NOTE:
Total allowed bytes for all replies = 512 - (reply count - 1)
TODO:
- check with Firmware 2.9.1
- remove last reply that exceeds the 512 bytes limit completly (else it will be partly truncated)
- Implement the PebbleProtocol side (2.x and 3.x)
- Add Preferences for canned replies
This can be tested by enabling untested features in Pebble Settings
It lets you see and select the replies set up in "Canned Repies" on the Pebble
You will get a "NOT IMPLENTED" message on your Pebble.
THIS DOES NOT ACTUALLY DO ANYTHING USEFUL YET.
I hope I didn't break firmware upgrades on some Mi 1 models
other than mine (my hardware revision is 2).
Upgrades for Mi 1S are currently disabled, we need some brave
souls who can help us test this.
Closes#173
Also see: #169
They are now sent whenever the Alarms activity is finished.
Display "All alarms disabled" when no alarm is enabled.
Unrelated: pass exceptions to GB.toast() where applicable.
Nice hack: MPAndroidChart supports animating values, but only animating
a new entry, going from zero to its actual value. We want to animate
a single entry changing its value.
Since it's just a single entry, we can let a custom animator do this
(without knowledge of any other entries).
First comes the pie chart (details) now, the the bar chart (overview)
Maybe we should do this differently in the sleep and week-steps
fragments, but for a start, and having it consistently, this is how it is.
- append a string on the control center when the device is charging
- battery status string is no more, welcome battery state enum
- the notification will not be shown when the device is charging, even if the level is below threshold
- only show the bigtext notification if the device has set extended battery info
- custom icon for the low battery notification (with license information)
- show device name in the notification
- set the notification to high priority
- the battery threshold is now set in GBDevice
NOTE:
- supports aplite and basalt emulator
- needs recompilation of Gadgetbridge with INTERNET permission
TODO:
- fix disconnect issues
- emulator special packet support
- string localization
- ...
- model package contains mostly shared interfaces (UI+service), not named GB*
- impl package contains implementations of those interfaces, named GB*
the impl classes should not be used by the service (not completely done)
- the service classes should mostly use classes inside the service and deviceevents
packages (tbd)
Every device now has two packages:
- devices/[device name] for UI related functionality
- service[device name] for lowlevel communication
This release seems to be working quite well with respect to the firmware upgrading itself. The user facing part needs more work.
In order to update the firmware one has to:
- open a file ending with .fw
- switch from the firmware upgrade activity to the main one
- connect to the miband
- return to the firmware upgrade activity
- press the "install" button (that became active when the device connection was established)
Caveats:
There are almost no check wrt. the integrity of the firmware files.
Known issue: scrolling a zoomed-in chart interferes with swiping to the
next/previous chart (so far there's just one, but...)
Workaround: Swipe down and then left or right in one go, this will let
you scroll the zoomed chart
- the day of week are evenly spread across the screen in the alarms detail activity
- the alarms are stored in a single shared preference (as a set) NB: you'll have to reset your alarms if you used a previous version (and also manually clean the shared preferences, but this is not needed)
- the list of alarms gets correctly updated after editing a specific alarm
- the actionbar back button saves the alarm status, the device back button doesn't. I'm not sure if it's a bug or a feature :)
The code basically works, but there a lot of things to fix / improve.
* The alarms are stored to and read from the Shared Preferences, but there is no persistence within the app (basically they are read and stored at every access)
* The alarm list is not updated when coming back from the alarm detail view (probably related to the point above), but the actual alarm is
* The alarms preference names is sometimes built by concatenating strings, which is not really safe
* There is no check in the alarm constructor whether the stored string is a valid alarm representation
* Even though only 3 alarms can be stored on the device, we could have more in the app and let the user choose which to sync
* In the alarm detail view XML some material* drawables are used, it's possible that these break on android version < 5
* ...
- one fragment per chart screen
- common chart code should move to fragment baseclass and the host
Activity (ChartsActivity)
Currently it's not used, change ControlCenter to invoke ChartsActivity
instead of SleepChartActivity to test it.
WIP for #79
Configurable for sms, k9, incoming calls, pebble messages, generic
notifications.
Color is unfortunately not configurable so far, see #37Closes#29
Currently provided profiles are
- staccato
- short
- medium
- long
- waterdrop
- ring
- alarm clock
When enabled it forces to use 3.x notifications on FW 3.x (2.x notifcations on FW 2.x)
When disabled 2.x notification on FW 2.x and 1.x notifications on FW 2.x are used (which is recommended)
This allows Pebble Time users to do further tests.
- use just one data set, because multiple data sets is not supported
by MPAndroidChart (the way we need it)
Now there is hardly any space between the bars anymore
Also:
- allow scaling x and y axis independently via pinch gesture
- set fixed y max value (1.0) so that the display is stable and
independent of the actual available data
- (at least temporarily) display y labels
- supports zooming an panning
- displays labels for all x-values (= time of day)
- fix deep vs. light sleep constants
- increase activity data buffer size for Mi Band
A device now has a busy flag (set during synchronization). While busy,
no other communication with the device shall occur (TODO)
Refactors the non-bluetooth actions a bit #45
Next step: make use of the busy state in ControlCenter (show
a busy cursor) and in BluetoothCommunicationService (to not call other
operations while busy)
For a start, use android-logger as backend. Needs a better configuration
but no time right now.
For file-logging we will use logback as slf4j-implementation.
