Since the PR #2961 aswell as #2976, i pushed the changes to this pr.
Original text:
With this PR, the gadgetbridge app sends the current locationd data, obtained from the gps or network provider, to a connected banglejs device as an "gps" event.
The bangle device can use this data instead of the internal gps data. Therefor saving battery energy, since the gps chip is one of the biggest energy consumers.
Furthermore it enables the banglejs device to use the location data, based on the network with which the phone is currently connected. This would be usefull if there is no gps signal.
Updates:
I added a network provider so that it is possible to use the network location. I also overload the start method of GBLocationManager so that it is now possible to select which provider should be used to get the data (currently GPS or Network) and to set a interval to determine how often the update should be run.
For the banglejs device i added a switch to enable the sending of gps data. I also added a setting, to set the interval on how often the gps data is being updated. This allows to throttle the updates of the gps data and therefore saving energy of the smartphone batterie.
To further save energy, the app now requestes the current status of the gps from the banglejs and only sends data, if the gps of the banglejs is turned on.
In the PR #2976 I also moved the settings to the device settings of the banglejs and i moved the logic to the onLocationChanged method of the GBLocationManager.
Co-authored-by: Lukas <lukas.edi@gmx.net>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2992
Co-authored-by: LukasEdl <lukasedl@noreply.codeberg.org>
Co-committed-by: LukasEdl <lukasedl@noreply.codeberg.org>
Mostly copied from the Buds Pro as those earbuds have a similar feature set and mostly the same protocol.
Co-authored-by: narektor <narektor@noreply.codeberg.org>
Co-committed-by: narektor <narektor@noreply.codeberg.org>
The config refactor in addf7ff6a broke health settings on GTR3 and GTS3
- GTS 3 and GTR 3 health configs use protocol v1. The only difference
seems to be that the steps goal is a SHORT instead of an INT.
- It needs a refactoring from the ground up to better handle different
versions, but this is enough to get the GTR 3 and GTS 3 working.
- File uploads are split in chunks, with the size dictated by the
watches. There seem to be 2 protocol versions, without any noticeable
differences
- Extract the file upload logic to a standalone class. This makes it
easier to keep track of concurrent requests, each of which have their
own session id
- Icons larger than 8KB will end up split in multiple chunks - we now
handle that correctly
- Notification icons are also requested in 2 different formats, but
the actual encoding seems to be the same, with only a different id
- use encryption to create data rather then replay captured BLE traffic
- use periodical data sender, as is required by the BLE module
- extract string resources
- adds initial device support
- can control driving forward/back/left/right
- probably could be implemented further:
- battery reading
- device name?
- lights on
- fast/slow speed mode
Add support for (explicit) service intents.
Add support for setting flags for intents.
Add support for setting multiple categories for intents.
Add ability for Gadgetbridge to wake the Android device and leave the
lock screen to start activities when it is sleeping. A new activity
'WakeActivity' is used for this. (Must use 'trusted device' in Android)
Add dismiss-button to 'display over other apps' permission pop up.
Bangle.js can send "gadgetbridge" as package info to accomodate the
different GB build variants/flavours.
Use only getContext() and not getApplicationContext() when executing
the intents.
Add basic initial support for the Amazfit GTS 3 based on Xiaomi Smart Band 7 support.
What was already tested (other features might work too):
**Implemented features**
Connection
Reconnect after Airplane mode
Set time
Notifications
Send to band
Delete notifications on phone/band when deleted on the other
Calls
Custom notification icons
Handle + ack notification replies from band
Music (with youtube music)
Music Info
Volume
Music buttons
Find Phone from band / stop on band when stopped on phone
Battery Info (request, parse)
Flash Watchface
Night mode (mode, schedule)
Lift wrist (mode, schedule, sensitivity)
(Not) working features might be similar to Miband 7.
Tested on
FW: 7.42.5.1
HW: 0.76.17.4
Co-authored-by: Andreas Sedlmayer <sedlmayer.andreas89@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2871
Co-authored-by: sedy89 <sedy89@noreply.codeberg.org>
Co-committed-by: sedy89 <sedy89@noreply.codeberg.org>
This PR adds support for the flipper zero device.
It's main purpose currently is to provide an Intent-based API to Tasker and similar apps to play sub-GHz files.
In the future, file management and other features might be useful.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2840
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
This PR aims to add support for the newer Fossil Gen. 6 Hybrid models, which are pretty similar to the older HR's.
Here's my checklist
- [x] make GB recognize and accept new watches
- [ ] find out how SPO2 is transmitted
- [ ] extend activity data to include Oxygen data
- [x] create timeout for requests to avoid deadlocks
- [x] fix device vibration on every reconnect
- [ ] create API for voice commands
- [x] figure out how the voice data works
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2775
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
The 2nd TimeZone watchface widget was configured with an offset that
didn't take DST into account. This change makes it use the correct
offset.
Fixes#2761
- open app preferences screen from device card menu
- open auth preferences screen from DiscoveryActivity
- add explanation about Auth key, make it open wiki link, fix#2240
- add New protocol checkbox and explanation when first pairing Miband 6
Allows to install latest watchapps
It seems that every time the firmware gets a major update, the new watchapps
have a different minor version, we dont need to check for that because watchapps
seem to be compatible accross firmware versions
this PR aims to add device for multiple connected devices at once.
A lot of stuff already works, some things need to be done:
- [x] change DeviceCommunicationService to hold multiple devices and supports
- [x] implement connect / disconnect logic
- [x] widgets, not really suited for multiple devices, so far
- [x] change the notification to show multiple devices
- [ ] change GBDeviceService#onFindDevice and similar API functions to target individual devices, not all connected.
- [x] move auto-reconnect setting to device settings
- [x] fix music event crash
- [x] work out behaviour when pressing "connect" from notification
- [ ] handle service crashes
- [ ] suit coordinator methods for multiple devices of same kind
- [x] change ACL_CONNECTED receiver to connect to devices that are not currently registered in DeviceCommunicationService
- [ ] adjust after-boot auto-connection logic
- [ ] fix hanging device support. Device says disconnected, GB says connected
- [x] firmware updater doesn't work
My attempt to make onFindDevice work was to change the arguments to ```EventHandler#onFindDevice(GBDevice device, boolean start)```.
The Problem is that this forces the device-specific implementations to also accept GBDevice as an argument.
Co-authored-by: Daniel Dakhno <dakhnod@gmail.com>
Co-authored-by: Andreas Shimokawa <shimokawa@fsfe.org>
Co-authored-by: dakhnod <dakhnod@gmail.com>
Reviewed-on: https://codeberg.org/Freeyourgadget/Gadgetbridge/pulls/2526
Co-authored-by: dakhnod <dakhnod@noreply.codeberg.org>
Co-committed-by: dakhnod <dakhnod@noreply.codeberg.org>
