xserver-multidpi/exa/exa_unaccel.c
Eric Anholt e4d11e58ce Remove the PaintWindow optimization.
This was an attempt to avoid scratch gc creation and validation for paintwin
because that was expensive.  This is not the case in current servers, and the
danger of failure to implement it correctly (as seen in all previous
implementations) is high enough to justify removing it.  No performance
difference detected with x11perf -create -move -resize -circulate on Xvfb.
Leave the screen hooks for PaintWindow* in for now to avoid ABI change.
2007-09-13 00:08:53 +00:00

401 lines
12 KiB
C

/*
*
* Copyright © 1999 Keith Packard
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that
* copyright notice and this permission notice appear in supporting
* documentation, and that the name of Keith Packard not be used in
* advertising or publicity pertaining to distribution of the software without
* specific, written prior permission. Keith Packard makes no
* representations about the suitability of this software for any purpose. It
* is provided "as is" without express or implied warranty.
*
* KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
* PERFORMANCE OF THIS SOFTWARE.
*/
#include "exa_priv.h"
#ifdef RENDER
#include "mipict.h"
#endif
/*
* These functions wrap the low-level fb rendering functions and
* synchronize framebuffer/accelerated drawing by stalling until
* the accelerator is idle
*/
/**
* Calls exaPrepareAccess with EXA_PREPARE_SRC for the tile, if that is the
* current fill style.
*
* Solid doesn't use an extra pixmap source, and Stippled/OpaqueStippled are
* 1bpp and never in fb, so we don't worry about them.
* We should worry about them for completeness sake and going forward.
*/
void
exaPrepareAccessGC(GCPtr pGC)
{
if (pGC->stipple)
exaPrepareAccess(&pGC->stipple->drawable, EXA_PREPARE_MASK);
if (pGC->fillStyle == FillTiled)
exaPrepareAccess(&pGC->tile.pixmap->drawable, EXA_PREPARE_SRC);
}
/**
* Finishes access to the tile in the GC, if used.
*/
void
exaFinishAccessGC(GCPtr pGC)
{
if (pGC->fillStyle == FillTiled)
exaFinishAccess(&pGC->tile.pixmap->drawable, EXA_PREPARE_MASK);
if (pGC->stipple)
exaFinishAccess(&pGC->stipple->drawable, EXA_PREPARE_SRC);
}
#if DEBUG_TRACE_FALL
char
exaDrawableLocation(DrawablePtr pDrawable)
{
return exaDrawableIsOffscreen(pDrawable) ? 's' : 'm';
}
#endif /* DEBUG_TRACE_FALL */
void
ExaCheckFillSpans (DrawablePtr pDrawable, GCPtr pGC, int nspans,
DDXPointPtr ppt, int *pwidth, int fSorted)
{
EXA_FALLBACK(("to %p (%c)\n", pDrawable, exaDrawableLocation(pDrawable)));
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
exaPrepareAccessGC (pGC);
fbFillSpans (pDrawable, pGC, nspans, ppt, pwidth, fSorted);
exaFinishAccessGC (pGC);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
}
void
ExaCheckSetSpans (DrawablePtr pDrawable, GCPtr pGC, char *psrc,
DDXPointPtr ppt, int *pwidth, int nspans, int fSorted)
{
EXA_FALLBACK(("to %p (%c)\n", pDrawable, exaDrawableLocation(pDrawable)));
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
fbSetSpans (pDrawable, pGC, psrc, ppt, pwidth, nspans, fSorted);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
}
void
ExaCheckPutImage (DrawablePtr pDrawable, GCPtr pGC, int depth,
int x, int y, int w, int h, int leftPad, int format,
char *bits)
{
EXA_FALLBACK(("to %p (%c)\n", pDrawable, exaDrawableLocation(pDrawable)));
if (exaGCReadsDestination(pDrawable, pGC->planemask, pGC->fillStyle,
pGC->alu))
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
else
ExaDoPrepareAccess (pDrawable, EXA_PREPARE_DEST);
fbPutImage (pDrawable, pGC, depth, x, y, w, h, leftPad, format, bits);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
}
RegionPtr
ExaCheckCopyArea (DrawablePtr pSrc, DrawablePtr pDst, GCPtr pGC,
int srcx, int srcy, int w, int h, int dstx, int dsty)
{
RegionPtr ret;
EXA_FALLBACK(("from %p to %p (%c,%c)\n", pSrc, pDst,
exaDrawableLocation(pSrc), exaDrawableLocation(pDst)));
exaPrepareAccess (pDst, EXA_PREPARE_DEST);
exaPrepareAccess (pSrc, EXA_PREPARE_SRC);
ret = fbCopyArea (pSrc, pDst, pGC, srcx, srcy, w, h, dstx, dsty);
exaFinishAccess (pSrc, EXA_PREPARE_SRC);
exaFinishAccess (pDst, EXA_PREPARE_DEST);
return ret;
}
RegionPtr
ExaCheckCopyPlane (DrawablePtr pSrc, DrawablePtr pDst, GCPtr pGC,
int srcx, int srcy, int w, int h, int dstx, int dsty,
unsigned long bitPlane)
{
RegionPtr ret;
EXA_FALLBACK(("from %p to %p (%c,%c)\n", pSrc, pDst,
exaDrawableLocation(pSrc), exaDrawableLocation(pDst)));
exaPrepareAccess (pDst, EXA_PREPARE_DEST);
exaPrepareAccess (pSrc, EXA_PREPARE_SRC);
ret = fbCopyPlane (pSrc, pDst, pGC, srcx, srcy, w, h, dstx, dsty,
bitPlane);
exaFinishAccess (pSrc, EXA_PREPARE_SRC);
exaFinishAccess (pDst, EXA_PREPARE_DEST);
return ret;
}
void
ExaCheckPolyPoint (DrawablePtr pDrawable, GCPtr pGC, int mode, int npt,
DDXPointPtr pptInit)
{
EXA_FALLBACK(("to %p (%c)\n", pDrawable, exaDrawableLocation(pDrawable)));
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
fbPolyPoint (pDrawable, pGC, mode, npt, pptInit);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
}
void
ExaCheckPolylines (DrawablePtr pDrawable, GCPtr pGC,
int mode, int npt, DDXPointPtr ppt)
{
EXA_FALLBACK(("to %p (%c), width %d, mode %d, count %d\n",
pDrawable, exaDrawableLocation(pDrawable),
pGC->lineWidth, mode, npt));
if (pGC->lineWidth == 0) {
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
exaPrepareAccessGC (pGC);
fbPolyLine (pDrawable, pGC, mode, npt, ppt);
exaFinishAccessGC (pGC);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
return;
}
/* fb calls mi functions in the lineWidth != 0 case. */
fbPolyLine (pDrawable, pGC, mode, npt, ppt);
}
void
ExaCheckPolySegment (DrawablePtr pDrawable, GCPtr pGC,
int nsegInit, xSegment *pSegInit)
{
EXA_FALLBACK(("to %p (%c) width %d, count %d\n", pDrawable,
exaDrawableLocation(pDrawable), pGC->lineWidth, nsegInit));
if (pGC->lineWidth == 0) {
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
exaPrepareAccessGC (pGC);
fbPolySegment (pDrawable, pGC, nsegInit, pSegInit);
exaFinishAccessGC (pGC);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
return;
}
/* fb calls mi functions in the lineWidth != 0 case. */
fbPolySegment (pDrawable, pGC, nsegInit, pSegInit);
}
void
ExaCheckPolyArc (DrawablePtr pDrawable, GCPtr pGC,
int narcs, xArc *pArcs)
{
EXA_FALLBACK(("to %p (%c)\n", pDrawable, exaDrawableLocation(pDrawable)));
if (pGC->lineWidth == 0)
{
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
exaPrepareAccessGC (pGC);
fbPolyArc (pDrawable, pGC, narcs, pArcs);
exaFinishAccessGC (pGC);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
return;
}
miPolyArc (pDrawable, pGC, narcs, pArcs);
}
void
ExaCheckPolyFillRect (DrawablePtr pDrawable, GCPtr pGC,
int nrect, xRectangle *prect)
{
EXA_FALLBACK(("to %p (%c)\n", pDrawable, exaDrawableLocation(pDrawable)));
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
exaPrepareAccessGC (pGC);
fbPolyFillRect (pDrawable, pGC, nrect, prect);
exaFinishAccessGC (pGC);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
}
void
ExaCheckImageGlyphBlt (DrawablePtr pDrawable, GCPtr pGC,
int x, int y, unsigned int nglyph,
CharInfoPtr *ppci, pointer pglyphBase)
{
EXA_FALLBACK(("to %p (%c)\n", pDrawable,
exaDrawableLocation(pDrawable)));
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
exaPrepareAccessGC (pGC);
fbImageGlyphBlt (pDrawable, pGC, x, y, nglyph, ppci, pglyphBase);
exaFinishAccessGC (pGC);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
}
void
ExaCheckPolyGlyphBlt (DrawablePtr pDrawable, GCPtr pGC,
int x, int y, unsigned int nglyph,
CharInfoPtr *ppci, pointer pglyphBase)
{
EXA_FALLBACK(("to %p (%c), style %d alu %d\n", pDrawable,
exaDrawableLocation(pDrawable), pGC->fillStyle, pGC->alu));
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
exaPrepareAccessGC (pGC);
fbPolyGlyphBlt (pDrawable, pGC, x, y, nglyph, ppci, pglyphBase);
exaFinishAccessGC (pGC);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
}
void
ExaCheckPushPixels (GCPtr pGC, PixmapPtr pBitmap,
DrawablePtr pDrawable,
int w, int h, int x, int y)
{
EXA_FALLBACK(("from %p to %p (%c,%c)\n", pBitmap, pDrawable,
exaDrawableLocation(&pBitmap->drawable),
exaDrawableLocation(pDrawable)));
exaPrepareAccess (pDrawable, EXA_PREPARE_DEST);
exaPrepareAccessGC (pGC);
fbPushPixels (pGC, pBitmap, pDrawable, w, h, x, y);
exaFinishAccessGC (pGC);
exaFinishAccess (pDrawable, EXA_PREPARE_DEST);
}
void
ExaCheckGetSpans (DrawablePtr pDrawable,
int wMax,
DDXPointPtr ppt,
int *pwidth,
int nspans,
char *pdstStart)
{
EXA_FALLBACK(("from %p (%c)\n", pDrawable, exaDrawableLocation(pDrawable)));
exaPrepareAccess (pDrawable, EXA_PREPARE_SRC);
fbGetSpans (pDrawable, wMax, ppt, pwidth, nspans, pdstStart);
exaFinishAccess (pDrawable, EXA_PREPARE_SRC);
}
void
ExaCheckComposite (CARD8 op,
PicturePtr pSrc,
PicturePtr pMask,
PicturePtr pDst,
INT16 xSrc,
INT16 ySrc,
INT16 xMask,
INT16 yMask,
INT16 xDst,
INT16 yDst,
CARD16 width,
CARD16 height)
{
RegionRec region;
int xoff, yoff;
REGION_NULL(pScreen, &region);
if (!exaOpReadsDestination(op)) {
if (!miComputeCompositeRegion (&region, pSrc, pMask, pDst,
xSrc, ySrc, xMask, yMask, xDst, yDst,
width, height))
return;
exaGetDrawableDeltas (pDst->pDrawable,
exaGetDrawablePixmap(pDst->pDrawable),
&xoff, &yoff);
REGION_TRANSLATE(pScreen, &region, xoff, yoff);
exaPrepareAccessReg (pDst->pDrawable, EXA_PREPARE_DEST, &region);
} else
exaPrepareAccess (pDst->pDrawable, EXA_PREPARE_DEST);
EXA_FALLBACK(("from picts %p/%p to pict %p\n",
pSrc, pMask, pDst));
if (pSrc->pDrawable != NULL)
exaPrepareAccess (pSrc->pDrawable, EXA_PREPARE_SRC);
if (pMask && pMask->pDrawable != NULL)
exaPrepareAccess (pMask->pDrawable, EXA_PREPARE_MASK);
fbComposite (op,
pSrc,
pMask,
pDst,
xSrc,
ySrc,
xMask,
yMask,
xDst,
yDst,
width,
height);
if (pMask && pMask->pDrawable != NULL)
exaFinishAccess (pMask->pDrawable, EXA_PREPARE_MASK);
if (pSrc->pDrawable != NULL)
exaFinishAccess (pSrc->pDrawable, EXA_PREPARE_SRC);
exaFinishAccess (pDst->pDrawable, EXA_PREPARE_DEST);
REGION_UNINIT(pScreen, &region);
}
/**
* Gets the 0,0 pixel of a pixmap. Used for doing solid fills of tiled pixmaps
* that happen to be 1x1. Pixmap must be at least 8bpp.
*
* XXX This really belongs in fb, so it can be aware of tiling and etc.
*/
CARD32
exaGetPixmapFirstPixel (PixmapPtr pPixmap)
{
CARD32 pixel;
void *fb;
Bool need_finish = FALSE;
BoxRec box;
RegionRec migration;
ExaPixmapPriv (pPixmap);
Bool sys_valid = !miPointInRegion(&pExaPixmap->validSys, 0, 0, &box);
Bool damaged = miPointInRegion(DamageRegion(pExaPixmap->pDamage), 0, 0,
&box);
Bool offscreen = exaPixmapIsOffscreen(pPixmap);
fb = pExaPixmap->sys_ptr;
/* Try to avoid framebuffer readbacks */
if ((!offscreen && !sys_valid && !damaged) ||
(offscreen && (!sys_valid || damaged)))
{
box.x1 = 0;
box.y1 = 0;
box.x2 = 1;
box.y2 = 1;
REGION_INIT(pScreen, &migration, &box, 1);
need_finish = TRUE;
exaPrepareAccessReg(&pPixmap->drawable, EXA_PREPARE_SRC, &migration);
fb = pPixmap->devPrivate.ptr;
}
switch (pPixmap->drawable.bitsPerPixel) {
case 32:
pixel = *(CARD32 *)fb;
break;
case 16:
pixel = *(CARD16 *)fb;
break;
default:
pixel = *(CARD8 *)fb;
break;
}
if (need_finish) {
exaFinishAccess(&pPixmap->drawable, EXA_PREPARE_SRC);
REGION_UNINIT(pScreen, &migration);
}
return pixel;
}