2016-02-10 00:12:00 +01:00
|
|
|
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
2017-07-16 01:03:42 +02:00
|
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
|
|
// (found in the LICENSE.Apache file in the root directory).
|
2013-10-16 23:59:46 +02:00
|
|
|
//
|
2011-03-18 23:37:00 +01:00
|
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
//
|
|
|
|
// WriteBatch::rep_ :=
|
|
|
|
// sequence: fixed64
|
|
|
|
// count: fixed32
|
|
|
|
// data: record[count]
|
|
|
|
// record :=
|
2013-03-21 23:59:47 +01:00
|
|
|
// kTypeValue varstring varstring
|
2011-03-18 23:37:00 +01:00
|
|
|
// kTypeDeletion varstring
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
// kTypeSingleDeletion varstring
|
|
|
|
// kTypeMerge varstring varstring
|
2014-01-07 23:41:42 +01:00
|
|
|
// kTypeColumnFamilyValue varint32 varstring varstring
|
|
|
|
// kTypeColumnFamilyDeletion varint32 varstring varstring
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
// kTypeColumnFamilySingleDeletion varint32 varstring varstring
|
|
|
|
// kTypeColumnFamilyMerge varint32 varstring varstring
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
// kTypeBeginPrepareXID varstring
|
|
|
|
// kTypeEndPrepareXID
|
|
|
|
// kTypeCommitXID varstring
|
|
|
|
// kTypeRollbackXID varstring
|
|
|
|
// kTypeNoop
|
2011-03-18 23:37:00 +01:00
|
|
|
// varstring :=
|
|
|
|
// len: varint32
|
|
|
|
// data: uint8[len]
|
|
|
|
|
2013-08-23 17:38:13 +02:00
|
|
|
#include "rocksdb/write_batch.h"
|
2015-07-11 05:15:45 +02:00
|
|
|
|
2016-07-07 23:45:29 +02:00
|
|
|
#include <map>
|
2015-07-11 05:15:45 +02:00
|
|
|
#include <stack>
|
|
|
|
#include <stdexcept>
|
2017-03-22 19:07:52 +01:00
|
|
|
#include <type_traits>
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
#include <vector>
|
2015-07-11 05:15:45 +02:00
|
|
|
|
2014-08-19 00:19:17 +02:00
|
|
|
#include "db/column_family.h"
|
2015-09-02 22:58:22 +02:00
|
|
|
#include "db/db_impl.h"
|
|
|
|
#include "db/dbformat.h"
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
#include "db/flush_scheduler.h"
|
2011-03-18 23:37:00 +01:00
|
|
|
#include "db/memtable.h"
|
2016-06-14 01:17:26 +02:00
|
|
|
#include "db/merge_context.h"
|
2015-08-07 02:59:05 +02:00
|
|
|
#include "db/snapshot_impl.h"
|
2011-03-18 23:37:00 +01:00
|
|
|
#include "db/write_batch_internal.h"
|
2017-04-06 04:02:00 +02:00
|
|
|
#include "monitoring/perf_context_imp.h"
|
|
|
|
#include "monitoring/statistics.h"
|
2015-09-02 22:58:22 +02:00
|
|
|
#include "rocksdb/merge_operator.h"
|
2011-03-18 23:37:00 +01:00
|
|
|
#include "util/coding.h"
|
2016-11-16 00:18:56 +01:00
|
|
|
#include "util/string_util.h"
|
2011-03-18 23:37:00 +01:00
|
|
|
|
2013-10-04 06:49:15 +02:00
|
|
|
namespace rocksdb {
|
2011-03-18 23:37:00 +01:00
|
|
|
|
2015-11-06 16:03:30 +01:00
|
|
|
// anon namespace for file-local types
|
|
|
|
namespace {
|
|
|
|
|
|
|
|
enum ContentFlags : uint32_t {
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
DEFERRED = 1 << 0,
|
|
|
|
HAS_PUT = 1 << 1,
|
|
|
|
HAS_DELETE = 1 << 2,
|
|
|
|
HAS_SINGLE_DELETE = 1 << 3,
|
|
|
|
HAS_MERGE = 1 << 4,
|
|
|
|
HAS_BEGIN_PREPARE = 1 << 5,
|
|
|
|
HAS_END_PREPARE = 1 << 6,
|
|
|
|
HAS_COMMIT = 1 << 7,
|
|
|
|
HAS_ROLLBACK = 1 << 8,
|
2016-08-16 17:16:04 +02:00
|
|
|
HAS_DELETE_RANGE = 1 << 9,
|
2017-10-03 18:08:07 +02:00
|
|
|
HAS_BLOB_INDEX = 1 << 10,
|
2015-11-06 16:03:30 +01:00
|
|
|
};
|
|
|
|
|
|
|
|
struct BatchContentClassifier : public WriteBatch::Handler {
|
|
|
|
uint32_t content_flags = 0;
|
|
|
|
|
|
|
|
Status PutCF(uint32_t, const Slice&, const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_PUT;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status DeleteCF(uint32_t, const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_DELETE;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status SingleDeleteCF(uint32_t, const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_SINGLE_DELETE;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2016-08-16 17:16:04 +02:00
|
|
|
Status DeleteRangeCF(uint32_t, const Slice&, const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_DELETE_RANGE;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2015-11-06 16:03:30 +01:00
|
|
|
Status MergeCF(uint32_t, const Slice&, const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_MERGE;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
|
2017-10-03 18:08:07 +02:00
|
|
|
Status PutBlobIndexCF(uint32_t, const Slice&, const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_BLOB_INDEX;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
Status MarkBeginPrepare() override {
|
|
|
|
content_flags |= ContentFlags::HAS_BEGIN_PREPARE;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status MarkEndPrepare(const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_END_PREPARE;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status MarkCommit(const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_COMMIT;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status MarkRollback(const Slice&) override {
|
|
|
|
content_flags |= ContentFlags::HAS_ROLLBACK;
|
|
|
|
return Status::OK();
|
|
|
|
}
|
2015-11-06 16:03:30 +01:00
|
|
|
};
|
|
|
|
|
|
|
|
} // anon namespace
|
|
|
|
|
2015-07-11 05:15:45 +02:00
|
|
|
struct SavePoints {
|
|
|
|
std::stack<SavePoint> stack;
|
|
|
|
};
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
WriteBatch::WriteBatch(size_t reserved_bytes, size_t max_bytes)
|
|
|
|
: save_points_(nullptr), content_flags_(0), max_bytes_(max_bytes), rep_() {
|
2016-04-02 00:23:46 +02:00
|
|
|
rep_.reserve((reserved_bytes > WriteBatchInternal::kHeader) ?
|
2016-03-31 04:56:55 +02:00
|
|
|
reserved_bytes : WriteBatchInternal::kHeader);
|
2016-03-30 19:35:22 +02:00
|
|
|
rep_.resize(WriteBatchInternal::kHeader);
|
2015-11-06 16:03:30 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
WriteBatch::WriteBatch(const std::string& rep)
|
|
|
|
: save_points_(nullptr),
|
|
|
|
content_flags_(ContentFlags::DEFERRED),
|
2017-04-11 00:38:34 +02:00
|
|
|
max_bytes_(0),
|
2015-11-06 16:03:30 +01:00
|
|
|
rep_(rep) {}
|
|
|
|
|
|
|
|
WriteBatch::WriteBatch(const WriteBatch& src)
|
|
|
|
: save_points_(src.save_points_),
|
Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 20:31:26 +02:00
|
|
|
wal_term_point_(src.wal_term_point_),
|
2015-11-06 16:03:30 +01:00
|
|
|
content_flags_(src.content_flags_.load(std::memory_order_relaxed)),
|
2017-04-11 00:38:34 +02:00
|
|
|
max_bytes_(src.max_bytes_),
|
2015-11-06 16:03:30 +01:00
|
|
|
rep_(src.rep_) {}
|
|
|
|
|
2017-09-18 23:36:53 +02:00
|
|
|
WriteBatch::WriteBatch(WriteBatch&& src) noexcept
|
2015-11-06 16:03:30 +01:00
|
|
|
: save_points_(std::move(src.save_points_)),
|
Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 20:31:26 +02:00
|
|
|
wal_term_point_(std::move(src.wal_term_point_)),
|
2015-11-06 16:03:30 +01:00
|
|
|
content_flags_(src.content_flags_.load(std::memory_order_relaxed)),
|
2017-04-11 00:38:34 +02:00
|
|
|
max_bytes_(src.max_bytes_),
|
2015-11-06 16:03:30 +01:00
|
|
|
rep_(std::move(src.rep_)) {}
|
|
|
|
|
|
|
|
WriteBatch& WriteBatch::operator=(const WriteBatch& src) {
|
|
|
|
if (&src != this) {
|
|
|
|
this->~WriteBatch();
|
|
|
|
new (this) WriteBatch(src);
|
|
|
|
}
|
|
|
|
return *this;
|
|
|
|
}
|
|
|
|
|
|
|
|
WriteBatch& WriteBatch::operator=(WriteBatch&& src) {
|
|
|
|
if (&src != this) {
|
|
|
|
this->~WriteBatch();
|
|
|
|
new (this) WriteBatch(std::move(src));
|
|
|
|
}
|
|
|
|
return *this;
|
2011-03-18 23:37:00 +01:00
|
|
|
}
|
|
|
|
|
2015-12-16 00:26:20 +01:00
|
|
|
WriteBatch::~WriteBatch() { delete save_points_; }
|
2011-03-18 23:37:00 +01:00
|
|
|
|
2011-05-21 04:17:43 +02:00
|
|
|
WriteBatch::Handler::~Handler() { }
|
|
|
|
|
2017-07-22 03:13:59 +02:00
|
|
|
void WriteBatch::Handler::LogData(const Slice& blob) {
|
2013-08-15 01:32:46 +02:00
|
|
|
// If the user has not specified something to do with blobs, then we ignore
|
|
|
|
// them.
|
|
|
|
}
|
|
|
|
|
2013-08-22 03:27:48 +02:00
|
|
|
bool WriteBatch::Handler::Continue() {
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2011-03-18 23:37:00 +01:00
|
|
|
void WriteBatch::Clear() {
|
|
|
|
rep_.clear();
|
2016-03-30 19:43:00 +02:00
|
|
|
rep_.resize(WriteBatchInternal::kHeader);
|
2015-07-11 05:15:45 +02:00
|
|
|
|
2015-11-06 16:03:30 +01:00
|
|
|
content_flags_.store(0, std::memory_order_relaxed);
|
|
|
|
|
2015-07-11 05:15:45 +02:00
|
|
|
if (save_points_ != nullptr) {
|
|
|
|
while (!save_points_->stack.empty()) {
|
|
|
|
save_points_->stack.pop();
|
|
|
|
}
|
|
|
|
}
|
Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 20:31:26 +02:00
|
|
|
|
|
|
|
wal_term_point_.clear();
|
2011-03-18 23:37:00 +01:00
|
|
|
}
|
|
|
|
|
2013-06-26 19:50:58 +02:00
|
|
|
int WriteBatch::Count() const {
|
|
|
|
return WriteBatchInternal::Count(this);
|
|
|
|
}
|
|
|
|
|
2015-11-06 16:03:30 +01:00
|
|
|
uint32_t WriteBatch::ComputeContentFlags() const {
|
|
|
|
auto rv = content_flags_.load(std::memory_order_relaxed);
|
|
|
|
if ((rv & ContentFlags::DEFERRED) != 0) {
|
|
|
|
BatchContentClassifier classifier;
|
|
|
|
Iterate(&classifier);
|
|
|
|
rv = classifier.content_flags;
|
|
|
|
|
|
|
|
// this method is conceptually const, because it is performing a lazy
|
|
|
|
// computation that doesn't affect the abstract state of the batch.
|
|
|
|
// content_flags_ is marked mutable so that we can perform the
|
|
|
|
// following assignment
|
|
|
|
content_flags_.store(rv, std::memory_order_relaxed);
|
|
|
|
}
|
|
|
|
return rv;
|
|
|
|
}
|
|
|
|
|
Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 20:31:26 +02:00
|
|
|
void WriteBatch::MarkWalTerminationPoint() {
|
|
|
|
wal_term_point_.size = GetDataSize();
|
|
|
|
wal_term_point_.count = Count();
|
|
|
|
wal_term_point_.content_flags = content_flags_;
|
|
|
|
}
|
|
|
|
|
2015-11-06 16:03:30 +01:00
|
|
|
bool WriteBatch::HasPut() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_PUT) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WriteBatch::HasDelete() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_DELETE) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WriteBatch::HasSingleDelete() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_SINGLE_DELETE) != 0;
|
|
|
|
}
|
|
|
|
|
2016-08-16 17:16:04 +02:00
|
|
|
bool WriteBatch::HasDeleteRange() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_DELETE_RANGE) != 0;
|
|
|
|
}
|
|
|
|
|
2015-11-06 16:03:30 +01:00
|
|
|
bool WriteBatch::HasMerge() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_MERGE) != 0;
|
|
|
|
}
|
|
|
|
|
2016-04-02 00:23:46 +02:00
|
|
|
bool ReadKeyFromWriteBatchEntry(Slice* input, Slice* key, bool cf_record) {
|
|
|
|
assert(input != nullptr && key != nullptr);
|
|
|
|
// Skip tag byte
|
|
|
|
input->remove_prefix(1);
|
|
|
|
|
|
|
|
if (cf_record) {
|
|
|
|
// Skip column_family bytes
|
|
|
|
uint32_t cf;
|
|
|
|
if (!GetVarint32(input, &cf)) {
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Extract key
|
|
|
|
return GetLengthPrefixedSlice(input, key);
|
|
|
|
}
|
|
|
|
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
bool WriteBatch::HasBeginPrepare() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_BEGIN_PREPARE) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WriteBatch::HasEndPrepare() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_END_PREPARE) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WriteBatch::HasCommit() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_COMMIT) != 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WriteBatch::HasRollback() const {
|
|
|
|
return (ComputeContentFlags() & ContentFlags::HAS_ROLLBACK) != 0;
|
|
|
|
}
|
|
|
|
|
2014-08-19 00:19:17 +02:00
|
|
|
Status ReadRecordFromWriteBatch(Slice* input, char* tag,
|
|
|
|
uint32_t* column_family, Slice* key,
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
Slice* value, Slice* blob, Slice* xid) {
|
2014-08-19 00:19:17 +02:00
|
|
|
assert(key != nullptr && value != nullptr);
|
|
|
|
*tag = (*input)[0];
|
|
|
|
input->remove_prefix(1);
|
|
|
|
*column_family = 0; // default
|
|
|
|
switch (*tag) {
|
|
|
|
case kTypeColumnFamilyValue:
|
|
|
|
if (!GetVarint32(input, column_family)) {
|
|
|
|
return Status::Corruption("bad WriteBatch Put");
|
|
|
|
}
|
|
|
|
// intentional fallthrough
|
|
|
|
case kTypeValue:
|
|
|
|
if (!GetLengthPrefixedSlice(input, key) ||
|
|
|
|
!GetLengthPrefixedSlice(input, value)) {
|
|
|
|
return Status::Corruption("bad WriteBatch Put");
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case kTypeColumnFamilyDeletion:
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
case kTypeColumnFamilySingleDeletion:
|
2014-08-19 00:19:17 +02:00
|
|
|
if (!GetVarint32(input, column_family)) {
|
|
|
|
return Status::Corruption("bad WriteBatch Delete");
|
|
|
|
}
|
|
|
|
// intentional fallthrough
|
|
|
|
case kTypeDeletion:
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
case kTypeSingleDeletion:
|
2014-08-19 00:19:17 +02:00
|
|
|
if (!GetLengthPrefixedSlice(input, key)) {
|
|
|
|
return Status::Corruption("bad WriteBatch Delete");
|
|
|
|
}
|
|
|
|
break;
|
2016-08-16 17:16:04 +02:00
|
|
|
case kTypeColumnFamilyRangeDeletion:
|
|
|
|
if (!GetVarint32(input, column_family)) {
|
|
|
|
return Status::Corruption("bad WriteBatch DeleteRange");
|
|
|
|
}
|
|
|
|
// intentional fallthrough
|
|
|
|
case kTypeRangeDeletion:
|
|
|
|
// for range delete, "key" is begin_key, "value" is end_key
|
|
|
|
if (!GetLengthPrefixedSlice(input, key) ||
|
|
|
|
!GetLengthPrefixedSlice(input, value)) {
|
|
|
|
return Status::Corruption("bad WriteBatch DeleteRange");
|
|
|
|
}
|
|
|
|
break;
|
2014-08-19 00:19:17 +02:00
|
|
|
case kTypeColumnFamilyMerge:
|
|
|
|
if (!GetVarint32(input, column_family)) {
|
|
|
|
return Status::Corruption("bad WriteBatch Merge");
|
|
|
|
}
|
|
|
|
// intentional fallthrough
|
|
|
|
case kTypeMerge:
|
|
|
|
if (!GetLengthPrefixedSlice(input, key) ||
|
|
|
|
!GetLengthPrefixedSlice(input, value)) {
|
|
|
|
return Status::Corruption("bad WriteBatch Merge");
|
|
|
|
}
|
|
|
|
break;
|
2017-10-03 18:08:07 +02:00
|
|
|
case kTypeColumnFamilyBlobIndex:
|
|
|
|
if (!GetVarint32(input, column_family)) {
|
|
|
|
return Status::Corruption("bad WriteBatch BlobIndex");
|
|
|
|
}
|
|
|
|
// intentional fallthrough
|
|
|
|
case kTypeBlobIndex:
|
|
|
|
if (!GetLengthPrefixedSlice(input, key) ||
|
|
|
|
!GetLengthPrefixedSlice(input, value)) {
|
|
|
|
return Status::Corruption("bad WriteBatch BlobIndex");
|
|
|
|
}
|
|
|
|
break;
|
2014-08-19 00:19:17 +02:00
|
|
|
case kTypeLogData:
|
|
|
|
assert(blob != nullptr);
|
|
|
|
if (!GetLengthPrefixedSlice(input, blob)) {
|
|
|
|
return Status::Corruption("bad WriteBatch Blob");
|
|
|
|
}
|
|
|
|
break;
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
case kTypeNoop:
|
|
|
|
case kTypeBeginPrepareXID:
|
|
|
|
break;
|
|
|
|
case kTypeEndPrepareXID:
|
|
|
|
if (!GetLengthPrefixedSlice(input, xid)) {
|
|
|
|
return Status::Corruption("bad EndPrepare XID");
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case kTypeCommitXID:
|
|
|
|
if (!GetLengthPrefixedSlice(input, xid)) {
|
|
|
|
return Status::Corruption("bad Commit XID");
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case kTypeRollbackXID:
|
|
|
|
if (!GetLengthPrefixedSlice(input, xid)) {
|
|
|
|
return Status::Corruption("bad Rollback XID");
|
|
|
|
}
|
|
|
|
break;
|
2014-08-19 00:19:17 +02:00
|
|
|
default:
|
|
|
|
return Status::Corruption("unknown WriteBatch tag");
|
|
|
|
}
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2011-05-21 04:17:43 +02:00
|
|
|
Status WriteBatch::Iterate(Handler* handler) const {
|
|
|
|
Slice input(rep_);
|
2016-03-30 19:43:00 +02:00
|
|
|
if (input.size() < WriteBatchInternal::kHeader) {
|
2011-05-21 04:17:43 +02:00
|
|
|
return Status::Corruption("malformed WriteBatch (too small)");
|
|
|
|
}
|
|
|
|
|
2016-03-30 19:43:00 +02:00
|
|
|
input.remove_prefix(WriteBatchInternal::kHeader);
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
Slice key, value, blob, xid;
|
2017-09-29 01:43:04 +02:00
|
|
|
// Sometimes a sub-batch starts with a Noop. We want to exclude such Noops as
|
|
|
|
// the batch boundry sybmols otherwise we would mis-count the number of
|
|
|
|
// batches. We do that by checking whether the accumulated batch is empty
|
|
|
|
// before seeing the next Noop.
|
|
|
|
bool empty_batch = true;
|
2011-05-21 04:17:43 +02:00
|
|
|
int found = 0;
|
2014-02-26 02:30:54 +01:00
|
|
|
Status s;
|
|
|
|
while (s.ok() && !input.empty() && handler->Continue()) {
|
2014-08-19 00:19:17 +02:00
|
|
|
char tag = 0;
|
2014-01-30 00:26:43 +01:00
|
|
|
uint32_t column_family = 0; // default
|
2014-08-19 00:19:17 +02:00
|
|
|
|
|
|
|
s = ReadRecordFromWriteBatch(&input, &tag, &column_family, &key, &value,
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
&blob, &xid);
|
2014-08-19 00:19:17 +02:00
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
2011-05-21 04:17:43 +02:00
|
|
|
switch (tag) {
|
2014-01-07 23:41:42 +01:00
|
|
|
case kTypeColumnFamilyValue:
|
2011-05-21 04:17:43 +02:00
|
|
|
case kTypeValue:
|
2015-11-06 16:03:30 +01:00
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_PUT));
|
2014-08-19 00:19:17 +02:00
|
|
|
s = handler->PutCF(column_family, key, value);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = false;
|
2014-08-19 00:19:17 +02:00
|
|
|
found++;
|
2011-05-21 04:17:43 +02:00
|
|
|
break;
|
2014-01-07 23:41:42 +01:00
|
|
|
case kTypeColumnFamilyDeletion:
|
2011-05-21 04:17:43 +02:00
|
|
|
case kTypeDeletion:
|
2015-11-06 16:03:30 +01:00
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_DELETE));
|
2014-08-19 00:19:17 +02:00
|
|
|
s = handler->DeleteCF(column_family, key);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = false;
|
2014-08-19 00:19:17 +02:00
|
|
|
found++;
|
2011-05-21 04:17:43 +02:00
|
|
|
break;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
case kTypeColumnFamilySingleDeletion:
|
|
|
|
case kTypeSingleDeletion:
|
2015-11-06 16:03:30 +01:00
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_SINGLE_DELETE));
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
s = handler->SingleDeleteCF(column_family, key);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = false;
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
found++;
|
|
|
|
break;
|
2016-08-16 17:16:04 +02:00
|
|
|
case kTypeColumnFamilyRangeDeletion:
|
|
|
|
case kTypeRangeDeletion:
|
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_DELETE_RANGE));
|
|
|
|
s = handler->DeleteRangeCF(column_family, key, value);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = false;
|
2016-08-16 17:16:04 +02:00
|
|
|
found++;
|
|
|
|
break;
|
2014-01-07 23:41:42 +01:00
|
|
|
case kTypeColumnFamilyMerge:
|
2013-03-21 23:59:47 +01:00
|
|
|
case kTypeMerge:
|
2015-11-06 16:03:30 +01:00
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_MERGE));
|
2014-08-19 00:19:17 +02:00
|
|
|
s = handler->MergeCF(column_family, key, value);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = false;
|
2014-08-19 00:19:17 +02:00
|
|
|
found++;
|
2013-03-21 23:59:47 +01:00
|
|
|
break;
|
2017-10-03 18:08:07 +02:00
|
|
|
case kTypeColumnFamilyBlobIndex:
|
|
|
|
case kTypeBlobIndex:
|
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_BLOB_INDEX));
|
|
|
|
s = handler->PutBlobIndexCF(column_family, key, value);
|
|
|
|
found++;
|
|
|
|
break;
|
2013-08-15 01:32:46 +02:00
|
|
|
case kTypeLogData:
|
2014-08-19 00:19:17 +02:00
|
|
|
handler->LogData(blob);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = true;
|
2013-08-15 01:32:46 +02:00
|
|
|
break;
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
case kTypeBeginPrepareXID:
|
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_BEGIN_PREPARE));
|
|
|
|
handler->MarkBeginPrepare();
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = false;
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
break;
|
|
|
|
case kTypeEndPrepareXID:
|
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_END_PREPARE));
|
|
|
|
handler->MarkEndPrepare(xid);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = true;
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
break;
|
|
|
|
case kTypeCommitXID:
|
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_COMMIT));
|
|
|
|
handler->MarkCommit(xid);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = true;
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
break;
|
|
|
|
case kTypeRollbackXID:
|
|
|
|
assert(content_flags_.load(std::memory_order_relaxed) &
|
|
|
|
(ContentFlags::DEFERRED | ContentFlags::HAS_ROLLBACK));
|
|
|
|
handler->MarkRollback(xid);
|
2017-09-29 01:43:04 +02:00
|
|
|
empty_batch = true;
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
break;
|
|
|
|
case kTypeNoop:
|
2017-09-29 01:43:04 +02:00
|
|
|
handler->MarkNoop(empty_batch);
|
|
|
|
empty_batch = true;
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
break;
|
2011-05-21 04:17:43 +02:00
|
|
|
default:
|
|
|
|
return Status::Corruption("unknown WriteBatch tag");
|
|
|
|
}
|
|
|
|
}
|
2014-02-26 02:30:54 +01:00
|
|
|
if (!s.ok()) {
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
if (found != WriteBatchInternal::Count(this)) {
|
2011-05-21 04:17:43 +02:00
|
|
|
return Status::Corruption("WriteBatch has wrong count");
|
|
|
|
} else {
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2011-03-18 23:37:00 +01:00
|
|
|
int WriteBatchInternal::Count(const WriteBatch* b) {
|
|
|
|
return DecodeFixed32(b->rep_.data() + 8);
|
|
|
|
}
|
|
|
|
|
|
|
|
void WriteBatchInternal::SetCount(WriteBatch* b, int n) {
|
|
|
|
EncodeFixed32(&b->rep_[8], n);
|
|
|
|
}
|
|
|
|
|
|
|
|
SequenceNumber WriteBatchInternal::Sequence(const WriteBatch* b) {
|
|
|
|
return SequenceNumber(DecodeFixed64(b->rep_.data()));
|
|
|
|
}
|
|
|
|
|
|
|
|
void WriteBatchInternal::SetSequence(WriteBatch* b, SequenceNumber seq) {
|
|
|
|
EncodeFixed64(&b->rep_[0], seq);
|
|
|
|
}
|
|
|
|
|
2017-07-22 03:13:59 +02:00
|
|
|
size_t WriteBatchInternal::GetFirstOffset(WriteBatch* b) {
|
2016-04-02 00:23:46 +02:00
|
|
|
return WriteBatchInternal::kHeader;
|
2016-03-31 04:56:55 +02:00
|
|
|
}
|
2015-07-11 05:15:45 +02:00
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::Put(WriteBatch* b, uint32_t column_family_id,
|
|
|
|
const Slice& key, const Slice& value) {
|
|
|
|
LocalSavePoint save(b);
|
2014-04-22 20:27:33 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
|
|
|
if (column_family_id == 0) {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeValue));
|
|
|
|
} else {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyValue));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
|
|
|
}
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, key);
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, value);
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(
|
|
|
|
b->content_flags_.load(std::memory_order_relaxed) | ContentFlags::HAS_PUT,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2014-04-22 20:27:33 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::Put(ColumnFamilyHandle* column_family, const Slice& key,
|
|
|
|
const Slice& value) {
|
|
|
|
return WriteBatchInternal::Put(this, GetColumnFamilyID(column_family), key,
|
|
|
|
value);
|
2014-04-22 20:27:33 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::Put(WriteBatch* b, uint32_t column_family_id,
|
|
|
|
const SliceParts& key, const SliceParts& value) {
|
|
|
|
LocalSavePoint save(b);
|
2014-04-22 20:27:33 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
2014-01-07 23:41:42 +01:00
|
|
|
if (column_family_id == 0) {
|
2014-04-22 20:27:33 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeValue));
|
2014-01-07 23:41:42 +01:00
|
|
|
} else {
|
2014-04-22 20:27:33 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyValue));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
2014-01-07 23:41:42 +01:00
|
|
|
}
|
2014-04-22 20:27:33 +02:00
|
|
|
PutLengthPrefixedSliceParts(&b->rep_, key);
|
|
|
|
PutLengthPrefixedSliceParts(&b->rep_, value);
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(
|
|
|
|
b->content_flags_.load(std::memory_order_relaxed) | ContentFlags::HAS_PUT,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2011-03-18 23:37:00 +01:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::Put(ColumnFamilyHandle* column_family, const SliceParts& key,
|
|
|
|
const SliceParts& value) {
|
|
|
|
return WriteBatchInternal::Put(this, GetColumnFamilyID(column_family), key,
|
|
|
|
value);
|
2014-04-22 20:27:33 +02:00
|
|
|
}
|
2014-03-14 19:26:13 +01:00
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::InsertNoop(WriteBatch* b) {
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeNoop));
|
2017-04-11 00:38:34 +02:00
|
|
|
return Status::OK();
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::MarkEndPrepare(WriteBatch* b, const Slice& xid) {
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
// a manually constructed batch can only contain one prepare section
|
|
|
|
assert(b->rep_[12] == static_cast<char>(kTypeNoop));
|
|
|
|
|
|
|
|
// all savepoints up to this point are cleared
|
|
|
|
if (b->save_points_ != nullptr) {
|
|
|
|
while (!b->save_points_->stack.empty()) {
|
|
|
|
b->save_points_->stack.pop();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// rewrite noop as begin marker
|
|
|
|
b->rep_[12] = static_cast<char>(kTypeBeginPrepareXID);
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeEndPrepareXID));
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, xid);
|
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_END_PREPARE |
|
|
|
|
ContentFlags::HAS_BEGIN_PREPARE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return Status::OK();
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::MarkCommit(WriteBatch* b, const Slice& xid) {
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeCommitXID));
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, xid);
|
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_COMMIT,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return Status::OK();
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::MarkRollback(WriteBatch* b, const Slice& xid) {
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeRollbackXID));
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, xid);
|
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_ROLLBACK,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return Status::OK();
|
Modification of WriteBatch to support two phase commit
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
2016-04-08 08:35:51 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::Delete(WriteBatch* b, uint32_t column_family_id,
|
|
|
|
const Slice& key) {
|
|
|
|
LocalSavePoint save(b);
|
2014-04-22 20:27:33 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
2014-01-07 23:41:42 +01:00
|
|
|
if (column_family_id == 0) {
|
2014-04-22 20:27:33 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeDeletion));
|
2014-01-07 23:41:42 +01:00
|
|
|
} else {
|
2014-04-22 20:27:33 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyDeletion));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
2014-01-07 23:41:42 +01:00
|
|
|
}
|
2014-04-22 20:27:33 +02:00
|
|
|
PutLengthPrefixedSlice(&b->rep_, key);
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_DELETE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2013-11-07 21:37:58 +01:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::Delete(ColumnFamilyHandle* column_family, const Slice& key) {
|
|
|
|
return WriteBatchInternal::Delete(this, GetColumnFamilyID(column_family),
|
|
|
|
key);
|
2014-07-10 18:31:42 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::Delete(WriteBatch* b, uint32_t column_family_id,
|
|
|
|
const SliceParts& key) {
|
|
|
|
LocalSavePoint save(b);
|
2014-07-10 18:31:42 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
|
|
|
if (column_family_id == 0) {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeDeletion));
|
|
|
|
} else {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyDeletion));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
|
|
|
}
|
|
|
|
PutLengthPrefixedSliceParts(&b->rep_, key);
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_DELETE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2014-07-10 18:31:42 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::Delete(ColumnFamilyHandle* column_family,
|
|
|
|
const SliceParts& key) {
|
|
|
|
return WriteBatchInternal::Delete(this, GetColumnFamilyID(column_family),
|
|
|
|
key);
|
2014-04-22 20:27:33 +02:00
|
|
|
}
|
2014-03-14 19:26:13 +01:00
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::SingleDelete(WriteBatch* b,
|
|
|
|
uint32_t column_family_id,
|
|
|
|
const Slice& key) {
|
|
|
|
LocalSavePoint save(b);
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
|
|
|
if (column_family_id == 0) {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeSingleDeletion));
|
|
|
|
} else {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilySingleDeletion));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
|
|
|
}
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, key);
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_SINGLE_DELETE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::SingleDelete(ColumnFamilyHandle* column_family,
|
|
|
|
const Slice& key) {
|
|
|
|
return WriteBatchInternal::SingleDelete(
|
|
|
|
this, GetColumnFamilyID(column_family), key);
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::SingleDelete(WriteBatch* b,
|
|
|
|
uint32_t column_family_id,
|
|
|
|
const SliceParts& key) {
|
|
|
|
LocalSavePoint save(b);
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
|
|
|
if (column_family_id == 0) {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeSingleDeletion));
|
|
|
|
} else {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilySingleDeletion));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
|
|
|
}
|
|
|
|
PutLengthPrefixedSliceParts(&b->rep_, key);
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_SINGLE_DELETE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::SingleDelete(ColumnFamilyHandle* column_family,
|
|
|
|
const SliceParts& key) {
|
|
|
|
return WriteBatchInternal::SingleDelete(
|
|
|
|
this, GetColumnFamilyID(column_family), key);
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::DeleteRange(WriteBatch* b, uint32_t column_family_id,
|
|
|
|
const Slice& begin_key,
|
|
|
|
const Slice& end_key) {
|
|
|
|
LocalSavePoint save(b);
|
2016-08-16 17:16:04 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
|
|
|
if (column_family_id == 0) {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeRangeDeletion));
|
|
|
|
} else {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyRangeDeletion));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
|
|
|
}
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, begin_key);
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, end_key);
|
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_DELETE_RANGE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2016-08-16 17:16:04 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::DeleteRange(ColumnFamilyHandle* column_family,
|
|
|
|
const Slice& begin_key, const Slice& end_key) {
|
|
|
|
return WriteBatchInternal::DeleteRange(this, GetColumnFamilyID(column_family),
|
|
|
|
begin_key, end_key);
|
2016-08-16 17:16:04 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::DeleteRange(WriteBatch* b, uint32_t column_family_id,
|
|
|
|
const SliceParts& begin_key,
|
|
|
|
const SliceParts& end_key) {
|
|
|
|
LocalSavePoint save(b);
|
2016-08-16 17:16:04 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
|
|
|
if (column_family_id == 0) {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeRangeDeletion));
|
|
|
|
} else {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyRangeDeletion));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
|
|
|
}
|
|
|
|
PutLengthPrefixedSliceParts(&b->rep_, begin_key);
|
|
|
|
PutLengthPrefixedSliceParts(&b->rep_, end_key);
|
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_DELETE_RANGE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2016-08-16 17:16:04 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::DeleteRange(ColumnFamilyHandle* column_family,
|
|
|
|
const SliceParts& begin_key,
|
|
|
|
const SliceParts& end_key) {
|
|
|
|
return WriteBatchInternal::DeleteRange(this, GetColumnFamilyID(column_family),
|
|
|
|
begin_key, end_key);
|
2016-08-16 17:16:04 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::Merge(WriteBatch* b, uint32_t column_family_id,
|
|
|
|
const Slice& key, const Slice& value) {
|
|
|
|
LocalSavePoint save(b);
|
2014-04-22 20:27:33 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
2014-01-07 23:41:42 +01:00
|
|
|
if (column_family_id == 0) {
|
2014-04-22 20:27:33 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeMerge));
|
2014-01-07 23:41:42 +01:00
|
|
|
} else {
|
2014-04-22 20:27:33 +02:00
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyMerge));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
2014-01-07 23:41:42 +01:00
|
|
|
}
|
2014-04-22 20:27:33 +02:00
|
|
|
PutLengthPrefixedSlice(&b->rep_, key);
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, value);
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_MERGE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2011-03-18 23:37:00 +01:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::Merge(ColumnFamilyHandle* column_family, const Slice& key,
|
|
|
|
const Slice& value) {
|
|
|
|
return WriteBatchInternal::Merge(this, GetColumnFamilyID(column_family), key,
|
|
|
|
value);
|
2013-03-21 23:59:47 +01:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::Merge(WriteBatch* b, uint32_t column_family_id,
|
|
|
|
const SliceParts& key,
|
|
|
|
const SliceParts& value) {
|
|
|
|
LocalSavePoint save(b);
|
2015-05-28 01:59:22 +02:00
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
|
|
|
if (column_family_id == 0) {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeMerge));
|
|
|
|
} else {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyMerge));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
|
|
|
}
|
|
|
|
PutLengthPrefixedSliceParts(&b->rep_, key);
|
|
|
|
PutLengthPrefixedSliceParts(&b->rep_, value);
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_MERGE,
|
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2015-05-28 01:59:22 +02:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::Merge(ColumnFamilyHandle* column_family,
|
|
|
|
const SliceParts& key, const SliceParts& value) {
|
|
|
|
return WriteBatchInternal::Merge(this, GetColumnFamilyID(column_family), key,
|
|
|
|
value);
|
2015-05-28 01:59:22 +02:00
|
|
|
}
|
|
|
|
|
2017-10-03 18:08:07 +02:00
|
|
|
Status WriteBatchInternal::PutBlobIndex(WriteBatch* b,
|
|
|
|
uint32_t column_family_id,
|
|
|
|
const Slice& key, const Slice& value) {
|
|
|
|
LocalSavePoint save(b);
|
|
|
|
WriteBatchInternal::SetCount(b, WriteBatchInternal::Count(b) + 1);
|
|
|
|
if (column_family_id == 0) {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeBlobIndex));
|
|
|
|
} else {
|
|
|
|
b->rep_.push_back(static_cast<char>(kTypeColumnFamilyBlobIndex));
|
|
|
|
PutVarint32(&b->rep_, column_family_id);
|
|
|
|
}
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, key);
|
|
|
|
PutLengthPrefixedSlice(&b->rep_, value);
|
|
|
|
b->content_flags_.store(b->content_flags_.load(std::memory_order_relaxed) |
|
|
|
|
ContentFlags::HAS_BLOB_INDEX,
|
|
|
|
std::memory_order_relaxed);
|
|
|
|
return save.commit();
|
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatch::PutLogData(const Slice& blob) {
|
|
|
|
LocalSavePoint save(this);
|
2013-08-15 01:32:46 +02:00
|
|
|
rep_.push_back(static_cast<char>(kTypeLogData));
|
|
|
|
PutLengthPrefixedSlice(&rep_, blob);
|
2017-04-11 00:38:34 +02:00
|
|
|
return save.commit();
|
2013-08-15 01:32:46 +02:00
|
|
|
}
|
2013-03-21 23:59:47 +01:00
|
|
|
|
2015-07-11 05:15:45 +02:00
|
|
|
void WriteBatch::SetSavePoint() {
|
|
|
|
if (save_points_ == nullptr) {
|
|
|
|
save_points_ = new SavePoints();
|
|
|
|
}
|
|
|
|
// Record length and count of current batch of writes.
|
Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 20:31:26 +02:00
|
|
|
save_points_->stack.push(SavePoint(
|
|
|
|
GetDataSize(), Count(), content_flags_.load(std::memory_order_relaxed)));
|
2015-07-11 05:15:45 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
Status WriteBatch::RollbackToSavePoint() {
|
|
|
|
if (save_points_ == nullptr || save_points_->stack.size() == 0) {
|
|
|
|
return Status::NotFound();
|
|
|
|
}
|
|
|
|
|
|
|
|
// Pop the most recent savepoint off the stack
|
|
|
|
SavePoint savepoint = save_points_->stack.top();
|
|
|
|
save_points_->stack.pop();
|
|
|
|
|
|
|
|
assert(savepoint.size <= rep_.size());
|
2015-11-06 16:03:30 +01:00
|
|
|
assert(savepoint.count <= Count());
|
2015-07-11 05:15:45 +02:00
|
|
|
|
|
|
|
if (savepoint.size == rep_.size()) {
|
|
|
|
// No changes to rollback
|
|
|
|
} else if (savepoint.size == 0) {
|
|
|
|
// Rollback everything
|
|
|
|
Clear();
|
|
|
|
} else {
|
|
|
|
rep_.resize(savepoint.size);
|
|
|
|
WriteBatchInternal::SetCount(this, savepoint.count);
|
2015-11-06 16:03:30 +01:00
|
|
|
content_flags_.store(savepoint.content_flags, std::memory_order_relaxed);
|
2015-07-11 05:15:45 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2017-05-03 19:54:07 +02:00
|
|
|
Status WriteBatch::PopSavePoint() {
|
|
|
|
if (save_points_ == nullptr || save_points_->stack.size() == 0) {
|
|
|
|
return Status::NotFound();
|
|
|
|
}
|
|
|
|
|
|
|
|
// Pop the most recent savepoint off the stack
|
|
|
|
save_points_->stack.pop();
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2011-05-21 04:17:43 +02:00
|
|
|
class MemTableInserter : public WriteBatch::Handler {
|
2017-03-22 19:07:52 +01:00
|
|
|
|
2011-05-21 04:17:43 +02:00
|
|
|
SequenceNumber sequence_;
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
ColumnFamilyMemTables* const cf_mems_;
|
|
|
|
FlushScheduler* const flush_scheduler_;
|
|
|
|
const bool ignore_missing_column_families_;
|
2016-04-18 20:11:51 +02:00
|
|
|
const uint64_t recovering_log_number_;
|
|
|
|
// log number that all Memtables inserted into should reference
|
|
|
|
uint64_t log_number_ref_;
|
2013-07-13 01:56:52 +02:00
|
|
|
DBImpl* db_;
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
const bool concurrent_memtable_writes_;
|
2017-03-22 19:07:52 +01:00
|
|
|
bool post_info_created_;
|
|
|
|
|
Ignore stale logs while restarting DBs
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.
This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.
In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.
Test Plan: Add two unit tests that fail without the fix.
Reviewers: IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60891
2016-07-19 20:48:00 +02:00
|
|
|
bool* has_valid_writes_;
|
2017-03-22 19:07:52 +01:00
|
|
|
// On some (!) platforms just default creating
|
|
|
|
// a map is too expensive in the Write() path as they
|
|
|
|
// cause memory allocations though unused.
|
|
|
|
// Make creation optional but do not incur
|
|
|
|
// unique_ptr additional allocation
|
2017-10-03 05:40:23 +02:00
|
|
|
using MemPostInfoMap = std::map<MemTable*, MemTablePostProcessInfo>;
|
|
|
|
using PostMapType = std::aligned_storage<sizeof(MemPostInfoMap)>::type;
|
2017-03-22 19:07:52 +01:00
|
|
|
PostMapType mem_post_info_map_;
|
2016-04-18 20:11:51 +02:00
|
|
|
// current recovered transaction we are rebuilding (recovery)
|
|
|
|
WriteBatch* rebuilding_trx_;
|
2017-09-29 01:43:04 +02:00
|
|
|
SequenceNumber rebuilding_trx_seq_;
|
2017-09-18 23:36:53 +02:00
|
|
|
// Increase seq number once per each write batch. Otherwise increase it once
|
|
|
|
// per key.
|
|
|
|
bool seq_per_batch_;
|
2017-09-29 01:43:04 +02:00
|
|
|
// Whether the memtable write will be done only after the commit
|
|
|
|
bool write_after_commit_;
|
2011-05-21 04:17:43 +02:00
|
|
|
|
2017-03-22 19:07:52 +01:00
|
|
|
MemPostInfoMap& GetPostMap() {
|
|
|
|
assert(concurrent_memtable_writes_);
|
|
|
|
if(!post_info_created_) {
|
|
|
|
new (&mem_post_info_map_) MemPostInfoMap();
|
|
|
|
post_info_created_ = true;
|
|
|
|
}
|
|
|
|
return *reinterpret_cast<MemPostInfoMap*>(&mem_post_info_map_);
|
|
|
|
}
|
|
|
|
|
2017-09-18 23:36:53 +02:00
|
|
|
public:
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
// cf_mems should not be shared with concurrent inserters
|
2017-09-18 23:36:53 +02:00
|
|
|
MemTableInserter(SequenceNumber _sequence, ColumnFamilyMemTables* cf_mems,
|
|
|
|
FlushScheduler* flush_scheduler,
|
|
|
|
bool ignore_missing_column_families,
|
|
|
|
uint64_t recovering_log_number, DB* db,
|
|
|
|
bool concurrent_memtable_writes,
|
|
|
|
bool* has_valid_writes = nullptr, bool seq_per_batch = false)
|
|
|
|
: sequence_(_sequence),
|
|
|
|
cf_mems_(cf_mems),
|
|
|
|
flush_scheduler_(flush_scheduler),
|
|
|
|
ignore_missing_column_families_(ignore_missing_column_families),
|
|
|
|
recovering_log_number_(recovering_log_number),
|
|
|
|
log_number_ref_(0),
|
|
|
|
db_(reinterpret_cast<DBImpl*>(db)),
|
|
|
|
concurrent_memtable_writes_(concurrent_memtable_writes),
|
|
|
|
post_info_created_(false),
|
|
|
|
has_valid_writes_(has_valid_writes),
|
|
|
|
rebuilding_trx_(nullptr),
|
2017-09-29 01:43:04 +02:00
|
|
|
seq_per_batch_(seq_per_batch),
|
|
|
|
// Write after commit currently uses one seq per key (instead of per
|
|
|
|
// batch). So seq_per_batch being false indicates write_after_commit
|
|
|
|
// approach.
|
|
|
|
write_after_commit_(!seq_per_batch) {
|
2017-09-18 23:36:53 +02:00
|
|
|
assert(cf_mems_);
|
2014-01-28 20:05:04 +01:00
|
|
|
}
|
|
|
|
|
2017-03-22 19:07:52 +01:00
|
|
|
~MemTableInserter() {
|
|
|
|
if (post_info_created_) {
|
|
|
|
reinterpret_cast<MemPostInfoMap*>
|
|
|
|
(&mem_post_info_map_)->~MemPostInfoMap();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
MemTableInserter(const MemTableInserter&) = delete;
|
|
|
|
MemTableInserter& operator=(const MemTableInserter&) = delete;
|
|
|
|
|
2017-09-18 23:36:53 +02:00
|
|
|
void MaybeAdvanceSeq(bool batch_boundry = false) {
|
|
|
|
if (batch_boundry == seq_per_batch_) {
|
|
|
|
sequence_++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-04-18 20:11:51 +02:00
|
|
|
void set_log_number_ref(uint64_t log) { log_number_ref_ = log; }
|
|
|
|
|
2017-05-31 19:45:47 +02:00
|
|
|
SequenceNumber sequence() const { return sequence_; }
|
[rocksdb] Recovery path sequence miscount fix
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
2016-05-04 23:02:27 +02:00
|
|
|
|
2016-07-07 23:45:29 +02:00
|
|
|
void PostProcess() {
|
2017-03-22 19:07:52 +01:00
|
|
|
assert(concurrent_memtable_writes_);
|
|
|
|
// If post info was not created there is nothing
|
|
|
|
// to process and no need to create on demand
|
|
|
|
if(post_info_created_) {
|
|
|
|
for (auto& pair : GetPostMap()) {
|
|
|
|
pair.first->BatchPostProcess(pair.second);
|
|
|
|
}
|
2016-07-07 23:45:29 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-03-03 23:30:36 +01:00
|
|
|
bool SeekToColumnFamily(uint32_t column_family_id, Status* s) {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
// If we are in a concurrent mode, it is the caller's responsibility
|
|
|
|
// to clone the original ColumnFamilyMemTables so that each thread
|
|
|
|
// has its own instance. Otherwise, it must be guaranteed that there
|
|
|
|
// is no concurrent access
|
2014-02-06 01:02:48 +01:00
|
|
|
bool found = cf_mems_->Seek(column_family_id);
|
2014-09-02 22:29:05 +02:00
|
|
|
if (!found) {
|
|
|
|
if (ignore_missing_column_families_) {
|
|
|
|
*s = Status::OK();
|
|
|
|
} else {
|
|
|
|
*s = Status::InvalidArgument(
|
|
|
|
"Invalid column family specified in write batch");
|
|
|
|
}
|
|
|
|
return false;
|
|
|
|
}
|
2016-04-18 20:11:51 +02:00
|
|
|
if (recovering_log_number_ != 0 &&
|
|
|
|
recovering_log_number_ < cf_mems_->GetLogNumber()) {
|
|
|
|
// This is true only in recovery environment (recovering_log_number_ is
|
|
|
|
// always 0 in
|
2014-09-02 22:29:05 +02:00
|
|
|
// non-recovery, regular write code-path)
|
2016-04-18 20:11:51 +02:00
|
|
|
// * If recovering_log_number_ < cf_mems_->GetLogNumber(), this means that
|
|
|
|
// column
|
2014-03-03 23:30:36 +01:00
|
|
|
// family already contains updates from this log. We can't apply updates
|
|
|
|
// twice because of update-in-place or merge workloads -- ignore the
|
|
|
|
// update
|
|
|
|
*s = Status::OK();
|
|
|
|
return false;
|
|
|
|
}
|
2016-04-18 20:11:51 +02:00
|
|
|
|
Ignore stale logs while restarting DBs
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.
This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.
In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.
Test Plan: Add two unit tests that fail without the fix.
Reviewers: IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60891
2016-07-19 20:48:00 +02:00
|
|
|
if (has_valid_writes_ != nullptr) {
|
|
|
|
*has_valid_writes_ = true;
|
|
|
|
}
|
|
|
|
|
2016-04-18 20:11:51 +02:00
|
|
|
if (log_number_ref_ > 0) {
|
|
|
|
cf_mems_->GetMemTable()->RefLogContainingPrepSection(log_number_ref_);
|
|
|
|
}
|
|
|
|
|
2014-03-03 23:30:36 +01:00
|
|
|
return true;
|
|
|
|
}
|
2015-11-06 16:29:10 +01:00
|
|
|
|
2017-10-03 18:08:07 +02:00
|
|
|
Status PutCFImpl(uint32_t column_family_id, const Slice& key,
|
|
|
|
const Slice& value, ValueType value_type) {
|
2016-05-05 21:48:52 +02:00
|
|
|
if (rebuilding_trx_ != nullptr) {
|
|
|
|
WriteBatchInternal::Put(rebuilding_trx_, column_family_id, key, value);
|
2017-09-29 01:43:04 +02:00
|
|
|
if (write_after_commit_) {
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
// else insert the values to the memtable right away
|
2016-05-05 21:48:52 +02:00
|
|
|
}
|
|
|
|
|
2014-03-03 23:30:36 +01:00
|
|
|
Status seek_status;
|
|
|
|
if (!SeekToColumnFamily(column_family_id, &seek_status)) {
|
2017-09-18 23:36:53 +02:00
|
|
|
MaybeAdvanceSeq();
|
2014-03-03 23:30:36 +01:00
|
|
|
return seek_status;
|
2014-01-28 20:05:04 +01:00
|
|
|
}
|
2016-04-18 20:11:51 +02:00
|
|
|
|
2014-02-06 01:02:48 +01:00
|
|
|
MemTable* mem = cf_mems_->GetMemTable();
|
2014-09-09 03:46:52 +02:00
|
|
|
auto* moptions = mem->GetMemTableOptions();
|
|
|
|
if (!moptions->inplace_update_support) {
|
2017-10-03 18:08:07 +02:00
|
|
|
mem->Add(sequence_, value_type, key, value, concurrent_memtable_writes_,
|
2016-07-07 23:45:29 +02:00
|
|
|
get_post_process_info(mem));
|
2014-09-09 03:46:52 +02:00
|
|
|
} else if (moptions->inplace_callback == nullptr) {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
assert(!concurrent_memtable_writes_);
|
2014-02-07 00:42:16 +01:00
|
|
|
mem->Update(sequence_, key, value);
|
In-place updates for equal keys and similar sized values
Summary:
Currently for each put, a fresh memory is allocated, and a new entry is added to the memtable with a new sequence number irrespective of whether the key already exists in the memtable. This diff is an attempt to update the value inplace for existing keys. It currently handles a very simple case:
1. Key already exists in the current memtable. Does not inplace update values in immutable memtable or snapshot
2. Latest value type is a 'put' ie kTypeValue
3. New value size is less than existing value, to avoid reallocating memory
TODO: For a put of an existing key, deallocate memory take by values, for other value types till a kTypeValue is found, ie. remove kTypeMerge.
TODO: Update the transaction log, to allow consistent reload of the memtable.
Test Plan: Added a unit test verifying the inplace update. But some other unit tests broken due to invalid sequence number checks. WIll fix them next.
Reviewers: xinyaohu, sumeet, haobo, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12423
Automatic commit by arc
2013-08-19 23:12:47 +02:00
|
|
|
} else {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
assert(!concurrent_memtable_writes_);
|
2014-09-09 03:46:52 +02:00
|
|
|
if (mem->UpdateCallback(sequence_, key, value)) {
|
2014-01-14 16:55:16 +01:00
|
|
|
} else {
|
Allow callback to change size of existing value. Change return type of the callback function to an enum status to handle 3 cases.
Summary:
This diff fixes 2 hacks:
* The callback function can modify the existing value inplace, if the merged value fits within the existing buffer size. But currently the existing buffer size is not being modified. Now the callback recieves a int* allowing the size to be modified. Since size is encoded as a varint in the internal key for memtable. It might happen that the entire value might have be copied to the new location if the new size varint is smaller than the existing size varint.
* The callback function has 3 functionalities
1. Modify existing buffer inplace, and update size correspondingly. Now to indicate that, Returns 1.
2. Generate a new buffer indicating merged value. Returns 2.
3. Fails to do either of above, based on whatever application logic. Returns 0.
Test Plan: Just make all for now. I'm adding another unit test to test each scenario.
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb, sdong, kailiu, xinyaohu, sumeet, danguo
Differential Revision: https://reviews.facebook.net/D15195
2014-01-17 00:11:19 +01:00
|
|
|
// key not found in memtable. Do sst get, update, add
|
2014-01-14 16:55:16 +01:00
|
|
|
SnapshotImpl read_from_snapshot;
|
|
|
|
read_from_snapshot.number_ = sequence_;
|
|
|
|
ReadOptions ropts;
|
2017-10-03 05:40:23 +02:00
|
|
|
// it's going to be overwritten for sure, so no point caching data block
|
|
|
|
// containing the old version
|
|
|
|
ropts.fill_cache = false;
|
2014-01-14 16:55:16 +01:00
|
|
|
ropts.snapshot = &read_from_snapshot;
|
|
|
|
|
|
|
|
std::string prev_value;
|
|
|
|
std::string merged_value;
|
2014-02-11 02:04:44 +01:00
|
|
|
|
|
|
|
auto cf_handle = cf_mems_->GetColumnFamilyHandle();
|
2016-09-21 20:05:07 +02:00
|
|
|
Status s = Status::NotSupported();
|
2016-11-10 20:10:23 +01:00
|
|
|
if (db_ != nullptr && recovering_log_number_ == 0) {
|
2016-09-21 20:05:07 +02:00
|
|
|
if (cf_handle == nullptr) {
|
|
|
|
cf_handle = db_->DefaultColumnFamily();
|
|
|
|
}
|
|
|
|
s = db_->Get(ropts, cf_handle, key, &prev_value);
|
2014-02-11 02:04:44 +01:00
|
|
|
}
|
|
|
|
|
2014-01-14 16:55:16 +01:00
|
|
|
char* prev_buffer = const_cast<char*>(prev_value.c_str());
|
2014-11-11 22:47:22 +01:00
|
|
|
uint32_t prev_size = static_cast<uint32_t>(prev_value.size());
|
2014-09-09 03:46:52 +02:00
|
|
|
auto status = moptions->inplace_callback(s.ok() ? prev_buffer : nullptr,
|
|
|
|
s.ok() ? &prev_size : nullptr,
|
|
|
|
value, &merged_value);
|
Allow callback to change size of existing value. Change return type of the callback function to an enum status to handle 3 cases.
Summary:
This diff fixes 2 hacks:
* The callback function can modify the existing value inplace, if the merged value fits within the existing buffer size. But currently the existing buffer size is not being modified. Now the callback recieves a int* allowing the size to be modified. Since size is encoded as a varint in the internal key for memtable. It might happen that the entire value might have be copied to the new location if the new size varint is smaller than the existing size varint.
* The callback function has 3 functionalities
1. Modify existing buffer inplace, and update size correspondingly. Now to indicate that, Returns 1.
2. Generate a new buffer indicating merged value. Returns 2.
3. Fails to do either of above, based on whatever application logic. Returns 0.
Test Plan: Just make all for now. I'm adding another unit test to test each scenario.
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb, sdong, kailiu, xinyaohu, sumeet, danguo
Differential Revision: https://reviews.facebook.net/D15195
2014-01-17 00:11:19 +01:00
|
|
|
if (status == UpdateStatus::UPDATED_INPLACE) {
|
2014-01-14 16:55:16 +01:00
|
|
|
// prev_value is updated in-place with final value.
|
2017-10-03 18:08:07 +02:00
|
|
|
mem->Add(sequence_, value_type, key, Slice(prev_buffer, prev_size));
|
2014-10-27 20:10:13 +01:00
|
|
|
RecordTick(moptions->statistics, NUMBER_KEYS_WRITTEN);
|
Allow callback to change size of existing value. Change return type of the callback function to an enum status to handle 3 cases.
Summary:
This diff fixes 2 hacks:
* The callback function can modify the existing value inplace, if the merged value fits within the existing buffer size. But currently the existing buffer size is not being modified. Now the callback recieves a int* allowing the size to be modified. Since size is encoded as a varint in the internal key for memtable. It might happen that the entire value might have be copied to the new location if the new size varint is smaller than the existing size varint.
* The callback function has 3 functionalities
1. Modify existing buffer inplace, and update size correspondingly. Now to indicate that, Returns 1.
2. Generate a new buffer indicating merged value. Returns 2.
3. Fails to do either of above, based on whatever application logic. Returns 0.
Test Plan: Just make all for now. I'm adding another unit test to test each scenario.
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb, sdong, kailiu, xinyaohu, sumeet, danguo
Differential Revision: https://reviews.facebook.net/D15195
2014-01-17 00:11:19 +01:00
|
|
|
} else if (status == UpdateStatus::UPDATED) {
|
|
|
|
// merged_value contains the final value.
|
2017-10-03 18:08:07 +02:00
|
|
|
mem->Add(sequence_, value_type, key, Slice(merged_value));
|
2014-10-27 20:10:13 +01:00
|
|
|
RecordTick(moptions->statistics, NUMBER_KEYS_WRITTEN);
|
2014-01-14 16:55:16 +01:00
|
|
|
}
|
|
|
|
}
|
In-place updates for equal keys and similar sized values
Summary:
Currently for each put, a fresh memory is allocated, and a new entry is added to the memtable with a new sequence number irrespective of whether the key already exists in the memtable. This diff is an attempt to update the value inplace for existing keys. It currently handles a very simple case:
1. Key already exists in the current memtable. Does not inplace update values in immutable memtable or snapshot
2. Latest value type is a 'put' ie kTypeValue
3. New value size is less than existing value, to avoid reallocating memory
TODO: For a put of an existing key, deallocate memory take by values, for other value types till a kTypeValue is found, ie. remove kTypeMerge.
TODO: Update the transaction log, to allow consistent reload of the memtable.
Test Plan: Added a unit test verifying the inplace update. But some other unit tests broken due to invalid sequence number checks. WIll fix them next.
Reviewers: xinyaohu, sumeet, haobo, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12423
Automatic commit by arc
2013-08-19 23:12:47 +02:00
|
|
|
}
|
Allow callback to change size of existing value. Change return type of the callback function to an enum status to handle 3 cases.
Summary:
This diff fixes 2 hacks:
* The callback function can modify the existing value inplace, if the merged value fits within the existing buffer size. But currently the existing buffer size is not being modified. Now the callback recieves a int* allowing the size to be modified. Since size is encoded as a varint in the internal key for memtable. It might happen that the entire value might have be copied to the new location if the new size varint is smaller than the existing size varint.
* The callback function has 3 functionalities
1. Modify existing buffer inplace, and update size correspondingly. Now to indicate that, Returns 1.
2. Generate a new buffer indicating merged value. Returns 2.
3. Fails to do either of above, based on whatever application logic. Returns 0.
Test Plan: Just make all for now. I'm adding another unit test to test each scenario.
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb, sdong, kailiu, xinyaohu, sumeet, danguo
Differential Revision: https://reviews.facebook.net/D15195
2014-01-17 00:11:19 +01:00
|
|
|
// Since all Puts are logged in trasaction logs (if enabled), always bump
|
|
|
|
// sequence number. Even if the update eventually fails and does not result
|
|
|
|
// in memtable add/update.
|
2017-09-18 23:36:53 +02:00
|
|
|
MaybeAdvanceSeq();
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
CheckMemtableFull();
|
2014-02-26 02:30:54 +01:00
|
|
|
return Status::OK();
|
2011-03-18 23:37:00 +01:00
|
|
|
}
|
2014-01-14 16:55:16 +01:00
|
|
|
|
2017-10-03 18:08:07 +02:00
|
|
|
virtual Status PutCF(uint32_t column_family_id, const Slice& key,
|
|
|
|
const Slice& value) override {
|
|
|
|
return PutCFImpl(column_family_id, key, value, kTypeValue);
|
|
|
|
}
|
|
|
|
|
2017-07-22 03:13:59 +02:00
|
|
|
Status DeleteImpl(uint32_t column_family_id, const Slice& key,
|
2016-08-16 17:16:04 +02:00
|
|
|
const Slice& value, ValueType delete_type) {
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
MemTable* mem = cf_mems_->GetMemTable();
|
2016-08-16 17:16:04 +02:00
|
|
|
mem->Add(sequence_, delete_type, key, value, concurrent_memtable_writes_,
|
2016-07-07 23:45:29 +02:00
|
|
|
get_post_process_info(mem));
|
2017-09-18 23:36:53 +02:00
|
|
|
MaybeAdvanceSeq();
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
CheckMemtableFull();
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
2015-11-06 16:29:10 +01:00
|
|
|
virtual Status DeleteCF(uint32_t column_family_id,
|
|
|
|
const Slice& key) override {
|
2016-05-05 21:48:52 +02:00
|
|
|
if (rebuilding_trx_ != nullptr) {
|
|
|
|
WriteBatchInternal::Delete(rebuilding_trx_, column_family_id, key);
|
2017-09-29 01:43:04 +02:00
|
|
|
if (write_after_commit_) {
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
// else insert the values to the memtable right away
|
2016-05-05 21:48:52 +02:00
|
|
|
}
|
|
|
|
|
2016-04-18 20:11:51 +02:00
|
|
|
Status seek_status;
|
|
|
|
if (!SeekToColumnFamily(column_family_id, &seek_status)) {
|
2017-09-18 23:36:53 +02:00
|
|
|
MaybeAdvanceSeq();
|
2016-04-18 20:11:51 +02:00
|
|
|
return seek_status;
|
|
|
|
}
|
|
|
|
|
2016-08-16 17:16:04 +02:00
|
|
|
return DeleteImpl(column_family_id, key, Slice(), kTypeDeletion);
|
2015-11-06 16:29:10 +01:00
|
|
|
}
|
|
|
|
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
virtual Status SingleDeleteCF(uint32_t column_family_id,
|
|
|
|
const Slice& key) override {
|
2016-05-05 21:48:52 +02:00
|
|
|
if (rebuilding_trx_ != nullptr) {
|
|
|
|
WriteBatchInternal::SingleDelete(rebuilding_trx_, column_family_id, key);
|
2017-09-29 01:43:04 +02:00
|
|
|
if (write_after_commit_) {
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
// else insert the values to the memtable right away
|
2016-05-05 21:48:52 +02:00
|
|
|
}
|
|
|
|
|
2016-04-18 20:11:51 +02:00
|
|
|
Status seek_status;
|
|
|
|
if (!SeekToColumnFamily(column_family_id, &seek_status)) {
|
2017-09-18 23:36:53 +02:00
|
|
|
MaybeAdvanceSeq();
|
2016-04-18 20:11:51 +02:00
|
|
|
return seek_status;
|
|
|
|
}
|
|
|
|
|
2016-08-16 17:16:04 +02:00
|
|
|
return DeleteImpl(column_family_id, key, Slice(), kTypeSingleDeletion);
|
|
|
|
}
|
|
|
|
|
|
|
|
virtual Status DeleteRangeCF(uint32_t column_family_id,
|
|
|
|
const Slice& begin_key,
|
|
|
|
const Slice& end_key) override {
|
|
|
|
if (rebuilding_trx_ != nullptr) {
|
|
|
|
WriteBatchInternal::DeleteRange(rebuilding_trx_, column_family_id,
|
|
|
|
begin_key, end_key);
|
2017-09-29 01:43:04 +02:00
|
|
|
if (write_after_commit_) {
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
// else insert the values to the memtable right away
|
2016-08-16 17:16:04 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
Status seek_status;
|
|
|
|
if (!SeekToColumnFamily(column_family_id, &seek_status)) {
|
2017-09-18 23:36:53 +02:00
|
|
|
MaybeAdvanceSeq();
|
2016-08-16 17:16:04 +02:00
|
|
|
return seek_status;
|
|
|
|
}
|
2016-11-16 00:18:56 +01:00
|
|
|
if (db_ != nullptr) {
|
|
|
|
auto cf_handle = cf_mems_->GetColumnFamilyHandle();
|
|
|
|
if (cf_handle == nullptr) {
|
|
|
|
cf_handle = db_->DefaultColumnFamily();
|
|
|
|
}
|
|
|
|
auto* cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(cf_handle)->cfd();
|
|
|
|
if (!cfd->is_delete_range_supported()) {
|
|
|
|
return Status::NotSupported(
|
|
|
|
std::string("DeleteRange not supported for table type ") +
|
|
|
|
cfd->ioptions()->table_factory->Name() + " in CF " +
|
|
|
|
cfd->GetName());
|
|
|
|
}
|
|
|
|
}
|
2016-08-16 17:16:04 +02:00
|
|
|
|
|
|
|
return DeleteImpl(column_family_id, begin_key, end_key, kTypeRangeDeletion);
|
Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 20:42:56 +02:00
|
|
|
}
|
|
|
|
|
2014-02-26 02:30:54 +01:00
|
|
|
virtual Status MergeCF(uint32_t column_family_id, const Slice& key,
|
2015-02-26 20:28:41 +01:00
|
|
|
const Slice& value) override {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
assert(!concurrent_memtable_writes_);
|
2016-05-05 21:48:52 +02:00
|
|
|
if (rebuilding_trx_ != nullptr) {
|
|
|
|
WriteBatchInternal::Merge(rebuilding_trx_, column_family_id, key, value);
|
2017-09-29 01:43:04 +02:00
|
|
|
if (write_after_commit_) {
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
// else insert the values to the memtable right away
|
2016-05-05 21:48:52 +02:00
|
|
|
}
|
|
|
|
|
2014-03-03 23:30:36 +01:00
|
|
|
Status seek_status;
|
|
|
|
if (!SeekToColumnFamily(column_family_id, &seek_status)) {
|
2017-09-18 23:36:53 +02:00
|
|
|
MaybeAdvanceSeq();
|
2014-03-03 23:30:36 +01:00
|
|
|
return seek_status;
|
2014-01-28 20:05:04 +01:00
|
|
|
}
|
2016-05-05 21:48:52 +02:00
|
|
|
|
2014-02-06 01:02:48 +01:00
|
|
|
MemTable* mem = cf_mems_->GetMemTable();
|
2014-09-09 03:46:52 +02:00
|
|
|
auto* moptions = mem->GetMemTableOptions();
|
2014-01-11 02:33:56 +01:00
|
|
|
bool perform_merge = false;
|
|
|
|
|
2016-09-21 20:05:07 +02:00
|
|
|
// If we pass DB through and options.max_successive_merges is hit
|
|
|
|
// during recovery, Get() will be issued which will try to acquire
|
|
|
|
// DB mutex and cause deadlock, as DB mutex is already held.
|
|
|
|
// So we disable merge in recovery
|
|
|
|
if (moptions->max_successive_merges > 0 && db_ != nullptr &&
|
|
|
|
recovering_log_number_ == 0) {
|
2014-01-11 02:33:56 +01:00
|
|
|
LookupKey lkey(key, sequence_);
|
|
|
|
|
|
|
|
// Count the number of successive merges at the head
|
|
|
|
// of the key in the memtable
|
2014-01-28 20:05:04 +01:00
|
|
|
size_t num_merges = mem->CountSuccessiveMergeEntries(lkey);
|
2014-01-11 02:33:56 +01:00
|
|
|
|
2014-09-09 03:46:52 +02:00
|
|
|
if (num_merges >= moptions->max_successive_merges) {
|
2014-01-11 02:33:56 +01:00
|
|
|
perform_merge = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (perform_merge) {
|
|
|
|
// 1) Get the existing value
|
|
|
|
std::string get_value;
|
|
|
|
|
|
|
|
// Pass in the sequence number so that we also include previous merge
|
|
|
|
// operations in the same batch.
|
|
|
|
SnapshotImpl read_from_snapshot;
|
|
|
|
read_from_snapshot.number_ = sequence_;
|
|
|
|
ReadOptions read_options;
|
|
|
|
read_options.snapshot = &read_from_snapshot;
|
|
|
|
|
2014-02-11 02:04:44 +01:00
|
|
|
auto cf_handle = cf_mems_->GetColumnFamilyHandle();
|
|
|
|
if (cf_handle == nullptr) {
|
|
|
|
cf_handle = db_->DefaultColumnFamily();
|
|
|
|
}
|
|
|
|
db_->Get(read_options, cf_handle, key, &get_value);
|
2014-01-11 02:33:56 +01:00
|
|
|
Slice get_value_slice = Slice(get_value);
|
|
|
|
|
|
|
|
// 2) Apply this merge
|
2014-10-27 20:10:13 +01:00
|
|
|
auto merge_operator = moptions->merge_operator;
|
2014-01-11 02:33:56 +01:00
|
|
|
assert(merge_operator);
|
|
|
|
|
|
|
|
std::string new_value;
|
2015-03-03 19:59:36 +01:00
|
|
|
|
2016-06-14 01:17:26 +02:00
|
|
|
Status merge_status = MergeHelper::TimedFullMerge(
|
Introduce FullMergeV2 (eliminate memcpy from merge operators)
Summary:
This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice>
This diff is stacked on top of D56493 and D56511
In this diff we
- Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future
- Replace std::deque<std::string> with std::vector<Slice> to pass operands
- Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187)
- Allow FullMergeV2 output to be an existing operand
```
[Everything in Memtable | 10K operands | 10 KB each | 1 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 0.607 micros/op 1648235 ops/sec; 16121.2 MB/s
readseq : 0.478 micros/op 2091546 ops/sec; 20457.2 MB/s
readseq : 0.252 micros/op 3972081 ops/sec; 38850.5 MB/s
readseq : 0.237 micros/op 4218328 ops/sec; 41259.0 MB/s
readseq : 0.247 micros/op 4043927 ops/sec; 39553.2 MB/s
[master]
readseq : 3.935 micros/op 254140 ops/sec; 2485.7 MB/s
readseq : 3.722 micros/op 268657 ops/sec; 2627.7 MB/s
readseq : 3.149 micros/op 317605 ops/sec; 3106.5 MB/s
readseq : 3.125 micros/op 320024 ops/sec; 3130.1 MB/s
readseq : 4.075 micros/op 245374 ops/sec; 2400.0 MB/s
```
```
[Everything in Memtable | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000
[FullMergeV2]
readseq : 3.472 micros/op 288018 ops/sec; 2817.1 MB/s
readseq : 2.304 micros/op 434027 ops/sec; 4245.2 MB/s
readseq : 1.163 micros/op 859845 ops/sec; 8410.0 MB/s
readseq : 1.192 micros/op 838926 ops/sec; 8205.4 MB/s
readseq : 1.250 micros/op 800000 ops/sec; 7824.7 MB/s
[master]
readseq : 24.025 micros/op 41623 ops/sec; 407.1 MB/s
readseq : 18.489 micros/op 54086 ops/sec; 529.0 MB/s
readseq : 18.693 micros/op 53495 ops/sec; 523.2 MB/s
readseq : 23.621 micros/op 42335 ops/sec; 414.1 MB/s
readseq : 18.775 micros/op 53262 ops/sec; 521.0 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 1 operand per key]
[FullMergeV2]
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
readseq : 14.741 micros/op 67837 ops/sec; 663.5 MB/s
readseq : 1.029 micros/op 971446 ops/sec; 9501.6 MB/s
readseq : 0.974 micros/op 1026229 ops/sec; 10037.4 MB/s
readseq : 0.965 micros/op 1036080 ops/sec; 10133.8 MB/s
readseq : 0.943 micros/op 1060657 ops/sec; 10374.2 MB/s
[master]
readseq : 16.735 micros/op 59755 ops/sec; 584.5 MB/s
readseq : 3.029 micros/op 330151 ops/sec; 3229.2 MB/s
readseq : 3.136 micros/op 318883 ops/sec; 3119.0 MB/s
readseq : 3.065 micros/op 326245 ops/sec; 3191.0 MB/s
readseq : 3.014 micros/op 331813 ops/sec; 3245.4 MB/s
```
```
[Everything in Block cache | 10K operands | 10 KB each | 10 operand per key]
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
[FullMergeV2]
readseq : 24.325 micros/op 41109 ops/sec; 402.1 MB/s
readseq : 1.470 micros/op 680272 ops/sec; 6653.7 MB/s
readseq : 1.231 micros/op 812347 ops/sec; 7945.5 MB/s
readseq : 1.091 micros/op 916590 ops/sec; 8965.1 MB/s
readseq : 1.109 micros/op 901713 ops/sec; 8819.6 MB/s
[master]
readseq : 27.257 micros/op 36687 ops/sec; 358.8 MB/s
readseq : 4.443 micros/op 225073 ops/sec; 2201.4 MB/s
readseq : 5.830 micros/op 171526 ops/sec; 1677.7 MB/s
readseq : 4.173 micros/op 239635 ops/sec; 2343.8 MB/s
readseq : 4.150 micros/op 240963 ops/sec; 2356.8 MB/s
```
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: lovro, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 18:49:03 +02:00
|
|
|
merge_operator, key, &get_value_slice, {value}, &new_value,
|
2016-06-14 01:17:26 +02:00
|
|
|
moptions->info_log, moptions->statistics, Env::Default());
|
2014-01-11 02:33:56 +01:00
|
|
|
|
2016-06-14 01:17:26 +02:00
|
|
|
if (!merge_status.ok()) {
|
|
|
|
// Failed to merge!
|
2014-07-28 21:05:36 +02:00
|
|
|
// Store the delta in memtable
|
|
|
|
perform_merge = false;
|
2014-01-11 02:33:56 +01:00
|
|
|
} else {
|
|
|
|
// 3) Add value to memtable
|
2014-01-28 20:05:04 +01:00
|
|
|
mem->Add(sequence_, kTypeValue, key, new_value);
|
2014-01-11 02:33:56 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!perform_merge) {
|
|
|
|
// Add merge operator to memtable
|
2014-01-28 20:05:04 +01:00
|
|
|
mem->Add(sequence_, kTypeMerge, key, value);
|
2014-01-11 02:33:56 +01:00
|
|
|
}
|
|
|
|
|
2017-09-18 23:36:53 +02:00
|
|
|
MaybeAdvanceSeq();
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
CheckMemtableFull();
|
2014-02-26 02:30:54 +01:00
|
|
|
return Status::OK();
|
2013-03-21 23:59:47 +01:00
|
|
|
}
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
|
2017-10-03 18:08:07 +02:00
|
|
|
virtual Status PutBlobIndexCF(uint32_t column_family_id, const Slice& key,
|
|
|
|
const Slice& value) override {
|
|
|
|
// Same as PutCF except for value type.
|
|
|
|
return PutCFImpl(column_family_id, key, value, kTypeBlobIndex);
|
|
|
|
}
|
|
|
|
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
void CheckMemtableFull() {
|
|
|
|
if (flush_scheduler_ != nullptr) {
|
|
|
|
auto* cfd = cf_mems_->current();
|
|
|
|
assert(cfd != nullptr);
|
|
|
|
if (cfd->mem()->ShouldScheduleFlush() &&
|
|
|
|
cfd->mem()->MarkFlushScheduled()) {
|
|
|
|
// MarkFlushScheduled only returns true if we are the one that
|
|
|
|
// should take action, so no need to dedup further
|
|
|
|
flush_scheduler_->ScheduleFlush(cfd);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2016-04-18 20:11:51 +02:00
|
|
|
|
|
|
|
Status MarkBeginPrepare() override {
|
|
|
|
assert(rebuilding_trx_ == nullptr);
|
|
|
|
assert(db_);
|
|
|
|
|
|
|
|
if (recovering_log_number_ != 0) {
|
|
|
|
// during recovery we rebuild a hollow transaction
|
|
|
|
// from all encountered prepare sections of the wal
|
|
|
|
if (db_->allow_2pc() == false) {
|
|
|
|
return Status::NotSupported(
|
|
|
|
"WAL contains prepared transactions. Open with "
|
|
|
|
"TransactionDB::Open().");
|
|
|
|
}
|
|
|
|
|
|
|
|
// we are now iterating through a prepared section
|
|
|
|
rebuilding_trx_ = new WriteBatch();
|
2017-09-29 01:43:04 +02:00
|
|
|
rebuilding_trx_seq_ = sequence_;
|
Ignore stale logs while restarting DBs
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.
This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.
In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.
Test Plan: Add two unit tests that fail without the fix.
Reviewers: IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60891
2016-07-19 20:48:00 +02:00
|
|
|
if (has_valid_writes_ != nullptr) {
|
|
|
|
*has_valid_writes_ = true;
|
|
|
|
}
|
2016-04-18 20:11:51 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status MarkEndPrepare(const Slice& name) override {
|
|
|
|
assert(db_);
|
|
|
|
assert((rebuilding_trx_ != nullptr) == (recovering_log_number_ != 0));
|
|
|
|
|
|
|
|
if (recovering_log_number_ != 0) {
|
|
|
|
assert(db_->allow_2pc());
|
|
|
|
db_->InsertRecoveredTransaction(recovering_log_number_, name.ToString(),
|
2017-09-29 01:43:04 +02:00
|
|
|
rebuilding_trx_, rebuilding_trx_seq_);
|
2016-04-18 20:11:51 +02:00
|
|
|
rebuilding_trx_ = nullptr;
|
|
|
|
} else {
|
|
|
|
assert(rebuilding_trx_ == nullptr);
|
|
|
|
}
|
2017-09-18 23:36:53 +02:00
|
|
|
const bool batch_boundry = true;
|
|
|
|
MaybeAdvanceSeq(batch_boundry);
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
2016-04-18 20:11:51 +02:00
|
|
|
|
2017-09-29 01:43:04 +02:00
|
|
|
Status MarkNoop(bool empty_batch) override {
|
2017-09-18 23:36:53 +02:00
|
|
|
// A hack in pessimistic transaction could result into a noop at the start
|
|
|
|
// of the write batch, that should be ignored.
|
2017-09-29 01:43:04 +02:00
|
|
|
if (!empty_batch) {
|
2017-09-18 23:36:53 +02:00
|
|
|
// In the absence of Prepare markers, a kTypeNoop tag indicates the end of
|
|
|
|
// a batch. This happens when write batch commits skipping the prepare
|
|
|
|
// phase.
|
|
|
|
const bool batch_boundry = true;
|
|
|
|
MaybeAdvanceSeq(batch_boundry);
|
|
|
|
}
|
2016-04-18 20:11:51 +02:00
|
|
|
return Status::OK();
|
|
|
|
}
|
|
|
|
|
|
|
|
Status MarkCommit(const Slice& name) override {
|
|
|
|
assert(db_);
|
|
|
|
|
|
|
|
Status s;
|
|
|
|
|
|
|
|
if (recovering_log_number_ != 0) {
|
|
|
|
// in recovery when we encounter a commit marker
|
|
|
|
// we lookup this transaction in our set of rebuilt transactions
|
|
|
|
// and commit.
|
|
|
|
auto trx = db_->GetRecoveredTransaction(name.ToString());
|
|
|
|
|
|
|
|
// the log contaiting the prepared section may have
|
|
|
|
// been released in the last incarnation because the
|
|
|
|
// data was flushed to L0
|
|
|
|
if (trx != nullptr) {
|
|
|
|
// at this point individual CF lognumbers will prevent
|
|
|
|
// duplicate re-insertion of values.
|
|
|
|
assert(log_number_ref_ == 0);
|
2017-09-29 01:43:04 +02:00
|
|
|
if (write_after_commit_) {
|
|
|
|
// all insertes must reference this trx log number
|
|
|
|
log_number_ref_ = trx->log_number_;
|
|
|
|
s = trx->batch_->Iterate(this);
|
|
|
|
log_number_ref_ = 0;
|
|
|
|
}
|
|
|
|
// else the values are already inserted before the commit
|
2016-04-18 20:11:51 +02:00
|
|
|
|
|
|
|
if (s.ok()) {
|
|
|
|
db_->DeleteRecoveredTransaction(name.ToString());
|
|
|
|
}
|
Ignore stale logs while restarting DBs
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.
This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.
In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.
Test Plan: Add two unit tests that fail without the fix.
Reviewers: IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60891
2016-07-19 20:48:00 +02:00
|
|
|
if (has_valid_writes_ != nullptr) {
|
|
|
|
*has_valid_writes_ = true;
|
|
|
|
}
|
2016-04-18 20:11:51 +02:00
|
|
|
}
|
|
|
|
} else {
|
2017-09-29 01:43:04 +02:00
|
|
|
// When writes are not delayed until commit, there is no disconnect
|
|
|
|
// between a memtable write and the WAL that supports it. So the commit
|
|
|
|
// need not reference any log as the only log to which it depends.
|
|
|
|
assert(!write_after_commit_ || log_number_ref_ > 0);
|
2016-04-18 20:11:51 +02:00
|
|
|
}
|
2017-09-18 23:36:53 +02:00
|
|
|
const bool batch_boundry = true;
|
|
|
|
MaybeAdvanceSeq(batch_boundry);
|
2016-04-18 20:11:51 +02:00
|
|
|
|
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
|
|
|
Status MarkRollback(const Slice& name) override {
|
|
|
|
assert(db_);
|
|
|
|
|
|
|
|
if (recovering_log_number_ != 0) {
|
|
|
|
auto trx = db_->GetRecoveredTransaction(name.ToString());
|
|
|
|
|
|
|
|
// the log containing the transactions prep section
|
|
|
|
// may have been released in the previous incarnation
|
|
|
|
// because we knew it had been rolled back
|
|
|
|
if (trx != nullptr) {
|
|
|
|
db_->DeleteRecoveredTransaction(name.ToString());
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
// in non recovery we simply ignore this tag
|
|
|
|
}
|
|
|
|
|
|
|
|
return Status::OK();
|
|
|
|
}
|
2016-07-07 23:45:29 +02:00
|
|
|
|
|
|
|
private:
|
|
|
|
MemTablePostProcessInfo* get_post_process_info(MemTable* mem) {
|
|
|
|
if (!concurrent_memtable_writes_) {
|
|
|
|
// No need to batch counters locally if we don't use concurrent mode.
|
|
|
|
return nullptr;
|
|
|
|
}
|
2017-03-22 19:07:52 +01:00
|
|
|
return &GetPostMap()[mem];
|
2016-07-07 23:45:29 +02:00
|
|
|
}
|
2011-05-21 04:17:43 +02:00
|
|
|
};
|
|
|
|
|
2015-01-06 21:44:21 +01:00
|
|
|
// This function can only be called in these conditions:
|
|
|
|
// 1) During Recovery()
|
2015-11-06 16:29:10 +01:00
|
|
|
// 2) During Write(), in a single-threaded write thread
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
// 3) During Write(), in a concurrent context where memtables has been cloned
|
2015-11-06 16:29:10 +01:00
|
|
|
// The reason is that it calls memtables->Seek(), which has a stateful cache
|
2017-09-18 23:36:53 +02:00
|
|
|
Status WriteBatchInternal::InsertInto(
|
|
|
|
WriteThread::WriteGroup& write_group, SequenceNumber sequence,
|
|
|
|
ColumnFamilyMemTables* memtables, FlushScheduler* flush_scheduler,
|
|
|
|
bool ignore_missing_column_families, uint64_t recovery_log_number, DB* db,
|
|
|
|
bool concurrent_memtable_writes, bool seq_per_batch) {
|
support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
2015-08-15 01:59:07 +02:00
|
|
|
MemTableInserter inserter(sequence, memtables, flush_scheduler,
|
2017-04-10 21:37:07 +02:00
|
|
|
ignore_missing_column_families, recovery_log_number,
|
2017-09-18 23:36:53 +02:00
|
|
|
db, concurrent_memtable_writes,
|
|
|
|
nullptr /*has_valid_writes*/, seq_per_batch);
|
2017-05-19 23:24:23 +02:00
|
|
|
for (auto w : write_group) {
|
2016-04-18 20:11:51 +02:00
|
|
|
if (!w->ShouldWriteToMemtable()) {
|
2017-09-29 01:43:04 +02:00
|
|
|
w->sequence = inserter.sequence();
|
2017-10-06 23:18:30 +02:00
|
|
|
inserter.MaybeAdvanceSeq(true);
|
2016-04-18 20:11:51 +02:00
|
|
|
continue;
|
|
|
|
}
|
2017-05-31 19:45:47 +02:00
|
|
|
SetSequence(w->batch, inserter.sequence());
|
2017-08-17 01:49:11 +02:00
|
|
|
w->sequence = inserter.sequence();
|
2016-04-18 20:11:51 +02:00
|
|
|
inserter.set_log_number_ref(w->log_ref);
|
|
|
|
w->status = w->batch->Iterate(&inserter);
|
|
|
|
if (!w->status.ok()) {
|
|
|
|
return w->status;
|
2016-02-05 19:44:13 +01:00
|
|
|
}
|
2015-11-06 16:29:10 +01:00
|
|
|
}
|
2016-02-05 19:44:13 +01:00
|
|
|
return Status::OK();
|
2015-11-06 16:29:10 +01:00
|
|
|
}
|
|
|
|
|
2017-10-06 23:18:30 +02:00
|
|
|
Status WriteBatchInternal::InsertInto(
|
|
|
|
WriteThread::Writer* writer, SequenceNumber sequence,
|
|
|
|
ColumnFamilyMemTables* memtables, FlushScheduler* flush_scheduler,
|
|
|
|
bool ignore_missing_column_families, uint64_t log_number, DB* db,
|
|
|
|
bool concurrent_memtable_writes, bool seq_per_batch) {
|
2017-05-31 19:45:47 +02:00
|
|
|
assert(writer->ShouldWriteToMemtable());
|
|
|
|
MemTableInserter inserter(sequence, memtables, flush_scheduler,
|
2016-04-18 20:11:51 +02:00
|
|
|
ignore_missing_column_families, log_number, db,
|
2017-10-06 23:18:30 +02:00
|
|
|
concurrent_memtable_writes,
|
|
|
|
nullptr /*has_valid_writes*/, seq_per_batch);
|
2017-05-31 19:45:47 +02:00
|
|
|
SetSequence(writer->batch, sequence);
|
2016-04-18 20:11:51 +02:00
|
|
|
inserter.set_log_number_ref(writer->log_ref);
|
2016-07-07 23:45:29 +02:00
|
|
|
Status s = writer->batch->Iterate(&inserter);
|
|
|
|
if (concurrent_memtable_writes) {
|
|
|
|
inserter.PostProcess();
|
|
|
|
}
|
|
|
|
return s;
|
2016-04-18 20:11:51 +02:00
|
|
|
}
|
|
|
|
|
Ignore stale logs while restarting DBs
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.
This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.
In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.
Test Plan: Add two unit tests that fail without the fix.
Reviewers: IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60891
2016-07-19 20:48:00 +02:00
|
|
|
Status WriteBatchInternal::InsertInto(
|
|
|
|
const WriteBatch* batch, ColumnFamilyMemTables* memtables,
|
|
|
|
FlushScheduler* flush_scheduler, bool ignore_missing_column_families,
|
|
|
|
uint64_t log_number, DB* db, bool concurrent_memtable_writes,
|
2017-09-18 23:36:53 +02:00
|
|
|
SequenceNumber* next_seq, bool* has_valid_writes, bool seq_per_batch) {
|
2017-05-31 19:45:47 +02:00
|
|
|
MemTableInserter inserter(Sequence(batch), memtables, flush_scheduler,
|
|
|
|
ignore_missing_column_families, log_number, db,
|
2017-09-18 23:36:53 +02:00
|
|
|
concurrent_memtable_writes, has_valid_writes,
|
|
|
|
seq_per_batch);
|
[rocksdb] Recovery path sequence miscount fix
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
2016-05-04 23:02:27 +02:00
|
|
|
Status s = batch->Iterate(&inserter);
|
2017-09-18 23:36:53 +02:00
|
|
|
if (next_seq != nullptr) {
|
|
|
|
*next_seq = inserter.sequence();
|
[rocksdb] Recovery path sequence miscount fix
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
2016-05-04 23:02:27 +02:00
|
|
|
}
|
2016-07-07 23:45:29 +02:00
|
|
|
if (concurrent_memtable_writes) {
|
|
|
|
inserter.PostProcess();
|
|
|
|
}
|
[rocksdb] Recovery path sequence miscount fix
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
2016-05-04 23:02:27 +02:00
|
|
|
return s;
|
2014-01-28 20:05:04 +01:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::SetContents(WriteBatch* b, const Slice& contents) {
|
2016-03-30 19:43:00 +02:00
|
|
|
assert(contents.size() >= WriteBatchInternal::kHeader);
|
2011-03-18 23:37:00 +01:00
|
|
|
b->rep_.assign(contents.data(), contents.size());
|
2015-11-06 16:03:30 +01:00
|
|
|
b->content_flags_.store(ContentFlags::DEFERRED, std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return Status::OK();
|
2011-03-18 23:37:00 +01:00
|
|
|
}
|
|
|
|
|
2017-04-11 00:38:34 +02:00
|
|
|
Status WriteBatchInternal::Append(WriteBatch* dst, const WriteBatch* src,
|
|
|
|
const bool wal_only) {
|
Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 20:31:26 +02:00
|
|
|
size_t src_len;
|
|
|
|
int src_count;
|
|
|
|
uint32_t src_flags;
|
|
|
|
|
|
|
|
const SavePoint& batch_end = src->GetWalTerminationPoint();
|
|
|
|
|
|
|
|
if (wal_only && !batch_end.is_cleared()) {
|
|
|
|
src_len = batch_end.size - WriteBatchInternal::kHeader;
|
|
|
|
src_count = batch_end.count;
|
|
|
|
src_flags = batch_end.content_flags;
|
|
|
|
} else {
|
|
|
|
src_len = src->rep_.size() - WriteBatchInternal::kHeader;
|
|
|
|
src_count = Count(src);
|
|
|
|
src_flags = src->content_flags_.load(std::memory_order_relaxed);
|
|
|
|
}
|
|
|
|
|
|
|
|
SetCount(dst, Count(dst) + src_count);
|
2016-03-30 19:43:00 +02:00
|
|
|
assert(src->rep_.size() >= WriteBatchInternal::kHeader);
|
Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 20:31:26 +02:00
|
|
|
dst->rep_.append(src->rep_.data() + WriteBatchInternal::kHeader, src_len);
|
2015-11-06 16:03:30 +01:00
|
|
|
dst->content_flags_.store(
|
Add facility to write only a portion of WriteBatch to WAL
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
2016-10-07 20:31:26 +02:00
|
|
|
dst->content_flags_.load(std::memory_order_relaxed) | src_flags,
|
2015-11-06 16:03:30 +01:00
|
|
|
std::memory_order_relaxed);
|
2017-04-11 00:38:34 +02:00
|
|
|
return Status::OK();
|
2012-03-09 01:23:21 +01:00
|
|
|
}
|
|
|
|
|
2015-11-06 16:29:10 +01:00
|
|
|
size_t WriteBatchInternal::AppendedByteSize(size_t leftByteSize,
|
|
|
|
size_t rightByteSize) {
|
|
|
|
if (leftByteSize == 0 || rightByteSize == 0) {
|
|
|
|
return leftByteSize + rightByteSize;
|
|
|
|
} else {
|
2016-03-30 19:43:00 +02:00
|
|
|
return leftByteSize + rightByteSize - WriteBatchInternal::kHeader;
|
2015-11-06 16:29:10 +01:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-10-04 06:49:15 +02:00
|
|
|
} // namespace rocksdb
|