MarcoBuster/Gadgetbridge
1
0
Fork 0
mirror of https://codeberg.org/Freeyourgadget/Gadgetbridge synced 2024-11-16 06:59:29 +01:00
Code Releases Wiki Activity
738 Commits 86 Branches 232 Tags 89 MiB
18f952250a
Commit Graph

665 Commits

Author SHA1 Message Date
Andreas Shimokawa
6e80978998 Pebble: Add generic method for Blobdb endpoint for deduplicating code. 2015-08-21 14:29:12 +02:00
Andreas Shimokawa
2b0acd649b Pebble: close TCP socket when disconnecting from emulator. Prevents hang. 2015-08-21 13:19:46 +02:00
Daniele Gobbetti
eb39ce9367 Further improvements: 
- append a string on the control center when the device is charging
- battery status string is no more, welcome battery state enum
- the notification will not be shown when the device is charging, even if the level is below threshold
 2015-08-21 08:41:57 +02:00
cpfeiffer
a1cb246e27 Add and use a "client interface" for the actions of the service 
Previously, the DeviceCommunicationService was invoked directly,
via
Intent intent = new Intent(foo, bar);
intent.setExtra(EXTRA_BAZ, baz);
startService(...);

and this was scattered throughout GadgetBridge.
Now there is a "frontend" available, so that you can call
the service more easily, like
GBApplication.deviceService().connect();

For a start, this client interface (DeviceService) actually
implements the same interface (EventHandler) as the receiving side
(DeviceSupport). This may change in the future.

This will also make testing much easier, because we can use
this client interface to invoke the test service as well.
 2015-08-21 01:03:57 +02:00
Andreas Shimokawa
ff6d28cdc8 Remove INTERNET permission 
Accidentially commited my local change to make the emulator connection work.
(Yes I know I had been warned)
 2015-08-20 22:41:38 +02:00
Andreas Shimokawa
faaa04b670 App Installation: various improvements 
- make FwAppInstallerActivity wait for a completely initialized device
- check basalt/aplite compatibility with pbw to be installed and report intead of crashing
- fix crash when trying to install pbw with all app slots full
 2015-08-20 18:55:22 +02:00
Daniele Gobbetti
0d8adeb7f9 Some refinements: 
- only show the bigtext notification if the device has set extended battery info
- custom icon for the low battery notification (with license information)
- show device name in the notification
- set the notification to high priority
- the battery threshold is now set in GBDevice
 2015-08-19 17:36:53 +02:00
Daniele Gobbetti
57a85e63b0 Merge remote-tracking branch 'origin/master' into low_battery_notification 2015-08-19 17:30:33 +02:00
Andreas Shimokawa
d2173d37ce forgot to commit this also 2015-08-19 01:46:18 +02:00
Andreas Shimokawa
e8e631fb49 Pebble: encode flags in metadata, this could not work on real devices 2015-08-19 01:42:13 +02:00
cpfeiffer
5a4f8fb56f Last commit accidentally called the wrong get*Samples method 2015-08-19 01:06:46 +02:00
Andreas Shimokawa
a7796ecbc6 Pebble: Emulator support 
NOTE:
- supports aplite and basalt emulator
- needs recompilation of Gadgetbridge with INTERNET permission

TODO:
- fix disconnect issues
- emulator special packet support
- string localization
- ...
 2015-08-19 00:06:15 +02:00
Daniele Gobbetti
c3e395818f Adding support for battery events using GBDeviceEvent. 
- show notification on low battery (closes #40)
- Miband specific: add date of last charge and number of charges
 2015-08-18 17:37:51 +02:00
cpfeiffer
121baa19ec Move AbstractSerialDeviceSupport et al from bt package into serial package 2015-08-18 01:26:15 +02:00
cpfeiffer
99293d4ee5 Also extracted firmware update to separate operation 2015-08-18 00:52:02 +02:00
cpfeiffer
dbb92b55bc Make the Operations classes BLE-generic 2015-08-18 00:31:40 +02:00
Andreas Shimokawa
c0323339e8 Pebble: set UTC time and offset on FW 3.x 2015-08-18 00:13:55 +02:00
cpfeiffer
33b598ce5c First part of extracting parts out of MiBandSupport 
Extract Activity Data fetching into distinct 'operation' class.

Fix a few small things wrt transaction-local GattCallbacks along the way.
 2015-08-18 00:11:53 +02:00
cpfeiffer
585a888ecb Improved javadoc 2015-08-18 00:11:51 +02:00
Andreas Shimokawa
0c872a920e Pebble: always set token to -1 before waiting for a new one 
This could fix potential problems with app installation
 2015-08-17 22:50:46 +02:00
cpfeiffer
e6a0c35f73 Extract checksum implementations into separate class CheckSums 2015-08-17 22:43:42 +02:00
cpfeiffer
9dc945a406 Don't throttle events for Pebble 
And actually do busy-filtering for Mi and Pebble
 2015-08-17 21:30:37 +02:00
Andreas Shimokawa
6fede31bdf Pebble: make watchapp installation available on FW 3.x without the need for setting an option 2015-08-17 18:07:47 +02:00
cpfeiffer
9dd2f039f2 Rename AbstractBTDeviceSupport to AbstractSerialDeviceSupport 
That way it also fits devices connected via TCP/IP for example.
 2015-08-17 16:30:12 +02:00
Andreas Shimokawa
8fee88a1ba Pebble: use SMS/EMAIL icons for notifications on FW 3.X 2015-08-17 13:57:01 +02:00
Andreas Shimokawa
e704357728 Pebble: set HW revision to "dvt" for basalt emulator 2015-08-17 13:19:15 +02:00
Andreas Shimokawa
c8c882c3d1 Pebble: Support removing apps on FW 3.X (metadata) 2015-08-17 13:07:34 +02:00
Andreas Shimokawa
f0924716fc Pebble: when reading app fetch uuid, do not switch to little endian too early 2015-08-17 12:55:17 +02:00
Andreas Shimokawa
0d0b3a87e1 Pebble: on FW 3.x always assume success for installation and do no wait for 2.x packets 2015-08-17 12:43:38 +02:00
cpfeiffer
bcf42f8022 Finally, the prev and next buttons do something (#79) 
Far from perfect, but a start.
 2015-08-17 02:22:16 +02:00
cpfeiffer
964994972b Fix for pebble sample provider switching without quitting gb) 2015-08-16 23:30:16 +02:00
cpfeiffer
27a9eb8a07 Only repaint chart when activity is still alive 
(fixes error message when synchronizing in the charts activity and then
switching orientation)
 2015-08-16 23:27:18 +02:00
cpfeiffer
0bd65e050c Make intensity also always positive #91 
I never experienced such values, but others apparently do...
 2015-08-16 23:18:32 +02:00
Andreas Shimokawa
48f5931043 PebbleProtocol: add missing assignment 2015-08-16 13:13:53 +02:00
Andreas Shimokawa
6af0bb2754 Pebble: Do not hardcode icon id for metadata installation, properly acknowledge app fetch requests 2015-08-16 11:33:32 +02:00
Andreas Shimokawa
a4f5524f6e Pebble: blindly implement missing parts for app installation on FW 3.x 
This is expected to fail and needs to be enable in preferences (untested features).
 2015-08-16 00:32:36 +02:00
cpfeiffer
567f27b0f4 Some initial fixes found by static analysis #92 2015-08-16 00:17:16 +02:00
cpfeiffer
3486b5ab69 Static code analysis: run findbugs, pmd and lint at 'gradle check' #92 
As a start, the build won't abort on any serious errors.
 2015-08-15 23:02:38 +02:00
Andreas Shimokawa
a2e2600469 Bump version to 0.4.6 2015-08-15 22:41:29 +02:00
Andreas Shimokawa
c69bf1b0af Pebble: always use 2.x notification on FW 2.x except for K9 
FW 2.x notifications enables the "dismiss all" action, but for K9 we would loose
the mail icon. So K9 still needs the force option.
 2015-08-15 22:38:10 +02:00
cpfeiffer
b6f66eb57c Updated translations from transifex, thanks! 2015-08-15 11:42:33 +02:00
cpfeiffer
a66a3a15c2 Fix remaining byte parameter in the API for steps. 
Maybe this was the reason for #91 (negative steps)

This could happen making at least 3 steps per second.
 2015-08-15 00:23:13 +02:00
cpfeiffer
ecc483f027 Remove now unused class 2015-08-14 23:50:21 +02:00
cpfeiffer
d0229847e7 onFirmwareVersionReq() is no more 
- version information is now provided implicitly by device initialization
- ACTION_REQUEST_VERSIONINFO is now ACTION_REQUEST_DEVICEINFO and it will
  return the current device state of the service without asking any DeviceSupport
  instance.
- ACTION_CONNECT now implicitly answers with a device update intent if it
  IS already connected.
 2015-08-14 23:37:47 +02:00
Andreas Shimokawa
f659e34efc Pebble: do not use platform dir for pbz(firmware) files, even basalt has its files in / for fw files 2015-08-14 17:32:06 +02:00
Andreas Shimokawa
f5fbb08696 Pebble: remove unneccessary device update intent (this is done in generic code) 2015-08-14 13:46:37 +02:00
Andreas Shimokawa
e28d6fa7cb Pebble: try to install app metadata on FW 3.x (untested) 2015-08-14 12:51:30 +02:00
cpfeiffer
2e3de0cd0f Always send out the current state of GBDevice when asking for version 
In a second step, request the version from the device (and send updated
values then)

RequestVersionInfo is either a misnomer or misused, depending on your view.
It is actually used by activities to get the current state of thde device.

We now provide this as quickly as possible, with the drawback of sometimes
sending results twice.
 2015-08-14 00:29:05 +02:00
cpfeiffer
eec7fae288 Attempting to fix some connection problems after getting disconnected 2015-08-14 00:23:01 +02:00
cpfeiffer
eb2332c8be Some preparations for unit tests 2015-08-13 23:23:40 +02:00
Andreas Shimokawa
749fbe5ecc Pebble: fix crash with emply pbw cache 2015-08-13 10:06:32 +02:00
Andreas Shimokawa
6ed54484a6 Pebble: only fill app list in AppManager with cached apps once in onCreate() 
This is important for FW 3.x testing, since the REFRESH intent
will never arrive and we want to see cached watchapps
 2015-08-11 14:16:08 +02:00
Andreas Shimokawa
e43fed2e7e Pebble: various preparations for FW 3.x support 
- Implement encodeAppStart() for FW 3.x
- List cached PBWs in AppManager (currently only UUID)
 2015-08-11 13:55:35 +02:00
Andreas Shimokawa
13260416f3 Pebble: decode app fetch requests for debugging purposes 2015-08-11 13:21:29 +02:00
Andreas Shimokawa
151f5b8e12 Pebble: Choose binaries from basalt/ inside .pbw files for Pebble Time 
PBW installation is still unsupported on FW 3.x, these are just preparations
 2015-08-11 12:47:23 +02:00
Andreas Shimokawa
5a8c9a9180 Pebble: cache installed pbw files on sdcard if force untested option is set 
This will be needed for FW 3.x on demand installations.
 2015-08-11 12:04:45 +02:00
Andreas Shimokawa
0be251e83d Pebble: if untested features option is enabled use Gadgetbridge sample provider insted of Morpheuz 2015-08-11 11:21:10 +02:00
Andreas Shimokawa
5884684cad Pebble: add option to enable untested features. 
Bad things incoming ;)
 2015-08-11 11:15:44 +02:00
Daniele Gobbetti
7bf45d9b9f Merge branch 'master' of https://github.com/Freeyourgadget/Gadgetbridge 2015-08-10 11:24:51 +02:00
Daniele Gobbetti
b6d3317b2d First step for GBDeviceEvents support: 
- change fw handling to GBDeviceEvent
- misuse the hw version for showing the MiBand device name (there is still no option to set a custom name)
 2015-08-10 10:35:55 +02:00
Daniele Gobbetti
fd5a620091 re-add support for NO_RESPONSE write characteristic 2015-08-10 09:20:06 +02:00
Andreas Shimokawa
d983d7a5c4 Pebble: answer pings from the watch 2015-08-09 21:42:27 +02:00
Andreas Shimokawa
27f88e484d Make ControlCenter only ask for version details after device is initialized 
This allows removal of a workaround which allowed ACTION_REQUEST_VERSIONINFO
to be used in connected state (instead of initialized state)
 2015-08-07 22:07:48 +02:00
Daniele Gobbetti
fe11e6d306 Some BTLE cleanup: 
- the BASE_UUID is shared between all BTLE devices, not miband specific. So are the UUID DESCRIPTORS. Hence these have been moved to AbstractBTLEDeviceSupport
- the gatt-characteristic-property-constants used previously in MiBandNotifyAction are also general, and exposed by the gatt subsystem, hence the specific action has been dropped moving the logic to the NotifyAction class
 - the logic for checking the gatt-characteristic-property-constants has been extended also to the ReadAction and WriteAction class, this way we won't try to read (or write)  a characteristic that isn't readable (or writeable)
 2015-08-07 16:59:52 +02:00
Andreas Shimokawa
6125594703 Various changes related to INITIALZED device state 
Due to a bug in DeviceCommunicationService.isConnected(), devices using the
INITIALIZED state only worked when they had useAutoConnect set to true (Mi Band)

Now setting devices to INITIALIZED state to allow any action send to
DeviceCommunicationService is mandatory. As an exception only
REQUEST_VERSIONINFO will be also be allowed for CONNECTED state.

This also fixes a problem when notifications came in on the Pebble with 3.x
FW before we actually knew it was FW 3.x (INITZALIZED state on the Pebble
now implies that we know the FW version)
 2015-08-07 13:24:54 +02:00
Andreas Shimokawa
ce7b42d9d4 Some theme cleanups and preparations for a dark theme 2015-08-07 11:49:25 +02:00
cpfeiffer
9004a8b0c1 Experimental: ACTION_START is now optional -- ACTION_CONNECT is sufficient 2015-08-06 23:17:41 +02:00
cpfeiffer
f4cb798977 Extract a method for easier reuse if necessary 2015-08-06 22:24:44 +02:00
cpfeiffer
64298fc9af Small improvements for the install activity #30 
Now starts the service if not already running
 2015-08-06 21:35:00 +02:00
cpfeiffer
2a2eae068a Improvements to the install activity #30 
- made it independent of Mi fw and Pebble fw + app classes
- automatically connect to the last used device
- some other small fixes/improvements
 2015-08-06 02:17:38 +02:00
cpfeiffer
8dee55198e Don't (always) leak the file descriptor. 
It's still very much possible to leak the descriptor (when an exception occurs
somewhere in between or anything else goes wrong). So maybe the whole thing
should be redesigned to be independent of files.
 2015-08-06 00:45:07 +02:00
cpfeiffer
b7223c7e86 Initial support for transaction-local GattCallbacks (not used yet) 
So that we won't have to mix everything in MiBandSupport
 2015-08-05 23:26:09 +02:00
Daniele Gobbetti
495a8cc650 Reorder the lines in the MiBandService class. 
No functional changes, just clarity enhanchement.
 2015-08-05 17:32:02 +02:00
Daniele Gobbetti
65fc6f6866 Adapt the Firmware installer activity to the new FirmwareHelper 2015-08-05 17:31:11 +02:00
cpfeiffer
e92c9dbbb5 Better check for fw version major (#30) 2015-08-04 23:08:40 +02:00
cpfeiffer
910d9ef398 Make firmware reading a bit more failsafe #30 2015-08-04 23:02:36 +02:00
cpfeiffer
bdc9e70e6e Attempt to fix reconnection problems after being away from the Mi Band 
*untested*
 2015-08-04 22:03:10 +02:00
cpfeiffer
c407ed1a76 Last refactoring for now: BluetoothCommunicationService 
- rename to DeviceCommunicationService
- move all bluetooth related bits into separate DeviceSupportFactory
  class
 2015-08-04 01:01:14 +02:00
cpfeiffer
db4261e02b More refactoring: new service/devices package and service/bt package 2015-08-03 23:51:53 +02:00
cpfeiffer
7c597b325a Big refactoring: move classes and packages around to get a better structure 
- model package contains mostly shared interfaces (UI+service), not named GB*
- impl package contains implementations of those interfaces, named GB*
  the impl classes should not be used by the service (not completely done)
- the service classes should mostly use classes inside the service and deviceevents
  packages (tbd)

Every device now has two packages:
- devices/[device name] for UI related functionality
- service[device name] for lowlevel communication
 2015-08-03 23:09:49 +02:00
Daniele Gobbetti
afc4c9efaa Added some javadocs 2015-08-03 18:35:58 +02:00
Daniele Gobbetti
c798cd00fe Prevent tearing of the barchart values over other graph elements 2015-08-03 18:34:58 +02:00
Andreas Shimokawa
94b9736a5d actually bump version 2015-08-03 09:15:32 +02:00
cpfeiffer
e9f693942a Updated translations from transifex (thanks!) 2015-08-03 01:29:06 +02:00
cpfeiffer
802f48011d Refactoring of database access 
- the db is now exclusively locked for one thread
- the charts read from the db and analyze data in a background thread

+ some small cleanups
 2015-08-03 01:21:44 +02:00
cpfeiffer
9ca595a5cb Some javadocs 2015-08-02 00:12:21 +02:00
Daniele Gobbetti
46ee5a5499 Send the wear location (left hand / right hand) to the MiBand. 2015-07-31 16:19:32 +02:00
Daniele Gobbetti
69ddead8fb Reorder the COMMAND_ constants so that they are in numerical order 2015-07-31 16:19:03 +02:00
Daniele Gobbetti
5b3510fade Update the firmware-update notification based on the feedback we get from the band. 2015-07-31 16:18:09 +02:00
Daniele Gobbetti
2208d5088b Remove the timeout and handle the messages that the band sends back to acknowledge its status. 
This should make the firmware transfer much more reliable and hopefully release-ready.
 2015-07-31 12:30:42 +02:00
Daniele Gobbetti
fbbc2afda4 Add a timeout of 1 second before rebooting after firmware update. 2015-07-31 11:28:03 +02:00
Daniele Gobbetti
0a6dc8f7a0 Double the filter sections for opening pebble apps/firmwares and miband firmwares 
There are some inconsistencies across ROMs: some need the mimetype filter to be present in order to match the file extension, other refuse to do so if the filter is present. Current strategy is to satisfy both requirements by duplicating the filter element.
 2015-07-30 17:14:44 +02:00
Andreas Shimokawa
0eeb5a6479 PebbleGadgetBridgeSampleProvider: properly override getID() 2015-07-29 23:28:10 +02:00
Daniele Gobbetti
878afd79df Allow the user to set the target number of steps for each day (fitness goal), both in the sharedpreferences and in the MiBand. 
The value is then used in the graphs.

#31 #44
 2015-07-29 18:49:16 +02:00
Daniele Gobbetti
27669761bf Fix potential race condition when counted steps are above the daily target. 
Also added a few comments wrt the labels and the values of the pie chart.
 2015-07-29 18:07:35 +02:00
Daniele Gobbetti
c05cfc775e New chart showing the steps done today and in the last week. 
#31 #44
 2015-07-29 16:30:19 +02:00
Andreas Shimokawa
f51ffcf16f Use animated upload icon for installation progress notification 
Also fix a bug which caused the main gadgetbridge service notification to be reused for the installation notification
 2015-07-28 23:10:21 +02:00
Daniele Gobbetti
1bef702485 Send the progress updates from the actual BT transfer, which is where most of the time is spent. 2015-07-28 22:38:52 +02:00
Daniele Gobbetti
23f752dc20 New firmware tested. 2015-07-28 22:03:53 +02:00
Daniele Gobbetti
14f754306d Use a single queue for the whole firmware transfer. 
At the moment the progress bar code is not useful because the FW preparation is almost instantly done, and is the BT transfer that takes time.

The transfer happens when the getQueue method is called, and there is no progress info that I can find.
 2015-07-28 19:15:25 +02:00
Andreas Shimokawa
732f26823b move installer progressbar from PebbleIoThread to GB and use that for Mi Band fw installation 2015-07-28 18:44:54 +02:00
Andreas Shimokawa
9f591ef8b5 Refactoring: Merge Pebble app/fw installer activity and Miband firmware update Activity 2015-07-28 17:30:20 +02:00
Andreas Shimokawa
c3853c7735 Merge remote-tracking branch 'origin/firmware_update' 2015-07-28 16:21:57 +02:00
cpfeiffer
858c962dd0 Refactoring #45 
- add some device and db independent model interfaces for activity samples
- use these model interfaces where possible
- chart activity does not do device dependent rendering anymore and uses
  normalized values for all devices
- initial interface for daily summaries
 2015-07-28 00:05:05 +02:00
Andreas Shimokawa
91b8d7789d Pebble: improvemnts for upcoming Gadgetbridge Pebble watchapp 2015-07-27 23:21:06 +02:00
Andreas Shimokawa
dbbcf20bbc reformat code 2015-07-25 21:52:52 +02:00
Daniele Gobbetti
47cbf68c37 Merge remote-tracking branch 'upstream/master' into firmware_update 2015-07-25 21:36:46 +02:00
Daniele Gobbetti
8f840df5f6 Set GB notification visibility to public. 
This way on android 5 the status of the connection is shown also on the lockscreen even if the user chose to hide sensible content of the notifications.
 2015-07-25 21:14:18 +02:00
cpfeiffer
716bbc7b78 Avoid NPE when fetching activity data: 
java.lang.NullPointerException: Attempt to write to field 'int nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport$ActivityStruct.activityDataHolderProgress' on a null object reference
        at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.flushActivityDataHolder(MiBandSupport.java:748)
        at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.handleActivityNotif(MiBandSupport.java:689)
        at nodomain.freeyourgadget.gadgetbridge.miband.MiBandSupport.onCharacteristicChanged(MiBandSupport.java:583)
        at nodomain.freeyourgadget.gadgetbridge.btle.BtLEQueue$2.onCharacteristicChanged(BtLEQueue.java:369)
 2015-07-25 00:09:24 +02:00
cpfeiffer
a1f60aab91 Fix logging configuration 
Make sure to not invoke any logging before it is properly configured.
 2015-07-25 00:09:24 +02:00
Andreas Shimokawa
49cc4ec9d6 Pebble: for 3.x notification, do not zero parent UUID 
instead reuse the same reandom UUID again.
 2015-07-24 09:33:20 +02:00
Andreas Shimokawa
91cc19befe Pebble: spoof a newer application version (3.x) 2015-07-24 01:34:50 +02:00
Daniele Gobbetti
f16a96e9b2 Initial support for upgrading firmware of the MiBand. 
This release seems to be working quite well with respect to the firmware upgrading itself. The user facing part needs more work.

In order to update the firmware one has to:
- open a file ending with .fw
- switch from the firmware upgrade activity to the main one
- connect to the miband
- return to the firmware upgrade activity
- press the "install" button (that became active when the device connection was established)

Caveats:
There are almost no check wrt. the integrity of the firmware files.
 2015-07-23 17:14:51 +02:00
Andreas Shimokawa
844d929748 update remaining languages from transifex 
Please fix the removed strings on transifex. Some of them might have been removed because the original english string has been changed.
 2015-07-23 16:00:36 +02:00
Andreas Shimokawa
69f4b11594 update Korean translation from transifex 2015-07-23 15:56:47 +02:00
Andreas Shimokawa
268e658e6f rename ACTION_INSTALL_PEBBLEAPP to ACTION_INSTALL 2015-07-23 12:09:01 +02:00
Andreas Shimokawa
5c26b2281f Pebble: try to support notification dismissal on the Pebble Time (completely untested) 2015-07-22 20:53:18 +02:00
Andreas Shimokawa
80e93aeaf7 update CHANGELOG, bump version to 0.4.4 (not yet release time) 2015-07-21 22:55:26 +02:00
cpfeiffer
34dde2eb64 Eek 2015-07-21 22:30:11 +02:00
cpfeiffer
383a300566 Remove superfluous field 2015-07-21 22:29:29 +02:00
cpfeiffer
76fcbfcb52 Move activity data values into a separate struct (#45) 
- saves some memory
- allows us to show the toast for the first chunk only
 2015-07-21 22:27:15 +02:00
Andreas Shimokawa
b3a04f7afb Pebble: more length calculation fixes for 3.x notifications with actions 2015-07-21 22:05:25 +02:00
Andreas Shimokawa
6c1e41b4ec Pebble: fix some totaly obvious length calculation errors for actionable 3.x notifications 2015-07-21 21:56:11 +02:00
cpfeiffer
3662f32dbf Remove duplicated constants 2015-07-21 21:42:04 +02:00
cpfeiffer
3590c7c853 Remove inadvertently re-added busy-state handling 2015-07-21 21:40:06 +02:00
Andreas Shimokawa
3c35f94a7e Pebble: enable dismiss action on FW 3.x if force option is set 
NOTES:
- Might break notifications altogehter (can't test)
- Cannot work because we do not interpret the response yet.
 2015-07-21 21:32:05 +02:00
cpfeiffer
1f2b0329c5 Misc improvelets (#45) 2015-07-21 21:24:35 +02:00
Andreas Shimokawa
c9ab10e7e8 Pebble: commit missing PebbleProtocol changes for experimental notification dismissal 2015-07-21 01:33:13 +02:00
Andreas Shimokawa
74e1598bf7 Pebble: add experimental and incomplete support for dismissing 2.x notifications 
Currently this dismisses all notifications on the Phone-
 2015-07-21 01:27:05 +02:00
cpfeiffer
0f6491a11d More WIP: sync from the charts activity 
Also add preliminary buttons to go forward/backward in time.
 2015-07-21 00:06:20 +02:00
cpfeiffer
13d2c2166c Let DeviceCoordinator decide which activity to launch on click 2015-07-20 23:57:01 +02:00
cpfeiffer
184e0f2dea New dependency to format durations (and use that where applicable) 2015-07-20 23:14:08 +02:00
cpfeiffer
4aa80c149c Add some code to set the Mi Band latency 2015-07-20 21:43:23 +02:00
cpfeiffer
5d121e6e8f Fix a pointer aliasing issue, add some constants, remove invalid "checkpointing" 2015-07-20 21:41:18 +02:00
Daniele Gobbetti
d967411d70 Add a toast to let the user know about the progress of the transfer. 2015-07-19 16:16:58 +02:00
Daniele Gobbetti
6953086c99 Allow setting alarms once for the next day. 
(cherry picked from commit 417ea02)
 2015-07-19 15:58:30 +02:00
Daniele Gobbetti
7f7cea75c1 Spare some complexity by letting the writer change the status to non-busy. 
Before the code looked for the values written to the device with another method.
 2015-07-19 15:52:27 +02:00
Andreas Shimokawa
f847d834af Pebble: always force 3.x notifications on FW 3.x 2015-07-19 00:26:43 +02:00
Andreas Shimokawa
e6bc406d98 Fix funny typo :D 
Thanks to @girlwithnoname for spotting
 2015-07-18 23:38:59 +02:00
Andreas Shimokawa
095c70d469 Pebble: preparations for WIP Gadgetbridge Pebble App 2015-07-15 00:33:44 +02:00
cpfeiffer
d498bd976a Work in progress #45 
Comparison between Light Sleep and Deep Sleep.
(Currently wrong, needs more analysis)
 2015-07-14 00:29:32 +02:00
cpfeiffer
b1e2671bec limit maximum intensity to 180 for now... maybe make this configurable #45 2015-07-13 21:55:52 +02:00
cpfeiffer
04e628b2d1 Separate fragments for all activity kinds and just sleep #45 2015-07-13 21:54:46 +02:00
cpfeiffer
8b44f90bb6 Some more refactorings to support different charts 2015-07-12 23:42:23 +02:00
cpfeiffer
f53a037d7f Use query instead of rawQuery 2015-07-12 21:50:09 +02:00
cpfeiffer
623e4724c2 Slightly better text when no data available 2015-07-12 21:48:48 +02:00
Andreas Shimokawa
47c43e9c28 Debug Activity: Fix layout for small screens and landscape mode 
Fixes #84
 2015-07-12 20:06:47 +02:00
cpfeiffer
6553558947 Experimental code for an activity sync problem. Commented out for now. #45 
@daniele do you have an idea what this byte equence on the control point
characteristic could mean (and why the transfer stops then)?
 2015-07-12 00:02:51 +02:00
cpfeiffer
b516ceda01 Support for displaying Toasts from non-ui threads 2015-07-11 21:49:51 +02:00
cpfeiffer
be45f7fe0c check if table exists before dropping 2015-07-11 21:16:07 +02:00
cpfeiffer
a6e26e5ddc Cleanup, use fragment based charts (WIP #45) 
Known issue: scrolling a zoomed-in chart interferes with swiping to the
next/previous chart (so far there's just one, but...)
Workaround: Swipe down and then left or right in one go, this will let
you scroll the zoomed chart
 2015-07-11 00:03:41 +02:00
cpfeiffer
7c61bbb2be Logging to find the cause for seldom device state/notification mismatch 2015-07-10 21:35:28 +02:00
cpfeiffer
40be935abd Better time format for action logging 2015-07-10 21:02:03 +02:00
cpfeiffer
8b54c6e5c4 New incremental, cumulative database upgrades and downgrades 2015-07-10 00:31:45 +02:00
cpfeiffer
cc549a6c49 Basic database import and export (to external storage) 
(In the Debug Activity)
 2015-07-08 23:11:23 +02:00
Andreas Shimokawa
cdd26a43d2 Do not allow alarm to start alarm activity from a long press on a Pebble 2015-07-05 00:41:06 +02:00
Andreas Shimokawa
0ca375b87b update CHANGELOG, bump version 2015-07-05 00:27:48 +02:00
Andreas Shimokawa
33d785f67c update translations from transifex 2015-07-05 00:21:13 +02:00
cpfeiffer
f36caafc54 Fixed syncing activity data (#45) 
Bytes 1-6 represent the date/time, so we should not try to check for this.
Thanks a lot, Daniele!
 2015-07-04 22:22:59 +02:00
cpfeiffer
580b86f41b Add creation timestamps to BtLEActions and transactions in debug output 
(I think I still sometimes get "old" notifications)
 2015-07-03 21:58:13 +02:00
cpfeiffer
410b29dd6d Updated translations from transifex 2015-07-01 23:26:05 +02:00
Andreas Shimokawa
dfea2cbcc1 fix find device which started alarm activity 2015-06-30 21:18:27 +02:00
Andreas Shimokawa
b25d771ee9 reformat code 2015-06-30 12:09:29 +02:00
Andreas Shimokawa
594bf8c45b Merge pull request #81 from Freeyourgadget/set-alarm-tomerge 
Set alarms on device (miband)
 2015-06-30 09:43:51 +02:00
Daniele Gobbetti
3068d687bf Adressed some of the observations made re the last commits. 2015-06-30 06:40:46 +02:00
Daniele Gobbetti
371a7bb4af Get rid of the Checkedtextview because they weren't in line with the our style 2015-06-30 06:40:46 +02:00
Daniele Gobbetti
900511760c further improvements: 
- the day of week are evenly spread across the screen in the alarms detail activity
- the alarms are stored in a single shared preference (as a set) NB: you'll have to reset your alarms if you used a previous version (and also manually clean the shared preferences, but this is not needed)
- the list of alarms gets correctly updated after editing a specific alarm
- the actionbar back button saves the alarm status, the device back button doesn't. I'm not sure if it's a bug or a feature :)
 2015-06-30 06:40:46 +02:00
Daniele Gobbetti
109b2bef4d add a Toast to confirm the transfer of the alarm or to warn if the transfer wasn't possible. 2015-06-30 06:40:46 +02:00
Daniele Gobbetti
dc3ed1659c use parcelable for passing alarms around 2015-06-30 06:40:46 +02:00
Daniele Gobbetti
764dd70e45 low hanging fruits: 
- add break after case
- center vertically the smart wakeup checkbox
 2015-06-30 06:40:46 +02:00
Daniele Gobbetti
1caca1439a Initial implementation of setting alarms to the Mi Band. 
The code basically works, but there a lot of things to fix / improve.
* The alarms are stored to and read from the Shared Preferences, but there is no persistence within the app (basically they are read and stored at every access)
* The alarm list is not updated when coming back from the alarm detail view (probably related to the point above), but the actual alarm is
* The alarms preference names is sometimes built by concatenating strings, which is not really safe
* There is no check in the alarm constructor whether the stored string is a valid alarm representation
* Even though only 3 alarms can be stored on the device, we could have more in the app and let the user choose which to sync
* In the alarm detail view XML some material* drawables are used, it's possible that these break on android version < 5
* ...
 2015-06-30 06:40:14 +02:00
cpfeiffer
ef2bbf13c7 Close stream on error and log exception 2015-06-29 22:38:37 +02:00
Andreas Shimokawa
bf29814294 Bump version to 0.4.2, update CHANGELOG.md 2015-06-27 20:02:46 +02:00
cpfeiffer
5cde8181c9 Updated translations from transifex 2015-06-27 18:44:26 +02:00
Andreas Shimokawa
27e611c583 add share action to screenshots in notification 
Now you can brag with your pebble watchfaces and send them straight to Conversations.
 2015-06-27 18:09:49 +02:00
Andreas Shimokawa
c16510003c Open image viewer when tapping on screenshot 2015-06-27 00:21:30 +02:00
Andreas Shimokawa
44636748e7 Show screenshot in notification in successful 2015-06-26 23:17:31 +02:00
Andreas Shimokawa
388e72d029 use our accent color for Material Design 2015-06-26 00:18:44 +02:00
Andreas Shimokawa
51595aad7a Use Material Theme on Lollipop 2015-06-26 00:12:17 +02:00
Andreas Shimokawa
a73d8b7f0a Pebble: save screenshots as 1bit Windows 3.x BMP 
TODO:
- user feedback
- support Pebble Time
 2015-06-25 23:34:50 +02:00
Andreas Shimokawa
d0178686d8 Pebble: support for taking screenshots (do not get displayed/written anywhere yet) 2015-06-24 23:55:51 +02:00
Andreas Shimokawa
07d59322bd Pebble: Preparations for taking screenshots 
This commit also includes some cleanups and removal of unused code/strings
 2015-06-24 00:23:38 +02:00
cpfeiffer
4b241ca9eb Initial work on supporting multiple charts. 
- one fragment per chart screen
- common chart code should move to fragment baseclass and the host
  Activity (ChartsActivity)

Currently it's not used, change ControlCenter to invoke ChartsActivity
instead of SleepChartActivity to test it.

WIP for #79
 2015-06-23 23:03:05 +02:00
Andreas Shimokawa
5ae812c854 add GBDeviceProtocol again 2015-06-23 14:20:13 +02:00
Andreas Shimokawa
73da7fff0a Refactoring: rename GBDeviceCommand to GBDeviceEvent 2015-06-23 11:54:33 +02:00
Andreas Shimokawa
c2582e1e1f Not not display useless menu items when device is not connected 
Also remove "fetch activity data" from pebble context menu, which currently does nothing

Closes #75
 2015-06-22 22:16:19 +02:00
Andreas Shimokawa
1bd32b713a Pebble: implement encodeFindDevice() by simulating a call 2015-06-21 23:53:23 +02:00
cpfeiffer
39db968e34 Forgot to rename that method, too (#42) 2015-06-21 20:59:36 +02:00
cpfeiffer
23d91ac79e Support for finding a lost device (closes #42) 2015-06-21 19:46:02 +02:00
cpfeiffer
c7b4f295a1 Support for vibration profiles, configurable for notifications 
Configurable for sms, k9, incoming calls, pebble messages, generic
notifications.

Color is unfortunately not configurable so far, see #37

Closes #29

Currently provided profiles are
- staccato
- short
- medium
- long
- waterdrop
- ring
- alarm clock
 2015-06-21 19:46:01 +02:00
cpfeiffer
f105bbbde3 Avoid crash when getExternelDir() returns null (huh!) 2015-06-21 19:44:56 +02:00
cpfeiffer
1fb20926b3 Fix previous commit, disable LimitLines for this release 2015-06-21 19:43:45 +02:00
Andreas Shimokawa
b1973994f0 Sleep Monitor: Disable anotations for now (produces unreadable output on some devices) 2015-06-21 16:39:03 +02:00
Andreas Shimokawa
da3bff0fd4 fix German translation, fucked up by tx pull 2015-06-20 21:11:33 +02:00
cpfeiffer
e6086d6f79 updated translations from transifex 2015-06-20 20:55:21 +02:00
Andreas Shimokawa
2458e55865 Pebble: add encodeSimpleMessage() for encoding 1 byte messages to endpoints 2015-06-19 23:54:31 +02:00
Andreas Shimokawa
7e1700250f Pebble: add dev option to force latest notification protocol usage 
When enabled it forces to use 3.x notifications on FW 3.x (2.x notifcations on FW 2.x)
When disabled 2.x notification on FW 2.x and 1.x notifications on FW 2.x are used (which is recommended)

This allows Pebble Time users to do further tests.
 2015-06-19 12:34:33 +02:00
cpfeiffer
e562fa9870 Light sleep and deep sleep was mixed up. Corrected graphs again. #45 
Use dashed limit lines, still not perfect.
 2015-06-19 01:14:58 +02:00
cpfeiffer
f9e5ab5fc1 Some more refinements to sleep display (#45): 
- display the recorded level of deep sleep rather than a constant
  (I hope this works for morpheuz, too!?)
- give light sleep a minimum value, because it's sometimes 0 for Mi Band
 2015-06-19 00:20:38 +02:00
cpfeiffer
03fa05756e As a test, draw limit lines for sleep/activity changes. 
Unfortunately it looks like the labels for it don't get rendered ;-(
 2015-06-18 23:41:54 +02:00