Motivation:
This is a followup for #7860. In the fix for #7860 we only partly fixed the problem as Http2UnknownFrame did not correctly extend HttpStreamFrame and so only worked when using the Http2FrameCodec. We need to have it extend HttpStreamFrame as otherwise Http2MultiplexCodec will reject to handle it correctly.
Modifications:
- Let Http2UnknownFrame extend HttpStreamFrame
- Add unit tests for writing and reading Http2UnkownFrame instances when the Http2MultiplexCodec is used.
Result:
Fixes https://github.com/netty/netty/issues/7969.
Motivation:
When a sender sends too large of headers it should not unnecessarily
kill the connection, as killing the connection is a heavy-handed
solution while SETTINGS_MAX_HEADER_LIST_SIZE is advisory and may be
ignored.
The maxHeaderListSizeGoAway limit in HpackDecoder is unnecessary because
any headers causing the list to exceeding the max size can simply be
thrown away. In addition, DefaultHttp2FrameReader.HeadersBlockBuilder
limits the entire block to maxHeaderListSizeGoAway. Thus individual
literals are limited to maxHeaderListSizeGoAway.
(Technically, literals are limited to 1.6x maxHeaderListSizeGoAway,
since the canonical Huffman code has a maximum compression ratio of
.625. However, the "unnecessary" limit in HpackDecoder was also being
applied to compressed sizes.)
Modifications:
Remove maxHeaderListSizeGoAway checking in HpackDecoder and instead
eagerly throw away any headers causing the list to exceed
maxHeaderListSize.
Result:
Fewer large header cases will trigger connection-killing.
DefaultHttp2FrameReader.HeadersBlockBuilder will still kill the
connection when maxHeaderListSizeGoAway is exceeded, however.
Fixes#7887
Motivation:
Integer autoboxing in this class (and possibly also the varargs arrays)
showed non-negligible CPU and garbage contribution when profiling a gRPC
service. grpc-java currently hardcodes use of Http2FrameLogger, set at
DEBUG level.
Modifications:
Wrap offending log statements in conditional blocks.
Result:
Garbage won't be produced by Http2FrameLogger when set to a disabled
logging level.
Motivation:
Streams can be deregistered so we can't assume their existence in the stream map.
Modifications:
Add a null-check in case a stream has been deregistered.
Result:
Fixes#7898.
Motivation:
We incorrectly called frame.release() in onHttp2GoAwayFrame which could lead to IllegalReferenceCountExceptions. The call of release() is inappropriate because the fireChannelRead() in onHttp2Frame() will handle it.
Modifications:
- Not call frame.release()
- Add a unit test
Result:
Fxies https://github.com/netty/netty/issues/7892.
It is possible to create streams in the half-closed state where the
stream state doesn't reflect that the request headers have been sent by
the client or the server hasn't received the request headers. This
state isn't possible in the H2 spec as a half closed stream must have
either received a full request or have received the headers from a
pushed stream. In the current implementation, this can cause the stream
created as part of an h2c upgrade request to be in this invalid state
and result in the omission of RST frames as the client doesn't believe
it has sent the request to begin with.
Modification:
The `DefaultHttp2Connection.activate` method checks the state and
modifies the status of the request headers as appropriate.
Result:
Fixes#7847.
Motivation:
When connecting to an HTTP/2 server that did not set any value for the
SETTINGS_MAX_HEADER_LIST_SIZE in the settings frame, the netty client was
imposing an arbitrary maximum header list size of 8kB. There should be no need
for the client to enforce such a limit if the server has not specified any
limit. This caused an issue for a grpc-java client that needed to send a large
header to a server via an Envoy proxy server. The error condition is
demonstrated here: https://github.com/JLofgren/demo-grpc-java-bug-4284
Fixes grpc-java issue #4284 - https://github.com/grpc/grpc-java/issues/4284
and netty issue #7825 - https://github.com/netty/netty/issues/7825
Modifications:
In HpackEncoder use MAX_HEADER_LIST_SIZE as default maxHeader list size.
Result:
HpackEncoder will only enforce a max header list size if the server has
specified a limit in its settings frame.
Motivation:
We should allow to write Http2UnkownFrame to allow custom extensions.
Modifications:
Allow to write Http2UnkownFrame
Add unit test
Result:
Fixes https://github.com/netty/netty/issues/7860.
Motivation:
There is a race between both flushing the upgrade response and receiving
more data before the flush ChannelPromise can fire and reshape the
pipeline. Since We have already committed to an upgrade by writing the
upgrade response, we need to be immediately prepared for handling the
next protocol.
Modifications:
The pipeline reshaping logic in HttpServerUpgradeHandler has been moved
out of the ChannelFutureListener attached to the write of the upgrade
response and happens immediately after the writeAndFlush call, but
before the method returns.
Result:
The pipeline is no longer subject to receiving more data before the
pipeline has been reformed.
Motivation:
We did not correctly set the stream id in the headers of HttpMessage when converting a Http2HeadersFrame. This is based on https://github.com/netty/netty/pull/7778 so thanks to @jprante.
Modifications:
- Correctly set the id when possible in the header.
- Add test case
Result:
Correctly include stream id.
Motivation:
Allow the observation of SETTINGS frame by other handlers in the pipeline. For my particular use case this allows me to observe the value of MAX_CONCURRENT_STREAMS for a ChannelPool abstraction that supports HTTP/2 multiplexing. Beside this also forward GOAWAY frames.
Modification:
Always forward SETTINGS and GOAWAY frames
Result:
Settings / Goaway can now be observed in the parent channel. Previously it was not possible (to my knowledge) to capture the settings when using Http2MultiplexCodec.
Motivation:
At the moment we use a ByteBuf as the payload for a http2 frame. This complicates life-time management a lot with no real gain and also may produce more objects then needed. We should just use a long as it is required to be 8 bytes anyway.
Modifications:
Use long for ping payloads.
Result:
Fixes [#7629].
Motivation:
Reflective setAccessible(true) will produce scary warnings on the console when using java9+, while netty still works. That said users may feel uncomfortable with these warnings, we should not try to do it by default when using java9+.
Modifications:
Add io.netty.tryReflectionSetAccessible system property which controls if setAccessible(...) will be used. By default it will bet set to false when using java9+.
Result:
Fixes [#7254].
Motivation:
According to the spec:
All pseudo-header fields MUST appear in the header block before regular
header fields. Any request or response that contains a pseudo-header
field that appears in a header block after
a regular header field MUST be treated as malformed (Section 8.1.2.6).
Pseudo-header fields are only valid in the context in which they are defined.
Pseudo-header fields defined for requests MUST NOT appear in responses;
pseudo-header fields defined for responses MUST NOT appear in requests.
Pseudo-header fields MUST NOT appear in trailers.
Endpoints MUST treat a request or response that contains undefined or
invalid pseudo-header fields as malformed (Section 8.1.2.6).
Clients MUST NOT accept a malformed response. Note that these requirements
are intended to protect against several types of common attacks against HTTP;
they are deliberately strict because being permissive can expose
implementations to these vulnerabilities.
Modifications:
- Introduce validation in HPackDecoder
Result:
- Requests with unknown pseudo-field headers are rejected
- Requests with containing response specific pseudo-headers are rejected
- Requests where pseudo-header appear after regular header are rejected
- h2spec 8.1.2.1 pass
Motivation:
We should convert Http2Exceptions that are produced because of STREAM_CLOSED to ClosedChannelException when hand-over to the child channel to make it more consistent with other transports.
Modifications:
- Check if STREAM_CLOSED is used and if so create a new ClosedChannelException (while preserve the original exception as cause) and use it in the child channel
- Ensure STREAM_CLOSED is used in DefaultHttp2RemoteFlowController when writes are failed because of a closed stream.
- Add testcase
Result:
More consistent and correct exception usage.
Motivation:
When checking if a value is present, ReadOnlyHttp2Headers always ignores
case for values.
RFC 7540 says: https://tools.ietf.org/html/rfc7540#section-8.1.2
"header field names are strings of ASCII characters that are compared in a case-insensitive fashion"
But there is no such constraint on header values
Modifications:
Updated ReadOnlyHttp2Headers.contains to compare header value in a
case-sensitive way.
Result:
ReadOnlyHttp2Headers compares header names in a case-insensitive way,
values in a case-sensitive way.
Motivation:
If you test a header value providing a String, contains() returns false.
This is due to the implementation inherited from DefaultHeaders using
the JAVA_HASHER.
JAVA_HASHER.equals returns false because a is a String and b an
AsciiString.
Modifications:
DefaultHttp2Headers overrides contains and uses CASE_SENSITIVE_HASHER.
Result:
You can test a header value with any CharSequence implementation.
Motivation:
The completion order of promises in Http2MultiplexChannel#close should be consistent with that of AbstractChannel. Otherwise this may result in Future listeners seeing incorrect channel state.
Modifications:
Add tests cases.
Result:
Ensure consistent behavior between Http2MultiplexChannel and AbstractChannel.
Motivation:
Calling DefaultHttp2StreamChannel.Unsafe.close(...) multiple times should not fail.
Modification:
- Correctly handle multiple calls to DefaultHttp2StreamChannel.Unsafe.close(...)
- Complete closePromise and promise that is given to close(...) in the correct order.
- Add unit test
Result:
Fixes [#7628] and [#7641]
Motivation:
If DefaultHttp2ConnectionEncoder process outbound operation it sometimes missed to call Http2LifecycleManager.onError(...) when the operation was executed asynchronously.
Modifications:
Make best effort to update flags but still ensure failures are propageted to Http2LifecycleManager.onError(...) in all cases.
Result:
More consistent handling of errors.
Motivation:
Pseudo headers are checked less frequently than normal headers, so
it is more efficient to check the latter first.
Modifications:
Swap the order of the check, and fix minor formatting
Result:
Possibly more efficient header checks
Motivation:
We can just implement the interfaces directly and so reduce object creation in DefaultHttp2RemoteFlowController.
Modifications:
Directly implement the interfaces.
Result:
Less object creation.
Motivation:
When part of a HTTP/2 StreamChannel the Http2StreamChannel.isOpen() / isActive() should report false within a call to a ChannelInboundHandlers channelInactive() method.
Modifications:
Fullfill promise before call fireChannelInactive()
Result:
Correctly update state / promise before notify handlers. Fixes [#7638]
Motivation:
With HTTP1, it's very easy to check if a header is present and has a
given value: you can simply invoke
io.netty.handler.codec.http.HttpHeaders#contains(java.lang.CharSequence, java.lang.CharSequence, boolean)
It is not possible to do the same with HTTP2. You have to get the list
of all headers (returned as String) and then iterate over it invoking
String#equals or String#equalsIgnoreCase
Modifications:
I've added io.netty.handler.codec.http2.Http2Headers#contains and
implemented it in DefaultHttp2Headers, EmptyHttp2Headers and ReadOnlyHttp2Headers.
Result:
You can use AsciiString constants to check if a header is present in a
consice and efficient manner.
Motivation:
Usually when using netty exceptions which happen for outbound operations should not be fired through the pipeline but only the ChannelPromise should be failed.
Modifications:
- Change Http2LifecycleManager.onError(...) to take also an boolean that indicate if the error was caused by an outbound operation
- Channel Http2ConnectionHandler.on*Error(...) methods to also take this boolean
- Change Http2FrameCodec to only fire exceptions through the pipeline if these are not outbound operations related
- Add unit test.
Result:
More consistent error handling when using Http2FrameCodec and Http2MultiplexCodec.
Motivation:
Http2MultiplexCodec swallows Http2PingFrames without releasing the payload, resulting in a memory leak.
Modification:
Send unhandled frames down the pipeline for consumption/disposal by another InboundChannelHandler.
Result:
Fixes#7607.
Motivation:
Usages of HttpResponseStatus may result in more object allocation then necessary due to not looking for cached objects and the AsciiString parsing method not being used due to CharSequence method being used instead.
Modifications:
- HttpResponseDecoder should attempt to get the HttpResponseStatus from cache instead of allocating a new object
- HttpResponseStatus#parseLine(CharSequence) should check if the type is AsciiString and redirect to the AsciiString parsing method which may not require an additional toString call
- HttpResponseStatus#parseLine(AsciiString) can be optimized and doesn't require and may not require object allocation
Result:
Less allocations when dealing with HttpResponseStatus.
Motivation:
When we cancel the flowcontrolled writes we did create a new StreamException for each write that was enqueued. Creating Exceptions is very expensive due of filling the stacktrace.
Modifications:
Only create the StreamException once and reuse the same for all the flowcontrolled writes (per stream).
Result:
Less expensive to cancel flowcontrolled writes.
Motivation:
Http2FrameCodec increases the initialWindowSize when the user attempts to increase the connection flow control window. The initialWindowSize should only be touched as a result of a SETTINGS frame, and otherwise may result in flow control getting out of sync with our peer.
Modifications:
- Http2FrameCodec shouldn't update the initialWindowSize when a WindowUpdateFrame is written on the connection channel
Result:
More correct WindowUpdate processing.
Motivation:
HPackDecoder works on entire header block, we shouldn't encounter
incomplete header fields. If we do we should treat it as
a decoding error and according to the specification:
A decoding error in a header block MUST be treated as
a connection error (Section 5.4.1) of type COMPRESSION_ERROR.
Modifications:
* Check final state in HpackDecoder once we've decoded all the data.
Result:
* Throw a connection error if we receive incomplete header fields
* H2spec 4.3 tests all passes
Motivation:
Http2FrameStream#CONNECTION_STREAM is required to identify the
connection stream. However this leads to inconsistent usage from a user
perspective. When a user creates a Http2Frame for a non-connection
stream, the Http2MultiplexCodec automatically sets the stream, and the
user is never exposed to the Http2FrameStream object. However when the
user writes a Http2Frame for a connection stream they are required to
set the Http2FrameStream object. We can remove the Http2FrameStream#CONNECTION_STREAM
and keep the Http2FrameStream object internal, and therefore consistent
between the connection and non-connection use cases.
Modifications:
- Remove Http2FrameStream#CONNECTION_STREAM
- Update Http2FrameCodec to handle Http2Frame#stream() which returns
null
Result:
More consistent usage on http2 parent channel and http2 child channel.
Motivation:
Http2FrameCodecTest#newOutboundStream has a timeout of 1 second and has been observed to timeout on CI servers.
Modifications:
- Increase the timeout to 5 seconds
Result:
Less false positive test failures on CI servers.
Motivation:
HpackDecoder#addHeader takes in the streamId as a parameter but no longer uses it.
Modifications:
- Remove the streamId parameter from HpackDecoder#addHeader
Result:
Less unused parameters in HpackDecoder.
Motivation:
According to the HTTP/2 Spec:
SETTINGS_MAX_HEADER_LIST_SIZE (0x6): This advisory setting informs a
peer of the maximum size of header list that the sender is
prepared to accept, in octets. The value is based on the
uncompressed size of header fields, including the length of the
name and value in octets plus an overhead of 32 octets for each
header field.
We were accounting for the 32 bytes when encoding in HpackEncoder,
but not when decoding in HPackDecoder.
Modifications:
- Add 32 bytes to the header list length for each entry when decoding
with HPackDecoder.
Result:
- We account for the 32 bytes overhead by header entry in HPackDecoder
