Motivation:
We currently only cover ipv4 multicast in the testsuite but we should also have tests for ipv6.
Modifications:
- Add test for ipv6
- Ensure we only try to run multicast test for ipv4 / ipv6 if the loopback interface supports it.
Result:
Better test coverage
…nterface, block or loopback-mode-disabled operations).
Motivation:
Provide epoll/native multicast to support high load multicast users (we are using it for a high load telecomm app at my day job).
Modification:
Added support for (ipv4 only) source specific and any source multicast for epoll transport. Some caveats (beyond no ipv6 support initially - there’s a bit of work to add in join and leave group specifically around SSM, as ipv6 uses different data structures for this): no support for disabling loop back mode, retrieval of interface and block operation, all of which tend to be less frequently used.
Result:
Provides epoll transport multicast for IPv4 for common use cases. Understand if you’d prefer to hold off until ipv6 is included but not sure when I’ll be able to get to that.
Motivation:
Systems depending on Netty may benefit (telemetry, alternative even loop scheduling algorithms) from knowing the number of channels assigned to each EventLoop.
Modification:
Expose the number of channels registered in the EventLoop via SingleThreadEventLoop.registeredChannels.
Result:
Fixes#8276.
Motivation:
Since DomainSocketChannel is a DuplexChannel, which be able to shutdown input or output individually on demands, but ALLOW_HALF_CLOSURE channel option has not been supported yet.
I thought this could be a missing feature of Unix domain socket, so here the PR for it.
Modifications:
1. Added allHalfClosure property both in EpollDomainSocketChannelConfig and KQueueDomainSocketChannelConfig,
2. Enabled isAllowHalfClosure method of native channel to support domain channel config,
3. Created EpollDomainSocketShutdownOutputByPeerTest and KQueueDomainSocketShutdownOutputByPeerTest to verify the change.
Result:
ALLOW_HALF_CLOSURE channel option can be set with DomainSocketChannel, and no more warning of Unknown channel option 'ALLOW_HALF_CLOSURE'.
Motivation:
The SSLEngine does provide a way to signal to the caller that it may need to execute a blocking / long-running task which then can be offloaded to an Executor to ensure the I/O thread is not blocked. Currently how we handle this in SslHandler is not really optimal as while we offload to the Executor we still block the I/O Thread.
Modifications:
- Correctly support offloading the task to the Executor while suspending processing of SSL in the I/O Thread
- Add new methods to SslContext to specify the Executor when creating a SslHandler
- Remove @deprecated annotations from SslHandler constructor that takes an Executor
- Adjust tests to also run with the Executor to ensure all works as expected.
Result:
Be able to offload long running tasks to an Executor when using SslHandler. Partly fixes https://github.com/netty/netty/issues/7862 and https://github.com/netty/netty/issues/7020.
Motivation:
We missed to extend a few tests from the testsuite and so also run these with our native KQueue and Epoll transport.
Modifications:
Extend tests and so run these for our native transports as well.
Result:
More tests.
Motivation:
We need to update to a new checkstyle plugin to allow the usage of lambdas.
Modifications:
- Update to new plugin version.
- Fix checkstyle problems.
Result:
Be able to use checkstyle plugin which supports new Java syntax.
Motivation:
While using Load Balancers or HA support is needed there are cases when UDP channel need to bind to IP Address which is not available on network interfaces locally.
Modification:
Modified EpollDatagramChannelConfig to allow IP_FREEBIND option
Result:
Fixes ##8727.
Motivation:
https://github.com/netty/netty/issues/8444 reports that there is some issue with negative values passed to timerfd_settime. This test verifies that everything is working as expected.
Modifications:
Add testcase.
Result:
Test to verify expected behaviour.
Motivation:
epoll_wait should work in 4.1.30 like it did in 4.1.29.
Modifications:
Revert Integer.MAX_VALUE back to MAX_SCHEDULED_TIMERFD_NS (999,999,999).
Add unit test.
Result:
epoll_wait will no longer throw EINVAL.
Motivation:
Add an option (through a SelectStrategy return code) to have the Netty event loop thread to do busy-wait on the epoll.
The reason for this change is to avoid the context switch cost that comes when the event loop thread is blocked on the epoll_wait() call.
On average, the context switch has a penalty of ~13usec.
This benefits both:
The latency when reading from a socket
Scheduling tasks to be executed on the event loop thread.
The tradeoff, when enabling this feature, is that the event loop thread will be using 100% cpu, even when inactive.
Modification:
Added SelectStrategy option to return BUSY_WAIT
Epoll loop will do a epoll_wait() with no timeout
Use pause instruction to hint to processor that we're in a busy loop
Result:
When enabled, minimizes impact of context switch in the critical path
Motivation:
Epoll and Kqueue channels have internal state which forces
a single read operation after channel construction. This
violates the Channel#read() interface which indicates that
data shouldn't be delivered until this method is called.
The behavior is also inconsistent with the NIO transport.
Modifications:
- Epoll and Kqueue shouldn't unconditionally read upon
initialization, and instead should rely upon Channel#read()
or auto_read.
Result:
Epoll and Kqueue are more consistent with NIO.
Motivation:
We should allow to schedule tasks with a delay up to Long.MAX_VALUE as we did pre 4.1.25.Final.
Modifications:
Just ensure we not overflow and put the correct max limits in place when schedule a timer. At worse we will get a wakeup to early and then schedule a new timeout.
Result:
Fixes https://github.com/netty/netty/issues/7970.
Motivation:
DatagramPacket.recipient() doesn't return the actual destination IP, but the IP the app is bound to.
Modification:
- IP_RECVORIGDSTADDR option is enabled for UDP sockets, which allows retrieval of ancillary information containing the original recipient.
- _recvFrom(...) function from transport-native-unix-common/src/main/c/netty_unix_socket.c is modified such that if IP_RECVORIGDSTADDR is set, recvmsg is used instead of recvfrom; enabling the retrieval of the original recipient.
- DatagramSocketAddress also contains a 'local' address, representing the recipient.
- EpollDatagramChannel is updated to return the retrieved recipient address instead of the address the channel is bound to.
Result:
Fixes#4950.
Motivation:
Using a very huge delay when calling schedule(...) may cause an Selector error when calling select(...) later on. We should gaurd against such a big value.
Modifications:
- Add guard against a very huge value.
- Added tests.
Result:
Fixes [#7365]
Motivation:
b215794de3 recently introduced a change in behavior where writeSpinCount provided a limit for how many write operations were attempted per flush operation. However when the write quantum was meet the selector write flag was not cleared, and the channel unsafe flush0 method has an optimization which prematurely exits if the write flag is set. This may lead to no write progress being made under the following scenario:
- flush is called, but the socket can't accept all data, we set the write flag
- the selector wakes us up because the socket is writable, we write data and use the writeSpinCount quantum
- we then schedule a flush() on the EventLoop to execute later, however it the flush0 optimization prematurely exits because the write flag is still set
In this scenario the socket is still writable so the EventLoop may never notify us that the socket is writable, and therefore we may never attempt to flush data to the OS.
Modifications:
- When the writeSpinCount quantum is exceeded we should clear the selector write flag
Result:
Fixes https://github.com/netty/netty/issues/7729
Motivation:
IovArray implements MessageProcessor, and the processMessage method will continue to be called during iteration until it returns true. A recent commit b215794de3 changed the return value to only return true if any component of a CompositeByteBuf was added as a result of the method call. However this results in the iteration continuing, and potentially subsequent smaller buffers maybe added, which will result in out of order writes and generally corrupts data.
Modifications:
- IovArray#add should return false so that the MessageProcessor#processMessage will stop iterating.
Result:
Native transports which use IovArray will not corrupt data during gathering writes of CompositeByteBuf objects.
Motivation:
FileDescriptor#writev calls JNI code, and that JNI code dereferences a NULL pointer which crashes the application. This occurs when writing a single CompositeByteBuf object with more than one component.
Modifications:
- Initialize the iovec iterator properly to avoid the core dump
- Fix the array length calculation if we aren't able to fit all the ByteBuffer objects in the iovec array
Result:
No more core dump.
Motivation:
If a user calls EpollSocketChannelConfig.getOptions() and TCP_FASTOPEN_CONNECT is not supported we throw an exception.
Modifications:
- Just return 0 if ENOPROTOOPT is set.
- Add testcase
Result:
getOptions() works as epxected.
Motivation:
Even if it's a super micro-optimization (most JVM could optimize such
cases in runtime), in theory (and according to some perf tests) it
may help a bit. It also makes a code more clear and allows you to
access such methods in the test scope directly, without instance of
the class.
Modifications:
Add 'static' modifier for all methods, where it possible. Mostly in
test scope.
Result:
Cleaner code with proper 'static' modifiers.
Motivation:
When SO_LINGER is used we run doClose() on the GlobalEventExecutor by default so we need to ensure we schedule all code that needs to be run on the EventLoop on the EventLoop in doClose. Beside this there are also threading issues when calling shutdownOutput(...)
Modifications:
- Schedule removal from EventLoop to the EventLoop
- Correctly handle shutdownOutput and shutdown in respect with threading-model
- Add unit tests
Result:
Fixes [#7159].
Motivation:
The EPOLL transport uses EPOLLRDHUP to detect when the peer closes the write side of the socket. Currently KQueue is not able to mimic this behavior and the only way to detect if the peer has closed is to read. It may not always be appropriate to read for backpressure and other reasons at the application level.
Modifications:
- Support EVFILT_SOCK filter which provides notification when the peer closes the socket
Result:
KQueue transport has more consistent behavior with Epoll transport for detecting peer closure.
Motivation:
We did not correctly handle connect() and disconnect() in EpollDatagramChannel / KQueueDatagramChannel and so the behavior was different compared to NioDatagramChannel.
Modifications:
- Correct implement connect and disconnect methods
- Share connect and related code
- Add tests
Result:
EpollDatagramChannel / KQueueDatagramChannel also supports correctly connect() and disconnect() methods.
Motivation:
We should not try to detect a free port in tests put just use 0 when bind so there is no race in which the system my bind something to the port we choosen before.
Modifications:
- Remove the usage of TestUtils.getFreePort() in the testsuite
- Remove hack to workaround bind errors which will not happen anymore now
Result:
Less flacky tests.
Motivation:
When run the current testsuite on docker (mac) it will fail a few tests with:
io.netty.channel.AbstractChannel$AnnotatedConnectException: connect(..) failed: Cannot assign requested address: /0:0:0:0:0:0:0:0%0:46607
Caused by: java.net.ConnectException: connect(..) failed: Cannot assign requested address
Modifications:
Specify host explicit as done in other tests to only use ipv6 when really supported.
Result:
Build pass on docker as well
Motivation:
We only can call eventLoop() if we are registered on an EventLoop yet. As we just did this without checking we spammed the log with an error that was harmless.
Modifications:
Check if registered on eventLoop before try to deregister on close.
Result:
Fixes [#6770]
Motivation:
MacOS will throw an error when attempting to set the IP_TOS socket option if IPv6 is available, and also when getting the value for IP_TOS.
Modifications:
- Socket#setTrafficClass and Socket#getTrafficClass should try to use IPv6 first, and check if the error code indicates the protocol is not supported before trying IPv4
Result:
Fixes https://github.com/netty/netty/issues/6741.
Motivation:
We currently don't have a native transport which supports kqueue https://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2. This can be useful for BSD systems such as MacOS to take advantage of native features, and provide feature parity with the Linux native transport.
Modifications:
- Make a new transport-native-unix-common module with all the java classes and JNI code for generic unix items. This module will build a static library for each unix platform, and included in the dynamic libraries used for JNI (e.g. transport-native-epoll, and eventually kqueue).
- Make a new transport-native-unix-common-tests module where the tests for the transport-native-unix-common module will live. This is so each unix platform can inherit from these test and ensure they pass.
- Add a new transport-native-kqueue module which uses JNI to directly interact with kqueue
Result:
JNI support for kqueue.
Fixes https://github.com/netty/netty/issues/2448
Fixes https://github.com/netty/netty/issues/4231
Motivation:
EpollRecvByteAllocatorHandle intends to override the meaning of "maybe more data to read" which is a concept also used in all existing implementations of RecvByteBufAllocator$Handle but the interface doesn't support overriding. Because the interfaces lack the ability to propagate this computation EpollRecvByteAllocatorHandle attempts to implement a heuristic on top of the delegate which may lead to reading when we shouldn't or not reading data.
Modifications:
- Create a new interface ExtendedRecvByteBufAllocator and ExtendedHandle which allows the "maybe more data to read" between interfaces
- Deprecate RecvByteBufAllocator and change all existing implementations to extend ExtendedRecvByteBufAllocator
- transport-native-epoll should require ExtendedRecvByteBufAllocator so the "maybe more data to read" can be propagated to the ExtendedHandle
Result:
Fixes https://github.com/netty/netty/issues/6303.
Motivation:
I had a need to know the user credentials of a connected unix domain socket.
Modifications:
Added a class to encapsulate user credentials (UID, GID, and the PID).
Augemented the Socket class to provide the JNI native interface to return this new class
Augemented the c code to call getSockOpts passing <a href=http://man7.org/linux/man-pages/man7/socket.7.html>SO_PEERCRED</a>
Then surfaced the ability to get user credentials in the EpollDomainSocketChannel
Result:
The EpollDomainSocketChannel now has a the following function signature:
public PeerCredentials peerCredentials() throws IOException allowing a caller to get the UID, GID, and PID of the linux process
connected to the unix domain socket.
Motivation:
The NIO transport used an IllegalStateException if a user tried to issue another connect(...) while the connect was still in process. For this case the JDK specified a ConnectPendingException which we should use. The same issues exists in the EPOLL transport. Beside this the EPOLL transport also does not throw the right exceptions for ENETUNREACH and EISCONN errno codes.
Modifications:
- Replace IllegalStateException with ConnectPendingException in NIO and EPOLL transport
- throw correct exceptions for ENETUNREACH and EISCONN in EPOLL transport
- Add test case
Result:
More correct error handling for connect attempts when using NIO and EPOLL transport
Motivation:
We should throw a NotYetConnectedException when ENOTCONN errno is set. This is also consistent with NIO.
Modification:
Throw correct exception and add test case
Result:
More correct and consistent behavior.
Motivation:
The DuplexChannel is currently incomplete and only supports shutting down the output side of a channel. This interface should also support shutting down the input side of the channel.
Modifications:
- Add shutdownInput and shutdown methods to the DuplexChannel interface
- Remove state in NIO and OIO for tracking input being shutdown independent of the underlying transport's socket type. Tracking the state independently may lead to inconsistent state.
Result:
DuplexChannel supports shutting down the input side of the channel
Fixes https://github.com/netty/netty/issues/5175
Motivation:
We missed to correctly retrieve the localAddress() after we called Socket.connect(..) and so the user would always see an incorrect address when calling EpollSocketChannel.localAddress().
Modifications:
- Ensure we always retrieve the localAddress() after we called Socket.connect(...) as only after this we will be able to receive the correct address.
- Add unit test
Result:
Correct and consistent behaviour across different transports (NIO/OIO/EPOLL).
Motivation:
OIO/NIO use a volatile variable to track if a read is pending. EPOLL does not use a volatile an executes a Runnable on the event loop thread to set readPending to false. These mechansims should be consistent, and not using a volatile variable is preferable because the variable is written to frequently in the event loop thread.
OIO also does not set readPending to false before each fireChannelRead operation and may result in reading more data than the user desires.
Modifications:
- OIO/NIO should not use a volatile variable for readPending
- OIO should set readPending to false before each fireChannelRead
Result:
OIO/NIO/EPOLL are more consistent w.r.t. readPending and volatile variable operations are reduced
Fixes https://github.com/netty/netty/issues/5069
Motivation:
441aa4c575 introduced a bug in transport-native-epoll where readPending is set to false before a read is attempted, but this should happen before fireChannelRead is called. The NIO transport also only sets the readPending variable to false on the first read in the event loop. This means that if the user only calls read() on the first channelRead(..) the select loop will still listen for read events even if the user does not call read() on subsequent channelRead() or channelReadComplete() in the same event loop run. If the user only needs 2 channelRead() calls then by default they will may get 14 more channelRead() calls in the current event loop, and then 16 more when the event loop is woken up for a read event. This will also read data off the TCP stack and allow the peer to queue more data in the local RECV buffers.
Modifications:
- readPending should be set to false before each call to channelRead()
- make NIO readPending set to false consistent with EPOLL
Result:
NIO and EPOLL transport set readPending to false at correct times which don't read more data than intended by the user.
Fixes https://github.com/netty/netty/issues/5082
Motivation:
bfbef036a8 made EPOLL respect autoRead while in ET mode. However it is possible that we may miss data pending on the RECV queue if autoRead is off. This is because maybeMoreDataToRead is updated after fireChannelRead and if a user calls read() from here maybeMoreDataToRead will be false because it is updated after the fireChannelRead call. The way maybeMoreDataToRead was updated also causes a single channel to continuously read on the event loop and not relinquish and give other channels to try reading.
Modifications:
- Ensure maybeMoreDataToRead is always set after all user events, and is evaluated with readPending to execute a epollInReady on the EventLoop
- Combine the checkResetEpollIn and maybeMoreDataToRead logic to invoke a epollInReady later into the epollInFinally method due to similar responsibilities
- Update unit tests to reflect the user calling read() on the event loop from channelRead()
Result:
EPOLL ET with autoRead set to false will not leave data on the RECV queue.
Motivation:
We need to break out of the read loop for two reasons:
- If the input was shutdown in between (which may be the case when the user did it in the
fireChannelRead(...) method we should not try to read again to not produce any
miss-leading exceptions.
- If the user closes the channel we need to ensure we not try to read from it again as
the filedescriptor may be re-used already by the OS if the system is handling a lot of
concurrent connections and so needs a lot of filedescriptors. If not do this we risk
reading data from a filedescriptor that belongs to another socket then the socket that
was "wrapped" by this Channel implementation.
Modification:
Break the reading loop if the input was shutdown from within the channelRead(...) method.
Result:
No more meaningless exceptions and no risk to read data from wrong socket after the original was closed.
Motivation:
If SO_LINGER is set to 0 the EPOLL transport will send a FIN followed by a RST. This is not consistent with the behavior of the NIO transport. This variation in behavior can cause protocol violations in streaming protocols (e.g. HTTP) where a FIN may be interpreted as a valid end to a data stream, but RST may be treated as the data is corrupted and should be discarded.
https://github.com/netty/netty/issues/4170 Claims the behavior of NIO always issues a shutdown when close occurs. I could not find any evidence of this in Netty's NIO transport nor in the JDK's SocketChannel.close() implementation.
Modifications:
- AbstractEpollChannel should be consistent with the NIO transport and not force a shutdown on every close
- FileDescriptor to keep state in a consistent manner with the JDK and not allow a shutdown after a close
- Unit tests for NIO and EPOLL to ensure consistent behavior
Result:
EPOLL is capable of sending just a RST to terminate a connection.
Motivation:
To be consistent with the JDK we should ensure our native methods throw a ClosedChannelException if the Channel was previously closed. This will then be wrapped in a ChannelException as usual. For all other errors we continue to just throw a ChannelException directly.
Modifications:
Ensure getsockopt and setsockopt will throw a ClosedChannelException if the channel was closed before, on other errors we throw a ChannelException as before diretly.
Result:
Consistent with the NIO Channel implementations.
Motivation:
EpollServerSocketConfig.isFreebind() throws an exception when called.
Modifications:
Use the correct getsockopt arguments.
Result:
No more exception when call EpollServerSocketConfig.isFreebind()
Motivation:
EPOLL does not support autoread when in ET mode.
Modifications:
- EpollRecvByteAllocatorHandle should not unconditionally force reading just because ET is enabled
- AbstractEpollChannel and all derived classes which implement epollInReady must support a variable which indicates
there may be more data to read. The variable will be used when read is called to simulate a EPOLL wakeup and call epollInReady if necessary. This will ensure that if we don't read until EAGAIN that we will try to read again and not rely on EPOLL to notify us.
Result:
EPOLL ET supports auto read.
Motivation:
When using the native transport have support for TCP_DEFER_ACCEPT or / and TCP_QUICKACK can be useful.
Modifications:
- Add support for TCP_DEFER_ACCEPT and TCP_QUICKACK
- Ad unit tests
Result:
TCP_DEFER_ACCEPT and TCP_QUICKACK are supported now.
Motivation:
For on tests we expected a ConnectTimeoutException but used the default timeout of 10 seconds. This slows down testing.
Modifications:
Use connect timeout of 1 second in unit test.
Result:
Faster execution of unit test.
Motivation:
If Netty's class files are renamed and the type references are updated (shaded) the native libraries will not function. The native epoll module uses implicit JNI bindings which requires the fully qualified java type names to match the method signatures of the native methods. This means EPOLL cannot be used with a shaded Netty.
Modifications:
- Make the JNI method registration dynamic
- support a system property io.netty.packagePrefix which must be prepended to the name of the native library (to ensure the correct library is loaded) and all class names (to allow classes to be correctly referenced)
- remove system property io.netty.native.epoll.nettyPackagePrefix which was recently added and the code to support it was incomplete
Result:
transport-native-epoll can be used when Netty has been shaded.
Fixes https://github.com/netty/netty/issues/4800
Motivation:
When a wildcard address is used to bind a socket and ipv4 and ipv6 are usable we should accept both (just like JDK IO/NIO does).
Modifications:
Detect wildcard address and if so use in6addr_any
Result:
Correctly accept ipv4 and ipv6
Motivation:
If an user will close a Socket / FileDescriptor multiple times we should handle the extra close operations as NOOP.
Modifications:
Only do the actual closing one time
Result:
No exception if close is called multiple times.
Motivation:
We missed to define the actual c function for isKeepAlive(...) and so throw UnsatisfieldLinkError.
Modifications:
- Add function
- Add unit test for Socket class
Result:
Correctly work isKeepAlive(...) when using native transport
Motivation:
transport-native-epoll is designed to be specific to Linux. However there is native code that can be extracted out and made to work on more Unix like distributions. There are a few steps to be completely decoupled but the first step is to extract out code that can run in a more general Unix environment from the Linux specific code base.
Modifications:
- Move all non-Linux specific stuff from Native.java into the io.netty.channel.unix package.
- io.netty.channel.unix.FileDescriptor will inherit all the native methods that are specific to file descriptors.
- io_netty_channel_epoll_Native.[c|h] will only have code that is specific to Linux.
Result:
Code is decoupled and design is streamlined in FileDescriptor.