Motivation:
Currently we passing custom websocket handshaker response headers to a `WebSocketServerHandshaker` but they can contain a reserved headers (e.g. Connection, Upgrade, Sec-Websocket-Accept) what lead to duplication because we use response.headers().add(..) instead of response.headers().set(..).
Modification:
In each `WebSocketServerHandshaker00`, ... `WebSocketServerHandshaker13` implementation replace the method add(..) to set(..) for reserved response headers.
Result:
Less error-prone
Motivation:
`FileChannel.read()` may throw an IOException. We must deal with this in case of the occurrence of `I/O` error.
Modification:
Place the `FileChannel.read()` method call in the `try-finally` block.
Result:
Advoid fd leak.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivations
-----------
HttpPostStandardRequestDecoder was changed in 4.1.50 to provide its own
ByteBuf UrlDecoder. Prior to this change, it was using the decodeComponent
method from QueryStringDecoder which decoded + characters to
whitespaces. This behavior needs to be preserved to maintain backward
compatibility.
Modifications
-------------
Changed HttpPostStandardRequestDecoder to detect + bytes and decode them
toe whitespaces. Added a test.
Results
-------
Addresses issues#10284
Motivation:
We cant reuse the ChannelPromise as it will cause an error when trying to ful-fill it multiple times.
Modifications:
- Use a new promise and chain it with the old one
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/10240
Motivation:
We should not use Unpooled to allocate buffers if possible to ensure we can make use of pooling etc.
Modifications:
- Only allocate a buffer if really needed
- Use the ByteBufAllocator of the offered ByteBuf
- Ensure we not use buffer.copy() but explicitly allocate a buffer and then copy into it to not hit the limit of maxCapacity()
Result:
Improve allocations
Motivation:
We need to release all ByteBufs that we allocate to prevent leaks. We missed to release the ByteBufs that are used to aggregate in two cases
Modifications:
Add release() calls
Result:
No more memory leak in HttpPostMultipartRequestDecoder
Motivations
-----------
There is no need to copy the "offered" ByteBuf in HttpPostRequestDecoder
when the first HttpContent ByteBuf is also the last (LastHttpContent) as
the full content can immediately be decoded. No extra bookeeping needed.
Modifications
-------------
HttpPostMultipartRequestDecoder
- Retain the first ByteBuf when it is both the first HttpContent offered
to the decoder and is also LastHttpContent.
- Retain slices of the final buffers values
Results
-------
ByteBufs of FullHttpMessage decoded by HttpPostRequestDecoder are no longer
unnecessarily copied. Attributes are extracted as retained slices when
the content is multi-part. Non-multi-part content continues to return
Unpooled buffers.
Partially addresses issue #10200
Motivation:
`AbstractHttpData.checkSize` may throw an IOException if we set the max size limit via `AbstractHttpData.setMaxSize`. However, if this exception happens, the `AbstractDiskHttpData.file` and the `AbstractHttpData.size` are still be modified. In other words, it may break the failure atomicity here.
Modification:
Just move up the size check.
Result:
Keep the failure atomicity even if `AbstractHttpData.checkSize` fails.
Motivation:
An unexpected IOException may be thrown from `FileChannel.force`. If it happens, the `FileChannel.close` may not be invoked.
Modification:
Place the `FileChannel.close` in a finally block.
Result:
Avoid fd leak.
Motivation:
`RandomAccessFile.setLength` may throw an IOException. We must deal with this in case of the occurrence of `I/O` error.
Modification:
Place the `RandomAccessFile.setLength` method call in the `try-finally` block.
Result:
Avoid fd leak.
Motivation:
`FileChannel.force` may throw an IOException. A fd leak may happen here.
Modification:
Close the fileChannel in a finally block.
Result:
Avoid fd leak.
Motivation:
An `IOException` may be thrown from `FileChannel.write` or `FileChannel.force`, and cause the fd leak.
Modification:
Close the file in a finally block.
Result:
Avoid fd leak.
Motivation:
An exception may occur between ByteBuf's allocation and release. So I think it's a good idea to place the release operation in a finally block.
Modification:
Release the temporary ByteBuf in finally blocks.
Result:
Avoid ByteBuf leak.
Motivation:
An IOException may be thrown from FileChannel.read, and cause the fd leak.
Modification:
Close the file when IOException occurs.
Result:
Avoid fd leak.
Motivation:
currently (http) disk based attributes or uploads are globally configured in a single directory and can also only globally be deleted on exit or not. it does not fit well multiple cases, in particular the case you have multiple servers in the same JVM.
Modification:
make it configurable per attribute/fileupload.
Result:
This PR duplicates Disk* constructor to add basedir and deleteonexit parameters and wires it in default http daa factory.
Motivation:
An IOException may be thrown from InputStream.read or checkSize method, and cause the ByteBuf leak.
Modification:
Release the ByteBuf when IOException occurs.
Result:
Avoid ByteBuf leak.
Motivation:
At the moment HttpObjectDecoder does not limit the number of controls chars. These should be counted with the initial line and so a limit should be exposed
Modifications:
- Change LineParser to also be used when skipping control chars and so enforce a limit
- Add various tests to ensure that limit is enforced
Result:
Fixes https://github.com/netty/netty/issues/10111
Motivation:
In our WebSocketClientHandshaker* implementations we "hardcode" the version number to use. This is error-prone, we should better use the WebSocketVersion so we dont need to maintain the value multiple times. Beside this we can also use an AsciiString to improve performance
Modifications:
- Use WebSocketVersion.toAsciiString
Result:
Less stuff to maintain and small performance win
Motivation:
The user may need to provide a specific HOST header. We should not override it when specified during handshake.
Modifications:
Check if a custom HOST header is already provided by the user and if so dont override it
Result:
Fixes https://github.com/netty/netty/issues/10101
Motivation:
Netty currently does not support the SameSite attribute for response cookies (see issue #8161 for discussion).
Modifications:
The attribute has been added to the DefaultCookie class as a quick fix since adding new methods to the Cookie interface would be backwards-incompatible.
ServerCookieEncoder and ClientCookieDecoder have been updated accordingly to process this value. No validation for allowed values (Lax, None, Strict) has been implemented.
Result:
Response cookies with the SameSite attribute set can be read or written by Netty.
Co-authored-by: David Latorre <a-dlatorre@hotels.com>
Motivation:
WebSocketClientHandshaker#upgradeUrl doesn't comperly compute relative url when path is empty and produces url such as `?access_token=foo` instead of `/?access_token=foo`.
Modifications:
* fix WebSocketClientHandshaker#upgradeUrl
* add tests for urls without path, with and without query
Result:
WebSocketClientHandshaker properly connects to url without path.
Motivation:
I am receiving a mutlipart/form_data upload from postman. The filename contains Chinese, and so some invalid chars. We should ensure all of these are removed before trying to decode.
Modification:
Ensure all invalid characters are removed
Result:
Fixes#10087
Co-authored-by: liming.zhang <liming.zhang@luckincoffee.com>
Motivation:
When the HttpContentCompressor is put on an alternate EventExecutor, the order of events should be
preserved so that the compressed content is correctly created.
Modifications:
- checking that the executor in the ChannelHandlerContext is the same executor as the current executor when evaluating if the handler should be skipped.
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/10067
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivation:
Our parsing of the initial line / http headers did treat some characters as separators which should better trigger an exception during parsing.
Modifications:
- Tighten up parsing of the inital line by follow recommentation of RFC7230
- Restrict separators to OWS for http headers
- Add unit test
Result:
Stricter parsing of HTTP1
Motivation:
We did had some System.out.println(...) call in a test which seems to be some left-over from debugging.
Modifications:
Remove System.out.println(...)
Result:
Code cleanup
Motivation
As part of a recent commit for issue
https://github.com/netty/netty/issues/9861 the HttpObjectDecoder was
changed to throw an IllegalArgumentException (and produce a failed
decoder result) when decoding a message with both "Transfer-Encoding:
chunked" and "Content-Length".
While it seems correct for Netty to try to sanitize these types of
messages, the spec explicitly mentions that the Content-Length header
should be *removed* in this scenario.
Both Nginx 1.15.9 and Tomcat 9.0.31 also opt to remove the header:
b693d7c198/java/org/apache/coyote/http11/Http11Processor.java (L747-L755)0ad4393e30/src/http/ngx_http_request.c (L1946-L1953)
Modifications
* Change the default behavior from throwing an IllegalArgumentException
to removing the "Content-Length" header
* Extract the behavior to a new protected method,
handleChunkedEncodingWithContentLength(), that can be overridden to
change this behavior (or capture metrics)
Result
Messages of this nature will now be successfully decoded and have their
"Content-Length" header removed, rather than creating invalid messages
(decoder result failures). Users will be allowed to override and
configure this behavior.
Motivation:
Need tests to ensure that CVE-2020-7238 is fixed.
Modifications:
Added two test cases into HttpRequestDecoderTest which check that
no whitespace is allowed before the Transfer-Encoding header.
Result:
Improved test coverage for #9861
Motivation:
Avoid allocation of default static `WebSocketServerProtocolConfig` and `WebSocketClientProtocolConfig` configs. Prefer compile time constants instead.
Modification:
Static field with config object replaced with constructor with default fields.
Result:
No more default config allocation and static field for it. Compile time variables used instead.
…in order to minimize pipeline
Motivation:
Handling of `WebSocketCloseFrame` is part of websocket protocol, so it's logical to put it within the `WebSocketProtocolHandler`. Also, removal of `WebSocketCloseFrameHandler` will decrease the channel pipeline.
Modification:
- `WebSocketCloseFrameHandler` code merged into `WebSocketProtocolHandler`. `WebSocketCloseFrameHandler` not added to the pipeline anymore
- Added additional constructor to `WebSocketProtocolHandler`
- `WebSocketProtocolHandler` now implements `ChannelOutboundHandler` and implements basic methods from it
Result:
`WebSocketCloseFrameHandler` is no longer used.
Fixes https://github.com/netty/netty/issues/9944
Motivation:
At the moment we add a handler which will respond with 403 forbidden if a websocket handshake is in progress (and after). This makes not much sense as it is unexpected to have a remote peer to send another http request when the handshake was started. In this case it is much better to let the websocket decoder bail out.
Modifications:
Remove usage of forbiddenHttpRequestResponder
Result:
Fixes https://github.com/netty/netty/issues/9913
Motivation:
We should remove WebSocketServerExtensionHandler from pipeline after successful WebSocket upgrade even if the client has not selected any extensions.
Modification:
Remove handler once upgrade is complete and no extensions are used.
Result:
Fixes#9939.
Motivation:
Utf8FrameValidator must release the input buffer if the validation fails to ensure no memory leak happens
Modifications:
- Catch exception, release frame and rethrow
- Adjust unit test
Result:
Fixes https://github.com/netty/netty/issues/9906
Motivation:
Currently, characters are appended to the encoded string char-by-char even when no encoding is needed. We can instead separate out codepath that appends the entire string in one go for better `StringBuilder` allocation performance.
Modification:
Only go into char-by-char loop when finding a character that requires encoding.
Result:
The results aren't so clear with noise on my hot laptop - the biggest impact is on long strings, both to reduce resizes of the buffer and also to reduce complexity of the loop. I don't think there's a significant downside though for the cases that hit the slow path.
After
```
Benchmark Mode Cnt Score Error Units
QueryStringEncoderBenchmark.longAscii thrpt 6 1.406 ± 0.069 ops/us
QueryStringEncoderBenchmark.longAsciiFirst thrpt 6 0.046 ± 0.001 ops/us
QueryStringEncoderBenchmark.longUtf8 thrpt 6 0.046 ± 0.001 ops/us
QueryStringEncoderBenchmark.shortAscii thrpt 6 15.781 ± 0.949 ops/us
QueryStringEncoderBenchmark.shortAsciiFirst thrpt 6 3.171 ± 0.232 ops/us
QueryStringEncoderBenchmark.shortUtf8 thrpt 6 3.900 ± 0.667 ops/us
```
Before
```
Benchmark Mode Cnt Score Error Units
QueryStringEncoderBenchmark.longAscii thrpt 6 0.444 ± 0.072 ops/us
QueryStringEncoderBenchmark.longAsciiFirst thrpt 6 0.043 ± 0.002 ops/us
QueryStringEncoderBenchmark.longUtf8 thrpt 6 0.047 ± 0.001 ops/us
QueryStringEncoderBenchmark.shortAscii thrpt 6 16.503 ± 1.015 ops/us
QueryStringEncoderBenchmark.shortAsciiFirst thrpt 6 3.316 ± 0.154 ops/us
QueryStringEncoderBenchmark.shortUtf8 thrpt 6 3.776 ± 0.956 ops/us
```
Motivation:
https://github.com/netty/netty/pull/9883 added a bug-fix for the Comparator in ClientCookieEncoder but did not add a testcase.
Modifications:
- Add testcase
- Simplify code
Result:
Include a test to ensure we not regress.
Motivation:
The current implementation causes IllegalArgumetExceptions to be thrown on Java 11.
The current implementation would violate comparison contract for two cookies C1 and C2 with same path length, since C1 < C2 and C2 < C1. Returning 0 (equality) does not since C1 == C2 and C2 == C1. See #9881
Modification:
Return equality instead of less than on same path length.
Result:
Fixes#9881.
Motivation:
In Java, it is almost always at least slower to use `ByteBuffer` than `byte[]` without pooling or I/O. `QueryStringDecoder` can use `byte[]` with arguably simpler code.
Modification:
Replace `ByteBuffer` / `CharsetDecoder` with `byte[]` and `new String`
Result:
After
```
Benchmark Mode Cnt Score Error Units
QueryStringDecoderBenchmark.noDecoding thrpt 6 5.612 ± 2.639 ops/us
QueryStringDecoderBenchmark.onlyDecoding thrpt 6 1.393 ± 0.067 ops/us
QueryStringDecoderBenchmark.mixedDecoding thrpt 6 1.223 ± 0.048 ops/us
```
Before
```
Benchmark Mode Cnt Score Error Units
QueryStringDecoderBenchmark.noDecoding thrpt 6 6.123 ± 0.250 ops/us
QueryStringDecoderBenchmark.onlyDecoding thrpt 6 0.922 ± 0.159 ops/us
QueryStringDecoderBenchmark.mixedDecoding thrpt 6 1.032 ± 0.178 ops/us
```
I notice #6781 switched from an array to `ByteBuffer` but I can't find any motivation for that in the PR. Unit tests pass fine with an array and we get a reasonable speed bump.
Motivation:
RFC7230 states that we should not accept multiple content-length headers and also should not accept a content-length header in combination with transfer-encoding: chunked
Modifications:
- Check for multiple content-length headers and if found mark message as invalid
- Check if we found a content-length header and also a transfer-encoding: chunked and if so mark the message as invalid
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9861
Motivation:
Technical speaking its valid to have http headers with no values so we should support it. That said we need to detect if these are "generated" because of an "invalid" fold.
Modifications:
- Detect if a colon is missing when parsing headers.
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9866
Motivation:
Client can split data into different numbers of fragments and sometimes the last frame may contain trash data that doesn't affect decompression process.
Modification:
Added check if last frame is `ContinuationWebSocketFrame` and decompression data is empty
then don't throw an exception.
Result:
Fixes#9770
Motivation:
Multiple cookie values can be present in a single header.
Modification:
Add `decodeAll` overload which returns all cookies
Result:
Fixes#7210
Note:
This change is not as perscriptive as the ideas brought up in the linked issue. Changing the Set implementation or the equals/compareTo definition is likely a breaking change, so they are practical.
Motivation:
HttpPostStandardRequestDecoder may throw multiple different exceptions in the constructor which could lead to memory leaks. We need to guard against this by explicit catch all of them and rethrow after we released any allocated memory.
Modifications:
- Catch, destroy and rethrow in any case
- Ensure we correctly wrap IllegalArgumentExceptions
- Add unit tests
Result:
Fixes https://github.com/netty/netty/issues/9829
### Motivation:
Those who need 'Origin' or 'Sec-WebSocket-Origin' headers should provide them explicitly, like it is stated in WebSocket specs.
E.g. through custom headers:
HttpHeaders customHeaders = new DefaultHttpHeaders()
.add(HttpHeaderNames.ORIGIN, "http://localhost:8080");
new WebSocketClientProtocolHandler(
new URI("ws://localhost:1234/test"), WebSocketVersion.V13, subprotocol,
allowExtensions, customHeaders, maxFramePayloadLength, handshakeTimeoutMillis)
### Modification:
* Remove enforced origin headers.
* Update tests
### Result:
Fixes#9673: Origin header is always sent from WebSocket client
Motivation:
By default CloseWebSocketFrames are handled automatically.
However I need manually manage their sending both on client- and on server-sides.
Modification:
Send close frame on channel close automatically, when it was not send before explicitly.
Result:
No more messages like "Connection closed by remote peer" for normal close flows.
### Motivation:
Introduction of `WebSocketDecoderConfig` made our server-side code more elegant and simpler for support.
However there is still some problem with maintenance and new features development for WebSocket codecs (`WebSocketServerProtocolHandler`, `WebSocketServerProtocolHandler`).
Particularly, it makes me ~~crying with blood~~ extremely sad to add new parameter and yet another one constructor into these handlers, when I want to contribute new feature.
### Modification:
I've extracted all parameters for client and server WebSocket handlers into config/builder structures, like it was made for decoders in PR #9116.
### Result:
* Fixes#9698: Simplify WebSocket handlers constructor arguments hell
* Unblock further development in this module (configurable close frame handling on server-side; automatic close-frame sending, when missed; memory leaks on protocol violations; etc...)
Bonuses:
* All defaults are gathered in one place and could be easily found/reused.
* New API greatly simplifies usage, but does NOT allow inheritance or modification.
* New API would simplify long-term maintenance of WebSockets module.
### Example
WebSocketClientProtocolConfig config = WebSocketClientProtocolConfig.newBuilder()
.webSocketUri("wss://localhost:8443/fx-spot")
.subprotocol("trading")
.handshakeTimeoutMillis(15000L)
.build();
ctx.pipeline().addLast(new WebSocketClientProtocolHandler(config));
Motivation:
At the moment we miss to poll the method queue when we see an Informational response code. This can lead to out-of-sync of request / response pairs when later try to compare these.
Modifications:
Always poll the queue correctly
Result:
Always compare the correct request / response pairs
Motivation:
HTTP 102 (WebDAV) is not correctly treated as an informational response
Modification:
Delegate all `1XX` status codes to superclass, not just `100` and `101`.
Result:
Supports WebDAV response.
Removes a huge maintenance [headache](https://github.com/line/armeria/pull/2210) in Armeria which has forked the class for these features
Motivation:
HttpPostRequestDecoder.splitHeaderContentType() throws a StringIndexOutOfBoundsException when it parses a Content-Type header that starts with a semicolon ;. We should skip the execution for incorrect multipart form data.
Modification:
Avoid invocation of HttpPostRequestDecoder#splitHeaderContentType(...) for incorrect multipart form data content-type.
Result:
Fixes#8554
Motivation:
We can use the `@SuppressJava6Requirement` annotation to be more precise about when we use Java6+ APIs. This helps us to ensure we always protect these places.
Modifications:
Make use of `@SuppressJava6Requirement` explicit
Result:
Fixes https://github.com/netty/netty/issues/2509.
### Motivation:
I've now found two libraries that use Netty to be vulnerable to [CWE-113: Improper Neutralization of CRLF Sequences in HTTP Headers ('HTTP Response Splitting')](https://cwe.mitre.org/data/definitions/113.html) due to using `new DefaultHttpHeaders(false)`.
Some part of me hopes that this warning will help dissuade library authors from disabling this important security check.
### Modification:
Add documentation to `DefaultHttpHeaders(boolean)` to warn about the implications of `false`.
### Result:
This improves the documentation on `DefaultHttpHeaders`.
Motivation:
Optimize the QueryStringEncoder for lower memory overhead and higher encode speed.
Modification:
Encode the space to + directly, and reuse the uriStringBuilder rather then create a new one.
Result:
Improved performance
Motivation:
When parsing HTTP headers special care needs to be taken when a whitespace is detected in the header name.
Modifications:
- Ignore whitespace when decoding response (just like before)
- Throw exception when whitespace is detected during parsing
- Add unit tests
Result:
Fixes https://github.com/netty/netty/issues/9571
Motivation:
At the current moment HttpContentEncoder handle only first value of multiple accept-encoding headers.
Modification:
Join multiple accept-encoding headers to one separated by comma.
Result:
Fixes#9553
Motivation:
Currently when HttpPostStandardRequestDecoder throws a ErrorDataDecoderException during construction we leak memory. We need to ensure all is released correctly.
Modifications:
- Call destroy() if parseBody() throws and rethrow the ErrorDataDecoderException
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9513.
Motivation:
We did not correctly pass all supplied parameters to the called constructor and so did not apply the timeout.
Modification:
Correctly pass on the parameters.
Result:
Use timeout
Motivation:
Some of the links in javadoc point to the obsolete drafts of HTTP/2
specifications. We should point them to the latest RFC 7540 or 7541.
Modifications:
Update links from `draft-ietf-httpbis-*` to the `rfc7540` and `rfc7541`.
Result:
Correct links in javadoc.
Motivation:
`HttpObjectDecoder` pre-checks that it doesn't request characters
outside of the `AppendableCharSequence`'s length. `0` is always allowed
because the minimal length of `AppendableCharSequence` is `1`. We can
legally skip index check by using
`AppendableCharSequence.charAtUnsafe(int)` in all existing cases in
`HttpObjectDecoder`.
Modifications:
- Use `AppendableCharSequence.charAtUnsafe(int)` instead of
`AppendableCharSequence.charAt(int)` in `HttpObjectDecoder`.
Result:
No unnecessary index checks in `HttpObjectDecoder`.
Motivation:
Http post request may be encoded as 'multipart/form-data' without any files and consist mixed attributes only.
Modifications:
- Do not double release attributes
- Add unit test
Result:
Code does not throw an IllegalReferenceCountException.
Motivation:
We need to ensure we replace WebSocketServerProtocolHandshakeHandler before doing the actual handshake as the handshake itself may complete directly and so forward pending bytes through the pipeline.
Modifications:
Replace the handler before doing the actual handshake.
Result:
Fixes https://github.com/netty/netty/issues/9471.
Motivation:
If all we need is the FileChannel we should better use RandomAccessFile as FileInputStream and FileOutputStream use a finalizer.
Modifications:
Replace FileInputStream and FileOutputStream with RandomAccessFile when possible.
Result:
Fixes https://github.com/netty/netty/issues/8078.
Motivation:
It was possible to produce a NPE when we for examples received more responses as requests as we did not check if the queue did not contain a method before trying to compare method names.
Modifications:
- Add extra null check
- Add unit tet
Result:
Fixes https://github.com/netty/netty/issues/9459
Motivation:
We did not correctly pass the mask parameters in all cases.
Modifications:
Correctly pass on parameters
Result:
Fixes https://github.com/netty/netty/issues/9463.
Motivation:
Allow to set the ORIGIN header value from custom headers in WebSocketClientHandshaker
Modification:
Only override header if not present already
Result:
More flexible handshaker usage
Motivation:
If the HttpUtil.getCharset method is called with an illegal charset like
"charset=!illegal!" it throws an IllegalCharsetNameException. But the javadoc
states, that defaultCharset is returned if incorrect header value. Since the
client sending the request sets the header value this should not crash.
Modification:
HttpUtil.getCharset catches the IllegalCharsetNameException and returns the
defualt value.
Result:
HttpUtil.getCharset does not throw IllegalCharsetNameException any more.
…ryWebSocketFrames
Motivation:
`Utf8FrameValidator` is always created and added to the pipeline in `WebSocketServerProtocolHandler.handlerAdded` method. However, for websocket connection with only `BinaryWebSocketFrame`'s UTF8 validator is unnecessary overhead. Adding of `Utf8FrameValidator` could be easily avoided by extending of `WebSocketDecoderConfig` with additional property.
Specification requires UTF-8 validation only for `TextWebSocketFrame`.
Modification:
Added `boolean WebSocketDecoderConfig.withUTF8Validator` that allows to avoid adding of `Utf8FrameValidator` during pipeline initialization.
Result:
Less overhead when using only `BinaryWebSocketFrame`within web socket.
Motivation:
Our QA servers are spammed with this messages:
13:57:51.560 DEBUG- Decoding WebSocket Frame opCode=1
13:57:51.560 DEBUG- Decoding WebSocket Frame length=4
I think this is too much info for debug level. It is better to move it to trace level.
Modification:
logger.debug changed to logger.trace for WebSocketFrameEncoder/Decoder
Result:
Less messages in Debug mode.