This reverts commit d63bb4811e as this not covered correctly all cases and so could lead to missing fireChannelReadComplete() calls. We will re-evalute d63bb4811e and resbumit a pr once we are sure all is handled correctly
Motivation:
The `AsciiString#toString` method calculate string value and cache it into field. If an `AsciiString` created from the `String` value, we can avoid rebuilding strings if we cache them immediately when creating `AsciiString`. It would be useful for constants strings, which already stored in the JVMs string table, or in cases where an unavoidable `#toString `method call is assumed.
Modifications:
- Add new static method `AsciiString#cache(String)` which save string value into cache field.
- Apply a "benign" data race in the `#hashCode` and `#toString` methods.
Result:
Less memory usage in some `AsciiString` use cases.
Motivation:
HttpObjectAggregator differs from HttpServerExpectContinueHandler's handling
of expect headers by not stripping the 'expect' header when a response
is generated.
Modifications:
HttpObjectAggregator now removes the 'expect' header in cases where it generates
a response.
Result:
Consistent and correct behavior between HttpObjectAggregator and HttpServerExpectContinueHandler.
Motivation:
Issue #6695 states that there is an issue when writing empty content via HttpResponseEncoder.
Modifications:
Add two test-cases.
Result:
Verified that all works as expected.
Motivation:
Its wasteful and also confusing that channelReadComplete() is called even if there was no message forwarded to the next handler.
Modifications:
- Only call ctx.fireChannelReadComplete() if at least one message was decoded
- Add unit test
Result:
Less confusing behavior. Fixes [#4312].
Motivation:
08748344d8 introduced two new tests which did not take into account that the multipart delimiter can be between 2 and 16 bytes long.
Modifications:
Take the multipart delimiter length into account.
Result:
Fixes [#7001]
Motivation:
codec-http2 currently does not strictly enforce the HTTP/1.x semantics with respect to the number of headers defined in RFC 7540 Section 8.1 [1]. We currently don't validate the number of headers nor do we validate that the trailing headers should indicate EOS.
[1] https://tools.ietf.org/html/rfc7540#section-8.1
Modifications:
- DefaultHttp2ConnectionDecoder should only allow decoding of a single headers and a single trailers
- DefaultHttp2ConnectionEncoder should only allow encoding of a single headers and optionally a single trailers
Result:
Constraints of RFC 7540 restricting the number of headers/trailers is enforced.
Motivation:
HttpPostRequestEncoder maintains an internal buffer that holds the
current encoded data. There are use cases when this internal buffer
becomes null, the next chunk processing implementation should take
this into consideration.
Modifications:
- When preparing the last chunk if currentBuffer is null, mark
isLastChunkSent as true and send LastHttpContent.EMPTY_LAST_CONTENT
- When calculating the remaining size take into consideration that the
currentBuffer might be null
- Tests are based on those provided in the issue by @nebhale and @bfiorini
Result:
Fixes#5478
Motivation:
- A `HttpPostMultipartRequestDecoder` contains two pairs of the same methods: `readFileUploadByteMultipartStandard`+`readFileUploadByteMultipart` and `loadFieldMultipartStandard`+`loadFieldMultipart`.
- These methods use `NotEnoughDataDecoderException` to detecting not last data chunk (exception handling is very expensive).
- These methods can be greatly simplified.
- Methods `loadFieldMultipart` and `loadFieldMultipartStandard` has an unnecessary catching for the `IndexOutOfBoundsException`.
Modifications:
- Remove duplicate methods.
- Replace handling `NotEnoughDataDecoderException` by the return of a boolean result.
- Simplify code.
Result:
The code is cleaner and easier to support. Less exception handling logic.
Motivation:
1. Some encoders used a `ByteBuf#writeBytes` to write short constant byte array (2-3 bytes). This can be replaced with more faster `ByteBuf#writeShort` or `ByteBuf#writeMedium` which do not access the memory.
2. Two chained calls of the `ByteBuf#setByte` with constants can be replaced with one `ByteBuf#setShort` to reduce index checks.
3. The signature of method `HttpHeadersEncoder#encoderHeader` has an unnecessary `throws`.
Modifications:
1. Use `ByteBuf#writeShort` or `ByteBuf#writeMedium` instead of `ByteBuf#writeBytes` for the constants.
2. Use `ByteBuf#setShort` instead of chained call of the `ByteBuf#setByte` with constants.
3. Remove an unnecessary `throws` from `HttpHeadersEncoder#encoderHeader`.
Result:
A bit faster writes constants into buffers.
Motivation:
Right now HttpRequestEncoder does insertion of slash for url like http://localhost?pararm=1 before the question mark. It is done not effectively.
Modification:
Code:
new StringBuilder(len + 1)
.append(uri, 0, index)
.append(SLASH)
.append(uri, index, len)
.toString();
Replaced with:
new StringBuilder(uri)
.insert(index, SLASH)
.toString();
Result:
Faster HttpRequestEncoder. Additional small test. Attached benchmark in PR.
Benchmark Mode Cnt Score Error Units
HttpRequestEncoderInsertBenchmark.newEncoder thrpt 40 3704843.303 ± 98950.919 ops/s
HttpRequestEncoderInsertBenchmark.oldEncoder thrpt 40 3284236.960 ± 134433.217 ops/s
Motivation:
1. `ByteBuf` contains methods to writing `CharSequence` which optimized for UTF-8 and ASCII encodings. We can also apply optimization for ISO-8859-1.
2. In many places appropriate methods are not used.
Modifications:
1. Apply optimization for ISO-8859-1 encoding in the `ByteBuf#setCharSequence` realizations.
2. Apply appropriate methods for writing `CharSequences` into buffers.
Result:
Reduce overhead from string-to-bytes conversion.
Motivation:
These headers can be used to prevent clickjacking.
Modifications:
Add static fields for content-security-policy and x-frame-options
Result:
Expose general useful names
Motivation:
A life cycle of QueryStringEncoder is simple: create, append params, convert to String. Current realization collect params in the list, and calculate an URI string in `toString` method. We can simplify this: don't store params to the list, and immediately append parameters to the `StringBuilder`.
Modifications:
- Remove list for params and remove a tuple class `Param`.
- Use one common `StringBuilder` and append parameters into it.
- Resolve `TODO` in the `encodeParam` method.
Result:
Less allocations (no `ArrayList`, no `Param` tuples). Second `toString` call is faster.
Motivation:
PR #6811 introduced a public utility methods to decode hex dump and its parts, but they are not visible from netty-common.
Modifications:
1. Move the `decodeHexByte`, `decodeHexDump` and `decodeHexNibble` methods into `StringUtils`.
2. Apply these methods where applicable.
3. Remove similar methods from other locations (e.g. `HpackHex` test class).
Result:
Less code duplication.
Motivation:
If the content-length does not parse as a number, leniency causes this
to instead be parsed as the default value. This leads to bodies being
silently ignored on requests which can be incredibly dangerous. Instead,
if the content-length header is invalid, an exception should be thrown
for upstream handling.
Modifications:
This commit removes the leniency in parsing the content-length header by
allowing a number format exception, if thrown, to escape from the method
rather than falling back to the default value.
Result:
In invalid content-length header will not be silently ignored.
Motivation:
For multi-line headers HttpObjectDecoder uses StringBuilder.append(a).append(b) pattern that could be easily replaced with regular a + b. Also oparations with a and b moved out from concat operation to make it friendly for StringOptimizeConcat optimization and thus - faster.
Modification:
StringBuilder.append(a).append(b) reaplced with a + b. Operations with a and b moved out from concat oparation.
Result:
Code simpler to read and faster.
Motivation:
The class `HttpPostRequestEncoder` has minor issues:
- The `encodeNextChunkMultipart()` method contains two identical blocks of code with a difference only in the cast interfaces: `Attribute` vs `HttpData`. Because the `Attribute` is extended by `HttpData`, the block with the `Attribute` can be safely deleted.
- The `getNewMultipartDelimiter()` method contains a redundant `toLowerCase()`.
- The `addBodyFileUploads()` method throws `NPE` instead of `IllegalArgumentException`.
Modifications:
- Remove duplicated code block from `encodeNextChunkMultipart()`.
- Remove redundant `toLowerCase()` from `getNewMultipartDelimiter()`.
- Replace `NPE` with `IllegalArgumentException` in `addBodyFileUploads()`.
- Use `ObjectUtil#checkNotNull` where possible.
Result:
More correct and clean code.
Motivations:
1. There are duplicated implementations of decoding hex strings. #6797
2. ByteBufUtil.HexUtil.decodeHexDump does not handle substring start
index properly and does not decode hex byte rigorously.
Modifications:
1. Function decodeHexByte is moved from QueryStringDecoder into ByteBufUtil.
2. ByteBufUtil.HexUtil.decodeHexDump is changed to use decodeHexByte.
3. Tests are Updated accordingly.
Result:
Fixed#6797 and made hex decoding functions more robust.
Motivation:
A `SeekAheadNoBackArrayException` used as check for `ByteBuf#hasArray`. The catch of exceptions carries a large overhead on stack trace filling, and this should be avoided.
Modifications:
- Remove the class `SeekAheadNoBackArrayException` and replace its usage with `if` statements.
- Use methods from `ObjectUtils` for better readability.
- Make private methods static where it make sense.
- Remove unused private methods.
Result:
Less of exception handling logic, better performance.
Motivation:
If a full HttpResponse with a Content-Length header is encoded by the HttpContentEncoder subtypes the Content-Length header is removed and the message is set to Transfer-Encoder: chunked. This is an unnecessary loss of information about the message content.
Modifications:
- If a full HttpResponse has a Content-Length header, the header is adjusted after encoding.
Result:
Complete messages continue to have the Content-Length header after encoding.
Motivation:
QueryStringDecoder has several problems:
- doesn't decode correctly path part with `+` (plus) sign in it,
- doesn't cut a `fragment` (after `#`) from query string (see RFC 3986),
- doesn't work correctly with encoding,
- treat `%%` as a percent character escaping (it's don't described in RFC).
Modifications:
- leave `+` chars in a `path` part of uri string,
- ignore `fragment` part (after `#`),
- correctly work with encoding.
- don't treat `%%` as escaping for the `%`.
Result:
Fixed issues from #6745.
Motivation:
Allow subclasses of HttpObjectEncoder other than HttpServerCodec to override the isContentAlwaysEmpty method
Modification:
Change the method visibility from package private to protected
Result:
Fixes#6761
Motivation:
Fix the regression recently introduced that causes already encoded responses to be encoded again as gzip
Modification:
instead of just looking for IDENTITY, anything set for Content-Encoding should be respected and left as-is
added unit tests to capture this use case
Result:
Fixes#6784
Motivation
RFC 1945 (see section 3.1) says that request lines may not have a version in which case the request is assumed to be HTTP/0.9. We don't necessarily want to support that but the existing Exception should indicate the possibility of the request being HTTP/0.9 and give the user a chance to track it down.
Modifications
Indicate in the Exception's message that the request is possibly HTTP/0.9.
Result
Fixes#6739
Motivation:
The status 308 is defined by RFC7538.
This RFC has currently the state Proposed Standard since 2 years, but the status code is already handle by all browsers (Chrome, Firefox, Edge, Safari, …).
To let developer handles easily this status code, it is added into this list.
Modifications:
Added this status code in the list of all status codes and changed the valudOf() method
Result:
Status code 308 included
__Motivation__
`HttpClientCodec` skips HTTP decoding on the connection after a successful HTTP CONNECT response is received.
This behavior follows the spec for a client but pragmatically, if one creates a client to use a proxy transparently, the codec becomes useless after HTTP CONNECT.
Ideally, one should be able to configure whether HTTP CONNECT should result in pass-through or not. This will enable client writers to continue using HTTP decoding even after HTTP CONNECT.
__Modification__
Added overloaded constructors to accept `parseHttpPostConnect`. If this parameter is `true` then the codec continues decoding even after a successful HTTP CONNECT.
Also fixed a bug in the codec that was incrementing request count post HTTP CONNECT but not decrementing it on response. Now, the request count is only incremented if the codec is not `done`.
__Result__
Easier usage by HTTP client writers who wants to connect to a proxy but still decode HTTP for their users for subsequent requests.
Motivation:
Some JUnit assert calls can be replaced by simpler.
Modifications:
Replacement with a more suitable methods.
Result:
More informative JUnit reports.
Motivation:
HttpServerKeepAliveHandler throws unexpected error when I do ctx.writeAndFlush(msg, ctx.voidPromise()); where msg is with header "Connection:close".
Modification:
HttpServerKeepAliveHandler does promise.unvoid() before adding close listener.
Result:
No error for VoidChannelPromise with HttpServerKeepAliveHandler. Fixes [#6698].
Motivation:
It would be more flexible to make getCharset and getMimeType code usable not only for HttpMessage entity but just for any CharSequence. This will improve usability in general purpose code and will help to avoid multiple fetching of ContentType header from a message. It could be done in an external code once and CharSequence method versions could be applied.
Modification:
Expose HttpUtil#getMimeType, HttpUtil#getCharsetAsString, HttpUtil#getCharset versions which works with CharSequence. New methods are reused in the old ones which work with HttpMessage entity.
Result:
More flexible methods set with a good code reusing.
Motivation:
WebSocket decoding throws exceptions on failure that should cause the
pipline to close. These are currently ignored in the
`WebSocketProtocolHandler` and `WebSocketServerProtocolHandler`. In
particular, this means that messages exceding the max message size will
cause the channel to close with no reported failure.
Modifications:
Re-fire the event just before closing the socket to allow it to be
handled appropriately.
Result:
Closes [#3063].
Motivation:
If Content-Encoding: IDENTITY is used we should not try to compress the http message but just let it pass-through.
Modifications:
Remove "!"
Result:
Fixes [#6689]
It is generally useful to have origin http servers respond to
"expect: continue-100" as soon as possible but applications without a
HttpObjectAggregator in their pipelines must use boiler plate to do so.
Modifications:
Introduce the HttpServerExpectContinueHandler handler to make it easier.
Result:
Less boiler plate for http application authors.
Motivation:
DiskFileUpload creates temporary files for storing user uploads containing the user provided file name as part of the temporary file name. While most security problems are prevented by using "new File(userFileName).getName()" a small risk for bugs or security issues remains.
Modifications:
Use a constant string as file name and rely on the callers use of File.createTemp to ensure unique disk file names.
Result:
A slight security improvement at the cost of a little more obfuscated temp file names.
Motivation:
We miss to retain a slice before return it to the user and so an reference count error may accour later on.
Modifications:
Use readRetainedSlice(...) and so ensure we retain the buffer before hand it of to the user.
Result:
Fixes [#6626].
