Commit Graph

8389 Commits

Author SHA1 Message Date
Violeta Georgieva
96f52e05bf Fix #6969: Do not reset the states while streaming Json array
Motivation:

Calling JsonObjectDecoder#reset while streaming Json array over multiple
writes causes CorruptedFrameException to be thrown.

Modifications:

While streaming Json array and if the current readerIndex has been reset,
ensure that the states will not be reset.

Result:

Fixes #6969
2017-07-17 10:42:54 +02:00
Scott Mitchell
6152990073 OpenSslEngine protocol selection must be contiguous
Motivation:
TLS doesn't support a way to advertise non-contiguous versions from the client's perspective, and the client just advertises the max supported version. The TLS protocol also doesn't support all different combinations of discrete protocols, and instead assumes contiguous ranges. OpenSSL has some unexpected behavior (e.g. handshake failures) if non-contiguous protocols are used even where there is a compatible set of protocols and ciphers. For these reasons this method will determine the minimum protocol and the maximum protocol and enabled a contiguous range from [min protocol, max protocol] in OpenSSL.

Modifications:
- ReferenceCountedOpenSslEngine#setEnabledProtocols should determine the min/max protocol versions and enable a contiguous range

Result:
OpenSslEngine is more consistent with the JDK's SslEngineImpl and no more unexpected handshake failures due to protocol selection quirks.
2017-07-13 08:17:38 -07:00
Scott Mitchell
43ae9748d0 Unify default cipher suites betweek JDK and OpenSSL
Motivation:
Currently the default cipher suites are set independently between JDK and OpenSSL. We should use a common approach to setting the default ciphers. Also the OpenSsl default ciphers are expressed in terms of the OpenSSL cipher name conventions, which is not correct and may be exposed to the end user. OpenSSL should also use the RFC cipher names like the JDK defaults.

Modifications:
- Move the default cipher definition to a common location and use it in JDK and OpenSSL initialization
- OpenSSL should not expose OpenSSL cipher names externally

Result:
Common initialization and OpenSSL doesn't expose custom cipher names.
2017-07-12 18:11:56 -07:00
Scott Mitchell
b249714a2d DNS Resovler tests should be more explicit about ndots
Motivation:
The DNS resolver may use default configuration inherited from the environment. This means the ndots value may change and result in test failure if the tests don't explicitly set the assumed value.

Modifications:
- Explicitly set ndots in resolver-dns unit tests so we don't fail if the environment overrides the search domain and ndots

Result:
Unit tests are less dependent upon the enviroment they run in.
Fixes https://github.com/netty/netty/issues/6966.
2017-07-12 15:49:45 -07:00
Carl Mastrangelo
e5455d31b3 Fix Race in ReferenceCountedOpenSslEngine
Motivation:
ReferenceCountedOpenSslEngine is careful to lock access to `ssl`
almost everywhere (manually verified) *except* in the constructor.
Since `ssl` is non-final, it does not enjoy automatic thread safety
of the code that uses it.  Specifically, that means netty tcnative
code is not thread safe.

Modifications:

Ensure that all ssl engine intialization and variables related to
it are properly synchronized  by adding in the constructor.

Result:
Less noisy race detector.

Notes:
The specific racing threads are:
```
  Read of size 8 at 0x7b5400019ff8 by thread T52 (mutexes: write M215300):
    #0 ssl_do_info_callback .../src/ssl/ssl_lib.c:2602:24 (f077793ecd812aeebb37296c987f655c+0x23c6834)
    #1 ssl_process_alert .../src/ssl/tls_record.c:473:3 (f077793ecd812aeebb37296c987f655c+0x23a5346)
    #2 tls_open_record .../src/ssl/tls_record.c:338:12 (f077793ecd812aeebb37296c987f655c+0x23a5289)
    #3 ssl3_get_record .../src/ssl/s3_pkt.c:146:7 (f077793ecd812aeebb37296c987f655c+0x23a3da0)
    #4 ssl3_read_app_data .../src/ssl/s3_pkt.c:388:17 (f077793ecd812aeebb37296c987f655c+0x23a368f)
    #5 ssl_read_impl .../src/ssl/ssl_lib.c:722:15 (f077793ecd812aeebb37296c987f655c+0x23c0895)
    #6 SSL_read .../src/ssl/ssl_lib.c:743:10 (f077793ecd812aeebb37296c987f655c+0x23c075b)
    #7 netty_internal_tcnative_SSL_readFromSSL .../netty_tcnative/openssl-dynamic/src/main/c/ssl.c:946:12 (f077793ecd812aeebb37296c987f655c+0x23827f7)
    #8 <null> <null> (0x7fc0760193be)
    #9 io.netty.handler.ssl.ReferenceCountedOpenSslEngine.readPlaintextData(Ljava/nio/ByteBuffer;)I (ReferenceCountedOpenSslEngine.java:449)
    #10 io.netty.handler.ssl.ReferenceCountedOpenSslEngine.unwrap([Ljava/nio/ByteBuffer;II[Ljava/nio/ByteBuffer;II)Ljavax/net/ssl/SSLEngineResult; (ReferenceCountedOpenSslEngine.java:882)
    #11 io.netty.handler.ssl.ReferenceCountedOpenSslEngine.unwrap([Ljava/nio/ByteBuffer;[Ljava/nio/ByteBuffer;)Ljavax/net/ssl/SSLEngineResult; (ReferenceCountedOpenSslEngine.java:985)
    #12 io.netty.handler.ssl.ReferenceCountedOpenSslEngine.unwrap(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;)Ljavax/net/ssl/SSLEngineResult; (ReferenceCountedOpenSslEngine.java:1028)
    #13 io.netty.handler.ssl.SslHandler$SslEngineType$1.unwrap(Lio/netty/handler/ssl/SslHandler;Lio/netty/buffer/ByteBuf;IILio/netty/buffer/ByteBuf;)Ljavax/net/ssl/SSLEngineResult; (SslHandler.java:206)
    #14 io.netty.handler.ssl.SslHandler.unwrap(Lio/netty/channel/ChannelHandlerContext;Lio/netty/buffer/ByteBuf;II)Z (SslHandler.java:1162)
    #15 io.netty.handler.ssl.SslHandler.decode(Lio/netty/channel/ChannelHandlerContext;Lio/netty/buffer/ByteBuf;Ljava/util/List;)V (SslHandler.java:1084)
    #16 io.netty.handler.codec.ByteToMessageDecoder.decodeRemovalReentryProtection(Lio/netty/channel/ChannelHandlerContext;Lio/netty/buffer/ByteBuf;Ljava/util/List;)V (ByteToMessageDecoder.java:489)
    #17 io.netty.handler.codec.ByteToMessageDecoder.callDecode(Lio/netty/channel/ChannelHandlerContext;Lio/netty/buffer/ByteBuf;Ljava/util/List;)V (ByteToMessageDecoder.java:428)
    #18 io.netty.handler.codec.ByteToMessageDecoder.channelRead(Lio/netty/channel/ChannelHandlerContext;Ljava/lang/Object;)V (ByteToMessageDecoder.java:265)
    #19 io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(Ljava/lang/Object;)V (AbstractChannelHandlerContext.java:362)
    #20 io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(Lio/netty/channel/AbstractChannelHandlerContext;Ljava/lang/Object;)V (AbstractChannelHandlerContext.java:348)
    #21 io.netty.channel.AbstractChannelHandlerContext.fireChannelRead(Ljava/lang/Object;)Lio/netty/channel/ChannelHandlerContext; (AbstractChannelHandlerContext.java:340)
    #22 io.netty.channel.DefaultChannelPipeline$HeadContext.channelRead(Lio/netty/channel/ChannelHandlerContext;Ljava/lang/Object;)V (DefaultChannelPipeline.java:1334)
    #23 io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(Ljava/lang/Object;)V (AbstractChannelHandlerContext.java:362)
    #24 io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(Lio/netty/channel/AbstractChannelHandlerContext;Ljava/lang/Object;)V (AbstractChannelHandlerContext.java:348)
    #25 io.netty.channel.DefaultChannelPipeline.fireChannelRead(Ljava/lang/Object;)Lio/netty/channel/ChannelPipeline; (DefaultChannelPipeline.java:926)
    #26 io.netty.channel.nio.AbstractNioByteChannel$NioByteUnsafe.read()V (AbstractNioByteChannel.java:134)
    #27 io.netty.channel.nio.NioEventLoop.processSelectedKey(Ljava/nio/channels/SelectionKey;Lio/netty/channel/nio/AbstractNioChannel;)V (NioEventLoop.java:644)
    #28 io.netty.channel.nio.NioEventLoop.processSelectedKeysOptimized()V (NioEventLoop.java:579)
    #29 io.netty.channel.nio.NioEventLoop.processSelectedKeys()V (NioEventLoop.java:496)
    #30 io.netty.channel.nio.NioEventLoop.run()V (NioEventLoop.java:458)
    #31 io.netty.util.concurrent.SingleThreadEventExecutor$5.run()V (SingleThreadEventExecutor.java:858)
    #32 io.netty.util.concurrent.DefaultThreadFactory$DefaultRunnableDecorator.run()V (DefaultThreadFactory.java:138)
    #33 java.lang.Thread.run()V (Thread.java:745)
    #34 (Generated Stub)

  Previous write of size 8 at 0x7b5400019ff8 by thread T97:
    #0 SSL_CTX_set_info_callback .../ssl/ssl_session.c:1136:22 (f077793ecd812aeebb37296c987f655c+0x23bd621)
    #1 netty_internal_tcnative_SSL_newSSL .../netty_tcnative/openssl-dynamic/src/main/c/ssl.c:830:5 (f077793ecd812aeebb37296c987f655c+0x2382306)
    #2 <null> <null> (0x7fc0760193be)
    #3 io.netty.handler.ssl.ReferenceCountedOpenSslEngine.<init>(Lio/netty/handler/ssl/ReferenceCountedOpenSslContext;Lio/netty/buffer/ByteBufAllocator;Ljava/lang/String;IZ)V (ReferenceCountedOpenSslEngine.java:237)
    #4 io.netty.handler.ssl.OpenSslEngine.<init>(Lio/netty/handler/ssl/OpenSslContext;Lio/netty/buffer/ByteBufAllocator;Ljava/lang/String;I)V (OpenSslEngine.java:31)
    #5 io.netty.handler.ssl.OpenSslContext.newEngine0(Lio/netty/buffer/ByteBufAllocator;Ljava/lang/String;I)Ljavax/net/ssl/SSLEngine; (OpenSslContext.java:49)
    #6 io.netty.handler.ssl.ReferenceCountedOpenSslContext.newEngine(Lio/netty/buffer/ByteBufAllocator;Ljava/lang/String;I)Ljavax/net/ssl/SSLEngine; (ReferenceCountedOpenSslContext.java:409)
    #7 io.netty.handler.ssl.ReferenceCountedOpenSslContext.newEngine(Lio/netty/buffer/ByteBufAllocator;)Ljavax/net/ssl/SSLEngine; (ReferenceCountedOpenSslContext.java:423)
    #8 io.grpc.netty.ProtocolNegotiators$ServerTlsHandler.handlerAdded(Lio/netty/channel/ChannelHandlerContext;)V (ProtocolNegotiators.java:133)
    #9 io.netty.channel.DefaultChannelPipeline.callHandlerAdded0(Lio/netty/channel/AbstractChannelHandlerContext;)V (DefaultChannelPipeline.java:597)
    #10 io.netty.channel.DefaultChannelPipeline.addLast(Lio/netty/util/concurrent/EventExecutorGroup;Ljava/lang/String;Lio/netty/channel/ChannelHandler;)Lio/netty/channel/ChannelPipeline; (DefaultChannelPipeline.java:226)
    #11 io.netty.channel.DefaultChannelPipeline.addLast(Lio/netty/util/concurrent/EventExecutorGroup;[Lio/netty/channel/ChannelHandler;)Lio/netty/channel/ChannelPipeline; (DefaultChannelPipeline.java:392)
    #12 io.netty.channel.DefaultChannelPipeline.addLast([Lio/netty/channel/ChannelHandler;)Lio/netty/channel/ChannelPipeline; (DefaultChannelPipeline.java:379)
    #13 io.grpc.netty.NettyServerTransport.start(Lio/grpc/internal/ServerTransportListener;)V (NettyServerTransport.java:99)
    #14 io.grpc.netty.NettyServer$1.initChannel(Lio/netty/channel/Channel;)V (NettyServer.java:164)
    #15 io.netty.channel.ChannelInitializer.initChannel(Lio/netty/channel/ChannelHandlerContext;)Z (ChannelInitializer.java:113)
    #16 io.netty.channel.ChannelInitializer.handlerAdded(Lio/netty/channel/ChannelHandlerContext;)V (ChannelInitializer.java:105)
    #17 io.netty.channel.DefaultChannelPipeline.callHandlerAdded0(Lio/netty/channel/AbstractChannelHandlerContext;)V (DefaultChannelPipeline.java:597)
    #18 io.netty.channel.DefaultChannelPipeline.access$000(Lio/netty/channel/DefaultChannelPipeline;Lio/netty/channel/AbstractChannelHandlerContext;)V (DefaultChannelPipeline.java:44)
    #19 io.netty.channel.DefaultChannelPipeline$PendingHandlerAddedTask.execute()V (DefaultChannelPipeline.java:1387)
    #20 io.netty.channel.DefaultChannelPipeline.callHandlerAddedForAllHandlers()V (DefaultChannelPipeline.java:1122)
    #21 io.netty.channel.DefaultChannelPipeline.invokeHandlerAddedIfNeeded()V (DefaultChannelPipeline.java:647)
    #22 io.netty.channel.AbstractChannel$AbstractUnsafe.register0(Lio/netty/channel/ChannelPromise;)V (AbstractChannel.java:506)
    #23 io.netty.channel.AbstractChannel$AbstractUnsafe.access$200(Lio/netty/channel/AbstractChannel$AbstractUnsafe;Lio/netty/channel/ChannelPromise;)V (AbstractChannel.java:419)
    #24 io.netty.channel.AbstractChannel$AbstractUnsafe$1.run()V (AbstractChannel.java:478)
    #25 io.netty.util.concurrent.AbstractEventExecutor.safeExecute(Ljava/lang/Runnable;)V (AbstractEventExecutor.java:163)
    #26 io.netty.util.concurrent.SingleThreadEventExecutor.runAllTasks(J)Z (SingleThreadEventExecutor.java:403)
    #27 io.netty.channel.nio.NioEventLoop.run()V (NioEventLoop.java:462)
    #28 io.netty.util.concurrent.SingleThreadEventExecutor$5.run()V (SingleThreadEventExecutor.java:858)
    #29 io.netty.util.concurrent.DefaultThreadFactory$DefaultRunnableDecorator.run()V (DefaultThreadFactory.java:138)
    #30 java.lang.Thread.run()V (Thread.java:745)
    #31 (Generated Stub)

```
2017-07-12 09:52:57 -07:00
Scott Mitchell
74140dbf53 Correct merge error from f7b3caeddc 2017-07-11 18:15:25 -07:00
Scott Mitchell
81fb2eede8 Revert "Revert "SslHandler avoid calling wrap/unwrap when unnecessary""
Motivation:
PR https://github.com/netty/netty/pull/6803 corrected an error in the return status of the OpenSslEngine. We should now be able to restore the SslHandler optimization.

Modifications:
- This reverts commit 7f3b75a509.

Result:
SslHandler optimization is restored.
2017-07-10 12:38:03 -07:00
Scott Mitchell
7cfe416182 Use unbounded queues from JCTools 2.0.2
Motivation:
JCTools 2.0.2 provides an unbounded MPSC linked queue. Before we shaded JCTools we had our own unbounded MPSC linked queue and used it in various places but gave this up because there was no public equivalent available in JCTools at the time.

Modifications:
- Use JCTool's MPSC linked queue when no upper bound is specified

Result:
Fixes https://github.com/netty/netty/issues/5951
2017-07-10 12:32:15 -07:00
Scott Mitchell
24263c2bd8 Fix merge issue from 86e653e04f 2017-07-10 12:31:16 -07:00
Scott Mitchell
86e653e04f SslHandler aggregation of plaintext data on write
Motivation:
Each call to SSL_write may introduce about ~100 bytes of overhead. The OpenSslEngine (based upon OpenSSL) is not able to do gathering writes so this means each wrap operation will incur the ~100 byte overhead. This commit attempts to increase goodput by aggregating the plaintext in chunks of <a href="https://tools.ietf.org/html/rfc5246#section-6.2">2^14</a>. If many small chunks are written this can increase goodput, decrease the amount of calls to SSL_write, and decrease overall encryption operations.

Modifications:
- Introduce SslHandlerCoalescingBufferQueue in SslHandler which will aggregate up to 2^14 chunks of plaintext by default
- Introduce SslHandler#setWrapDataSize to control how much data should be aggregated for each write. Aggregation can be disabled by setting this value to <= 0.

Result:
Better goodput when using SslHandler and the OpenSslEngine.
2017-07-10 12:22:08 -07:00
Scott Mitchell
f7b3caeddc OpenSslEngine option to wrap/unwrap multiple packets per call
Motivation:
The JDK SSLEngine documentation says that a call to wrap/unwrap "will attempt to consume one complete SSL/TLS network packet" [1]. This limitation can result in thrashing in the pipeline to decode and encode data that may be spread amongst multiple SSL/TLS network packets.
ReferenceCountedOpenSslEngine also does not correct account for the overhead introduced by each individual SSL_write call if there are multiple ByteBuffers passed to the wrap() method.

Modifications:
- OpenSslEngine and SslHandler supports a mode to not comply with the limitation to only deal with a single SSL/TLS network packet per call
- ReferenceCountedOpenSslEngine correctly accounts for the overhead of each call to SSL_write
- SslHandler shouldn't cache maxPacketBufferSize as aggressively because this value may change before/after the handshake.

Result:
OpenSslEngine and SslHanadler can handle multiple SSL/TLS network packet per call.

[1] https://docs.oracle.com/javase/7/docs/api/javax/net/ssl/SSLEngine.html
2017-07-10 12:15:02 -07:00
Nikolay Fedorovskikh
df568c739e Use ByteBuf#writeShort/writeMedium instead of writeBytes
Motivation:

1. Some encoders used a `ByteBuf#writeBytes` to write short constant byte array (2-3 bytes). This can be replaced with more faster `ByteBuf#writeShort` or `ByteBuf#writeMedium` which do not access the memory.
2. Two chained calls of the `ByteBuf#setByte` with constants can be replaced with one `ByteBuf#setShort` to reduce index checks.
3. The signature of method `HttpHeadersEncoder#encoderHeader` has an unnecessary `throws`.

Modifications:

1. Use `ByteBuf#writeShort` or `ByteBuf#writeMedium` instead of `ByteBuf#writeBytes` for the constants.
2. Use `ByteBuf#setShort` instead of chained call of the `ByteBuf#setByte` with constants.
3. Remove an unnecessary `throws` from `HttpHeadersEncoder#encoderHeader`.

Result:

A bit faster writes constants into buffers.
2017-07-10 14:37:41 +02:00
Norman Maurer
83db2b07b4 Also use realloc when shrink the buffer.
Motivation:

We should also use realloc when shrink the buffer to eliminate extra allocations / memory copies when possible.

Modifications:

Use realloc for expanding and shrinking when possible.

Result:

Less memory copies and allocations
2017-07-06 20:03:15 +02:00
Spencer Fang
ec490b2a88 HttpProxyHandler: allow setting headers
Motivation:

In some environments, the HTTP CONNECT handshake requires special headers to work.

Modification:

Update HttpProxyHandler to accept a HttpHeaders argument.

Result:

The header is passed along in the HTTP CONNECT request, and the proxy request can be successfully completed.
2017-07-06 20:02:06 +02:00
Norman Maurer
2a376eeb1b [maven-release-plugin] prepare for next development iteration 2017-07-06 13:24:06 +02:00
Norman Maurer
c7f8168324 [maven-release-plugin] prepare release netty-4.1.13.Final 2017-07-06 13:23:51 +02:00
Nikolay Fedorovskikh
016e00bf7a Clarify the appointment of the intermediate collection
Motivation:

An intermediate list is creating in the `EpollEventLoop#closeAll` to prevent ConcurrentModificationException. But this is not the obvious purpose has no comment.

Modifications:

Add comment to clarify the appointment of the intermediate collection.

Result:

More clear code.
2017-07-05 20:44:11 -04:00
Scott Mitchell
d3581b575e UnixResolverDnsServerAddressStreamProvider should allow for empty /etc/resolver dir
Motivation:
UnixResolverDnsServerAddressStreamProvider currently throws an exception if /etc/resolver exists but it empty. This shouldn't be an exception and can be tolerated as if there is no contribution from /etc/resolver.

Modifications:
- Treat /etc/resolver as present and empty the same as not being present

Result:
UnixResolverDnsServerAddressStreamProvider initialization can tolerate empty /etc/resolver directory.
2017-07-05 20:14:27 -04:00
Scott Mitchell
d040c939e5 UnixResolverDnsServerAddressStreamProviderTest failure
Motivation:
InetSocketAddress#getHostName() may attempt a reverse lookup which may lead to test failures because the expected address will not match.

Modifications:
- Use InetSocketAddress#getHostString() which will not attempt any lookups and instead return the original String

Result:
UnixResolverDnsServerAddressStreamProviderTest is more reliable.
2017-07-05 14:45:04 -04:00
Scott Mitchell
4d51eca218 SslHandlerTest#testCompositeBufSizeEstimationGuaranteesSynchronousWrite debug info
Motivation:
SslHandlerTest#testCompositeBufSizeEstimationGuaranteesSynchronousWrite has been observed to fail on CI servers. Knowing how many bytes were seen by the client would be helpful.

Modifications:
- Add bytesSeen to the exception if the client closes early.

Result:
More debug info available.
2017-07-05 14:06:02 -04:00
Norman Maurer
c318fc7cea Remove not needed intermediate collection while reading DatagramPackets in native transports
Motivation:

We used an intermediate collection to store the read DatagramPackets and only fired these through the pipeline once wewere done with the reading loop. This is not needed and can also increase memory usage.

Modifications:

Remove intermediate collection

Result:

Less overhead and possible less memory usage during read loop.
2017-07-05 18:20:05 +02:00
Scott Mitchell
6d80c641e9 DNS Resolver should be more consistent with JDK resolution
Motivation:
If there are multiple DNS servers to query Java's DNS resolver will attempt to resolve A and AAAA records in sequential order and will terminate with a failure once all DNS servers have been exhausted. Netty's DNS server will share the same DnsServerAddressStream for the different record types which may send the A question to the first host and the AAAA question to the second host. Netty's DNS resolution also may not progress to the next DNS server in all situations and doesn't have a means to know when resolution has completed.

Modifications:
- DnsServerAddressStream should support new methods to allow the same stream to be used to issue multiple queries (e.g. A and AAAA) against the same host.
- DnsServerAddressStream should support a method to determine when the stream will start to repeat, and therefore a failure can be returned.
- Introduce SequentialDnsServerAddressStreamProvider for sequential use cases

Result:
Fixes https://github.com/netty/netty/issues/6926.
2017-07-05 09:10:59 -04:00
Scott Mitchell
449befa003 Workaround IBM's J9 JVM getSupportedCipherSuites() returning SSL_ prefix cipher names
Motivation:
IBM's J9 JVM utilizes a custom cipher naming scheme with SSL_ prefix [1] instead of the TLS_ prefix defined by TLS RFCs and the JSSE cihper suite names [2]. IBM's documentation says that the SSL_ prefix are "interchangeable" with cipher names with the TLS_ prefix [1]. To work around this issue we parse the supported cipher list and see an SSL_ prefix we can also add the same cipher with the TLS_ prefix. For more details see a discussion on IBM's forums [3] and IBM's issue tracker [4].

[1] https://www.ibm.com/support/knowledgecenter/en/SSYKE2_8.0.0/com.ibm.java.security.component.80.doc/security-component/jsse2Docs/ciphersuites.html
[2] http://docs.oracle.com/javase/8/docs/technotes/guides/security/StandardNames.html#ciphersuites
[3] https://www.ibm.com/developerworks/community/forums/html/topic?id=9b5a56a9-fa46-4031-b33b-df91e28d77c2
[4] https://www.ibm.com/developerworks/rfe/execute?use_case=viewRfe&CR_ID=71770

Modifications:
- When parsing the supported cipher list to get the supported ciphers and we encounter a SSL_ prefix we should also add a TLS_ prefix cipher.
- Remove SSL_ prefix ciphers from Http2SecurityUtil.

Result:
Work around for IBM JVM's custom naming scheme covers more cases for supported cipher suites.
2017-07-05 09:05:42 -04:00
Nikolay Fedorovskikh
1ba265ad4d AbstractMethodError with barchart-udt
Motivation:

`SocketChannelUDT` from barchart-udt does not have the java 7 `public abstract SocketChannel bind(SocketAddress local)` method. Calling the abstract method `SocketChannel.bind(SocketAddress localAddress)` for `SocketChannelUDT` leads to an `AbstractMethodError` runtime error.

Modifications:

Make workaround with explicit call of `SocketChannelUDT.bind(SocketAddress local)` as it done in `NioUdtByteConnectorChannel`.

Result:

Fixes [#6934].
2017-07-05 07:35:32 +02:00
Norman Maurer
91b62da8c1 Remove @deprecation keyword on AbstractUnsafe.ensureOpen(...)
Motivation:

e845670043 marked AbstractUnsafe.ensureOpen(...) as deprecated for no reason.

Modifications:

Remove `@deprecation`

Result:

Remove incorrect annotation
2017-06-29 14:28:55 +02:00
Scott Mitchell
1df8f2ccd1 KQueue crash due to close/cleanup sequencing
Motivation:
The kqueue documentation states that 'Calling close() on a file descriptor will remove any kevents that reference the descriptor.' [1], but doesn't mention if this cleanup will be done synchronously. Under some circumstances it has been observed that cleanup was not done immediately and when KQueueEventLoop attempted to access the channel associated with the event the JVM would crash, a ClassCastException, or generally undefined behavior would occur because of invalid pointer references.

[1] https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2

Modifications:
- AbstractKqueueChannel#doClose should not rely upon this assumption and instead should call doDeregister() to ensure cleanup is done synchronously.
- Deleting a kevent should also set the jniSelfPtr stored in the udata of that kevent to NULL, to ensure we will not dereference it later.

Result:
No more kqueue crash due to close/cleanup sequencing.
2017-06-28 17:34:19 -04:00
Nikolay Fedorovskikh
8d0e0922a5 SocksCmdRequest and SocksCmdResponse are trying to convert host from IDN for the non-DOMAIN address types
Motivation:

In the SocksCmdRequest and SocksCmdResponse constructors a host param converts from IDN to ascii compatible form regardless address type.

Modifications:

Use `IDN#toASCII` only for `DOMAIN` address type.

Result:

More correct host handling in socks commands.
2017-06-28 20:34:45 +02:00
Nikolay Fedorovskikh
f35047765f Avoid a double check ByteBuf#ensureWritable in ByteBufUtil
Motivation:

Methods `ByteBufUtil#writeUtf8` and `ByteBufUtil#writeAscii` contains a check `ByteBuf#ensureWritable` before the calling `ByteBuf#writeBytes`. But the `ByteBuf#writeBytes` also do a such check inside.

Modifications:

Make checks more targeted.

Result:

Less redundant method calls.
2017-06-28 19:00:01 +02:00
Norman Maurer
b7a5743e8b Return the correct Future from FixedChannelPool.release()
Motivation:

The behaviour of the FixedChannelPool.release was inconsistent with the
SimpleChannelPool implementation, in that given promise is returned.

In the FixedChannelPool implementation a new promise was return and
this meant that the completion of that promise can be different.
Specifically on releasing a channel to a closed pool, the parameter
promise is failed with an IllegalStateException but the returned one
will have been successful (as it was completed by call to super
.release)

Modification:

Return the given promise as the result of FixedChannelPool.release

Result:

Returned promise will reflect the result of the release operation.
2017-06-28 18:57:10 +02:00
Norman Maurer
32b3f58f63 Close channels that are released to a closed FixedChannelPool.
Motivation:

Channels returned to a FixedChannelPool after closing it remain active.

Since channels that where acquired from the pool are not closed during the close operation, they remain open even after releasing the channel back to the pool where they are then in accessible and become in-effect a connection leak.

Modification:

Close the released channel on releasing back to a closed pool.

Result:

Much harder to create a connection leak by closing an active
FixedChannelPool instance.
2017-06-28 18:50:51 +02:00
Scott Mitchell
bc46a99eaa DefaultHttp2ConnectionEncoder#writeHeaders shouldn't send GO_AWAY if stream is closed
Motivation:
DefaultHttp2ConnectionEncoder#writeHeaders attempts to find a stream object, and if one doesn't exist it tries to create one. However in the event that the local endpoint has received a RST_STREAM frame before writing the response headers we attempt to create a stream. Since this stream ID is for the incorrect endpoint we then generate a GO_AWAY for what appears to be a protocol error, but can instead be failed locally.

Modifications:
- Just fail the local promise in the above situation instead of sending a GO_AWAY

Result:
Less severe consequences if the server asynchronously sends headers after a RST_STREAM has been received.
Fixes https://github.com/netty/netty/issues/6906.
2017-06-28 12:06:00 -04:00
Scott Mitchell
07a641900c transport-native-kqueue libraries should not lazy link
Motivation:
We rely upon the linker being non-lazy to test compatibility the native library compatibility for kqueue, but the default mode of operation is to lazy link.

Modifications:
- We should modify the build scripts to inform the linker that this library should not be lazy linked
- Error messages changes
dyld: lazy symbol binding failed: Symbol not found: _clock_gettime

java.lang.UnsatisfiedLinkError: unsupported JNI version 0xFFFFFFFF required by .../libnetty-transport-native-kqueue.dylib

Result:
Link errors are detected upon library load time.
2017-06-28 11:47:16 -04:00
Scott Mitchell
d3c44ef985 Update Http2SecurityUtil cipher suites
Motivation:
Mozilla's Server Side cipher suite recommendations have been updated [1].

[1] https://wiki.mozilla.org/Security/Server_Side_TLS#Modern_compatibility

Modifications:
- Update Http2SecurityUtil to exclude older ciphers.
- Remove support for DHE ciphersuites because they are now Intermediate and BoringSSL dropped support for these ciphers [2]

[2] https://boringssl.googlesource.com/boringssl/+/7e06de5d2d1b53c57c0c81e8d6ba4122b64cf626

Result:
Updated default ciphers for HTTP/2.
2017-06-28 11:40:28 -04:00
Norman Maurer
773757f2dd Introduce EpollSocketChannelConfig.setTcpKeepCnt as replacement for setTcpKeepCntl.
Motivation:

We had a typo in the method name of the EpollSocketChannelConfig.

Modifications:

Deprecate old method and introduce a new one.

Result:

Fixes [#6909]
2017-06-28 07:43:59 +02:00
Dmitriy Dumanskiy
dd69a813d4 Performance improvement for HttpRequestEncoder. Insert char into the string optimized.
Motivation:

Right now HttpRequestEncoder does insertion of slash for url like http://localhost?pararm=1 before the question mark. It is done not effectively.

Modification:

Code:

new StringBuilder(len + 1)
                .append(uri, 0, index)
                .append(SLASH)
                .append(uri, index, len)
                .toString();
Replaced with:

new StringBuilder(uri)
                .insert(index, SLASH)
                .toString();
Result:

Faster HttpRequestEncoder. Additional small test. Attached benchmark in PR.

Benchmark                                      Mode  Cnt        Score        Error  Units
HttpRequestEncoderInsertBenchmark.newEncoder  thrpt   40  3704843.303 ±  98950.919  ops/s
HttpRequestEncoderInsertBenchmark.oldEncoder  thrpt   40  3284236.960 ± 134433.217  ops/s
2017-06-27 10:53:43 +02:00
Norman Maurer
3b5dd4e9dc Change type of X_FRAME_OPTIONS and CONTENT_SECURITY_POLICY to AsciiString as a followup to cc1a209185 2017-06-27 08:37:46 +02:00
Nikolay Fedorovskikh
ba3616da3e Apply appropriate methods for writing CharSequence into ByteBuf
Motivation:

1. `ByteBuf` contains methods to writing `CharSequence` which optimized for UTF-8 and ASCII encodings. We can also apply optimization for ISO-8859-1.
2. In many places appropriate methods are not used.

Modifications:

1. Apply optimization for ISO-8859-1 encoding in the `ByteBuf#setCharSequence` realizations.
2. Apply appropriate methods for writing `CharSequences` into buffers.

Result:

Reduce overhead from string-to-bytes conversion.
2017-06-27 07:58:39 +02:00
Carl Mastrangelo
322fe8ec85 Exhaust non-exhaustive switch cases
Motivation:
ErrorProne warns about missing cases in switch statements that
appear as an oversight.

Modifcation:
Add the last case to statement to ensure all cases are covered.

Result:
Able to enable Error Prone static analysis
2017-06-27 07:56:41 +02:00
Norman Maurer
cc1a209185 Add content-security-policy and x-frame-options to HttpHeaderNames
Motivation:

These headers can be used to prevent clickjacking.

Modifications:

Add static fields for content-security-policy and x-frame-options

Result:

Expose general useful names
2017-06-27 07:55:25 +02:00
Norman Maurer
42789d43de Upgrade to netty-tcnative 2.0.5.Final 2017-06-25 19:03:33 +02:00
tonyshenkk
c8a23028ad fix UnixChannelUtil#isBufferCopyNeededForWrite
fix not execute unit test in transport-native-unix-common-tests module

Motivation:

- Commit 047da11 introduced an bug for still copy byteBuf for composed of n(n <= IOV_MAX) NIO direct buffers
- Commit 3c4dfed add UnixChannelUtilTest in transport-native-unix-common-tests module, but not execute in maven compile

as issue #6825, #6870

Modifications:

- modified UnixChannelUtil#isBufferCopyNeededForWrite(ByteBuf), and UnixChannelUtilTest
- move UnixChannelUtilTest into transport-native-unix-common module, and add packet scope method UnixChannelUtil#isBufferCopyNeededForWrite(ByteBuf, int)

Result:

- no copy byteBuf for composed of n(n <= IOV_MAX) NIO direct buffers
- auto execute unit tests in UnixChannelUtilTest and it is easier to mock IOV_MAX
2017-06-24 21:27:54 -07:00
Scott Mitchell
efe37e0d28 UnknownHostException should mention search domain if used
Motivation:
ba80fbbe05 modified the UnknownHostException to not include the search domain if the DNS query failed, but this masks what DNS query actually failed. Have the full hostname (including the search domain) provides more visibility and may help diagnose a configuration error if queries are unexpectedly failing.

Modifications:
- Remove DnsNameResolverContext#pristineHostname

Result:
UnknownHostException is more accurate and reflect what hostname actually resulted in failure.
2017-06-23 16:44:07 -07:00
Nikolay Fedorovskikh
d672a5a483 Optimizations in QueryStringEncoder
Motivation:

A life cycle of QueryStringEncoder is simple: create, append params, convert to String. Current realization collect params in the list, and calculate an URI string in `toString` method. We can simplify this: don't store params to the list, and immediately append parameters to the `StringBuilder`.

Modifications:

- Remove list for params and remove a tuple class `Param`.
- Use one common `StringBuilder` and append parameters into it.
- Resolve `TODO` in the `encodeParam` method.

Result:

Less allocations (no `ArrayList`, no `Param` tuples). Second `toString` call is faster.
2017-06-23 14:03:32 -07:00
Carl Mastrangelo
83de77fbe5 Make Native loading work better with Java 8
Motivation:
Enable static linking for Java 8.  These commits are the same as those introduced to netty tcnative.  The goal is to allow lots of JNI libraries to be statically linked together without having conflict `JNI_OnLoad` methods.

Modification:
* add JNI_OnLoad suffixes to enable static linking
* Add static names to the list of libraries that try to be loaded
* Enable compiling with JNI 1.8
* Sort includes

Result:
Enable statically linked JNI code.
2017-06-23 19:42:13 +02:00
Nikolay Fedorovskikh
c3bd1245c5 SocksCommonUtils cleanup
Motivation:

1. Internal class `SocksCommonUtils` contains a method `intToIp` that also exists in the `NetUtil`.
2. A `SocksCommonUtils#ipv6toCompressedForm` is never used.

Modifications:

1. Replace `intToIp` method usage with `NetUtil#intToIpAddress`.
2. Remove unused methods from `SocksCommonUtils`.

Result:

Less code for supports.
2017-06-23 19:04:03 +02:00
Nikolay Fedorovskikh
01eb428b39 Move methods for decode hex dump into StringUtil
Motivation:

PR #6811 introduced a public utility methods to decode hex dump and its parts, but they are not visible from netty-common.

Modifications:

1. Move the `decodeHexByte`, `decodeHexDump` and `decodeHexNibble` methods into `StringUtils`.
2. Apply these methods where applicable.
3. Remove similar methods from other locations (e.g. `HpackHex` test class).

Result:

Less code duplication.
2017-06-23 18:52:42 +02:00
Scott Mitchell
1767814a46 Replace DnsNameResolverContext#trace special code with an implementation of DnsQueryLifecycleObserver
Motivation:
DnsQueryLifecycleObserver is designed to capture the life cycle of every query. DnsNameResolverContext has a custom trace mechanism which consists of a StringBuilder and manual calls throughout the class. We can remove some special case code in DnsNameResolverContext and instead use a special implementation of DnsQueryLifecycleObserver when trace is enabled.

Modifications:
- Remove all references to the boolean trace variables in DnsNameResolverContext and DnsNameResolver
- Introduce TraceDnsQueryLifecycleObserver which will be used when trace is enabled and will log similar data as what trace currently provides

Result:
Less special case code in DnsNameResolverContext and instead delegate to TraceDnsQueryLifecycleObserver to capture trace information.
2017-06-23 09:04:59 -07:00
Scott Mitchell
1df722f65b kqueue version of 7baef4fbe8 2017-06-23 08:23:40 -07:00
Norman Maurer
58386aea43 Upgrade to netty-tcnative 2.0.4.Final 2017-06-23 13:43:51 +02:00
Carl Mastrangelo
cbde38f6e9 Add cause to thrown exception in SelfSignedCert
Motivation:
Exceptions with causes are easier to debug

Modification:
Add the cause when generating a SelfSignedCert

Results:
More debugging context
2017-06-23 07:24:11 +02:00