Motivation:
EmptyHeaders#get with a default value argument returns null. It should never return null, and instead it should return the default value.
Modifications:
- EmptyHeaders#get with a default value should return that default value
Result:
More correct implementation of the Headers API.
Motivation:
We had some code duplication in ChunkedWriteHandler.
Modifications:
Factor out duplicated code into private methods and reuse it.
Result:
Less code duplication.
Motivation:
We did not correctly set the stream id in the headers of HttpMessage when converting a Http2HeadersFrame. This is based on https://github.com/netty/netty/pull/7778 so thanks to @jprante.
Modifications:
- Correctly set the id when possible in the header.
- Add test case
Result:
Correctly include stream id.
Motivation:
DefaultChannelGroup.contains(...) did one more instanceof check then needed.
Modifications:
Simplify contains(...) and remove one instanceof check.
Result:
Simplier and cheaper implementation.
Motivation:
We missed to correctly record the stacktrace of the creation of an ResourceLeak record. This could either have the effect to log the wrote stacktrace for creation or not log a stacktrace at all if the object was dropped on the floor after it was created.
Modifications:
Correctly create a Record on creation of the object.
Result:
Fixes https://github.com/netty/netty/issues/7781.
Motivation:
Right now PendingWriteQueue.removeAndWriteAll collects all promises to
PromiseCombiner instance which sets listener to each given promise throwing
IllegalStateException on VoidChannelPromise which breaks while loop
and "reports" operation as failed (when in fact part of writes might be
actually written).
Modifications:
Check if the promise is not void before adding it to the PromiseCombiner
instance.
Result:
PendingWriteQueue.removeAndWriteAll succesfully writes all pendings
even in case void promise was used.
Motivation:
We currently not check if the buffer has a memory address and just assume this is the case if the nioBufferCount() == 1.
Modifications:
- Check hasMemoryAddress() before trying to access it.
- Add unit case.
Result:
More correct and robust code. Related to [#7752].
Motivation:
We should allow to access the memoryAddress / array of the FixedCompositeByteBuf when it only wraps a single ByteBuf. We do the same for CompositeByteBuf.
Modifications:
- Check how many buffers FixedCompositeByteBuf wraps and depending on it delegate the access to the memoryAddress / array
- Add unit tests.
Result:
Fixes [#7752].
Motivation:
We recently introduced ObjectCleaner which can be used to ensure some cleanup action is done once an object becomes weakable reachable. We should use this in Recycler.WeakOrderQueue to reduce the overhead of using a finalizer() (which will cause the GC to process it two times).
Modifications:
Replace finalizer() usage with ObjectCleaner
Result:
Fixes [#7343]
Motivation:
When using the JdkSslEngine, the ALPN class is used keep a reference
to the engine. In the event that the TCP connection fails, the
SSLEngine is not removed from the map, creating a memory leak.
Modification:
Always close the SSLEngine regardless of if the channel became
active. Also, record the SSLEngine was closed in all places.
Result:
Fixes: https://github.com/grpc/grpc-java/issues/3080
Motivation:
Android 5.0 sometimes not correctly update the bytesConsumed of the SSLEngineResult when consuming data from the input ByteBuffer. This will lead to handshake failures.
Modifications:
Add a workaround for Android 5.0
Result:
Be able to use netty on Android 5.0 by fixing https://github.com/netty/netty/issues/7758 .
Motivation:
We dont protect from overflow and so the timer may fire too early if a large timeout is used.
Modifications:
Add overflow guard and a test.
Result:
Fixes https://github.com/netty/netty/issues/7760.
Motivation:
The flush task is currently using flush() which will have the affect of have the flush traverse the whole ChannelPipeline and also flush messages that were written since we gave up flushing. This is not really correct as we should only continue to flush messages that were flushed at the point in time when the flush task was submitted for execution if the user not explicit call flush() by him/herself.
Modification:
Call *Unsafe.flush0() via the flush task which will only continue flushing messages that were marked as flushed before.
Result:
More correct behaviour when the flush task is used.
Motivation:
If someone invoke writeByte(), markWriterIndex(), readByte() in order first, and then invoke resetWriterIndex() should be throw a IndexOutOfBoundsException to obey the rule that the buffer declared "0 <= readerIndex <= writerIndex <= capacity".
Modification:
Changed the code writerIndex = markedWriterIndex; into writerIndex(markedWriterIndex); to make the check affect
Result:
Throw IndexOutOfBoundsException if any invalid happened in resetWriterIndex.
Motivation:
Read-only heap ByteBuffer doesn't expose array: the existent method to perform copies to direct ByteBuf involves the creation of a (maybe pooled) additional heap ByteBuf instance and copy
Modifications:
To avoid stressing the allocator with additional (and stealth) heap ByteBuf allocations is provided a method to perform copies using the (pooled) internal NIO buffer
Result:
Copies from read-only heap ByteBuffer to direct ByteBuf won't create any intermediate ByteBuf
Motivation:
We called the wrong super method in the test and also had a few unused imports.
Modifications:
Fix super method call and cleanup.
Result:
More correct test and cleanup.
Motivation:
When the response is very small, compression will inflate the response.
Modifications:
Add filed io.netty.handler.codec.http.HttpContentCompressor#compressThreshold that control whether the HTTP response should be compressed.
Result:
Fixes#7660.
Motivation:
KQueue implementations current have inconsistent behavior with Epoll implementations with respect to asynchronous sockets and connecting. In the Epoll transport we attempt to connect, if the connect call does not synchornously fail/succeed we set the EPOLLOUT which will be triggered by the kernel if the connection attempt succeeds or an error occurs. The connect API provides no way to asynchronously communicate an error so the Epoll implementation fires a EPOLLOUT event and puts the connect status in getsockopt(SO_ERROR). KQueue provides the same APIs but different behavior. If the EVFILT_WRITE is not enabled and the EVFILT_READ is enabled before connect is called, and there is an error the kernel may fire the EVFILT_READ filter and provide the Connection Refused error via read(). This is even true if we set the EVFILT_WRITE filter after calling connect because connect didn't synchornously complete. After the error has been delievered via read() a call to getsockopt(SO_ERROR) will return 0 indicating there is no error. This means we cannot rely upon the KQueue based kernel to deliver connection errors via the EVFILT_WRITE filter in the same way that the linux kernel does with the EPOLLOUT flag.
ce241bd introduced a change which depends upon the behavior of the EVFILT_WRITE being set and may prematurely stop writing to the OS as a result, becaues we assume the OS will notify us when the socket is writable. However the current work around for the above described behavior is to initialize the EVFILT_WRITE to true for connection oriented protocols. This leads to prematurely exiting from the flush() which may lead to deadlock.
Modifications:
- KQueue should check when an error is obtained from read() if the connectPromise has not yet been completed, and if not complete it with a ConnectException
Result:
No more deadlock in KQueue due to asynchronous connect workaround.
Motivation:
When we do DNS queries we need to ensure we always release the AddressEnvelope.
Modifications:
Also release the AddressEnvelope if the original resolution was done in the meantime and we did not cancel the extra query yet.
Result:
Should fix [#7713]
Motivation:
The Snappy decoder was failing on valid inputs containing literals
with 2-byte lengths > 0x8000 or copies with 2-byte offsets >= 0x8000.
The decoder was also enforcing an artificially low offset limit of
0x7FFF, something the Snappy format description advises against,
and which prevents decoding valid inputs generated by other encoders.
Modifications:
Interpret 2-byte literal lengths and 2-byte copy offsets as unsigned
shorts, in accordance with the format description and reference
implementation.
Allow any positive offset value. Throw an appropriate exception
for negative values (which can theoretically occur due to arithmetic
overflow on 4-byte offsets, but are unlikely to occur in the wild).
Result:
The Snappy decoder can handle valid inputs that previously caused
it to throw exceptions.
Motivation:
b215794de3 recently introduced a change in behavior where writeSpinCount provided a limit for how many write operations were attempted per flush operation. However when the write quantum was meet the selector write flag was not cleared, and the channel unsafe flush0 method has an optimization which prematurely exits if the write flag is set. This may lead to no write progress being made under the following scenario:
- flush is called, but the socket can't accept all data, we set the write flag
- the selector wakes us up because the socket is writable, we write data and use the writeSpinCount quantum
- we then schedule a flush() on the EventLoop to execute later, however it the flush0 optimization prematurely exits because the write flag is still set
In this scenario the socket is still writable so the EventLoop may never notify us that the socket is writable, and therefore we may never attempt to flush data to the OS.
Modifications:
- When the writeSpinCount quantum is exceeded we should clear the selector write flag
Result:
Fixes https://github.com/netty/netty/issues/7729
Motivation:
CharSequenceValueConverter#convertToBoolean has a few manual conditionals which can be removed if we use AsciiString.contentEqualsIgnoreCase. Also by comparing an AsciiString to a String we will incur conversions to char that can be avoided if we compare against AsciiString.
Modifications:
- Use AsciiString.contentEqualsIgnoreCase
- Compare against a AsciiString
Result:
Simplified CharSequenceValueConverter#convertToBoolean which favors AsciiString comparison.
Motivation:
It is not clear why Unsafe is unavailable when it is explicitly
disabled, or when Netty thinks it is running on Android.
Modification:
Change the "has" fields and methods to be causes. A null cause
means Unsafe is present. This catches all possible reason why
Unsafe might not be available.
Result:
Easier to debug Netty start up when logging cannot be turned on.
Motivation:
When SSL handshake fails, the connection should be closed. This is not true anymore after 978a46c.
Modifications:
- Ensure we always flush and close the channel on handshake failure.
- Add testcase.
Result:
Fixes [#7724].
Motivation:
To avoid eager allocation of the destination and to perform length prefixed encoding of UTF-8 string with forward only access pattern
Modifications:
The original writeUtf8 is modified by allowing customization of the reserved bytes on the destination buffer and is introduced an exact UTF-8 length estimator.
Result:
Is now possible to perform length first encoding with UTF-8 well-formed char sequences following a forward only write access pattern on the destination buffer.
Motivation:
We need to update jetty-alpn-agent to support java 1.8.0_162 while running our tests / examples.
Modifications:
Update jetty-alpn-agent to 2.0.7
Result:
All tests alpn related tests work again on latest java8 version
Motivation:
Profiling tcnative SSL code showed a non trivial percentage (1%)
of time spent in JNI code for InstaceOf. This turned out to be
from `Buffer.address` which makes a JNI call, which safely checks
on each call that The ByteBuffer is direct.
Modification:
Prefer using the address field of the pojo rather than looking it
up with JNI. This is the same approach taken by the `OpenSsl`
class.
Result:
Less JNI overhead
Motivation:
If you pass the output of CharSequenceValueConvert.convertToTimeMillis to convertTimeMillis it will throw a ParseException.
Modifications:
- Correctly implement CharSequenceValueConverter.convertTimeMillis
- Add unit-tests for CharSequenceValueConverter
Result:
Correctly convert timemillis.
Motivation:
HeaderEntry.equals() inherets Object.equals() which simply check if two objects are the same.
So it returns false even when two HeaderEntry objects have the same name and value.
Modifications:
Implement HeaderEntry.equals() that follows the specification of Map.Entry.equals().
https://docs.oracle.com/javase/9/docs/api/java/util/Map.Entry.html#equals-java.lang.Object-
Result:
HeaderEntry.equals() returns true if two HeaderEntry objects have the same name and value.
Motivation:
HttpHeaders.getBoolean should return the same truth value for the same string value, regardless of the underlying type.
Modifications:
- Only treat values of true as Boolean.TRUE
- Add unit tests.
Result:
Consistent converting of values for all CharSequence implementations.
Motivation:
Allow the observation of SETTINGS frame by other handlers in the pipeline. For my particular use case this allows me to observe the value of MAX_CONCURRENT_STREAMS for a ChannelPool abstraction that supports HTTP/2 multiplexing. Beside this also forward GOAWAY frames.
Modification:
Always forward SETTINGS and GOAWAY frames
Result:
Settings / Goaway can now be observed in the parent channel. Previously it was not possible (to my knowledge) to capture the settings when using Http2MultiplexCodec.
Motivation:
Headers.get* methods should not throw an exception but return null or the default value if converting of the value fails.
Modifications:
- Correctly handle the case when ValueConverter throws an Exception.
- Add testcase.
Result:
Fixes [#7710].
Motivation:
DefaultPromise's internal state depends upon specific Signal objects. These Signal objects can be used externally which causes the DefaultPromise object API to not function correct and state to become corrupted.
Modifications:
- DefaultPromise shouldn't depend upon Signal for its internal state
Result:
Fixes https://github.com/netty/netty/issues/7707
Motivation:
ByteBufUtil by default will cache DirectByteBuffer objects, and the
associated direct memory (up to 64k). In combination with the Recycler which may
cache up to 32k elements per thread may lead to a large amount of direct
memory being retained per EventLoop thread. As traffic spikes come this
may be perceived as a memory leak because the memory in the Recycler
will never be reclaimed.
Modifications:
- By default we shouldn't cache DirectByteBuffer objects.
Result:
Less direct memory consumption due to caching DirectByteBuffer objects.
Motivation:
NioDatagramChannel attempts to unpack a AddressedEnvelope and unconditionally uses internalNioBuffer. However if the ByteBuf is a CompositeByteBuf with more than 1 components, the write will fail and throw an exception.
Modifications:
- NioDatagramChannel should check the nioBufferCount before attempting
to use internalNioBuffer
Result:
No more failure to write UDP packets on NIO when a CompositeByteBuf is
used.
Motivation:
The code did reflection every method call which made the code slower and
harder to read with additional cases to consider.
Modifications:
Instead of loading the method and then throwing it away, save the Method
reference instead of the Class reference. Then also use more precise
exception handling for the method invocation.
Result:
Simpler, speedier code.
Motivation:
The Recycler currently retains 32k objects per thread by default. The Recycler is used in more than just one place and may result in large amounts of memory bloat if spikes of traffic are observed.
Modifications:
- Reduce the Recyclers default capacity from 32k to 4k.
Result:
- Lower default capacity of the Recycler and less memory retained.
Motivation:
Conscrypt is now 1.0. No more need to depend on release candidates.
Modifications:
Just the version bump. Things seemed compatible.
Result:
Depending on first guaranteed-api-stable release of Conscrypt.
Motivation:
Some java binaries include android classes on their classpath, even
if they aren't actually android. When this is true, `Unsafe` no
longer works, disabling the Epoll functionality. A sample case is
for binaries that use the j2objc library.
Modifications:
Check the `java.vm.name` instead of the classpath. Numerous
Google-internal Android libraries / binaries check this property
rather than the class path.
It is believed this is safe and works with bother ART and Dalvik
VMs, safe for Robolectric, and j2objc.
Results:
Unusually built java server binaries can still use Netty Epoll.
Motivation:
At the moment we use a ByteBuf as the payload for a http2 frame. This complicates life-time management a lot with no real gain and also may produce more objects then needed. We should just use a long as it is required to be 8 bytes anyway.
Modifications:
Use long for ping payloads.
Result:
Fixes [#7629].
Motivation:
Sometimes, it would be convenient to be able to easily enable all
supported cipher suites, regardless of security.
Currently, the only way it to retrieve all supported ciphers and pass
them explicitly.
Modification:
Introduce a new IdentityCipherSuiteFilter singleton that defaults to
supportedCiphers instead of defaultCiphers when ciphers are null.
Result:
Convenient way to enabled all supported cipher suites.
Motivation:
Currently if user call set/remove/set/remove many times, it will create multiple cleaner task for same index. It may cause OOM due to long live thread will have more and more task in LIVE_SET.
Modification:
Add flag to avoid recreating tasks.
Result:
Only create 1 clean task. But use more space of indexedVariables.
Since 3.1.1 mqtt protocol version SUBACK message can now indicate the failure in payload.
Modification:
Do not erase failure payload in for SUBACK message.
Result:
Fixes#7665
