Commit Graph

6501 Commits

Author SHA1 Message Date
Norman Maurer
61a5e60513 Provide helper methods in ByteBufUtil to write UTF-8/ASCII CharSequences. Related to [#909]
Motivation:

We expose no methods in ByteBuf to directly write a CharSequence into it. This leads to have the user either convert the CharSequence first to a byte array or use CharsetEncoder. Both cases have some overheads and we can do a lot better for well known Charsets like UTF-8 and ASCII.

Modifications:

Add ByteBufUtil.writeAscii(...) and ByteBufUtil.writeUtf8(...) which can do the task in an optimized way. This is especially true if the passed in ByteBuf extends AbstractByteBuf which is true for all of our implementations which not wrap another ByteBuf.

Result:

Writing an ASCII and UTF-8 CharSequence into a AbstractByteBuf is a lot faster then what the user could do by himself as we can make use of some package private methods and so eliminate reference and range checks. When the Charseq is not ASCII or UTF-8 we can still do a very good job and are on par in most of the cases with what the user would do.

The following benchmark shows the improvements:

Result: 2456866.966 ?(99.9%) 59066.370 ops/s [Average]
  Statistics: (min, avg, max) = (2297025.189, 2456866.966, 2586003.225), stdev = 78851.914
  Confidence interval (99.9%): [2397800.596, 2515933.336]

Benchmark                                                        Mode   Samples        Score  Score error    Units
i.n.m.b.ByteBufUtilBenchmark.writeAscii                         thrpt        50  9398165.238   131503.098    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeAsciiString                   thrpt        50  9695177.968   176684.821    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeAsciiStringViaArray           thrpt        50  4788597.415    83181.549    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeAsciiStringViaArrayWrapped    thrpt        50  4722297.435    98984.491    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeAsciiStringWrapped            thrpt        50  4028689.762    66192.505    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeAsciiViaArray                 thrpt        50  3234841.565    91308.009    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeAsciiViaArrayWrapped          thrpt        50  3311387.474    39018.933    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeAsciiWrapped                  thrpt        50  3379764.250    66735.415    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeUtf8                          thrpt        50  5671116.821   101760.081    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeUtf8String                    thrpt        50  5682733.440   111874.084    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeUtf8StringViaArray            thrpt        50  3564548.995    55709.512    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeUtf8StringViaArrayWrapped     thrpt        50  3621053.671    47632.820    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeUtf8StringWrapped             thrpt        50  2634029.071    52304.876    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeUtf8ViaArray                  thrpt        50  3397049.332    57784.119    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeUtf8ViaArrayWrapped           thrpt        50  3318685.262    35869.562    ops/s
i.n.m.b.ByteBufUtilBenchmark.writeUtf8Wrapped                   thrpt        50  2473791.249    46423.114    ops/s
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 1,387.417 sec - in io.netty.microbench.buffer.ByteBufUtilBenchmark

Results :

Tests run: 1, Failures: 0, Errors: 0, Skipped: 0

Results :

Tests run: 1, Failures: 0, Errors: 0, Skipped: 0

The *ViaArray* benchmarks are basically doing a toString().getBytes(Charset) which the others are using ByteBufUtil.write*(...).
2014-12-26 15:57:59 +09:00
Trustin Lee
54a27ef07e Fix NoClassDefFoundError when netty-tcnative is unavailable
Motivation:

ProxyHandlerTest fails with NoClassDefFoundError raised by
SslContext.newClientContext().

Modifications:

Fix a missing 'return' statement that makes the switch-case block fall
through unncecessarily

Result:

- ProxyHandlerTest does not fail anymore.
- SslContext.newClientContext() does not raise NoClassDefFoundError
  anymore.
2014-12-26 15:47:35 +09:00
Jeff Beck
0dca08ab12 HttpObjectAggregator only set Content-Length is not already set.
Motivation:

HEAD requests will have a Content-Length set that doesn't match the
actual length. So we only want to set Content-Length header if it isn't
already set.

Modifications:

If check around setting the Content-Length.

Result:

A HEAD request will no correctly return the specified Content-Length
instead of the body length.
2014-12-25 20:53:03 +01:00
Norman Maurer
eeb5e2c0a9 Check for errors without object allocation
Motivation:

At the moment we use SSL.getLastError() in unwrap(...) to check for error. This is very inefficient as it creates a new String for each check and we also use a String.startsWith(...) to detect if there was an error we need to handle.

Modifications:

Use SSL.getLastErrorNumber() to detect if we need to handle an error, as this only returns a long and so no String creation happens. Also the detection is much cheaper as we can now only compare longs. Once an error is detected the lately SSL.getErrorString(long) is used to conver the error number to a String and include it in log and exception message.

Result:

Performance improvements in OpenSslEngine.unwrap(...) due less object allocation and also faster comparations.
2014-12-22 21:09:18 +01:00
Norman Maurer
f13a3fbefb Use OpenSslClientContext as default if openssl is avaible
Motivation:

As we now support OpenSslEngine for client side, we should use it when avaible.

Modifications:

Use SslProvider.OPENSSL when openssl can be found

Result:

OpenSslEngine is used whenever possible
2014-12-22 21:07:28 +01:00
Norman Maurer
a86a2f6478 Allow to use custom TrustManagerFactory for JdkSslServerContent and OpenSslServerContext
Motivation:

When using client auth it is sometimes needed to use a custom TrustManagerFactory.

Modifications:

Allow to pass in TrustManagerFactory

Result:

It's now possible to use custom TrustManagerFactories for JdkSslServerContext and OpenSslServerContext
2014-12-22 20:55:55 +01:00
Norman Maurer
16f69985d4 Use TrustManager for certificate verification
Motivation:

To make OpenSsl*Context a drop in replacement for JdkSsl*Context we need to use TrustManager.

Modifications:

Correctly hook in the TrustManager

Result:

Better compatibility
2014-12-22 20:26:30 +01:00
Norman Maurer
d0b18db383 Allow to enable client authentication on the OpenSslEngine
Motivation:

At the moment there is no way to enable client authentication when using OpenSslEngine. This limits the uses of OpenSslEngine.

Modifications:

Add support for different authentication modes.

Result:

OpenSslEngine can now also be used when client authenticiation is needed.
2014-12-22 20:16:02 +01:00
Norman Maurer
7088235cac More complete OpenSslEngine SSLSession implementation
Motivation:

The current SSLSession implementation used by OpenSslEngine does not support various operations and so may not be a good replacement by the SSLEngine provided by the JDK implementation.

Modifications:

- Add SSLSession.getCreationTime()
- Add SSLSession.getLastAccessedTime()
- Add SSLSession.putValue(...), getValue(...), removeValue(...), getValueNames()
- Add correct SSLSession.getProtocol()
- Ensure OpenSSLEngine.getSession() is thread-safe
- Use optimized AtomicIntegerFieldUpdater when possible

Result:

More complete OpenSslEngine SSLSession implementation
2014-12-22 20:12:34 +01:00
Norman Maurer
60f24ac2a1 Add OpenSslClientContext to allow creating SslEngine for client side
Motivation:

We only support openssl for server side at the moment but it would be also useful for client side.

Modification:

* Upgrade to new netty-tcnative snapshot to support client side openssl support
* Add OpenSslClientContext which can be used to create SslEngine for client side usage
* Factor out common logic between OpenSslClientContext and OpenSslServerContent into new abstract base class called OpenSslContext
* Correctly detect handshake failures as soon as possible
* Guard against segfault caused by multiple calls to destroyPools(). This can happen if OpenSslContext throws an exception in the constructor and the finalize() method is called later during GC

Result:

openssl can be used for client and servers now.
2014-12-22 19:37:48 +01:00
Norman Maurer
e266cfcf2b Efficiently handle writing ( wrap(...) ) of CompositeByteBuf when using SslHandler
Motivation:

SslHandler.wrap(...) does a poor job when handling CompositeByteBuf as it always call ByteBuf.nioBuffer() which will do a memory copy when a CompositeByteBuf is used that is backed by multiple ByteBuf.

Modifications:

- Use SslEngine.wrap(ByteBuffer[]...) to allow wrap CompositeByteBuf in an efficient manner
- Reduce object allocation in unwrapNonAppData(...)

Result:

Performance improvement when a CompositeByteBuf is written and the SslHandler is in the ChannelPipeline.
2014-12-22 12:14:14 +01:00
Norman Maurer
93237d435f CompositeByteBuf.nioBuffers(...) must not return an empty ByteBuffer array
Motivation:

CompositeByteBuf.nioBuffers(...) returns an empty ByteBuffer array if the specified length is 0. This is not consistent with other ByteBuf implementations which return an ByteBuffer array of size 1 with an empty ByteBuffer included.

Modifications:

Make CompositeByteBuf.nioBuffers(...) consistent with other ByteBuf implementations.

Result:

Consistent and correct behaviour of nioBufffers(...)
2014-12-22 11:17:53 +01:00
Norman Maurer
fa079baf29 Always return SliceByteBuf on slice(...) to eliminate possible leak
Motivation:

When calling slice(...) on a ByteBuf the returned ByteBuf should be the slice of a ByteBuf and shares it's reference count. This is important as it is perfect legal to use buf.slice(...).release() and have both, the slice and the original ByteBuf released. At the moment this is only the case if the requested slice size is > 0. This makes the behavior inconsistent and so may lead to a memory leak.

Modifications:

- Never return Unpooled.EMPTY_BUFFER when calling slice(...).
- Adding test case for buffer.slice(...).release() and buffer.duplicate(...).release()

Result:

Consistent behaviour and so no more leaks possible.
2014-12-22 11:15:28 +01:00
Norman Maurer
17d1fa093e Fix memory leak in OpenSslEngine
Motivation:

When a remote peer did open a connection and only do the handshake without sending any data and then directly close the connection we did not call shutdown() in the OpenSslEngine. This leads to a native memory leak. Beside this it also was not fireed when a OpenSslEngine was created but never used.

Modifications:

- Make sure shutdown() is called in all cases when closeInbound() is called
- Call shutdown() also in the finalize() method to ensure we release native memory when the OpenSslEngine is GC'ed

Result:

No more memory leak when using OpenSslEngine
2014-12-21 09:26:38 +01:00
Trustin Lee
28553c9ee0 Do not use SLF4J/Logback API directly
Motivation:

TrafficShapingHandlerTest uses Logback API directly, which is
discouraged.  Also, it overrides the global default log level, which
silences the DEBUG messages from other tests.

Modifications:

Remove the direct use of Logback API

Result:

The tests executed after TrafficShapingHandlerTest logs their DEBUG
messages correctly.
2014-12-17 10:19:48 +09:00
Scott Mitchell
5ff0b1253c Parent pom inconsistent between baselines
Motivation:
ALPN version updates revealed an inconsistency visible by defaulting to npn when alpn was expected.

Modifications:
Default to ALPN.

Result:
Build and unit tests should pass.
2014-12-16 19:27:51 -05:00
Scott Mitchell
2c0a85c6ec Java ALPN provider version update
Motivation:

There was a bug in the Java ALPN library we are using.  A new version was released to fix this bug and we should update our pom.xml to use the new version.

Modifications:

Update pom.xml to use new ALPN library.

Result:

Newer versions of JDK (1.7_u71, 1.7_u72, 1.8_u25) have the bug fixed.
2014-12-16 16:27:47 -05:00
Trustin Lee
99b9cda01d Fix checkstyle 2014-12-16 20:34:25 +09:00
Trustin Lee
9c4438e383 Log detailed information about renegotiation and traffic
Motivation:

We need more information to understand why SocketSslEchoTest fails
sporadically in the CI machine.

Modifications:

- Refactor SocketSslEchoTest so that it is easier to retrieve the
  information about renegotiation and the current progress

Result:

We will get more information when the test fails.
2014-12-16 17:46:29 +09:00
Trustin Lee
0baa5d5119 Compress the heap dump after tests are finished
Motivation:

Tests sometimes time out because it took too long to compress the
generated heap dump.

Modifications:

- Move the compression logic to a new method 'compressHeapDumps()'
- Call TestUtils.compressHeapDumps() at the end of the tests, so that
  the tests do not fail because of timeout

Result:

JUnit reports the real cause of the test failure instead of timeout
exception.
2014-12-16 16:16:29 +09:00
zcourts
2c08c4a553 ensure getRawQuery is not null before appending
Motivation:

without this check then given a URI with path /path the resulting URL will be /path?null=

Modifications:

check that getRawQuery doesn't return null and only append if not

Result:

urls of the form /path will not have a null?= appended
2014-12-16 06:58:01 +01:00
Trustin Lee
f86356f083 Generate non-test JAR for netty-testsuite
Motivation:

So far, we generated and deployed test JARs to Maven repositories. The
deployed JAR had the classifier 'test-jar'.  The test JAR is consumed by
transport-native-epoll as a test dependency.

The problem is, when netty-transport-native-epoll pulls the test JAR as
a dependency, that Maven resolves its transitive dependencies at
'compile' and 'runtime' scope only, which is incorrect.

I was bitten by this problem recently while trying to add a new
dependency to netty-testsuite.  Because I added a new dependency at the
'test' scope, the new dependency was not pulled transitively by
transport-native-epoll and caused an unexpected build failure.

- d6160208c3
- bf77bb4c3a

Modifications:

- Move all classes in netty-testsuite from src/test to src/main
- Update the 'compile' scope dependencies of netty-testsuite
- Override the test directory configuration properties of the surefire
  plugin
- Do not generate the test JAR anymore
- Update the dependency of netty-transport-native-epoll

Result:

It is less error-prone to add a new dependency to netty-testsuite.
2014-12-15 09:18:20 +09:00
Trustin Lee
80f788cea2 Fix build errors due to missing dependency 2014-12-14 21:30:57 +09:00
Trustin Lee
c718657cf2 Compress the heap dump generated by TestUtils.dump()
Motivation:

It takes too long to download the heap dump from the CI server.

Modifications:

Compress the heap dump as much as possible.

Result:

When heap dump is generated by certain test failure, the generated heap
dump file is about 3 times smaller than before, although the compression
time will increase the build time when the test fails.
2014-12-14 12:03:11 +09:00
ysammy
39820ef303 Fix documentation for ChannelHandlerContext#fireChannelReadComplete
Motivation:
Fix a minor documentation bug in
ChannelHandlerContext#fireChannelReadComplete.

Modifications:
ChannelHandlerContext#fireChannelReadComplete no longer references an
incorrect method in its javadoc.

Results:
Documentation is correct.
2014-12-12 18:43:27 +01:00
Norman Maurer
08684cb749 Remove bottleneck while create InetSocketAddress in native transport
Motivation:

Everytime a new connection is accepted via EpollSocketServerChannel it will create a new EpollSocketChannel that needs to get the remote and local addresses in the constructor. The current implementation uses new InetSocketAddress(String, int) to create these. This is quite slow due the implementation in oracle and openjdk.

Modifications:

Encode all needed informations into a byte array before return from jni layer and then use new InetSocketAddress(InetAddress, int) to create the socket addresses. This allows to create the InetAddress via a byte[] and so reduce the overhead, this is done either by using InetAddress.getByteAddress(byte[]) or by Inet6Address.getByteAddress(String, byte[], int).

Result:

Reduce performance overhead while accept new connections with native transport
2014-12-12 18:15:55 +01:00
Trustin Lee
d0e91e2f15 Add more assertions related with TLS renegotiation 2014-12-12 18:00:50 +09:00
Trustin Lee
9c4ba81b0b Test TLS renegotiation with explicit cipher suite change
Motivation:

So far, our TLS renegotiation test did not test changing cipher suite
during renegotiation explicitly.

Modifications:

- Switch the cipher suite during renegotiation

Result:

We are now sure the cipher suite change works.
2014-12-12 17:50:48 +09:00
Trustin Lee
5cb0ef6551 Add log messages when dump starts
.. to make it easier to find the right dump file for a test when there
are multiple dump files.
2014-12-12 11:54:14 +09:00
Trustin Lee
689d59b04b Make sure to notify handshake success even if SSLEngine is closed
Related:

e9685ea45a

Motivation:

SslHandler.unwrap() does not evaluate the handshake status of
SSLEngine.unwrap() when the status of SSLEngine.unwrap() is CLOSED.

It is not correct because the status does not reflect the state of the
handshake currently in progress, accoding to the API documentation of
SSLEngineResult.Status.

Also, sslCloseFuture can be notified earlier than handshake notification
because we call sslCloseFuture.trySuccess() before evaluating handshake
status.

Modifications:

- Notify sslCloseFuture after the unwrap loop is finished
- Add more assertions to SocketSslEchoTest

Result:

Potentially fix the regression caused by:
- e9685ea45a
2014-12-12 11:47:52 +09:00
Trustin Lee
7124ef88cb Generate heap and thread dump when some tests fail
Motivation:

We have a few sporadic test failures which are only easily reproduceable
in our CI machine.  To get more information about the failure, we need
heap and full thread dump at the moment of failure.

Modifications:

- Add TestUtils.dump() method to dump heap and threads
- Modify SocketGatheringWriteTest and SocketSslEchoTest to call
  TestUtils.dump() on failure

Result:

We get more information about the test failure.
2014-12-12 10:34:38 +09:00
Norman Maurer
a4450b76d9 Allow to lazy create a DefaultFileRegion from a File
Motivation:

We only provided a constructor in DefaultFileRegion that takes a FileChannel which means the File itself needs to get opened on construction. This has the problem that if you want to write a lot of Files very fast you may end up with may open FD's even if they are not needed yet. This can lead to hit the open FD limit of the OS.

Modifications:

Add a new constructor to DefaultFileRegion which allows to construct it from a File. The FileChannel will only be obtained when transferTo(...) is called or the DefaultFileRegion is explicit open'ed via open() (this is needed for the native epoll transport)

Result:

Less resource usage when writing a lot of DefaultFileRegion.
2014-12-11 12:01:52 +01:00
Norman Maurer
d62932c7de Ensure buffer is not released when call array() / memoryAddress()
Motivation:

Before we missed to check if a buffer was released before we return the backing byte array or memoryaddress. This could lead to JVM crashes when someone tried various bulk operations on the Unsafe*ByteBuf implementations.

Modifications:

Always check if the buffer is released before all to return the byte array and memoryaddress.

Result:

No more JVM crashes because of released buffers when doing bulk operations on Unsafe*ByteBuf implementations.
2014-12-11 11:30:10 +01:00
Trustin Lee
e9685ea45a Add SslHandler.renegotiate()
Related: #3125

Motivation:

We did not expose a way to initiate TLS renegotiation and to get
notified when the renegotiation is done.

Modifications:

- Add SslHandler.renegotiate() so that a user can initiate TLS
  renegotiation and get the future that's notified on completion
- Make SslHandler.handshakeFuture() return the future for the most
  recent handshake so that a user can get the future of the last
  renegotiation
- Add the test for renegotiation to SocketSslEchoTest

Result:

Both client-initiated and server-initiated renegotiations are now
supported properly.
2014-12-11 18:06:16 +09:00
Trustin Lee
b653491a9f Make SslHandler work when autoRead is turned off
Related: #2958

Motivation:

SslHandler currently does not issue a read() request when it is
handshaking. It makes a connection with autoRead off stall, because a
user's read() request can be used to read the handshake response which
is invisible to the user.

Modifications:

- SslHandler now issues a read() request when:
  - the current handshake is in progress and channelReadComplete() is
    invoked
  - the current handshake is complete and a user issued a read() request
    during handshake
- Rename flushedBeforeHandshakeDone to flushedBeforeHandshake for
  consistency with the new variable 'readDuringHandshake'

Result:

SslHandler should work regardless whether autoRead is on or off.
2014-12-11 17:58:49 +09:00
Trustin Lee
b8abe2d92e Trigger channelWritabilityChanged() later to avoid reentrance
Related: #3212

Motivation:

When SslHandler and ChunkedWriteHandler exists in a pipeline together,
it is possible that ChunkedWriteHandler.channelWritabilityChanged()
invokes SslHandler.flush() and vice versa. Because they can feed each
other (i.e. ChunkedWriteHandler.channelWritabilityChanged() ->
SslHandler.flush() -> ChunkedWriteHandler.channelWritabilityChanged() ->
..), they can fall into an inconsistent state due to reentrance (e.g.
bad MAC record at the remote peer due to incorrect ordering.)

Modifications:

- Trigger channelWritabilityChanged() using EventLoop.execute() when
  there's a chance where channelWritabilityChanged() can cause a
  reentrance issue
- Fix test failures caused by the modification

Result:

Fix the handler reentrance issues related with a
channelWritabilityChanged() event
2014-12-10 18:46:01 +09:00
Scott Mitchell
3c2b5c96fd Fix build issue from 5edb708
Motivation:
Commit 5edb708 introduced a build failure.

Modifications:
Add missing imports so build can complete.

Result:
Compilation error no more.
2014-12-09 13:29:37 -05:00
Trustin Lee
5edb7083b6 Call ctx.flush() at least once in ChunkedWriteHandler.flush()
Related: #3219

Motivation:

ChunkedWriteHandler.flush() does not call ctx.flush() when channel is
not writable. This can be a problem when other handler / non-Netty
thread writes messages simultaneously, because
ChunkedWriteHandler.flush() might have no chance to observe
channel.isWritable() returns true and thus the channel is never flushed.

Modifications:

- Ensure that ChunkedWriteHandler.flush() calls ctx.flush() at least
  once.

Result:

A stall connection issue, that occurs when certain combination of
handlers exist in a pipeline, has been fixed. (e.g. SslHandler and
ChunkedWriteHandler)
2014-12-09 18:17:56 +09:00
Daniel Bevenius
a8cee4d649 Fixing minor typo in FastThreadLocal javadoc. 2014-12-08 14:14:45 +01:00
Frederic Bregier
4871630d48 Fix AbstractDiskHttpData int conversion from long
Motivations:
The chunkSize might be oversized after comparison (size being > of int
capacity) if file size is bigger than an integer.

Modifications:
Change it to long.

Result:
There is no more int oversized.

Same fix for 4.1 and Master
2014-12-08 06:27:13 +01:00
Trustin Lee
1e35d06efb Make PendingWriteQueue.recycle() update its state before triggering an event
Related: #3212

Motivation:

PendingWriteQueue.recycle() updates its data structure after triggering
a channelWritabilityChanged() event. It causes a rare corruption such as
double free when channelWritabilityChanged() method accesses the
PendingWriteQueue.

Modifications:

Update the state of PendingWriteQueue before triggering an event.

Result:

Fix a rare double-free problem
2014-12-07 23:28:18 +09:00
Trustin Lee
1122189771 Trigger exceptionCaught() when VoidChannelPromise fails
Related: #3190

Motivation:

When an outbound handler method raises an exception, its promise is
marked as failed.  If the promise is done already, the exception is
logged.

When the promise is void, exceptionCaught() must be triggered to notify
a user. However, AbstractChannelHandlerContext simply swallows it.

Modifications:

Do not swallow an exception when the promise is void.

Result:

A user who uses a void promise for an outbound operation will be
notified on failure.
2014-12-07 16:00:35 +09:00
Trustin Lee
2fadef31ef Fire channelRead() event immediately in OIO message channels
Related: #3189

Motivation:

OIO transport implementations block for at most 1 second to wait for
additional messages (or accepted connections).

However, because AbstractOioMessageChannel defers the channelRead()
events for the messages read so far until there's nothing to read up to
maxMessagesPerRead, any read operation will be followed by a 1-second
delay.

Modifications:

Fire channelRead() events as soon as doRead() returns so that there is
no 1 second delay between the actual read and the channelRead() event.

Result:

No more weird 1-second delay
2014-12-07 12:13:33 +09:00
Trustin Lee
a9fda3c8e0 Fix a bug where Recycler's capacity can increase beyond its maximum
Related: #3166

Motivation:

When the recyclable object created at one thread is returned at the
other thread, it is stored in a WeakOrderedQueue.

The objects stored in the WeakOrderedQueue is added back to the stack by
WeakOrderedQueue.transfer() when the owner thread ran out of recyclable
objects.

However, WeakOrderedQueue.transfer() does not have any mechanism that
prevents the stack from growing beyond its maximum capacity.

Modifications:

- Make WeakOrderedQueue.transfer() increase the capacity of the stack
  only up to its maximum
- Add tests for the cases where the recyclable object is returned at the
  non-owner thread
- Fix a bug where Stack.scavengeSome() does not scavenge the objects
  when it's the first time it ran out of objects and thus its cursor is
  null.
- Overall clean-up of scavengeSome() and transfer()

Result:

The capacity of Stack never increases beyond its maximum.
2014-12-06 17:56:10 +09:00
Greg Gibeling
66834bc818 Lazily check for root, avoids unnecessary errors & resources
Motivation:

io.netty.util.internal.PlatformDependent.isRoot() depends on the IS_ROOT field which is filled in during class initialization. This spawns processes and consumes resources, which are not generally necessary to the complete functioning of that class.

Modifications:

This switches the class to use lazy initialization this field inside of the isRoot() method using double-checked locking (http://en.wikipedia.org/wiki/Double-checked_locking).

Result:

The first call to isRoot() will be slightly slower, at a tradeoff that class loading is faster, uses fewer resources and platform errors are avoided unless necessary.
2014-12-05 09:16:26 +01:00
Trustin Lee
c774b65f86 Fix a race condition where handler is removed before unregistration
Related: #3156

Motivation:

Let's say we have a channel with the following pipeline configuration:

  HEAD --> [E1] H1 --> [E2] H2 --> TAIL

when the channel is deregistered, the channelUnregistered() methods of
H1 and H2 will be invoked from the executor thread of E1 and E2
respectively. To ensure that the channelUnregistered() methods are
invoked from the correct thread, new one-time tasks will be created
accordingly and be scheduled via Executor.execute(Runnable).

As soon as the one-time tasks are scheduled,
DefaultChannelPipeline.fireChannelUnregistered() will start to remove
all handlers from the pipeline via teardownAll(). This process is
performed in reversed order of event propagation. i.e. H2 is removed
first, and then H1 is removed.

If the channelUnregistered() event has been passed to H2 before H2 is
removed, a user does not see any problem.

If H2 has been removed before channelUnregistered() event is passed to
H2, a user will often see the following confusing warning message:

  An exceptionCaught() event was fired, and it reached at the tail of
  the pipeline. It usually means the last handler in the pipeline did
  not handle the exception.

Modifications:

To ensure that the handlers are removed *after* all events are
propagated, traverse the pipeline in ascending order before performing
the actual removal.

Result:

A user does not get the confusing warning message anymore.
2014-12-05 15:51:40 +09:00
Trustin Lee
53c1a30194 Add missing @Override annotation 2014-12-04 20:53:22 +09:00
Trustin Lee
b62a6db61e Fix checkstyle 2014-12-04 18:40:36 +09:00
Trustin Lee
0f8ccbb1ac Overall clean-up of the initial SniHandler/DomainNameMapping work
- Parameterize DomainNameMapping to make it useful for other use cases
  than just mapping to SslContext
- Move DomainNameMapping to io.netty.util
- Clean-up the API documentation
- Make SniHandler.hostname and sslContext volatile because they can be
  accessed by non-I/O threads
2014-12-04 18:23:24 +09:00
Trustin Lee
7d8873a490 Fix dependency issues with hamcrest
Motivation:

We use 3 (!) libraries to build mock objects - easymock, mockito, jmock.
Mockito and jMock pulls in the different versions of Hamcrest, and it
conflicts with the version pulled by jUnit.

Modifications:

- Replace mockito-all with mockito-core to avoid pulling in outdated
  jUnit and Hamcrest
- Exclude junit-dep when pulling in jmock-junit4, because it pulls an
  outdated Hamcrest version
- Pull in the hamcrest-library version used by jUnit explicitly

Result:

No more dependency hell that results in NoSuchMethodError during the
tests
2014-12-04 18:00:02 +09:00