Motivation:
From the recent benchmark using gRPC-Java based on Netty's HTTP2, it appears that it prefers `ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256` over `ECDHE_ECDSA_WITH_AES_128_GCM_SHA256` since it uses the Netty HTTPS Cipher list as is. Both are considered safe but `ECDHE_ECDSA_WITH_AES_128_GCM_SHA256` has a good chance to get more optimized implementation. (e.g. AES-NI) When running both on GCP Intel Haswell VM, `TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256` spent 3x CPU time than `TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256`. (Note that this VM supports AES-NI)
From the cipher suites listed on `Intermediate compatibility (recommended)` of [Security/Server Side TLS](https://wiki.mozilla.org/Security/Server_Side_TLS#Modern_compatibility), they have a cipher preference which is aligned with this PR.
```
0x13,0x01 - TLS_AES_128_GCM_SHA256 TLSv1.3 Kx=any Au=any Enc=AESGCM(128) Mac=AEAD
0x13,0x02 - TLS_AES_256_GCM_SHA384 TLSv1.3 Kx=any Au=any Enc=AESGCM(256) Mac=AEAD
0x13,0x03 - TLS_CHACHA20_POLY1305_SHA256 TLSv1.3 Kx=any Au=any Enc=CHACHA20/POLY1305(256) Mac=AEAD
0xC0,0x2B - ECDHE-ECDSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AESGCM(128) Mac=AEAD
0xC0,0x2F - ECDHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(128) Mac=AEAD
0xC0,0x2C - ECDHE-ECDSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH Au=ECDSA Enc=AESGCM(256) Mac=AEAD
0xC0,0x30 - ECDHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=ECDH Au=RSA Enc=AESGCM(256) Mac=AEAD
0xCC,0xA9 - ECDHE-ECDSA-CHACHA20-POLY1305 TLSv1.2 Kx=ECDH Au=ECDSA Enc=CHACHA20/POLY1305(256) Mac=AEAD
0xCC,0xA8 - ECDHE-RSA-CHACHA20-POLY1305 TLSv1.2 Kx=ECDH Au=RSA Enc=CHACHA20/POLY1305(256) Mac=AEAD
0x00,0x9E - DHE-RSA-AES128-GCM-SHA256 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(128) Mac=AEAD
0x00,0x9F - DHE-RSA-AES256-GCM-SHA384 TLSv1.2 Kx=DH Au=RSA Enc=AESGCM(256) Mac=AEAD
```
Modification:
Moving up `AES_128_GCM_SHA256` in the CIPHERS of HTTPS so that it gets priority.
Result:
When connecting to the server supporting both `ECDHE_ECDSA_WITH_AES_128_GCM_SHA256` and `ECDSA_WITH_CHACHA20_POLY1305_SHA256` and respecting the client priority of cipher suites, it will be able to save significant cpu time when running it on machines with AES-NI support.
Motivation:
The result of `header.size()` is already cached in `headerSize`. There is no need to call it again actually.
Modification:
Replace the second `header.size()` with `headerSize` directly.
Result:
Improve performance slightly.
Motivation:
`getEntry(...)` may throw an IndexOutOfBoundsException without any error messages.
Modification:
Add detailed error message corresponding to the IndexOutOfBoundsException while calling `getEntry(...)` in HpackDynamicTable.java.
Result:
Easier to debug
Motivation:
`HpackDynamicTable` needs some test cases to ensure bug-free.
Modification:
Add unit test for `HpackDynamicTable`.
Result:
Improve test coverage slightly.
Motivation:
After searching the whole netty project, I found that the private method `translateHeader(...)` with empty body is never used actually. So I think it could be safely removed.
Modification:
Just remove this unused method.
Result:
Clean up the code.
Motivation:
`io.netty.handler.codec.http2.Http2Stream.State` is never used in DefaultHttp2LocalFlowController.java, and `io.netty.handler.codec.http2.HpackUtil.equalsConstantTime` is never used in HpackStaticTable.java.
Modification:
Just remove these unused imports.
Result:
Make imports cleaner.
Motivation:
`io.netty.handler.codec.http2.Http2CodecUtil.DEFAULT_PRIORITY_WEIGHT` is never used in DefaultHttp2ConnectionEncoder.java.
Modification:
Just remove this unused import.
Result:
Make the DefaultHttp2ConnectionEncoder.java's imports clean.
Motivation:
Http2ConnectionHandler may call ctx.close(...) with the same promise instance multiple times if the timeout for gracefulShutdown elapse and the listener itself is notified. This can cause problems as other handlers in the pipeline may queue these promises and try to notify these later via setSuccess() or setFailure(...) which will then throw an IllegalStateException if the promise was notified already
Modification:
- Add boolean flag to ensure doClose() will only try to call ctx.close(...) one time
Result:
Don't call ctx.close(...) with the same promise multiple times when gradefulShutdown timeout elapses.
Motivation:
Http2StreamChannelId is Serializable. A test case is needed to ensure that it works.
Modification:
Add a test case about serialization.
Result:
Improve test coverage slightly.
Motivation:
Under certain read patters the AbstractHttp2StreamChannel can fail to
flush, resulting in flow window starvation.
Modifications:
- Ensure we flush if we exit the `doBeginRead()` method.
- Account for the Http2FrameCodec always synchronously finishing writes
of window update frames.
Result:
Fixes#10072
Motivation:
At the moment the next / prev references are not set to "null" in the DefaultChannelHandlerContext once the ChannelHandler is removed. This is bad as it basically let users still use the ChannelHandlerContext of a ChannelHandler after it is removed and may produce very suprising behaviour.
Modifications:
- Fail if someone tries to use the ChannelHandlerContext once the ChannelHandler was removed (for outbound operations fail the promise, for inbound fire the error through the ChannelPipeline)
- Fix some handlers to ensure we not use the ChannelHandlerContext after the handler was removed
- Adjust DefaultChannelPipeline / DefaultChannelHandlerContext to fixes races with removal / replacement of handlers
Result:
Cleanup behaviour and make it more predictable for pipeline modifications
Motivation:
Even if it was stored in the string constant pool, I thought it was safe to compare it through the Equals() method.
Modification:
So, I changed "==" comparison to equals() comparison
Result:
It has become safer to compare String values with different references and with the same values.
Motivation:
We need to carefully manage flushes to ensure we not discard these by mistake due wrongly implemented consolidation of flushes.
Modifications:
- Ensure we reset flag before we actually call flush0(...)
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/10015
Motivation:
Users of the DefaultHttp2ConnectionDecodcer are notified of inbound GoAwayFrames
after the connection has already closed any ignored streams, potentially
losing the signal that some streams may have been ignored by the peer and
are thus retryable.
Modifications:
Reorder the notifications of the frame and connection listeners to
propagate the frame first, giving the frame listeners the opportunity to
clean up ignored streams in their own way.
Result:
Fixes#9986
Motivation:
ClearTextHttp2ServerUpgradeHandler is currently more complex then needed. We can simplify it by directly implement the prior-knowledge logic as part of the handler.
Modifications:
Merge inner PriorKnowledgeHandler logic into ClearTextHttp2ServerUpgradeHandler by extending ByteToMessageDecoder directly
Result:
Cleaner code and less pipeline operations
Motivation:
https://github.com/netty/netty/pull/9848 changed how we handled ChannelOptions internally to use a ConcurrentHashMap. This unfortunally had the side-effect that the ordering may be affected and not stable anymore. Here the problem is that sometimes we do validation based on two different ChannelOptions (for example we validate high and low watermarks against each other). Thus even if the user specified the options in the same order we may fail to configure them.
Modifications:
- Use again a LinkedHashMap to preserve order
Result:
Apply ChannelOptions in correct and expected order
Motivation:
In next major version of netty users should use ChannelHandler everywhere. We should ensure we do the same
Modifications:
Replace usage of deprecated classes / interfaces with ChannelHandler
Result:
Use non-deprecated code
Motivation:
ByteToMessageDecoder requires using an intermediate List to put results into. This intermediate list adds overhead (memory/CPU) which grows as the number of objects increases. This overhead can be avoided by directly propagating events through the ChannelPipeline via ctx.fireChannelRead(...). This also makes the semantics more clear and allows us to keep track if we need to call ctx.read() in all cases.
Modifications:
- Remove List from the method signature of ByteToMessageDecoder.decode(...) and decodeLast(...)
- Adjust all sub-classes
- Adjust unit tests
- Fix javadocs.
Result:
Adjust ByteToMessageDecoder as noted in https://github.com/netty/netty/issues/8525.
# Motivation:
`DefaultByteBufHolder.equals()` considers another object equal if it's an instance of `ByteBufferHolder` and if the contents of two objects are equal. However, the behavior of `equals` method is not a part of the `ByteBufHolder` contract so `DefaultByteBufHolder`'s version may be causing violation of the symmetric property if other classes have different logic.
There are already a few classes that are affected by this: `DefaultHttp2GoAwayFrame`, `DefaultHttp2UnknownFrame`, and `SctpMessage` are all overriding `equals` method breaking the symmetric property.
Another effect of this behavior is that all instances with empty data are considered equal. That may not be desireable in the situations when instances are created for predefined constants, e.g. `FullBulkStringRedisMessage.NULL_INSTANCE` and `FullBulkStringRedisMessage.EMPTY_INSTANCE` in `codec-redis`.
# Modification:
Make `DefaultByteBufHolder.equals()` implementation only work for the objects of the same class.
# Result:
- The symmetric property of the `equals` method is restored for the classes in question.
- Instances of different classes are not considered equal even if the content of the data they hold are the same.
Motivation:
We should use Objects.requireNonNull(...) as we require java8
Modifications:
Replace ObjectUtil.checkNonNull(...) with Objects.requireNonNull(...)
Result:
Code cleanup
Motivation:
The current implementation delegates to writeHeaders(ChannelHandlerContext ctx, int streamId, Http2Headers headers, int streamDependency, short weight, boolean exclusive, int padding, boolean endStream, ChannelPromise promise) that will send an header frame with the priority flag set and the default priority values even if the user didnt want too.
Modifications:
- Change DefaultHttp2ConnectionEncoder to call the correct Http2FrameWriter method depending on if the user wants to use priorities or not
- Adjust tests
Result:
Fixes https://github.com/netty/netty/issues/9842
Motivation:
97361fa2c8 replace synchronized with ConcurrentHashMap in *Bootstrap classes but missed to do the same for the Http2 variant.
Modifications:
- Use ConcurrentHashMap
- Simplify code in *Bootstrap classes
Result:
Less contention
Motivation:
We use the onStreamClosed(...) callback to return unconsumed bytes back to the window of the connection when needed. When this happens we will write a window update frame but not automatically call ctx.flush(). As the user has no insight into this it could in the worst case result in a "deadlock" as the frame is never written out ot the socket.
Modifications:
- If onStreamClosed(...) produces a window update frame call ctx.flush()
- Add unit test
Result:
No stales possible due unflushed window update frames produced by onStreamClosed(...) when not all bytes were consumed before the stream was closed
Motivation:
We can make use of EmbeddedChannel.finishAndReleaseAll() and so remove some code
Modifications:
Use finishAndReleaseAll()
Result:
Less code to maintain
Motivation:
At the moment we send a window update frame for the connection + stream when a stream is closed and there are unconsumed bytes left. While we need to do this for the connection it makes no sense to write a window update frame for the stream itself as it is already closed
Modifications:
- Don't write the window update frame for the stream when the stream is closed
- Add unit test
Result:
Don't write the window frame for closed streams
Motivation:
Http2ConnectionHandler tries to guard against sending multiple RST frames for the same stream. Unfortunally the code is not 100 % correct as it only updates the state after it calls write. This may lead to the situation of have an extra RST frame slip through if the second write for the RST frame is done from a listener that is attached to the promise.
Modifications:
- Update state before calling write
- Add unit test
Result:
Only ever send one RST frame per stream
Motivation:
There is an intrinsic race between a local session resetting a stream
and the peer no longer sending any frames. This can result in the
session receiving frames for a stream that the local peer no longer
tracks. This results in a StreamException being thrown which triggers a
RST_STREAM frame, which is a good thing, but also logging at level WARN,
which is noisy for an expected and benign condition.
Modification:
Change the log level to DEBUG when logging stream errors with code
STREAM_CLOSED. All others are more interesting and will continue to be
logged at level WARN.
Additionally, it was found that DATA frames for streams that could not
have existed only resulted in a StreamException when the spec is clear
that such a situation should be fatal to the connection, resulting in a
GOAWAY(PROTOCOL_ERROR).
Fixes#8025.
Motivation:
To avoid regression regarding connection-specific headers[1], we should add a test.
[1] https://tools.ietf.org/html/rfc7540#section-8.1.2.2
Modification:
Add test that checks the following headers are removed.
- Connection
- Host
- Keep-Alive
- Proxy-Connection
- Transfer-Encoding
- Upgrade
Result:
There's no functional change.
Motivation:
Padding was removed from CONTINUATION frame in http2-spec, as showed in [PR](https://github.com/http2/http2-spec/pull/510). We should follow it.
Modifications:
- Remove padding when writing CONTINUATION frame in DefaultHttp2FrameWriter
- Add a unit test for writing large header with padding
Result:
More spec-compliant
Motivation
Per javadoc in 4.1.x SimpleChannelInboundHandler:
"Please keep in mind that channelRead0(ChannelHandlerContext, I) will be
renamed to messageReceived(ChannelHandlerContext, I) in 5.0."
Modifications
Rename aforementioned method and all references/overrides.
Result
Method is renamed.
Motivation:
The javadocs of Http2Headers.method(...) are incorrect, we should fix these.
Modifications:
Correct javadocs
Result:
Fixes https://github.com/netty/netty/issues/8068.
Motivation:
Netty HTTP/2 implementation is not 100% compliant to the spec. This
commit improves the compliance regarding headers validation,
in particular pseudo-headers and connection ones.
According to the spec:
All HTTP/2 requests MUST include exactly one valid value for the
":method", ":scheme", and ":path" pseudo-header fields, unless it is
a CONNECT request (Section 8.3). An HTTP request that omits
mandatory pseudo-header fields is malformed (Section 8.1.2.6).
Modifications:
- Introduce Http2HeadersValidator class capable of validating HTTP/2
headers
- Invoke validation from DefaultHttp2ConnectionDecoder#onHeadersRead
- Modify tests to use valid headers when required
- Modify HttpConversionUtil#toHttp2Headers to not add :scheme and
:path header on CONNECT method in order to conform to the spec
Result:
- Initial requests without :method, :path, :scheme will fail
- Initial requests with multiple values for :method, :path, :scheme
will fail
- Initial requests with an empty :path fail
- Requests with connection-specific header field will fail
- Requests with TE header different than "trailers" will fail
-
- Fixes 8.1.2.2 tests from h2spec #5761
- Fixes 8.1.2.3 tests from h2spec #5761
Motivation:
Constant time comparison functions are used to compare HTTP/2 header
values, even if they are not sensitive.
Modification:
After checking for sensitivity, use fast comparison.
Result: Faster HPACK table reads/writes
Motivation:
We may fail to update the flow-controller and in this case need to notify the stream channel and close it.
Modifications:
Attach a future to the write of the update frame and in case of a failure propagate it to the channel and close it
Result:
Fixes https://github.com/netty/netty/issues/9663
Motivation:
bbc34d0eda introduced correct handling of "in process" setup of streams but there is some room for improvements. Often the writeHeaders(...) is completed directly which means there is not need to create the extra listener object.
Modifications:
- Only create the listener if we really need too.
Result:
Less GC
Motivation:
In https://github.com/netty/netty/issues/8692, `Http2FrameCodec` was
updated to keep track of all "being initialized" streams, allocating
memory before initialization begins, and releasing memory after
initialization completes successfully.
In some instances where stream initialization fails (e.g. because this
connection has received a GOAWAY frame), this memory is never released.
Modifications:
This change updates the `Http2FrameCodec` to use a separate promise
for monitoring the success of sending HTTP2 headers. When sending of
headers fails, we now make sure to release memory allocated for stream
initialization.
Result:
After this change, failures in writing HTTP2 Headers (e.g. because this
connection has received a GOAWAY frame) will no longer leak memory.
Motivation:
Http2MultiplexCodec extends Http2FrameCodec extends Http2ConnectionHandler. It appears Http2MultiplexCodec overrode the channelWritabilityChanged method, which prevented the flow controller from becoming active. In the case the parent channel becomes unwritable, and then later becomes writable, it needs to indicate that the child channels can still write data. This is slightly confusing, because the child channels may still themselves be unwritable, but should still drain their data to the parent channel.
Modification:
Still propagate writability changes to the HTTP/2 flow controller
Result:
Fixes https://github.com/netty/netty/issues/9636
Motivation:
Native image compilation is failing without extra flags:
```
Warning: Aborting stand-alone image build. No instances of io.netty.buffer.UnpooledHeapByteBuf are allowed in the image heap as this class should be initialized at image runtime. Object has been initialized by the io.netty.handler.codec.http2.Http2ConnectionHandler class initializer with a trace:
at io.netty.buffer.Unpooled.wrappedBuffer(Unpooled.java:157)
at io.netty.handler.codec.http2.Http2ConnectionHandler.<clinit>(Http2ConnectionHandler.java:74)
. To fix the issue mark io.netty.buffer.UnpooledHeapByteBuf for build-time initialization with --initialize-at-build-time=io.netty.buffer.UnpooledHeapByteBuf or use the the information from the trace to find the culprit and --initialize-at-run-time=<culprit> to prevent its instantiation.
Detailed message:
Trace: object io.netty.buffer.ReadOnlyByteBuf
object io.netty.buffer.UnreleasableByteBuf
method io.netty.handler.codec.http2.Http2ConnectionHandler.access$500()
Call path from entry point to io.netty.handler.codec.http2.Http2ConnectionHandler.access$500():
at io.netty.handler.codec.http2.Http2ConnectionHandler.access$500(Http2ConnectionHandler.java:66)
at io.netty.handler.codec.http2.Http2ConnectionHandler$PrefaceDecoder.readClientPrefaceString(Http2ConnectionHandler.java:299)
at io.netty.handler.codec.http2.Http2ConnectionHandler$PrefaceDecoder.decode(Http2ConnectionHandler.java:239)
at io.netty.handler.codec.http2.Http2ConnectionHandler.decode(Http2ConnectionHandler.java:438)
at io.netty.handler.codec.ByteToMessageDecoder.decodeRemovalReentryProtection(ByteToMessageDecoder.java:505)
at io.netty.handler.codec.ByteToMessageDecoder.callDecode(ByteToMessageDecoder.java:444)
at io.netty.handler.codec.ByteToMessageDecoder.channelRead(ByteToMessageDecoder.java:283)
at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:374)
at io.netty.channel.AbstractChannelHandlerContext.access$600(AbstractChannelHandlerContext.java:56)
at io.netty.channel.AbstractChannelHandlerContext$7.run(AbstractChannelHandlerContext.java:365)
at com.oracle.svm.core.jdk.RuntimeSupport.executeHooks(RuntimeSupport.java:144)
at com.oracle.svm.core.jdk.RuntimeSupport.executeStartupHooks(RuntimeSupport.java:89)
at com.oracle.svm.core.JavaMainWrapper.runCore(JavaMainWrapper.java:143)
at com.oracle.svm.core.JavaMainWrapper.run(JavaMainWrapper.java:186)
at com.oracle.svm.core.code.IsolateEnterStub.JavaMainWrapper_run_5087f5482cc9a6abc971913ece43acb471d2631b(generated:0)
```
Modification:
Add `io.netty.handler.codec.http2.Http2ConnectionHandler` for runtime compilation, as the buffer library's `io.netty.buffer.UnpooledHeapByteBuf` is also marked for runtime.
Result:
Native image compilation works again.
Motivation:
`DefaultHttp2UnknownFrame#equals` may produce NPE due to
incorrect comparison of `stream` field.
Modification:
- Fix the `stream` field compare.
- Cleanup usage of class fields: use direct access instead of getters
(because the class is final).
Result:
No NPE in `equals` method.
Motivation:
Classes `AbstractHttp2StreamChannel.Http2StreamChannelConfig`
and `DnsNameResolver.AddressedEnvelopeAdapter` may be static:
it doesn't reference its enclosing instance.
Modification:
Add `static` modifier.
Result:
Prevents a possible memory leak and uses less memory per class instance.
Motivation:
At the moment we use Unpooled.buffer(...) in InboundHttp2ToHttpAdapter when we need to do a copy of the message. We should better use the configured ByteBufAllocator for the Channel
Modifications:
Change internal interface to also take the ByteBufAllocator as argument and use it when we need to allocate a ByteBuf.
Result:
Use the "correct" ByteBufAllocator in InboundHttp2ToHttpAdapter in all cases
Motivation:
At the moment we set release to false before we call writeData(...). This could let to the sitatuation that we will miss to release the message if writeData(...) throws. We should set release to false after we called writeData(...) to ensure the ownership of the buffer is correctly transferred.
Modifications:
- Set release to false after writeData(...) was successfully called only
Result:
No possibility for a buffer leak
Motivation:
We did miss to take Http2FrameCodecBuilder.isValidateHeaders() into account when a Http2FrameWriter was set on the builder and always assumed validation should be enabled.
Modifications:
Remove hardcode value and use configured value
Result:
Http2FrameCodecBuilder.isValidateHeaders() is respected in all cases
Motivation:
Error: Class that is marked for delaying initialization to run time got initialized during image building: io.netty.handler.codec.http2.Http2CodecUtil. Try marking this class for build-time initialization with --initialize-at-build-time=io.netty.handler.codec.http2.Http2CodecUtil
Error: Use -H:+ReportExceptionStackTraces to print stacktrace of underlying exception
Error: Image build request failed with exit status 1
Modification:
After debugging, it seems the culprit is io.netty.handler.codec.http2.Http2ClientUpgradeCodec, which also needs runtime initialisation.
Result:
Fixes #micronaut-projects/micronaut-grpc#8
Motiviation:
EmbeddedChannel currently is quite differently in terms of semantics to other Channel implementations. We should better change it to be more closely aligned and so have the testing code be more robust.
Modifications:
- Change EmbeddedEventLoop.inEventLoop() to only return true if we currenlty run pending / scheduled tasks
- Change EmbeddedEventLoop.execute(...) to automatically process pending tasks if not already doing so
- Adjust a few tests for the new semantics (which is closer to other Channel implementations)
Result:
EmbeddedChannel works more like other Channel implementations
Motivation:
At the moment it is quite easy to hit reentrance issues when you have multiple handlers in the pipeline and each of the handlers does not correctly protect against these. To make it easier for the user we should try to protect from these. The issue is usually if and inbound event will trigger and outbound event and this outbound event then against triggeres an inbound event. This may result in having methods in a ChannelHandler re-enter some method and so state can be corrupted or messages be re-ordered.
Modifications:
- Keep track of inbound / outbound operations in DefaultChannelHandlerContext and if reentrancy is detected break it by scheduling the action on the EventLoop. This will then be picked up once the method returns and so the reentrancy is broken up.
- Adjust tests which made strange assumptions about execution order
Result:
No more reentrancy of handlers possible.
Motivation:
Right now you can cancel the Future returned by
`Http2StreamChannelBootstrap.open()` and that will race with the
registration of the stream channel with the event loop, potentially
culminating in an `IllegalStateException` and potential resource leak.
Modification:
Ensure that the returned promise is uncancellable.
Result:
Should no longer see `IllegalStateException`s.
Motivation:
In the release (4.1.37) we introduced Http2MultiplexHandler as a
replacement of Http2MultiplexCodec. This did split the frame parsing from
the multiplexing to allow a more flexible way to handle frames and to make
the code cleaner. Unfortunally we did miss to special handle this in
Http2ClientUpgradeCodec and so did not correctly add Http2MultiplexHandler
to the pipeline before calling Http2FrameCodec.onHttpClientUpgrade(...).
This did lead to the situation that we did not correctly receive the event
on the Http2MultiplexHandler and so did not correctly created the
Http2StreamChannel for the upgrade stream. Because of this we ended up
with an NPE if a frame was dispatched to the upgrade stream later on.
Modifications:
- Correctly add Http2MultiplexHandler to the pipeline before calling Http2FrameCodec.onHttpClientUpgrade(...)
Result:
Fixes#9495.
Motivation:
Some of the links in javadoc point to the obsolete drafts of HTTP/2
specifications. We should point them to the latest RFC 7540 or 7541.
Modifications:
Update links from `draft-ietf-httpbis-*` to the `rfc7540` and `rfc7541`.
Result:
Correct links in javadoc.
Motivation:
We should better update the flow-controller on Channel.read() to reduce overhead and memory overhead.
See https://github.com/netty/netty/pull/9390#issuecomment-513008269
Modifications:
Move updateLocalWindowIfNeeded() to doBeginRead()
Result:
Reduce memory overhead
Motivation:
As we decorate the Http2FrameListener under the covers we should ensure the user can still access the original Http2FrameListener.
Modifications:
- Unwrap the Http2FrameListener in frameListener()
- Add unit test
Result:
Less suprises for users.
Motivation:
We recently introduced Http2ControlFrameLimitEncoderTest which did not correctly notify the goAway promises and so leaked buffers.
Modifications:
Correctly notify all promises and so release the debug data.
Result:
Fixes leak in HTTP2 test
Motivation:
It is possible for a remote peer to flood the server / client with empty DATA frames (without end_of_stream flag) set and so cause high CPU usage without the possibility to ever hit a limit. We need to guard against this.
See CVE-2019-9518
Modifications:
- Add a new config option to AbstractHttp2ConnectionBuilder and sub-classes which allows to set the max number of consecutive empty DATA frames (without end_of_stream flag). After this limit is hit we will close the connection. A limit of 10 is used by default.
- Add unit tests
Result:
Guards against CVE-2019-9518
Motivation:
Due how http2 spec is defined it is possible by a remote peer to flood us with frames that will trigger control frames as response, the problem here is that the remote peer can also just stop reading these (while still produce more of these) and so may drive us to the pointer where we either run out of memory or burn all CPU. To protect against this we need to implement some kind of limit that will tear down connections that cause the above mentioned situation.
See CVE-2019-9512 / CVE-2019-9514 / CVE-2019-9515
Modifications:
- Add Http2ControlFrameLimitEncoder which limits the number of queued control frames that were caused because of the remote peer.
- Allow to insert ths Http2ControlFrameLimitEncoder by setting AbstractHttp2ConnectionBuilder.encoderEnforceMaxQueuedControlFrames(...) to a number higher then 0. The default is 10000 which provides some protection by default but will hopefully not cause too many false-positives.
- Add unit tests
Result:
Protect against DDOS due control frames. Fixes CVE-2019-9512 / CVE-2019-9514 / CVE-2019-9515 .
Motivation:
We should delay the firing of the Http2ConnectionPrefaceAndSettingsFrameWrittenEvent by one EventLoop tick when using the Http2FrameCodec to ensure all handlers are added to the pipeline before the event is passed through it.
This is needed to workaround a race that could happen when the preface is send in handlerAdded(...) but a later handler wants to act on the event.
Modifications:
Offload firing of the event to the EventExecutor.
Result:
Fixes https://github.com/netty/netty/issues/9432.
Motivation:
306299323c introduced some code change to move the responsibility of creating the stream for the upgrade to Http2FrameCodec. Unfortunaly this lead to the situation of having newStream().setStreamAndProperty(...) be called twice. Because of this we only ever saw the channelActive(...) on Http2StreamChannel but no other events as the mapping was replaced on the second newStream().setStreamAndProperty(...) call.
Beside this we also did not use the correct handler for the upgrade stream in some cases
Modifications:
- Just remove the Http2FrameCodec.onHttpClientUpgrade() method and so let the base class handle all of it. The stream is created correctly as part of the ConnectionListener implementation of Http2FrameCodec already.
- Consolidate logic of creating stream channels
- Adjust unit test to capture the bug
Result:
Fixes https://github.com/netty/netty/issues/9395
Motivation:
When using the HTTP/2 multiplex implementation we need to ensure we correctly drain the buffered inbound data even if the RecvByteBufallocator.Handle tells us to stop reading in between.
Modifications:
Correctly loop through the buffered inbound data until the user does stop to request from it.
Result:
Fixes https://github.com/netty/netty/issues/9387.
Co-authored-by: Bryce Anderson <banderson@twitter.com>
Motivation:
We can easily reuse the Http2FrameStreamEvent instances and so reduce GC pressure as there may be multiple events per streams over the life-time.
Modifications:
Reuse instances
Result:
Less allocations
Motivation:
At the moment we lookup the ChannelHandlerContext used in Http2StreamChannelBootstrap each time the open(...) method is invoked. This is not needed and we can just cache it for later usage.
Modifications:
Cache ChannelHandlerContext in volatile field.
Result:
Speed up open(...) method implementation when called multiple times
Motivation:
If a read triggers a AbstractHttp2StreamChannel to close we can
get an NPE in the read loop.
Modifications:
Make sure that the inboundBuffer isn't null before attempting to
continue the loop.
Result:
No NPE.
Fixes#9337
Motivation:
The Http2FrameCodec should be responsible to create the upgrade stream.
Modifications:
Move code to create stream to Http2FrameCodec
Result:
More correct responsibility
Motivation:
Mark Http2StreamChannelBootstrap.open0(...) as deprecated as the user should not use it. It was marked as public by mistake.
Modifications:
Add deprecation warning.
Result:
User will be aware the method should not be used directly.
Motivation:
There are situations where the user may want to be more flexible when to send the PING acks for various reasons or be able to attach a listener to the future that is used for the ping ack. To be able to do so we should allow to manage the acks manually.
Modifications:
- Add constructor to DefaultHttp2ConnectionDecoder that allows to disable the automatically sending of ping acks (default is to send automatically to not break users)
- Add methods to AbstractHttp2ConnectionHandlerBuilder (and sub-classes) to either enable ot disable auto acks for pings
- Make DefaultHttp2PingFrame constructor public that allows to write acks.
- Add unit test
Result:
More flexible way of handling acks.
Motivation:
Netty homepage(netty.io) serves both "http" and "https".
It's recommended to use https than http.
Modification:
I changed from "http://netty.io" to "https://netty.io"
Result:
No effects.
Motivation:
Http2ConnectionHandler (and sub-classes) allow to configure a graceful shutdown timeout but only apply it if there is at least one active stream. We should always apply the timeout. This is also true when we try to send a GO_AWAY and close the connection because of an connection error.
Modifications:
- Always apply the timeout if one is configured
- Add unit test
Result:
Always respect gracefulShutdownTimeoutMillis
Motivation:
b3dba317d7 introduced the concept of Http2SettingsReceivedConsumer but did not correctly inplement DecoratingHttp2ConnectionEncoder.consumeRemoteSettings(...).
Modifications:
- Add missing `else` around the throws
- Add unit tests
Result:
Correctly implement DecoratingHttp2ConnectionEncoder.consumeRemoteSettings(...)
Motivation
The nice change made by @carl-mastrangelo in #9307 for lookup-table
based HPACK Huffman decoding can be simplified a little to remove the
separate flags field and eliminate some intermediate operations.
Modification
Simplify HpackHuffmanDecoder::decode logic including de-dup of the
per-nibble part.
Result
Less code, possibly better performance though not noticeable in a quick
benchmark.
Motivation:
We don't need the extra ChannelPromise when writing headers anymore in Http2FrameCodec. This also means we cal re-use a ChannelFutureListener and so not need to create new instances all the time.
Modifications:
- Just pass the original ChannelPromise when writing headers
- Reuse the ChannelFutureListener
Result:
Two less objects created when writing headers for an not-yet created stream.
Motivation:
ff0045e3e1 changed HpackHuffmanDecoder to use a lookup-table which greatly improved performance. We can squeeze out another 3% win by using an ByteProcessor which will reduce the number of bound-checks / reference-count-checks needed by processing byte-by-byte.
Modifications:
Implement logic with ByteProcessor
Result:
Another ~3% perf improvement which shows up when using h2load to simulate load.
`h2load -c 100 -m 100 --duration 60 --warm-up-time 10 http://127.0.0.1:8080`
Before:
```
finished in 70.02s, 620051.67 req/s, 20.70MB/s
requests: 37203100 total, 37203100 started, 37203100 done, 37203100 succeeded, 0 failed, 0 errored, 0 timeout
status codes: 37203100 2xx, 0 3xx, 0 4xx, 0 5xx
traffic: 1.21GB (1302108500) total, 41.84MB (43872600) headers (space savings 90.00%), 460.24MB (482598600) data
min max mean sd +/- sd
time for request: 404us 24.52ms 15.93ms 1.45ms 87.90%
time for connect: 0us 0us 0us 0us 0.00%
time to 1st byte: 0us 0us 0us 0us 0.00%
req/s : 6186.64 6211.60 6199.00 5.18 65.00%
```
With this change:
```
finished in 70.02s, 642103.33 req/s, 21.43MB/s
requests: 38526200 total, 38526200 started, 38526200 done, 38526200 succeeded, 0 failed, 0 errored, 0 timeout
status codes: 38526200 2xx, 0 3xx, 0 4xx, 0 5xx
traffic: 1.26GB (1348417000) total, 42.39MB (44444900) headers (space savings 90.00%), 466.25MB (488893900) data
min max mean sd +/- sd
time for request: 370us 24.89ms 15.52ms 1.35ms 88.02%
time for connect: 0us 0us 0us 0us 0.00%
time to 1st byte: 0us 0us 0us 0us 0.00%
req/s : 6407.06 6435.19 6419.74 5.62 67.00%
```
Motivation:
In the latest release we introduced Http2MultiplexHandler as a replacement of Http2MultiplexCodec. This did split the frame parsing from the multiplexing to allow a more flexible way to handle frames and to make the code cleaner. Unfortunally we did miss to special handle this in Http2ServerUpgradeCodec and so did not correctly add Http2MultiplexHandler to the pipeline before calling Http2FrameCodec.onHttpServerUpgrade(...). This did lead to the situation that we did not correctly receive the event on the Http2MultiplexHandler and so did not correctly created the Http2StreamChannel for the upgrade stream. Because of this we ended up with an NPE if a frame was dispatched to the upgrade stream later on.
Modifications:
- Correctly add Http2MultiplexHandler to the pipeline before calling Http2FrameCodec.onHttpServerUpgrade(...)
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9314.
Motivation:
b3dba317d7 added AbstractHttp2ConnectionBuilder.autoAckSettingsFrame(...) as protected method and made it public for Http2MultiplexCodecBuilder. Unfortunally it did miss to also make it public in Http2FrameCodecBuilder
Modifications:
Correctly override autoAckSettingsFrame in Http2FrameCodecBuilder and so make it usable when building Http2FrameCodec.
Result:
Be able to also configure autoAckSettingsFrame when Http2FrameCodec is used.
Motivation:
We should not propage Http2WindowUpdateFrames to the child channels at all as these are not really use-ful and should not be flow-controlled via `read()` anyway. In the other hand Http2ResetFrame is very useful but should be propagated via an user event so the user is aware of it directly even if the user stops reading.
Modifications:
- Dont propagate Http2WindowUpdateFrames when using Http2MultiplexHandler
- Use user event for Http2ResetFrame when using Http2MultiplexHandler
- Adjust javadoc of Http2MultiplexHandler
- Add unit tests
Result:
Fixes https://github.com/netty/netty/pull/8889 and https://github.com/netty/netty/pull/7635
Motivation:
Http2MultiplexCodec and Http2MultiplexHandler had a very strong coupling with Http2FrameCodec which we can reduce easily. The end-goal should be to have no coupling at all.
Modifications:
- Reduce coupling by move some common logic to Http2CodecUtil
- Move logic to check if a stream may have existed before to Http2FrameCodec
- Use ArrayDeque as replacement for custom double-linked-list which makes the code a lot more readable
- Use WindowUpdateFrame to signal consume bytes (just as users do when they use Http2FrameCodec directly)
Result:
Less coupling and cleaner code.
Motivation:
In the past we had the following class hierarchy:
Http2ConnectionHandler --- Http2FrameCodec -- Http2MultiplexCodec
This hierarchy makes it impossible to plug in any code that would like to act on Http2Frame and Http2StreamFrame which can be quite useful for various situations (like metrics, logging etc). Beside this it also made the implementtion very hacky. To allow easier maintainance and also allow more flexible costumizations we should split Http2MultiplexCodec and Http2FrameCode.
Modifications:
- Introduce Http2MultiplexHandler (which is a replacement for Http2MultiplexCodec when used together with Http2FrameCodec)
- Mark Http2MultiplexCodecBuilder and Http2MultiplexCodec as deprecated. People should use Http2FrameCodecBuilder / Http2FrameCodec together with Http2MultiplexHandlder in the future
- Adjust / Add tests
- Adjust examples
Result:
More flexible usage possible and less hacky / coupled implementation for http2 multiplexing
Motivation:
For HTTP/2 messages with multiple cookies HttpConversionUtil.addHttp2ToHttpHeaders spends a good portion of time creating throwaway StringBuilders.
Modification:
Handle cookies lazily by using a ThreadLocal StringBuilder and then converting it to the H1 header at the end.
Result:
Less allocations.
Motivation:
f945a071db decoupled the writability state from the flow controller but could lead to the situation of a lot of writability updates events were propagated to the child channels. This change ensure we only take into account if the parent channel becomes writable again before we try to set the child channels to writable.
Modifications:
Only listen for channel writability changes for if the parent channel becomes writable again.
Result:
Less writability updates.
Motivation:
We should decouple the writability state of the http2 child channels from the flow-controller and just tie it to its own pending bytes counter that is decremented by the parent Channel once the bytes were written.
Modifications:
- Decouple writability state of child channels from flow-contoller
- Update tests
Result:
Less coupling and more correct behavior. Fixes https://github.com/netty/netty/issues/8148.
Motivation:
b4e3c12b8e introduced code to avoid coupling
close() to graceful close. It also added some code which attempted to infer when
a graceful close was being done in writing of a GOAWAY to preserve the
"connection is closed when all streams are closed behavior" for the child
channel API. However the implementation was too overzealous and may preemptively
close the connection if there are not currently any open streams (and close if
there are any frames which create streams in flight).
Modifications:
- Decouple writing a GOAWAY from trying to infer if a graceful close is being
done and closing the connection. Even if we could enhance this logic (e.g.
wait to close until the second GOAWAY with no error) it is possible the user
doesn't want the connection to be closed yet. We can add a means for the codec
to orchestrate the graceful close in the future (e.g. write some special "close
the connection when all streams are closed") but for now we can just let the
application handle this.
Result:
Fixes https://github.com/netty/netty/issues/9207
Motivation:
The first final version of GraalVM was released which deprecated some flags. We should use the new ones.
Modifications:
Removes the use of deprecated GraalVM native-image flags
Adds a flag to initialize netty at build time.
Result:
Do not use deprecated flags
Motivation:
OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.
Modifications:
Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.
Result:
Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
Motivation:
Http2MultiplexCodec.DefaultHttp2StreamChannel currently only act on ClosedChannelException exceptions when checking for isAutoClose(). We should widen the scope here to IOException to be more consistent with AbstractChannel.
Modifications:
Replace instanceof ClosedChannelException with instanceof IOException
Result:
More consistent handling of isAutoClose()
Motivation:
GraalVM native images are a new way to deliver java applications. Netty is one of the most popular libraries however there are a few limitations that make it impossible to use with native images out of the box. Adding a few metadata (in specific modules will allow the compilation to success and produce working binaries)
Modification:
Added properties files in `META-INF` and substitutions classes (under `internal.svm`) will solve the compilation issues. The substitutions classes are not visible and do not have a public constructor so they are not visible to end users.
Result:
Fixes#8959
This fix is very conservative as it applies the minimum config required to build:
* pure netty servers
* vert.x applications
* grpc applications
The build is having trouble due to checkstyle which does not seem to be able to find the copyright notice on property files.
Motivation:
Http2ConnectionHandler#close(..) always runs the GOAWAY and graceful close
logic. This coupling means that a user would have to override
Http2ConnectionHandler#close(..) to modify the behavior, and the
Http2FrameCodec and Http2MultiplexCodec are not extendable so you cannot
override at this layer. Ideally we can totally decouple the close(..) of the
transport and the GOAWAY graceful closure process completely, but to preserve
backwards compatibility we can add an opt-out option to decouple where the
application is responsible for sending a GOAWAY with error code equal to
NO_ERROR as described in https://tools.ietf.org/html/rfc7540#section-6.8 in
order to initiate graceful close.
Modifications:
- Http2ConnectionHandler supports an additional boolean constructor argument to
opt out of close(..) going through the graceful close path.
- Http2FrameCodecBuilder and Http2MultiplexCodec expose
gracefulShutdownTimeoutMillis but do not hook them up properly. Since these
are already exposed we should hook them up and make sure the timeout is applied
properly.
- Http2ConnectionHandler's goAway(..) method from Http2LifecycleManager should
initiate the graceful closure process after writing a GOAWAY frame if the error
code is NO_ERROR. This means that writing a Http2GoAwayFrame from
Http2FrameCodec will initiate graceful close.
Result:
Http2ConnectionHandler#close(..) can now be decoupled from the graceful close
process, and immediately close the underlying transport if desired.
Motivaiton:
DefaultHttp2ConnectionEncoder uses SimpleChannelPromiseAggregator to combine two
operations into a single future status. However it directly uses the
SimpleChannelPromiseAggregator object instead of using the newPromise() method
in one case. This may result in premature completion of the aggregated future.
Modifications:
- DefaultHttp2ConnectionEncoder to use
SimpleChannelPromiseAggregator#newPromise() instead of directly using the
SimpleChannelPromiseAggregator instance when writing the settings ACK frame
Result:
More correct status for the SETTING ACK frame writing when auto settings ACK is
disabled.
Motivation:
The HTTP/2 codec will synchronously respond to a SETTINGS frame with a SETTINGS
ACK before the application sees the SETTINGS frame. The application may need to
adjust its state depending upon what is in the SETTINGS frame before applying
the remote settings and responding with an ACK (e.g. to adjust for max
concurrent streams). In order to accomplish this the HTTP/2 codec should allow
for the application to opt-in to sending the SETTINGS ACK.
Modifications:
- DefaultHttp2ConnectionDecoder should support a mode where SETTINGS frames can
be queued instead of immediately applying and ACKing.
- DefaultHttp2ConnectionEncoder should attempt to poll from the queue (if it
exists) to apply the earliest received but not yet ACKed SETTINGS frame.
- AbstractHttp2ConnectionHandlerBuilder (and sub classes) should support a new
option to enable the application to opt-in to managing SETTINGS ACK.
Result:
HTTP/2 allows for asynchronous SETTINGS ACK managed by the application.
Motivation:
Http2FrameCodec currently fails the write promise associated with creating a
stream with a Http2NoMoreStreamIdsException. However this means the user code
will have to listen to all write futures in order to catch this scenario which
is the same as receiving a GOAWAY frame. We can also simulate receiving a GOAWAY
frame from our remote peer and that allows users to consolidate graceful close
logic in the GOAWAY processing.
Modifications:
- Http2FrameCodec should simulate a DefaultHttp2GoAwayFrame when trying to
create a stream but the stream IDs have been exhausted.
Result:
Applications can rely upon GOAWAY for graceful close processing instead of also
processing write futures.
Motivation:
We should not throw check exceptions when the user calls sync*() but should better wrap it in a CompletionException to make it easier for people to reason about what happens.
Modifications:
- Change sync*() to throw CompletionException
- Adjust tests
- Add some more tests
Result:
Fixes https://github.com/netty/netty/issues/8521.
Motivation:
DefaultPromise requires an EventExecutor which provides the thread to notify listeners on and this EventExecutor can never change. We can remove the code that supported the possibility of a changing the executor as this is not possible anymore.
Modifications:
- Remove constructor which allowed to construct a *Promise without an EventExecutor
- Remove extra state
- Adjusted SslHandler and ProxyHandler for new code
Result:
Fixes https://github.com/netty/netty/issues/8517.
Motivation:
For what-ever reason Http2FrameLogger did extend ChannelHandlerAdapter but not override any of its methods. We should not extend it at all as it is not a ChannelHandler.
Modifications:
Remove extends
Result:
Less confusing / more correct / clear code.
Motivation:
In 42742e233f we already added default methods to Channel*Handler and deprecated the Adapter classes to simplify the class hierarchy. With this change we go even further and merge everything into just ChannelHandler. This simplifies things even more in terms of class-hierarchy.
Modifications:
- Merge ChannelInboundHandler | ChannelOutboundHandler into ChannelHandler
- Adjust code to just use ChannelHandler
- Deprecate old interfaces.
Result:
Cleaner and simpler code in terms of class-hierarchy.
Motivation:
com.puppycrawl.tools checkstyle < 8.18 was reported to contain a possible security flaw. We should upgrade.
Modifications:
- Upgrade netty-build and checkstyle.
- Fix checkstyle errors
Result:
Fixes https://github.com/netty/netty/issues/8968.
Motivation:
As we now us java8 as minimum java version we can deprecate ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter and just move the default implementations into the interfaces. This makes things a bit more flexible for the end-user and also simplifies the class-hierarchy.
Modifications:
- Mark ChannelInboundHandlerAdapter and ChannelOutboundHandlerAdapter as deprecated
- Add default implementations to ChannelInboundHandler / ChannelOutboundHandler
- Refactor our code to not use ChannelInboundHandlerAdapter / ChannelOutboundHandlerAdapter anymore
Result:
Cleanup class-hierarchy and make things a bit more flexible.
Motivation:
PromiseCombiner is not thread-safe and even assumes all added Futures are using the same EventExecutor. This is kind of fragile as we do not enforce this. We need to enforce this contract to ensure it's safe to use and easy to spot concurrency problems.
Modifications:
- Add new contructor to PromiseCombiner that takes an EventExecutor and deprecate the old non-arg constructor.
- Check if methods are called from within the EventExecutor thread and if not fail
- Correctly dispatch on the right EventExecutor if the Future uses a different EventExecutor to eliminate concurrency issues.
Result:
More safe use of PromiseCombiner + enforce correct usage / contract.
Motivation:
When more than one connection header is present in h2c upgrade request, upgrade fails. This is to fix that.
Modification:
In HttpServerUpgradeHandler's upgrade() method, check whether any of the connection header value is upgrade, not just the first header value which might return a different value other than upgrade.
Result:
Fixes#8846.
With this PR, now when multiple connection headers are sent with the upgrade request, upgrade will not fail.
Motivation:
We can replace some "hand-rolled" integer checks with our own static utility method to simplify the code.
Modifications:
Use methods provided by `ObjectUtil`.
Result:
Cleaner code and less duplication
Motivation:
We can just use Objects.requireNonNull(...) as a replacement for ObjectUtil.checkNotNull(....)
Modifications:
- Use Objects.requireNonNull(...)
Result:
Less code to maintain.
Motivation:
ChannelHandler.exceptionCaught(...) was marked as @deprecated as it should only exist in inbound handlers.
Modifications:
Remove ChannelHandler.exceptionCaught(...) and adjust code / tests.
Result:
Fixes https://github.com/netty/netty/issues/8527
Motivation:
We can use lambdas now as we use Java8.
Modification:
use lambda function for all package, #8751 only migrate transport package.
Result:
Code cleanup.
Motivation:
We need to update to a new checkstyle plugin to allow the usage of lambdas.
Modifications:
- Update to new plugin version.
- Fix checkstyle problems.
Result:
Be able to use checkstyle plugin which supports new Java syntax.
* Decouble EventLoop details from the IO handling for each transport to allow easy re-use of code and customization
Motiviation:
As today extending EventLoop implementations to add custom logic / metrics / instrumentations is only possible in a very limited way if at all. This is due the fact that most implementations are final or even package-private. That said even if these would be public there are the ability to do something useful with these is very limited as the IO processing and task processing are very tightly coupled. All of the mentioned things are a big pain point in netty 4.x and need improvement.
Modifications:
This changeset decoubled the IO processing logic from the task processing logic for the main transport (NIO, Epoll, KQueue) by introducing the concept of an IoHandler. The IoHandler itself is responsible to wait for IO readiness and process these IO events. The execution of the IoHandler itself is done by the SingleThreadEventLoop as part of its EventLoop processing. This allows to use the same EventLoopGroup (MultiThreadEventLoupGroup) for all the mentioned transports by just specify a different IoHandlerFactory during construction.
Beside this core API change this changeset also allows to easily extend SingleThreadEventExecutor / SingleThreadEventLoop to add custom logic to it which then can be reused by all the transports. The ideas are very similar to what is provided by ScheduledThreadPoolExecutor (that is part of the JDK). This allows for example things like:
* Adding instrumentation / metrics:
* how many Channels are registered on an SingleThreadEventLoop
* how many Channels were handled during the IO processing in an EventLoop run
* how many task were handled during the last EventLoop / EventExecutor run
* how many outstanding tasks we have
...
...
* Implementing custom strategies for choosing the next EventExecutor / EventLoop to use based on these metrics.
* Use different Promise / Future / ScheduledFuture implementations
* decorate Runnable / Callables when submitted to the EventExecutor / EventLoop
As a lot of functionalities are folded into the MultiThreadEventLoopGroup and SingleThreadEventLoopGroup this changeset also removes:
* AbstractEventLoop
* AbstractEventLoopGroup
* EventExecutorChooser
* EventExecutorChooserFactory
* DefaultEventLoopGroup
* DefaultEventExecutor
* DefaultEventExecutorGroup
Result:
Fixes https://github.com/netty/netty/issues/8514 .
Motivation:
We can use the diamond operator these days.
Modification:
Use diamond operator whenever possible.
Result:
More modern code and less boiler-plate.
Motivation:
Netty uses own Integer.compare and Long.compare methods. Since Java 7 we can use Java implementation instead.
Modification:
Remove own implementation
Result:
Less code to maintain
Motivation:
When a write error happens during writing of flowcontrolled data frames we miss to correctly detect this in the write loop which may result in an infinite loop as we will never detect that the frame should be removed from the queue.
Modifications:
- When we fail a flowcontrolled data frame we ensure that the next frame.write(...) call will signal back that the whole frame was handled and so can be removed.
- Add unit test.
Result:
Fixes https://github.com/netty/netty/issues/8707.
Motiviation:
Because of how we implemented the registration / deregistration of an EventLoop it was not possible to wrap an EventLoop implementation and use it with a Channel.
Modification:
- Introduce EventLoop.Unsafe which is responsible for the actual registration.
- Move validation of EventLoop / Channel combo to the EventLoop
- Add unit test that verifies that wrapping works
Result:
Be able to wrap an EventLoop and so add some extra functionality.
Motivation:
At the moment it’s possible to have a Channel in Netty that is not registered / assigned to an EventLoop until register(...) is called. This is suboptimal as if the Channel is not registered it is also not possible to do anything useful with a ChannelFuture that belongs to the Channel. We should think about if we should have the EventLoop as a constructor argument of a Channel and have the register / deregister method only have the effect of add a Channel to KQueue/Epoll/... It is also currently possible to deregister a Channel from one EventLoop and register it with another EventLoop. This operation defeats the threading model assumptions that are wide spread in Netty, and requires careful user level coordination to pull off without any concurrency issues. It is not a commonly used feature in practice, may be better handled by other means (e.g. client side load balancing), and therefore we propose removing this feature.
Modifications:
- Change all Channel implementations to require an EventLoop for construction ( + an EventLoopGroup for all ServerChannel implementations)
- Remove all register(...) methods from EventLoopGroup
- Add ChannelOutboundInvoker.register(...) which now basically means we want to register on the EventLoop for IO.
- Change ChannelUnsafe.register(...) to not take an EventLoop as parameter (as the EventLoop is supplied on custruction).
- Change ChannelFactory to take an EventLoop to create new Channels and introduce ServerChannelFactory which takes an EventLoop and one EventLoopGroup to create new ServerChannel instances.
- Add ServerChannel.childEventLoopGroup()
- Ensure all operations on the accepted Channel is done in the EventLoop of the Channel in ServerBootstrap
- Change unit tests for new behaviour
Result:
A Channel always has an EventLoop assigned which will never change during its life-time. This ensures we are always be able to call any operation on the Channel once constructed (unit the EventLoop is shutdown). This also simplifies the logic in DefaultChannelPipeline a lot as we can always call handlerAdded / handlerRemoved directly without the need to wait for register() to happen.
Also note that its still possible to deregister a Channel and register it again. It's just not possible anymore to move from one EventLoop to another (which was not really safe anyway).
Fixes https://github.com/netty/netty/issues/8513.
Motivation:
In Http2FrameCodec we made the incorrect assumption that we can only have 1 buffered outboundstream as maximum. This is not correct and we need to account for multiple buffered streams.
Modifications:
- Use a map to allow buffer multiple streams
- Add unit test.
Result:
Fixes https://github.com/netty/netty/issues/8692.
* Handling AUTO_READ should not be the responsibility of DefaultChannelPipeline but the Channel itself.
Motivation:
At the moment we do automatically call read() in the DefaultChannelPipeline when fireChannelReadComplete() / fireChannelActive() is called and the Channel is using auto read. This is nice in terms of sharing code but imho is not the responsibility of the ChannelPipeline implementation but the responsibility of the Channel implementation.
Modifications:
Move handing of auto read from DefaultChannelPipeline to Channel implementations.
Result:
More clear responsibiliy and not depending on implemention details of the ChannelPipeline.
Motiviation:
Http2FrameCodecTest and Http2MultiplexCodecTest were quite fragile and often not went through the whole pipeline which made testing sometimes hard and error-prone.
Modification:
- Refactor tests to have data flow through the whole pipeline and so made the test more robust (by testing the while implementation).
Result:
Easier to write tests for the codecs in the future and more robust testing in general.
Beside this it also fixes https://github.com/netty/netty/issues/6036.
Motivation:
We should always call ctx.read() even when AUTO_READ is false as flow-control is enforced by the HTTP/2 protocol.
See also https://tools.ietf.org/html/rfc7540#section-5.2.2.
We already did this before but not explicit and only did so because of some implementation details of ByteToMessageDecoder. It's better to be explicit here to not risk of breakage later on.
Modifications:
- Ensure we always call ctx.read() when AUTO_READ is false
- Add unit test.
Result:
No risk of staling the connection when HTTP/2 is used.
Motivation:
In windows if the project is in a path that contains whitespace,
resources cannot be accessed and tests fail.
Modifications:
Adds ResourcesUtil.java in netty-common. Tests use ResourcesUtil.java to access a resource.
Result:
Being able to build netty in a path containing whitespace
Motivation:
ByteBuf supports “marker indexes”. The intended use case for these is if a speculative operation (e.g. decode) is in process the user can “mark” and interface and refer to it later if the operation isn’t successful (e.g. not enough data). However this is rarely used in practice,
requires extra memory to maintain, and introduces complexity in the state management for derived/pooled buffer initialization, resizing, and other operations which may modify reader/writer indexes.
Modifications:
Remove support for marking and adjust testcases / code.
Result:
Fixes https://github.com/netty/netty/issues/8535.
Motivation:
9f9aa1a did some changes related to fixing how we handle ctx.read() in child channel but did incorrectly change some assert.
Modifications:
Fix assert to be correct.
Result:
Code does not throw an AssertionError due incorrect assert check.
Motivation:
Most of the maven modules do not explicitly declare their
dependencies and rely on transitivity, which is not always correct.
Modifications:
For all maven modules, add all of their dependencies to pom.xml
Result:
All of the (essentially non-transitive) depepdencies of the modules are explicitly declared in pom.xml
Motivation:
We did not correct respect ctx.read() calls while processing a read for a child Channel. This could lead to read stales when auto read is disabled and no other read was requested.
Modifications:
- Keep track of extra read() calls while processing reads
- Add unit tests that verify that read() is respected when triggered either in channelRead(...) or channelReadComplete(...)
Result:
Fixes https://github.com/netty/netty/issues/8209.
Motivation
DefaultHttp2FrameReader currently does a fair amount of "intermediate"
slicing which can be avoided.
Modifications
Avoid slicing the input buffer in DefaultHttp2FrameReader until
necessary. In one instance this also means retainedSlice can be used
instead (which may also avoid allocating).
Results
Less allocations when using http2.
Motivation:
When the DefaultHttp2ConnectionEncoder writes the initial headers for a new
locally created stream we create the stream in the half-closed state if the
end-stream flag is set which signals to the life cycle manager that the headers
have been sent. However, if we synchronously fail to write the headers the
life cycle manager then sends a RST_STREAM on our behalf which is a connection
level PROTOCOL_ERROR because the peer sees the stream in an IDLE state.
Modification:
Don't open the stream in the half-closed state if the end-stream flag is
set and let the life cycle manager take care of it.
Result:
Cleaner state management in the DefaultHttp2ConnectionEncoder.
Fixes#8434.
Motivation:
The `Http2StreamFrameToHttpObjectCodec` is marked `@Sharable` but mutates
an internal `HttpScheme` field every time it is added to a pipeline.
Modifications:
Instead of storing the `HttpScheme` in the handler we store it as an
attribute on the parent channel.
Result:
Fixes#8480.
Motivation:
There are log messages emitted from Http2ConnectionDecoder of the form
```
INF i.n.h.c.h.DefaultHttp2ConnectionDecoder ignoring HEADERS frame for stream RST_STREAM sent. {}
```
Modifications:
Remove the trailing `{}` in the log message that doesn't have a value.
Result:
Log messages no longer have a trailing `{}`.
Motivation:
When writing an HTTP/2 HEADERS with END_STREAM=1, the application expects
the stream to be closed afterward. However, the write can fail locally
due to HPACK encoder and similar. When that happens we need to make sure
to issue a RST_STREAM otherwise the stream can be closed locally but
orphaned remotely. The RST_STREAM is typically handled by
Http2ConnectionHandler.onStreamError, which will only send a RST_STREAM
if that stream still exists locally.
There are two possible flows for trailers, one handled immediately and
one going through the flow controller. Previously they behaved
differently, with the immedate code calling the error handler after
closing the stream. The immediate code also used a listener for calling
closeStreamLocal while the flow controlled code did so immediately after
the write.
The two code paths also differed in their VoidChannelPromise handling,
but both were broken. The immediate code path called unvoid() only if
END_STREAM=1, however it could always potentially add a listener via
notifyLifecycleManagerOnError(). And the flow controlled code path
unvoided incorrectly, changing the promise completion behavior. It also
passed the wrong promise to closeStreamLocal() in FlowControlledBase.
Modifications:
Move closeStreamLocal handling after calls to onError. This is the
primary change.
Now call closeStreamLocal immediately instead of when the future
completes. This is the more likely correct behavior as it matches that
of DATA frames.
Fix all the VoidChannelPromise handling.
Result:
Http2ConnectionHandler.onStreamError sees the same state as the remote
and issues a RST_STREAM, properly cleaning up the stream.
Motivation:
Http2MultiplexCodec queues data internally if data is delivered from the
parent channel but the child channel did not request data. If the parent
channel notifies of a stream closure it is possible data in the queue
will be discarded before closing the channel.
Http2MultiplexCodec interacts with RecvByteBufAllocator to control the
child channel's demand for read. However it currently only ever reads a
maximum of one time per loop. This can thrash the read loop and bloat
the call stack if auto read is on, because channelReadComplete will
re-enter the read loop synchronously, and also neglect to deliver data
during the parent's read loop (if it is active). This also meant the
readPendingQueue was not utilized as originally intended (to extend the
child channel's read loop during the parent channel's read loop if
demand for data still existed).
Modifications:
- Modify the child channel's read loop to respect the
RecvByteBufAllocator, and append to the parents readPendingQueue if
appropriate.
- Stream closure notification behaves like EPOLL and KQUEUE transports
and reads all queued data, because the data is already queued in memory
and it is known there will be no more data. This will also replenish the
connection flow control window which may otherwise be constrained by a
closed stream.
Result:
More correct read loop and less risk of dropping data.
