Motivation:
Netty homepage(netty.io) serves both "http" and "https".
It's recommended to use https than http.
Modification:
I changed from "http://netty.io" to "https://netty.io"
Result:
No effects.
Motivation:
Http2MultiplexCodec and Http2MultiplexHandler had a very strong coupling with Http2FrameCodec which we can reduce easily. The end-goal should be to have no coupling at all.
Modifications:
- Reduce coupling by move some common logic to Http2CodecUtil
- Move logic to check if a stream may have existed before to Http2FrameCodec
- Use ArrayDeque as replacement for custom double-linked-list which makes the code a lot more readable
- Use WindowUpdateFrame to signal consume bytes (just as users do when they use Http2FrameCodec directly)
Result:
Less coupling and cleaner code.
Motivation:
In the past we had the following class hierarchy:
Http2ConnectionHandler --- Http2FrameCodec -- Http2MultiplexCodec
This hierarchy makes it impossible to plug in any code that would like to act on Http2Frame and Http2StreamFrame which can be quite useful for various situations (like metrics, logging etc). Beside this it also made the implementtion very hacky. To allow easier maintainance and also allow more flexible costumizations we should split Http2MultiplexCodec and Http2FrameCode.
Modifications:
- Introduce Http2MultiplexHandler (which is a replacement for Http2MultiplexCodec when used together with Http2FrameCodec)
- Mark Http2MultiplexCodecBuilder and Http2MultiplexCodec as deprecated. People should use Http2FrameCodecBuilder / Http2FrameCodec together with Http2MultiplexHandlder in the future
- Adjust / Add tests
- Adjust examples
Result:
More flexible usage possible and less hacky / coupled implementation for http2 multiplexing
Motivation:
f945a071db decoupled the writability state from the flow controller but could lead to the situation of a lot of writability updates events were propagated to the child channels. This change ensure we only take into account if the parent channel becomes writable again before we try to set the child channels to writable.
Modifications:
Only listen for channel writability changes for if the parent channel becomes writable again.
Result:
Less writability updates.
Motivation:
We should decouple the writability state of the http2 child channels from the flow-controller and just tie it to its own pending bytes counter that is decremented by the parent Channel once the bytes were written.
Modifications:
- Decouple writability state of child channels from flow-contoller
- Update tests
Result:
Less coupling and more correct behavior. Fixes https://github.com/netty/netty/issues/8148.
Motivation:
OOME is occurred by increasing suppressedExceptions because other libraries call Throwable#addSuppressed. As we have no control over what other libraries do we need to ensure this can not lead to OOME.
Modifications:
Only use static instances of the Exceptions if we can either dissable addSuppressed or we run on java6.
Result:
Not possible to OOME because of addSuppressed. Fixes https://github.com/netty/netty/issues/9151.
Motivation:
Http2MultiplexCodec.DefaultHttp2StreamChannel currently only act on ClosedChannelException exceptions when checking for isAutoClose(). We should widen the scope here to IOException to be more consistent with AbstractChannel.
Modifications:
Replace instanceof ClosedChannelException with instanceof IOException
Result:
More consistent handling of isAutoClose()
Motivation:
Http2ConnectionHandler#close(..) always runs the GOAWAY and graceful close
logic. This coupling means that a user would have to override
Http2ConnectionHandler#close(..) to modify the behavior, and the
Http2FrameCodec and Http2MultiplexCodec are not extendable so you cannot
override at this layer. Ideally we can totally decouple the close(..) of the
transport and the GOAWAY graceful closure process completely, but to preserve
backwards compatibility we can add an opt-out option to decouple where the
application is responsible for sending a GOAWAY with error code equal to
NO_ERROR as described in https://tools.ietf.org/html/rfc7540#section-6.8 in
order to initiate graceful close.
Modifications:
- Http2ConnectionHandler supports an additional boolean constructor argument to
opt out of close(..) going through the graceful close path.
- Http2FrameCodecBuilder and Http2MultiplexCodec expose
gracefulShutdownTimeoutMillis but do not hook them up properly. Since these
are already exposed we should hook them up and make sure the timeout is applied
properly.
- Http2ConnectionHandler's goAway(..) method from Http2LifecycleManager should
initiate the graceful closure process after writing a GOAWAY frame if the error
code is NO_ERROR. This means that writing a Http2GoAwayFrame from
Http2FrameCodec will initiate graceful close.
Result:
Http2ConnectionHandler#close(..) can now be decoupled from the graceful close
process, and immediately close the underlying transport if desired.
Motivation:
The HTTP/2 codec will synchronously respond to a SETTINGS frame with a SETTINGS
ACK before the application sees the SETTINGS frame. The application may need to
adjust its state depending upon what is in the SETTINGS frame before applying
the remote settings and responding with an ACK (e.g. to adjust for max
concurrent streams). In order to accomplish this the HTTP/2 codec should allow
for the application to opt-in to sending the SETTINGS ACK.
Modifications:
- DefaultHttp2ConnectionDecoder should support a mode where SETTINGS frames can
be queued instead of immediately applying and ACKing.
- DefaultHttp2ConnectionEncoder should attempt to poll from the queue (if it
exists) to apply the earliest received but not yet ACKed SETTINGS frame.
- AbstractHttp2ConnectionHandlerBuilder (and sub classes) should support a new
option to enable the application to opt-in to managing SETTINGS ACK.
Result:
HTTP/2 allows for asynchronous SETTINGS ACK managed by the application.
Motivation:
We can use lambdas now as we use Java8.
Modification:
use lambda function for all package, #8751 only migrate transport package.
Result:
Code cleanup.
Motivation:
We can use the diamond operator these days.
Modification:
Use diamond operator whenever possible.
Result:
More modern code and less boiler-plate.
Motivation:
At the moment it’s possible to have a Channel in Netty that is not registered / assigned to an EventLoop until register(...) is called. This is suboptimal as if the Channel is not registered it is also not possible to do anything useful with a ChannelFuture that belongs to the Channel. We should think about if we should have the EventLoop as a constructor argument of a Channel and have the register / deregister method only have the effect of add a Channel to KQueue/Epoll/... It is also currently possible to deregister a Channel from one EventLoop and register it with another EventLoop. This operation defeats the threading model assumptions that are wide spread in Netty, and requires careful user level coordination to pull off without any concurrency issues. It is not a commonly used feature in practice, may be better handled by other means (e.g. client side load balancing), and therefore we propose removing this feature.
Modifications:
- Change all Channel implementations to require an EventLoop for construction ( + an EventLoopGroup for all ServerChannel implementations)
- Remove all register(...) methods from EventLoopGroup
- Add ChannelOutboundInvoker.register(...) which now basically means we want to register on the EventLoop for IO.
- Change ChannelUnsafe.register(...) to not take an EventLoop as parameter (as the EventLoop is supplied on custruction).
- Change ChannelFactory to take an EventLoop to create new Channels and introduce ServerChannelFactory which takes an EventLoop and one EventLoopGroup to create new ServerChannel instances.
- Add ServerChannel.childEventLoopGroup()
- Ensure all operations on the accepted Channel is done in the EventLoop of the Channel in ServerBootstrap
- Change unit tests for new behaviour
Result:
A Channel always has an EventLoop assigned which will never change during its life-time. This ensures we are always be able to call any operation on the Channel once constructed (unit the EventLoop is shutdown). This also simplifies the logic in DefaultChannelPipeline a lot as we can always call handlerAdded / handlerRemoved directly without the need to wait for register() to happen.
Also note that its still possible to deregister a Channel and register it again. It's just not possible anymore to move from one EventLoop to another (which was not really safe anyway).
Fixes https://github.com/netty/netty/issues/8513.
* Handling AUTO_READ should not be the responsibility of DefaultChannelPipeline but the Channel itself.
Motivation:
At the moment we do automatically call read() in the DefaultChannelPipeline when fireChannelReadComplete() / fireChannelActive() is called and the Channel is using auto read. This is nice in terms of sharing code but imho is not the responsibility of the ChannelPipeline implementation but the responsibility of the Channel implementation.
Modifications:
Move handing of auto read from DefaultChannelPipeline to Channel implementations.
Result:
More clear responsibiliy and not depending on implemention details of the ChannelPipeline.
Motiviation:
Http2FrameCodecTest and Http2MultiplexCodecTest were quite fragile and often not went through the whole pipeline which made testing sometimes hard and error-prone.
Modification:
- Refactor tests to have data flow through the whole pipeline and so made the test more robust (by testing the while implementation).
Result:
Easier to write tests for the codecs in the future and more robust testing in general.
Beside this it also fixes https://github.com/netty/netty/issues/6036.
Motivation:
9f9aa1a did some changes related to fixing how we handle ctx.read() in child channel but did incorrectly change some assert.
Modifications:
Fix assert to be correct.
Result:
Code does not throw an AssertionError due incorrect assert check.
Motivation:
We did not correct respect ctx.read() calls while processing a read for a child Channel. This could lead to read stales when auto read is disabled and no other read was requested.
Modifications:
- Keep track of extra read() calls while processing reads
- Add unit tests that verify that read() is respected when triggered either in channelRead(...) or channelReadComplete(...)
Result:
Fixes https://github.com/netty/netty/issues/8209.
Motivation:
Http2MultiplexCodec queues data internally if data is delivered from the
parent channel but the child channel did not request data. If the parent
channel notifies of a stream closure it is possible data in the queue
will be discarded before closing the channel.
Http2MultiplexCodec interacts with RecvByteBufAllocator to control the
child channel's demand for read. However it currently only ever reads a
maximum of one time per loop. This can thrash the read loop and bloat
the call stack if auto read is on, because channelReadComplete will
re-enter the read loop synchronously, and also neglect to deliver data
during the parent's read loop (if it is active). This also meant the
readPendingQueue was not utilized as originally intended (to extend the
child channel's read loop during the parent channel's read loop if
demand for data still existed).
Modifications:
- Modify the child channel's read loop to respect the
RecvByteBufAllocator, and append to the parents readPendingQueue if
appropriate.
- Stream closure notification behaves like EPOLL and KQUEUE transports
and reads all queued data, because the data is already queued in memory
and it is known there will be no more data. This will also replenish the
connection flow control window which may otherwise be constrained by a
closed stream.
Result:
More correct read loop and less risk of dropping data.
Motivation:
When a Http2MultiplexCodec stream channel fails to write the first
HEADERS it will forcibly close, and that will trigger sending a
RST_STREAM, which is commonly a connection level protocol error. This is
because it has what looks like a valid stream id, but didn't check with
the connection as to whether the stream may have actually existed.
Modifications:
Instead of checking if the stream was just a valid looking id ( > 0) we
check with the connection as to whether it may have existed at all.
Result:
We no longer send a RST_STREAM frame from Http2MultiplexCodec for idle
streams.
Motivation:
If a write fails for a Http2MultiplexChannel stream channel, the channel
may be forcibly closed, but only after the promise has been failed. That
means continuations attached to the promise may see the channel in an
inconsistent state of still being open and active.
Modifications:
Move the satisfaction of the promise to after the channel cleanup logic
runs.
Result:
Listeners attached to the future that resulted in a Failed write will
see the stream channel in the correct state.
Motivation:
We deviate from the AbstractChannel implementation on deregistration by
failing the provided promise if the channel is already deregistered. In
contrast, AbstractChannel will always set the promise to successfully
done.
Modification:
Change the
Http2MultiplexCodec.DefaultHttp2StreamChannel.Http2ChannelUnsafe to
always set the promise provided to deregister as done as is the
case in AbstractChannel.
Motivation:
There is an inconsistency between the order of events in the
StreamChannel implementation in Http2MultiplexCodec and other Channel
implementations that extend AbstractChannel where channelInactive and
channelUnregistered events are not performed 'later'. This can cause an
unexected order of events for ChannelHandler implementations that call
Channel.close() in response to some event.
Modification:
The Http2MultiplexCodec.DefaultHttp2StreamChannel.Http2ChannelUnsafe was
modified to bounce the deregistration and channelInactive events through
the parent channels EventLoop.
Result:
Stream events are now in the proper order.
Fixes#8018.
Motivation:
Http2MultiplexCodec doesn't currently have an API for using the response
of a h2c upgrade request.
Modifications:
Add a new API to the Http2MultiplexCodecBuilder which allows for setting
an upgrade handler and wire it into the Http2MultiplexCodec
implementation.
Result:
When using the Http2MultiplexCodec with h2c upgrades the upgrade handler
will get added to the Http2StreamChannel which represents the
half-closed (local) response of stream 1. It is then up to the user to
manage the transition from the IO channel pipeline configuration
necessary for making the h2c upgrade request to a form where it can read
the response from the new stream channel.
Fixes#7947.
Motivation:
We incorrectly called frame.release() in onHttp2GoAwayFrame which could lead to IllegalReferenceCountExceptions. The call of release() is inappropriate because the fireChannelRead() in onHttp2Frame() will handle it.
Modifications:
- Not call frame.release()
- Add a unit test
Result:
Fxies https://github.com/netty/netty/issues/7892.
Motivation:
Allow the observation of SETTINGS frame by other handlers in the pipeline. For my particular use case this allows me to observe the value of MAX_CONCURRENT_STREAMS for a ChannelPool abstraction that supports HTTP/2 multiplexing. Beside this also forward GOAWAY frames.
Modification:
Always forward SETTINGS and GOAWAY frames
Result:
Settings / Goaway can now be observed in the parent channel. Previously it was not possible (to my knowledge) to capture the settings when using Http2MultiplexCodec.
Motivation:
We should convert Http2Exceptions that are produced because of STREAM_CLOSED to ClosedChannelException when hand-over to the child channel to make it more consistent with other transports.
Modifications:
- Check if STREAM_CLOSED is used and if so create a new ClosedChannelException (while preserve the original exception as cause) and use it in the child channel
- Ensure STREAM_CLOSED is used in DefaultHttp2RemoteFlowController when writes are failed because of a closed stream.
- Add testcase
Result:
More consistent and correct exception usage.
Motivation:
Calling DefaultHttp2StreamChannel.Unsafe.close(...) multiple times should not fail.
Modification:
- Correctly handle multiple calls to DefaultHttp2StreamChannel.Unsafe.close(...)
- Complete closePromise and promise that is given to close(...) in the correct order.
- Add unit test
Result:
Fixes [#7628] and [#7641]
Motivation:
When part of a HTTP/2 StreamChannel the Http2StreamChannel.isOpen() / isActive() should report false within a call to a ChannelInboundHandlers channelInactive() method.
Modifications:
Fullfill promise before call fireChannelInactive()
Result:
Correctly update state / promise before notify handlers. Fixes [#7638]
Motivation:
Http2MultiplexCodec swallows Http2PingFrames without releasing the payload, resulting in a memory leak.
Modification:
Send unhandled frames down the pipeline for consumption/disposal by another InboundChannelHandler.
Result:
Fixes#7607.
Motivation:
If a child channel's read is triggered outside the parent channel's read
loop then it is possible a WINDOW_UPDATE will be written, but not
flushed.
If a child channel's beginRead processes data from the inboundBuffer and
then readPending is set to false, which will result in data not being
delivered if in the parent's read loop and more data is attempted to be
delievered to that child channel.
Modifications:
- The child channel must force a flush if a frame is written as a result
of reading a frame, and this is not in the parent channel's read loop
- The child channel must allow a transition from dequeueing from
beginRead into the parent channel's read loop to deliver more data
Result:
The child channel flushes data when reading outside the parent's read
loop, and has frames delivered more reliably.
Motivation:
We missed to mark the Http2StreamChannel as writable in some cases which could lead to the situation that a Channel never becomes writable. Also when a Http2StreamChannel was created we always marked it non-writable at the beginning which means if the user will only start writing once the Channel becomes writable it will never happen as it only became writable after the first header was written.
Modifications:
- Correctly handle updates for writability in all cases
- Change unit tests to cover this.
Result:
Fixes [#7179].
Motivation:
We must not add the inboundStreamHandler for outbound streams creates by Http2MultiplexCodec as the user will specify a handler via Http2StreamChannelBootstrap.
Modifications:
- Check if the stream is for outbound and if so not add the inboundStreamHandler to the pipeline
- Update tests so this is covered.
Result:
Fixes [#7178]
Motivation:
We should call promise.setUncancellable() in DefaultHttp2StreamChannel.Unsafe impl to detect if the operation was cancelled.
Modifications:
Add promise.setUncancellable() calls
Result:
More correct handling of cancelled promises
Motivation:
Our http2 child channel implementation was not 100 % complete and had a few bugs. Beside this the performance overhead was non-trivial.
Modifications:
There are a lot of modifications, the most important....
* Http2FrameCodec extends Http2ConnectionHandler and Http2MultiplexCodec extends Http2FrameCodec to reduce performance heads and inter-dependencies on handlers in the pipeline
* Correctly handle outbound flow control for child channels
* Support unknow frame types in Http2FrameCodec and Http2MultiplexCodec
* Use a consistent way how to create Http2ConnectionHandler, Http2FrameCodec and Http2MultiplexCodec (via a builder)
* Remove Http2Codec and Http2CodecBuilder as the user should just use Http2MultipleCodec and Http2MultiplexCodecBuilder now
* Smart handling of flushes from child channels to reduce overhead
* Reduce object allocations
* child channels always use the same EventLoop as the parent Channel to reduce overhead and simplify implementation.
* Not extend AbstractChannel for the child channel implementation to reduce overhead in terms of performance and memory usage
* Remove Http2FrameStream.managedState(...) as the user of the child channel api should just use Channel.attr(...)
Result:
Http2MultiplexCodec (and so child channels) and Http2FrameCodec are more correct, faster and more feature complete.
Motivation:
This PR (unfortunately) does 4 things:
1) Add outbound flow control to the Http2MultiplexCodec:
The HTTP/2 child channel API should interact with HTTP/2 outbound/remote flow control. That is,
if a H2 stream used up all its flow control window, the corresponding child channel should be
marked unwritable and a writability-changed event should be fired. Similarly, a unwritable
child channel should be marked writable and a writability-event should be fired, once a
WINDOW_UPDATE frame has been received. The changes are (mostly) contained in ChannelOutboundBuffer,
AbstractHttp2StreamChannel and Http2MultiplexCodec.
2) Introduce a Http2Stream2 object, that is used instead of stream identifiers on stream frames. A
Http2Stream2 object allows an application to attach state to it, and so a application handler
no longer needs to maintain stream state (i.e. in a map(id -> state)) himself.
3) Remove stream state events, which are no longer necessary due to the introduction of Http2Stream2.
Also those stream state events have been found hard and complex to work with, when porting gRPC
to the Http2FrameCodec.
4) Add support for HTTP/2 frames that have not yet been implemented, like PING and SETTINGS. Also add
a Http2FrameCodecBuilder that exposes options from the Http2ConnectionHandler API that couldn't else
be used with the frame codec, like buffering outbound streams, window update ratio, frame logger, etc.
Modifications:
1) A child channel's writability and a H2 stream's outbound flow control window interact, as described
in the motivation. A channel handler is free to ignore the channel's writability, in which case the
parent channel is reponsible for buffering writes until a WINDOW_UPDATE is received.
The connection-level flow control window is ignored for now. That is, a child channel's writability
is only affected by the stream-level flow control window. So a child channel could be marked writable,
even though the connection-level flow control window is zero.
2) Modify Http2StreamFrame and the Http2FrameCodec to take a Http2Stream2 object intstead of a primitive
integer. Introduce a special Http2ChannelDuplexHandler that has newStream() and forEachActiveStream()
methods. It's recommended for a user to extend from this handler, to use those advanced features.
3) As explained in the documentation, a new inbound stream active can be detected by checking if the
Http2Stream2.managedState() of a Http2HeadersFrame is null. An outbound stream active can be detected
by adding a listener to the ChannelPromise of the write of the first Http2HeadersFrame. A stream
closed event can be listened to by adding a listener to the Http2Stream2.closeFuture().
4) Add a simple Http2FrameCodecBuilder and implement the missing frame types.
Result:
1) The Http2MultiplexCodec supports outbound flow control.
2) The Http2FrameCodec API makes it easy for a user to manage custom stream specific state and to create
new outbound streams.
3) The Http2FrameCodec API is much cleaner and easier to work with. Hacks like the ChannelCarryingHeadersFrame
are no longer necessary.
4) The Http2FrameCodec now also supports PING and SETTINGS frames. The Http2FrameCodecBuilder allows the Http2FrameCodec
to use some of the rich features of the Http2ConnectionHandler API.
Motivation
Http2StreamChannel ignores options of its parent channel when being created. That leads to surprising results when, for example, unpooled allocator could be silently replaced with pooled allocator (default setting).
Modification
Copy parent channel's options over to the Http2StreamChannel.
Result
Channel options are now consistent between Http2StreamChannel and its parent channel. Newly added test passes on this branch and fails on master. Fixes#6551.
Motivation:
The HTTP/2 child channel API does not allow to create local/outbound HTTP/2 streams.
Modifications:
Add a Http2StreamChannelBootstrap that allows to create outbound streams.
Result:
The HTTP/2 child channel API now supports outbound streams.
Motivation:
Quote from issue 4914:
"Http2MultiplexCodec currently does two things: mapping the existing h2 API to frames and managing the child channels.
It would be better if the two parts were separated. This would allow less-coupled development of the HTTP/2 handlers (flow control could be its own handler, for instance) and allow applications to insert themselves between all streams and the codec, which permits custom logic and could be used, in part, to implement custom frame types.
It would also greatly ease testing, as the child channel could be tested by itself without dealing with how frames are encoded on the wire."
Modifications:
- Split the Http2MultiplexCodec into Http2FrameCodec and Http2MultiplexCodec. The Http2FrameCodec interacts with the existing HTTP/2 callback-based API, while the Http2MulitplexCodec is completely independent of it and simply multiplexes Http2StreamFrames to the child channels. Additionally, the Http2Codec handler is introduced, which is a convenience class that simply sets up the Http2FrameCodec and Http2MultiplexCodec in the channel pipeline and removes itself.
- Improved test coverage quite a bit.
Result:
- The original Http2MultiplexCodec is split into Http2FrameCodec and Http2MultiplexCodec.
- More tests for higher confidence in the code.
Motivation:
JCTools supports both non-unsafe, unsafe versions of queues and JDK6 which allows us to shade the library in netty-common allowing it to stay "zero dependency".
Modifications:
- Remove copy paste JCTools code and shade the library (dependencies that are shaded should be removed from the <dependencies> section of the generated POM).
- Remove usage of OneTimeTask and remove it all together.
Result:
Less code to maintain and easier to update JCTools and less GC pressure as the queue implementation nt creates so much garbage
Related: #4333#4421#5128
Motivation:
slice(), duplicate() and readSlice() currently create a non-recyclable
derived buffer instance. Under heavy load, an application that creates a
lot of derived buffers can put the garbage collector under pressure.
Modifications:
- Add the following methods which creates a non-recyclable derived buffer
- retainedSlice()
- retainedDuplicate()
- readRetainedSlice()
- Add the new recyclable derived buffer implementations, which has its
own reference count value
- Add ByteBufHolder.retainedDuplicate()
- Add ByteBufHolder.replace(ByteBuf) so that..
- a user can replace the content of the holder in a consistent way
- copy/duplicate/retainedDuplicate() can delegate the holder
construction to replace(ByteBuf)
- Use retainedDuplicate() and retainedSlice() wherever possible
- Miscellaneous:
- Rename DuplicateByteBufTest to DuplicatedByteBufTest (missing 'D')
- Make ReplayingDecoderByteBuf.reject() return an exception instead of
throwing it so that its callers don't need to add dummy return
statement
Result:
Derived buffers are now recycled when created via retainedSlice() and
retainedDuplicate() and derived from a pooled buffer
Motivation:
We tried to provide the ability for the user to change the semantics of the threading-model by delegate the invoking of the ChannelHandler to the ChannelHandlerInvoker. Unfortunually this not really worked out quite well and resulted in just more complexity and splitting of code that belongs together. We should remove the ChannelHandlerInvoker again and just do the same as in 4.0
Modifications:
Remove ChannelHandlerInvoker again and replace its usage in Http2MultiplexCodec
Result:
Easier code and less bad abstractions.
Motivation:
Some codecs should be considered unstable as these are relative new. For this purpose we should introduce an annotation which these codecs should us to be marked as unstable in terms of API.
Modifications:
- Add UnstableApi annotation and use it on codecs that are not stable
- Move http2.hpack to http2.internal.hpack as it is internal.
Result:
Better document unstable APIs.
Motivation:
This allows using handlers for Streams in normal Netty-style. Frames are
read/written to the channel as messages, not directly as a
callback/method call. Handlers allow mixing and can ease HTTP/1 and
HTTP/2 interoperability by eventually supporting HTTP/1 handlers in
HTTP/2 and vise versa.
Modifications:
New handler Http2MultiplexCodec that converts from the current HTTP/2
API to a message-based API and child channels for streams.
Result:
The basics are done for server-side: new streams trigger creation of new
channels in much the same appearance to how new connections trigger new
channel creation. The basic frames HEADERS and DATA are handled, but
also GOAWAY and RST_STREAM.
Inbound flow control is implemented, but outbound is not. That will be
done later, along with not completing write promises on the child
channel until the write actually completes on the parent.
There is not yet support for outbound priority/weight, push promises,
and many other features.
There is a generic Object that may be set on stream frames. This also
paves the way for client-side support which needs a way to refer to
yet-to-be-created streams (due to how HEADERS allocates a stream id, and
the allocation order must be the same as transmission order).
jingene
Norman Maurer
Scott Mitchell
田欧
Scott Mitchell
Bryce Anderson
shorea
Norman Maurer
buchgr
Vladimir Kostyukov
Christopher Exell
Guido Medina
Trustin Lee
Eric Anderson