Motivation:
HttpObjectDecoder may throw an IllegalArgumentException if it encounters
a character that Character.isWhitespace() returns true for, but is not
one of the two valid OWS (optional whitespace) values. Such values may
not have friendly or readable toString() values. We should include the
hex value so that the illegal character can always be determined.
Modifications:
Add hex value as well
Result:
Easier to debug
Co-authored-by: Bennett Lynch <Bennett-Lynch@users.noreply.github.com>
Motivation:
To make it possible to experiment with alternative buffer implementations, we need a way to abstract away the concrete buffers used throughout most of the Netty pipelines, while still having a common currency for doing IO in the end.
Modification:
- Introduce an ByteBufConvertible interface, that allow arbitrary objects to convert themselves into ByteBuf objects.
- Every place in the code, where we did an instanceof check for ByteBuf, we now do an instanceof check for ByteBufConvertible.
- ByteBuf itself implements ByteBufConvertible, and returns itself from the asByteBuf method.
Result:
It is now possible to use Netty with alternative buffer implementations, as long as they can be converted to ByteBuf.
This has been verified elsewhere, with an alternative buffer implementation.
Motivation:
- Underlying buffer usages might be erroneous when releasing them internaly
in HttpPostMultipartRequestDecoder.
2 bugs occurs:
1) Final File upload seems not to be of the right size.
2) Memory, even in Disk mode, is increasing continuously, while it shouldn't.
- Method `getByte(position)` is too often called within the current implementation
of the HttpPostMultipartRequestDecoder.
This implies too much activities which is visible when PARANOID mode is active.
This is also true in standard mode.
Apply the same fix on buffer from HttpPostMultipartRequestDecoder to HttpPostStandardRequestDecoder
made previously.
Finally in order to ensure we do not rewrite already decoded HttpData when decoding
next ones within multipart, we must ensure the buffers are copied and not a retained slice.
Modification:
- Add some tests to check consistency for HttpPostMultipartRequestDecoder.
Add a package protected method for testing purpose only.
- Use the `bytesBefore(...)` method instead of `getByte(pos)` in order to limit the external
access to the underlying buffer by retrieving iteratively the beginning of a correct start
position.
It is used to find both LF/CRLF and delimiter.
2 methods in HttpPostBodyUtil were created for that.
The undecodedChunk is copied when adding a chunk to a DataMultipart is loaded.
The same buffer is also rewritten in order to release the copied memory part.
Result:
Just for note, for both Memory or Disk or Mixed mode factories, the release has to be done as:
for (InterfaceHttpData httpData: decoder.getBodyHttpDatas()) {
httpData.release();
factory.removeHttpDataFromClean(request, httpData);
}
factory.cleanAllHttpData();
decoder.destroy();
The memory used is minimal in Disk or Mixed mode. In Memory mode, a big file is still
in memory but not more in the undecodedChunk but its own buffer (copied).
In terms of benchmarking, the results are:
Original code Benchmark Mode Cnt Score Error Units
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigAdvancedLevel thrpt 6 0,152 ± 0,100 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigDisabledLevel thrpt 6 0,543 ± 0,218 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigParanoidLevel thrpt 6 0,001 ± 0,001 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigSimpleLevel thrpt 6 0,615 ± 0,070 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighAdvancedLevel thrpt 6 0,114 ± 0,063 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighDisabledLevel thrpt 6 0,664 ± 0,034 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighParanoidLevel thrpt 6 0,001 ± 0,001 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighSimpleLevel thrpt 6 0,620 ± 0,140 ops/ms
New code Benchmark Mode Cnt Score Error Units
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigAdvancedLevel thrpt 6 4,037 ± 0,358 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigDisabledLevel thrpt 6 4,226 ± 0,471 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigParanoidLevel thrpt 6 0,875 ± 0,029 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigSimpleLevel thrpt 6 4,346 ± 0,275 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighAdvancedLevel thrpt 6 2,044 ± 0,020 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighDisabledLevel thrpt 6 2,278 ± 0,159 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighParanoidLevel thrpt 6 0,174 ± 0,004 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighSimpleLevel thrpt 6 2,370 ± 0,065 ops/ms
In short, using big file transfers, this is about 7 times faster with new code, while
using high number of HttpData, this is about 4 times faster with new code when using Simple Level.
When using Paranoid Level, using big file transfers, this is about 800 times faster with new code, while
using high number of HttpData, this is about 170 times faster with new code.
Motivation:
File.createTempFile(String, String)` will create a temporary file in the system temporary directory if the 'java.io.tmpdir'. The permissions on that file utilize the umask. In a majority of cases, this means that the file that java creates has the permissions: `-rw-r--r--`, thus, any other local user on that system can read the contents of that file.
This can be a security concern if any sensitive data is stored in this file.
This was reported by Jonathan Leitschuh <jonathan.leitschuh@gmail.com> as a security problem.
Modifications:
Use Files.createTempFile(...) which will use safe-defaults when running on java 7 and later. If running on java 6 there isnt much we can do, which is fair enough as java 6 shouldnt be considered "safe" anyway.
Result:
Create temporary files with sane permissions by default.
Motivation:
The changes introduced in 1c230405fd did cause various issues while the fix itself is not considered critical. For now it is considered the best to just rollback and investigate more.
Modifications:
- Revert changes done in 1c230405fd (and later) for
the post decoders.
- Ensure we give memory back to the system as soon as possible in a safe manner
Result:
Fixes https://github.com/netty/netty/issues/10973
Motivation:
We currently append extensions to the user defined "sec-websocket-extensions" headers. This can cause duplicated entries.
Modifications:
* Replace existing `WebSocketExtensionUtil#appendExtension` private helper with a new `computeMergeExtensionsHeaderValue`. User defined parameters have higher precedence.
* Add tests (existing method wasn't tested)
* Reuse code for both client and server side (code was duplicated).
Result:
No more duplicated entries when user defined extensions overlap with the ones Netty generated.
Motivation:
switch is used when we have a good amount of cases because switch is faster than if-else. However, we're using only 1 case in switch which can affect performance.
Modification:
Changed switch to if.
Result:
Good code.
Motivation:
To fix the infinite loop parsing a multipart body.
Modifications:
Modified the loop to use the correct variable.
Result:
Multipart bodies will be parsed correctly again.
Motivation:
According to specification 1006 status code must not be set as a status code in a
Close control frame by the endpoint. However 1006 status code can be
used in applications to indicate that the connection was closed abnormally.
Modifications:
- Enforce status code validation in CloseWebSocketFrame
- Add WebSocketCloseStatus construction with disabled validation
- Add test
Result:
Fixes#10838
Motivation:
We should add `state` in the exception message of `HttpObjectEncoder` because it makes debugging a little easier.
Modification:
Added `state` in the exception message.
Result:
Better exception message for smooth debugging.
Motivation:
According rfc (https://tools.ietf.org/html/rfc6455#section-11.3.4), `Sec-WebSocket-Protocol` header field MUST NOT appear
more than once in an HTTP response.
At the moment we can pass `Sec-WebSocket-Protocol` via custom headers and it will be added to response.
Modification:
Change method add() to set() for avoid duplication. If we pass sub protocols in handshaker constructor it means that they are preferred over custom ones.
Result:
Less error prone behavior.
Fix issue #10508 where PARANOID mode slow down about 1000 times compared to ADVANCED.
Also fix a rare issue when internal buffer was growing over a limit, it was partially discarded
using `discardReadBytes()` which causes bad changes within previously discovered HttpData.
Reasons were:
Too many `readByte()` method calls while other ways exist (such as keep in memory the last scan position when trying to find a delimiter or using `bytesBefore(firstByte)` instead of looping externally).
Changes done:
- major change on way buffer are parsed: instead of read byte per byte until found delimiter, try to find the delimiter using `bytesBefore()` and keep the last unfound position to skeep already parsed parts (algorithms are the same but implementation of scan are different)
- Change the condition to discard read bytes when refCnt is at most 1.
Observations using Async-Profiler:
==================================
1) Without optimizations, most of the time (more than 95%) is through `readByte()` method within `loadDataMultipartStandard` method.
2) With using `bytesBefore(byte)` instead of `readByte()` to find various delimiter, the `loadDataMultipartStandard` method is going down to 19 to 33% depending on the test used. the `readByte()` method or equivalent `getByte(pos)` method are going down to 15% (from 95%).
Times are confirming those profiling:
- With optimizations, in SIMPLE mode about 82% better, in ADVANCED mode about 79% better and in PARANOID mode about 99% better (most of the duplicate read accesses are removed or make internally through `bytesBefore(byte)` method)
A benchmark is added to show the behavior of the various cases (one big item, such as File upload, and many items) and various level of detection (Disabled, Simple, Advanced, Paranoid). This benchmark is intend to alert if new implementations make too many differences (such as the previous version where about PARANOID gives about 1000 times slower than other levels, while it is now about at most 10 times).
Extract of Benchmark run:
=========================
Run complete. Total time: 00:13:27
Benchmark Mode Cnt Score Error Units
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigAdvancedLevel thrpt 6 2,248 ± 0,198 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigDisabledLevel thrpt 6 2,067 ± 1,219 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigParanoidLevel thrpt 6 1,109 ± 0,038 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderBigSimpleLevel thrpt 6 2,326 ± 0,314 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighAdvancedLevel thrpt 6 1,444 ± 0,226 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighDisabledLevel thrpt 6 1,462 ± 0,642 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighParanoidLevel thrpt 6 0,159 ± 0,003 ops/ms
HttpPostMultipartRequestDecoderBenchmark.multipartRequestDecoderHighSimpleLevel thrpt 6 1,522 ± 0,049 ops/ms
Motivation:
https in xmlns URIs does not work and will let the maven release plugin fail:
```
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.779 s
[INFO] Finished at: 2020-11-10T07:45:21Z
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-release-plugin:2.5.3:prepare (default-cli) on project netty-parent: Execution default-cli of goal org.apache.maven.plugins:maven-release-plugin:2.5.3:prepare failed: The namespace xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" could not be added as a namespace to "project": The namespace prefix "xsi" collides with an additional namespace declared by the element -> [Help 1]
[ERROR]
```
See also https://issues.apache.org/jira/browse/HBASE-24014.
Modifications:
Use http for xmlns
Result:
Be able to use maven release plugin
Motivation:
There is no need for ByteProcessor to throw a checked exception.
The declared checked exception causes unnecessary code complications just to propagate it.
This can be cleaned up.
Modification:
ByteProcessor.process no longer declares to throw a checked exception, and all the places that were trying to cope with the checked exception have been simplified.
Result:
Simpler code.
Motivation:
There is no need for ByteProcessor to throw a checked exception.
The declared checked exception causes unnecessary code complications just to propagate it.
This can be cleaned up.
Modification:
ByteProcessor.process no longer declares to throw a checked exception, and all the places that were trying to cope with the checked exception have been simplified.
Result:
Simpler code.
Motivation:
HttpServerUpgradeHandler takes a list of protocols from an incoming
request and uses them for building a response.
Although the class does some validation while parsing the list,
it then disables HTTP header validation when it builds a responst.
The disabled validation may potentially allow
HTTP response splitting attacks.
Modifications:
- Enabled HTTP header validation in HttpServerUpgradeHandler
as a defense-in-depth measure to prevent possible
HTTP response splitting attacks.
- Added a new constructor that allows disabling the validation.
Result:
HttpServerUpgradeHandler validates incoming protocols
before including them into a response.
That should prevent possible HTTP response splitting attacks.
Motivation:
At the moment we have only one base `WebSocketHandshakeException` for handling WebSocket upgrade issues.
Unfortunately, this message contains only a string message about the cause of the failure, which is inconvenient in handling.
Modification:
Provide new `WebSocketClientHandshakeException` with `HttpResponse` field and `WebSocketServerHandshakeException` with `HttpRequest` field both of them without content for avoid reference counting
problems.
Result:
More information for more flexible handling.
Fixes#10277#4528#10639.
Motivation:
HTTP is a plaintext protocol which means that someone may be able
to eavesdrop the data. To prevent this, HTTPS should be used whenever
possible. However, maintaining using https:// in all URLs may be
difficult. The nohttp tool can help here. The tool scans all the files
in a repository and reports where http:// is used.
Modifications:
- Added nohttp (via checkstyle) into the build process.
- Suppressed findings for the websites
that don't support HTTPS or that are not reachable
Result:
- Prevent using HTTP in the future.
- Encourage users to use HTTPS when they follow the links they found in
the code.
Motivation:
I noticed WebSocketServerExtensionHandler taking up a non-trivial
amount of CPU time for a non-websocket based menchmark. This attempts
to speed it up.
Modifications:
- It is faster to check for a 101 response than to look at headers,
so an initial response code check is done
- Move all the actual upgrade code into its own method to increase
chance of this method being inlined
- Add an extra contains() check for the upgrade header, to avoid
allocating an iterator if there is no upgrade header
Result:
A small but noticable performance increase.
Signed-off-by: Stuart Douglas <stuart.w.douglas@gmail.com>
Motivation:
junit deprecated Assert.assertThat(...)
Modifications:
Use MatcherAssert.assertThat(...) as replacement for deprecated method
Result:
Less deprecation warnings
Motivation:
LGTM reports multiple issues. They need to be triaged,
and real ones should be fixed.
Modifications:
- Fixed multiple issues reported by LGTM, such as redundant conditions,
resource leaks, typos, possible integer overflows.
- Suppressed false-positives.
- Added a few testcases.
Result:
Fixed several possible issues, get rid of false alarms in the LGTM report.
Motivation:
Fix Broken Link of OWASP HttpOnly Cookie in Cookie class.
Modification:
Updated the broken link.
Result:
Broken Link Fix for better Documentation.
Motivation:
We should use ObjectUtil for checking if Compression parameters are in range. This will reduce LOC and make code more readable.
Modification:
Used ObjectUtil
Result:
More readable code
Motivation:
Avoid implicit conversions to narrower types in
AbstractMemoryHttpData and Bzip2HuffmanStageEncoder classes
reported by LGTM.
Modifications:
Updated the classes to avoid implicit casting to narrower types.
It doesn't look like that an integer overflow is possible there,
therefore no checks for overflows were added.
Result:
No warnings about implicit conversions to narrower types.
Motivation:
LGTM reported that WebSocketUtil uses MD5 and SHA-1
that are considered weak. Although those algorithms
are insecure, they are required by draft-ietf-hybi-thewebsocketprotocol-00
specification that is implemented in the corresponding WebSocket
handshakers. Once the handshakers are removed, WebSocketUtil can be
updated to stop using those weak hash functions.
Modifications:
Added SuppressWarnings annotations.
Result:
Suppressed warnings.
Add validation check about websocket path
Motivation:
I add websocket handler in custom server with netty.
I first add WebSocketServerProtocolHandler in my channel pipeline.
It does work! but I found that it can pass "/websocketabc". (websocketPath is "/websocket")
Modification:
`isWebSocketPath()` method of `WebSocketServerProtocolHandshakeHandler` now checks that "startsWith" applies to the first URL path component, rather than the URL as a string.
Result:
Requests to "/websocketabc" are no longer passed to handlers for requests that starts-with "/websocket".
Motivation:
We wish to use Unsafe as little as possible, and Java 8 allows us
to take some short-cuts or play some tricks with generics,
for the purpose of working around having to declare all checked
exceptions. Ideally all checked exceptions would be declared, but
the code base is not ready for that yet.
Modification:
The call to UNSAFE.throwException has been removed, so when we need
that feature, we instead use the generic exception trick.
In may cases, Java 8 allows us to throw Throwable directly. This
happens in cases where no exception is declared to be thrown in a
scope.
Finally, some warnings have also been fixed, and some imports have
been reorganised and cleaned up while I was modifying the files
anyway.
Result:
We no longer use Unsafe for throwing any exceptions.
Motivation:
Consider a scenario when the client iniitiates a WebSocket handshake but before the handshake is complete,
the channel is closed due to some reason. In such scenario, the handshake timeout scheduled on the executor
is not cleared. The reason it is not cleared is because in such cases the handshakePromise is not completed.
Modifications:
This change completes the handshakePromise exceptinoally on channelInactive callback, if it has not been
completed so far. This triggers the callback on completion of the promise which clears the timeout scheduled
on the executor.
This PR also adds a test case which reproduces the scenario described above. The test case fails before the
fix is added and succeeds when the fix is applied.
Result:
After this change, the timeout scheduled on the executor will be cleared, thus freeing up thread resources.
Motivation:
If DeleteOnExitHook is in the open state and the program runs for a long time, the DeleteOnExitHook file keeps increasing.
This results in a memory leak
Modification:
I re-customized a DeleteOnExitHook hook. If DeleteOnExitHook is turned on, this hook will be added when creating a temporary file. After the request ends and the corresponding resources are released, the current file will be removed from this hook, so that it will not increase all the time.
Result:
Fixes https://github.com/netty/netty/issues/10351
Motivation
ByteBuf has an isAccessible method which was introduced as part of ref
counting optimizations but there are some places still doing
accessibility checks by accessing the volatile refCnt() directly.
Modifications
- Have PooledNonRetained(Duplicate|Sliced)ByteBuf#isAccessible() use
their refcount delegate's isAccessible() method
- Add static isAccessible(buf) and ensureAccessible(buf) methods to
ByteBufUtil
(since ByteBuf#isAccessible() is package-private)
- Adjust DefaultByteBufHolder and similar classes to use these methods
rather than access refCnt() directly
Result
- More efficient accessibility checks in more places
Motivation:
This is small fixes for #10453 PR according @njhill and @normanmaurer conversation.
Modification:
Simple refactor and takes into account remainder when calculate size.
Result:
Behavior is correct
Motivation:
AbstractDiskHttpData#getChunk opens and closes fileChannel every time when it is invoked,
as a result the uploaded file is corrupted. This is a regression caused by #10270.
Modifications:
- Close the fileChannel only if everything was read or an exception is thrown
- Add unit test
Result:
AbstractDiskHttpData#getChunk closes fileChannel only if everything was read or an exception is thrown
Motivation:
Regression appeared after making changes in fix#10360 .
The main problem here that `buffer.getBytes(buffer.readerIndex(), fileChannel, fileChannel.position(), localsize)`
doesn't change channel position after writes.
Modification:
Manually set position according to the written bytes.
Result:
Fixes#10449 .
Motivation:
Since https://github.com/netty/netty/pull/9865 (Netty 4.1.44) the
default behavior of the HttpObjectDecoder has been to reject any HTTP
message that is found to have multiple Content-Length headers when
decoding. This behavior is well-justified as per the risks outlined in
https://github.com/netty/netty/issues/9861, however, we can see from the
cited RFC section that there are multiple possible options offered for
responding to this scenario:
> If a message is received that has multiple Content-Length header
> fields with field-values consisting of the same decimal value, or a
> single Content-Length header field with a field value containing a
> list of identical decimal values (e.g., "Content-Length: 42, 42"),
> indicating that duplicate Content-Length header fields have been
> generated or combined by an upstream message processor, then the
> recipient MUST either reject the message as invalid or replace the
> duplicated field-values with a single valid Content-Length field
> containing that decimal value prior to determining the message body
> length or forwarding the message.
https://tools.ietf.org/html/rfc7230#section-3.3.2
Netty opted for the first option (rejecting as invalid), which seems
like the safest, but the second option (replacing duplicate values with
a single value) is also valid behavior.
Modifications:
* Introduce "allowDuplicateContentLengths" parameter to
HttpObjectDecoder (defaulting to false).
* When set to true, will allow multiple Content-Length headers only if
they are all the same value. The duplicated field-values will be
replaced with a single valid Content-Length field.
* Add new parameterized test class for testing different variations of
multiple Content-Length headers.
Result:
This is a backwards-compatible change with no functional change to the
existing behavior.
Note that the existing logic would result in NumberFormatExceptions
for header values like "Content-Length: 42, 42". The new logic correctly
reports these as IllegalArgumentException with the proper error message.
Additionally note that this behavior is only applied to HTTP/1.1, but I
suspect that we may want to expand that to include HTTP/1.0 as well...
That behavior is not modified here to minimize the scope of this change.
Motivation:
AbstractDiskHttpData may cause a memory leak when a CompositeByteBuf is used. This happened because we may call copy() but actually never release the newly created ByteBuf.
Modifications:
- Remove copy() call and just use ByteBuf.getBytes(...) which will internally handle the writing to the FileChannel without any extra copies that need to be released later on.
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/10354
Motivation
HttpObjectDecoder and its associated classes make frequent use of
default values for maxInitialLineLength, maxHeaderSize, maxChunkSize,
etc. Today, these defaults are defined in-line in constructors and
duplicated across many classes. This repetition is more prone to error
and inconsistencies.
Furthermore, due to the current lack of builder support, if a user wants
to change just one of these values (e.g., maxHeaderSize), they are also
required to know and repeat the other default values (e.g.,
maxInitialLineLength and maxChunkSize).
The primary motivation for this change is as we are considering adding
another constructor parameter (for multiple content length behavior),
appending this parameter may require some users to have prior knowledge
of the default initialBufferSize, and it would be cleaner to allow them
to reference the default constant.
Modifications
* Consolidate the HttpObjectDecoder default values into public constants
* Reference these constants where possible
Result
No functional change. Additional telescoping constructors will be easier
and safer to write. Users may have an easier experience changing single
parameters.
Motivation:
`containsValue()` will check if there are multiple values defined in the specific header name, we need to use this method instead of `contains()` for the `Transfer-Encoding` header to cover the case that multiple values defined, like: `Transfer-Encoding: gzip, chunked`
Modification:
Change from `contains()` to `containsValue()` in `HttpUtil.isTransferEncodingChunked()` method.
Result:
Fixes#10320
Motivation:
Currently we passing custom websocket handshaker response headers to a `WebSocketServerHandshaker` but they can contain a reserved headers (e.g. Connection, Upgrade, Sec-Websocket-Accept) what lead to duplication because we use response.headers().add(..) instead of response.headers().set(..).
Modification:
In each `WebSocketServerHandshaker00`, ... `WebSocketServerHandshaker13` implementation replace the method add(..) to set(..) for reserved response headers.
Result:
Less error-prone
Motivation:
`FileChannel.read()` may throw an IOException. We must deal with this in case of the occurrence of `I/O` error.
Modification:
Place the `FileChannel.read()` method call in the `try-finally` block.
Result:
Advoid fd leak.
Co-authored-by: Norman Maurer <norman_maurer@apple.com>
Motivations
-----------
HttpPostStandardRequestDecoder was changed in 4.1.50 to provide its own
ByteBuf UrlDecoder. Prior to this change, it was using the decodeComponent
method from QueryStringDecoder which decoded + characters to
whitespaces. This behavior needs to be preserved to maintain backward
compatibility.
Modifications
-------------
Changed HttpPostStandardRequestDecoder to detect + bytes and decode them
toe whitespaces. Added a test.
Results
-------
Addresses issues#10284
Motivation:
We cant reuse the ChannelPromise as it will cause an error when trying to ful-fill it multiple times.
Modifications:
- Use a new promise and chain it with the old one
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/10240
Motivation:
Handling of `WebSocketCloseFrame` is part of websocket protocol, so it's logical to put it within the `WebSocketProtocolHandler`. Also, removal of `WebSocketCloseFrameHandler` will decrease the channel pipeline.
Modification:
- `WebSocketCloseFrameHandler` code merged into `WebSocketProtocolHandler`. `WebSocketCloseFrameHandler` not added to the pipeline anymore
- Added additional constructor to `WebSocketProtocolHandler`
- `WebSocketProtocolHandler` now implements `ChannelOutboundHandler` and implements basic methods from it
Result:
`WebSocketCloseFrameHandler` is no longer used.
Fixes https://github.com/netty/netty/issues/9944
Motivation:
We should not use Unpooled to allocate buffers if possible to ensure we can make use of pooling etc.
Modifications:
- Only allocate a buffer if really needed
- Use the ByteBufAllocator of the offered ByteBuf
- Ensure we not use buffer.copy() but explicitly allocate a buffer and then copy into it to not hit the limit of maxCapacity()
Result:
Improve allocations
Motivation:
We need to release all ByteBufs that we allocate to prevent leaks. We missed to release the ByteBufs that are used to aggregate in two cases
Modifications:
Add release() calls
Result:
No more memory leak in HttpPostMultipartRequestDecoder
Motivations
-----------
There is no need to copy the "offered" ByteBuf in HttpPostRequestDecoder
when the first HttpContent ByteBuf is also the last (LastHttpContent) as
the full content can immediately be decoded. No extra bookeeping needed.
Modifications
-------------
HttpPostMultipartRequestDecoder
- Retain the first ByteBuf when it is both the first HttpContent offered
to the decoder and is also LastHttpContent.
- Retain slices of the final buffers values
Results
-------
ByteBufs of FullHttpMessage decoded by HttpPostRequestDecoder are no longer
unnecessarily copied. Attributes are extracted as retained slices when
the content is multi-part. Non-multi-part content continues to return
Unpooled buffers.
Partially addresses issue #10200
Motivation:
`AbstractHttpData.checkSize` may throw an IOException if we set the max size limit via `AbstractHttpData.setMaxSize`. However, if this exception happens, the `AbstractDiskHttpData.file` and the `AbstractHttpData.size` are still be modified. In other words, it may break the failure atomicity here.
Modification:
Just move up the size check.
Result:
Keep the failure atomicity even if `AbstractHttpData.checkSize` fails.
Motivation:
An unexpected IOException may be thrown from `FileChannel.force`. If it happens, the `FileChannel.close` may not be invoked.
Modification:
Place the `FileChannel.close` in a finally block.
Result:
Avoid fd leak.
Motivation:
`RandomAccessFile.setLength` may throw an IOException. We must deal with this in case of the occurrence of `I/O` error.
Modification:
Place the `RandomAccessFile.setLength` method call in the `try-finally` block.
Result:
Avoid fd leak.
Motivation:
`FileChannel.force` may throw an IOException. A fd leak may happen here.
Modification:
Close the fileChannel in a finally block.
Result:
Avoid fd leak.
Motivation:
An `IOException` may be thrown from `FileChannel.write` or `FileChannel.force`, and cause the fd leak.
Modification:
Close the file in a finally block.
Result:
Avoid fd leak.
Motivation:
An IOException may be thrown from FileChannel.read, and cause the fd leak.
Modification:
Close the file when IOException occurs.
Result:
Avoid fd leak.
Motivation:
currently (http) disk based attributes or uploads are globally configured in a single directory and can also only globally be deleted on exit or not. it does not fit well multiple cases, in particular the case you have multiple servers in the same JVM.
Modification:
make it configurable per attribute/fileupload.
Result:
This PR duplicates Disk* constructor to add basedir and deleteonexit parameters and wires it in default http daa factory.
Motivation:
An IOException may be thrown from InputStream.read or checkSize method, and cause the ByteBuf leak.
Modification:
Release the ByteBuf when IOException occurs.
Result:
Avoid ByteBuf leak.
Motivation:
At the moment HttpObjectDecoder does not limit the number of controls chars. These should be counted with the initial line and so a limit should be exposed
Modifications:
- Change LineParser to also be used when skipping control chars and so enforce a limit
- Add various tests to ensure that limit is enforced
Result:
Fixes https://github.com/netty/netty/issues/10111
Motivation:
In our WebSocketClientHandshaker* implementations we "hardcode" the version number to use. This is error-prone, we should better use the WebSocketVersion so we dont need to maintain the value multiple times. Beside this we can also use an AsciiString to improve performance
Modifications:
- Use WebSocketVersion.toAsciiString
Result:
Less stuff to maintain and small performance win
Motivation:
The user may need to provide a specific HOST header. We should not override it when specified during handshake.
Modifications:
Check if a custom HOST header is already provided by the user and if so dont override it
Result:
Fixes https://github.com/netty/netty/issues/10101
Motivation:
Netty currently does not support the SameSite attribute for response cookies (see issue #8161 for discussion).
Modifications:
The attribute has been added to the DefaultCookie class as a quick fix since adding new methods to the Cookie interface would be backwards-incompatible.
ServerCookieEncoder and ClientCookieDecoder have been updated accordingly to process this value. No validation for allowed values (Lax, None, Strict) has been implemented.
Result:
Response cookies with the SameSite attribute set can be read or written by Netty.
Co-authored-by: David Latorre <a-dlatorre@hotels.com>
Motivation:
WebSocketClientHandshaker#upgradeUrl doesn't comperly compute relative url when path is empty and produces url such as `?access_token=foo` instead of `/?access_token=foo`.
Modifications:
* fix WebSocketClientHandshaker#upgradeUrl
* add tests for urls without path, with and without query
Result:
WebSocketClientHandshaker properly connects to url without path.
Motivation:
I am receiving a mutlipart/form_data upload from postman. The filename contains Chinese, and so some invalid chars. We should ensure all of these are removed before trying to decode.
Modification:
Ensure all invalid characters are removed
Result:
Fixes#10087
Co-authored-by: liming.zhang <liming.zhang@luckincoffee.com>
Motivation:
At the moment the next / prev references are not set to "null" in the DefaultChannelHandlerContext once the ChannelHandler is removed. This is bad as it basically let users still use the ChannelHandlerContext of a ChannelHandler after it is removed and may produce very suprising behaviour.
Modifications:
- Fail if someone tries to use the ChannelHandlerContext once the ChannelHandler was removed (for outbound operations fail the promise, for inbound fire the error through the ChannelPipeline)
- Fix some handlers to ensure we not use the ChannelHandlerContext after the handler was removed
- Adjust DefaultChannelPipeline / DefaultChannelHandlerContext to fixes races with removal / replacement of handlers
Result:
Cleanup behaviour and make it more predictable for pipeline modifications
Motivation:
Our parsing of the initial line / http headers did treat some characters as separators which should better trigger an exception during parsing.
Modifications:
- Tighten up parsing of the inital line by follow recommentation of RFC7230
- Restrict separators to OWS for http headers
- Add unit test
Result:
Stricter parsing of HTTP1
Motivation:
We did had some System.out.println(...) call in a test which seems to be some left-over from debugging.
Modifications:
Remove System.out.println(...)
Result:
Code cleanup
Motivation
As part of a recent commit for issue
https://github.com/netty/netty/issues/9861 the HttpObjectDecoder was
changed to throw an IllegalArgumentException (and produce a failed
decoder result) when decoding a message with both "Transfer-Encoding:
chunked" and "Content-Length".
While it seems correct for Netty to try to sanitize these types of
messages, the spec explicitly mentions that the Content-Length header
should be *removed* in this scenario.
Both Nginx 1.15.9 and Tomcat 9.0.31 also opt to remove the header:
b693d7c198/java/org/apache/coyote/http11/Http11Processor.java (L747-L755)0ad4393e30/src/http/ngx_http_request.c (L1946-L1953)
Modifications
* Change the default behavior from throwing an IllegalArgumentException
to removing the "Content-Length" header
* Extract the behavior to a new protected method,
handleChunkedEncodingWithContentLength(), that can be overridden to
change this behavior (or capture metrics)
Result
Messages of this nature will now be successfully decoded and have their
"Content-Length" header removed, rather than creating invalid messages
(decoder result failures). Users will be allowed to override and
configure this behavior.
Motivation:
Need tests to ensure that CVE-2020-7238 is fixed.
Modifications:
Added two test cases into HttpRequestDecoderTest which check that
no whitespace is allowed before the Transfer-Encoding header.
Result:
Improved test coverage for #9861
Motivation:
Avoid allocation of default static `WebSocketServerProtocolConfig` and `WebSocketClientProtocolConfig` configs. Prefer compile time constants instead.
Modification:
Static field with config object replaced with constructor with default fields.
Result:
No more default config allocation and static field for it. Compile time variables used instead.
Motivation:
At the moment we add a handler which will respond with 403 forbidden if a websocket handshake is in progress (and after). This makes not much sense as it is unexpected to have a remote peer to send another http request when the handshake was started. In this case it is much better to let the websocket decoder bail out.
Modifications:
Remove usage of forbiddenHttpRequestResponder
Result:
Fixes https://github.com/netty/netty/issues/9913
Motivation:
In next major version of netty users should use ChannelHandler everywhere. We should ensure we do the same
Modifications:
Replace usage of deprecated classes / interfaces with ChannelHandler
Result:
Use non-deprecated code
Motivation:
We should remove WebSocketServerExtensionHandler from pipeline after successful WebSocket upgrade even if the client has not selected any extensions.
Modification:
Remove handler once upgrade is complete and no extensions are used.
Result:
Fixes#9939.
Motivation:
Utf8FrameValidator must release the input buffer if the validation fails to ensure no memory leak happens
Modifications:
- Catch exception, release frame and rethrow
- Adjust unit test
Result:
Fixes https://github.com/netty/netty/issues/9906
Motivation:
Currently, characters are appended to the encoded string char-by-char even when no encoding is needed. We can instead separate out codepath that appends the entire string in one go for better `StringBuilder` allocation performance.
Modification:
Only go into char-by-char loop when finding a character that requires encoding.
Result:
The results aren't so clear with noise on my hot laptop - the biggest impact is on long strings, both to reduce resizes of the buffer and also to reduce complexity of the loop. I don't think there's a significant downside though for the cases that hit the slow path.
After
```
Benchmark Mode Cnt Score Error Units
QueryStringEncoderBenchmark.longAscii thrpt 6 1.406 ± 0.069 ops/us
QueryStringEncoderBenchmark.longAsciiFirst thrpt 6 0.046 ± 0.001 ops/us
QueryStringEncoderBenchmark.longUtf8 thrpt 6 0.046 ± 0.001 ops/us
QueryStringEncoderBenchmark.shortAscii thrpt 6 15.781 ± 0.949 ops/us
QueryStringEncoderBenchmark.shortAsciiFirst thrpt 6 3.171 ± 0.232 ops/us
QueryStringEncoderBenchmark.shortUtf8 thrpt 6 3.900 ± 0.667 ops/us
```
Before
```
Benchmark Mode Cnt Score Error Units
QueryStringEncoderBenchmark.longAscii thrpt 6 0.444 ± 0.072 ops/us
QueryStringEncoderBenchmark.longAsciiFirst thrpt 6 0.043 ± 0.002 ops/us
QueryStringEncoderBenchmark.longUtf8 thrpt 6 0.047 ± 0.001 ops/us
QueryStringEncoderBenchmark.shortAscii thrpt 6 16.503 ± 1.015 ops/us
QueryStringEncoderBenchmark.shortAsciiFirst thrpt 6 3.316 ± 0.154 ops/us
QueryStringEncoderBenchmark.shortUtf8 thrpt 6 3.776 ± 0.956 ops/us
```
Motivation:
https://github.com/netty/netty/pull/9883 added a bug-fix for the Comparator in ClientCookieEncoder but did not add a testcase.
Modifications:
- Add testcase
- Simplify code
Result:
Include a test to ensure we not regress.
Motivation:
The current implementation causes IllegalArgumetExceptions to be thrown on Java 11.
The current implementation would violate comparison contract for two cookies C1 and C2 with same path length, since C1 < C2 and C2 < C1. Returning 0 (equality) does not since C1 == C2 and C2 == C1. See #9881
Modification:
Return equality instead of less than on same path length.
Result:
Fixes#9881.
Motivation:
In Java, it is almost always at least slower to use `ByteBuffer` than `byte[]` without pooling or I/O. `QueryStringDecoder` can use `byte[]` with arguably simpler code.
Modification:
Replace `ByteBuffer` / `CharsetDecoder` with `byte[]` and `new String`
Result:
After
```
Benchmark Mode Cnt Score Error Units
QueryStringDecoderBenchmark.noDecoding thrpt 6 5.612 ± 2.639 ops/us
QueryStringDecoderBenchmark.onlyDecoding thrpt 6 1.393 ± 0.067 ops/us
QueryStringDecoderBenchmark.mixedDecoding thrpt 6 1.223 ± 0.048 ops/us
```
Before
```
Benchmark Mode Cnt Score Error Units
QueryStringDecoderBenchmark.noDecoding thrpt 6 6.123 ± 0.250 ops/us
QueryStringDecoderBenchmark.onlyDecoding thrpt 6 0.922 ± 0.159 ops/us
QueryStringDecoderBenchmark.mixedDecoding thrpt 6 1.032 ± 0.178 ops/us
```
I notice #6781 switched from an array to `ByteBuffer` but I can't find any motivation for that in the PR. Unit tests pass fine with an array and we get a reasonable speed bump.
Motivation:
ByteToMessageDecoder requires using an intermediate List to put results into. This intermediate list adds overhead (memory/CPU) which grows as the number of objects increases. This overhead can be avoided by directly propagating events through the ChannelPipeline via ctx.fireChannelRead(...). This also makes the semantics more clear and allows us to keep track if we need to call ctx.read() in all cases.
Modifications:
- Remove List from the method signature of ByteToMessageDecoder.decode(...) and decodeLast(...)
- Adjust all sub-classes
- Adjust unit tests
- Fix javadocs.
Result:
Adjust ByteToMessageDecoder as noted in https://github.com/netty/netty/issues/8525.
Motivation:
RFC7230 states that we should not accept multiple content-length headers and also should not accept a content-length header in combination with transfer-encoding: chunked
Modifications:
- Check for multiple content-length headers and if found mark message as invalid
- Check if we found a content-length header and also a transfer-encoding: chunked and if so mark the message as invalid
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9861
Motivation:
Technical speaking its valid to have http headers with no values so we should support it. That said we need to detect if these are "generated" because of an "invalid" fold.
Modifications:
- Detect if a colon is missing when parsing headers.
- Add unit test
Result:
Fixes https://github.com/netty/netty/issues/9866
Motivation:
Client can split data into different numbers of fragments and sometimes the last frame may contain trash data that doesn't affect decompression process.
Modification:
Added check if last frame is `ContinuationWebSocketFrame` and decompression data is empty
then don't throw an exception.
Result:
Fixes#9770
Motivation:
Multiple cookie values can be present in a single header.
Modification:
Add `decodeAll` overload which returns all cookies
Result:
Fixes#7210
Note:
This change is not as perscriptive as the ideas brought up in the linked issue. Changing the Set implementation or the equals/compareTo definition is likely a breaking change, so they are practical.
Motivation:
We should use Objects.requireNonNull(...) as we require java8
Modifications:
Replace ObjectUtil.checkNonNull(...) with Objects.requireNonNull(...)
Result:
Code cleanup
Motivation:
HttpPostStandardRequestDecoder may throw multiple different exceptions in the constructor which could lead to memory leaks. We need to guard against this by explicit catch all of them and rethrow after we released any allocated memory.
Modifications:
- Catch, destroy and rethrow in any case
- Ensure we correctly wrap IllegalArgumentExceptions
- Add unit tests
Result:
Fixes https://github.com/netty/netty/issues/9829
Those who need 'Origin' or 'Sec-WebSocket-Origin' headers should provide them explicitly, like it is stated in WebSocket specs.
E.g. through custom headers:
HttpHeaders customHeaders = new DefaultHttpHeaders()
.add(HttpHeaderNames.ORIGIN, "http://localhost:8080");
new WebSocketClientProtocolHandler(
new URI("ws://localhost:1234/test"), WebSocketVersion.V13, subprotocol,
allowExtensions, customHeaders, maxFramePayloadLength, handshakeTimeoutMillis)
* Remove enforced origin headers.
* Update tests
Fixes#9673: Origin header is always sent from WebSocket client
Motivation:
7ff8cde66f introduced some tests which needs some small adjustments for master.
Modifications:
Add explicit casts
Result:
master builds again without test failures
Motivation:
By default CloseWebSocketFrames are handled automatically.
However I need manually manage their sending both on client- and on server-sides.
Modification:
Send close frame on channel close automatically, when it was not send before explicitly.
Result:
No more messages like "Connection closed by remote peer" for normal close flows.
Motivation
Per javadoc in 4.1.x SimpleChannelInboundHandler:
"Please keep in mind that channelRead0(ChannelHandlerContext, I) will be
renamed to messageReceived(ChannelHandlerContext, I) in 5.0."
Modifications
Rename aforementioned method and all references/overrides.
Result
Method is renamed.
### Motivation:
Introduction of `WebSocketDecoderConfig` made our server-side code more elegant and simpler for support.
However there is still some problem with maintenance and new features development for WebSocket codecs (`WebSocketServerProtocolHandler`, `WebSocketServerProtocolHandler`).
Particularly, it makes me ~~crying with blood~~ extremely sad to add new parameter and yet another one constructor into these handlers, when I want to contribute new feature.
### Modification:
I've extracted all parameters for client and server WebSocket handlers into config/builder structures, like it was made for decoders in PR #9116.
### Result:
* Fixes#9698: Simplify WebSocket handlers constructor arguments hell
* Unblock further development in this module (configurable close frame handling on server-side; automatic close-frame sending, when missed; memory leaks on protocol violations; etc...)
Bonuses:
* All defaults are gathered in one place and could be easily found/reused.
* New API greatly simplifies usage, but does NOT allow inheritance or modification.
* New API would simplify long-term maintenance of WebSockets module.
### Example
WebSocketClientProtocolConfig config = WebSocketClientProtocolConfig.newBuilder()
.webSocketUri("wss://localhost:8443/fx-spot")
.subprotocol("trading")
.handshakeTimeoutMillis(15000L)
.build();
ctx.pipeline().addLast(new WebSocketClientProtocolHandler(config));
Motivation:
At the moment we miss to poll the method queue when we see an Informational response code. This can lead to out-of-sync of request / response pairs when later try to compare these.
Modifications:
Always poll the queue correctly
Result:
Always compare the correct request / response pairs
Motivation:
HTTP 102 (WebDAV) is not correctly treated as an informational response
Modification:
Delegate all `1XX` status codes to superclass, not just `100` and `101`.
Result:
Supports WebDAV response.
Removes a huge maintenance [headache](https://github.com/line/armeria/pull/2210) in Armeria which has forked the class for these features