Motivation:
Currently FlushConsolidationHandler only consolidates if a read loop is
active for a Channel, otherwise each writeAndFlush(...) call will still
be flushed individually. When these calls are close enough, it can be
beneficial to consolidate them even outside of a read loop.
Modifications:
When we allow a flush to "go through", don't perform it immediately, but
submit it on the channel's executor. Under high pressure, this gives
other writes a chance to enqueue before the task gets executed, and so
we flush multiple writes at once.
Result:
Lower CPU usage and less context switching.
Motivation:
We need to ensure we release all direct memory once the DirectPoolArena is collected. Otherwise we may never reclaim the memory and so leak memory.
Modifications:
Ensure we destroy all PoolChunk memory when DirectPoolArena is collected.
Result:
Free up unreleased memory when DirectPoolArena is collected.
Motivation:
codec-http2 is really loud!
Modification:
Allow users to select how to log in the Http2Codec.
Result:
We can run Http2Codec and log however we like.
Motivation:
NetUtil.bytesToIpAddress does not correctly translate IPv4 address to String. Also IPv6 addresses may not follow minimization conventions when converting to a String (see rfc 5952).
Modifications:
- NetUtil.bytesToIpAddress should correctly handle negative byte values for IPv4
- NetUtil.bytesToIpAddress should leverage existing to string conversion code in NetUtil
Result:
Fixes https://github.com/netty/netty/issues/5821
Motivation:
HttpObjectDecoder maintains a resetRequested flag which is used to determine if internal state should be reset when a decode occurs. However after a reset is done the resetRequested flag is not set to false. This leads to all data after this point being discarded.
Modifications:
- Set resetRequested to false when a reset is done
Result:
HttpObjectDecoder can still function after a reset.
Motivation:
HTTP/2 Decoder#decodeULE128 current will tolerate more bytes than necessary when attempted to detect overflow. The usage of this method also currently requires an additional overflow conditional.
Modifications:
- Integrate the first byte into Decoder#decodeULE128 which allows us to detect overflow reliably and avoid overflow checks outside of this method.
Result:
Less conditionals and earlier overflow detection in Decoder#decodeULE128
Motivation:
For the leak profile we attempted to increase the number of leak hints that were retained to make debugging easier, but there was a typo.
Modifications:
- maxRecord -> maxRecords
Result:
Fix typo in pom.xml so leak profile provides more context for leaks.
Motivation
Give the user the ability to back out from SNI negoations.
Modifications
Put a try-catch around the select() call and re-fire any caught Exceptions.
Result
Fixes#5787
Motivation:
Avoid multiple search in fragments map
Modifications:
Replace usage of Map.containsKey by Map.remove
Result:
During packet process, fragment is only search once in the map instead of 3 times in the previous worst case
Motivation:
We need to duplicate the buffer before passing it to writeBytes(...) as it will increase the readerIndex().
Modifications:
Call duplicate().
Result:
No more IndexOutOfBoundsException when runing the multiplex example.
Motivation:
We called ctx.flush() which is not correct as it will not call flowController().writePendingBytes().
Modifications:
Call flush(ChannelHandlerContext) and so also call flowController().writePendingBytes().
Result:
Correct http2 example
Motivation:
Http2ServerInitializer uses a SimpleChannelHandler in an attempt to ease putting an HttpObjectAggregator in the pipeline when no upgrade is attempted. However the message is double released because it is fired up the pipeline (which will be released) and also released by SimpleChannelHandler in a finally block.
Modifications:
- Retain the message if we fire it up the pipeline
Result:
HTTP/2 examples don't encounter a reference count error if no upgrade was attempted.
Motivation:
At the moment only DefaultFileRegion is supported when using the native epoll transport.
Modification:
- Add support for any FileRegion implementation
- Add test case
Result:
Also custom FileRegion implementation are supported when using the epoll transport.
Motivation:
As discussed in #5738, developers need to concern themselves with setting
connection: keep-alive on the response as well as whether to close a
connection or not after writing a response. This leads to special keep-alive
handling logic in many different places. The purpose of the HttpServerKeepAliveHandler
is to allow developers to add this handler to their pipeline and therefore
free themselves of having to worry about the details of how Keep-Alive works.
Modifications:
Added HttpServerKeepAliveHandler to the io.netty.handler.codec.http package.
Result:
Developers can start using HttpServerKeepAliveHandler in their pipeline instead
of worrying about when to close a connection for keep-alive.
Motivation:
Http2ServerDowngrader doesn't mark chunked requests as chunked, even
though the natural conversion from http/2 requests to http/1.1 requests
is to chunked ones.
Modifications:
Mark requests that aren't already complete as chunked.
Result:
Requests will be chunked, and can later be aggregated if necessary.
Motivation:
IdleStateHandler has a number of volatile member variables which are only accessed from the EventLoop thread. These do not have to be volatile. The accessibility of these member variables are not consistent between private and package private. The state variable can also use a byte instead of an int.
Modifications:
- Remove volatile from member variables
- Change access to private for member variables
- Change state from int to byte
Result:
IdleStateHandler member variables cleaned up.
Motivation:
Void promises need special treatment, as they don't behave like normal promises. One
cannot add a listener to a void promise for example.
Modifications:
Inspected the code for addListener() calls, and added extra logic for void promises
where necessary. Essentially, when writing a frame with a void promise, any errors
are reported via the channel pipeline's exceptionCaught event.
Result:
The HTTP/2 codec has better support for void promises.
Motivation:
MessageAggregator has a potential to leak if a new message is received before the existing message has completed, and if a HttpContent is received but maxContentLength has been exceeded, or the content length is too long.
Modifications:
- Make the HttpObjectAggregator more robust to leaks
- Reduce dependance on handlingOversizedMessage but instead rely on the more general check of a null currentMessage
Result:
More robust MessageAggregator with less chance of leaks
Motivation:
At the moment we log very confusing messages when trying to load a native library which kind of suggest that the whole loading process failed even if just one mechanism failed and the library could be loaded at the end.
Modifications:
Make the mesage less confusing and also log a successful load of the native library.
Result:
Less confusing logs.
Motivation:
IdleStateHandler and ReadTimeoutHandler could mistakely not fire an event even if no channelRead(...) call happened.
Modifications:
Only set lastReadTime if a read happened before.
Result:
More correct IdleStateHandler / ReadTimeoutHandler.
Motivation:
Since netty shaded JCTools the OSGi manifest no longer is correct. It claims to
have an optional import "org.jctools.queues;resolution:=optional,org.jctools.qu
eues.atomic;resolution:=optional,org.jctools.util;resolution:=optional"
However since it is shaded, this is no longer true.
This was noticed when making JCTools a real bundle and netty resolved it as
optional import.
Modifications:
Modify the generated manifest by no longer analyzing org.jctools for imports.
A manual setting of sun.misc as optional was required.
Result:
Netty OSGi bundle will no longer interfere with a JCTools bundle.
Motivation:
We need to ensure we only call debugData.release() if we called debugData.retain(), otherwise we my see an IllegalReferenceCountException.
Modifications:
Only call release() if we called retain().
Result:
No more IllegalReferenceCountException possible.
Motivation:
We need to call debugData.retain() before we forward the frame to the pipeline as ByteToMessageDecoder will call release() on the buffer.
Modifications:
Correctly retain debugData and fix the unit test to test for it.
Result:
No more IllegalReferenceCountException when using the Http2FrameCodec.
Motivation:
As described in #5734
Before this change, if the server had to do some sort of setup after a
handshake was completed based on handshake's information, the only way
available was to wait (in a separate thread) for the handshaker to be
added as an attribute to the channel. Too much hassle.
Modifications:
Handshake completed event need to be stateful now, so I've added a tiny
class holding just the HTTP upgrade request and the selected subprotocol
which is fired as an event after the handshake has finished.
I've also deprecated the old enum used as stateless event and I left the
code that fires it for backward compatibility. It should be removed in
the next mayor release.
Result:
It should be much simpler now to do initialization stuff based on
subprotocol or request headers on handshake completion. No asynchronous
waiting needed anymore.
Motivation:
he HTTP/2 spec demands that the max value for SETTINGS_HEADER_TABLE_SIZE should be an unsigned 32-bit integer.
Modifications:
Change the limit to unsigned 32-bit integer and add tests.
Result:
Complient to rfc.
Motivation:
As we use compression in the websocketx example we need to allow extensions as ohterwise the example not works.
Modifications:
Allow extensions.
Result:
websocketx example does work.
Motivation:
To make it easier to debug why notification of a promise failed we should log extra info and make it consistent.
Modifications:
- Create a new PromiseNotificationUtil that has static methods that can be used to try notify a promise and log.
- Reuse this in AbstractChannelHandlerContext, ChannelOutboundBuffer and PromiseNotifier
Result:
Easier to debug why a promise could not be notified.
Motivation:
There is an incoherence in terms of API when one wants to use
startTls: without startTls one can use the SslContextBuilder's
method newHandler, but with startTls, the developper is forced
to call directly the SslHandler constructor.
Modifications:
Introduce startTls as a SslContextBuilder parameter as well as a
member in SslContext (and thus Jdk and OpenSsl implementations!).
Always use this information to call the SslHandler constructor.
Use false by default, in particular in deprecated constructors of
the SSL implementations.
The client Context use false by default
Results:
Fixes#5170 and more generally homogenise the API so that
everything can be done via SslContextBuilder.
Motivation
I'm looking to harden our SSL impl. a little bit and add some guards agaist certain types of abuse. One can think of invalid hostname strings in the SNI extenstion or invalid SNI handshakes altogether. This will require measuring, velocity tracking and other things.
Modifications
Adding a protected `lookup(ctx, hostname)` method that is called from SniHandler's `select(...)` method which users can override and implement custom behaviour. The default implementation will simply call the AsyncMapper.
Result
It's possible to get a hold onto the ChannelHandlerContext. Users can override that method and do something with it right there or they can delegate it to something else. SniHandler is happy as long as a `Future<SslContext>` is being returned.
Motivation:
The CorsHandler currently closes the channel when it responds to a preflight (OPTIONS)
request or in the event of a short circuit due to failed validation.
Especially in an environment where there's a proxy in front of the service this causes
unnecessary connection churn.
Modifications:
CorsHandler now uses HttpUtil to determine if the connection should be closed
after responding and to set the Connection header on the response.
Result:
Channel will stay open when the CorsHandler responds unless the client specifies otherwise
or the protocol version is HTTP/1.0
Motivation:
RFC7871 defines an extension which allows to request responses for a given subset.
Modifications:
- Add DnsOptPseudoRrRecord which can act as base class for extensions based on EDNS(0) as defined in RFC6891
- Add DnsOptEcsRecord to support the Client Subnet in DNS Queries extension
- Add tests
Result:
Client Subnet in DNS Queries extension is now supported.
Motivation:
af632278d2 introduced a test which only worked on some jvm versions and specific os'es.
Modifications:
Fix test to work on different java versions and os'es
Result:
No flacky test.
Motivation:
We need to ensure we not set duplicated certificates when using OpenSslEngine.
Modifications:
- Skip first cert in chain when set the chain itself and so not send duplicated certificates
- Add interopt unit tests to ensure no duplicates are send.
Result:
No more duplicates.
Motivation:
AbstractTrafficShapingHandler has a package-private method called "userDefinedWritabilityIndex()" which a user may need to override if two sub-classes wants to be used in the ChannelPipeline.
Modifications:
Mark method protected.
Result:
Easier to extend AbstractTrafficShapingHandler.
Motivation:
For use cases that demand frequent updates of the write watermarks, an
API that requires immutable WriteWaterMark objects is not ideal, as it
implies a lot of object allocation.
For example, the HTTP/2 child channel API uses write watermarks for outbound
flow control and updates the write watermarks on every DATA frame write.
Modifications:
Remote @Deprecated tag from primitive getters and setters, however the corresponding
channel options remain deprecated.
Result:
Primitive getters and setters for write watermarks are no longer marked @Deprecated.
Motivation:
We can share the code in retain() and retain(...) and also in release() and release(...).
Modifications:
Share code.
Result:
Less duplicated code.
Motivation:
The JDK implementation of SocketChannel has an internal state that is tracked for its operations. Because of this we need to ensure we call finishConnect() before try to call read(...) / write(...) as otherwise it may produce a NotYetConnectedException.
Modifications:
First process OP_CONNECT flag.
Result:
No more possibility of NotYetConnectedException because OP_CONNECT is handled not early enough when processing interestedOps for a Channel.
Motivation:
SslHandler can be cleaned up a bit in terms of naming and duplicated code.
Modifications:
- Fix naming of arguments
- Not schedule timeout event if not really needed
- share some code and simplify
Result:
Cleaner code.
Motivation:
We need to not change the original writerIndex when decode a DnsPtrRecord as otherwise we will not be able to decode other records that follow it.
Modifications:
Slice the data out and so not increase the writerIndex.
Result:
No more problems when decoding.
Motivation:
We introduced a regression in 1abdbe6f67 which let the iteration start from the wrong index.
Modifications:
Fix start index and add tests.
Result:
Fix regression.
Motivation:
The DefaultEventLoopGroup class extends MultithreadEventExecutorGroup but doesn't expose the ctor variants that accept a custom Executor like NioEventLoopGroup and EpollEventLoopGroup do.
Modifications:
Add missing constructor.
Result:
Be able to use custom Executor with DefaultEventLoopGroup.
Motivition:
NIO throws ClosedChannelException when a user tries to call shutdown*() on a closed Channel. We should do the same for the EPOLL transport
Modification:
Throw ClosedChannelException when a user tries to call shutdown*() on a closed channel.
Result:
Consistent behavior.
Motivation:
When a SecurityManager is in place it may dissallow accessing the property which will lead to not be able to load the application.
Modifications:
Use AccessController.doPrivileged(...)
Result:
No more problems with SecurityManager.
Motivation:
When attempting to set the selectedKeys fields on the selector
implementation, JDK 9 can throw an inaccessible object exception.
Modications:
Catch and log this exception as an possible course of action if the
sun.nio.ch package is not exported from java.base.
Result:
The selector replacement will fail gracefully as an expected course of
action if the sun.nio.ch package is not exported from java.base.
Motivation:
Windows refuses to load a .DLL file when it's opened by other process.
Recent modification in NativeLibraryLoader causes NativeLibraryLoader to
attempt to load a .DLL before closing its OutputStream. As a result,
loading a .DLL file in Windows always fails.
Modifications:
Close the OutputStream explicitly before loading a shared library.
Result:
Native library loading in Windows works again.
