Commit Graph

757 Commits

Author SHA1 Message Date
Jason Tedor
e44c562932 Mark initialization of unsafe as privileged
Motiviation:

Preparing platform dependent code for using unsafe requires executing
privileged code. The privileged code for initializing unsafe is executed
in a manner that would require all code leading up to the initialization
to have the requisite permissions. Yet, in a restrictive environment
(e.g., under a security policy that only grants the requisite
permissions the Netty common jar but not to application code triggering
the Netty initialization), then initializing unsafe will not succeed
even if the security policy would otherwise permit it.

Modifications:

This commit marks the necessary blocks as privileged. This enables
access to the necessary resources for initialization unsafe. The idea is
that we are saying the Netty code is trusted, and as long as the Netty
code has been granted the necessary permissions, then we will allow the
caller access to these resources even though the caller itself might not
have the requisite permissions.

Result:

Unsafe can be initialized in a restrictive security environment.
2016-08-08 19:19:09 +02:00
Norman Maurer
54e41df65d Ensure people are aware recycler capacity is per thread.
Motivation:

Its not clear that the capacity is per thread.

Modifications:

Rename system property to make it more clear that the recycler capacity is per thread.

Result:

Less confusing.
2016-08-08 11:00:26 +02:00
Norman Maurer
d44017189e Remove extra conditional check in retain
Motivation:

We not need to do an extra conditional check in retain(...) as we can just check for overflow after we did the increment.

Modifications:

- Remove extra conditional check
- Add test code.

Result:

One conditional check less.
2016-08-05 13:09:26 +02:00
Norman Maurer
aa6e6ae307 [#4241] Ensure NioEventLoopGroup.shutdownGracefully(...) with no quiet period shutdown as fast as expected.
Motivation:

If the user uses 0 as quiet period we should shutdown without any delay if possible.

Modifications:

Ensure we not introduce extra delay when a shutdown quit period of 0 is used.

Result:

EventLoop shutdown as fast as expected.
2016-08-05 07:21:17 +02:00
Dmitriy Dumanskiy
c6a13e28b9 Improvement : constant pool now less concurrent
Current constant pool holds all data within HashMap and all access to this HashMap is done via synchronized blocks. Thus CuncurrentHashMap will be here more efficient as it designed for higher throughput and will use less locks. Also valueOf method was not very efficient as it performed get operation 2 times.

Modifications :

HashMap -> PlatformDependent.newConcurrentHashMap().
ValueOf is more efficient now, threadsafe and uses less locks. Downside is that final T tempConstant = newConstant(nextId(), name); could be called more than 1 time during high contention.

Result :

Less contention, cleaner code.
2016-08-04 08:22:37 +02:00
Norman Maurer
fc14ca31cb Add NonStickyEventExecutorGroup
Motivation:

We offer DefaultEventExecutorGroup as an EventExecutorGroup which return OrderedEventExecutor and so provide strict ordering of event execution. One limitations of this implementation is that each contained DefaultEventExecutor will always be tied to a single thread, which can lead to a very unbalanced execution as one thread may be super busy while others are idling.

Modifications:

- Add NonStickyEventExecutorGroup which can be used to wrap another EventExecutorGroup (like UnorderedThreadPoolEventExecutor) and expose ordering while not be sticky with the thread that is used for a given EventExecutor. This basically means that Threads may change between execution of tasks for an EventExecutor but ordering is still guaranteed.

Result:

Better utalization of threads in some use-cases.
2016-08-04 06:30:59 +02:00
Norman Maurer
d3dc9c9e74 Allow to limit the maximum number of WeakOrderQueue instances per Thread.
Motivation:

To better restrict resource usage we should limit the number of WeakOrderQueue instances per Thread. Once this limit is reached object that are recycled from a different Thread then the allocation Thread are dropped on the floor.

Modifications:

Add new system property io.netty.recycler.maxDelayedQueuesPerThread and constructor that allows to limit the max number of WeakOrderQueue instances per Thread for Recycler instance. The default is 2 * cores (the same as the default number of EventLoop instances per EventLoopGroup).

Result:

Better way to restrict resource / memory usage per Recycler instance.
2016-08-04 06:23:14 +02:00
Dmitriy Dumanskiy
c13908adb5 deprecated old loggers
Motivation:

Commons logger is dead and not updated for more than 2 years. #5615.

Modifications:

Added @Deprecated annotation to CommonsLoggerFactory and CommonsLogger.

Result:

Commons logger now deprecated.
2016-08-03 23:10:09 +02:00
Jason Tedor
0b086a9625 Do not log on explicit no unsafe
Motivation:

When Netty components are initialized, Netty attempts to determine if it
has access to unsafe. If Netty is not able to access unsafe (because of
security permissions, or because the JVM was started with an explicit
flag to tell Netty to not look for unsafe), Netty logs an info-level
message that looks like a warning:

Your platform does not provide complete low-level API for accessing
direct buffers reliably. Unless explicitly requested, heap buffer will
always be preferred to avoid potential system unstability.

This log message can appear in applications that depend on Netty for
networking, and this log message can be scary to end-users of such
platforms. This log message should not be emitted if the application was
started with an explicit flag telling Netty to not look for unsafe.

Modifications:

This commit refactors the unsafe detection logic to expose whether or
not the JVM was started with a flag telling Netty to not look for
unsafe. With this exposed information, the log message on unsafe being
unavailable can be modified to not be emitted when Netty is explicitly
told to not look for unsafe.

Result:

No log message is produced when unsafe is unavailable because Netty was
told to not look for it.
2016-08-03 22:15:40 +02:00
Dmitriy Dumanskiy
a06afe8b77 Improvement: simplified AbstractConstant compareTo.
Motivation:

AbstractConstant.compareTo seems complex and hard to understand. Also it allocates unnecessary 1 byte in direct buffer and holds unnecessary pointer to this byte butter.

Modifications:

uniquifier (id) variable now initialized during Constant creation and thus no need in volatile and no need in uniquifier() method as it could be easily replaced with AtomicLong.

Result:

Every Constant instance now consumes less bytes for pointer, don't consume anything in direct buffer.
2016-08-03 09:53:49 +02:00
Dmitriy Dumanskiy
f769bb3376 Cleanup : removed unused empty arrays and simplified initialization 2016-08-02 07:03:59 +02:00
Dmitriy Dumanskiy
b427a8c8bd Cleanup : outdated code removed and unnecessary static section and variables
Motivation:

Old code doesn't needed anymore due to logger factory initialization.

Modifications :

Removed static section and useless static variables;
Logging concatenations replaced with placeholders.

Result:

Cleaner, simpler code doing the same
2016-08-02 07:01:18 +02:00
Scott Mitchell
82b22d6f11 findNextPositivePowerOfTwo out of bounds
Motivation:
Some usages of findNextPositivePowerOfTwo assume that bounds checking is taken care of by this method. However bounds checking is not taken care of by findNextPositivePowerOfTwo and instead assert statements are used to imply the caller has checked the bounds. This can lead to unexpected non power of 2 return values if the caller is not careful and thus invalidate any logic which depends upon a power of 2.

Modifications:
- Add a safeFindNextPositivePowerOfTwo method which will do runtime bounds checks and always return a power of 2

Result:
Fixes https://github.com/netty/netty/issues/5601
2016-08-01 19:52:13 -07:00
Dmitriy Dumanskiy
a80ea46b8e Removed custom split method as it is not effective anymore. 2016-08-01 21:49:33 +02:00
Dmitriy Dumanskiy
1975fcefe4 StringUtil cleanup. NewLine char initializing simplified and code in static section simplified.
Motivation:

NewLine initializing is complex, with unnecessary allocations and non-standard.
Static section is overloaded with StringBuilders for simple "s" + "s" concatenation pattern that compiler optimizes perfectly.

Modifications:

NewLine initializing replaced with standard System.getProperty("line.separator").
Removed StringBuilders in static section.

Result:

Less complex code.
2016-08-01 07:12:58 +02:00
Norman Maurer
f585806a74 [#5598] Ensure SslHandler not log false-positives when try to close the channel due timeout.
Motivation:

When we try to close the Channel due a timeout we need to ensure we not log if the notification of the promise fails as it may be completed in the meantime.

Modifications:

Add another constructor to ChannelPromiseNotifier and PromiseNotifier which allows to log on notification failure.

Result:

No more miss-leading logs.
2016-07-30 21:15:09 +02:00
Norman Maurer
d92c5f5f5b Introduce allocation / pooling ratio in Recycler
Motivation:

At the moment the Recyler is very sensitive to allocation bursts which means that if there is a need for X objects for only one time these will most likely end up in the Recycler and sit there forever as the normal workload only need a subset of this number.

Modifications:

Add a ratio which sets how many objects should be pooled for each new allocation. This allows to slowly increase the number of objects in the Recycler while not be to sensitive for bursts.

Result:

Less unused objects in the Recycler if allocation rate sometimes bursts.
2016-07-29 15:20:39 +02:00
Norman Maurer
7f8b5f8efd [#4351] Add warnings for Attribute.remove() and Attribute.getAndRemove()
Motivation:

Using Attribute.remove() and Attribute.getAndRemove() in a multi-threaded enviroment has its drawbacks. Make sure we document these.

Modifications:

Add javadocs and mark Attribute.remove() and Attribute.getAndRemove() as @Deprecated.

Result:

Hopefully less suprising behaviour.
2016-07-29 15:12:36 +02:00
Norman Maurer
cb7cf4491c [maven-release-plugin] prepare for next development iteration 2016-07-27 13:29:56 +02:00
Norman Maurer
9466b32d05 [maven-release-plugin] prepare release netty-4.1.4.Final 2016-07-27 13:16:59 +02:00
Norman Maurer
445a547265 Set Recycler DEFAULT_INITIAL_MAX_CAPACITY to a more sane value
Motivation:

We used a very high number for DEFAULT_INITIAL_MAX_CAPACITY (over 200k) which is not very relastic and my lead to very surprising memory usage if allocations happen in bursts.

Modifications:

Use a more sane default value of 32k

Result:

Less possible memory usage by default
2016-07-27 07:59:23 +02:00
Scott Mitchell
01523e7835 Reduce conditionals in AbstractReferenceCounted
Motivation:
AbstractReferenceCounted as independent conditional statements to check the bounds of the retain IllegalReferenceCountException condition. One of the exceptions also uses the incorrect increment.

Modifications:
- Combined independent conditional checks into 1 where possible
- Correct IllegalReferenceCountException with incorrect increment
- Remove the subtract to check for overflow and re-use the addition and check for overflow to remove 1 arithmetic operation (see http://docs.oracle.com/javase/specs/jls/se7/html/jls-15.html#jls-15.18.2)

Result:
AbstractReferenceCounted has less independent branch statements and more correct IllegalReferenceCountException. Compilation size of AbstractReferenceCounted.retain() is reduced from 58 bytes to 47 bytes.
2016-07-25 12:25:55 -07:00
Norman Maurer
d315f1b3ba [#5551] Fix sporadic GlobalEventExecutorTest.testAutomaticStartStop test failure
Motivation:

We saw some sporadic test failures for GlobalEventExecutorTest.testAutomaticStartStop test. This is caused parallel execution of tests in combination with assert checks that will be affected.

Modifications:

Remove fragile assert checks.

Result:

No more sporadic test failures
2016-07-25 08:26:30 +02:00
Norman Maurer
fe4af7e32c Ensure shared capacity is updated correctly when WeakOrderQueue is collected.
Motivation:

We use a shared capacity per Stack for all its WeakOrderQueue elements. These relations are stored in a WeakHashMap to allow dropping these if memory pressure arise. The problem is that we not "reclaim" previous reserved space when this happens. This can lead to a Stack which has not shared capacity left which then will lead to an AssertError when we try to allocate a new WeakOderQueue.

Modifications:

- Ensure we never throw an AssertError if we not have enough space left for a new WeakOrderQueue
- Ensure we reclaim space when WeakOrderQueue is collected.

Result:

No more AssertError possible when new WeakOrderQueue is created and also correctly reclaim space that was reserved from the shared capacity.
2016-07-24 20:56:51 +02:00
Norman Maurer
9c0d1a99bc Ensure attributes and contained object can be collected as fast as possible.
Motivation:

Due an implementation flaw in DefaultAttributeMap it was possible that an attribute and its stored value/key could not be collected until the DefaultAttributeMap could be collected. This can lead to unexpected memory usage and strong reachability of objects that should be collected.

Modifications:

Use an special empty DefaultAttribute as head of the each bucket which will not store any key / value. With this change everything can be collected as expected as we not use any DefaultAttribute created by the user as head of a bucket.

Result:

DefaultAttributeMap does not store user data and thus the lifetime of this user data is not tied to the lifetime of the DefaultAttributeMap.
2016-07-24 20:31:39 +02:00
Norman Maurer
94d7557dea Ensure WeakOrderQueue can be collected fast enough
Motivation:

Commit afafadd3d7 introduced a change which stored the Stack in the WeakOrderQueue as field. This unfortunally had the effect that it was not removed from the WeakHashMap anymore as the Stack also is used as key.

Modifications:

Do not store a reference to the Stack in WeakOrderQueue.

Result:

WeakOrderQueue can be collected correctly again.
2016-07-22 20:42:05 +02:00
alexlehm
73c0fb0e23 Construct LOCALHOST4 and LOCALHOST6 object with hostname "localhost"
Motivation:

When resolving localhost on Windows where the hosts file does not contain a localhost entry by default, the resulting InetAddress object returned by the resolver does not have the hostname set so that getHostName returns the ip address 127.0.0.1. This behaviour is inconsistent with Windows where the hosts file does contain a localhost entry and with Linux in any case. It breaks at least some unit tests.

Modifications:

Create the LOCALHOST4 and LOCALHOST6 objects with hostname localhost in addition to the address.
Add unit test domain localhost to DnsNameResolverTest to check the resolution of localhost with ipv4 at least.

Result:

The resolver returns a InetAddress object for localhost with the hostname localhost in all cases.
2016-07-20 05:55:45 +02:00
Jason Tedor
e00b797936 Acquire Java version simply
Motivation:

The Java version is used for platform dependent logic. Yet, the logic
for acquiring the Java version requires special permissions (the runtime
permission "getClassLoader") that some downstream projects will never
grant. As such, these projects are doomed to have Netty act is their
Java major version is six.  While there are ways to maintain the same
logic without requiring these special permissions, the logic is
needlessly complicated because it relies on loading classes that exist
in version n but not version n - 1. This complexity can be removed. As a
bonanza, the dangerous permission is no longer required.

Modifications:

Rather than attempting to load classes that exist in version n but not
in version n - 1, we can just parse the Java specification version. This
only requires a begign property (property permission
"java.specification.version") and is simple.

Result:

Acquisition of the Java version is safe and simple.
2016-07-19 18:51:25 +02:00
Norman Maurer
047f6aed28 [maven-release-plugin] prepare for next development iteration 2016-07-15 09:09:13 +02:00
Norman Maurer
b2adea87a0 [maven-release-plugin] prepare release netty-4.1.3.Final 2016-07-15 09:08:53 +02:00
Carsten Varming
3a33f5eb9d Fix JDK9 direct ByteBuffer cleaner invocation and initialize Cleaner0 when PlatformDependent0 is initialized.
Motivation:
The clean method in java.base/jdk.internal.ref.Cleaner is not accessible
to methods outside java.base.  This prevents Cleaner0.freeDirectBuffer
from actually calling the clean method on JDK9.

The issue could have been caught earlier if Cleaner0 is initialized when
PlatformDependent0 is initialized and logging statements in the static
initializer in Cleaner0 would be close to the logging statements in the
static initializer in PlatformDependent0.

Modifications:
Try casting the cleaner obtained from a ByteBuffer to Runnable and use
Runnable.run if possible. All Cleaners in JDK9 implements Runnable. Fall
back to the clean method if the cleaner does not implement Runnable.
The fallback preserves the behavior on JDK8 and earlier.

Try to free the direct ByteBuffer allocated during static initialization
of PlatformDependent0. This cause Cleaner0 to be initialized when
PlatformDependent0 is initialized, and logging statements from the
static initializers will be close together.

Result:

Cleaner0.freeDirectBuffer works as intended on JDK9 and logging shows
that Cleaner0.freeDirectBuffer works as intended.
2016-07-14 22:24:02 +02:00
Jason Tedor
27520f5208 Non-sticky thread groups in DefaultThreadFactory
Motivation:

A recent change to DefaultThreadFactory modified it so that it is sticky
with respect to thread groups. In particular, this change made it so
that DefaultThreadFactory would hold on to the thread group that created
it, and then use that thread group to create threads.

This can have problematic semantics since it can lead to violations of a
tenet of thread groups that a thread can only modify threads in its own
thread group and descendant thread groups. With a sticky thread group, a
thread triggering the creation of a new thread via
DefaultThreadFactory#newThread will be modifying a thread from the
sticky thread group which will not necessarily be its own nor a
descendant thread group. When a security manager is in place that
enforces this requirement, these modifications are now impossible. This
is especially problematic in the context of Netty because certain global
singletons like GlobalEventExecutor will create a
DefaultThreadFactory. If all DefaultThreadFactory instances are sticky
about their thread groups, it means that submitting tasks to the
GlobalEventExecutor singleton can cause a thread to be created from the
DefaultThreadFactory sticky thread group, exactly the problem with
DefaultThreadFactory being sticky about thread groups. A similar problem
arises from the ThreadDeathWatcher.

Modifications:

This commit modifies DefaultThreadFactory so that a null thread group
can be set with the behavior that all threads created by such an
instance will inherit the default thread group (the thread group
provided by the security manager if there is one, otherwise the thread
group of the creating thread). The construction of the instances of
DefaultThreadFactory used by the GlobalEventExecutor singleton and
ThreadDeathWatcher are modified to use this behavior. Additionally, we
also modify the chained constructor invocations of the
DefaultThreadFactory that do not have a parameter to specify a thread
group to use the thread group from the security manager is available,
otherwise the creating thread's thread group. We also add unit tests
ensuring that all of this behavior is maintained.

Result:

It will be possible to have DefaultThreadFactory instances that are not
sticky about the thread group that led to their creation. Instead,
threads created by such a DefaultThreadFactory will inherit the default
thread group which will either be the thread group from the security
manager or the current thread's thread group.
2016-07-14 22:06:40 +02:00
Norman Maurer
afafadd3d7 [#5505] Enforce Recycler limit when recycling from different threads
Motivation:

Currently, the recycler max capacity it's only enforced on the
thread-local stack which is used when the recycling happens on the
same thread that requested the object.

When the recycling happens in a different thread, then the objects
will be queued into a linked list (where each node holds N objects,
default=16). These objects are then transfered into the stack when
new objects are requested and the stack is empty.

The problem is that the queue doesn't have a max capacity and that
can lead to bad scenarios. Eg:

- Allocate 1M object from recycler
- Recycle all of them from different thread
- Recycler WeakOrderQueue will contain 1M objects
- Reference graph will be very long to traverse and GC timeseems to be negatively impacted
- Size of the queue will never shrink after this

Modifications:

Add some shared counter which is used to manage capacity limits when recycle from different thread then the allocation thread. We modify the counter whenever we allocate a new Link to reduce the overhead of increment / decrement it.

Result:

More predictable number of objects mantained in the recycler pool.
2016-07-14 07:56:03 +02:00
Nitesh Kant
77770374fb Ability to run a task at the end of an eventloop iteration.
Motivation:

This change is part of the change done in PR #5395 to provide an `AUTO_FLUSH` capability.
Splitting this change will enable to try other ways of implementing `AUTO_FLUSH`.

Modifications:



Two methods:

```java
void executeAfterEventLoopIteration(Runnable task);


boolean removeAfterEventLoopIterationTask(Runnable task);
```
are added to `SingleThreadEventLoop` class for adding/removing a task to be executed at the end of current/next iteration of this `eventloop`.

In order to support the above, a few methods are added to `SingleThreadEventExecutor`

```java
protected void afterRunningAllTasks() { }
```

This is invoked after all tasks are run for this executor OR if the passed timeout value for `runAllTasks(long timeoutNanos)` is expired.

Added a queue of `tailTasks` to `SingleThreadEventLoop` to hold all tasks to be executed at the end of every iteration.


Result:



`SingleThreadEventLoop` now has the ability to execute tasks at the end of an eventloop iteration.
2016-07-12 10:22:15 +02:00
Jason Tedor
cfd6db7915 Avoid missed signals on a default promise
Motivation:

Today when awaiting uninterruptibly on a default promise, a race
condition can lead to a missed signal. Quite simply, the check for
whether the condition holds is not made inside a lock before
waiting. This means that the waiting thread can enter the wait after the
promise has completed and will thus not be notified, thus missing the
signal. This leads to the waiting thread to enter a timed wait that will
only trip with the timeout elapses leading to unnecessarily long waits
(imagine a connection timeout, and the waiting thread missed the signal
that the connection is ready).

Modification:

This commit fixes this missed signal by checking the condition inside a
lock. We also add a test that reliably fails without the non-racy
condition check.

Result:

Timed uninterruptible waits on default promise will not race against the
condition and possibly wait longer than necessary.
2016-07-12 09:57:14 +02:00
Norman Maurer
ce95c50444 [#5507] SingleThreadEventExecutor should reject call invoke*() from within the EventLoop.
Motivation:

ExecutorService.invoke*(...) methods may block by API definition. This can lead to deadlocks if called from inside the EventLoop in SingleThreadEventExecutor as it only has one Thread that does all the work.

Modifications:

Throw a RejectedExectionException if someone tries to call SingleThreadEventExecutor.invoke*(...) while in the EventLoop.

Result:

No more deadlock possible.
2016-07-09 08:08:50 +02:00
Julien Viet
79c8ec4d33 DnsNameResolver search domains support
Motivation:

The current DnsNameResolver does not support search domains resolution. Search domains resolution is supported out of the box by the java.net resolver, making the DnsNameResolver not able to be a drop in replacement for io.netty.resolver.DefaultNameResolver.

Modifications:

The DnsNameResolverContext resolution has been modified to resolve a list of search path first when it is configured so. The resolve method now uses the following algorithm:

if (hostname is absolute (start with dot) || no search domains) {
 searchAsIs
} else {
  if (numDots(name) >= ndots) {
    searchAsIs
  }
  if (searchAsIs wasn't performed or failed) {
    searchWithSearchDomainsSequenciallyUntilOneSucceeds
  }
}

The DnsNameResolverBuilder provides configuration for the search domains and the ndots value. The default search domains value is configured with the OS search domains using the same native configuration the java.net resolver uses.

Result:

The DnsNameResolver performs search domains resolution when they are present.
2016-07-08 22:04:01 +02:00
Scott Mitchell
4baff691b4 DefaultPromise make listeners not volatile
Motivation:
DefaultPromise has a listeners member variable which is volatile to allow for an optimization which makes notification of listeners less expensive when there are no listeners to notify. However this change makes all other operations involving the listeners member variable more costly. This optimization which requires listeners to be volatile can be removed to avoid volatile writes/reads for every access on the listeners member variable.

Modifications:
- DefaultPromise listeners is made non-volatile and the null check optimization is removed

Result:
DefaultPromise.listeners is no longer volatile.
2016-07-07 12:53:03 -07:00
Norman Maurer
29fdb160f3 [#5486] Not operate on serial execution assumption when using EventExecutor in the DefaultChannelPipeline.
Motivation:

In commit f984870ccc I made a change which operated under invalide assumption that tasks executed by an EventExecutor will always be processed in a serial fashion. This is true for SingleThreadEventExecutor sub-classes but not part of the EventExecutor interface contract.

Because of this change implementations of EventExecutor which not strictly execute tasks in a serial fashion may miss events before handlerAdded(...) is called. This is strictly speaking not correct as there is not guarantee in this case that handlerAdded(...) will be called as first task (as there is no ordering guarentee).

Cassandra itself ships such an EventExecutor implementation which has no strict ordering to spread load across multiple threads.

Modifications:

- Add new OrderedEventExecutor interface and let SingleThreadEventExecutor / EventLoop implement / extend it.
- Only expose "restriction" of skipping events until handlerAdded(...) is called for OrderedEventExecutor implementations
- Add ThreadPoolEventExecutor implementation which executes tasks in an unordered fashion. This is used in added unit test but can also be used for protocols which not expose an strict ordering.
- Add unit test.

Result:

Resurrect the possibility to implement an EventExecutor which does not enforce serial execution of events and be able to use it with the DefaultChannelPipeline.
2016-07-07 15:01:56 +02:00
Norman Maurer
6492cb98b2 Revert "DefaultPromise make listeners not volatile"
This reverts commit 4d8132ff24 as I missed something I want to discuss first.
2016-07-07 08:37:41 +02:00
Scott Mitchell
4d8132ff24 DefaultPromise make listeners not volatile
Motivation:
DefaultPromise has a listeners member variable which is volatile to allow for an optimization which makes notification of listeners less expensive when there are no listeners to notify. However this change makes all other operations involving the listeners member variable more costly. This optimization which requires listeners to be volatile can be removed to avoid volatile writes/reads for every access on the listeners member variable.

Modifications:
- DefaultPromise listeners is made non-volatile and the null check optimization is removed

Result:
DefaultPromise.listeners is no longer volatile.
2016-07-07 08:01:25 +02:00
Jason Tedor
d97129b4c0 Log listener Throwables in default promise
Motivation:

The logging statements in i.n.u.c.DefaultPromise do not emit the
caught Throwable when a Throwable is thrown while a listener is being
notified of completed or progressed operations.

Modifications:

This issue arises because the logging message has a single placeholder
but is passing two additional arguments, the second one being the
caught Throwable that is thus quietly not logged. We address this by
modifying the logging statements to ensure the caught Throwable is
logged. In this case, the preferred approach is to use the logger
override that accepts a message and a Throwable parameter since logger
implementations might have special handling for this case.

Result:

Log messages from i.n.u.c.DefaultPromise when a Throwable is thrown
while notifying a listener of completed or progressed operations will
contain the caught Throwable.
2016-07-06 08:52:19 +02:00
buchgr
b0a5d4c266 Fix improper synchronization in DefaultPromise. Fixes #5489
Motivation:

A race detector found that DefaultPromise.listeners is improperly synchronized [1].
Worst case a listener will not be executed when the promise is completed.

Modifications:

Make DefaultPromise.listeners a volatile.

Result:

Hopefully, DefaultPromise is more correct under concurrent execution.

[1] https://github.com/grpc/grpc-java/issues/2015
2016-07-04 19:00:45 +02:00
墨睿
be3e6972a1 Add a test case to check sub strings' AsciiString hash code
Motivation:

AsciiString.hashCode(o) , if "o" is a subString, the hash code is not always same, when netty’s version is 4.1.1.Final and jdk’s version is 1.6.

Modifications:

Use a test to assert hash codes are equal between a new string and any sub string (a part of  a char array),If their values are equal.

Result:

Create a test method to AsciiStringCharacterTest.
2016-07-04 07:19:52 +02:00
Tim Brooks
181c159c24 Remove unneeded calls to hasScheduledTasks() when fetching from scheduled task queue for event executors.
Motivation:

Currently in the single threaded and global event executors when the scheduled task queue is drained, there is a call to hasScheduledTasks(). If there are scheduled tasks then the the code polls the queue for tasks. The poll method duplicates the exact logic of hasScheduledTasks(). This involves two calls to nanoTime when one seems sufficient.

Modifications:

Directly poll the queue for tasks and break if the task returned is null.

Result:

Should be no noticeable impact on functionality. Two calls to nanoTime have been coarsened into a single call.
2016-07-01 17:16:58 +02:00
Norman Maurer
4676a2271c [maven-release-plugin] prepare for next development iteration 2016-07-01 10:33:32 +02:00
Norman Maurer
ad270c02b9 [maven-release-plugin] prepare release netty-4.1.2.Final 2016-07-01 09:07:40 +02:00
Carsten Varming
34d8b514d7 Use reflection to call cleaner on direct byte buffers in JDK9.
Motivation:

Project Jigsaw in JDK9 has moved the direct byte buffer cleaner from
sun.misc.Cleaner to java.lang.ref.Cleaner$Cleanable. This cause the
current platform tests to throw a ClassNotFoundException, disabling the
use of direct byte buffer cleaners.

Modifications:

I use reflection to find the clean method in either sun.misc.Cleaner or
java.lang.ref.Cleaner$Cleanable.

Result:

Netty uses direct byte buffers on JDK9 as it already do on earlier JDKs.
2016-06-30 18:48:36 +02:00
Carsten Varming
8780062a43 Removed HeapByteBuffer address field check.
Motivation:

In JDK9 heap byte buffers have an address field, so we have to remove
the current check as it is invalid in JDK9.

Modifications:

Removed the address field check for heap byte buffers.

Result:
Netty continues to find sun.misc.Unsafe in JDK9 as in previous JDKs.
2016-06-30 18:47:10 +02:00
Carsten Varming
9d933091bf Add version check for JDK9 and beyond.
Motivation:

Netty's platform dependent parts should know about JDK9.

Modifications:

JDK9 introduce Runtime$Version Runtime.version() which has an int major()
method that always return the major Java version. I call that method to
get the Java major version.

Result:

Netty will recognize all future JDK versions.
2016-06-30 18:45:35 +02:00