Gadgetbridge/CHANGELOG.md

###Changelog

####Version 0.7.4 (next)
* Refactored the settings activity: User details are now generic instead of miband specific. Old settings are preserved.
* Pebble: Fix regression with broken active reconnect since 0.7.0

####Version 0.7.3
* Pebble: Report connection state to PebbleKit companion apps via content provider. NOTE: Makes Gadgetbridge mutual exclusive with the original Pebble app.
* Ignore generic notification when from SMSSecure when SMS Notifications are on

####Version 0.7.2
* Pebble: Allow replying to generic notifications that contain a wearable reply action (tested with Signal)
* Pebble: Support seting up a common suffix for canned replies (defaults to " (canned reply)")
* Mi Band: Avoid NPEs when aborting an erroneous sync #205
* Mi Band: Fix discovery of Mi Band 1S
* Add a confirmation dialog when performing a db import
* Sort blacklist by package names

####Version 0.7.1
* Pebble: allow reinstallation of apps in pbw-cache from App Manager (long press menu)
* Pebble: Fix regression which freezes Gadgetbridge when disconnecting via long-press menu

####Version 0.7.0
* Read upcoming events (up to 7 days in the future). Requires READ_CALENDAR permission 
* Fix double SMS on Sony Android and Android 6.0
* Pebble: Support replying to SMS form the watch (canned replies)
* Pebble: Allow installing apps compiled with SDK 2.x also on the basalt platform (Time, Time Steel)
* Pebble: Fix decoding strings in appmessages from the pebble (fixes sending SMS from "Dialer for Pebble")
* Pebble: Support incoming reconnections when device returns from "Airplane Mode" or "Stand-By Mode"
* Pebble: Fix crash when turning off bluetooth when connected on Android 6.0
* Mi Band: reserve some alarm slots for alerting when upcoming events begin. NB: the band will vibrate at the start time of the event, android reminders are ignored
* Mi Band: Display unique devices Names, not just "MI"
* Some new and updated icons

####Version 0.6.9
* Pebble: Store app details in pbw-cache and display them in app manager on firmware 3.x 
* Pebble: Increase maximum notification body length from 255 to 512 bytes on firmware 3.x
* Pebble: Support installing .pbl (language files) on firmware 3.x
* Pebble: Correct setting the timezone on firmware 3.x (pebble expects the "ID" eg. Europe/Berlin)
* Pebble: Show correct icon for activity tracker and watchfaces in app installer (language and fw icons still missing)
* Pebble: Fix crash when trying to install files though a file manager which are located inside the pbw-cache on firmware 3.x
* Support for deleting all activity data (in the 'Debug' screen)
* Don't pop up the virtual keyboard when entering the Debug screen
* Remove all pending notifications on quit
* Mi Band: KitKat: hopefully fixed showing the progress bar during activity data synchronization (#155)
* Mi Band 1S: hopefully fixed connection errors (#178) Notifications probably do not work yet, though

####Version 0.6.8
* Mi Band: support for Firmware upgrade/downgrade on Mi Band 1A (white LEDs, no heartrate sensor)
* Pebble: fix regression in 0.6.7 when installing pbw/pbz files from content providers (eg. download manager)
* Pebble: fix installation of pbw files on firmware 3.x when using content providers (eg. download manager)   
* Pebble: fix crash on firmware 3.x when pebble requests a pbw that is not in Gadgetbridge's cache 
+ Treat Signal notifications as chat notifications
* Fix crash when contacts cannot be read on Android 6.0 (non-granted pemissions)

####Version 0.6.7
* Pebble: Allow installation of 3.x apps on OG Pebble (FW will be released soon)
* Fix crashes on startup when logging is enabled or when entering the app manager on some phones
+ Fix Pebble being detected as MI when unpaired and autoconnect is enabled
* Fix Crash when not having K9 Mail permissions (happens when installing K9 after Gadgetbridge) (#175)

####Version 0.6.6
* Mi Band: Huge performance improvement fetching activity data
* Mi Band: attempt at fixing connection problems (#156)
* Pebble: Try to interpret sleep data from Misfit data
* Fix exporting the activity database on devices with read-only external storage (#153)
* Fix totally wrong sleep time in the sleep chart

####Version 0.6.5
* Mi Band: Support "Locate Device" with Mi Band 1A (and Mi Band 1 with new firmware)
* Pebble: Support syncing steps from Misfit (untested features must be turned on to see them), intensity=steps, no sleep support yet
* Disable activity fetching when not supported
* Small improvements to live activity charts

####Version 0.6.4
* Support pull down to synchronize activity data (#138)
* Display tabs in the Charts activity (#139)
* Mi Band: initial support for Mi Band 1a (the one with white LEDs) (thanks @sarg) (#136)
* Mi Band: Attempt at fixing problem with never finishing activity data fetching (#141, #142)
* Register/unregister BroadcastReceivers instead of enabling/disabling them with PackageManager (#134)
  (should fix disconnection because the service is being killed)

####Version 0.6.3
* Pebble: support installation of language files (.pbl) on FW 2.x
* Try to prevent service being killed by disallowing backups

####Version 0.6.2
* Mi Band: support firmare versione 1.0.10.14 (and onwards?) vibration
* Mi Band: get device name from official BT SIG endpoint
* Mi Band: initial support for displaying live activity data, screen stays on

####Version 0.6.1
* Pebble: Allow muting (blacklisting) Apps from within generic notifications on the watch
* Pebble: Detect all known Pebble Versions including new "chalk" platform (Pebble Time Round)
* Option to ignore phone calls (useful for Pebble Dialer)
* Mi Band: Added progressbar for activity data transfer and fixes for firmware transfer progressbar
* Bugfix for app blacklist (some checkboxes where wrongly drawn as checked)

####Version 0.6.0
* Pebble: WIP implementantion of PebbleKit Intents to make some 3rd party Android apps work with the Pebble (eg. Ventoo)
* Pebble: Option to set reconnection attempts in settings (one attempt usually takes about 5 seconds)
* Support contolling all audio players that react to media buttons (can be chosen in settings)
* Treat SMS as generic notification if set to "never" (can be blacklisted there also if desired)
* Treat Conversations messagess as chat messages, even if arrived via Pebble Intents (nice icon for Pebble FW 3.x)
* Allow opening firmware / app files from the download manager "app" (technically a content provider)
* Mi Band: whitelisted a few firmware versions

####Version 0.5.4
* Mi Band: allow the transfer of activity data without clearing MiBand's memory
* Pebble: for generic notifications use generic icon instead of SMS icons on FW 3.x (thanks @roidelapluie)
* Pebble: use different icons and background colors for specific groups of applications (chat, mail, etc) (thanks @roidelapluie)
* In settings, support blacklisting apps for generic notifications

####Version 0.5.3
* Pebble: For generic notifications, support dismissing individual notifications and "Open on Phone" feature (OG & PT)
* Pebble: Allow to treat K9 notifications as generic notifications (if notification mode is set to never)
* Ignore QKSMS notifications to avoid double notification for incoming SMS
* Improved UI of Firmware/App installer
* Device state again visible on lockscreen
* Date display and navigation now working properly for all charts

####Version 0.5.2
* Pebble: support "dismiss all" action also on Pebble Time/FW 3.x notifications
* Mi Band: show a notification when the battery is below 10%
* Graphs are now using the same theme as the rest of the application
* Graphs now show when the device was not worn by the user (for devices that send this information)
* Remove unused settings option in charts view
* Build target is now Android SDK 23 (Marshmellow)

####Version 0.5.1
* Pebble: support taking screenshot from Pebble Time
* Fix broken "find lost device" which was broken in 0.5.0

####Version 0.5.0
* Mi Band: fix setting wear location
* Pebble: experimental watchapp installation support for FW 3.x/Pebble Time
* Pebble: support Pebble emulator via TCP connection (needs rebuild with INTERNET permission)
* Pebble: use SMS/EMAIL icons for FW 3.x/Pebble Time
* Pebble: do not throttle notifications
* Support going forward/backwards in time in the activity charts
* Various small bugfixes to the App/Fw Installation Activity

####Version 0.4.6
* Mi Band: Fixed negative number of steps displayed (#91)
* Mi Band: fixed (re-) connection problems after band getting disconnected
* Pebble: new option to enable untested code (enable only if you like bad surprises)
* Pebble: always enable 2.x notifications with "dismiss all" action on FW 2.x (except for K9)
* Fixed slight steps graph distortion through black text labels
* Fixed control center activity and notification showing different device connection state
* Small firmware installation improvements
* Various refactorings and code cleanups

####Version 0.4.5
* Enhancement to activity graphs: new graph showing the number of steps done today and in the last week
* New preference to set the desired fitness goal (number of steps to walk in one day)
* Mi Band: support for setting the fitness goal (the band will show the progress to the goal with the leds and vibrates when the goal is reached)
* Mi Band: send the wear location (left / right hand) to the device
* Mi Band: support for flashing firmware from .fw files (upgrades and downgrades are possible)
* Fixed crash when synchronizing activity data in the graphs activity and changing device orientation

####Version 0.4.4
* Set GadgetBridge notification visibility to public, to show the connection status on the lockscreen
* Support for backup up and restoring of the activity database (via Debug activity)
* Support for graceful upgrades and downgrades, keeping your activity database intact
* Enhancement to activity graphs: new graphs for sleep data (only last night) accessible swiping right from the main graph
* Enhancement to graphs activity: it is now possible to fetch the activity data directly from this activity
* Pebble: experimental support for dismissing (all) notifications via actionable notifications (disabled by default)
* Pebble: make FW 3.x notifications available by default
* Mi Band: Set the graphs activity as the default action available with a single tap on the connected device

####Version 0.4.3
* Mi Band: Support for setting alarms
* Mi Band: Bugfix for activity data synchronization

####Version 0.4.2
* Material style for Lollipop
* Support for finding a lost device (vibrate until cancelled)
* Mi Band: Support for vibration profiles, configurable for notifications
* Pebble: Support taking screenshots from the device context menu (Pebble Time not supported yet)

####Version 0.4.1
* New icons, thanks xphnx!
* Improvements to Sleep Monitor charts
* Pebble: use new Sleep Monitor for Morpheuz (previously Mi Band only)
* Pebble: experimental support for FW 3.x notification protocol
* Pebble: dev option to force latest notification protocol

####Version 0.4.0
* Pebble: Initial Morpheuz protocol support for getting sleep data
* Pebble: Support launching of watchapps though the AppManager Activity
* Pebble: Support CM 12.1 default music app (Eleven)
* Pebble: Fix firmware installation when all 8 app slots are in use
* Pebble: Fix firmware installation when Pebble is in recovery mode
* Pebble: Fix error when reinstalling apps, useful for upgrading/downgrading
* Mi Band: Make vibration count configurable for different kinds of Notifications
* Mi Band: Initial support for fetching activity data
* Support rebooting Mi Band/Pebble through the Debug Activity
* Add highly experimental sleep monitor (accessible via long press on a device)
* Fix Debug activity (SMS and E-Mail buttons were broken)
* Add Turkish translation contributed by Tarik Sekmen

####Version 0.3.5
* Add discovery and pairing Activity for Pebble and Mi Band
* Listen for Pebble Message Intents and forward notifications (used by Conversations)
* Make strings translatable and add German, Italian, Russian, Spanish and Korean translations
* Mi Band: Display battery status

####Version 0.3.4
* Pebble: Huge speedup for app/firmware installation.
* Pebble: Use a separate notification with progress bar for installation procedure
* Pebble: Bugfix for being stuck while waiting for a slot, when none is available
* Mi Band: Display connection status in notification (previously Pebble only)

####Version 0.3.3
* Pebble: Try to reduce battery usage by acknowledging datalog packets
* Mi Band: Set current time on the device (thanks to PR by @danielegobbetti)
* More robust connection state handling and display

####Version 0.3.2
* Mi Band: Fix for notifications only working after manual connection
* Mi Band: Display firmware version
* Pebble: Display hardware revision
* Pebble: Check if firmware is compatible before allowing installation

####Version 0.3.1
* Mi Band: Fix for notifications only working in Debug

####Version 0.3.0
* Mi Band: Initial support (see README.md)
* Pebble: Firmware installation (USE AT YOUR OWN RISK)
* Pebble: Fix installation problems with certain .pbw files
* Pebble: Volume control
* Add icon for activity tracker apps (icon by xphnx)
* Let the application quit when in reconnecting state

####Version 0.2.0
* Experimental pbw installation support (watchfaces/apps)
* New icons for device and app lists
* Fix for device list not refreshing when bluetooth gets turned on
* Filter out annoying low battery notifications
* Fix for crash on some devices when creating a debug notification
* Lots of internal changes preparing multi device support

####Version 0.1.5
* Fix for DST (summer time)
* Option to sync time on connect (enabled by default)
* Opening .pbw files with Gadgetbridge prints some package information
  (This was not meant to be released yet, but the DST fix made a new release necessary)

####Version 0.1.4
* New AppManager shows installed Apps/Watchfaces (removal possible via context menu)
* Allow back navigation in ActionBar (Debug and AppMananger Activities)
* Make sure Intent broadcasts do not leave Gadgetbridge
* Show hint in the Main Activity (tap to connect etc)

####Version 0.1.3
* Remove the connect button, list all supported devices and connect on tap instead
* Display connection status and firmware of connected devices in the device list
* Remove quit button from the service notification, put a quit item in the context menu instead

####Version 0.1.2
* Added option to start Gadgetbridge and connect automatically when bluetooth is turned on
* stop service if bluetooth is turned off
* try to reconnect if connection was lost

####Version 0.1.1
* Fixed various bugs regarding K-9 Mail notifications.
* "Generic notification support" in Setting now opens Androids "Notification access" dialog.

####Version 0.1.0
* Initial release