Related: #3274
Motivation:
channelReadComplete() event is not triggered after reading successfully
in EpollDatagramChannel.
Modifications:
- Trigger exceptionCaught() event for read failure only once for less
noise
- Trigger channelReadComplete() event at the end of the read.
Result:
Fix#3274
Rebased and cleaned-up based on the work by @normanmaurer
Motivation:
Currently, IOExceptions and ClosedChannelExceptions are thrown from
inside the JNI methods. Instantiation of Java objects inside JNI code is
an expensive operation, needless to say about filling stack trace for
every instantiation of an exception.
Modifications:
Change most JNI methods to return a negative value on failure so that
the exceptions are instantiated outside the native code.
Also, pre-instantiate some commonly-thrown exceptions for better
performance.
Result:
Performance gain
Motivation:
Everytime a new connection is accepted via EpollSocketServerChannel it will create a new EpollSocketChannel that needs to get the remote and local addresses in the constructor. The current implementation uses new InetSocketAddress(String, int) to create these. This is quite slow due the implementation in oracle and openjdk.
Modifications:
Encode all needed informations into a byte array before return from jni layer and then use new InetSocketAddress(InetAddress, int) to create the socket addresses. This allows to create the InetAddress via a byte[] and so reduce the overhead, this is done either by using InetAddress.getByteAddress(byte[]) or by Inet6Address.getByteAddress(String, byte[], int).
Result:
Reduce performance overhead while accept new connections with native transport
Motivation:
So far, our TLS renegotiation test did not test changing cipher suite
during renegotiation explicitly.
Modifications:
- Switch the cipher suite during renegotiation
Result:
We are now sure the cipher suite change works.
Motivation:
We only provided a constructor in DefaultFileRegion that takes a FileChannel which means the File itself needs to get opened on construction. This has the problem that if you want to write a lot of Files very fast you may end up with may open FD's even if they are not needed yet. This can lead to hit the open FD limit of the OS.
Modifications:
Add a new constructor to DefaultFileRegion which allows to construct it from a File. The FileChannel will only be obtained when transferTo(...) is called or the DefaultFileRegion is explicit open'ed via open() (this is needed for the native epoll transport)
Result:
Less resource usage when writing a lot of DefaultFileRegion.
Related: #3125
Motivation:
We did not expose a way to initiate TLS renegotiation and to get
notified when the renegotiation is done.
Modifications:
- Add SslHandler.renegotiate() so that a user can initiate TLS
renegotiation and get the future that's notified on completion
- Make SslHandler.handshakeFuture() return the future for the most
recent handshake so that a user can get the future of the last
renegotiation
- Add the test for renegotiation to SocketSslEchoTest
Result:
Both client-initiated and server-initiated renegotiations are now
supported properly.
Motivation:
So far, we relied on the domain name resolution mechanism provided by
JDK. It served its purpose very well, but had the following
shortcomings:
- Domain name resolution is performed in a blocking manner.
This becomes a problem when a user has to connect to thousands of
different hosts. e.g. web crawlers
- It is impossible to employ an alternative cache/retry policy.
e.g. lower/upper bound in TTL, round-robin
- It is impossible to employ an alternative name resolution mechanism.
e.g. Zookeeper-based name resolver
Modification:
- Add the resolver API in the new module: netty-resolver
- Implement the DNS-based resolver: netty-resolver-dns
.. which uses netty-codec-dns
- Make ChannelFactory reusable because it's now used by
io.netty.bootstrap, io.netty.resolver.dns, and potentially by other
modules in the future
- Move ChannelFactory from io.netty.bootstrap to io.netty.channel
- Deprecate the old ChannelFactory
- Add ReflectiveChannelFactory
Result:
It is trivial to resolve a large number of domain names asynchronously.
Motivation:
JDK's exception messages triggered by a connection attempt failure do
not contain the related remote address in its message. We currently
append the remote address to ConnectException's message, but I found
that we need to cover more exception types such as SocketException.
Modifications:
- Add AbstractUnsafe.annotateConnectException() to de-duplicate the
code that appends the remote address
Result:
- Less duplication
- A transport implementor can annotate connection attempt failure
message more easily
Motivation:
We use malloc(1) in the on JNI_OnLoad method but never free the allocated memory. This means we have a tiny memory leak of 1 byte.
Modifications:
Call free(...) on previous allocated memory.
Result:
Fix memory leak
Motiviation:
If sendmmsg is already defined then the native epoll module failed to build because of conflicting definitions.
The mmsghdr type was also redefined on systems that already supported this structure.
Modifications:
Provide a way so that systems which already define sendmmsg and mmsghdr can build
Provide a way so that systems which don't define sendmmsg and mmsghdr can build
Result:
The native EPOLL module can build in more environments
Motivation:
In linux it is possible to write more then one buffer withone syscall when sending datagram messages.
Modifications:
Not copy CompositeByteBuf if it only contains direct buffers.
Result:
More performance due less overhead for copy.
Motivation:
On linux with glibc >= 2.14 it is possible to send multiple DatagramPackets with one syscall. This can be a huge performance win and so we should support it in our native transport.
Modification:
- Add support for sendmmsg by reuse IovArray
- Factor out ThreadLocal support of IovArray to IovArrayThreadLocal for better separation as we use IovArray also without ThreadLocal in NativeDatagramPacketArray now
- Introduce NativeDatagramPacketArray which is used for sendmmsg(...)
- Implement sendmmsg(...) via jni
- Expand DatagramUnicastTest to test also sendmmsg(...)
Result:
Netty now automatically use sendmmsg(...) if it is supported and we have more then 1 DatagramPacket in the ChannelOutboundBuffer and flush() is called.
Motivation:
On linux it is possible to use the sendMsg(...) system call to write multiple buffers with one system call when using datagram/udp.
Modifications:
- Implement the needed changes and make use of sendMsg(...) if possible for max performance
- Add tests that test sending datagram packets with all kind of different ByteBuf implementations.
Result:
Performance improvement when using CompoisteByteBuf and EpollDatagramChannel.
Motivation:
InetAddress.getByName(...) uses exceptions for control flow when try to parse IPv4-mapped-on-IPv6 addresses. This is quite expensive.
Modifications:
Detect IPv4-mapped-on-IPv6 addresses in the JNI level and convert to IPv4 addresses before pass to InetAddress.getByName(...) (via InetSocketAddress constructor).
Result:
Eliminate performance problem causes by exception creation when parsing IPv4-mapped-on-IPv6 addresses.
Motivation:
In EpollSocketchannel.doWriteFileRegion(...) we need to make sure we write until sendFile(...) returns either 0 or all is written. Otherwise we may not get notified once the Channel is writable again.
This is the case as we use EPOLL_ET.
Modifications:
Always write until either sendFile returns 0 or all is written.
Result:
No more hangs when writing DefaultFileRegion can happen.
Motivation:
There were no way to efficient write a CompositeByteBuf as we always did a memory copy to a direct buffer in this case. This is not needed as we can just write a CompositeByteBuf as long as all the components are buffers with a memory address.
Modifications:
- Write CompositeByteBuf which contains only direct buffers without memory copy
- Also handle CompositeByteBuf that have more components then 1024.
Result:
More efficient writing of CompositeByteBuf.
Related issue: #2764
Motivation:
EpollSocketChannel.writeFileRegion() does not handle the case where the
position of a FileRegion is non-zero properly.
Modifications:
- Improve SocketFileRegionTest so that it tests the cases where the file
transfer begins from the middle of the file
- Add another jlong parameter named 'base_off' so that we can take the
position of a FileRegion into account
Result:
Improved test passes. Corruption is gone.
Motivation:
At the moment it's only possible for a user to set the RecvByteBufAllocator for a Channel but not access the Handle once it is assigned. This makes it hard to write more flexible implementations.
Modifications:
Add a new method to the Channel.Unsafe to allow access the the used Handle for the Channel. The RecvByteBufAllocator.Handle is created lazily.
Result:
It's possible to write more flexible implementatons that allow to adjust stuff on the fly for a Handle that is used by a Channel
Motivation:
We did various changes related to the ChannelOutboundBuffer in 4.0 branch. This commit port all of them over and so make sure our branches are synced in terms of these changes.
Related to [#2734], [#2709], [#2729], [#2710] and [#2693] .
Modification:
Port all changes that was done on the ChannelOutboundBuffer.
This includes the port of the following commits:
- 73dfd7c01b
- 997d8c32d2
- e282e504f1
- 5e5d1a58fd
- 8ee3575e72
- d6f0d12a86
- 16e50765d1
- 3f3e66c31a
Result:
- Less memory usage by ChannelOutboundBuffer
- Same code as in 4.0 branch
- Make it possible to use ChannelOutboundBuffer with Channel implementation that not extends AbstractChannel
Related issue: #2733
Motivation:
Unlike OpenSsl, Epoll lacks a couple useful availability checker
methods:
- ensureAvailability()
- unavailabilityCause()
Modifications:
Add missing methods
Result:
More ways to check the availability and to get the cause of
unavailability programatically.
Motivation:
We sometimes not use the correct exception message when throw it from the native code.
Modifications:
Fixed the message.
Result:
Correct message in exception
Motivation:
We have some inconsistency when handling writes. Sometimes we call ChannelOutboundBuffer.progress(...) also for complete writes and sometimes not. We should call it always.
Modifications:
Correctly call ChannelOuboundBuffer.progress(...) for complete and incomplete writes.
Result:
Consistent behavior
Motivation:
While optimize gathering writes I introduced a bug when writing single ByteBuf that have a memoryAddress. This regression was introduced by 88bd6e7a93.
Modifications:
Correctly use the writerIndex as argument when call Native.writeAddress(...)
Result:
No more corruption while write single buffers.
Motivation:
While benchmarking the native transport with gathering writes I noticed that it is quite slow. This is due the fact that we need to do a lot of array copies to get the buffers into the iov array.
Modification:
Introduce a new class calles IovArray which allows to fill buffers directly in a iov array that can be passed over to JNI without any array copies. This gives a nice optimization in terms of speed when doing gathering writes.
Result:
Big performance improvement when doing gathering writes. See the included benchmark...
Before:
[nmaurer@xxx]~% wrk/wrk -H 'Host: localhost' -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' -H 'Connection: keep-alive' -d 120 -c 256 -t 16 --pipeline 256 http://xxx:8080/plaintext
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 23.44ms 16.37ms 259.57ms 91.77%
Req/Sec 181.99k 31.69k 304.60k 78.12%
346544071 requests in 2.00m, 46.48GB read
Requests/sec: 2887885.09
Transfer/sec: 396.59MB
With this change:
[nmaurer@xxx]~% wrk/wrk -H 'Host: localhost' -H 'Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8' -H 'Connection: keep-alive' -d 120 -c 256 -t 16 --pipeline 256 http://xxx:8080/plaintext
Running 2m test @ http://xxx:8080/plaintext
16 threads and 256 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 21.93ms 16.33ms 305.73ms 92.34%
Req/Sec 194.56k 33.75k 309.33k 77.04%
369617503 requests in 2.00m, 49.57GB read
Requests/sec: 3080169.65
Transfer/sec: 423.00MB
Motivation:
At the moment we use Get*ArrayElement all the time in the epoll transport which may be wasteful as the JVM may do a memory copy for this. For code-path that will get executed fast (without blocking) we should better make use of GetPrimitiveArrayCritical and ReleasePrimitiveArrayCritical as this signal the JVM that we not want to do any memory copy if not really needed. It is important to only do this on non-blocking code-path as this may even suspend the GC to disallow the JVM to move the arrays around.
See also http://docs.oracle.com/javase/7/docs/technotes/guides/jni/spec/functions.html#GetPrimitiveArrayCritical
Modification:
Make use of GetPrimitiveArrayCritical / ReleasePrimitiveArrayCritical as replacement for Get*ArrayElement / Release*ArrayElement where possible.
Result:
Better performance due less memory copies.
Motivation:
In EpollSocketchannel.writeBytesMultiple(...) we loop over all buffers to see if we need to adjust the readerIndex for incomplete writes. We can skip this if we know that everything was written (a.k.a complete write).
Modification:
Use fast-path if all bytes are written and so no need to loop over buffers
Result:
Fast write path for the average use.
Motivation:
At the moment NioSocketChannelOutboundBuffer.nioBuffers() / EpollSocketChannelOutboundBuffer.memoryAddresses() returns null if something is contained in the ChannelOutboundBuffer which is not a ByteBuf. This is a problem for two reasons:
1 - In the javadocs we state that it will never return null
2 - We may do a not optimal write as there may be things that could be written via gathering writes
Modifications:
Change NioSocketChannelOutboundBuffer.nioBuffers() / EpollSocketChannelOutboundBuffer.memoryAddresses() to never return null but have it contain all ByteBuffer that were found before the non ByteBuf. This way we can do a gathering write and also conform to the javadocs.
Result:
Better speed and also correct implementation in terms of the api.
Motivation:
In the previous fix for #2667 I did introduce a bit overhead by calling setEpollOut() too often.
Modification:
Only call setEpollOut() if really needed and remove unused code.
Result:
Less overhead when saturate network.
Motivation:
As a DatagramChannel supports to write to multiple remote peers we must not close the Channel once a IOException accours as this error may be only valid for one remote peer.
Modification:
Continue writing on IOException.
Result:
DatagramChannel can be used even after an IOException accours during writing.
Motivation:
We need to continue write until we hit EAGAIN to make sure we not see an starvation
Modification:
Write until EAGAIN is returned
Result:
No starvation when using native transport with ET.
Motivation:
Because of a missing return statement we may produce a NPE when try to fullfill the connect ChannelPromise when it was fullfilled before.
Modification:
Add missing return statement.
Result:
No more NPE.
Motivation:
The handling of IOV_MAX was done in JNI code base which makes stuff really complicated to maintain etc.
Modifications:
Move handling of IOV_MAX to java code to simplify stuff
Result:
Cleaner code.
Motivation:
In our nio implementation we use write-spinning for maximize throughput, but in the native implementation this is not used.
Modification:
Respect writeSpinCount in native transport.
Result:
Better throughput
Motivation:
Currently when Native.writev(...) is used it is possible to see a JVM segfault because the offset is updated to early.
Modification:
Only update the offset once it is safe to do so.
Result:
No more segfault
Motivation:
epoll transport fails on gathering write of more then 1024 buffers. As linux supports max. 1024 iov entries when calling writev(...) the epoll transport throws an exception.
Thanks again to @blucas to provide me with a reproducer and so helped me to understand what the issue is.
Modifications:
Make sure we break down the writes if to many buffers are uses for gathering writes.
Result:
Gathering writes work with any number of buffers
Motivation:
Currently it is impossible to build netty on linux system that not define SO_REUSEPORT even if it is supported.
Modification:
Define SO_REUSEPORT if not defined.
Result:
Possible to build on more linux dists.
Motivation:
We use the nanoTime of the scheduledTasks to calculate the milli-seconds to wait for a select operation to select something. Once these elapsed we check if there was something selected or some task is ready for processing. Unfortunally we not take into account scheduled tasks here so the selection loop will continue if only scheduled tasks are ready for processing. This will delay the execution of these tasks.
Modification:
- Check if a scheduled task is ready after selecting
- also make a tiny change in NioEventLoop to not trigger a rebuild if nothing was selected because the timeout was reached a few times in a row.
Result:
Execute scheduled tasks on time.
Motivation:
When we do a (env*)->GetObjectArrayElement(...) call we may created many local references which will only be cleaned up once we exist the native method. Thus a lot of memory can be used and so a StackOverFlow may be triggered. Beside this the JNI specification only say that an implementation must cope with 16 local references.
Modification:
Call (env*)->ReleaseLocalRef(...) to release the resource once not needed anymore.
Result:
Less memory usage and guard against StackOverflow
Motivation:
At the moment there is no simple way for a user to check if the native epoll transport can be used on the running platform. Thus the user can only try to instance it and catch any exception and fallback to nio transport.
Modification:
Add Epoll.isAvailable() which allows to check if epoll can be used.
Result:
User can easily check if epoll transport can be used or not
Motivation:
When using openjdk and oracle jdk's nio (while using the nio transport) the ServerSocketChannel uses SO_REUSEADDR by default. Our native transport should do the same to make it easier to switch between the different implementations and get the expected result.
Modification:
Change EpollServerSocketChannelConfig to set SO_REUSEADDR on the created socket.
Result:
SO_REUSEADDR is used by default on servers.
Motivation:
We need to map from ints to AbstractEpollChannel in EpollEventLoop but there is no need for box to Integer.
Modification:
Replace Map with IntObjectMap.
Result:
No more auto-boxing needed.
Motivation:
Some users already use an SSLEngine implementation in finagle-native. It
wraps OpenSSL to get higher SSL performance. However, to take advantage
of it, finagle-native must be compiled manually, and it means we cannot
pull it in as a dependency and thus we cannot test our SslHandler
against the OpenSSL-based SSLEngine. For an instance, we had #2216.
Because the construction procedures of JDK SSLEngine and OpenSslEngine
are very different from each other, we also need to provide a universal
way to enable SSL in a Netty application.
Modifications:
- Pull netty-tcnative in as an optional dependency.
http://netty.io/wiki/forked-tomcat-native.html
- Backport NativeLibraryLoader from 4.0
- Move OpenSSL-based SSLEngine implementation into our code base.
- Copied from finagle-native; originally written by @jpinner et al.
- Overall cleanup by @trustin.
- Run all SslHandler tests with both default SSLEngine and OpenSslEngine
- Add a unified API for creating an SSL context
- SslContext allows you to create a new SSLEngine or a new SslHandler
with your PKCS#8 key and X.509 certificate chain.
- Add JdkSslContext and its subclasses
- Add OpenSslServerContext
- Add ApplicationProtocolSelector to ensure the future support for NPN
(NextProtoNego) and ALPN (Application Layer Protocol Negotiation) on
the client-side.
- Add SimpleTrustManagerFactory to help a user write a
TrustManagerFactory easily, which should be useful for those who need
to write an alternative verification mechanism. For example, we can
use it to implement an unsafe TrustManagerFactory that accepts
self-signed certificates for testing purposes.
- Add InsecureTrustManagerFactory and FingerprintTrustManager for quick
and dirty testing
- Add SelfSignedCertificate class which generates a self-signed X.509
certificate very easily.
- Update all our examples to use SslContext.newClient/ServerContext()
- SslHandler now logs the chosen cipher suite when handshake is
finished.
Result:
- Cleaner unified API for configuring an SSL client and an SSL server
regardless of its internal implementation.
- When native libraries are available, OpenSSL-based SSLEngine
implementation is selected automatically to take advantage of its
performance benefit.
- Examples take advantage of this modification and thus are cleaner.
Motivation:
At the moment we sometimes use only RecvByteBufAllocator.guess() to guess the next size and the use the ByteBufAllocator.* directly to allocate the buffer. We should always use RecvByteBufAllocator.allocate(...) all the time as this makes the behavior easier to adjust.
Modifications:
Change the read() implementations to make use of RecvByteBufAllocator.
Result:
Behavior is more consistent.
Motivation:
When doing a gathering write we need to update the indices after the write partial completes. In the current code-base we use the wrong value when compare the expected written bytes and the actual written bytes.
Modifications:
Use the correct value when compare.
Result:
Indices are updated correctly and so no corruption can happen when resume writing after data was only partial written before.
Motivation:
So far, we used a very simple platform string such as linux64 and
linux32. However, this is far from perfection because it does not
include anything about the CPU architecture.
Also, the current build tries to put multiple versions of .so files into
a single JAR. This doesn't work very well when we have to ship for many
different platforms. Think about shipping .so/.dynlib files for both
Linux and Mac OS X.
Modification:
- Use os-maven-plugin as an extension to determine the current OS and
CPU architecture reliable at build time
- Use Maven classifier instead of trying to put all shared libraries
into a single JAR
- NativeLibraryLoader does not guess the OS and bit mode anymore and it
always looks for the same location regardless of platform, because the
Maven classifier does the job instead.
Result:
Better scalable native library deployment and retrieval
Motivation:
4 and 5 were diverged long time ago and we recently reverted some of the
early commits in master. We must make sure 4.1 and master are not very
different now.
Modification:
Remove ChannelHandlerInvoker.writeAndFlush(...) and the related
implementations.
Result:
4.1 and master got closer.