Commit Graph

613 Commits

Author SHA1 Message Date
Jake Luciani
d547b5d51d Fix capacity check bug affecting offheap buffers 2014-05-13 07:25:15 +02:00
Trustin Lee
db3709e652 Synchronized between 4.1 and master
Motivation:

4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master.  We must make sure 4.1 and master are not very
different now.

Modification:

Fix found differences

Result:

4.1 and master got closer.
2014-04-25 00:38:02 +09:00
ian
15d11289b0 Fix error that causes (up to) double memory usage
Motivation:

PoolArena's 'normalizeCapacity' function was micro-optimized some
time ago to remove a while loop. However, there was a change of
behavior in the function as a result. Capacities passed into it
that are already powers of 2 (and >= 512) are doubled in size. So
if I ask for a buffer with a capacity of 1024, I will get back one
that actually uses 2048 bytes (stored in maxLength).

Aligning to powers of two for book keeping ease is reasonable,
and if someone tries to expand a buffer, you might as well use some
of the previously wasted space. However, since this distinction
between 'easily expanded' and 'costly to expand' space is not
supported at all by the APIs, I cannot imagine this change to
doubling is desirable or intentional.

This is especially costly when using composite buffers. They
frequently allocate components with a capacity that is a power of
2, and they never attempt to expand components themselves. The end
result is that heavy use of pool-backed composite buffers wastes
almost half of the memory pool (the smaller / initial components are
<512 and so are not affected by the off-by-one bug).

Modifications:

Although I find it difficult to believe that such an optimization
is really helpful, I left it in and fixed the off-by-one issue by
decrementing the value at the start.

I also added a simple test to both attempt to verify that the
decrement fixes the issue without introducing any other change, and
to make it easy for a reviewer to test the existing behavior. PoolArena
does not seem to have much testing or testability support though so
the test is kind of a hack and will break for unrelated changes. I
suggest either removing it or factoring out the single non-static
portion of normalizeCapacity so that the fragile dummy PoolArena is
not required.

Result:

Pooled allocators will allocate less resources to the highly
inefficient and undocumented buffer section between length and
maxLength.

Composite buffers of non-trivial size that are backed by pooled
allocators will use about half as much memory.
2014-04-15 07:03:13 +02:00
Norman Maurer
ceffa82d0d [#2370] Periodically check for not alive Threads and free up their ThreadPoolCache
Motivation:
At the moment we create new ThreadPoolCache whenever a Thread tries either allocate or release something on the PooledByteBufAllocator. When something is released we put it then in its ThreadPoolCache. The problem is we never check if a Thread is not alive anymore and so we may end up with memory that is never freed again if a user create many short living Threads that use the PooledByteBufAllocator.

Modifications:
Periodically check if the Thread is still alive that has a ThreadPoolCache assinged and if not free it.

Result:
Memory is freed up correctly even for short living Threads.
2014-04-09 11:45:11 +02:00
Norman Maurer
8429ecfcc4 Implement Thread caches for pooled buffers to minimize conditions. This fixes [#2264] and [#808].
Motivation:
Remove the synchronization bottleneck in PoolArena and so speed up things

Modifications:

This implementation uses kind of the same technics as outlined in the jemalloc paper and jemalloc
blogpost https://www.facebook.com/notes/facebook-engineering/scalable-memory-allocation-using-jemalloc/480222803919.

At the moment we only cache for "known" Threads (that powers EventExecutors) and not for others to keep the overhead
minimal when need to free up unused buffers in the cache and free up cached buffers once the Thread completes. Here
we use multi-level caches for tiny, small and normal allocations. Huge allocations are not cached at all to keep the
memory usage at a sane level. All the different cache configurations can be adjusted via system properties or the constructor
directly where it makes sense.

Result:
Less conditions as most allocations can be served by the cache itself
2014-03-20 09:30:57 -07:00
Trustin Lee
19422972e3 Fix and simplify freeing a direct buffer / Fix Android support
Motivation:

6e8ba291cf introduced a regression in Android because Android does not have sun.nio.ch.DirectBuffer (see #2330.)  I also found PlatformDependent0.freeDirectBuffer() and freeDirectBufferUnsafe() are pretty much same after the commit and the unsafe version should be removed.

Modifications:

- Do not use the pooled allocator in Android because it's too resource hungry for Androids.
- Merge PlatformDependent0.freeDirectBuffer() and freeDirectBufferUnsafe() into one method.
- Make the Unsafe unavailable when sun.nio.ch.DirectBuffer is unavailable.  We could keep the Unsafe available and handle the sun.nio.ch.DirectBuffer case separately, but I don't want to complicate our code just because of that.  All supported JDK versions have sun.nio.ch.DirectBuffer if the Unsafe is available.

Result:

Simpler code. Fixes Android support (#2330)
2014-03-20 11:11:07 +09:00
Jakob Buchgraber
1bce46dbb3 Bit tricks to check for and calculate power of two.
Motivation:
I was studying the code and thought this was simpler and easier to
understand.

Modifications:
Replaced the for loop and if conditions, with a simple implementation.

Result:
Code is easier to understand.
2014-03-18 15:59:34 +09:00
Bourne, Geoff
1334d34e9d Fix limit computation of NIO ByteBuffers obtained via ReadOnlyByteBufferBuf.nioBuffer
Motivation:

When starting with a read-only NIO buffer, wrapping it in a ByteBuf,
and then later retrieving a re-wrapped NIO buffer the limit was getting
too short.

Modifications:

Changed ReadOnlyByteBufferBuf.nioBuffer(int,int) to compute the
limit in the same manner as the internalNioBuffer method.

Result:

Round-trip conversion from NIO to ByteBuf to NIO will work reliably.
2014-03-14 08:10:18 +01:00
Trustin Lee
fbd4385506 Determine the default allocator from system property
- Add ByteBufAllocator.DEFAULT
- The default allocator is now 'pooled'
2014-02-14 13:04:12 -08:00
Trustin Lee
dea5c688fd Fix checkstyle 2014-02-13 18:51:32 -08:00
Trustin Lee
ac70dc4546 Update the version to 4.1.0.Alpha1-SNAPSHOT 2014-02-13 18:32:26 -08:00
Trustin Lee
51349352e2 Fix a bug that CompositeByteBuf.touch() does nothing 2014-02-13 18:24:36 -08:00
Trustin Lee
8837afddf8 Enable a user specify an arbitrary information with ReferenceCounted.touch()
- Related: #2163
- Add ResourceLeakHint to allow a user to provide a meaningful information about the leak when touching it
- DefaultChannelHandlerContext now implements ResourceLeakHint to tell where the message is going.
- Cleaner resource leak report by excluding noisy stack trace elements
2014-02-13 18:16:25 -08:00
Trustin Lee
45e70d9935 Add ReferenceCounted.touch() / Add missing retain() overrides
- Fixes #2163
- Inspector warnings
2014-02-13 18:10:11 -08:00
Trustin Lee
2b84314fdd Add Recycler.Handle.recycle() so that it's possible to recycle an object without an explicit reference to Recycler 2014-02-13 17:24:37 -08:00
Trustin Lee
86c4166c24 Fixed various buffer leaks in FixedCompositeByteBufTest 2014-02-13 17:03:13 -08:00
Trustin Lee
26fc84529f Also record retain() and release() 2014-02-13 16:58:45 -08:00
Norman Maurer
2351b8ddd9 Add FixedCompositeByteBuf which can be used to write an array of ByteBuf in an efficient way.
This implementation does not produce as much GC pressure as CompositeByteBuf and so is prefered,
for writing an array of ByteBufs. Be aware that FixedCompositeByteBuf is readonly.

When using this in a project that make heavy use of CompositeByteBuf for writes we was able to cut
down allocation to a half.
2014-02-13 16:52:31 -08:00
Trustin Lee
40003ed250 Resurrect Channel.id() with global uniqueness
- Fixes #1810
- Add a new interface ChannelId and its default implementation which generates globally unique channel ID.
- Replace AbstractChannel.hashCode with ChannelId.hashCode() and ChannelId.shortValue()
- Add variants of ByteBuf.hexDump() which accept byte[] instead of ByteBuf.
2014-02-13 15:53:07 -08:00
Trustin Lee
ef4bc99849 Remove unnecessary parenthesis 2014-02-13 15:52:06 -08:00
Norman Maurer
f23d68b42f [#2187] Always do a volatile read on the refCnt 2014-02-07 09:23:16 +01:00
Norman Maurer
9bee78f91c Provide an optimized AtomicIntegerFieldUpdater, AtomicLongFieldUpdater and AtomicReferenceFieldUpdater 2014-02-06 20:08:45 +01:00
Norman Maurer
d67184b488 [maven-release-plugin] prepare for next development iteration 2014-01-21 08:18:32 +01:00
Norman Maurer
287515210d [maven-release-plugin] prepare release netty-4.0.15.Final 2014-01-21 08:18:26 +01:00
Trustin Lee
e83d2e0b4e [maven-release-plugin] prepare for next development iteration 2013-12-22 21:57:48 +09:00
Trustin Lee
cdb700c7a4 [maven-release-plugin] prepare release netty-4.0.14.Final 2013-12-22 21:57:40 +09:00
Trustin Lee
0b7aedb13b [maven-release-plugin] rollback the release of netty-4.0.14.Final 2013-12-22 21:53:24 +09:00
Trustin Lee
4bf6ec7171 [maven-release-plugin] prepare release netty-4.0.14.Final 2013-12-22 21:52:56 +09:00
Trustin Lee
9c1a49c58e [maven-release-plugin] rollback the release of netty-4.0.14.Final 2013-12-22 21:47:35 +09:00
Trustin Lee
008a049bf4 [maven-release-plugin] prepare for next development iteration 2013-12-22 21:43:55 +09:00
Trustin Lee
f6cb9088c6 [maven-release-plugin] prepare release netty-4.0.14.Final 2013-12-22 21:43:45 +09:00
Norman Maurer
b3d8c81557 Fix all leaks reported during tests
- One notable leak is from WebSocketFrameAggregator
- All other leaks are from tests
2013-12-07 00:44:56 +09:00
Trustin Lee
2102cb062b Fix false-positive leaks
- All derived buffers and swapped buffers of a leak-aware buffer must be wrapped again with the leak-aware buffer
2013-12-06 21:32:56 +09:00
Trustin Lee
e506581eb1 Add ReferenceCountUtil.releaseLater() to make writing tests easy with ReferenceCounteds 2013-12-06 15:13:00 +09:00
Trustin Lee
128c4b96b5 Checkstyle 2013-12-06 13:54:36 +09:00
Trustin Lee
5d39b1fc3d Also record retain() and release() 2013-12-06 13:45:24 +09:00
Trustin Lee
e88172495a Ensure backward compatibility
.. by resurrecting the removed methods and system properties.
2013-12-05 01:02:38 +09:00
Trustin Lee
65b522a2a7 Better buffer leak reporting
- Remove the reference to ResourceLeak from the buffer implementations
  and use wrappers instead:
  - SimpleLeakAwareByteBuf and AdvancedLeakAwareByteBuf
  - It is now allocator's responsibility to create a leak-aware buffer.
  - Added AbstractByteBufAllocator.toLeakAwareBuffer() for easier
    implementation
- Add WrappedByteBuf to reduce duplication between *LeakAwareByteBuf and
  UnreleasableByteBuf
- Raise the level of leak reports to ERROR - because it will break the
  app eventually
- Replace enabled/disabled property with the leak detection level
  - Only print stack trace when level is ADVANCED or above to avoid user
    confusion
- Add the 'leak' build profile, which enables highly detailed leak
  reporting during the build
- Remove ResourceLeakException which is unsed anymore
2013-12-05 00:51:39 +09:00
Norman Maurer
053c512f6d Fix checkstyle 2013-12-02 08:23:57 +01:00
Norman Maurer
14600167d6 [#2021] No need to synchronize for unpooled chunks 2013-12-02 08:02:48 +01:00
Norman Maurer
17f5865e38 [maven-release-plugin] prepare for next development iteration 2013-11-29 19:31:01 +01:00
Norman Maurer
ead617fdcc [maven-release-plugin] prepare release netty-4.0.14.Beta1 2013-11-29 19:30:55 +01:00
Norman Maurer
6cf2748dbb [maven-release-plugin] prepare for next development iteration 2013-11-28 15:04:51 +01:00
Norman Maurer
5fe7596f49 [maven-release-plugin] prepare release netty-4.0.13.Final 2013-11-28 15:04:46 +01:00
Trustin Lee
407f0a36f5 Simplify bundle generation / Add io.netty.versions.properties to all JARs
- Fixes #2003 properly
- Instead of using 'bundle' packaging, use 'jar' packaging.  This is
  more robust because some strict build tools fail to retrieve the
  artifacts from a Maven repository unless their packaging is not 'jar'.
- All artifacts now contain META-INF/io.netty.version.properties, which
  provides the detailed information about the build and repository.
- Removed OSGi testsuite temporarily because it gives false errors
  during split package test and examination.
- Add io.netty.util.Version for easy retrieval of version information
2013-11-26 22:01:46 +09:00
Norman Maurer
7231be592a Also allow to override how direct ByteBuffers are freed 2013-11-12 12:40:41 +01:00
Norman Maurer
e83fb821d5 Allow to override how wrapped direct ByteBuffer are allocated to make it easier to extend 2013-11-12 12:13:38 +01:00
Norman Maurer
b00f8c6390 [#1976] Fix IndexOutOfBoundsException when calling CompositeByteBuf.discardReadComponents() 2013-11-09 20:13:24 +01:00
Alex Petrov
e4f391f626 Improve docstrings for and of 2013-11-08 12:15:41 +01:00
Trustin Lee
ba3bc0c020 Simpler toString() for ByteBufAllocators 2013-11-08 17:54:34 +09:00
Norman Maurer
db78581bbb [maven-release-plugin] prepare for next development iteration 2013-11-07 18:11:45 +01:00
Norman Maurer
2386777af8 [maven-release-plugin] prepare release netty-4.0.12.Final 2013-11-07 18:11:38 +01:00
Norman Maurer
77b4ec7e1b [#1800] [#1802] Correctly expand capacity of ByteBuf while preserve content 2013-11-04 15:18:21 +01:00
Trustin Lee
54db9ec725 Use StringUtil.simpleClassName(..) instead of Class.getSimpleName() where necessary
- Class.getSimpleName() doesn't render anonymous classes very well
- + some minor cleanup
2013-11-04 19:46:15 +09:00
Norman Maurer
4ce49a6195 [#1943] Unpooled.copiedBuffer(ByteBuf pooled) should always return unpooled ByteBuf 2013-10-22 20:20:38 +02:00
Norman Maurer
ceab146b54 [maven-release-plugin] prepare for next development iteration 2013-10-21 07:43:42 +02:00
Norman Maurer
27a89d6032 [maven-release-plugin] prepare release netty-4.0.11.Final 2013-10-21 07:41:49 +02:00
Norman Maurer
68b616728a [#1925] Only expose sub-region of ByteBuf on nioBuffer(...) 2013-10-16 10:34:33 +02:00
Norman Maurer
d946659520 [#1906] Use a ByteBuf allocator from the ByteBufAllocator when encode Strings 2013-10-09 21:18:08 +02:00
Norman Maurer
1c73be21fc Remove redundant index check 2013-10-08 07:21:01 +02:00
Bill Gallagher
8f612660b2 disable debugging output during test 2013-10-04 06:45:26 +02:00
Norman Maurer
d7da19f745 [maven-release-plugin] prepare for next development iteration 2013-10-02 15:48:52 +02:00
Norman Maurer
d35768ae11 [maven-release-plugin] prepare release netty-4.0.10.Final 2013-10-02 15:48:45 +02:00
Norman Maurer
ee192f0321 [#1880] Use ByteBufAllocator when read bytes into new chunks 2013-10-01 10:10:43 +02:00
Norman Maurer
6d09e57be7 [#1875] Correctly check the readerIndex when try to read a byte from AbstractByteBuf 2013-09-30 14:47:49 +02:00
Norman Maurer
b4fa8af079 Cache underlying ByteBuffers and count in ChannelOutboundBuffer.Entry to reduce object creation and so GC pressure
Beside this it also helps to reduce CPU usage as nioBufferCount() is quite expensive when used on CompositeByteBuf which are
nested and contains a lot of components
2013-09-26 20:37:39 +02:00
Norman Maurer
2b9a07cac9 CompositeByteBuf.isDirect() should return true if its only backed by direct buffers 2013-09-26 20:37:31 +02:00
Norman Maurer
a74149e984 [#1865] Only use internalNioBuffer when one of the read* or write* methods are used. This is neccessary to prevent races as those can happen when a slice or duplicate is shared between different Channels
that are not assigned to the same EventLoop. In general get* operations should always be safe to be used from different Threads.

This aslo include unit tests that show the issue
2013-09-25 17:27:26 +02:00
Norman Maurer
910ed31a1b [#1851] EmptyByteBuf.isWritable(..) and isReadable(...) should not throw IndexOutOfBoundsException 2013-09-21 20:40:22 +02:00
Norman Maurer
23baef8fb4 [#1853] Optimize gathering writes for CompositeByteBuf that are only backed by one ByteBuffer 2013-09-19 07:29:58 +02:00
Norman Maurer
c0bbde48b7 [#1852] Fix bug in UnpooledDirectByteBuf.nioBuffer(...) implementation 2013-09-18 20:47:57 +02:00
Greg Soltis
f1d4f813ed Fix nioBuffer implementation for CompositeByteBuf 2013-09-16 06:41:08 +02:00
Norman Maurer
451e91d142 [#1821] Fix IndexOutOfBoundsException which was thrown if the last component was removed but other components was left 2013-09-09 20:29:30 +02:00
Norman Maurer
ffab456aca Bump up version to reflect correct one 2013-09-09 11:20:12 +02:00
Norman Maurer
363531caf9 [maven-release-plugin] rollback the release of netty-4.0.9.Final 2013-09-06 09:18:34 +02:00
Norman Maurer
9d53573ee8 [maven-release-plugin] prepare for next development iteration 2013-09-06 09:17:15 +02:00
Norman Maurer
25c226a835 Make sure only direct ByteBuffer are passed to the underlying jdk Channel.
This is needed because of otherwise the JDK itself will do an extra ByteBuffer copy with it's own pool implementation. Even worth it will be done
multiple times if the ByteBuffer is always only partial written. With this change the copy is done inside of netty using it's own allocator and
only be done one time in all cases.
2013-09-02 20:17:53 +02:00
Norman Maurer
5416f2315e [#1797] No use internalNioBuffer() in derived buffers as it is not meant for concurrent access 2013-09-02 14:15:19 +02:00
Norman Maurer
0007fb81ef Add tests to try to track down some buffer issues 2013-09-02 13:50:47 +02:00
Norman Maurer
795182843d Remove legancy code which we not need anymore as we use gathering writes anyway everywhere 2013-09-01 11:00:58 +02:00
Norman Maurer
5ddd7cee90 [#1797] Throw IllegalArgumentException if AbstractByteBuf.skipBytes(...) is used with a negative value 2013-08-29 11:14:36 +02:00
Norman Maurer
2e39b25cd4 [maven-release-plugin] prepare for next development iteration 2013-08-26 12:01:03 +02:00
Norman Maurer
b67659a866 [maven-release-plugin] prepare release netty-4.0.8.Final 2013-08-26 12:00:54 +02:00
Trustin Lee
20894bc99e Fix a bug in internalNioBuffer() implementations of derived buffers
- A user can create multiple duplicates of a buffer and access their internal NIO buffers. (e.g. write multiple duplicates to multiple channels assigned to different event loop.)  Because the derived buffers' internalNioBuffer() simply delegates the call to the original buffer, all derived buffers and the original buffer's internalNioBuffer() will return the same buffer, which will lead to a race condition.
- Fixes #1739
2013-08-20 14:28:50 +09:00
bgallagher
9f88552f12 remove some dead code 2013-08-10 20:46:48 +02:00
Norman Maurer
1d3560e389 [maven-release-plugin] prepare for next development iteration 2013-08-08 13:53:28 +02:00
Norman Maurer
8e97e6c461 [maven-release-plugin] prepare release netty-4.0.7.Final 2013-08-08 13:53:19 +02:00
Norman Maurer
194b64cff1 [#1708] Correctly set the writerIndex in ReadOnlyByteBufferBuf if it is constructed with a buffer which has non zero position 2013-08-08 06:54:32 +02:00
Norman Maurer
ea1dca8105 [#1704] Make sure SwappedByteBuf.readSlice(..) returns ByteBuf with correct ByteOrder 2013-08-06 12:22:22 +02:00
Norman Maurer
3f2000fa3a [maven-release-plugin] prepare for next development iteration 2013-08-01 10:59:55 +02:00
Norman Maurer
3f70d5caa4 [maven-release-plugin] prepare release netty-4.0.6.Final 2013-08-01 10:59:46 +02:00
Norman Maurer
e3410680de [maven-release-plugin] prepare for next development iteration 2013-07-31 20:08:14 +02:00
Norman Maurer
0e124583d6 [maven-release-plugin] prepare release netty-4.0.5.Final 2013-07-31 20:08:05 +02:00
Norman Maurer
8a673db92b [#1644] Fixed IndexOutOfBoundException when calling copy() on a empty CompositeByteBuf 2013-07-24 07:35:51 +02:00
Norman Maurer
0bc7d3f5d1 [maven-release-plugin] prepare for next development iteration 2013-07-23 10:04:23 +02:00
Norman Maurer
ca00182797 [maven-release-plugin] prepare release netty-4.0.4.Final 2013-07-23 10:04:14 +02:00
Trustin Lee
764741c5ce Change the contract of ResourceLeakDetector.open() so that unsampled resources are recycled
- This also fixes the problem introduced while trying to implement #1612 (Allow to disable resource leak detection).
2013-07-23 14:06:58 +09:00
Norman Maurer
35802207e1 Fix compile error 2013-07-23 06:42:41 +02:00
kerr
ada07cb9e0 Fix types in javadocs 2013-07-22 19:14:36 +02:00
Norman Maurer
f478fcd3b0 [#1628] Fix bug in ReadOnlyByteByteBufferBuf where get operations threw ReadOnlyBufferException 2013-07-22 07:12:05 +02:00
Norman Maurer
feb8d101bd [#1626] Use static fields for default values 2013-07-22 06:47:29 +02:00
Shawn Silverman
674f4bce51 netty-1597: Rewrite ByteBufInputStream.readLine() to avoid IndexOutOfBoundsException and to behave more correctly for lines ending in '\r'. 2013-07-20 08:05:54 +02:00
Trustin Lee
b130ee6a6c [maven-release-plugin] prepare for next development iteration 2013-07-18 11:17:42 +09:00
Trustin Lee
10d395e829 [maven-release-plugin] prepare release netty-4.0.3.Final 2013-07-18 11:17:31 +09:00
Trustin Lee
f0a3f849f7 Fix a bug in AbstractByteBuf.writeZero() where the capacity is not auto-expanded 2013-07-18 09:55:02 +09:00
Norman Maurer
fc7c950b08 [maven-release-plugin] prepare for next development iteration 2013-07-17 15:58:36 +02:00
Norman Maurer
bbbf72359e [maven-release-plugin] prepare release netty-4.0.2.Final 2013-07-17 15:58:28 +02:00
Trustin Lee
57eb531eb8 [maven-release-plugin] prepare for next development iteration 2013-07-16 17:16:10 +09:00
Trustin Lee
76cefcc421 [maven-release-plugin] prepare release netty-4.0.1.Final 2013-07-16 17:15:54 +09:00
Norman Maurer
5297eba280 [maven-release-plugin] prepare for next development iteration 2013-07-15 15:48:15 +02:00
Norman Maurer
c5d8af446a [maven-release-plugin] prepare release netty-4.0.0.Final 2013-07-15 15:48:05 +02:00
Trustin Lee
246a3ecdcb [maven-release-plugin] prepare for next development iteration 2013-07-15 20:58:33 +09:00
Trustin Lee
e8fd209115 [maven-release-plugin] prepare release netty-4.0.0.Final 2013-07-15 20:58:21 +09:00
Norman Maurer
df5daadd0f Remove unused import 2013-07-15 10:09:17 +02:00
Norman Maurer
7254a5c2c6 Just some tiny javadocs optimizations 2013-07-14 16:02:03 +02:00
Trustin Lee
65c2a6ed46 Make ByteBuf an abstract class rather than an interface
- 5% improvement in throughput (HelloWorldServer example)
- Made CompositeByteBuf a concrete class (renamed from DefaultCompositeByteBuf) because there's no multiple inheritance in Java

Fixes #1536
2013-07-08 14:59:52 +09:00
Norman Maurer
086ae3536c [#1533] Introduce ByteBufHolder.duplicate() and make use of it in DefaultChannelGroup.write(...) 2013-07-06 21:17:51 +02:00
Norman Maurer
7dda4b9ce4 [#1532] Remove @deprecated ByteBufIndexFinder and all methods that take it as argument 2013-07-06 20:14:53 +02:00
Trustin Lee
dfc05a6ed7 Fix documentation error in ByteBuf
- Fixes #1531
- Thanks to @daschl
2013-07-05 17:03:34 +09:00
Trustin Lee
0b9235f072 Simplify ByteBufProcessor and MessageListProcessor and Add internal component accessors to CompositeByteBuf
- Fixes #1528

It's not really easy to provide a general-purpose abstraction for fast-yet-safe iteration. Instead of making forEachByte() less optimal, let's make it do what it does really well, and allow a user to implement potentially unsafe-yet-fast loop using unsafe operations.
2013-07-05 14:00:46 +09:00
Norman Maurer
7ec12d327f Remove deprecated ByteBufUtil.release(..) and ByteBufUtil.retain(..) methods and its usage. Also fix a problem where an object would have been released two times.
* The problem with the release(..) calls here was that it would have called release on an unsupported message and then throw an exception. This exception will trigger ChannelOutboundBuffer.fail(..), which will also try to release the message again.
* Also use the same exception type for unsupported messages as in other channel impls.
2013-07-03 10:00:13 +02:00
Norman Maurer
ec5e793a2f [maven-release-plugin] prepare for next development iteration 2013-07-02 11:41:18 +02:00
Norman Maurer
ca73eaef0d [maven-release-plugin] prepare release netty-4.0.0.CR9 2013-07-02 11:41:09 +02:00
Norman Maurer
830c559405 [maven-release-plugin] rollback the release of netty-4.0.0.CR9 2013-07-02 11:34:29 +02:00
Norman Maurer
66a16b133c [maven-release-plugin] prepare release netty-4.0.0.CR9 2013-07-02 10:45:12 +02:00
Trustin Lee
7e3a01cc51 [maven-release-plugin] prepare for next development iteration 2013-07-02 10:26:48 +09:00
Trustin Lee
149db34c19 [maven-release-plugin] prepare release netty-4.0.0.CR8 2013-07-02 10:26:32 +09:00
Trustin Lee
4b11aff08f Less confusing log messages for system properties
- Fixes #1502
2013-07-02 09:23:29 +09:00
Norman Maurer
5d88c423df [#1500] Remove @deprecated methods 2013-07-01 08:53:02 +02:00
Trustin Lee
613547b0b9 [maven-release-plugin] prepare for next development iteration 2013-06-28 22:15:33 +09:00
Trustin Lee
a6abd2feb2 [maven-release-plugin] prepare release netty-4.0.0.CR7 2013-06-28 22:15:20 +09:00
Trustin Lee
0dcf352f4c Vastly simplified ByteBufProcessor and MessageListProcessor
- Related: #1378
- They now accept only one argument.
- A user who wants to use a buffer for more complex use cases, he or she can always access the buffer directly via memoryAddress() and array()
2013-06-28 20:29:00 +09:00
Trustin Lee
52691488ee Update Javadoc of ByteBufProcessor and MessageListProcessor
- in response to @shacharo's suggestion
2013-06-27 19:01:01 +09:00
Trustin Lee
ac39cad5ff Split ByteBuf.forEachByte() into forEachByte() and forEachByteDesc()
- Related: #1378
- As suggested by @liqweed
2013-06-27 18:48:09 +09:00
Trustin Lee
9804741fb3 Fix test failure in SlicedByteBuf / Add tests for built-in ByteBufProcessor impls
- Related: #1378
2013-06-27 17:49:46 +09:00
Trustin Lee
98531313de Optimize derived buffers' forEachByte(...) implementation
- Related: #1378
2013-06-27 17:36:22 +09:00
Trustin Lee
b5bb36c087 Use (fromIndex, toIndex) instead of (index, length) for ByteBuf.forEachByte(...)
- Related: #1378
2013-06-27 17:30:19 +09:00
Trustin Lee
792edf631c Deprecate ByteBufIndexFinder
- Prefer ByteBufProcessor
- Related: #1378
2013-06-27 14:26:58 +09:00
Trustin Lee
4dd9b6ef2e Add ByteBufProcessor and ByteBuf.forEach(...)
- Fixes #1378
- Needs to provide optimized forEach implementations though.
2013-06-27 13:55:42 +09:00
Norman Maurer
58b968b603 [#1454] Fix IndexOutOfBoundsException which was thrown if last component of a CompositeByteBuf was removed 2013-06-25 09:32:00 +02:00
Trustin Lee
dbab41cc50 Improve the utilization of subpage pools
.. by avoiding the overly frequent removal of a subpage from a pool

This change makes sure that the unused subpage is not removed when there's no subpage left in the pool.  If the last subpage is removed from the pool, it is very likely that the allocator will create a new subpage very soon again, so it's better not remove it.
2013-06-25 11:07:15 +09:00
Trustin Lee
a6795d7780 [maven-release-plugin] prepare for next development iteration 2013-06-25 11:07:15 +09:00
Trustin Lee
2221446425 [maven-release-plugin] prepare release netty-4.0.0.CR6 2013-06-25 11:07:15 +09:00
Trustin Lee
a2f232720b Make AdaptiveRecvByteBufAllocator's lookup table simpler / Optimize buffer size normalization
- No need to have fine-grained lookup table because the buffer pool has
  much more coarse capacities available
- No need to use a loop to normalize a buffer capacity
2013-06-25 11:07:14 +09:00
Norman Maurer
6a9f965f9b Introduce new utility class calles ReferenceCountUtil and move utility methods from ByteBufUtil to it.
The ones in ByteBufUtil were marked as @deprecated
2013-06-14 07:07:33 +02:00
Trustin Lee
a5871dfd86 [maven-release-plugin] prepare for next development iteration 2013-06-14 12:55:15 +09:00
Trustin Lee
f5377cc8d7 [maven-release-plugin] prepare release netty-4.0.0.CR5 2013-06-14 12:55:05 +09:00
Trustin Lee
0da48e7e7f Determine the default number of heap/direct arenas of PooledByteBufAllocator conservatively
- Fixes #1445
- Add PlatformDependent.maxDirectMemory()
- Ensure the default number or arenas is decreased if the max memory of the VM is not large enough.
2013-06-14 12:14:45 +09:00
Trustin Lee
e5ca6518ba [maven-release-plugin] prepare for next development iteration 2013-06-13 17:02:32 +09:00
Trustin Lee
381063e09c [maven-release-plugin] prepare release netty-4.0.0.CR4 2013-06-13 17:02:19 +09:00
Trustin Lee
6d1cd0d0cd ReferenceCountException -> IllegalReferenceCountException 2013-06-13 14:00:15 +09:00
Trustin Lee
7eb0f6105d Fix memory leaks 2013-06-13 13:32:47 +09:00
Trustin Lee
175526b6bd Move ReferenceCounted and AbstractReferenceCounted to io.netty.util
- Fixes #1441
- Also move and rename IllegalBufferAccessException to ReferenceCountException
- Prettier reference count exception messages
2013-06-13 13:14:21 +09:00
Trustin Lee
283feda119 Reduce even more garbage by exposing ByteBuf.internalNioBuffer() 2013-06-13 12:40:26 +09:00
Trustin Lee
2d7c6f8ee1 Make PooledByteBuf recyclable regardless its maxCapacity
- Make AbstractByteBuf.maxCapacity internally mutable so that PooledByteBuf is completely recyclable
2013-06-12 04:18:40 +09:00
Trustin Lee
9396246fe9 " " -> " " / Cleanup 2013-06-12 04:07:09 +09:00
Norman Maurer
341f7757aa Fix checkstyle 2013-06-11 16:12:34 +02:00
Norman Maurer
bf046492fb [#1439] Fix CompositeByteBuf.nioBufferCount() to return the correct number 2013-06-11 16:07:40 +02:00
Trustin Lee
bf5960e9eb Fix #1435 and #1436 by reverting 7f7bf304b0
Different PooledByteBufs can have the reference to the same PooledChunk (and its ByteBuffer), so it's incorrect not to create a duplicate.
2013-06-11 00:57:23 +09:00
Trustin Lee
7f7bf304b0 Optimize PooledUnsafeDirectByteBuf.newInternalNioBuffer()
- No need to produce garbage
2013-06-10 22:08:30 +09:00
Trustin Lee
6732c6761b Recycle PooledByteBuf partially
- Related issue: #1397
- Resource leak detection should be turned off and the maxCapacity has to be Integer.MAX_VALUE
- It's technically possible to pool PooledByteBufs with different maxCapacity, which will be addressed in another commit.
2013-06-10 19:52:56 +09:00
Derek Troy-West
f2d8a745b1 [#1422] ReadOnlyByteBuffer.isWritable() should return false 2013-06-10 09:23:57 +02:00
Trustin Lee
14158070bf Revamp the core API to reduce memory footprint and consumption
The API changes made so far turned out to increase the memory footprint
and consumption while our intention was actually decreasing them.

Memory consumption issue:

When there are many connections which does not exchange data frequently,
the old Netty 4 API spent a lot more memory than 3 because it always
allocates per-handler buffer for each connection unless otherwise
explicitly stated by a user.  In a usual real world load, a client
doesn't always send requests without pausing, so the idea of having a
buffer whose life cycle if bound to the life cycle of a connection
didn't work as expected.

Memory footprint issue:

The old Netty 4 API decreased overall memory footprint by a great deal
in many cases.  It was mainly because the old Netty 4 API did not
allocate a new buffer and event object for each read.  Instead, it
created a new buffer for each handler in a pipeline.  This works pretty
well as long as the number of handlers in a pipeline is only a few.
However, for a highly modular application with many handlers which
handles connections which lasts for relatively short period, it actually
makes the memory footprint issue much worse.

Changes:

All in all, this is about retaining all the good changes we made in 4 so
far such as better thread model and going back to the way how we dealt
with message events in 3.

To fix the memory consumption/footprint issue mentioned above, we made a
hard decision to break the backward compatibility again with the
following changes:

- Remove MessageBuf
- Merge Buf into ByteBuf
- Merge ChannelInboundByte/MessageHandler and ChannelStateHandler into ChannelInboundHandler
  - Similar changes were made to the adapter classes
- Merge ChannelOutboundByte/MessageHandler and ChannelOperationHandler into ChannelOutboundHandler
  - Similar changes were made to the adapter classes
- Introduce MessageList which is similar to `MessageEvent` in Netty 3
- Replace inboundBufferUpdated(ctx) with messageReceived(ctx, MessageList)
- Replace flush(ctx, promise) with write(ctx, MessageList, promise)
- Remove ByteToByteEncoder/Decoder/Codec
  - Replaced by MessageToByteEncoder<ByteBuf>, ByteToMessageDecoder<ByteBuf>, and ByteMessageCodec<ByteBuf>
- Merge EmbeddedByteChannel and EmbeddedMessageChannel into EmbeddedChannel
- Add SimpleChannelInboundHandler which is sometimes more useful than
  ChannelInboundHandlerAdapter
- Bring back Channel.isWritable() from Netty 3
- Add ChannelInboundHandler.channelWritabilityChanges() event
- Add RecvByteBufAllocator configuration property
  - Similar to ReceiveBufferSizePredictor in Netty 3
  - Some existing configuration properties such as
    DatagramChannelConfig.receivePacketSize is gone now.
- Remove suspend/resumeIntermediaryDeallocation() in ByteBuf

This change would have been impossible without @normanmaurer's help. He
fixed, ported, and improved many parts of the changes.
2013-06-10 16:10:39 +09:00
Norman Maurer
bc20107b68 Use correct value to disable/enable direct arenas in PooledByteBufAllocator 2013-05-30 20:24:11 +02:00
Norman Maurer
81e3c1719a [maven-release-plugin] prepare for next development iteration 2013-05-18 09:59:13 +02:00
Norman Maurer
99caefdf39 [maven-release-plugin] prepare release netty-4.0.0.CR3 2013-05-18 09:57:11 +02:00
Trustin Lee
f92cfba388 Remove DefaultCompositeByteBuf.lastAccessed and use binary search instead
- Fixes #1364
- Even if a user creates a duplicate/slice, lastAccessed was shared between the derived buffers and it's updated even by a read operation, which made multithread access impossible
2013-05-17 16:54:47 +09:00
Norman Maurer
c43950a03f [maven-release-plugin] prepare for next development iteration 2013-05-08 18:19:51 +02:00
Norman Maurer
ae76502040 [maven-release-plugin] prepare release netty-4.0.0.CR2 2013-05-08 18:19:38 +02:00
Trustin Lee
2a15f658d6 Ensure UnreleasableByteBuf does not expose the wrapped buffer to the caller
- Fixes #1324
2013-05-01 20:43:23 +09:00
Trustin Lee
1e0c83db23 Introduce AddressedEnvelope message type for generic representation of an addressed message
- Fixes #1282 (not perfectly, but to the extent it's possible with the current API)
- Add AddressedEnvelope and DefaultAddressedEnvelope
- Make DatagramPacket extend DefaultAddressedEnvelope<ByteBuf, InetSocketAddress>
- Rename ByteBufHolder.data() to content() so that a message can implement both AddressedEnvelope and ByteBufHolder (DatagramPacket does) without introducing two getter methods for the content
- Datagram channel implementations now understand ByteBuf and ByteBufHolder as a message with unspecified remote address.
2013-05-01 17:04:43 +09:00
Trustin Lee
2e0dd65250 Fix a bug where the unpooled buffer returned by the pooled allocator reports an incorrect allocator 2013-05-01 11:14:21 +09:00
Trustin Lee
a218eb6f6f Allow to disable only heap or direct buffer pool
- Fixes #1315

If a user specifies the arena size of 0, the pool is now disabled
instead of raising an IllegalArgumentException. Using this, you can
disable only heap or direct buffer pool easily. Once disabled,
PooledByteBufAllocator will delegate the allocation request to
UnpooledByteBufAllocator.
2013-04-27 08:55:16 +09:00
Trustin Lee
b5989e2449 Reduce exception instantiation overhead in SslHandler / Reduce unnecessary empty array creation
- Added EmptyArrays as an internal utility class
2013-04-24 09:32:53 +09:00
Trustin Lee
32fa4c07f3 Do not unwrap a CompositeByteBuf when it is added as a component of another CompositeByteBuf
.. because Reference counting introduces life cycle issues to the CompositeByteBuf being added.

 - Fixes #1266
2013-04-23 21:53:51 +09:00
Trustin Lee
87007d4eb8 Fix another memory leak in AbstractByteBufTest 2013-04-23 13:46:34 +09:00
Norman Maurer
9a5f45a0c1 [#1297] Make sure ResourceLeakDetector.open(...) is only used after constructing was successful 2013-04-22 10:07:22 +02:00
Norman Maurer
ab685de7a3 [#1273] Fix resource leaks in test 2013-04-22 09:47:44 +02:00
Trustin Lee
18dca2a8a4 Fix checkstyle 2013-04-19 04:37:51 +09:00
Trustin Lee
8884e311f1 Fix a bug where DefaultCompositeByteBuf.nioBuffers() fails when its component's nioBufferCount() is greater than 1
- Fixes #1267
2013-04-19 04:35:44 +09:00
Trustin Lee
9e890f0ab8 Ensure to release the component when it's removed from CompositeByteBuf / Add tests for reference counting of CompositeByteBuf 2013-04-18 16:40:22 +09:00
Trustin Lee
5bfb408b7d Add setRefCnt(int) method to AbstractReferenceCounted(ByteBuf)
- Fixes #1265
2013-04-11 19:36:27 +09:00
Norman Maurer
3b8673733e [#1262] Respect adjustment when using SlicedByteBuf.nioBuffers() 2013-04-10 14:19:03 +02:00
Norman Maurer
d34daebeca [#1238] Correctly log the content of the MessageBuf and not depend on MessageBuf.toString()
Add an extra static method to BufUtil which will convert the content of any MessaBuf implementation to a String
2013-04-08 09:45:00 +02:00
Andrei Pozolotin
a3e760a003 fix #1234 - duplicate package-info.java errors in eclipse requires release of netty-build v 19 and netty-parent update. 2013-04-05 05:38:05 +09:00
Trustin Lee
0ac31ae846 Make Unpooled*ByteBuf public so that ByteBufAllocator implementor can extend it 2013-04-04 17:26:14 +09:00
Norman Maurer
94ef7dc1b9 Optimize to minimize volatile reads to access next buffer in codec framework 2013-04-03 18:03:55 +02:00
Trustin Lee
c3559ddbda Fix misleading example in ByteBuf 2013-04-03 22:18:38 +09:00
Trustin Lee
baf9ecfe7b Fix IndexOutOfBoundsException raised when numHeapArenas and numDirectArenas differ
- Fixes #1227
2013-04-03 22:15:34 +09:00
Trustin Lee
8fef511390 Fix typo 2013-04-03 22:08:43 +09:00
Norman Maurer
af4b71a00e Remove special handling of Object[] in codec framework (a.k.a unfolding)
- Fixes #1229
- Primarily written by @normanmaurer and revised by @trustin

This commit removes the notion of unfolding from the codec framework
completely.  Unfolding was introduced in Netty 3.x to work around the
shortcoming of the codec framework where encode() and decode() did not
allow generating multiple messages.

Such a shortcoming can be fixed by changing the signature of encode()
and decode() instead of introducing an obscure workaround like
unfolding.  Therefore, we changed the signature of them in 4.0.

The change is simple, but backward-incompatible.  encode() and decode()
do not return anything.  Instead, the codec framework will pass a
MessageBuf<Object> so encode() and decode() can add the generated
messages into the MessageBuf.
2013-04-03 21:44:54 +09:00
Trustin Lee
2ffa083d3c Allow overriding the default allocator properties and log them / Prettier log 2013-04-03 12:08:01 +09:00
Prajwal Tuladhar
05850da863 enable checkstyle for test source directory and fix checkstyle errors 2013-03-30 13:18:57 +01:00
Adam Vandenberg
8e23ab6886 Fix typo in BufType javadoc 2013-03-29 21:47:55 +09:00
Norman Maurer
5a7f049fe2 [#1202] Fix javadoc 2013-03-28 10:01:26 +01:00
Norman Maurer
71727e42de [#1210] Allow to use derived buffers with DefaultBufferHolder and so fix broken SpdySessionHandler 2013-03-27 07:30:12 +01:00
Norman Maurer
f53db96a3e [#1198] Fix references to ChannelBuffer and ChannelBuffers 2013-03-25 11:06:58 +01:00
Norman Maurer
4eb0172251 [#1196] Make it clear that addComponent(..) of CompositeByteBuf does NOT increase the writerIndex 2013-03-25 10:58:50 +01:00
Norman Maurer
59012390f6 Fix version numbering 2013-03-25 08:01:11 +01:00
Norman Maurer
f136fb3673 [#1197] Add Unpooled.unreleasableBuffer(...) to create a unreleasable view on a ByteBuf) 2013-03-23 11:25:01 +01:00
Norman Maurer
c71dc9d4b6 [#1195] Fix Unpooled.wrappedBuffer(..) with non-direct read-only ByteBuffer 2013-03-23 10:57:07 +01:00
Norman Maurer
7d7b676eeb [maven-release-plugin] prepare for next development iteration 2013-03-22 15:20:35 +01:00
Norman Maurer
60fc7dac4d [maven-release-plugin] prepare release netty-4.0.0.CR1 2013-03-22 15:20:11 +01:00
Trustin Lee
28576aa41e Fix incorrect exception message
- Thanks @hepin1989
2013-03-22 16:07:10 +09:00
Trustin Lee
1bad0b48cf Fix memory leak in the test 2013-03-22 12:37:57 +09:00
Trustin Lee
6869a2bd23 Fix memory leak in AbstractCompositeByteBufTest 2013-03-22 09:01:28 +09:00
Norman Maurer
52c4e042d6 Correctly handle read-only direct ByteBuffer when wrap them 2013-03-22 06:49:57 +09:00
Trustin Lee
2a87950784 [maven-release-plugin] prepare for next development iteration 2013-03-16 18:41:36 +09:00
Trustin Lee
adfb29330b [maven-release-plugin] prepare release netty-4.0.0.Beta3 2013-03-16 18:40:59 +09:00
Trustin Lee
5fe2e7fc9d Fix more memory leaks in buffer tests 2013-03-14 17:21:31 +09:00
Trustin Lee
0f351d2c47 Fix memory leak in DefaultCompositeByteBuf when a component is another CompositeByteBuf / Allow retain() and release() on a derived buffer 2013-03-14 16:37:20 +09:00
Trustin Lee
60d9984db1 Fix memory leak in DefaultCompositeByteBuf when a component is another CompositeByteBuf 2013-03-14 16:06:38 +09:00
Trustin Lee
d2b137649d Fix more memory leaks in the buffer tests 2013-03-14 15:25:22 +09:00
Trustin Lee
b86d3d692a Fix a bug where AbstractByteBuf.order() doesn't return a swapped buffer if capacity is 0.
- Fixes #1152
2013-03-14 06:58:14 +09:00
Trustin Lee
5830875b42 Fix a memory leak in AbstractCompositeByteBufTest
- Fixed #1147
2013-03-13 15:09:26 +09:00
Trustin Lee
94a9096be5 Fix a memory leak in AbstractCompositeByteBufTest 2013-03-12 17:57:23 +09:00
Trustin Lee
b271774c90 Fix memory leak in UnpooledTest
- nothing critical. It's a test that leaks.  Not CompositeByteBuf implementation.
2013-03-12 16:49:14 +09:00
Trustin Lee
e1dd149ca6 Reschedule the streaming API for later
- Will release as a part of http_next
2013-03-12 13:08:10 +09:00
Trustin Lee
8f5eaaa740 Make StreamTest finish sooner to make CI happy 2013-03-11 09:46:36 +09:00
Trustin Lee
5d65bbc0a9 Add package-info.java for the Stream API / Print maven version on travis CI 2013-03-11 09:09:46 +09:00
Trustin Lee
32efba34d8 Initial implementation of the Streaming API
This pull request provides a framework for exchanging a very large
stream between handlers, typically between a decoder and an inbound
handler (or between a handler that writes a message and an encoder that
encodes that message).

For example, an HTTP decoder, previously, generates multiple
micro-messages to decode an HTTP message (i.e. HttpRequest +
HttpChunks). With the streaming API, The HTTP decoder can simply
generate a single HTTP message whose content is a Stream. And then the
inbound handler can consume the Stream via the buffer you created when
you begin to read the stream. If you create a buffer whose capacity is
bounded, you can handle a very large stream without allocating a lot of
memory. If you just want to wait until the whole content is ready, you
can also do that with an unbounded buffer.

The streaming API also supports a limited form of communication between
a producer (i.e. decoder) and a consumer. A producer can abort the
stream if the stream is not valid anymore. A consumer can choose to
reject or discard the stream, where rejection is for unrecoverable
failure and discard is for recoverable failure.

P.S. Special thanks to @jpinner for the initial input.
2013-03-11 08:57:17 +09:00
Norman Maurer
0a1bc86569 Javadocs cleanup / added 2013-03-10 21:07:19 +01:00
Norman Maurer
0ac5fd9f18 Let BufUtil.retain(...) return the given object 2013-03-10 19:50:26 +01:00
Trustin Lee
63116239ac Always use EmptyByteBuf when a user attempts to construct a buffer with 0 maxCapacity / Make EmptyByteBuf remember the allocator it came from / Optimize EmptyByteBuf a little bit 2013-03-08 11:03:11 +09:00
Trustin Lee
096e4c95ef Fix checkstyle 2013-03-08 10:39:52 +09:00
Trustin Lee
12f1d96914 Relaxed memory access constraint of ReferenceCounted.refCnt() for potentially better performance / More precise reference counting for MessageBuf 2013-03-08 10:32:20 +09:00
Trustin Lee
303f83043b Fix checkstyle 2013-03-06 18:23:08 +09:00
Trustin Lee
88df53ec1a Fix infinite recursion when transferring data between different type of buffers / Add ByteBuf.hasMemoryAddress/memoryAddress()
- Fixes: #1109 and #1110
2013-03-06 18:22:16 +09:00
Trustin Lee
3d6d9f394d Fix checkstyle 2013-03-06 17:10:26 +09:00
Trustin Lee
81ce0555e6 Add UnpooledUnsafeDirectByteBuf and use it when low-level access is available
- Remove PooledUnsafeDirectByteBuf.setMedium() which is redundant
- Fix constructor visibility
2013-03-06 16:01:46 +09:00
Trustin Lee
6c3d5ed907 Use _set* in AbstractByteBuf.write*() 2013-03-06 14:56:27 +09:00
Trustin Lee
1c1570ffc4 Make field access via ByteBuf.read/write*() faster by avoiding unnecessary boundary checks
- also disabled a time consuming test that is actually a regression test
2013-03-06 10:32:29 +09:00
Trustin Lee
5f2c2cdc9b Fix a bug in PoolArena and PoolSubpage where subpage pools are not updated correctly
- Make PoolSubpage a linked list node in the pool
- Now that a subpage is added to and removed from the pool correctly, allocating a subpage from the pool became vastly simpler.
2013-03-05 23:55:41 +09:00
Trustin Lee
4cb023f190 Add more variants of ByteBufAllocator.ioBuffer() / Update Javadoc 2013-03-05 17:59:31 +09:00
Trustin Lee
8d88acb4a7 Change ByteBufAllocator.buffer() to allocate a direct buffer only when the platform can handle a direct buffer reliably
- Rename directbyDefault to preferDirect
 - Add a system property 'io.netty.prederDirect' to allow a user from changing the preference on launch-time
 - Merge UnpooledByteBufAllocator.DEFAULT_BY_* to DEFAULT
2013-03-05 17:55:24 +09:00
Trustin Lee
307e6c47d8 Make hasUnsafe() return true only when all necessary low level operations are available for reliable direct buffer access 2013-03-05 17:25:54 +09:00
Trustin Lee
7e17f71b30 Make PlatformDependent work with the platforms without unaligned access support 2013-03-05 14:27:52 +09:00
Trustin Lee
d4d01ba52c Optimize SlicedByteBuf a little bit 2013-02-27 15:19:25 -08:00
Trustin Lee
49aa907bd0 [maven-release-plugin] prepare for next development iteration 2013-02-26 16:55:07 -08:00
Trustin Lee
5026c2f359 [maven-release-plugin] prepare release netty-4.0.0.Beta2 2013-02-26 16:54:53 -08:00
Trustin Lee
a9a8d5d8c2 Clean-up 2013-02-21 14:17:04 -08:00
Norman Maurer
74738fbd08 [#1061] Add workaround to not use PooledUnsafeDirectByteBuf when running on latest OpenJDK6 because of missing Unsafe method 2013-02-19 12:21:08 +01:00
Norman Maurer
4ed5b07e4e [#1060] Fix bug in CompositeByteBuf which let the buffer expand in a incorrect way and so result in corrupted data 2013-02-19 09:43:31 +01:00
Norman Maurer
1c6ed9b2ce Add javadocs 2013-02-17 20:12:48 +01:00
Trustin Lee
d68a04a879 [maven-release-plugin] prepare for next development iteration 2013-02-14 12:56:24 -08:00
Trustin Lee
59e638f8f5 [maven-release-plugin] prepare release netty-4.0.0.Beta1 2013-02-14 12:56:15 -08:00
Trustin Lee
1011227b88 Remove apiviz tags - we are focusing on user guide instead and putting diagrams there 2013-02-14 12:09:16 -08:00
Norman Maurer
7c002504a1 [#1051] Increment by the correct value 2013-02-14 14:28:47 +01:00
Norman Maurer
5370573400 Change ReferenceCounted.retain* to return itself and so allow method chaining 2013-02-14 07:39:44 +01:00
Trustin Lee
a1540a49d3 More safety in DefaultMessageBuf 2013-02-13 14:58:21 -08:00