE_BLOCKSIZE) == 0) {
if ( ITSY_DEBUG_LOW ) {
fprintf(stderr,"unable to read calibration data for touch screen\n");
}
return(0);
}
iptr = (int *) cal_data;
if (iptr[0] == CALIBRATE_MAGIC_NUM) {
if ( ITSY_DEBUG_LOW ) {
fprintf(stderr,"Calibrating touch screen using %d, %d, %d, %d, %d\n",
iptr[1], iptr[2], iptr[3], iptr[4], iptr[5]);
}
itsySetTouchCalibration(mou_filedsc, iptr[1], iptr[2], iptr[3], iptr[4], iptr[5]);
return(1);
}
else {
if ( ITSY_DEBUG_LOW ) {
fprintf(stderr,"Couldn't calibrate screen\n");
}
return(0);
}
}
#endif
int
itsyTsInit (void)
{
int tsPort;
tsPort = open ("/dev/ts", 0);
fprintf (stderr, "tsPort %d\n", tsPort);
#if 0
if (tsPort >= 0)
check_if_calibrated_and_set (tsPort);
#endif
return tsPort;
}
void
itsyTsFini (int tsPort)
{
if (tsPort >= 0)
close (tsPort);
}
KdPointerDriver itsyTsMouseDriver = {
"itsyts",
itsyTsInit,
itsyTsRead,
itsyTsFini
};