Motivation:
In Netty, currently, the HttpPostRequestEncoder only supports POST, PUT, PATCH and OPTIONS, while the RFC 7231 allows with a warning that GET, HEAD, DELETE and CONNECT use a body too (but not TRACE where it is explicitely not allowed).
The RFC in chapter 4.3 says:
"A payload within a XXX request message has no defined semantics;
sending a payload body on a XXX request might cause some existing
implementations to reject the request."
where XXX can be replaced by one of GET, HEAD, DELETE or CONNECT.
Current usages, on particular in REST mode, tend to use those extra HttpMethods for such queries.
So this PR proposes to remove the current restrictions, leaving only TRACE as explicitely not supported.
Modification:
In the constructor, where the test is done, replacing all by checking only against TRACE, and adding one test to check that all methods are supported or not.
Result:
Fixes#6138.
Motivation:
cb139043f3 introduced special handling of response to HEAD requests. Due a bug we failed to handle FullHttpResponse correctly.
Modifications:
Correctly handle FullHttpResponse for HEAD requests.
Result:
Works as expected.
Motivation:
We should have a unit test which explicitly tests a HTTP message being split between multiple ByteBuf objects.
Modifications:
- Add a unit test to HttpRequestDecoderTest which splits a request between 2 ByteBuf objects
Result:
More unit test coverage for HttpObjectDecoder.
Motivation:
Enables optional .startsWith() matching of req.uri() with websocketPath.
Modifications:
New checkStartsWith boolean option with default false value added to both WebSocketServerProtocolHandler and WebSocketServerProtocolHandshakeHandler. req.uri() matching is based on this option.
Result:
By default old behavior matching via .equal() is preserved. To use checkStartsWith use constructor shortcut: new WebSocketServerProtocolHandler(websocketPath, true) or fill this flag on full form of constructor among other options.
request with a 'content-encoding: chunked' header
Motivation:
It is valid to send a response to a HEAD request that contains a transfer-encoding: chunked header, but it is not valid to include a body, and there is no way to do this using the netty4 HttpServerCodec.
The root cause is that the netty4 HttpObjectEncoder will transition to the state ST_CONTENT_CHUNK and the only way to transition back to ST_INIT is through the encodeChunkedContent method which will write the terminating length (0\r\n\r\n\r\n), a protocol error when responding to a HEAD request
Modifications:
- Keep track of the method of the request and depending on it handle the response differently when encoding it.
- Added a unit test.
Result:
Correclty handle HEAD responses that are chunked.
Motivation:
According to https://www.ietf.org/rfc/rfc2388.txt 4.4, filename after "content-disposition" is optional and arbitrary (does not need to match a real filename).
Modifications:
This change supports an extra addBodyFileUpload overload to precise the filename (default to File.getName). If empty or null this argument should be ignored during encoding.
Result:
- A backward-compatible addBodyFileUpload(String, File, String, boolean) to use file.getName() as filename.
- A new addBodyFileUpload(String, String, File, String, boolean) overload to precise filename
- Couple of tests for the empty use case
Motivation:
IntelliJ issues several warnings.
Modifications:
* `ClientCookieDecoder` and `ServerCookieDecoder`:
* `nameEnd`, `valueBegin` and `valueEnd` don't need to be initialized
* `keyValLoop` loop doesn't been to be labelled, as it's the most inner one (same thing for labelled breaks)
* Remove `if (i != headerLen)` as condition is always true
* `ClientCookieEncoder` javadoc still mention old logic
* `DefaultCookie`, `ServerCookieEncoder` and `DefaultHttpHeaders` use ternary ops that can be turned into simple boolean ones
* `DefaultHeaders` uses a for(int) loop over an array. It can be turned into a foreach one as javac doesn't allocate an iterator to iterate over arrays
* `DefaultHttp2Headers` and `AbstractByteBuf` `equal` can be turned into a single boolean statement
Result:
Cleaner code
Motivation:
* DefaultHeaders from netty-codec has some duplicated logic for header date parsing
* Several classes keep on using deprecated HttpHeaderDateFormat
Modifications:
* Move HttpHeaderDateFormatter to netty-codec and rename it into HeaderDateFormatter
* Make DefaultHeaders use HeaderDateFormatter
* Replace HttpHeaderDateFormat usage with HeaderDateFormatter
Result:
Faster and more consistent code
Motivation:
code assumes a numeric value of 0 means no digits were read between separators, which fails for timestamps like 00:00:00.
also code accepts invalid timestamps like 0:0:000
Modifications:
explicitly check for number of digits between separators instead of relying on the numeric value.
also add tests.
Result:
timestamps with 00 successfully parse, timestamps with 000 no longer
Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
Motivation:
The method HttpUtil.getCharsetAsString(...) is missleading as its return type is CharSequence and not String.
Modifications:
Deprecate HttpUtil.getCharsetAsString(...) and introduce HttpUtil.getCharsetAsSe
quence(...).
Result:
Less confusing method name.
Motivation:
* RFC6265 defines its own parser which is different from RFC1123 (it accepts RFC1123 format but also other ones). Basically, it's very lax on delimiters, ignores day of week and timezone. Currently, ClientCookieDecoder uses HttpHeaderDateFormat underneath, and can't parse valid cookies such as Github ones whose expires attribute looks like "Sun, 27 Nov 2016 19:37:15 -0000"
* ServerSideCookieEncoder currently uses HttpHeaderDateFormat underneath for formatting expires field, and it's slow.
Modifications:
* Introduce HttpHeaderDateFormatter that correctly implement RFC6265
* Use HttpHeaderDateFormatter in ClientCookieDecoder and ServerCookieEncoder
* Deprecate HttpHeaderDateFormat
Result:
* Proper RFC6265 dates support
* Faster ServerCookieEncoder and ClientCookieDecoder
* Faster tool for handling headers such as "Expires" and "Date"
Motiviation:
We used ReferenceCountUtil.releaseLater(...) in our tests which simplifies a bit the releasing of ReferenceCounted objects. The problem with this is that while it simplifies stuff it increase memory usage a lot as memory may not be freed up in a timely manner.
Modifications:
- Deprecate releaseLater(...)
- Remove usage of releaseLater(...) in tests.
Result:
Less memory needed to build netty while running the tests.
Motivation:
If the wsURL contains an encoded query, it will be decoded when generating the raw path. For example if the wsURL is http://test.org/path?a=1%3A5, the returned raw path would be /path?a=1:5
Modifications:
Use wsURL.getRawQuery() rather than wsURL.getQuery()
Result:
rawPath will now return /path?a=1%3A5
Motivation:
Some commons values are missing from HttpHeader values constants.
Modifications:
- Add constants for "application/json" Content-Type
- Add constants for "gzip,deflate" Content-Encoding
Result:
More HttpHeader values constants available, both in
`HttpHeaders.Values` and `HttpHeaderValues`.
Motivation:
The HttpObjectAggregator never appends a 'Connection: close' header to
the response of oversized messages even though in the majority of cases
its going to close the connection.
Modification:
This PR addresses that by ensuring the requisite header is present when
the connection is going to be closed.
Result:
Gracefully signal that we are about to close the connection.
Motivation:
We need to ensure we not add the Transfer-Encoding header if the HttpMessage is EOF terminated.
Modifications:
Only add the Transfer-Encoding header if an Content-Length header is present.
Result:
Correctly handle HttpMessage that is EOF terminated.
Motivation:
We want to reject the upgrade as quickly as possible, so that we can
support streamed responses.
Modifications:
Reject the upgrade as soon as we inspect the headers if they're wrong,
instead of waiting for the entire response body.
Result:
If a remote server doesn't know how to use the http upgrade and tries to
responsd with a streaming response that never ends, the client doesn't
buffer forever, but can instead pass it along. Fixes#5954
Motivation:
the build doesnt seem to enforce this, so they piled up
Modifications:
removed unused import lines
Result:
less unused imports
Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
Motivation:
The Javadocs of HttpUtil.getContentLength(HttpMessage, long) and its int overload state that the provided default value is returned if the Content-Length value is not a number. NumberFormatException is thrown instead.
Modifications:
Correctly handle when the value is not a number.
Result:
API works as stated in javadocs.
Motivation:
HttpObjectDecoder maintains a resetRequested flag which is used to determine if internal state should be reset when a decode occurs. However after a reset is done the resetRequested flag is not set to false. This leads to all data after this point being discarded.
Modifications:
- Set resetRequested to false when a reset is done
Result:
HttpObjectDecoder can still function after a reset.
Motivation:
As discussed in #5738, developers need to concern themselves with setting
connection: keep-alive on the response as well as whether to close a
connection or not after writing a response. This leads to special keep-alive
handling logic in many different places. The purpose of the HttpServerKeepAliveHandler
is to allow developers to add this handler to their pipeline and therefore
free themselves of having to worry about the details of how Keep-Alive works.
Modifications:
Added HttpServerKeepAliveHandler to the io.netty.handler.codec.http package.
Result:
Developers can start using HttpServerKeepAliveHandler in their pipeline instead
of worrying about when to close a connection for keep-alive.
Motivation:
As described in #5734
Before this change, if the server had to do some sort of setup after a
handshake was completed based on handshake's information, the only way
available was to wait (in a separate thread) for the handshaker to be
added as an attribute to the channel. Too much hassle.
Modifications:
Handshake completed event need to be stateful now, so I've added a tiny
class holding just the HTTP upgrade request and the selected subprotocol
which is fired as an event after the handshake has finished.
I've also deprecated the old enum used as stateless event and I left the
code that fires it for backward compatibility. It should be removed in
the next mayor release.
Result:
It should be much simpler now to do initialization stuff based on
subprotocol or request headers on handshake completion. No asynchronous
waiting needed anymore.
Motivation:
The CorsHandler currently closes the channel when it responds to a preflight (OPTIONS)
request or in the event of a short circuit due to failed validation.
Especially in an environment where there's a proxy in front of the service this causes
unnecessary connection churn.
Modifications:
CorsHandler now uses HttpUtil to determine if the connection should be closed
after responding and to set the Connection header on the response.
Result:
Channel will stay open when the CorsHandler responds unless the client specifies otherwise
or the protocol version is HTTP/1.0
Motivation:
Documentation was added in #2401 to aid developers in understanding
how HttpObjectAggregator works and that it needs an encoder before it.
In #2471 it was pointed out that the documentation added can actually
add to the confusion and that it might have a typo.
This is an attempt at clearing up that confusion. Feedback is welcome.
Modifications:
- Adjust class level javadoc for HttpObjectAggregator
* Remove reference to HttpRequestEncoder
* Point out when HttpResponseEncoder is needed
* Point out that either HttpRequestDecoder or HttpResponseDecoder is needed
* Make clear everything must be added before HttpObjectAggregator
* Mention HttpServerCodec
Result:
Avoid confusion about dependencies for HttpObjectAggregator on the pipeline.
Motivation:
The CorsHandler currently closes the channel when it responds to a preflight (OPTIONS)
request or in the event of a short circuit due to failed validation.
Especially in an environment where there's a proxy in front of the service this causes
unnecessary connection churn.
Modifications:
CorsHandler now uses HttpUtil to determine if the connection should be closed
after responding
Result:
Channel will stay open when the CorsHandler responds unless the client specifies otherwise
or the protocol version is HTTP/1.0
Motivation:
RFC 6265 does not state that cookie names must be case insensitive.
Modifications:
Fix io.netty.handler.codec.http.cookie.DefaultCookie#equals() method to
use case sensitive String#equals() and String#compareTo().
Result:
It is possible to parse several cookies with same names but with
different cases.
Motivation:
The CorsHandler currently returns the Access-Control-Allow-Headers
header as on a Non-Preflight CORS request (Simple request).
As per the CORS specification the Access-Control-Allow-Headers header
should only be returned on Preflight requests. (not on simple requests).
https://www.w3.org/TR/2014/REC-cors-20140116/#access-control-allow-headers-response-headerhttp://www.html5rocks.com/static/images/cors_server_flowchart.png
Modifications:
Modified CorsHandler.java to not add the Access-Control-Allow-Headers
header when responding to Non-preflight CORS request.
Result:
Access-Control-Allow-Headers header will not be returned on a Simple
request (Non-preflight CORS request).
Motivation:
There are few duplicated byte[] CRLF fields in code.
Modifications:
Removed duplicated fields as they could be inherited from parent encoder.
Result:
Less static fields.
Motivation :
Unboxing operations allocate unnecessary objects when it could be avoided.
Modifications:
Replaced Float.valueOf with Number.parseFloat where possible.
Result:
Less unnecessary objects allocations.
Motivation:
retainSlice() currently does not unwrap the ByteBuf when creating the ByteBuf wrapper. This effectivley forms a linked list of ByteBuf when it is only necessary to maintain a reference to the unwrapped ByteBuf.
Modifications:
- retainSlice() and retainDuplicate() variants should only maintain a reference to the unwrapped ByteBuf
- create new unit tests which generally verify the retainSlice() behavior
- Remove unecessary generic arguments from AbstractPooledDerivedByteBuf
- Remove unecessary int length member variable from the unpooled sliced ByteBuf implementation
- Rename the unpooled sliced/derived ByteBuf to include Unpooled in their name to be more consistent with the Pooled variants
Result:
Fixes https://github.com/netty/netty/issues/5582
Motivation:
Currently, QueryStringDecoder#path simply returns the path info as is, without decoding it as the Javadoc states.
Modifications:
* Make QueryStringDecoder#path decode the path info.
* Add tests to QueryStringDecoderTest.
Result:
QueryStringDecoder#path now decodes the path info as expected.
Motivation:
DiskFileUpload and MemoryFileUpload.equals(...) are broken.
Modifications:
Fix implementation and add unit test.
Result:
Equals method are correct now.
Motivation:
We don't have an argument named {@code value} but have {@code set} and
{@code expected} in HttpHeaders and HttpUtil respectively.
Modifications:
I replaced {@code value} to {@code set} and {@code expected} in HttpHeaders
and HttpUtil respectively.
Result:
Now javadoc says;
If {@code set} is {@code true}, the {@code "Expect: 100-continue"} header is
set and all other previous {@code "Expect"} headers are removed. Otherwise,
all {@code "Expect"} headers are removed completely. in HttpHeaders
If {@code expected} is {@code true}, the {@code "Expect: 100-continue"} header
is set and all other previous {@code "Expect"} headers are removed. Otherwise,
all {@code "Expect"} headers are removed completely. in HttpUtil
Motivation:
These methods were recently deprecated. However, they remained in use in several locations in Netty's codebase.
Modifications:
Netty's code will now access the bootstrap config to get the group or child group.
Result:
No impact on functionality.
Motivation:
We use pre-instantiated exceptions in various places for performance reasons. These exceptions don't include a stacktrace which makes it hard to know where the exception was thrown. This is especially true as we use the same exception type (for example ChannelClosedException) in different places. Setting some StackTraceElements will provide more context as to where these exceptions original and make debugging easier.
Modifications:
Set a generated StackTraceElement on these pre-instantiated exceptions which at least contains the origin class and method name. The filename and linenumber are specified as unkown (as stated in the javadocs of StackTraceElement).
Result:
Easier to find the origin of a pre-instantiated exception.
Motivation:
When HTTPS is used we should use https in the sec-websocket-origin / origin header
Modifications:
- Correctly generate the sec-websocket-origin / origin header
- Add unit tests.
Result:
Generate correct header.
`HttpContentDecoder` was removing `Content-Length` header but not adding a `Transfer-Encoding` header which goes against the HTTP spec.
Added `Transfer-Encoding` header with value `chunked` when `Content-Length` is removed.
Modified existing unit test to also check for this condition.
Compliance with HTTP spec.
Motivation:
When using HttpContentCompressor and the HttpResponse is protocol version 1.0, HttpContentEncoder.encode() should not set the transfer-encoding header to chunked. Chunked transfer-encoding is not valid for HTTP 1.0 - this causes ERR_CONTENT_DECODING_FAILED errors in chrome and similar failures in IE.
Modifications:
Skip HTTP/1.0 messages
Result:
Be able to serve HTTP/1.0 as well when HttpContentEncoder is in the pipeline.
Motivation:
Its completly fine for ChunkedInput.readChunk(...) to return null to indicate there is currently not any data to read. We need to handle this in HttpChunkedInput to not produce a NPE when constructing the HttpContent.
Modifications:
If readChunk(...) return null just return null as well.
Result:
No more NPE.
Motivation:
I cherry-picked 819b26b too soon. There were entries added to a deprecated class which should only go into the non-deprecated version of the class.
Modifications:
- Remove the static final variables that were added as duplicates to the deprecated class
Result:
Deprecated code does not grown in volume without need.
Motivation:
Some commons values are missing from HttpHeader values constants.
Modifications:
- Add constants for "application/json" Content-Type
- Add constants for "gzip,deflate" Content-Encoding
Result:
More HttpHeader values constants available, both in
`HttpHeaders.Values` and `HttpHeaderValues`.
Motivation:
Support fetches data chunk by chunk for use with WebSocket chunked transfers.
Modifications:
Create a WebSocketChunkedInput.java that add to io.netty.handler.codec.http.websocketx package
Result:
The WebSocket transfers/fetches data chunk by chunk.
Motivation:
JCTools supports both non-unsafe, unsafe versions of queues and JDK6 which allows us to shade the library in netty-common allowing it to stay "zero dependency".
Modifications:
- Remove copy paste JCTools code and shade the library (dependencies that are shaded should be removed from the <dependencies> section of the generated POM).
- Remove usage of OneTimeTask and remove it all together.
Result:
Less code to maintain and easier to update JCTools and less GC pressure as the queue implementation nt creates so much garbage
Motivation:
When the channel is closed while we still decode the headers we currently not preserve correct message sequence. In this case we should generate an invalid message with a current cause.
Modifications:
Create an invalid message with a PrematureChannelClosureException as cause when the channel is closed while we decode the headers.
Result:
Correct message sequence preserved and correct DecoderResult if the channel is closed while decode headers.
Motivation:
The user may specify to use a different allocator then the default. In this case we need to ensure it is shared when creating the EmbeddedChannel inside of a ChannelHandler
Modifications:
Use the config of the "original" Channel in the EmbeddedChannel and so share the same allocator etc.
Result:
Same type of buffers are used.
Motivation:
At the moment the user is responsible to increase the writer index of the composite buffer when a new component is added. We should add some methods that handle this for the user as this is the most popular usage of the composite buffer.
Modifications:
Add new methods that autoamtically increase the writerIndex when buffers are added.
Result:
Easier usage of CompositeByteBuf.
Motivation:
The HPACK code currently disallows empty header names. This is not explicitly forbidden by the HPACK RFC https://tools.ietf.org/html/rfc7541. However the HTTP/1.x RFC https://tools.ietf.org/html/rfc7230#section-3.2 and thus HTTP/2 both disallow empty header names, and so this precondition check should be moved from the HPACK code to the protocol level.
HPACK also requires that string literals which are huffman encoded must be treated as an encoding error if the string has more than 7 trailing padding bits https://tools.ietf.org/html/rfc7541#section-5.2, but this is currently not enforced.
Result:
- HPACK to allow empty header names
- HTTP/1.x and HTTP/2 header validation should not allow empty header names
- Enforce max of 7 trailing padding bits
Result:
Code is more compliant with the above mentioned RFCs
Fixes https://github.com/netty/netty/issues/5228
Related: #4333#4421#5128
Motivation:
slice(), duplicate() and readSlice() currently create a non-recyclable
derived buffer instance. Under heavy load, an application that creates a
lot of derived buffers can put the garbage collector under pressure.
Modifications:
- Add the following methods which creates a non-recyclable derived buffer
- retainedSlice()
- retainedDuplicate()
- readRetainedSlice()
- Add the new recyclable derived buffer implementations, which has its
own reference count value
- Add ByteBufHolder.retainedDuplicate()
- Add ByteBufHolder.replace(ByteBuf) so that..
- a user can replace the content of the holder in a consistent way
- copy/duplicate/retainedDuplicate() can delegate the holder
construction to replace(ByteBuf)
- Use retainedDuplicate() and retainedSlice() wherever possible
- Miscellaneous:
- Rename DuplicateByteBufTest to DuplicatedByteBufTest (missing 'D')
- Make ReplayingDecoderByteBuf.reject() return an exception instead of
throwing it so that its callers don't need to add dummy return
statement
Result:
Derived buffers are now recycled when created via retainedSlice() and
retainedDuplicate() and derived from a pooled buffer
