Motivation:
AdaptiveRecvByteBufAllocator currently adjusts the ByteBuf allocation size guess when readComplete is called. However the default configuration for number of reads before readComplete is called is 16. This means that there will be 16 reads done before any adjustment is done. If there is a large amount of data pending AdaptiveRecvByteBufAllocator will be slow to adjust the allocation size guess. In addition to being slow the result of only updating the guess in readComplete means that we must go back to the selector and wait to be woken up again when data is ready to read. Going back to the selector is an expensive operations and can add significant latency if there is large amount of data pending to read.
Modifications:
- AdaptiveRecvByteBufAllocator should check on each read if a step up is necessary. The step down process is left unchanged and can be more gradual at the cost of potentially over allocating.
Result:
AdaptiveRecvByteBufAllocator increases the guess size during the read loop to reduce latency when large amounts of data is being read.
Motivation:
`FixedChannelPool` allows users to configure `acquireTimeoutMillis`
and expects given value to be greater or equal to zero when timeout
action is supplied. However, validation error message said that
value is expected to be greater or equal to one. Code performs
check against zero.
Modifications:
Changed error message to say that value greater or equal to
zero is expected. Added test to check that zero is an acceptable
value.
Result:
Exception with right error message is thrown.
Motivation:
AbstractCoalescingBufferQueue#add accounts for void promises, but AbstractCoalescingBufferQueue#addFirst does not. These methods should be consistent.
Modifications:
- AbstractCoalescingBufferQueue#addFirst should account for void promises and share code with AbstractCoalescingBufferQueue#add
Result:
More correct void promise handling in AbstractCoalescingBufferQueue.
Motivation:
A regression was introduced in 86e653e which had the effect that the writability was not updated for a Channel while queueing data in the SslHandler.
Modifications:
- Factor out code that will increment / decrement pending bytes and use it in AbstractCoalescingBufferQueue and PendingWriteQueue
- Add test-case
Result:
Channel writability changes are triggered again.
Motivation:
Without a 'serialVersionUID' field, any change to a class will make
previously serialized versions unreadable.
Modifications:
Add missed 'serialVersionUID' field for all Serializable
classes.
Result:
Proper deserialization of previously serialized objects.
Motivation:
When a user called ctx.close() and used the EmbeddedChannel we did not correctly run all pending tasks which means channelInactive was never called.
Modifications:
Ensure we run all pending tasks after all operations that may change the Channel state and are part of the Channel.Unsafe impl.
Result:
Fixes [#6894].
Motivation:
ErrorProne complains that the array override doesn't match the
vararg super call. See http://errorprone.info/bugpattern/Overrides
Additionally, almost every other Future uses the vararg form, so
it would be stylistically consistent to keep it that way.
Modifications:
Use vararg override.
Result:
Cleaner, less naggy code.
Motivation:
Some ChannelOptions must be set before the Channel is really registered to have the desired effect.
Modifications:
Add another constructor argument which allows to not register the EmbeddedChannel to its EventLoop until the user calls register().
Result:
More flexible usage of EmbeddedChannel. Also Fixes [#6968].
Motivation:
We had recently a report that the issue [#6607] is still not fixed.
Modifications:
Add a testcase to prove the issue is fixed.
Result:
More tests.
Motivation:
The behaviour of the FixedChannelPool.release was inconsistent with the
SimpleChannelPool implementation, in that given promise is returned.
In the FixedChannelPool implementation a new promise was return and
this meant that the completion of that promise can be different.
Specifically on releasing a channel to a closed pool, the parameter
promise is failed with an IllegalStateException but the returned one
will have been successful (as it was completed by call to super
.release)
Modification:
Return the given promise as the result of FixedChannelPool.release
Result:
Returned promise will reflect the result of the release operation.
Motivation:
Channels returned to a FixedChannelPool after closing it remain active.
Since channels that where acquired from the pool are not closed during the close operation, they remain open even after releasing the channel back to the pool where they are then in accessible and become in-effect a connection leak.
Modification:
Close the released channel on releasing back to a closed pool.
Result:
Much harder to create a connection leak by closing an active
FixedChannelPool instance.
Motivation:
We should not fail the promise when a closed Channel is offereed back to the ChannelPool as we explicit mention that the Channel must always be returned.
Modifications:
- Not fail the promise
- Add test-case
Result:
Fixes [#6831]
Motivation:
ChannelPipeline will happily add a handler to a closed Channel's pipeline and will call handlerAdded(...) but will not call handlerRemoved(...).
Modifications:
Check if pipeline was destroyed and if so not add the handler at all but propergate an exception.
Result:
Fixes [#6768]
Motivation:
We need to release all the buffers that may be put into our inbound queue since we closed the Channel to ensure we not leak any memory. This is fine as it basically gives the same guarantees as TCP which means even if the promise was notified before its not really guaranteed that the "remote peer" will see the buffer at all.
Modifications:
Ensure we release all buffers in the inbound buffer if a doClose() is called.
Result:
No more leaks.
Motivation:
When a VoidChannelPromise is used by the user we need to ensure we propergate the exception through the ChannelPipeline otherwise the exception will just be swallowed and so the user has no idea whats going on.
Modifications:
- Always call tryFailure / trySuccess even when we use the VoidChannelPromise
- Add unit test
Result:
Fixes [#6622].
Motivation:
There are numerous usages of internalNioBuffer which hard code 0 for the index when the intention was to use the readerIndex().
Modifications:
- Remove hard coded 0 for the index and use readerIndex()
Result:
We are less susceptible to using the wrong index, and don't make assumptions about the ByteBufAllocator.
Motivation:
We have our own ThreadLocalRandom implementation to support older JDKs . That said we should prefer the JDK provided when running on JDK >= 7
Modification:
Using ThreadLocalRandom implementation of the JDK when possible.
Result:
Make use of JDK implementations when possible.
Motivation:
SelectedSelectionKeySet currently uses 2 arrays internally and users are expected to call flip() to access the underlying array and switch the active array. However we do not concurrently use 2 arrays at the same time and we can get away with using a single array if we are careful about when we reset the elements of the array.
Modifications:
- Introduce SelectedSelectionKeySetSelector which wraps a Selector and ensures we reset the underlying SelectedSelectionKeySet data structures before we select
- The loop bounds in NioEventLoop#processSelectedKeysOptimized can be defined more precisely because we know the real size of the underlying array
Result:
Fixes https://github.com/netty/netty/issues/6058
Motiviation:
Simplify implementation of compareTo/equals/hashCode for ChannelIds.
Modifications:
We simplfy the hashCode implementation for DefaultChannelId by not
making it random, but making it based on the underlying data. We fix the
compareTo implementation for DefaultChannelId by using lexicographic
comparison of the underlying data array. We fix the compareTo
implementation for CustomChannelId to avoid the possibility of overflow.
Result:
Cleaner code that is easier to maintain.
Motivation:
Result of validatePromise() is always inverted with if (!validatePromise()).
Modification:
validatePromise() renamed to isNotValidPromise() and now returns inverted state so you don't need to invert state in conditions. Also name is now more meaningful according to returned result.
Added more tests for validatePromise corner cases with Exceptions.
Result:
Code easier to read. No need in inverted result.
Motivation:
We used various mocking frameworks. We should only use one...
Modifications:
Make usage of mocking framework consistent by only using Mockito.
Result:
Less dependencies and more consistent mocking usage.
Motivation:
`SimpleChannelPool` subclasses are likely to override the `connectChannel` method, and are likely to clobber the cloned `Bootstrap` handler in the process. To allow subclasses to properly notify the pool listener of new connections, we should expose (at least) the `handler` property of the pool to subclasses.
Modifications:
Expose `SimpleChannelPool` properties to subclasses via `protected` getters.
Result:
Subclasses can now use the bootstrap, handler, health checker, and health-check-on-release preoperties from their superclass.
Motivation:
Netty provides a adaptor from ByteBuf to Java's InputStream interface. The JDK Stream interfaces have an explicit lifetime because they implement the Closable interface. This lifetime may be differnt than the ByteBuf which is wrapped, and controlled by the interface which accepts the JDK Stream. However Netty's ByteBufInputStream currently does not take reference count ownership of the underlying ByteBuf. There may be no way for existing classes which only accept the InputStream interface to communicate when they are done with the stream, other than calling close(). This means that when the stream is closed it may be appropriate to release the underlying ByteBuf, as the ownership of the underlying ByteBuf resource may be transferred to the Java Stream.
Motivation:
- ByteBufInputStream.close() supports taking reference count ownership of the underyling ByteBuf
Result:
ByteBufInputStream can assume reference count ownership so the underlying ByteBuf can be cleaned up when the stream is closed.
Motivation:
To guard against the case that a user will enqueue a lot of empty or small buffers and so raise an OOME we need to also take the overhead of the ChannelOutboundBuffer / PendingWriteQueue into account when detect if a Channel is writable or not. This is related to #5856.
Modifications:
When calculate the memory for an message that is enqueued also add some extra bytes depending on the implementation.
Result:
Better guard against OOME.
Motivation:
Some unit tests in SingleThreadEventLoopTest rely upon Thread.sleep for sequencing events between threads. This can be unreliable and result in spurious test failures if thread scheduling does not occur in a fair predictable manner.
Modifications:
- Reduce the reliance on Thread.sleep in SingleThreadEventLoopTest
Result:
Fixes https://github.com/netty/netty/issues/5851
Motivation:
the build doesnt seem to enforce this, so they piled up
Modifications:
removed unused import lines
Result:
less unused imports
Signed-off-by: radai-rosenblatt <radai.rosenblatt@gmail.com>
the implicit #fireChannelReadComplete() in EmbeddedChannel#writeInbound().
Motivation
We use EmbeddedChannels to implement a ProxyChannel of some sorts that shovels
messages between a source and a destination Channel. The latter are real network
channels (such as Epoll) and they may or may not be managed in a ChannelPool. We
could fuse both ends directly together but the EmbeddedChannel provides a nice
disposable section of a ChannelPipeline that can be used to instrument the messages
that are passing through the proxy portion.
The ideal flow looks abount like this:
source#channelRead() -> proxy#writeOutbound() -> destination#write()
source#channelReadComplete() -> proxy#flushOutbound() -> destination#flush()
destination#channelRead() -> proxy#writeInbound() -> source#write()
destination#channelReadComplete() -> proxy#flushInbound() -> source#flush()
The problem is that #writeOutbound() and #writeInbound() emit surplus #flush()
and #fireChannelReadComplete() events which in turn yield to surplus #flush()
calls on both ends of the pipeline.
Modifications
Introduce a new set of write methods that reain the same sematics as the #write()
method and #flushOutbound() and #flushInbound().
Result
It's possible to implement the above ideal flow.
Fix for EmbeddedChannel#ensureOpen() and Unit Tests for it
Some PR stuff.
Motivation:
The API documentation in ChannelConfig states that a a channel is writable,
if the number of pending bytes is below the low watermark and a
channel is not writable, if the number of pending bytes exceeds the high
watermark.
Therefore, we should use < operators instead of <= as well as > instead of >=.
Using <= and >= is also problematic, if the low watermark is equal to the high watermark,
as then a channel could be both writable and unwritable with the same number of pending
bytes (depending on whether remove() or addMessage() is called first).
The use of <= and >= was introduced in PR https://github.com/netty/netty/pull/3036, but
I don't understand why, as there doesn't seem to have been any discussion around that.
Modifications:
Use < and > operators instead of <= and >=.
Result:
High and low watermarks are treated as stated in the API docs.
Motivation:
PendingWriteQueue should guard against re-entrant writes once removeAndWriteAll() is run.
Modifications:
Continue writing until queue is empty.
Result:
Correctly guard against re-entrance.
Motivation:
If the user uses 0 as quiet period we should shutdown without any delay if possible.
Modifications:
Ensure we not introduce extra delay when a shutdown quit period of 0 is used.
Result:
EventLoop shutdown as fast as expected.
Motivation:
At the moment we call initChannel(...) in the channelRegistered(...) method which has the effect that if another ChannelInitializer is added within the initChannel(...) method the ordering of the added handlers is not correct and surprising. This is as the whole initChannel(...) method block is executed before the initChannel(...) block of the added ChannelInitializer is handled.
Modifications:
Call initChannel(...) from within handlerAdded(...) if the Channel is registered already. This is true in all cases for our DefaultChannelPipeline implementation. This way the ordering is always as expected. We still keep the old behaviour as well to not break code for other ChannelPipeline implementations (if someone ever wrote one).
Result:
Correct and expected ordering of ChannelHandlers.
Motivation:
I received a report the its not possible to add another ChannelInitialiter in the initChannel(...) method, so we should add a test case for it.
Modifications:
Added testcase.
Result:
Validate that all works as expected.
Motivation:
When a ChannelInitializer is used via ServerBootstrap.handler(...) the users handlers may be added after the internal ServerBootstrapAcceptor. This should not happen.
Modifications:
Delay the adding of the ServerBootstrapAcceptor until the initChannel(....) method returns.
Result:
Correct order of handlers in the ServerChannels ChannelPipeline.
Motivation:
This change is part of the change done in PR #5395 to provide an `AUTO_FLUSH` capability.
Splitting this change will enable to try other ways of implementing `AUTO_FLUSH`.
Modifications:
Two methods:
```java
void executeAfterEventLoopIteration(Runnable task);
boolean removeAfterEventLoopIterationTask(Runnable task);
```
are added to `SingleThreadEventLoop` class for adding/removing a task to be executed at the end of current/next iteration of this `eventloop`.
In order to support the above, a few methods are added to `SingleThreadEventExecutor`
```java
protected void afterRunningAllTasks() { }
```
This is invoked after all tasks are run for this executor OR if the passed timeout value for `runAllTasks(long timeoutNanos)` is expired.
Added a queue of `tailTasks` to `SingleThreadEventLoop` to hold all tasks to be executed at the end of every iteration.
Result:
`SingleThreadEventLoop` now has the ability to execute tasks at the end of an eventloop iteration.
Motivation:
For some use-cases it would be useful to know the number of bytes queued in the PendingWriteQueue without the need to dequeue them.
Modifications:
Add PendingWriteQueue.bytes().
Result:
Be able to get the number of bytes queued.
Motivation:
Commit 4c048d069d moved the logic of calling handlerAdded(...) to the channelRegistered(...) callback of the head of the DefaultChannelPipeline. Unfortunatlly this may execute the callbacks to late as a user may add handlers to the pipeline in the ChannelFutureListener attached to the registration future. This can lead to incorrect ordering.
Modifications:
Ensure we always invoke ChannelHandler.handlerAdded(...) for all handlers before the registration promise is notified.
Result:
Not possible of incorrect ordering or missed events.
Motivation:
We pinned the EventExecutor for a Channel in DefaultChannelPipeline. Which means if the user added multiple handlers with the same EventExecutorGroup to the ChannelPipeline it will use the same EventExecutor for all of these handlers. This may be unexpected and even not what the user wants. If the user want to use the same one for all of them it can be done by obtain an EventExecutor and pass the same instance to the add methods. Because of this we should allow to not pin.
Modifications:
Allow to disable pinning of EventExecutor for Channel based on EventExecutorGroup via ChannelOption.
Result:
Less confusing and more flexible usage of EventExecutorGroup when adding ChannelHandlers to the ChannelPipeline.
Motivation:
In commit f984870ccc I made a change which operated under invalide assumption that tasks executed by an EventExecutor will always be processed in a serial fashion. This is true for SingleThreadEventExecutor sub-classes but not part of the EventExecutor interface contract.
Because of this change implementations of EventExecutor which not strictly execute tasks in a serial fashion may miss events before handlerAdded(...) is called. This is strictly speaking not correct as there is not guarantee in this case that handlerAdded(...) will be called as first task (as there is no ordering guarentee).
Cassandra itself ships such an EventExecutor implementation which has no strict ordering to spread load across multiple threads.
Modifications:
- Add new OrderedEventExecutor interface and let SingleThreadEventExecutor / EventLoop implement / extend it.
- Only expose "restriction" of skipping events until handlerAdded(...) is called for OrderedEventExecutor implementations
- Add ThreadPoolEventExecutor implementation which executes tasks in an unordered fashion. This is used in added unit test but can also be used for protocols which not expose an strict ordering.
- Add unit test.
Result:
Resurrect the possibility to implement an EventExecutor which does not enforce serial execution of events and be able to use it with the DefaultChannelPipeline.
Motivation:
When `ChannelFactory#newChannel` crashed, `AbstractBootstrap#initAndRegister` propagates the exception to the caller instead of failing the promise.
Modifications:
- Catch exceptions from `ChannelFactory#newChannel`.
- Notify promise of such failure.
Result:
`AbstractBootstrap` gracefully handles connect failures.
Motivation:
JCTools supports both non-unsafe, unsafe versions of queues and JDK6 which allows us to shade the library in netty-common allowing it to stay "zero dependency".
Modifications:
- Remove copy paste JCTools code and shade the library (dependencies that are shaded should be removed from the <dependencies> section of the generated POM).
- Remove usage of OneTimeTask and remove it all together.
Result:
Less code to maintain and easier to update JCTools and less GC pressure as the queue implementation nt creates so much garbage
Motivation:
There is a small race while adding handlers to the pipeline because callHandlerAddedForAllHandlers() may not be run when the user calls add* but the Channel is already registered.
Modifications:
Ensure we always delay handlerAdded(..) / handlerRemoved(...) until callHandlerAddedForAllHandlers() was called.
Result:
No more race on pipeline modifications possible.
Motivation:
While doing 8fe3c83e4c I made a change which disallowed using null as name for handlers in the pipeline (this generated a new name before).
Modifications:
Revert to old behaviour and adding test case.
Result:
Allow null name again