Commit Graph

211 Commits

Author SHA1 Message Date
Scott Mitchell
540c26bb56 HTTP/2 Ensure default settings are correctly enforced and interfaces clarified
Motivation:
The responsibility for retaining the settings values and enforcing the settings constraints is spread out in different areas of the code and may be initialized with different values than the default specified in the RFC. This should not be allowed by default and interfaces which are responsible for maintaining/enforcing settings state should clearly indicate the restrictions that they should only be set by the codec upon receipt of a SETTINGS ACK frame.

Modifications:
- Encoder, Decoder, and the Headers Encoder/Decoder no longer expose public constructors that allow the default settings to be changed.
- Http2HeadersDecoder#maxHeaderSize() exists to provide some bound when headers/continuation frames are being aggregated. However this is roughly the same as SETTINGS_MAX_HEADER_LIST_SIZE (besides the 32 byte octet for each header field) and can be used instead of attempting to keep the two independent values in sync.
- Encoding headers now enforces SETTINGS_MAX_HEADER_LIST_SIZE at the octect level. Previously the header encoder compared the number of header key/value pairs against SETTINGS_MAX_HEADER_LIST_SIZE instead of the number of octets (plus 32 bytes overhead).
- DefaultHttp2ConnectionDecoder#onData calls shouldIgnoreHeadersOrDataFrame but may swallow exceptions from this method. This means a STREAM_RST frame may not be sent when it should for an unknown stream and thus violate the RFC. The exception is no longer swallowed.

Result:
Default settings state is enforced and interfaces related to settings state are clarified.
2016-10-07 13:00:45 -07:00
radai-rosenblatt
15ac6c4a1f Clean-up unused imports
Motivation:

the build doesnt seem to enforce this, so they piled up

Modifications:

removed unused import lines

Result:

less unused imports

Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
2016-09-30 09:08:50 +02:00
Masaru Nomura
20da5383ce Upgrade JMH to 1.14.1
Motivation:
It'd be usually good to use the latest library version.

Modification:
Bumped JMH to the latest version as of today.

Result:
Now we use JMH version 1.14.1 for our benchmark.
2016-09-29 21:29:26 +02:00
buchgr
67d3a78123 Reduce bytecode size of PlatformDependent0.equals.
Motivation:

PP0.equals has a bytecode size of 476. This is above the default inlining threshold of OpenJDK.

Modifications:

Slightly change the method to reduce the bytecode size by > 50% to 212 bytes.

Result:

The bytecode size is dramatically reduced, making the method a candidate for inlining.
The relevant code in our application (gRPC) that relies heavily on equals comparisons,
runs some ~10% faster. The Netty JMH benchmark shows no performance regression.

Current 4.1:

PlatformDependentBenchmark.unsafeBytesEqual      10  avgt   20     7.836 ±   0.113  ns/op
PlatformDependentBenchmark.unsafeBytesEqual      50  avgt   20    16.889 ±   4.284  ns/op
PlatformDependentBenchmark.unsafeBytesEqual     100  avgt   20    15.601 ±   0.296  ns/op
PlatformDependentBenchmark.unsafeBytesEqual    1000  avgt   20    95.885 ±   1.992  ns/op
PlatformDependentBenchmark.unsafeBytesEqual   10000  avgt   20   824.429 ±  12.792  ns/op
PlatformDependentBenchmark.unsafeBytesEqual  100000  avgt   20  8907.035 ± 177.844  ns/op

With this change:

PlatformDependentBenchmark.unsafeBytesEqual      10  avgt   20      5.616 ±   0.102  ns/op
PlatformDependentBenchmark.unsafeBytesEqual      50  avgt   20     17.896 ±   0.373  ns/op
PlatformDependentBenchmark.unsafeBytesEqual     100  avgt   20     14.952 ±   0.210  ns/op
PlatformDependentBenchmark.unsafeBytesEqual    1000  avgt   20     94.799 ±   1.604  ns/op
PlatformDependentBenchmark.unsafeBytesEqual   10000  avgt   20    834.996 ±  17.484  ns/op
PlatformDependentBenchmark.unsafeBytesEqual  100000  avgt   20   8757.421 ± 187.555  ns/op
2016-09-09 07:57:41 +02:00
Norman Maurer
54b1a100f4 [maven-release-plugin] prepare for next development iteration 2016-08-26 10:06:32 +02:00
Norman Maurer
1208b90f57 [maven-release-plugin] prepare release netty-4.1.5.Final 2016-08-26 04:59:35 +02:00
Scott Mitchell
208893aac9 HTTP/2 Hpack Encoder Cleanup
Motivation:
The HTTP/2 HPACK Encoder class has some code which is only used for test purposes. This code can be removed to reduce complexity and member variable count.

Modifications:
- Remove test code and update unit tests
- Other minor cleanup

Result:
Test code is removed from operational code.
2016-08-25 09:08:46 -07:00
Scott Mitchell
21e8d84b79 HTTP/2 Simplify Headers Decode Bounds Checking
Motivation:
The HPACK decoder keeps state so that the decode method can be called multiple times with successive header fragments. This decoder also requires that a method is called to signify the decoding is complete. At this point status is returned to indicate if the max header size has been violated. Netty always accumulates the header fragments into a single buffer before attempting to HPACK decode process and so keeping state and delaying notification that bounds have been exceeded is not necessary.

Modifications:
- HPACK Decoder#decode(..) now must be called with a complete header block
- HPACK will terminate immediately if the maximum header length, or maximum number of headers is exceeded
- Reduce member variables in the HPACK Decoder class because they can now live in the decode(..) method

Result:
HPACK bounds checking is done earlier and less class state is needed.
2016-08-12 17:12:53 -07:00
Scott Mitchell
82b617dfe9 retainSlice() unwrap ByteBuf
Motivation:
retainSlice() currently does not unwrap the ByteBuf when creating the ByteBuf wrapper. This effectivley forms a linked list of ByteBuf when it is only necessary to maintain a reference to the unwrapped ByteBuf.

Modifications:
- retainSlice() and retainDuplicate() variants should only maintain a reference to the unwrapped ByteBuf
- create new unit tests which generally verify the retainSlice() behavior
- Remove unecessary generic arguments from AbstractPooledDerivedByteBuf
- Remove unecessary int length member variable from the unpooled sliced ByteBuf implementation
- Rename the unpooled sliced/derived ByteBuf to include Unpooled in their name to be more consistent with the Pooled variants

Result:
Fixes https://github.com/netty/netty/issues/5582
2016-07-29 11:16:44 -07:00
Norman Maurer
cb7cf4491c [maven-release-plugin] prepare for next development iteration 2016-07-27 13:29:56 +02:00
Norman Maurer
9466b32d05 [maven-release-plugin] prepare release netty-4.1.4.Final 2016-07-27 13:16:59 +02:00
Norman Maurer
047f6aed28 [maven-release-plugin] prepare for next development iteration 2016-07-15 09:09:13 +02:00
Norman Maurer
b2adea87a0 [maven-release-plugin] prepare release netty-4.1.3.Final 2016-07-15 09:08:53 +02:00
Norman Maurer
4676a2271c [maven-release-plugin] prepare for next development iteration 2016-07-01 10:33:32 +02:00
Norman Maurer
ad270c02b9 [maven-release-plugin] prepare release netty-4.1.2.Final 2016-07-01 09:07:40 +02:00
Scott Mitchell
6af56ffe76 HPACK Encoder headerFields improvements
Motivation:
HPACK Encoder has a data structure which is similar to a previous version of DefaultHeaders. Some of the same improvements can be made.

Motivation:
- Enforce the restriction that the Encoder's headerFields length must be a power of two so we can use masking instead of modulo
- Use AsciiString.hashCode which already has optimizations instead of having yet another hash code algorithm in Encoder

Result:
Fixes https://github.com/netty/netty/issues/5357
2016-06-30 09:00:12 -07:00
Scott Mitchell
a7f7d9c8e0 Remove unsafe char[] access in PlatformDependent
Motivation:
PlatformDependent attempts to use reflection to get the underlying char[] (or byte[]) from String objects. This is fragile as if the String implementation does not utilize the full array, and instead uses a subset of the array, this optimization is invalid. OpenJDK6 and some earlier versions of OpenJDK7 String have the capability to use a subsection of the underlying char[].

Modifications:
- PlatformDependent should not attempt to use the underlying array from String (or other data types) via reflection

Result:
PlatformDependent hash code generation for CharSequence does not depend upon specific JDK implementation details.
2016-06-30 08:58:28 -07:00
Scott Mitchell
70651cc58d HpackUtil.equals performance improvement
Motivation:
PR #5355 modified interfaces to reduce GC related to the HPACK code. However this came with an anticipated performance regression related to HpackUtil.equals due to AsciiString's increase cost of charAt(..). We should mitigate this performance regression.

Modifications:
- Introduce an equals method in PlatformDependent which doesn't leak timing information and use this in HpcakUtil.equals

Result:
Fixes https://github.com/netty/netty/issues/5436
2016-06-27 14:37:39 -07:00
Guido Medina
f0a5ee068f Update dependencies and plugins to latest possible versions.
Motivation:
It is good to have used dependencies and plugins up-to-date to fix any undiscovered bug fixed by the authors.

Modification:
Scanned dependencies and plugins and carefully updated one by one.

Result:
Dependencies and plugins are up-to-date.
2016-06-27 13:35:35 +02:00
Norman Maurer
b4d4c0034d Optimize HPACK usage to align more with Netty types and remove heavy object creations. Related to [#3597]
Motivations:

The HPACK code was not really optimized and written with Netty types in mind. Because of this a lot of garbage was created due heavy object creation.

This was first reported in [#3597] and https://github.com/grpc/grpc-java/issues/1872 .

Modifications:

- Directly use ByteBuf as input and output
- Make use of ByteProcessor where possible
- Use AsciiString as this is the only thing we need for our http2 usage

Result:

Less garbage and better usage of Netty apis.
2016-06-22 14:26:05 +02:00
Norman Maurer
4dec7f11b7 [maven-release-plugin] prepare for next development iteration 2016-06-07 18:52:34 +02:00
Norman Maurer
cf670fab75 [maven-release-plugin] prepare release netty-4.1.1.Final 2016-06-07 18:52:22 +02:00
Norman Maurer
6ca49d1336 [maven-release-plugin] prepare for next development iteration 2016-05-25 19:16:44 +02:00
Norman Maurer
446b38db52 [maven-release-plugin] prepare release netty-4.1.0.Final 2016-05-25 19:14:15 +02:00
Norman Maurer
e59d0e9efb Introduce CodecOutputList to reduce overhead of encoder/decoder
Motivation:

99dfc9ea79 introduced some code that will more frequently try to forward messages out of the list of decoded messages to reduce latency and memory footprint. Unfortunally this has the side-effect that RecycleableArrayList.clear() will be called more often and so introduce some overhead as ArrayList will null out the array on each call.

Modifications:

- Introduce a CodecOutputList which allows to not null out the array until we recycle it and also allows to access internal array with extra range checks.
- Add benchmark that add elements to different List implementations and clear them

Result:

Less overhead when decode / encode messages.

Benchmark                                     (elements)   Mode  Cnt         Score        Error  Units
CodecOutputListBenchmark.arrayList                     1  thrpt   20  24853764.609 ± 161582.376  ops/s
CodecOutputListBenchmark.arrayList                     4  thrpt   20  17310636.508 ± 930517.403  ops/s
CodecOutputListBenchmark.codecOutList                  1  thrpt   20  26670751.661 ± 587812.655  ops/s
CodecOutputListBenchmark.codecOutList                  4  thrpt   20  25166421.089 ± 166945.599  ops/s
CodecOutputListBenchmark.recyclableArrayList           1  thrpt   20  24565992.626 ± 210017.290  ops/s
CodecOutputListBenchmark.recyclableArrayList           4  thrpt   20  18477881.775 ± 157003.777  ops/s

Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 246.748 sec - in io.netty.handler.codec.CodecOutputListBenchmark
2016-05-20 09:12:07 +02:00
Norman Maurer
68cd670eb9 Remove ChannelHandlerInvoker
Motivation:

We tried to provide the ability for the user to change the semantics of the threading-model by delegate the invoking of the ChannelHandler to the ChannelHandlerInvoker. Unfortunually this not really worked out quite well and resulted in just more complexity and splitting of code that belongs together. We should remove the ChannelHandlerInvoker again and just do the same as in 4.0

Modifications:

Remove ChannelHandlerInvoker again and replace its usage in Http2MultiplexCodec

Result:

Easier code and less bad abstractions.
2016-05-17 11:14:00 +02:00
Scott Mitchell
c5faa142fb KObjectHashMap probeNext improvement
Motivation:
KObjectHashMap.probeNext(..) usually involves 2 conditional statements and 2 aritmatic operations. This can be improved to have 0 conditional statements.

Modifications:
- Use bit masking to avoid conditional statements

Result:
Improved performance for KObjecthashMap.probeNext(..)
2016-05-13 10:04:26 -07:00
Scott Mitchell
d580245afc DefaultHttp2Connection.close Reentrant Modification
Motivation:
The DefaultHttp2Conneciton.close method accounts for active streams being iterated and attempts to avoid reentrant modifications of the underlying stream map by using iterators to remove from the stream map. However there are a few issues:

- While iterating over the stream map we don't prevent iterations over the active stream collection
- Removing a single stream may actually remove > 1 streams due to closed non-leaf streams being preserved in the priority tree which may result in NPE

Preserving closed non-leaf streams in the priority tree is no longer necessary with our current allocation algorithms, and so this feature (and related complexity) can be removed.

Modifications:
- DefaultHttp2Connection.close should prevent others from iterating over the active streams and reentrant modification scenarios which may result from this
- DefaultHttp2Connection should not keep closed stream in the priority tree
  - Remove all associated code in DefaultHttp2RemoteFlowController which accounts for this case including the ReducedState object
  - This includes fixing writability changes which depended on ReducedState
- Update unit tests

Result:
Fixes https://github.com/netty/netty/issues/5198
2016-05-09 14:16:30 -07:00
Norman Maurer
9229ed98e2 [#5088] Add annotation which marks packages/interfaces/classes as unstable
Motivation:

Some codecs should be considered unstable as these are relative new. For this purpose we should introduce an annotation which these codecs should us to be marked as unstable in terms of API.

Modifications:

- Add UnstableApi annotation and use it on codecs that are not stable
- Move http2.hpack to http2.internal.hpack as it is internal.

Result:

Better document unstable APIs.
2016-05-09 15:16:35 +02:00
Norman Maurer
03638869b9 Update dependencies
Motivation:

Before release 4.1.0.Final we should update all our dependencies.

Modifications:

Update dependencies.

Result:

Up-to-date dependencies used.
2016-04-14 11:05:53 +02:00
Norman Maurer
572bdfb494 [maven-release-plugin] prepare for next development iteration 2016-04-10 08:37:18 +02:00
Norman Maurer
c6121a6f49 [maven-release-plugin] prepare release netty-4.1.0.CR7 2016-04-10 08:36:56 +02:00
Norman Maurer
6e919f70f8 [maven-release-plugin] rollback the release of netty-4.1.0.CR7 2016-04-09 22:13:44 +02:00
Norman Maurer
4cdd51509a [maven-release-plugin] prepare release netty-4.1.0.CR7 2016-04-09 22:05:34 +02:00
Trustin Lee
3b941c2a7c [maven-release-plugin] prepare for next development iteration 2016-04-02 01:25:05 -04:00
Trustin Lee
7368ccc539 [maven-release-plugin] prepare release netty-4.1.0.CR6 2016-04-02 01:24:55 -04:00
Norman Maurer
cee38ed2b6 [maven-release-plugin] prepare for next development iteration 2016-03-29 16:45:13 +02:00
Norman Maurer
9cd9e7daeb [maven-release-plugin] prepare release netty-4.1.0.CR5 2016-03-29 16:44:33 +02:00
Xiaoyan Lin
3ad55eb839 Speed up the slow path of FastThreadLocal
Motivation:

The current slow path of FastThreadLocal is much slower than JDK ThreadLocal. See #4418

Modifications:

- Add FastThreadLocalSlowPathBenchmark for the flow path of FastThreadLocal
- Add final to speed up the slow path of FastThreadLocal

Result:

The slow path of FastThreadLocal is improved.
2016-03-23 11:36:16 +01:00
Norman Maurer
28d03adbfe [maven-release-plugin] prepare for next development iteration 2016-03-21 11:51:50 +01:00
Norman Maurer
4653dc1d05 [maven-release-plugin] prepare release netty-4.1.0.CR4 2016-03-21 11:51:12 +01:00
Xiaoyan Lin
4a5e484c5a Add xml-maven-plugin to check indentation and fix violations
Motivation:

See https://github.com/netty/netty-build/issues/5

Modifications:

Add xml-maven-plugin to check indentation and fix violations

Result:
pom.xml will be checked in the PR build
2016-02-29 09:46:32 +01:00
Norman Maurer
ca443e42e0 [maven-release-plugin] prepare for next development iteration 2016-02-19 23:00:11 +01:00
Norman Maurer
f39eb9a6b2 [maven-release-plugin] prepare release netty-4.1.0.CR3 2016-02-19 22:59:52 +01:00
Norman Maurer
75a2ddd61c [maven-release-plugin] prepare for next development iteration 2016-02-04 16:51:44 +01:00
Norman Maurer
7eb3a60dba [maven-release-plugin] prepare release netty-4.1.0.CR2 2016-02-04 16:37:06 +01:00
Scott Mitchell
f990f9983d HTTP/2 Don't Flow Control Iniital Headers
Motivation:
Currently the initial headers for every stream is queued in the flow controller. Since the initial header frame may create streams the peer must receive these frames in the order in which they were created, or else this will be a protocol error and the connection will be closed. Tolerating the initial headers being queued would increase the complexity of the WeightedFairQueueByteDistributor and there is benefit of doing so is not clear.

Modifications:
- The initial headers will no longer be queued in the flow controllers

Result:
Fixes https://github.com/netty/netty/issues/4758
2016-02-01 13:37:43 -08:00
Norman Maurer
1c417e5f82 [maven-release-plugin] prepare for next development iteration 2016-01-21 15:35:55 +01:00
Norman Maurer
c681a40a78 [maven-release-plugin] prepare release netty-4.1.0.CR1 2016-01-21 15:28:21 +01:00
Eric Anderson
6dbb610f5b Add ChannelHandlerContext.invoker()
Motivation:

Being able to access the invoker() is useful when adding additional
handlers that should be running in the same thread. Since an application
may be using a threading model unsupported by the default invoker, they
can specify their own. Because of that, in a handler that auto-adds
other handlers:

// This is a good pattern
ctx.pipeline().addBefore(ctx.invoker(), ctx.name(), null, newHandler);
// This will generally work, but prevents using custom invoker.
ctx.pipeline().addBefore(ctx.executor(), ctx.name(), null, newHandler);

That's why I believe in commit 110745b0, for the now-defunct 5.0 branch,
when ChannelHandlerAppender was added the invoker() method was also
necessary.

There is a side-benefit to exposing the invoker: in certain advanced
use-cases using the invoker for a particular handler is useful. Using
the invoker you are able to invoke a _particular_ handler, from possibly
a different thread yet still using standard exception processing.

ChannelHandlerContext does part of that, but is unwieldy when trying to
invoke a particular handler because it invokes the prev or next handler,
not the one the context is for. A workaround is to use the next or prev
context (respectively), but this breaks when the pipeline changes.

This came up during writing the Http2MultiplexCodec which uses a
separate child channel for each http/2 stream and wants to send messages
from the child channel directly to the Http2MultiplexCodec handler that
created it.

Modifications:

Add the invoker() method to ChannelHandlerContext. It was already being
implemented by AbstractChannelHandlerContext. The two other
implementations of ChannelHandlerContext needed minor tweaks.

Result:

Access to the invoker used for a particular handler, for either reusing
for other handlers or for advanced use-cases. Fixes #4738
2016-01-22 14:04:35 +01:00