rocksdb/util/bloom_test.cc

1345 lines
45 KiB
C++
Raw Normal View History

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2012 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
2014-05-09 17:34:18 +02:00
#ifndef GFLAGS
#include <cstdio>
int main() {
fprintf(stderr, "Please install gflags to run this test... Skipping...\n");
return 0;
2014-05-09 17:34:18 +02:00
}
#else
#include <array>
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
#include <cmath>
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
#include <vector>
Account Bloom/Ribbon filter construction memory in global memory limit (#9073) Summary: Note: This PR is the 4th part of a bigger PR stack (https://github.com/facebook/rocksdb/pull/9073) and will rebase/merge only after the first three PRs (https://github.com/facebook/rocksdb/pull/9070, https://github.com/facebook/rocksdb/pull/9071, https://github.com/facebook/rocksdb/pull/9130) merge. **Context:** Similar to https://github.com/facebook/rocksdb/pull/8428, this PR is to track memory usage during (new) Bloom Filter (i.e,FastLocalBloom) and Ribbon Filter (i.e, Ribbon128) construction, moving toward the goal of [single global memory limit using block cache capacity](https://github.com/facebook/rocksdb/wiki/Projects-Being-Developed#improving-memory-efficiency). It also constrains the size of the banding portion of Ribbon Filter during construction by falling back to Bloom Filter if that banding is, at some point, larger than the available space in the cache under `LRUCacheOptions::strict_capacity_limit=true`. The option to turn on this feature is `BlockBasedTableOptions::reserve_table_builder_memory = true` which by default is set to `false`. We [decided](https://github.com/facebook/rocksdb/pull/9073#discussion_r741548409) not to have separate option for separate memory user in table building therefore their memory accounting are all bundled under one general option. **Summary:** - Reserved/released cache for creation/destruction of three main memory users with the passed-in `FilterBuildingContext::cache_res_mgr` during filter construction: - hash entries (i.e`hash_entries`.size(), we bucket-charge hash entries during insertion for performance), - banding (Ribbon Filter only, `bytes_coeff_rows` +`bytes_result_rows` + `bytes_backtrack`), - final filter (i.e, `mutable_buf`'s size). - Implementation details: in order to use `CacheReservationManager::CacheReservationHandle` to account final filter's memory, we have to store the `CacheReservationManager` object and `CacheReservationHandle` for final filter in `XXPH3BitsFilterBuilder` as well as explicitly delete the filter bits builder when done with the final filter in block based table. - Added option fo run `filter_bench` with this memory reservation feature Pull Request resolved: https://github.com/facebook/rocksdb/pull/9073 Test Plan: - Added new tests in `db_bloom_filter_test` to verify filter construction peak cache reservation under combination of `BlockBasedTable::Rep::FilterType` (e.g, `kFullFilter`, `kPartitionedFilter`), `BloomFilterPolicy::Mode`(e.g, `kFastLocalBloom`, `kStandard128Ribbon`, `kDeprecatedBlock`) and `BlockBasedTableOptions::reserve_table_builder_memory` - To address the concern for slow test: tests with memory reservation under `kFullFilter` + `kStandard128Ribbon` and `kPartitionedFilter` take around **3000 - 6000 ms** and others take around **1500 - 2000 ms**, in total adding **20000 - 25000 ms** to the test suit running locally - Added new test in `bloom_test` to verify Ribbon Filter fallback on large banding in FullFilter - Added test in `filter_bench` to verify that this feature does not significantly slow down Bloom/Ribbon Filter construction speed. Local result averaged over **20** run as below: - FastLocalBloom - baseline `./filter_bench -impl=2 -quick -runs 20 | grep 'Build avg'`: - **Build avg ns/key: 29.56295** (DEBUG_LEVEL=1), **29.98153** (DEBUG_LEVEL=0) - new feature (expected to be similar as above)`./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg'`: - **Build avg ns/key: 30.99046** (DEBUG_LEVEL=1), **30.48867** (DEBUG_LEVEL=0) - new feature of RibbonFilter with fallback (expected to be similar as above) `./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` : - **Build avg ns/key: 31.146975** (DEBUG_LEVEL=1), **30.08165** (DEBUG_LEVEL=0) - Ribbon128 - baseline `./filter_bench -impl=3 -quick -runs 20 | grep 'Build avg'`: - **Build avg ns/key: 129.17585** (DEBUG_LEVEL=1), **130.5225** (DEBUG_LEVEL=0) - new feature (expected to be similar as above) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg' `: - **Build avg ns/key: 131.61645** (DEBUG_LEVEL=1), **132.98075** (DEBUG_LEVEL=0) - new feature of RibbonFilter with fallback (expected to be a lot faster than above due to fallback) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` : - **Build avg ns/key: 52.032965** (DEBUG_LEVEL=1), **52.597825** (DEBUG_LEVEL=0) - And the warning message of `"Cache reservation for Ribbon filter banding failed due to cache full"` is indeed logged to console. Reviewed By: pdillinger Differential Revision: D31991348 Pulled By: hx235 fbshipit-source-id: 9336b2c60f44d530063da518ceaf56dac5f9df8e
2021-11-18 18:41:10 +01:00
#include "cache/cache_entry_roles.h"
#include "cache/cache_reservation_manager.h"
#include "memory/arena.h"
Minimize memory internal fragmentation for Bloom filters (#6427) Summary: New experimental option BBTO::optimize_filters_for_memory builds filters that maximize their use of "usable size" from malloc_usable_size, which is also used to compute block cache charges. Rather than always "rounding up," we track state in the BloomFilterPolicy object to mix essentially "rounding down" and "rounding up" so that the average FP rate of all generated filters is the same as without the option. (YMMV as heavily accessed filters might be unluckily lower accuracy.) Thus, the option near-minimizes what the block cache considers as "memory used" for a given target Bloom filter false positive rate and Bloom filter implementation. There are no forward or backward compatibility issues with this change, though it only works on the format_version=5 Bloom filter. With Jemalloc, we see about 10% reduction in memory footprint (and block cache charge) for Bloom filters, but 1-2% increase in storage footprint, due to encoding efficiency losses (FP rate is non-linear with bits/key). Why not weighted random round up/down rather than state tracking? By only requiring malloc_usable_size, we don't actually know what the next larger and next smaller usable sizes for the allocator are. We pick a requested size, accept and use whatever usable size it has, and use the difference to inform our next choice. This allows us to narrow in on the right balance without tracking/predicting usable sizes. Why not weight history of generated filter false positive rates by number of keys? This could lead to excess skew in small filters after generating a large filter. Results from filter_bench with jemalloc (irrelevant details omitted): (normal keys/filter, but high variance) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.6278 Number of filters: 5516 Total size (MB): 200.046 Reported total allocated memory (MB): 220.597 Reported internal fragmentation: 10.2732% Bits/key stored: 10.0097 Average FP rate %: 0.965228 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.5104 Number of filters: 5464 Total size (MB): 200.015 Reported total allocated memory (MB): 200.322 Reported internal fragmentation: 0.153709% Bits/key stored: 10.1011 Average FP rate %: 0.966313 (very few keys / filter, optimization not as effective due to ~59 byte internal fragmentation in blocked Bloom filter representation) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.5649 Number of filters: 162950 Total size (MB): 200.001 Reported total allocated memory (MB): 224.624 Reported internal fragmentation: 12.3117% Bits/key stored: 10.2951 Average FP rate %: 0.821534 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 31.8057 Number of filters: 159849 Total size (MB): 200 Reported total allocated memory (MB): 208.846 Reported internal fragmentation: 4.42297% Bits/key stored: 10.4948 Average FP rate %: 0.811006 (high keys/filter) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.7017 Number of filters: 164 Total size (MB): 200.352 Reported total allocated memory (MB): 221.5 Reported internal fragmentation: 10.5552% Bits/key stored: 10.0003 Average FP rate %: 0.969358 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.7131 Number of filters: 160 Total size (MB): 200.928 Reported total allocated memory (MB): 200.938 Reported internal fragmentation: 0.00448054% Bits/key stored: 10.1852 Average FP rate %: 0.963387 And from db_bench (block cache) with jemalloc: $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17063835 $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17430747 $ #^ 2.1% additional filter storage $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8440400 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 21087528 rocksdb.bloom.filter.useful COUNT : 4963889 rocksdb.bloom.filter.full.positive COUNT : 1214081 rocksdb.bloom.filter.full.true.positive COUNT : 1161999 $ #^ 1.04 % observed FP rate $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8448592 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 18220328 rocksdb.bloom.filter.useful COUNT : 5360933 rocksdb.bloom.filter.full.positive COUNT : 1321315 rocksdb.bloom.filter.full.true.positive COUNT : 1262999 $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters (Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427 Test Plan: unit test added, 'make check' with gcc, clang and valgrind Reviewed By: siying Differential Revision: D22124374 Pulled By: pdillinger fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 22:30:57 +02:00
#include "port/jemalloc_helper.h"
#include "rocksdb/filter_policy.h"
#include "table/block_based/filter_policy_internal.h"
#include "test_util/testharness.h"
#include "test_util/testutil.h"
#include "util/gflags_compat.h"
#include "util/hash.h"
using GFLAGS_NAMESPACE::ParseCommandLineFlags;
2014-05-09 17:34:18 +02:00
// The test is not fully designed for bits_per_key other than 10, but with
// this parameter you can easily explore the behavior of other bits_per_key.
// See also filter_bench.
DEFINE_int32(bits_per_key, 10, "");
namespace ROCKSDB_NAMESPACE {
static const int kVerbose = 1;
static Slice Key(int i, char* buffer) {
std::string s;
PutFixed32(&s, static_cast<uint32_t>(i));
memcpy(buffer, s.c_str(), sizeof(i));
return Slice(buffer, sizeof(i));
}
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
static int NextLength(int length) {
if (length < 10) {
length += 1;
} else if (length < 100) {
length += 10;
} else if (length < 1000) {
length += 100;
} else {
length += 1000;
}
return length;
}
class BlockBasedBloomTest : public testing::Test {
private:
std::unique_ptr<const FilterPolicy> policy_;
std::string filter_;
std::vector<std::string> keys_;
public:
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BlockBasedBloomTest() { ResetPolicy(); }
void Reset() {
keys_.clear();
filter_.clear();
}
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
void ResetPolicy(double bits_per_key) {
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
policy_.reset(new BloomFilterPolicy(bits_per_key,
BloomFilterPolicy::kDeprecatedBlock));
Reset();
}
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
void ResetPolicy() { ResetPolicy(FLAGS_bits_per_key); }
void Add(const Slice& s) {
keys_.push_back(s.ToString());
}
void Build() {
std::vector<Slice> key_slices;
for (size_t i = 0; i < keys_.size(); i++) {
key_slices.push_back(Slice(keys_[i]));
}
filter_.clear();
policy_->CreateFilter(&key_slices[0], static_cast<int>(key_slices.size()),
&filter_);
keys_.clear();
if (kVerbose >= 2) DumpFilter();
}
size_t FilterSize() const {
return filter_.size();
}
Slice FilterData() const { return Slice(filter_); }
void DumpFilter() {
fprintf(stderr, "F(");
for (size_t i = 0; i+1 < filter_.size(); i++) {
const unsigned int c = static_cast<unsigned int>(filter_[i]);
for (int j = 0; j < 8; j++) {
fprintf(stderr, "%c", (c & (1 <<j)) ? '1' : '.');
}
}
fprintf(stderr, ")\n");
}
bool Matches(const Slice& s) {
if (!keys_.empty()) {
Build();
}
return policy_->KeyMayMatch(s, filter_);
}
double FalsePositiveRate() {
char buffer[sizeof(int)];
int result = 0;
for (int i = 0; i < 10000; i++) {
if (Matches(Key(i + 1000000000, buffer))) {
result++;
}
}
return result / 10000.0;
}
};
TEST_F(BlockBasedBloomTest, EmptyFilter) {
ASSERT_TRUE(! Matches("hello"));
ASSERT_TRUE(! Matches("world"));
}
TEST_F(BlockBasedBloomTest, Small) {
Add("hello");
Add("world");
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
ASSERT_TRUE(! Matches("x"));
ASSERT_TRUE(! Matches("foo"));
}
TEST_F(BlockBasedBloomTest, VaryingLengths) {
char buffer[sizeof(int)];
// Count number of filters that significantly exceed the false positive rate
int mediocre_filters = 0;
int good_filters = 0;
for (int length = 1; length <= 10000; length = NextLength(length)) {
Reset();
for (int i = 0; i < length; i++) {
Add(Key(i, buffer));
}
Build();
ASSERT_LE(FilterSize(), (size_t)((length * FLAGS_bits_per_key / 8) + 40))
<< length;
// All added keys must match
for (int i = 0; i < length; i++) {
ASSERT_TRUE(Matches(Key(i, buffer)))
<< "Length " << length << "; key " << i;
}
// Check false positive rate
double rate = FalsePositiveRate();
if (kVerbose >= 1) {
fprintf(stderr, "False positives: %5.2f%% @ length = %6d ; bytes = %6d\n",
rate*100.0, length, static_cast<int>(FilterSize()));
}
if (FLAGS_bits_per_key == 10) {
ASSERT_LE(rate, 0.02); // Must not be over 2%
if (rate > 0.0125) {
mediocre_filters++; // Allowed, but not too often
} else {
good_filters++;
}
}
}
if (FLAGS_bits_per_key == 10 && kVerbose >= 1) {
fprintf(stderr, "Filters: %d good, %d mediocre\n",
good_filters, mediocre_filters);
}
ASSERT_LE(mediocre_filters, good_filters/5);
}
// Ensure the implementation doesn't accidentally change in an
// incompatible way
TEST_F(BlockBasedBloomTest, Schema) {
char buffer[sizeof(int)];
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(8); // num_probes = 5
for (int key = 0; key < 87; key++) {
Add(Key(key, buffer));
}
Build();
ASSERT_EQ(BloomHash(FilterData()), 3589896109U);
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(9); // num_probes = 6
for (int key = 0; key < 87; key++) {
Add(Key(key, buffer));
}
Build();
ASSERT_EQ(BloomHash(FilterData()), 969445585U);
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(11); // num_probes = 7
for (int key = 0; key < 87; key++) {
Add(Key(key, buffer));
}
Build();
ASSERT_EQ(BloomHash(FilterData()), 1694458207U);
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(10); // num_probes = 6
for (int key = 0; key < 87; key++) {
Add(Key(key, buffer));
}
Build();
ASSERT_EQ(BloomHash(FilterData()), 2373646410U);
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(10);
for (int key = /*CHANGED*/ 1; key < 87; key++) {
Add(Key(key, buffer));
}
Build();
ASSERT_EQ(BloomHash(FilterData()), 1908442116U);
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(10);
for (int key = 1; key < /*CHANGED*/ 88; key++) {
Add(Key(key, buffer));
}
Build();
ASSERT_EQ(BloomHash(FilterData()), 3057004015U);
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
// With new fractional bits_per_key, check that we are rounding to
// whole bits per key for old Bloom filters.
ResetPolicy(9.5); // Treated as 10
for (int key = 1; key < 88; key++) {
Add(Key(key, buffer));
}
Build();
ASSERT_EQ(BloomHash(FilterData()), /*SAME*/ 3057004015U);
ResetPolicy(10.499); // Treated as 10
for (int key = 1; key < 88; key++) {
Add(Key(key, buffer));
}
Build();
ASSERT_EQ(BloomHash(FilterData()), /*SAME*/ 3057004015U);
ResetPolicy();
}
// Different bits-per-byte
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
class FullBloomTest : public testing::TestWithParam<BloomFilterPolicy::Mode> {
Minimize memory internal fragmentation for Bloom filters (#6427) Summary: New experimental option BBTO::optimize_filters_for_memory builds filters that maximize their use of "usable size" from malloc_usable_size, which is also used to compute block cache charges. Rather than always "rounding up," we track state in the BloomFilterPolicy object to mix essentially "rounding down" and "rounding up" so that the average FP rate of all generated filters is the same as without the option. (YMMV as heavily accessed filters might be unluckily lower accuracy.) Thus, the option near-minimizes what the block cache considers as "memory used" for a given target Bloom filter false positive rate and Bloom filter implementation. There are no forward or backward compatibility issues with this change, though it only works on the format_version=5 Bloom filter. With Jemalloc, we see about 10% reduction in memory footprint (and block cache charge) for Bloom filters, but 1-2% increase in storage footprint, due to encoding efficiency losses (FP rate is non-linear with bits/key). Why not weighted random round up/down rather than state tracking? By only requiring malloc_usable_size, we don't actually know what the next larger and next smaller usable sizes for the allocator are. We pick a requested size, accept and use whatever usable size it has, and use the difference to inform our next choice. This allows us to narrow in on the right balance without tracking/predicting usable sizes. Why not weight history of generated filter false positive rates by number of keys? This could lead to excess skew in small filters after generating a large filter. Results from filter_bench with jemalloc (irrelevant details omitted): (normal keys/filter, but high variance) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.6278 Number of filters: 5516 Total size (MB): 200.046 Reported total allocated memory (MB): 220.597 Reported internal fragmentation: 10.2732% Bits/key stored: 10.0097 Average FP rate %: 0.965228 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.5104 Number of filters: 5464 Total size (MB): 200.015 Reported total allocated memory (MB): 200.322 Reported internal fragmentation: 0.153709% Bits/key stored: 10.1011 Average FP rate %: 0.966313 (very few keys / filter, optimization not as effective due to ~59 byte internal fragmentation in blocked Bloom filter representation) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.5649 Number of filters: 162950 Total size (MB): 200.001 Reported total allocated memory (MB): 224.624 Reported internal fragmentation: 12.3117% Bits/key stored: 10.2951 Average FP rate %: 0.821534 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 31.8057 Number of filters: 159849 Total size (MB): 200 Reported total allocated memory (MB): 208.846 Reported internal fragmentation: 4.42297% Bits/key stored: 10.4948 Average FP rate %: 0.811006 (high keys/filter) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.7017 Number of filters: 164 Total size (MB): 200.352 Reported total allocated memory (MB): 221.5 Reported internal fragmentation: 10.5552% Bits/key stored: 10.0003 Average FP rate %: 0.969358 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.7131 Number of filters: 160 Total size (MB): 200.928 Reported total allocated memory (MB): 200.938 Reported internal fragmentation: 0.00448054% Bits/key stored: 10.1852 Average FP rate %: 0.963387 And from db_bench (block cache) with jemalloc: $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17063835 $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17430747 $ #^ 2.1% additional filter storage $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8440400 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 21087528 rocksdb.bloom.filter.useful COUNT : 4963889 rocksdb.bloom.filter.full.positive COUNT : 1214081 rocksdb.bloom.filter.full.true.positive COUNT : 1161999 $ #^ 1.04 % observed FP rate $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8448592 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 18220328 rocksdb.bloom.filter.useful COUNT : 5360933 rocksdb.bloom.filter.full.positive COUNT : 1321315 rocksdb.bloom.filter.full.true.positive COUNT : 1262999 $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters (Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427 Test Plan: unit test added, 'make check' with gcc, clang and valgrind Reviewed By: siying Differential Revision: D22124374 Pulled By: pdillinger fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 22:30:57 +02:00
protected:
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BlockBasedTableOptions table_options_;
Minimize memory internal fragmentation for Bloom filters (#6427) Summary: New experimental option BBTO::optimize_filters_for_memory builds filters that maximize their use of "usable size" from malloc_usable_size, which is also used to compute block cache charges. Rather than always "rounding up," we track state in the BloomFilterPolicy object to mix essentially "rounding down" and "rounding up" so that the average FP rate of all generated filters is the same as without the option. (YMMV as heavily accessed filters might be unluckily lower accuracy.) Thus, the option near-minimizes what the block cache considers as "memory used" for a given target Bloom filter false positive rate and Bloom filter implementation. There are no forward or backward compatibility issues with this change, though it only works on the format_version=5 Bloom filter. With Jemalloc, we see about 10% reduction in memory footprint (and block cache charge) for Bloom filters, but 1-2% increase in storage footprint, due to encoding efficiency losses (FP rate is non-linear with bits/key). Why not weighted random round up/down rather than state tracking? By only requiring malloc_usable_size, we don't actually know what the next larger and next smaller usable sizes for the allocator are. We pick a requested size, accept and use whatever usable size it has, and use the difference to inform our next choice. This allows us to narrow in on the right balance without tracking/predicting usable sizes. Why not weight history of generated filter false positive rates by number of keys? This could lead to excess skew in small filters after generating a large filter. Results from filter_bench with jemalloc (irrelevant details omitted): (normal keys/filter, but high variance) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.6278 Number of filters: 5516 Total size (MB): 200.046 Reported total allocated memory (MB): 220.597 Reported internal fragmentation: 10.2732% Bits/key stored: 10.0097 Average FP rate %: 0.965228 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.5104 Number of filters: 5464 Total size (MB): 200.015 Reported total allocated memory (MB): 200.322 Reported internal fragmentation: 0.153709% Bits/key stored: 10.1011 Average FP rate %: 0.966313 (very few keys / filter, optimization not as effective due to ~59 byte internal fragmentation in blocked Bloom filter representation) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.5649 Number of filters: 162950 Total size (MB): 200.001 Reported total allocated memory (MB): 224.624 Reported internal fragmentation: 12.3117% Bits/key stored: 10.2951 Average FP rate %: 0.821534 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 31.8057 Number of filters: 159849 Total size (MB): 200 Reported total allocated memory (MB): 208.846 Reported internal fragmentation: 4.42297% Bits/key stored: 10.4948 Average FP rate %: 0.811006 (high keys/filter) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.7017 Number of filters: 164 Total size (MB): 200.352 Reported total allocated memory (MB): 221.5 Reported internal fragmentation: 10.5552% Bits/key stored: 10.0003 Average FP rate %: 0.969358 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.7131 Number of filters: 160 Total size (MB): 200.928 Reported total allocated memory (MB): 200.938 Reported internal fragmentation: 0.00448054% Bits/key stored: 10.1852 Average FP rate %: 0.963387 And from db_bench (block cache) with jemalloc: $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17063835 $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17430747 $ #^ 2.1% additional filter storage $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8440400 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 21087528 rocksdb.bloom.filter.useful COUNT : 4963889 rocksdb.bloom.filter.full.positive COUNT : 1214081 rocksdb.bloom.filter.full.true.positive COUNT : 1161999 $ #^ 1.04 % observed FP rate $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8448592 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 18220328 rocksdb.bloom.filter.useful COUNT : 5360933 rocksdb.bloom.filter.full.positive COUNT : 1321315 rocksdb.bloom.filter.full.true.positive COUNT : 1262999 $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters (Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427 Test Plan: unit test added, 'make check' with gcc, clang and valgrind Reviewed By: siying Differential Revision: D22124374 Pulled By: pdillinger fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 22:30:57 +02:00
private:
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
std::shared_ptr<const FilterPolicy>& policy_;
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
std::unique_ptr<FilterBitsBuilder> bits_builder_;
std::unique_ptr<FilterBitsReader> bits_reader_;
std::unique_ptr<const char[]> buf_;
size_t filter_size_;
public:
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
FullBloomTest() : policy_(table_options_.filter_policy), filter_size_(0) {
ResetPolicy();
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
}
BuiltinFilterBitsBuilder* GetBuiltinFilterBitsBuilder() {
// Throws on bad cast
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
return &dynamic_cast<BuiltinFilterBitsBuilder&>(*bits_builder_);
}
const BloomFilterPolicy* GetBloomFilterPolicy() {
// Throws on bad cast
return &dynamic_cast<const BloomFilterPolicy&>(*policy_);
}
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
void Reset() {
bits_builder_.reset(BloomFilterPolicy::GetBuilderFromContext(
FilterBuildingContext(table_options_)));
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
bits_reader_.reset(nullptr);
buf_.reset(nullptr);
filter_size_ = 0;
}
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
void ResetPolicy(double bits_per_key) {
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
policy_.reset(new BloomFilterPolicy(bits_per_key, GetParam()));
Reset();
}
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
void ResetPolicy() { ResetPolicy(FLAGS_bits_per_key); }
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
void Add(const Slice& s) {
bits_builder_->AddKey(s);
}
void OpenRaw(const Slice& s) {
bits_reader_.reset(policy_->GetFilterBitsReader(s));
}
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
void Build() {
Slice filter = bits_builder_->Finish(&buf_);
bits_reader_.reset(policy_->GetFilterBitsReader(filter));
filter_size_ = filter.size();
}
size_t FilterSize() const {
return filter_size_;
}
Slice FilterData() { return Slice(buf_.get(), filter_size_); }
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
int GetNumProbesFromFilterData() {
assert(filter_size_ >= 5);
int8_t raw_num_probes = static_cast<int8_t>(buf_.get()[filter_size_ - 5]);
if (raw_num_probes == -1) { // New bloom filter marker
return static_cast<uint8_t>(buf_.get()[filter_size_ - 3]);
} else {
return raw_num_probes;
}
}
int GetRibbonSeedFromFilterData() {
assert(filter_size_ >= 5);
// Check for ribbon marker
assert(-2 == static_cast<int8_t>(buf_.get()[filter_size_ - 5]));
return static_cast<uint8_t>(buf_.get()[filter_size_ - 4]);
}
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
bool Matches(const Slice& s) {
if (bits_reader_ == nullptr) {
Build();
}
return bits_reader_->MayMatch(s);
}
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
// Provides a kind of fingerprint on the Bloom filter's
// behavior, for reasonbly high FP rates.
uint64_t PackedMatches() {
char buffer[sizeof(int)];
uint64_t result = 0;
for (int i = 0; i < 64; i++) {
if (Matches(Key(i + 12345, buffer))) {
result |= uint64_t{1} << i;
}
}
return result;
}
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
// Provides a kind of fingerprint on the Bloom filter's
// behavior, for lower FP rates.
std::string FirstFPs(int count) {
char buffer[sizeof(int)];
std::string rv;
int fp_count = 0;
for (int i = 0; i < 1000000; i++) {
// Pack four match booleans into each hexadecimal digit
if (Matches(Key(i + 1000000, buffer))) {
++fp_count;
rv += std::to_string(i);
if (fp_count == count) {
break;
}
rv += ',';
}
}
return rv;
}
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
double FalsePositiveRate() {
char buffer[sizeof(int)];
int result = 0;
for (int i = 0; i < 10000; i++) {
if (Matches(Key(i + 1000000000, buffer))) {
result++;
}
}
return result / 10000.0;
}
};
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
TEST_P(FullBloomTest, FilterSize) {
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
// In addition to checking the consistency of space computation, we are
// checking that denoted and computed doubles are interpreted as expected
// as bits_per_key values.
bool some_computed_less_than_denoted = false;
// Note: enforced minimum is 1 bit per key (1000 millibits), and enforced
// maximum is 100 bits per key (100000 millibits).
for (auto bpk :
std::vector<std::pair<double, int> >{{-HUGE_VAL, 1000},
{-INFINITY, 1000},
{0.0, 1000},
{1.234, 1234},
{3.456, 3456},
{9.5, 9500},
{10.0, 10000},
{10.499, 10499},
{21.345, 21345},
{99.999, 99999},
{1234.0, 100000},
{HUGE_VAL, 100000},
{INFINITY, 100000},
{NAN, 100000}}) {
ResetPolicy(bpk.first);
auto bfp = GetBloomFilterPolicy();
EXPECT_EQ(bpk.second, bfp->GetMillibitsPerKey());
EXPECT_EQ((bpk.second + 500) / 1000, bfp->GetWholeBitsPerKey());
double computed = bpk.first;
// This transforms e.g. 9.5 -> 9.499999999999998, which we still
// round to 10 for whole bits per key.
computed += 0.5;
computed /= 1234567.0;
computed *= 1234567.0;
computed -= 0.5;
some_computed_less_than_denoted |= (computed < bpk.first);
ResetPolicy(computed);
bfp = GetBloomFilterPolicy();
EXPECT_EQ(bpk.second, bfp->GetMillibitsPerKey());
EXPECT_EQ((bpk.second + 500) / 1000, bfp->GetWholeBitsPerKey());
auto bits_builder = GetBuiltinFilterBitsBuilder();
Use size_t for filter APIs, protect against overflow (#7726) Summary: Deprecate CalculateNumEntry and replace with ApproximateNumEntries (better name) using size_t instead of int and uint32_t, to minimize confusing casts and bad overflow behavior (possible though probably not realistic). Bloom sizes are now explicitly capped at max size supported by implementations: just under 4GiB for fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This hardening could help to set up for fuzzing. Also, since RocksDB only uses this information as an approximation for trying to hit certain sizes for partitioned filters, it's more important that the function be reasonably fast than for it to be completely accurate. It's hard enough to be 100% accurate for Ribbon (currently reversing CalculateSpace) that adding optimize_filters_for_memory into the mix is just not worth trying to be 100% accurate for num entries for bytes. Also: - Cleaned up filter_policy.h to remove MSVC warning handling and potentially unsafe use of exception for "not implemented" - Correct the number of entries limit beyond which current Ribbon implementation falls back on Bloom instead. - Consistently use "num_entries" rather than "num_entry" - Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially obsolete from general implementation BuiltinFilterBitsBuilder::CalculateNumEntries. - Fix filter_bench to skip some tests that don't make sense when only one or a small number of filters has been generated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726 Test Plan: expanded existing unit tests for CalculateSpace / ApproximateNumEntries. Also manually used filter_bench to verify Legacy and fv=5 Bloom size caps work (much too expensive for unit test). Note that the actual bits per key is below requested due to space cap. $ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate ... Total size (MB): 511.992 Bits/key stored: 16.777 ... $ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000 ... Total size (MB): 4096 Bits/key stored: 17.1799 ... $ Reviewed By: jay-zhuang Differential Revision: D25239800 Pulled By: pdillinger fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
2020-12-12 07:17:08 +01:00
size_t n = 1;
size_t space = 0;
Support optimize_filters_for_memory for Ribbon filter (#7774) Summary: Primarily this change refactors the optimize_filters_for_memory code for Bloom filters, based on malloc_usable_size, to also work for Ribbon filters. This change also replaces the somewhat slow but general BuiltinFilterBitsBuilder::ApproximateNumEntries with implementation-specific versions for Ribbon (new) and Legacy Bloom (based on a recently deleted version). The reason is to emphasize speed in ApproximateNumEntries rather than 100% accuracy. Justification: ApproximateNumEntries (formerly CalculateNumEntry) is only used by RocksDB for range-partitioned filters, called each time we start to construct one. (In theory, it should be possible to reuse the estimate, but the abstractions provided by FilterPolicy don't really make that workable.) But this is only used as a heuristic estimate for hitting a desired partitioned filter size because of alignment to data blocks, which have various numbers of unique keys or prefixes. The two factors lead us to prioritize reasonable speed over 100% accuracy. optimize_filters_for_memory adds extra complication, because precisely calculating num_entries for some allowed number of bytes depends on state with optimize_filters_for_memory enabled. And the allocator-agnostic implementation of optimize_filters_for_memory, using malloc_usable_size, means we would have to actually allocate memory, many times, just to precisely determine how many entries (keys) could be added and stay below some size budget, for the current state. (In a draft, I got this working, and then realized the balance of speed vs. accuracy was all wrong.) So related to that, I have made CalculateSpace, an internal-only API only used for testing, non-authoritative also if optimize_filters_for_memory is enabled. This simplifies some code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7774 Test Plan: unit test updated, and for FilterSize test, range of tested values is greatly expanded (still super fast) Also tested `db_bench -benchmarks=fillrandom,stats -bloom_bits=10 -num=1000000 -partition_index_and_filters -format_version=5 [-optimize_filters_for_memory] [-use_ribbon_filter]` with temporary debug output of generated filter sizes. Bloom+optimize_filters_for_memory: 1 Filter size: 197 (224 in memory) 134 Filter size: 3525 (3584 in memory) 107 Filter size: 4037 (4096 in memory) Total on disk: 904,506 Total in memory: 918,752 Ribbon+optimize_filters_for_memory: 1 Filter size: 3061 (3072 in memory) 110 Filter size: 3573 (3584 in memory) 58 Filter size: 4085 (4096 in memory) Total on disk: 633,021 (-30.0%) Total in memory: 634,880 (-30.9%) Bloom (no offm): 1 Filter size: 261 (320 in memory) 1 Filter size: 3333 (3584 in memory) 240 Filter size: 3717 (4096 in memory) Total on disk: 895,674 (-1% on disk vs. +offm; known tolerable overhead of offm) Total in memory: 986,944 (+7.4% vs. +offm) Ribbon (no offm): 1 Filter size: 2949 (3072 in memory) 1 Filter size: 3381 (3584 in memory) 167 Filter size: 3701 (4096 in memory) Total on disk: 624,397 (-30.3% vs. Bloom) Total in memory: 690,688 (-30.0% vs. Bloom) Note that optimize_filters_for_memory is even more effective for Ribbon filter than for cache-local Bloom, because it can close the unused memory gap even tighter than Bloom filter, because of 16 byte increments for Ribbon vs. 64 byte increments for Bloom. Reviewed By: jay-zhuang Differential Revision: D25592970 Pulled By: pdillinger fbshipit-source-id: 606fdaa025bb790d7e9c21601e8ea86e10541912
2020-12-18 23:29:48 +01:00
for (; n < 1000000; n += 1 + n / 1000) {
Use size_t for filter APIs, protect against overflow (#7726) Summary: Deprecate CalculateNumEntry and replace with ApproximateNumEntries (better name) using size_t instead of int and uint32_t, to minimize confusing casts and bad overflow behavior (possible though probably not realistic). Bloom sizes are now explicitly capped at max size supported by implementations: just under 4GiB for fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This hardening could help to set up for fuzzing. Also, since RocksDB only uses this information as an approximation for trying to hit certain sizes for partitioned filters, it's more important that the function be reasonably fast than for it to be completely accurate. It's hard enough to be 100% accurate for Ribbon (currently reversing CalculateSpace) that adding optimize_filters_for_memory into the mix is just not worth trying to be 100% accurate for num entries for bytes. Also: - Cleaned up filter_policy.h to remove MSVC warning handling and potentially unsafe use of exception for "not implemented" - Correct the number of entries limit beyond which current Ribbon implementation falls back on Bloom instead. - Consistently use "num_entries" rather than "num_entry" - Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially obsolete from general implementation BuiltinFilterBitsBuilder::CalculateNumEntries. - Fix filter_bench to skip some tests that don't make sense when only one or a small number of filters has been generated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726 Test Plan: expanded existing unit tests for CalculateSpace / ApproximateNumEntries. Also manually used filter_bench to verify Legacy and fv=5 Bloom size caps work (much too expensive for unit test). Note that the actual bits per key is below requested due to space cap. $ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate ... Total size (MB): 511.992 Bits/key stored: 16.777 ... $ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000 ... Total size (MB): 4096 Bits/key stored: 17.1799 ... $ Reviewed By: jay-zhuang Differential Revision: D25239800 Pulled By: pdillinger fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
2020-12-12 07:17:08 +01:00
// Ensure consistency between CalculateSpace and ApproximateNumEntries
space = bits_builder->CalculateSpace(n);
size_t n2 = bits_builder->ApproximateNumEntries(space);
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
EXPECT_GE(n2, n);
Use size_t for filter APIs, protect against overflow (#7726) Summary: Deprecate CalculateNumEntry and replace with ApproximateNumEntries (better name) using size_t instead of int and uint32_t, to minimize confusing casts and bad overflow behavior (possible though probably not realistic). Bloom sizes are now explicitly capped at max size supported by implementations: just under 4GiB for fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This hardening could help to set up for fuzzing. Also, since RocksDB only uses this information as an approximation for trying to hit certain sizes for partitioned filters, it's more important that the function be reasonably fast than for it to be completely accurate. It's hard enough to be 100% accurate for Ribbon (currently reversing CalculateSpace) that adding optimize_filters_for_memory into the mix is just not worth trying to be 100% accurate for num entries for bytes. Also: - Cleaned up filter_policy.h to remove MSVC warning handling and potentially unsafe use of exception for "not implemented" - Correct the number of entries limit beyond which current Ribbon implementation falls back on Bloom instead. - Consistently use "num_entries" rather than "num_entry" - Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially obsolete from general implementation BuiltinFilterBitsBuilder::CalculateNumEntries. - Fix filter_bench to skip some tests that don't make sense when only one or a small number of filters has been generated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726 Test Plan: expanded existing unit tests for CalculateSpace / ApproximateNumEntries. Also manually used filter_bench to verify Legacy and fv=5 Bloom size caps work (much too expensive for unit test). Note that the actual bits per key is below requested due to space cap. $ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate ... Total size (MB): 511.992 Bits/key stored: 16.777 ... $ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000 ... Total size (MB): 4096 Bits/key stored: 17.1799 ... $ Reviewed By: jay-zhuang Differential Revision: D25239800 Pulled By: pdillinger fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
2020-12-12 07:17:08 +01:00
size_t space2 = bits_builder->CalculateSpace(n2);
Refine Ribbon configuration, improve testing, add Homogeneous (#7879) Summary: This change only affects non-schema-critical aspects of the production candidate Ribbon filter. Specifically, it refines choice of internal configuration parameters based on inputs. The changes are minor enough that the schema tests in bloom_test, some of which depend on this, are unaffected. There are also some minor optimizations and refactorings. This would be a schema change for "smash" Ribbon, to fix some known issues with small filters, but "smash" Ribbon is not accessible in public APIs. Unit test CompactnessAndBacktrackAndFpRate updated to test small and medium-large filters. Run with --thoroughness=100 or so for much better detection power (not appropriate for continuous regression testing). Homogenous Ribbon: This change adds internally a Ribbon filter variant we call Homogeneous Ribbon, in collaboration with Stefan Walzer. The expected "result" value for every key is zero, instead of computed from a hash. Entropy for queries not to be false positives comes from free variables ("overhead") in the solution structure, which are populated pseudorandomly. Construction is slightly faster for not tracking result values, and never fails. Instead, FP rate can jump up whenever and whereever entries are packed too tightly. For small structures, we can choose overhead to make this FP rate jump unlikely, as seen in updated unit test CompactnessAndBacktrackAndFpRate. Unlike standard Ribbon, Homogeneous Ribbon seems to scale to arbitrary number of keys when accepting an FP rate penalty for small pockets of high FP rate in the structure. For example, 64-bit ribbon with 8 solution columns and 10% allocated space overhead for slots seems to achieve about 10.5% space overhead vs. information-theoretic minimum based on its observed FP rate with expected pockets of degradation. (FP rate is close to 1/256.) If targeting a higher FP rate with fewer solution columns, Homogeneous Ribbon can be even more space efficient, because the penalty from degradation is relatively smaller. If targeting a lower FP rate, Homogeneous Ribbon is less space efficient, as more allocated overhead is needed to keep the FP rate impact of degradation relatively under control. The new OptimizeHomogAtScale tool in ribbon_test helps to find these optimal allocation overheads for different numbers of solution columns. And Ribbon widths, with 128-bit Ribbon apparently cutting space overheads in half vs. 64-bit. Other misc item specifics: * Ribbon APIs in util/ribbon_config.h now provide configuration data for not just 5% construction failure rate (95% success), but also 50% and 0.1%. * Note that the Ribbon structure does not exhibit "threshold" behavior as standard Xor filter does, so there is a roughly fixed space penalty to cut construction failure rate in half. Thus, there isn't really an "almost sure" setting. * Although we can extrapolate settings for large filters, we don't have a good formula for configuring smaller filters (< 2^17 slots or so), and efforts to summarize with a formula have failed. Thus, small data is hard-coded from updated FindOccupancy tool. * Enhances ApproximateNumEntries for public API Ribbon using more precise data (new API GetNumToAdd), thus a more accurate but not perfect reversal of CalculateSpace. (bloom_test updated to expect the greater precision) * Move EndianSwapValue from coding.h to coding_lean.h to keep Ribbon code easily transferable from RocksDB * Add some missing 'const' to member functions * Small optimization to 128-bit BitParity * Small refactoring of BandingStorage in ribbon_alg.h to support Homogeneous Ribbon * CompactnessAndBacktrackAndFpRate now has an "expand" test: on construction failure, a possible alternative to re-seeding hash functions is simply to increase the number of slots (allocated space overhead) and try again with essentially the same hash values. (Start locations will be different roundings of the same scaled hash values--because fastrange not mod.) This seems to be as effective or more effective than re-seeding, as long as we increase the number of slots (m) by roughly m += m/w where w is the Ribbon width. This way, there is effectively an expansion by one slot for each ribbon-width window in the banding. (This approach assumes that getting "bad data" from your hash function is as unlikely as it naturally should be, e.g. no adversary.) * 32-bit and 16-bit Ribbon configurations are added to ribbon_test for understanding their behavior, e.g. with FindOccupancy. They are not considered useful at this time and not tested with CompactnessAndBacktrackAndFpRate. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7879 Test Plan: unit test updates included Reviewed By: jay-zhuang Differential Revision: D26371245 Pulled By: pdillinger fbshipit-source-id: da6600d90a3785b99ad17a88b2a3027710b4ea3a
2021-02-26 17:48:55 +01:00
if (n > 12000 && GetParam() == BloomFilterPolicy::kStandard128Ribbon) {
Support optimize_filters_for_memory for Ribbon filter (#7774) Summary: Primarily this change refactors the optimize_filters_for_memory code for Bloom filters, based on malloc_usable_size, to also work for Ribbon filters. This change also replaces the somewhat slow but general BuiltinFilterBitsBuilder::ApproximateNumEntries with implementation-specific versions for Ribbon (new) and Legacy Bloom (based on a recently deleted version). The reason is to emphasize speed in ApproximateNumEntries rather than 100% accuracy. Justification: ApproximateNumEntries (formerly CalculateNumEntry) is only used by RocksDB for range-partitioned filters, called each time we start to construct one. (In theory, it should be possible to reuse the estimate, but the abstractions provided by FilterPolicy don't really make that workable.) But this is only used as a heuristic estimate for hitting a desired partitioned filter size because of alignment to data blocks, which have various numbers of unique keys or prefixes. The two factors lead us to prioritize reasonable speed over 100% accuracy. optimize_filters_for_memory adds extra complication, because precisely calculating num_entries for some allowed number of bytes depends on state with optimize_filters_for_memory enabled. And the allocator-agnostic implementation of optimize_filters_for_memory, using malloc_usable_size, means we would have to actually allocate memory, many times, just to precisely determine how many entries (keys) could be added and stay below some size budget, for the current state. (In a draft, I got this working, and then realized the balance of speed vs. accuracy was all wrong.) So related to that, I have made CalculateSpace, an internal-only API only used for testing, non-authoritative also if optimize_filters_for_memory is enabled. This simplifies some code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7774 Test Plan: unit test updated, and for FilterSize test, range of tested values is greatly expanded (still super fast) Also tested `db_bench -benchmarks=fillrandom,stats -bloom_bits=10 -num=1000000 -partition_index_and_filters -format_version=5 [-optimize_filters_for_memory] [-use_ribbon_filter]` with temporary debug output of generated filter sizes. Bloom+optimize_filters_for_memory: 1 Filter size: 197 (224 in memory) 134 Filter size: 3525 (3584 in memory) 107 Filter size: 4037 (4096 in memory) Total on disk: 904,506 Total in memory: 918,752 Ribbon+optimize_filters_for_memory: 1 Filter size: 3061 (3072 in memory) 110 Filter size: 3573 (3584 in memory) 58 Filter size: 4085 (4096 in memory) Total on disk: 633,021 (-30.0%) Total in memory: 634,880 (-30.9%) Bloom (no offm): 1 Filter size: 261 (320 in memory) 1 Filter size: 3333 (3584 in memory) 240 Filter size: 3717 (4096 in memory) Total on disk: 895,674 (-1% on disk vs. +offm; known tolerable overhead of offm) Total in memory: 986,944 (+7.4% vs. +offm) Ribbon (no offm): 1 Filter size: 2949 (3072 in memory) 1 Filter size: 3381 (3584 in memory) 167 Filter size: 3701 (4096 in memory) Total on disk: 624,397 (-30.3% vs. Bloom) Total in memory: 690,688 (-30.0% vs. Bloom) Note that optimize_filters_for_memory is even more effective for Ribbon filter than for cache-local Bloom, because it can close the unused memory gap even tighter than Bloom filter, because of 16 byte increments for Ribbon vs. 64 byte increments for Bloom. Reviewed By: jay-zhuang Differential Revision: D25592970 Pulled By: pdillinger fbshipit-source-id: 606fdaa025bb790d7e9c21601e8ea86e10541912
2020-12-18 23:29:48 +01:00
// TODO(peterd): better approximation?
EXPECT_GE(space2, space);
Refine Ribbon configuration, improve testing, add Homogeneous (#7879) Summary: This change only affects non-schema-critical aspects of the production candidate Ribbon filter. Specifically, it refines choice of internal configuration parameters based on inputs. The changes are minor enough that the schema tests in bloom_test, some of which depend on this, are unaffected. There are also some minor optimizations and refactorings. This would be a schema change for "smash" Ribbon, to fix some known issues with small filters, but "smash" Ribbon is not accessible in public APIs. Unit test CompactnessAndBacktrackAndFpRate updated to test small and medium-large filters. Run with --thoroughness=100 or so for much better detection power (not appropriate for continuous regression testing). Homogenous Ribbon: This change adds internally a Ribbon filter variant we call Homogeneous Ribbon, in collaboration with Stefan Walzer. The expected "result" value for every key is zero, instead of computed from a hash. Entropy for queries not to be false positives comes from free variables ("overhead") in the solution structure, which are populated pseudorandomly. Construction is slightly faster for not tracking result values, and never fails. Instead, FP rate can jump up whenever and whereever entries are packed too tightly. For small structures, we can choose overhead to make this FP rate jump unlikely, as seen in updated unit test CompactnessAndBacktrackAndFpRate. Unlike standard Ribbon, Homogeneous Ribbon seems to scale to arbitrary number of keys when accepting an FP rate penalty for small pockets of high FP rate in the structure. For example, 64-bit ribbon with 8 solution columns and 10% allocated space overhead for slots seems to achieve about 10.5% space overhead vs. information-theoretic minimum based on its observed FP rate with expected pockets of degradation. (FP rate is close to 1/256.) If targeting a higher FP rate with fewer solution columns, Homogeneous Ribbon can be even more space efficient, because the penalty from degradation is relatively smaller. If targeting a lower FP rate, Homogeneous Ribbon is less space efficient, as more allocated overhead is needed to keep the FP rate impact of degradation relatively under control. The new OptimizeHomogAtScale tool in ribbon_test helps to find these optimal allocation overheads for different numbers of solution columns. And Ribbon widths, with 128-bit Ribbon apparently cutting space overheads in half vs. 64-bit. Other misc item specifics: * Ribbon APIs in util/ribbon_config.h now provide configuration data for not just 5% construction failure rate (95% success), but also 50% and 0.1%. * Note that the Ribbon structure does not exhibit "threshold" behavior as standard Xor filter does, so there is a roughly fixed space penalty to cut construction failure rate in half. Thus, there isn't really an "almost sure" setting. * Although we can extrapolate settings for large filters, we don't have a good formula for configuring smaller filters (< 2^17 slots or so), and efforts to summarize with a formula have failed. Thus, small data is hard-coded from updated FindOccupancy tool. * Enhances ApproximateNumEntries for public API Ribbon using more precise data (new API GetNumToAdd), thus a more accurate but not perfect reversal of CalculateSpace. (bloom_test updated to expect the greater precision) * Move EndianSwapValue from coding.h to coding_lean.h to keep Ribbon code easily transferable from RocksDB * Add some missing 'const' to member functions * Small optimization to 128-bit BitParity * Small refactoring of BandingStorage in ribbon_alg.h to support Homogeneous Ribbon * CompactnessAndBacktrackAndFpRate now has an "expand" test: on construction failure, a possible alternative to re-seeding hash functions is simply to increase the number of slots (allocated space overhead) and try again with essentially the same hash values. (Start locations will be different roundings of the same scaled hash values--because fastrange not mod.) This seems to be as effective or more effective than re-seeding, as long as we increase the number of slots (m) by roughly m += m/w where w is the Ribbon width. This way, there is effectively an expansion by one slot for each ribbon-width window in the banding. (This approach assumes that getting "bad data" from your hash function is as unlikely as it naturally should be, e.g. no adversary.) * 32-bit and 16-bit Ribbon configurations are added to ribbon_test for understanding their behavior, e.g. with FindOccupancy. They are not considered useful at this time and not tested with CompactnessAndBacktrackAndFpRate. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7879 Test Plan: unit test updates included Reviewed By: jay-zhuang Differential Revision: D26371245 Pulled By: pdillinger fbshipit-source-id: da6600d90a3785b99ad17a88b2a3027710b4ea3a
2021-02-26 17:48:55 +01:00
EXPECT_LE(space2 * 0.998, space * 1.0);
Support optimize_filters_for_memory for Ribbon filter (#7774) Summary: Primarily this change refactors the optimize_filters_for_memory code for Bloom filters, based on malloc_usable_size, to also work for Ribbon filters. This change also replaces the somewhat slow but general BuiltinFilterBitsBuilder::ApproximateNumEntries with implementation-specific versions for Ribbon (new) and Legacy Bloom (based on a recently deleted version). The reason is to emphasize speed in ApproximateNumEntries rather than 100% accuracy. Justification: ApproximateNumEntries (formerly CalculateNumEntry) is only used by RocksDB for range-partitioned filters, called each time we start to construct one. (In theory, it should be possible to reuse the estimate, but the abstractions provided by FilterPolicy don't really make that workable.) But this is only used as a heuristic estimate for hitting a desired partitioned filter size because of alignment to data blocks, which have various numbers of unique keys or prefixes. The two factors lead us to prioritize reasonable speed over 100% accuracy. optimize_filters_for_memory adds extra complication, because precisely calculating num_entries for some allowed number of bytes depends on state with optimize_filters_for_memory enabled. And the allocator-agnostic implementation of optimize_filters_for_memory, using malloc_usable_size, means we would have to actually allocate memory, many times, just to precisely determine how many entries (keys) could be added and stay below some size budget, for the current state. (In a draft, I got this working, and then realized the balance of speed vs. accuracy was all wrong.) So related to that, I have made CalculateSpace, an internal-only API only used for testing, non-authoritative also if optimize_filters_for_memory is enabled. This simplifies some code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7774 Test Plan: unit test updated, and for FilterSize test, range of tested values is greatly expanded (still super fast) Also tested `db_bench -benchmarks=fillrandom,stats -bloom_bits=10 -num=1000000 -partition_index_and_filters -format_version=5 [-optimize_filters_for_memory] [-use_ribbon_filter]` with temporary debug output of generated filter sizes. Bloom+optimize_filters_for_memory: 1 Filter size: 197 (224 in memory) 134 Filter size: 3525 (3584 in memory) 107 Filter size: 4037 (4096 in memory) Total on disk: 904,506 Total in memory: 918,752 Ribbon+optimize_filters_for_memory: 1 Filter size: 3061 (3072 in memory) 110 Filter size: 3573 (3584 in memory) 58 Filter size: 4085 (4096 in memory) Total on disk: 633,021 (-30.0%) Total in memory: 634,880 (-30.9%) Bloom (no offm): 1 Filter size: 261 (320 in memory) 1 Filter size: 3333 (3584 in memory) 240 Filter size: 3717 (4096 in memory) Total on disk: 895,674 (-1% on disk vs. +offm; known tolerable overhead of offm) Total in memory: 986,944 (+7.4% vs. +offm) Ribbon (no offm): 1 Filter size: 2949 (3072 in memory) 1 Filter size: 3381 (3584 in memory) 167 Filter size: 3701 (4096 in memory) Total on disk: 624,397 (-30.3% vs. Bloom) Total in memory: 690,688 (-30.0% vs. Bloom) Note that optimize_filters_for_memory is even more effective for Ribbon filter than for cache-local Bloom, because it can close the unused memory gap even tighter than Bloom filter, because of 16 byte increments for Ribbon vs. 64 byte increments for Bloom. Reviewed By: jay-zhuang Differential Revision: D25592970 Pulled By: pdillinger fbshipit-source-id: 606fdaa025bb790d7e9c21601e8ea86e10541912
2020-12-18 23:29:48 +01:00
} else {
EXPECT_EQ(space2, space);
}
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
}
Use size_t for filter APIs, protect against overflow (#7726) Summary: Deprecate CalculateNumEntry and replace with ApproximateNumEntries (better name) using size_t instead of int and uint32_t, to minimize confusing casts and bad overflow behavior (possible though probably not realistic). Bloom sizes are now explicitly capped at max size supported by implementations: just under 4GiB for fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This hardening could help to set up for fuzzing. Also, since RocksDB only uses this information as an approximation for trying to hit certain sizes for partitioned filters, it's more important that the function be reasonably fast than for it to be completely accurate. It's hard enough to be 100% accurate for Ribbon (currently reversing CalculateSpace) that adding optimize_filters_for_memory into the mix is just not worth trying to be 100% accurate for num entries for bytes. Also: - Cleaned up filter_policy.h to remove MSVC warning handling and potentially unsafe use of exception for "not implemented" - Correct the number of entries limit beyond which current Ribbon implementation falls back on Bloom instead. - Consistently use "num_entries" rather than "num_entry" - Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially obsolete from general implementation BuiltinFilterBitsBuilder::CalculateNumEntries. - Fix filter_bench to skip some tests that don't make sense when only one or a small number of filters has been generated. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726 Test Plan: expanded existing unit tests for CalculateSpace / ApproximateNumEntries. Also manually used filter_bench to verify Legacy and fv=5 Bloom size caps work (much too expensive for unit test). Note that the actual bits per key is below requested due to space cap. $ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate ... Total size (MB): 511.992 Bits/key stored: 16.777 ... $ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000 ... Total size (MB): 4096 Bits/key stored: 17.1799 ... $ Reviewed By: jay-zhuang Differential Revision: D25239800 Pulled By: pdillinger fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
2020-12-12 07:17:08 +01:00
// Until size_t overflow
for (; n < (n + n / 3); n += n / 3) {
// Ensure space computation is not overflowing; capped is OK
size_t space2 = bits_builder->CalculateSpace(n);
EXPECT_GE(space2, space);
space = space2;
}
}
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
// Check that the compiler hasn't optimized our computation into nothing
EXPECT_TRUE(some_computed_less_than_denoted);
ResetPolicy();
}
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
TEST_P(FullBloomTest, FullEmptyFilter) {
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
// Empty filter is not match, at this level
ASSERT_TRUE(!Matches("hello"));
ASSERT_TRUE(!Matches("world"));
}
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
TEST_P(FullBloomTest, FullSmall) {
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
Add("hello");
Add("world");
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
ASSERT_TRUE(!Matches("x"));
ASSERT_TRUE(!Matches("foo"));
}
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
TEST_P(FullBloomTest, FullVaryingLengths) {
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
char buffer[sizeof(int)];
// Count number of filters that significantly exceed the false positive rate
int mediocre_filters = 0;
int good_filters = 0;
for (int length = 1; length <= 10000; length = NextLength(length)) {
Reset();
for (int i = 0; i < length; i++) {
Add(Key(i, buffer));
}
Build();
EXPECT_LE(FilterSize(), (size_t)((length * FLAGS_bits_per_key / 8) +
CACHE_LINE_SIZE * 2 + 5));
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
// All added keys must match
for (int i = 0; i < length; i++) {
ASSERT_TRUE(Matches(Key(i, buffer)))
<< "Length " << length << "; key " << i;
}
// Check false positive rate
double rate = FalsePositiveRate();
if (kVerbose >= 1) {
fprintf(stderr, "False positives: %5.2f%% @ length = %6d ; bytes = %6d\n",
rate*100.0, length, static_cast<int>(FilterSize()));
}
if (FLAGS_bits_per_key == 10) {
EXPECT_LE(rate, 0.02); // Must not be over 2%
if (rate > 0.0125) {
mediocre_filters++; // Allowed, but not too often
} else {
good_filters++;
}
}
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
}
if (kVerbose >= 1) {
fprintf(stderr, "Filters: %d good, %d mediocre\n",
good_filters, mediocre_filters);
}
Experimental (production candidate) SST schema for Ribbon filter (#7658) Summary: Added experimental public API for Ribbon filter: NewExperimentalRibbonFilterPolicy(). This experimental API will take a "Bloom equivalent" bits per key, and configure the Ribbon filter for the same FP rate as Bloom would have but ~30% space savings. (Note: optimize_filters_for_memory is not yet implemented for Ribbon filter. That can be added with no effect on schema.) Internally, the Ribbon filter is configured using a "one_in_fp_rate" value, which is 1 over desired FP rate. For example, use 100 for 1% FP rate. I'm expecting this will be used in the future for configuring Bloom-like filters, as I expect people to more commonly hold constant the filter accuracy and change the space vs. time trade-off, rather than hold constant the space (per key) and change the accuracy vs. time trade-off, though we might make that available. ### Benchmarking ``` $ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing Building... Build avg ns/key: 34.1341 Number of filters: 1993 Total size (MB): 238.488 Reported total allocated memory (MB): 262.875 Reported internal fragmentation: 10.2255% Bits/key stored: 10.0029 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 18.7508 Random filter net ns/op: 258.246 Average FP rate %: 0.968672 ---------------------------- Done. (For more info, run with -legend or -help.) $ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing Building... Build avg ns/key: 130.851 Number of filters: 1993 Total size (MB): 168.166 Reported total allocated memory (MB): 183.211 Reported internal fragmentation: 8.94626% Bits/key stored: 7.05341 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 58.4523 Random filter net ns/op: 363.717 Average FP rate %: 0.952978 ---------------------------- Done. (For more info, run with -legend or -help.) ``` 168.166 / 238.488 = 0.705 -> 29.5% space reduction 130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction) ### Working around a hashing "flaw" bloom_test discovered a flaw in the simple hashing applied in StandardHasher when num_starts == 1 (num_slots == 128), showing an excessively high FP rate. The problem is that when many entries, on the order of number of hash bits or kCoeffBits, are associated with the same start location, the correlation between the CoeffRow and ResultRow (for efficiency) can lead to a solution that is "universal," or nearly so, for entries mapping to that start location. (Normally, variance in start location breaks the effective association between CoeffRow and ResultRow; the same value for CoeffRow is effectively different if start locations are different.) Without kUseSmash and with num_starts > 1 (thus num_starts ~= num_slots), this flaw should be completely irrelevant. Even with 10M slots, the chances of a single slot having just 16 (or more) entries map to it--not enough to cause an FP problem, which would be local to that slot if it happened--is 1 in millions. This spreadsheet formula shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE))) As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is intended for CPU efficiency of filters with many more entries/slots than kCoeffBits, a very reasonable work-around is to disallow num_starts==1 when !kUseSmash, by making the minimum non-zero number of slots 2*kCoeffBits. This is the work-around I've applied. This also means that the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not space-efficient for less than a few hundred entries. Because of this, I have made it fall back on constructing a Bloom filter, under existing schema, when that is more space efficient for small filters. (We can change this in the future if we want.) TODO: better unit tests for this case in ribbon_test, and probably update StandardHasher for kUseSmash case so that it can scale nicely to small filters. ### Other related changes * Add Ribbon filter to stress/crash test * Add Ribbon filter to filter_bench as -impl=3 * Add option string support, as in "filter_policy=experimental_ribbon:5.678;" where 5.678 is the Bloom equivalent bits per key. * Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom * Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on binary searching CalculateSpace (inefficient), so that subclasses (especially experimental ones) don't have to provide an efficient implementation inverting CalculateSpace. * Minor refactor FastLocalBloomBitsBuilder for new base class XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder, which allows the latter to fall back on Bloom construction in some extreme cases. * Mostly updated bloom_test for Ribbon filter, though a test like FullBloomTest::Schema is a next TODO to ensure schema stability (in case this becomes production-ready schema as it is). * Add some APIs to ribbon_impl.h for configuring Ribbon filters. Although these are reasonably covered by bloom_test, TODO more unit tests in ribbon_test * Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data for constructing the linear approximations in GetNumSlotsFor95PctSuccess. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658 Test Plan: Some unit tests updated but other testing is left TODO. This is considered experimental but laying down schema compatibility as early as possible in case it proves production-quality. Also tested in stress/crash test. Reviewed By: jay-zhuang Differential Revision: D24899349 Pulled By: pdillinger fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
2020-11-13 05:45:02 +01:00
EXPECT_LE(mediocre_filters, good_filters / 5);
Implement full filter for block based table. Summary: 1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file. 2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter. 3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type. 4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h. 5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc Benchmark: base commit 1d23b5c470844c1208301311f0889eca750431c0 Command: db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1 Read QPS increase for about 30% from 2230002 to 2991411. Test Plan: make all check valgrind db_test db_stress --use_block_based_filter = 0 ./auto_sanity_test.sh Reviewers: igor, yhchiang, ljin, sdong Reviewed By: sdong Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D20979
2014-09-08 19:37:05 +02:00
}
Minimize memory internal fragmentation for Bloom filters (#6427) Summary: New experimental option BBTO::optimize_filters_for_memory builds filters that maximize their use of "usable size" from malloc_usable_size, which is also used to compute block cache charges. Rather than always "rounding up," we track state in the BloomFilterPolicy object to mix essentially "rounding down" and "rounding up" so that the average FP rate of all generated filters is the same as without the option. (YMMV as heavily accessed filters might be unluckily lower accuracy.) Thus, the option near-minimizes what the block cache considers as "memory used" for a given target Bloom filter false positive rate and Bloom filter implementation. There are no forward or backward compatibility issues with this change, though it only works on the format_version=5 Bloom filter. With Jemalloc, we see about 10% reduction in memory footprint (and block cache charge) for Bloom filters, but 1-2% increase in storage footprint, due to encoding efficiency losses (FP rate is non-linear with bits/key). Why not weighted random round up/down rather than state tracking? By only requiring malloc_usable_size, we don't actually know what the next larger and next smaller usable sizes for the allocator are. We pick a requested size, accept and use whatever usable size it has, and use the difference to inform our next choice. This allows us to narrow in on the right balance without tracking/predicting usable sizes. Why not weight history of generated filter false positive rates by number of keys? This could lead to excess skew in small filters after generating a large filter. Results from filter_bench with jemalloc (irrelevant details omitted): (normal keys/filter, but high variance) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.6278 Number of filters: 5516 Total size (MB): 200.046 Reported total allocated memory (MB): 220.597 Reported internal fragmentation: 10.2732% Bits/key stored: 10.0097 Average FP rate %: 0.965228 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.5104 Number of filters: 5464 Total size (MB): 200.015 Reported total allocated memory (MB): 200.322 Reported internal fragmentation: 0.153709% Bits/key stored: 10.1011 Average FP rate %: 0.966313 (very few keys / filter, optimization not as effective due to ~59 byte internal fragmentation in blocked Bloom filter representation) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.5649 Number of filters: 162950 Total size (MB): 200.001 Reported total allocated memory (MB): 224.624 Reported internal fragmentation: 12.3117% Bits/key stored: 10.2951 Average FP rate %: 0.821534 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 31.8057 Number of filters: 159849 Total size (MB): 200 Reported total allocated memory (MB): 208.846 Reported internal fragmentation: 4.42297% Bits/key stored: 10.4948 Average FP rate %: 0.811006 (high keys/filter) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.7017 Number of filters: 164 Total size (MB): 200.352 Reported total allocated memory (MB): 221.5 Reported internal fragmentation: 10.5552% Bits/key stored: 10.0003 Average FP rate %: 0.969358 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.7131 Number of filters: 160 Total size (MB): 200.928 Reported total allocated memory (MB): 200.938 Reported internal fragmentation: 0.00448054% Bits/key stored: 10.1852 Average FP rate %: 0.963387 And from db_bench (block cache) with jemalloc: $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17063835 $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17430747 $ #^ 2.1% additional filter storage $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8440400 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 21087528 rocksdb.bloom.filter.useful COUNT : 4963889 rocksdb.bloom.filter.full.positive COUNT : 1214081 rocksdb.bloom.filter.full.true.positive COUNT : 1161999 $ #^ 1.04 % observed FP rate $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8448592 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 18220328 rocksdb.bloom.filter.useful COUNT : 5360933 rocksdb.bloom.filter.full.positive COUNT : 1321315 rocksdb.bloom.filter.full.true.positive COUNT : 1262999 $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters (Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427 Test Plan: unit test added, 'make check' with gcc, clang and valgrind Reviewed By: siying Differential Revision: D22124374 Pulled By: pdillinger fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 22:30:57 +02:00
TEST_P(FullBloomTest, OptimizeForMemory) {
char buffer[sizeof(int)];
for (bool offm : {true, false}) {
table_options_.optimize_filters_for_memory = offm;
ResetPolicy();
Random32 rnd(12345);
uint64_t total_size = 0;
uint64_t total_mem = 0;
int64_t total_keys = 0;
double total_fp_rate = 0;
constexpr int nfilters = 100;
for (int i = 0; i < nfilters; ++i) {
int nkeys = static_cast<int>(rnd.Uniformish(10000)) + 100;
Reset();
for (int j = 0; j < nkeys; ++j) {
Add(Key(j, buffer));
}
Build();
size_t size = FilterData().size();
total_size += size;
// optimize_filters_for_memory currently depends on malloc_usable_size
// but we run the rest of the test to ensure no bad behavior without it.
#ifdef ROCKSDB_MALLOC_USABLE_SIZE
size = malloc_usable_size(const_cast<char*>(FilterData().data()));
#endif // ROCKSDB_MALLOC_USABLE_SIZE
total_mem += size;
total_keys += nkeys;
total_fp_rate += FalsePositiveRate();
}
if (FLAGS_bits_per_key == 10) {
EXPECT_LE(total_fp_rate / double{nfilters}, 0.011);
EXPECT_GE(total_fp_rate / double{nfilters},
CACHE_LINE_SIZE >= 256 ? 0.007 : 0.008);
}
Minimize memory internal fragmentation for Bloom filters (#6427) Summary: New experimental option BBTO::optimize_filters_for_memory builds filters that maximize their use of "usable size" from malloc_usable_size, which is also used to compute block cache charges. Rather than always "rounding up," we track state in the BloomFilterPolicy object to mix essentially "rounding down" and "rounding up" so that the average FP rate of all generated filters is the same as without the option. (YMMV as heavily accessed filters might be unluckily lower accuracy.) Thus, the option near-minimizes what the block cache considers as "memory used" for a given target Bloom filter false positive rate and Bloom filter implementation. There are no forward or backward compatibility issues with this change, though it only works on the format_version=5 Bloom filter. With Jemalloc, we see about 10% reduction in memory footprint (and block cache charge) for Bloom filters, but 1-2% increase in storage footprint, due to encoding efficiency losses (FP rate is non-linear with bits/key). Why not weighted random round up/down rather than state tracking? By only requiring malloc_usable_size, we don't actually know what the next larger and next smaller usable sizes for the allocator are. We pick a requested size, accept and use whatever usable size it has, and use the difference to inform our next choice. This allows us to narrow in on the right balance without tracking/predicting usable sizes. Why not weight history of generated filter false positive rates by number of keys? This could lead to excess skew in small filters after generating a large filter. Results from filter_bench with jemalloc (irrelevant details omitted): (normal keys/filter, but high variance) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.6278 Number of filters: 5516 Total size (MB): 200.046 Reported total allocated memory (MB): 220.597 Reported internal fragmentation: 10.2732% Bits/key stored: 10.0097 Average FP rate %: 0.965228 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.5104 Number of filters: 5464 Total size (MB): 200.015 Reported total allocated memory (MB): 200.322 Reported internal fragmentation: 0.153709% Bits/key stored: 10.1011 Average FP rate %: 0.966313 (very few keys / filter, optimization not as effective due to ~59 byte internal fragmentation in blocked Bloom filter representation) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.5649 Number of filters: 162950 Total size (MB): 200.001 Reported total allocated memory (MB): 224.624 Reported internal fragmentation: 12.3117% Bits/key stored: 10.2951 Average FP rate %: 0.821534 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 31.8057 Number of filters: 159849 Total size (MB): 200 Reported total allocated memory (MB): 208.846 Reported internal fragmentation: 4.42297% Bits/key stored: 10.4948 Average FP rate %: 0.811006 (high keys/filter) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.7017 Number of filters: 164 Total size (MB): 200.352 Reported total allocated memory (MB): 221.5 Reported internal fragmentation: 10.5552% Bits/key stored: 10.0003 Average FP rate %: 0.969358 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.7131 Number of filters: 160 Total size (MB): 200.928 Reported total allocated memory (MB): 200.938 Reported internal fragmentation: 0.00448054% Bits/key stored: 10.1852 Average FP rate %: 0.963387 And from db_bench (block cache) with jemalloc: $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17063835 $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17430747 $ #^ 2.1% additional filter storage $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8440400 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 21087528 rocksdb.bloom.filter.useful COUNT : 4963889 rocksdb.bloom.filter.full.positive COUNT : 1214081 rocksdb.bloom.filter.full.true.positive COUNT : 1161999 $ #^ 1.04 % observed FP rate $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8448592 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 18220328 rocksdb.bloom.filter.useful COUNT : 5360933 rocksdb.bloom.filter.full.positive COUNT : 1321315 rocksdb.bloom.filter.full.true.positive COUNT : 1262999 $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters (Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427 Test Plan: unit test added, 'make check' with gcc, clang and valgrind Reviewed By: siying Differential Revision: D22124374 Pulled By: pdillinger fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 22:30:57 +02:00
int64_t ex_min_total_size = int64_t{FLAGS_bits_per_key} * total_keys / 8;
Support optimize_filters_for_memory for Ribbon filter (#7774) Summary: Primarily this change refactors the optimize_filters_for_memory code for Bloom filters, based on malloc_usable_size, to also work for Ribbon filters. This change also replaces the somewhat slow but general BuiltinFilterBitsBuilder::ApproximateNumEntries with implementation-specific versions for Ribbon (new) and Legacy Bloom (based on a recently deleted version). The reason is to emphasize speed in ApproximateNumEntries rather than 100% accuracy. Justification: ApproximateNumEntries (formerly CalculateNumEntry) is only used by RocksDB for range-partitioned filters, called each time we start to construct one. (In theory, it should be possible to reuse the estimate, but the abstractions provided by FilterPolicy don't really make that workable.) But this is only used as a heuristic estimate for hitting a desired partitioned filter size because of alignment to data blocks, which have various numbers of unique keys or prefixes. The two factors lead us to prioritize reasonable speed over 100% accuracy. optimize_filters_for_memory adds extra complication, because precisely calculating num_entries for some allowed number of bytes depends on state with optimize_filters_for_memory enabled. And the allocator-agnostic implementation of optimize_filters_for_memory, using malloc_usable_size, means we would have to actually allocate memory, many times, just to precisely determine how many entries (keys) could be added and stay below some size budget, for the current state. (In a draft, I got this working, and then realized the balance of speed vs. accuracy was all wrong.) So related to that, I have made CalculateSpace, an internal-only API only used for testing, non-authoritative also if optimize_filters_for_memory is enabled. This simplifies some code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7774 Test Plan: unit test updated, and for FilterSize test, range of tested values is greatly expanded (still super fast) Also tested `db_bench -benchmarks=fillrandom,stats -bloom_bits=10 -num=1000000 -partition_index_and_filters -format_version=5 [-optimize_filters_for_memory] [-use_ribbon_filter]` with temporary debug output of generated filter sizes. Bloom+optimize_filters_for_memory: 1 Filter size: 197 (224 in memory) 134 Filter size: 3525 (3584 in memory) 107 Filter size: 4037 (4096 in memory) Total on disk: 904,506 Total in memory: 918,752 Ribbon+optimize_filters_for_memory: 1 Filter size: 3061 (3072 in memory) 110 Filter size: 3573 (3584 in memory) 58 Filter size: 4085 (4096 in memory) Total on disk: 633,021 (-30.0%) Total in memory: 634,880 (-30.9%) Bloom (no offm): 1 Filter size: 261 (320 in memory) 1 Filter size: 3333 (3584 in memory) 240 Filter size: 3717 (4096 in memory) Total on disk: 895,674 (-1% on disk vs. +offm; known tolerable overhead of offm) Total in memory: 986,944 (+7.4% vs. +offm) Ribbon (no offm): 1 Filter size: 2949 (3072 in memory) 1 Filter size: 3381 (3584 in memory) 167 Filter size: 3701 (4096 in memory) Total on disk: 624,397 (-30.3% vs. Bloom) Total in memory: 690,688 (-30.0% vs. Bloom) Note that optimize_filters_for_memory is even more effective for Ribbon filter than for cache-local Bloom, because it can close the unused memory gap even tighter than Bloom filter, because of 16 byte increments for Ribbon vs. 64 byte increments for Bloom. Reviewed By: jay-zhuang Differential Revision: D25592970 Pulled By: pdillinger fbshipit-source-id: 606fdaa025bb790d7e9c21601e8ea86e10541912
2020-12-18 23:29:48 +01:00
if (GetParam() == BloomFilterPolicy::kStandard128Ribbon) {
// ~ 30% savings vs. Bloom filter
ex_min_total_size = 7 * ex_min_total_size / 10;
}
Minimize memory internal fragmentation for Bloom filters (#6427) Summary: New experimental option BBTO::optimize_filters_for_memory builds filters that maximize their use of "usable size" from malloc_usable_size, which is also used to compute block cache charges. Rather than always "rounding up," we track state in the BloomFilterPolicy object to mix essentially "rounding down" and "rounding up" so that the average FP rate of all generated filters is the same as without the option. (YMMV as heavily accessed filters might be unluckily lower accuracy.) Thus, the option near-minimizes what the block cache considers as "memory used" for a given target Bloom filter false positive rate and Bloom filter implementation. There are no forward or backward compatibility issues with this change, though it only works on the format_version=5 Bloom filter. With Jemalloc, we see about 10% reduction in memory footprint (and block cache charge) for Bloom filters, but 1-2% increase in storage footprint, due to encoding efficiency losses (FP rate is non-linear with bits/key). Why not weighted random round up/down rather than state tracking? By only requiring malloc_usable_size, we don't actually know what the next larger and next smaller usable sizes for the allocator are. We pick a requested size, accept and use whatever usable size it has, and use the difference to inform our next choice. This allows us to narrow in on the right balance without tracking/predicting usable sizes. Why not weight history of generated filter false positive rates by number of keys? This could lead to excess skew in small filters after generating a large filter. Results from filter_bench with jemalloc (irrelevant details omitted): (normal keys/filter, but high variance) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.6278 Number of filters: 5516 Total size (MB): 200.046 Reported total allocated memory (MB): 220.597 Reported internal fragmentation: 10.2732% Bits/key stored: 10.0097 Average FP rate %: 0.965228 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.5104 Number of filters: 5464 Total size (MB): 200.015 Reported total allocated memory (MB): 200.322 Reported internal fragmentation: 0.153709% Bits/key stored: 10.1011 Average FP rate %: 0.966313 (very few keys / filter, optimization not as effective due to ~59 byte internal fragmentation in blocked Bloom filter representation) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.5649 Number of filters: 162950 Total size (MB): 200.001 Reported total allocated memory (MB): 224.624 Reported internal fragmentation: 12.3117% Bits/key stored: 10.2951 Average FP rate %: 0.821534 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 31.8057 Number of filters: 159849 Total size (MB): 200 Reported total allocated memory (MB): 208.846 Reported internal fragmentation: 4.42297% Bits/key stored: 10.4948 Average FP rate %: 0.811006 (high keys/filter) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.7017 Number of filters: 164 Total size (MB): 200.352 Reported total allocated memory (MB): 221.5 Reported internal fragmentation: 10.5552% Bits/key stored: 10.0003 Average FP rate %: 0.969358 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.7131 Number of filters: 160 Total size (MB): 200.928 Reported total allocated memory (MB): 200.938 Reported internal fragmentation: 0.00448054% Bits/key stored: 10.1852 Average FP rate %: 0.963387 And from db_bench (block cache) with jemalloc: $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17063835 $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17430747 $ #^ 2.1% additional filter storage $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8440400 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 21087528 rocksdb.bloom.filter.useful COUNT : 4963889 rocksdb.bloom.filter.full.positive COUNT : 1214081 rocksdb.bloom.filter.full.true.positive COUNT : 1161999 $ #^ 1.04 % observed FP rate $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8448592 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 18220328 rocksdb.bloom.filter.useful COUNT : 5360933 rocksdb.bloom.filter.full.positive COUNT : 1321315 rocksdb.bloom.filter.full.true.positive COUNT : 1262999 $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters (Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427 Test Plan: unit test added, 'make check' with gcc, clang and valgrind Reviewed By: siying Differential Revision: D22124374 Pulled By: pdillinger fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 22:30:57 +02:00
EXPECT_GE(static_cast<int64_t>(total_size), ex_min_total_size);
int64_t blocked_bloom_overhead = nfilters * (CACHE_LINE_SIZE + 5);
if (GetParam() == BloomFilterPolicy::kLegacyBloom) {
// this config can add extra cache line to make odd number
blocked_bloom_overhead += nfilters * CACHE_LINE_SIZE;
}
EXPECT_GE(total_mem, total_size);
// optimize_filters_for_memory not implemented with legacy Bloom
if (offm && GetParam() != BloomFilterPolicy::kLegacyBloom) {
// This value can include a small extra penalty for kExtraPadding
fprintf(stderr, "Internal fragmentation (optimized): %g%%\n",
(total_mem - total_size) * 100.0 / total_size);
// Less than 1% internal fragmentation
EXPECT_LE(total_mem, total_size * 101 / 100);
// Up to 2% storage penalty
EXPECT_LE(static_cast<int64_t>(total_size),
ex_min_total_size * 102 / 100 + blocked_bloom_overhead);
} else {
fprintf(stderr, "Internal fragmentation (not optimized): %g%%\n",
(total_mem - total_size) * 100.0 / total_size);
// TODO: add control checks for more allocators?
#ifdef ROCKSDB_JEMALLOC
fprintf(stderr, "Jemalloc detected? %d\n", HasJemalloc());
if (HasJemalloc()) {
#ifdef ROCKSDB_MALLOC_USABLE_SIZE
Minimize memory internal fragmentation for Bloom filters (#6427) Summary: New experimental option BBTO::optimize_filters_for_memory builds filters that maximize their use of "usable size" from malloc_usable_size, which is also used to compute block cache charges. Rather than always "rounding up," we track state in the BloomFilterPolicy object to mix essentially "rounding down" and "rounding up" so that the average FP rate of all generated filters is the same as without the option. (YMMV as heavily accessed filters might be unluckily lower accuracy.) Thus, the option near-minimizes what the block cache considers as "memory used" for a given target Bloom filter false positive rate and Bloom filter implementation. There are no forward or backward compatibility issues with this change, though it only works on the format_version=5 Bloom filter. With Jemalloc, we see about 10% reduction in memory footprint (and block cache charge) for Bloom filters, but 1-2% increase in storage footprint, due to encoding efficiency losses (FP rate is non-linear with bits/key). Why not weighted random round up/down rather than state tracking? By only requiring malloc_usable_size, we don't actually know what the next larger and next smaller usable sizes for the allocator are. We pick a requested size, accept and use whatever usable size it has, and use the difference to inform our next choice. This allows us to narrow in on the right balance without tracking/predicting usable sizes. Why not weight history of generated filter false positive rates by number of keys? This could lead to excess skew in small filters after generating a large filter. Results from filter_bench with jemalloc (irrelevant details omitted): (normal keys/filter, but high variance) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.6278 Number of filters: 5516 Total size (MB): 200.046 Reported total allocated memory (MB): 220.597 Reported internal fragmentation: 10.2732% Bits/key stored: 10.0097 Average FP rate %: 0.965228 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.5104 Number of filters: 5464 Total size (MB): 200.015 Reported total allocated memory (MB): 200.322 Reported internal fragmentation: 0.153709% Bits/key stored: 10.1011 Average FP rate %: 0.966313 (very few keys / filter, optimization not as effective due to ~59 byte internal fragmentation in blocked Bloom filter representation) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.5649 Number of filters: 162950 Total size (MB): 200.001 Reported total allocated memory (MB): 224.624 Reported internal fragmentation: 12.3117% Bits/key stored: 10.2951 Average FP rate %: 0.821534 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 31.8057 Number of filters: 159849 Total size (MB): 200 Reported total allocated memory (MB): 208.846 Reported internal fragmentation: 4.42297% Bits/key stored: 10.4948 Average FP rate %: 0.811006 (high keys/filter) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.7017 Number of filters: 164 Total size (MB): 200.352 Reported total allocated memory (MB): 221.5 Reported internal fragmentation: 10.5552% Bits/key stored: 10.0003 Average FP rate %: 0.969358 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.7131 Number of filters: 160 Total size (MB): 200.928 Reported total allocated memory (MB): 200.938 Reported internal fragmentation: 0.00448054% Bits/key stored: 10.1852 Average FP rate %: 0.963387 And from db_bench (block cache) with jemalloc: $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17063835 $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17430747 $ #^ 2.1% additional filter storage $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8440400 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 21087528 rocksdb.bloom.filter.useful COUNT : 4963889 rocksdb.bloom.filter.full.positive COUNT : 1214081 rocksdb.bloom.filter.full.true.positive COUNT : 1161999 $ #^ 1.04 % observed FP rate $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8448592 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 18220328 rocksdb.bloom.filter.useful COUNT : 5360933 rocksdb.bloom.filter.full.positive COUNT : 1321315 rocksdb.bloom.filter.full.true.positive COUNT : 1262999 $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters (Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427 Test Plan: unit test added, 'make check' with gcc, clang and valgrind Reviewed By: siying Differential Revision: D22124374 Pulled By: pdillinger fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 22:30:57 +02:00
// More than 5% internal fragmentation
EXPECT_GE(total_mem, total_size * 105 / 100);
#endif // ROCKSDB_MALLOC_USABLE_SIZE
Minimize memory internal fragmentation for Bloom filters (#6427) Summary: New experimental option BBTO::optimize_filters_for_memory builds filters that maximize their use of "usable size" from malloc_usable_size, which is also used to compute block cache charges. Rather than always "rounding up," we track state in the BloomFilterPolicy object to mix essentially "rounding down" and "rounding up" so that the average FP rate of all generated filters is the same as without the option. (YMMV as heavily accessed filters might be unluckily lower accuracy.) Thus, the option near-minimizes what the block cache considers as "memory used" for a given target Bloom filter false positive rate and Bloom filter implementation. There are no forward or backward compatibility issues with this change, though it only works on the format_version=5 Bloom filter. With Jemalloc, we see about 10% reduction in memory footprint (and block cache charge) for Bloom filters, but 1-2% increase in storage footprint, due to encoding efficiency losses (FP rate is non-linear with bits/key). Why not weighted random round up/down rather than state tracking? By only requiring malloc_usable_size, we don't actually know what the next larger and next smaller usable sizes for the allocator are. We pick a requested size, accept and use whatever usable size it has, and use the difference to inform our next choice. This allows us to narrow in on the right balance without tracking/predicting usable sizes. Why not weight history of generated filter false positive rates by number of keys? This could lead to excess skew in small filters after generating a large filter. Results from filter_bench with jemalloc (irrelevant details omitted): (normal keys/filter, but high variance) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.6278 Number of filters: 5516 Total size (MB): 200.046 Reported total allocated memory (MB): 220.597 Reported internal fragmentation: 10.2732% Bits/key stored: 10.0097 Average FP rate %: 0.965228 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.5104 Number of filters: 5464 Total size (MB): 200.015 Reported total allocated memory (MB): 200.322 Reported internal fragmentation: 0.153709% Bits/key stored: 10.1011 Average FP rate %: 0.966313 (very few keys / filter, optimization not as effective due to ~59 byte internal fragmentation in blocked Bloom filter representation) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.5649 Number of filters: 162950 Total size (MB): 200.001 Reported total allocated memory (MB): 224.624 Reported internal fragmentation: 12.3117% Bits/key stored: 10.2951 Average FP rate %: 0.821534 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 31.8057 Number of filters: 159849 Total size (MB): 200 Reported total allocated memory (MB): 208.846 Reported internal fragmentation: 4.42297% Bits/key stored: 10.4948 Average FP rate %: 0.811006 (high keys/filter) $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 Build avg ns/key: 29.7017 Number of filters: 164 Total size (MB): 200.352 Reported total allocated memory (MB): 221.5 Reported internal fragmentation: 10.5552% Bits/key stored: 10.0003 Average FP rate %: 0.969358 $ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory Build avg ns/key: 30.7131 Number of filters: 160 Total size (MB): 200.928 Reported total allocated memory (MB): 200.938 Reported internal fragmentation: 0.00448054% Bits/key stored: 10.1852 Average FP rate %: 0.963387 And from db_bench (block cache) with jemalloc: $ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false $ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17063835 $ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }' 17430747 $ #^ 2.1% additional filter storage $ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8440400 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 21087528 rocksdb.bloom.filter.useful COUNT : 4963889 rocksdb.bloom.filter.full.positive COUNT : 1214081 rocksdb.bloom.filter.full.true.positive COUNT : 1161999 $ #^ 1.04 % observed FP rate $ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000 rocksdb.block.cache.index.add COUNT : 33 rocksdb.block.cache.index.bytes.insert COUNT : 8448592 rocksdb.block.cache.filter.add COUNT : 33 rocksdb.block.cache.filter.bytes.insert COUNT : 18220328 rocksdb.bloom.filter.useful COUNT : 5360933 rocksdb.bloom.filter.full.positive COUNT : 1321315 rocksdb.bloom.filter.full.true.positive COUNT : 1262999 $ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters (Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427 Test Plan: unit test added, 'make check' with gcc, clang and valgrind Reviewed By: siying Differential Revision: D22124374 Pulled By: pdillinger fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
2020-06-22 22:30:57 +02:00
}
#endif // ROCKSDB_JEMALLOC
// No storage penalty, just usual overhead
EXPECT_LE(static_cast<int64_t>(total_size),
ex_min_total_size + blocked_bloom_overhead);
}
}
}
Account Bloom/Ribbon filter construction memory in global memory limit (#9073) Summary: Note: This PR is the 4th part of a bigger PR stack (https://github.com/facebook/rocksdb/pull/9073) and will rebase/merge only after the first three PRs (https://github.com/facebook/rocksdb/pull/9070, https://github.com/facebook/rocksdb/pull/9071, https://github.com/facebook/rocksdb/pull/9130) merge. **Context:** Similar to https://github.com/facebook/rocksdb/pull/8428, this PR is to track memory usage during (new) Bloom Filter (i.e,FastLocalBloom) and Ribbon Filter (i.e, Ribbon128) construction, moving toward the goal of [single global memory limit using block cache capacity](https://github.com/facebook/rocksdb/wiki/Projects-Being-Developed#improving-memory-efficiency). It also constrains the size of the banding portion of Ribbon Filter during construction by falling back to Bloom Filter if that banding is, at some point, larger than the available space in the cache under `LRUCacheOptions::strict_capacity_limit=true`. The option to turn on this feature is `BlockBasedTableOptions::reserve_table_builder_memory = true` which by default is set to `false`. We [decided](https://github.com/facebook/rocksdb/pull/9073#discussion_r741548409) not to have separate option for separate memory user in table building therefore their memory accounting are all bundled under one general option. **Summary:** - Reserved/released cache for creation/destruction of three main memory users with the passed-in `FilterBuildingContext::cache_res_mgr` during filter construction: - hash entries (i.e`hash_entries`.size(), we bucket-charge hash entries during insertion for performance), - banding (Ribbon Filter only, `bytes_coeff_rows` +`bytes_result_rows` + `bytes_backtrack`), - final filter (i.e, `mutable_buf`'s size). - Implementation details: in order to use `CacheReservationManager::CacheReservationHandle` to account final filter's memory, we have to store the `CacheReservationManager` object and `CacheReservationHandle` for final filter in `XXPH3BitsFilterBuilder` as well as explicitly delete the filter bits builder when done with the final filter in block based table. - Added option fo run `filter_bench` with this memory reservation feature Pull Request resolved: https://github.com/facebook/rocksdb/pull/9073 Test Plan: - Added new tests in `db_bloom_filter_test` to verify filter construction peak cache reservation under combination of `BlockBasedTable::Rep::FilterType` (e.g, `kFullFilter`, `kPartitionedFilter`), `BloomFilterPolicy::Mode`(e.g, `kFastLocalBloom`, `kStandard128Ribbon`, `kDeprecatedBlock`) and `BlockBasedTableOptions::reserve_table_builder_memory` - To address the concern for slow test: tests with memory reservation under `kFullFilter` + `kStandard128Ribbon` and `kPartitionedFilter` take around **3000 - 6000 ms** and others take around **1500 - 2000 ms**, in total adding **20000 - 25000 ms** to the test suit running locally - Added new test in `bloom_test` to verify Ribbon Filter fallback on large banding in FullFilter - Added test in `filter_bench` to verify that this feature does not significantly slow down Bloom/Ribbon Filter construction speed. Local result averaged over **20** run as below: - FastLocalBloom - baseline `./filter_bench -impl=2 -quick -runs 20 | grep 'Build avg'`: - **Build avg ns/key: 29.56295** (DEBUG_LEVEL=1), **29.98153** (DEBUG_LEVEL=0) - new feature (expected to be similar as above)`./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg'`: - **Build avg ns/key: 30.99046** (DEBUG_LEVEL=1), **30.48867** (DEBUG_LEVEL=0) - new feature of RibbonFilter with fallback (expected to be similar as above) `./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` : - **Build avg ns/key: 31.146975** (DEBUG_LEVEL=1), **30.08165** (DEBUG_LEVEL=0) - Ribbon128 - baseline `./filter_bench -impl=3 -quick -runs 20 | grep 'Build avg'`: - **Build avg ns/key: 129.17585** (DEBUG_LEVEL=1), **130.5225** (DEBUG_LEVEL=0) - new feature (expected to be similar as above) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg' `: - **Build avg ns/key: 131.61645** (DEBUG_LEVEL=1), **132.98075** (DEBUG_LEVEL=0) - new feature of RibbonFilter with fallback (expected to be a lot faster than above due to fallback) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` : - **Build avg ns/key: 52.032965** (DEBUG_LEVEL=1), **52.597825** (DEBUG_LEVEL=0) - And the warning message of `"Cache reservation for Ribbon filter banding failed due to cache full"` is indeed logged to console. Reviewed By: pdillinger Differential Revision: D31991348 Pulled By: hx235 fbshipit-source-id: 9336b2c60f44d530063da518ceaf56dac5f9df8e
2021-11-18 18:41:10 +01:00
TEST(FullBloomFilterConstructionReserveMemTest,
RibbonFilterFallBackOnLargeBanding) {
constexpr std::size_t kCacheCapacity =
8 * CacheReservationManager::GetDummyEntrySize();
constexpr std::size_t num_entries_for_cache_full = kCacheCapacity / 8;
for (bool reserve_builder_mem : {true, false}) {
bool will_fall_back = reserve_builder_mem;
BlockBasedTableOptions table_options;
table_options.reserve_table_builder_memory = reserve_builder_mem;
LRUCacheOptions lo;
lo.capacity = kCacheCapacity;
lo.num_shard_bits = 0; // 2^0 shard
lo.strict_capacity_limit = true;
std::shared_ptr<Cache> cache(NewLRUCache(lo));
table_options.block_cache = cache;
table_options.filter_policy.reset(new BloomFilterPolicy(
FLAGS_bits_per_key, BloomFilterPolicy::Mode::kStandard128Ribbon));
FilterBuildingContext ctx(table_options);
std::unique_ptr<FilterBitsBuilder> filter_bits_builder(
table_options.filter_policy->GetBuilderWithContext(ctx));
char key_buffer[sizeof(int)];
for (std::size_t i = 0; i < num_entries_for_cache_full; ++i) {
filter_bits_builder->AddKey(Key(static_cast<int>(i), key_buffer));
}
std::unique_ptr<const char[]> buf;
Slice filter = filter_bits_builder->Finish(&buf);
// To verify Ribbon Filter fallbacks to Bloom Filter properly
// based on cache reservation result
// See BloomFilterPolicy::GetBloomBitsReader re: metadata
// -1 = Marker for newer Bloom implementations
// -2 = Marker for Standard128 Ribbon
if (will_fall_back) {
EXPECT_EQ(filter.data()[filter.size() - 5], static_cast<char>(-1));
} else {
EXPECT_EQ(filter.data()[filter.size() - 5], static_cast<char>(-2));
}
}
}
namespace {
inline uint32_t SelectByCacheLineSize(uint32_t for64, uint32_t for128,
uint32_t for256) {
(void)for64;
(void)for128;
(void)for256;
#if CACHE_LINE_SIZE == 64
return for64;
#elif CACHE_LINE_SIZE == 128
return for128;
#elif CACHE_LINE_SIZE == 256
return for256;
#else
#error "CACHE_LINE_SIZE unknown or unrecognized"
#endif
}
} // namespace
// Ensure the implementation doesn't accidentally change in an
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
// incompatible way. This test doesn't check the reading side
// (FirstFPs/PackedMatches) for LegacyBloom because it requires the
// ability to read filters generated using other cache line sizes.
// See RawSchema.
TEST_P(FullBloomTest, Schema) {
#define EXPECT_EQ_Bloom(a, b) \
{ \
if (GetParam() != BloomFilterPolicy::kStandard128Ribbon) { \
EXPECT_EQ(a, b); \
} \
}
#define EXPECT_EQ_Ribbon(a, b) \
{ \
if (GetParam() == BloomFilterPolicy::kStandard128Ribbon) { \
EXPECT_EQ(a, b); \
} \
}
#define EXPECT_EQ_FastBloom(a, b) \
{ \
if (GetParam() == BloomFilterPolicy::kFastLocalBloom) { \
EXPECT_EQ(a, b); \
} \
}
#define EXPECT_EQ_LegacyBloom(a, b) \
{ \
if (GetParam() == BloomFilterPolicy::kLegacyBloom) { \
EXPECT_EQ(a, b); \
} \
}
#define EXPECT_EQ_NotLegacy(a, b) \
{ \
if (GetParam() != BloomFilterPolicy::kLegacyBloom) { \
EXPECT_EQ(a, b); \
} \
Experimental (production candidate) SST schema for Ribbon filter (#7658) Summary: Added experimental public API for Ribbon filter: NewExperimentalRibbonFilterPolicy(). This experimental API will take a "Bloom equivalent" bits per key, and configure the Ribbon filter for the same FP rate as Bloom would have but ~30% space savings. (Note: optimize_filters_for_memory is not yet implemented for Ribbon filter. That can be added with no effect on schema.) Internally, the Ribbon filter is configured using a "one_in_fp_rate" value, which is 1 over desired FP rate. For example, use 100 for 1% FP rate. I'm expecting this will be used in the future for configuring Bloom-like filters, as I expect people to more commonly hold constant the filter accuracy and change the space vs. time trade-off, rather than hold constant the space (per key) and change the accuracy vs. time trade-off, though we might make that available. ### Benchmarking ``` $ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing Building... Build avg ns/key: 34.1341 Number of filters: 1993 Total size (MB): 238.488 Reported total allocated memory (MB): 262.875 Reported internal fragmentation: 10.2255% Bits/key stored: 10.0029 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 18.7508 Random filter net ns/op: 258.246 Average FP rate %: 0.968672 ---------------------------- Done. (For more info, run with -legend or -help.) $ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing Building... Build avg ns/key: 130.851 Number of filters: 1993 Total size (MB): 168.166 Reported total allocated memory (MB): 183.211 Reported internal fragmentation: 8.94626% Bits/key stored: 7.05341 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 58.4523 Random filter net ns/op: 363.717 Average FP rate %: 0.952978 ---------------------------- Done. (For more info, run with -legend or -help.) ``` 168.166 / 238.488 = 0.705 -> 29.5% space reduction 130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction) ### Working around a hashing "flaw" bloom_test discovered a flaw in the simple hashing applied in StandardHasher when num_starts == 1 (num_slots == 128), showing an excessively high FP rate. The problem is that when many entries, on the order of number of hash bits or kCoeffBits, are associated with the same start location, the correlation between the CoeffRow and ResultRow (for efficiency) can lead to a solution that is "universal," or nearly so, for entries mapping to that start location. (Normally, variance in start location breaks the effective association between CoeffRow and ResultRow; the same value for CoeffRow is effectively different if start locations are different.) Without kUseSmash and with num_starts > 1 (thus num_starts ~= num_slots), this flaw should be completely irrelevant. Even with 10M slots, the chances of a single slot having just 16 (or more) entries map to it--not enough to cause an FP problem, which would be local to that slot if it happened--is 1 in millions. This spreadsheet formula shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE))) As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is intended for CPU efficiency of filters with many more entries/slots than kCoeffBits, a very reasonable work-around is to disallow num_starts==1 when !kUseSmash, by making the minimum non-zero number of slots 2*kCoeffBits. This is the work-around I've applied. This also means that the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not space-efficient for less than a few hundred entries. Because of this, I have made it fall back on constructing a Bloom filter, under existing schema, when that is more space efficient for small filters. (We can change this in the future if we want.) TODO: better unit tests for this case in ribbon_test, and probably update StandardHasher for kUseSmash case so that it can scale nicely to small filters. ### Other related changes * Add Ribbon filter to stress/crash test * Add Ribbon filter to filter_bench as -impl=3 * Add option string support, as in "filter_policy=experimental_ribbon:5.678;" where 5.678 is the Bloom equivalent bits per key. * Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom * Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on binary searching CalculateSpace (inefficient), so that subclasses (especially experimental ones) don't have to provide an efficient implementation inverting CalculateSpace. * Minor refactor FastLocalBloomBitsBuilder for new base class XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder, which allows the latter to fall back on Bloom construction in some extreme cases. * Mostly updated bloom_test for Ribbon filter, though a test like FullBloomTest::Schema is a next TODO to ensure schema stability (in case this becomes production-ready schema as it is). * Add some APIs to ribbon_impl.h for configuring Ribbon filters. Although these are reasonably covered by bloom_test, TODO more unit tests in ribbon_test * Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data for constructing the linear approximations in GetNumSlotsFor95PctSuccess. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658 Test Plan: Some unit tests updated but other testing is left TODO. This is considered experimental but laying down schema compatibility as early as possible in case it proves production-quality. Also tested in stress/crash test. Reviewed By: jay-zhuang Differential Revision: D24899349 Pulled By: pdillinger fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
2020-11-13 05:45:02 +01:00
}
char buffer[sizeof(int)];
// First do a small number of keys, where Ribbon config will fall back on
// fast Bloom filter and generate the same data
ResetPolicy(5); // num_probes = 3
for (int key = 0; key < 87; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ(GetNumProbesFromFilterData(), 3);
EXPECT_EQ_NotLegacy(BloomHash(FilterData()), 4130687756U);
EXPECT_EQ_NotLegacy("31,38,40,43,61,83,86,112,125,131", FirstFPs(10));
// Now use enough keys so that changing bits / key by 1 is guaranteed to
// change number of allocated cache lines. So keys > max cache line bits.
// Note that the first attempted Ribbon seed is determined by the hash
// of the first key added (for pseudorandomness in practice, determinism in
// testing)
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(2); // num_probes = 1
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 1);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(1567096579, 1964771444, 2659542661U));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 3817481309U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 1705851228U);
EXPECT_EQ_FastBloom("11,13,17,25,29,30,35,37,45,53", FirstFPs(10));
EXPECT_EQ_Ribbon("3,8,10,17,19,20,23,28,31,32", FirstFPs(10));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(3); // num_probes = 2
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 2);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(2707206547U, 2571983456U, 218344685));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 2807269961U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 1095342358U);
EXPECT_EQ_FastBloom("4,15,17,24,27,28,29,53,63,70", FirstFPs(10));
EXPECT_EQ_Ribbon("3,17,20,28,32,33,36,43,49,54", FirstFPs(10));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(5); // num_probes = 3
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 3);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(515748486, 94611728, 2436112214U));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 204628445U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 3971337699U);
EXPECT_EQ_FastBloom("15,24,29,39,53,87,89,100,103,104", FirstFPs(10));
EXPECT_EQ_Ribbon("3,33,36,43,67,70,76,78,84,102", FirstFPs(10));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(8); // num_probes = 5
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 5);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(1302145999, 2811644657U, 756553699));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 355564975U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 3651449053U);
EXPECT_EQ_FastBloom("16,60,66,126,220,238,244,256,265,287", FirstFPs(10));
EXPECT_EQ_Ribbon("33,187,203,296,300,322,411,419,547,582", FirstFPs(10));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(9); // num_probes = 6
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 6);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(2092755149, 661139132, 1182970461));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 2137566013U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 1005676675U);
EXPECT_EQ_FastBloom("156,367,791,872,945,1015,1139,1159,1265", FirstFPs(9));
EXPECT_EQ_Ribbon("33,187,203,296,411,419,604,612,615,619", FirstFPs(10));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(11); // num_probes = 7
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 7);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(3755609649U, 1812694762, 1449142939));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 2561502687U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 3129900846U);
EXPECT_EQ_FastBloom("34,74,130,236,643,882,962,1015,1035,1110", FirstFPs(10));
EXPECT_EQ_Ribbon("411,419,623,665,727,794,955,1052,1323,1330", FirstFPs(10));
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
// This used to be 9 probes, but 8 is a better choice for speed,
// especially with SIMD groups of 8 probes, with essentially no
// change in FP rate.
// FP rate @ 9 probes, old Bloom: 0.4321%
// FP rate @ 9 probes, new Bloom: 0.1846%
// FP rate @ 8 probes, new Bloom: 0.1843%
ResetPolicy(14); // num_probes = 8 (new), 9 (old)
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_LegacyBloom(GetNumProbesFromFilterData(), 9);
EXPECT_EQ_FastBloom(GetNumProbesFromFilterData(), 8);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(178861123, 379087593, 2574136516U));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 3709876890U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 1855638875U);
EXPECT_EQ_FastBloom("130,240,522,565,989,2002,2526,3147,3543", FirstFPs(9));
EXPECT_EQ_Ribbon("665,727,1323,1755,3866,4232,4442,4492,4736", FirstFPs(9));
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
// This used to be 11 probes, but 9 is a better choice for speed
// AND accuracy.
// FP rate @ 11 probes, old Bloom: 0.3571%
// FP rate @ 11 probes, new Bloom: 0.0884%
// FP rate @ 9 probes, new Bloom: 0.0843%
ResetPolicy(16); // num_probes = 9 (new), 11 (old)
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_LegacyBloom(GetNumProbesFromFilterData(), 11);
EXPECT_EQ_FastBloom(GetNumProbesFromFilterData(), 9);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(1129406313, 3049154394U, 1727750964));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 1087138490U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 459379967U);
EXPECT_EQ_FastBloom("3299,3611,3916,6620,7822,8079,8482,8942", FirstFPs(8));
EXPECT_EQ_Ribbon("727,1323,1755,4442,4736,5386,6974,7154,8222", FirstFPs(9));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(10); // num_probes = 6, but different memory ratio vs. 9
for (int key = 0; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 6);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 61);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(1478976371, 2910591341U, 1182970461));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 2498541272U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 1273231667U);
EXPECT_EQ_FastBloom("16,126,133,422,466,472,813,1002,1035", FirstFPs(9));
EXPECT_EQ_Ribbon("296,411,419,612,619,623,630,665,686,727", FirstFPs(10));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(10);
for (int key = /*CHANGED*/ 1; key < 2087; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 6);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), /*CHANGED*/ 184);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(4205696321U, 1132081253U, 2385981855U));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 2058382345U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 3007790572U);
EXPECT_EQ_FastBloom("16,126,133,422,466,472,813,1002,1035", FirstFPs(9));
EXPECT_EQ_Ribbon("33,152,383,497,589,633,737,781,911,990", FirstFPs(10));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
ResetPolicy(10);
for (int key = 1; key < /*CHANGED*/ 2088; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 6);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 184);
EXPECT_EQ_LegacyBloom(
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
BloomHash(FilterData()),
SelectByCacheLineSize(2885052954U, 769447944, 4175124908U));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 23699164U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 1942323379U);
EXPECT_EQ_FastBloom("16,126,133,422,466,472,813,1002,1035", FirstFPs(9));
EXPECT_EQ_Ribbon("33,95,360,589,737,911,990,1048,1081,1414", FirstFPs(10));
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
// With new fractional bits_per_key, check that we are rounding to
// whole bits per key for old Bloom filters but fractional for
// new Bloom filter.
ResetPolicy(9.5);
for (int key = 1; key < 2088; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_Bloom(GetNumProbesFromFilterData(), 6);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 184);
EXPECT_EQ_LegacyBloom(
BloomHash(FilterData()),
/*SAME*/ SelectByCacheLineSize(2885052954U, 769447944, 4175124908U));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 3166884174U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 1148258663U);
EXPECT_EQ_FastBloom("126,156,367,444,458,791,813,976,1015", FirstFPs(9));
EXPECT_EQ_Ribbon("33,54,95,360,589,693,737,911,990,1048", FirstFPs(10));
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
ResetPolicy(10.499);
for (int key = 1; key < 2088; key++) {
Add(Key(key, buffer));
}
Build();
EXPECT_EQ_LegacyBloom(GetNumProbesFromFilterData(), 6);
EXPECT_EQ_FastBloom(GetNumProbesFromFilterData(), 7);
EXPECT_EQ_Ribbon(GetRibbonSeedFromFilterData(), 184);
EXPECT_EQ_LegacyBloom(
BloomHash(FilterData()),
/*SAME*/ SelectByCacheLineSize(2885052954U, 769447944, 4175124908U));
EXPECT_EQ_FastBloom(BloomHash(FilterData()), 4098502778U);
EXPECT_EQ_Ribbon(BloomHash(FilterData()), 792138188U);
EXPECT_EQ_FastBloom("16,236,240,472,1015,1045,1111,1409,1465", FirstFPs(9));
EXPECT_EQ_Ribbon("33,95,360,589,737,990,1048,1081,1414,1643", FirstFPs(10));
Allow fractional bits/key in BloomFilterPolicy (#6092) Summary: There's no technological impediment to allowing the Bloom filter bits/key to be non-integer (fractional/decimal) values, and it provides finer control over the memory vs. accuracy trade-off. This is especially handy in using the format_version=5 Bloom filter in place of the old one, because bits_per_key=9.55 provides the same accuracy as the old bits_per_key=10. This change not only requires refining the logic for choosing the best num_probes for a given bits/key setting, it revealed a flaw in that logic. As bits/key gets higher, the best num_probes for a cache-local Bloom filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a standard Bloom filter. For example, at 16 bits per key, the best num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%). This change fixes and refines that logic (for the format_version=5 Bloom filter only, just in case) based on empirical tests to find accuracy inflection points between each num_probes. Although bits_per_key is now specified as a double, the new Bloom filter converts/rounds this to "millibits / key" for predictable/precise internal computations. Just in case of unforeseen compatibility issues, we round to the nearest whole number bits / key for the legacy Bloom filter, so as not to unlock new behaviors for it. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092 Test Plan: unit tests included Differential Revision: D18711313 Pulled By: pdillinger fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
2019-11-27 00:49:16 +01:00
ResetPolicy();
}
// A helper class for testing custom or corrupt filter bits as read by
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
// built-in FilterBitsReaders.
struct RawFilterTester {
// Buffer, from which we always return a tail Slice, so the
// last five bytes are always the metadata bytes.
std::array<char, 3000> data_;
// Points five bytes from the end
char* metadata_ptr_;
RawFilterTester() : metadata_ptr_(&*(data_.end() - 5)) {}
Slice ResetNoFill(uint32_t len_without_metadata, uint32_t num_lines,
uint32_t num_probes) {
metadata_ptr_[0] = static_cast<char>(num_probes);
EncodeFixed32(metadata_ptr_ + 1, num_lines);
uint32_t len = len_without_metadata + /*metadata*/ 5;
assert(len <= data_.size());
return Slice(metadata_ptr_ - len_without_metadata, len);
}
Slice Reset(uint32_t len_without_metadata, uint32_t num_lines,
uint32_t num_probes, bool fill_ones) {
data_.fill(fill_ones ? 0xff : 0);
return ResetNoFill(len_without_metadata, num_lines, num_probes);
}
Slice ResetWeirdFill(uint32_t len_without_metadata, uint32_t num_lines,
uint32_t num_probes) {
for (uint32_t i = 0; i < data_.size(); ++i) {
data_[i] = static_cast<char>(0x7b7b >> (i % 7));
}
return ResetNoFill(len_without_metadata, num_lines, num_probes);
}
};
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
TEST_P(FullBloomTest, RawSchema) {
RawFilterTester cft;
// Legacy Bloom configurations
// Two probes, about 3/4 bits set: ~50% "FP" rate
// One 256-byte cache line.
OpenRaw(cft.ResetWeirdFill(256, 1, 2));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
EXPECT_EQ(uint64_t{11384799501900898790U}, PackedMatches());
// Two 128-byte cache lines.
OpenRaw(cft.ResetWeirdFill(256, 2, 2));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
EXPECT_EQ(uint64_t{10157853359773492589U}, PackedMatches());
// Four 64-byte cache lines.
OpenRaw(cft.ResetWeirdFill(256, 4, 2));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
EXPECT_EQ(uint64_t{7123594913907464682U}, PackedMatches());
// Fast local Bloom configurations (marker 255 -> -1)
// Two probes, about 3/4 bits set: ~50% "FP" rate
// Four 64-byte cache lines.
OpenRaw(cft.ResetWeirdFill(256, 2U << 8, 255));
EXPECT_EQ(uint64_t{9957045189927952471U}, PackedMatches());
// Ribbon configurations (marker 254 -> -2)
// Even though the builder never builds configurations this
// small (preferring Bloom), we can test that the configuration
// can be read, for possible future-proofing.
// 256 slots, one result column = 32 bytes (2 blocks, seed 0)
// ~50% FP rate:
// 0b0101010111110101010000110000011011011111100100001110010011101010
OpenRaw(cft.ResetWeirdFill(32, 2U << 8, 254));
EXPECT_EQ(uint64_t{6193930559317665002U}, PackedMatches());
// 256 slots, three-to-four result columns = 112 bytes
// ~ 1 in 10 FP rate:
// 0b0000000000100000000000000000000001000001000000010000101000000000
OpenRaw(cft.ResetWeirdFill(112, 2U << 8, 254));
EXPECT_EQ(uint64_t{9007200345328128U}, PackedMatches());
}
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
TEST_P(FullBloomTest, CorruptFilters) {
RawFilterTester cft;
for (bool fill : {false, true}) {
// Legacy Bloom configurations
// Good filter bits - returns same as fill
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 1, 6, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Good filter bits - returns same as fill
OpenRaw(cft.Reset(CACHE_LINE_SIZE * 3, 3, 6, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Good filter bits - returns same as fill
// 256 is unusual but legal cache line size
OpenRaw(cft.Reset(256 * 3, 3, 6, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Good filter bits - returns same as fill
// 30 should be max num_probes
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 1, 30, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Good filter bits - returns same as fill
// 1 should be min num_probes
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 1, 1, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Type 1 trivial filter bits - returns true as if FP by zero probes
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 1, 0, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// Type 2 trivial filter bits - returns false as if built from zero keys
OpenRaw(cft.Reset(0, 0, 6, fill));
ASSERT_FALSE(Matches("hello"));
ASSERT_FALSE(Matches("world"));
// Type 2 trivial filter bits - returns false as if built from zero keys
OpenRaw(cft.Reset(0, 37, 6, fill));
ASSERT_FALSE(Matches("hello"));
ASSERT_FALSE(Matches("world"));
// Type 2 trivial filter bits - returns false as 0 size trumps 0 probes
OpenRaw(cft.Reset(0, 0, 0, fill));
ASSERT_FALSE(Matches("hello"));
ASSERT_FALSE(Matches("world"));
// Bad filter bits - returns true for safety
// No solution to 0 * x == CACHE_LINE_SIZE
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 0, 6, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// Bad filter bits - returns true for safety
// Can't have 3 * x == 4 for integer x
OpenRaw(cft.Reset(4, 3, 6, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// Bad filter bits - returns true for safety
// 97 bytes is not a power of two, so not a legal cache line size
OpenRaw(cft.Reset(97 * 3, 3, 6, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
Refactor / clean up / optimize FullFilterBitsReader (#5941) Summary: FullFilterBitsReader, after creating in BloomFilterPolicy, was responsible for decoding metadata bits. This meant that FullFilterBitsReader::MayMatch had some metadata checks in order to implement "always true" or "always false" functionality in the case of inconsistent or trivial metadata. This made for ugly mixing-of-concerns code and probably had some runtime cost. It also didn't really support plugging in alternative filter implementations with extensions to the existing metadata schema. BloomFilterPolicy::GetFilterBitsReader is now (exclusively) responsible for decoding filter metadata bits and constructing appropriate instances deriving from FilterBitsReader. "Always false" and "always true" derived classes allow FullFilterBitsReader not to be concerned with handling of trivial or inconsistent metadata. This also makes for easy expansion to alternative filter implementations in new, alternative derived classes. This change makes calls to FilterBitsReader::MayMatch *necessarily* virtual because there's now more than one built-in implementation. Compared with the previous implementation's extra 'if' checks in MayMatch, there's no consistent performance difference, measured by (an older revision of) filter_bench (differences here seem to be within noise): Inside queries... - Dry run (407) ns/op: 35.9996 + Dry run (407) ns/op: 35.2034 - Single filter ns/op: 47.5483 + Single filter ns/op: 47.4034 - Batched, prepared ns/op: 43.1559 + Batched, prepared ns/op: 42.2923 ... - Random filter ns/op: 150.697 + Random filter ns/op: 149.403 ---------------------------- Outside queries... - Dry run (980) ns/op: 34.6114 + Dry run (980) ns/op: 34.0405 - Single filter ns/op: 56.8326 + Single filter ns/op: 55.8414 - Batched, prepared ns/op: 48.2346 + Batched, prepared ns/op: 47.5667 - Random filter ns/op: 155.377 + Random filter ns/op: 153.942 Average FP rate %: 1.1386 Also, the FullFilterBitsReader ctor was responsible for a surprising amount of CPU in production, due in part to inefficient determination of the CACHE_LINE_SIZE used to construct the filter being read. The overwhelming common case (same as my CACHE_LINE_SIZE) is now substantially optimized, as shown with filter_bench with -new_reader_every=1 (old option - see below) (repeatable result): Inside queries... - Dry run (453) ns/op: 118.799 + Dry run (453) ns/op: 105.869 - Single filter ns/op: 82.5831 + Single filter ns/op: 74.2509 ... - Random filter ns/op: 224.936 + Random filter ns/op: 194.833 ---------------------------- Outside queries... - Dry run (aa1) ns/op: 118.503 + Dry run (aa1) ns/op: 104.925 - Single filter ns/op: 90.3023 + Single filter ns/op: 83.425 ... - Random filter ns/op: 220.455 + Random filter ns/op: 175.7 Average FP rate %: 1.13886 However PR#5936 has/will reclaim most of this cost. After that PR, the optimization of this code path is likely negligible, but nonetheless it's clear we aren't making performance any worse. Also fixed inadequate check of consistency between filter data size and num_lines. (Unit test updated.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/5941 Test Plan: previously added unit tests FullBloomTest.CorruptFilters and FullBloomTest.RawSchema Differential Revision: D18018353 Pulled By: pdillinger fbshipit-source-id: 8e04c2b4a7d93223f49a237fd52ef2483929ed9c
2019-10-18 23:49:26 +02:00
// Bad filter bits - returns true for safety
// 65 bytes is not a power of two, so not a legal cache line size
OpenRaw(cft.Reset(65 * 3, 3, 6, fill));
Refactor / clean up / optimize FullFilterBitsReader (#5941) Summary: FullFilterBitsReader, after creating in BloomFilterPolicy, was responsible for decoding metadata bits. This meant that FullFilterBitsReader::MayMatch had some metadata checks in order to implement "always true" or "always false" functionality in the case of inconsistent or trivial metadata. This made for ugly mixing-of-concerns code and probably had some runtime cost. It also didn't really support plugging in alternative filter implementations with extensions to the existing metadata schema. BloomFilterPolicy::GetFilterBitsReader is now (exclusively) responsible for decoding filter metadata bits and constructing appropriate instances deriving from FilterBitsReader. "Always false" and "always true" derived classes allow FullFilterBitsReader not to be concerned with handling of trivial or inconsistent metadata. This also makes for easy expansion to alternative filter implementations in new, alternative derived classes. This change makes calls to FilterBitsReader::MayMatch *necessarily* virtual because there's now more than one built-in implementation. Compared with the previous implementation's extra 'if' checks in MayMatch, there's no consistent performance difference, measured by (an older revision of) filter_bench (differences here seem to be within noise): Inside queries... - Dry run (407) ns/op: 35.9996 + Dry run (407) ns/op: 35.2034 - Single filter ns/op: 47.5483 + Single filter ns/op: 47.4034 - Batched, prepared ns/op: 43.1559 + Batched, prepared ns/op: 42.2923 ... - Random filter ns/op: 150.697 + Random filter ns/op: 149.403 ---------------------------- Outside queries... - Dry run (980) ns/op: 34.6114 + Dry run (980) ns/op: 34.0405 - Single filter ns/op: 56.8326 + Single filter ns/op: 55.8414 - Batched, prepared ns/op: 48.2346 + Batched, prepared ns/op: 47.5667 - Random filter ns/op: 155.377 + Random filter ns/op: 153.942 Average FP rate %: 1.1386 Also, the FullFilterBitsReader ctor was responsible for a surprising amount of CPU in production, due in part to inefficient determination of the CACHE_LINE_SIZE used to construct the filter being read. The overwhelming common case (same as my CACHE_LINE_SIZE) is now substantially optimized, as shown with filter_bench with -new_reader_every=1 (old option - see below) (repeatable result): Inside queries... - Dry run (453) ns/op: 118.799 + Dry run (453) ns/op: 105.869 - Single filter ns/op: 82.5831 + Single filter ns/op: 74.2509 ... - Random filter ns/op: 224.936 + Random filter ns/op: 194.833 ---------------------------- Outside queries... - Dry run (aa1) ns/op: 118.503 + Dry run (aa1) ns/op: 104.925 - Single filter ns/op: 90.3023 + Single filter ns/op: 83.425 ... - Random filter ns/op: 220.455 + Random filter ns/op: 175.7 Average FP rate %: 1.13886 However PR#5936 has/will reclaim most of this cost. After that PR, the optimization of this code path is likely negligible, but nonetheless it's clear we aren't making performance any worse. Also fixed inadequate check of consistency between filter data size and num_lines. (Unit test updated.) Pull Request resolved: https://github.com/facebook/rocksdb/pull/5941 Test Plan: previously added unit tests FullBloomTest.CorruptFilters and FullBloomTest.RawSchema Differential Revision: D18018353 Pulled By: pdillinger fbshipit-source-id: 8e04c2b4a7d93223f49a237fd52ef2483929ed9c
2019-10-18 23:49:26 +02:00
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// Bad filter bits - returns false as if built from zero keys
// < 5 bytes overall means missing even metadata
OpenRaw(cft.Reset(static_cast<uint32_t>(-1), 3, 6, fill));
ASSERT_FALSE(Matches("hello"));
ASSERT_FALSE(Matches("world"));
OpenRaw(cft.Reset(static_cast<uint32_t>(-5), 3, 6, fill));
ASSERT_FALSE(Matches("hello"));
ASSERT_FALSE(Matches("world"));
// Dubious filter bits - returns same as fill (for now)
// 31 is not a useful num_probes, nor generated by RocksDB unless directly
// using filter bits API without BloomFilterPolicy.
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 1, 31, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Dubious filter bits - returns same as fill (for now)
// Similar, with 127, largest positive char
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 1, 127, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Dubious filter bits - returns true (for now)
// num_probes set to 128 / -128, lowest negative char
// NB: Bug in implementation interprets this as negative and has same
// effect as zero probes, but effectively reserves negative char values
// for future use.
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 1, 128, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// Dubious filter bits - returns true (for now)
// Similar, with 253 / -3
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 1, 253, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// #########################################################
// Fast local Bloom configurations (marker 255 -> -1)
// Good config with six probes
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 6U << 8, 255, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Becomes bad/reserved config (always true) if any other byte set
OpenRaw(cft.Reset(CACHE_LINE_SIZE, (6U << 8) | 1U, 255, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
OpenRaw(cft.Reset(CACHE_LINE_SIZE, (6U << 8) | (1U << 16), 255, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
OpenRaw(cft.Reset(CACHE_LINE_SIZE, (6U << 8) | (1U << 24), 255, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// Good config, max 30 probes
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 30U << 8, 255, fill));
ASSERT_EQ(fill, Matches("hello"));
ASSERT_EQ(fill, Matches("world"));
// Bad/reserved config (always true) if more than 30
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 31U << 8, 255, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 33U << 8, 255, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 66U << 8, 255, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
OpenRaw(cft.Reset(CACHE_LINE_SIZE, 130U << 8, 255, fill));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
}
// #########################################################
// Ribbon configurations (marker 254 -> -2)
// ("fill" doesn't work to detect good configurations, we just
// have to rely on TN probability)
// Good: 2 blocks * 16 bytes / segment * 4 columns = 128 bytes
// seed = 123
OpenRaw(cft.Reset(128, (2U << 8) + 123U, 254, false));
ASSERT_FALSE(Matches("hello"));
ASSERT_FALSE(Matches("world"));
// Good: 2 blocks * 16 bytes / segment * 8 columns = 256 bytes
OpenRaw(cft.Reset(256, (2U << 8) + 123U, 254, false));
ASSERT_FALSE(Matches("hello"));
ASSERT_FALSE(Matches("world"));
// Surprisingly OK: 5000 blocks (640,000 slots) in only 1024 bits
// -> average close to 0 columns
OpenRaw(cft.Reset(128, (5000U << 8) + 123U, 254, false));
// *Almost* all FPs
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// Need many queries to find a "true negative"
for (int i = 0; Matches(ToString(i)); ++i) {
ASSERT_LT(i, 1000);
}
// Bad: 1 block not allowed (for implementation detail reasons)
OpenRaw(cft.Reset(128, (1U << 8) + 123U, 254, false));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
// Bad: 0 blocks not allowed
OpenRaw(cft.Reset(128, (0U << 8) + 123U, 254, false));
ASSERT_TRUE(Matches("hello"));
ASSERT_TRUE(Matches("world"));
}
INSTANTIATE_TEST_CASE_P(Full, FullBloomTest,
testing::Values(BloomFilterPolicy::kLegacyBloom,
Experimental (production candidate) SST schema for Ribbon filter (#7658) Summary: Added experimental public API for Ribbon filter: NewExperimentalRibbonFilterPolicy(). This experimental API will take a "Bloom equivalent" bits per key, and configure the Ribbon filter for the same FP rate as Bloom would have but ~30% space savings. (Note: optimize_filters_for_memory is not yet implemented for Ribbon filter. That can be added with no effect on schema.) Internally, the Ribbon filter is configured using a "one_in_fp_rate" value, which is 1 over desired FP rate. For example, use 100 for 1% FP rate. I'm expecting this will be used in the future for configuring Bloom-like filters, as I expect people to more commonly hold constant the filter accuracy and change the space vs. time trade-off, rather than hold constant the space (per key) and change the accuracy vs. time trade-off, though we might make that available. ### Benchmarking ``` $ ./filter_bench -impl=2 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing Building... Build avg ns/key: 34.1341 Number of filters: 1993 Total size (MB): 238.488 Reported total allocated memory (MB): 262.875 Reported internal fragmentation: 10.2255% Bits/key stored: 10.0029 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 18.7508 Random filter net ns/op: 258.246 Average FP rate %: 0.968672 ---------------------------- Done. (For more info, run with -legend or -help.) $ ./filter_bench -impl=3 -quick -m_keys_total_max=200 -average_keys_per_filter=100000 -net_includes_hashing Building... Build avg ns/key: 130.851 Number of filters: 1993 Total size (MB): 168.166 Reported total allocated memory (MB): 183.211 Reported internal fragmentation: 8.94626% Bits/key stored: 7.05341 ---------------------------- Mixed inside/outside queries... Single filter net ns/op: 58.4523 Random filter net ns/op: 363.717 Average FP rate %: 0.952978 ---------------------------- Done. (For more info, run with -legend or -help.) ``` 168.166 / 238.488 = 0.705 -> 29.5% space reduction 130.851 / 34.1341 = 3.83x construction time for this Ribbon filter vs. lastest Bloom filter (could make that as little as about 2.5x for less space reduction) ### Working around a hashing "flaw" bloom_test discovered a flaw in the simple hashing applied in StandardHasher when num_starts == 1 (num_slots == 128), showing an excessively high FP rate. The problem is that when many entries, on the order of number of hash bits or kCoeffBits, are associated with the same start location, the correlation between the CoeffRow and ResultRow (for efficiency) can lead to a solution that is "universal," or nearly so, for entries mapping to that start location. (Normally, variance in start location breaks the effective association between CoeffRow and ResultRow; the same value for CoeffRow is effectively different if start locations are different.) Without kUseSmash and with num_starts > 1 (thus num_starts ~= num_slots), this flaw should be completely irrelevant. Even with 10M slots, the chances of a single slot having just 16 (or more) entries map to it--not enough to cause an FP problem, which would be local to that slot if it happened--is 1 in millions. This spreadsheet formula shows that: =1/(10000000*(1 - POISSON(15, 1, TRUE))) As kUseSmash==false (the setting for Standard128RibbonBitsBuilder) is intended for CPU efficiency of filters with many more entries/slots than kCoeffBits, a very reasonable work-around is to disallow num_starts==1 when !kUseSmash, by making the minimum non-zero number of slots 2*kCoeffBits. This is the work-around I've applied. This also means that the new Ribbon filter schema (Standard128RibbonBitsBuilder) is not space-efficient for less than a few hundred entries. Because of this, I have made it fall back on constructing a Bloom filter, under existing schema, when that is more space efficient for small filters. (We can change this in the future if we want.) TODO: better unit tests for this case in ribbon_test, and probably update StandardHasher for kUseSmash case so that it can scale nicely to small filters. ### Other related changes * Add Ribbon filter to stress/crash test * Add Ribbon filter to filter_bench as -impl=3 * Add option string support, as in "filter_policy=experimental_ribbon:5.678;" where 5.678 is the Bloom equivalent bits per key. * Rename internal mode BloomFilterPolicy::kAuto to kAutoBloom * Add a general BuiltinFilterBitsBuilder::CalculateNumEntry based on binary searching CalculateSpace (inefficient), so that subclasses (especially experimental ones) don't have to provide an efficient implementation inverting CalculateSpace. * Minor refactor FastLocalBloomBitsBuilder for new base class XXH3pFilterBitsBuilder shared with new Standard128RibbonBitsBuilder, which allows the latter to fall back on Bloom construction in some extreme cases. * Mostly updated bloom_test for Ribbon filter, though a test like FullBloomTest::Schema is a next TODO to ensure schema stability (in case this becomes production-ready schema as it is). * Add some APIs to ribbon_impl.h for configuring Ribbon filters. Although these are reasonably covered by bloom_test, TODO more unit tests in ribbon_test * Added a "tool" FindOccupancyForSuccessRate to ribbon_test to get data for constructing the linear approximations in GetNumSlotsFor95PctSuccess. Pull Request resolved: https://github.com/facebook/rocksdb/pull/7658 Test Plan: Some unit tests updated but other testing is left TODO. This is considered experimental but laying down schema compatibility as early as possible in case it proves production-quality. Also tested in stress/crash test. Reviewed By: jay-zhuang Differential Revision: D24899349 Pulled By: pdillinger fbshipit-source-id: 9715f3e6371c959d923aea8077c9423c7a9f82b8
2020-11-13 05:45:02 +01:00
BloomFilterPolicy::kFastLocalBloom,
BloomFilterPolicy::kStandard128Ribbon));
New Bloom filter implementation for full and partitioned filters (#6007) Summary: Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter. Speed The improved speed, at least on recent x86_64, comes from * Using fastrange instead of modulo (%) * Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row. * Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc. * Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes. Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed): $ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter Build avg ns/key: 47.7135 Mixed inside/outside queries... Single filter net ns/op: 26.2825 Random filter net ns/op: 150.459 Average FP rate %: 0.954651 $ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter Build avg ns/key: 47.2245 Mixed inside/outside queries... Single filter net ns/op: 63.2978 Random filter net ns/op: 188.038 Average FP rate %: 1.13823 Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected. The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome. Accuracy The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments. Accuracy data (generalizes, except old impl gets worse with millions of keys): Memory bits per key: FP rate percent old impl -> FP rate percent new impl 6: 5.70953 -> 5.69888 8: 2.45766 -> 2.29709 10: 1.13977 -> 0.959254 12: 0.662498 -> 0.411593 16: 0.353023 -> 0.0873754 24: 0.261552 -> 0.0060971 50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP) Fixes https://github.com/facebook/rocksdb/issues/5857 Fixes https://github.com/facebook/rocksdb/issues/4120 Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized. Compatibility Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in. Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007 Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version). Differential Revision: D18294749 Pulled By: pdillinger fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
2019-11-14 01:31:26 +01:00
Add Bloom/Ribbon hybrid API support (#8679) Summary: This is essentially resurrection and fixing of the part of https://github.com/facebook/rocksdb/issues/8198 that was reverted in https://github.com/facebook/rocksdb/issues/8212, using data added in https://github.com/facebook/rocksdb/issues/8246. Basically, when configuring Ribbon filter, you can specify an LSM level before which Bloom will be used instead of Ribbon. But Bloom is only considered for Leveled and Universal compaction styles and file going into a known LSM level. This way, SST file writer, FIFO compaction, etc. use Ribbon filter as you would expect with NewRibbonFilterPolicy. So that this can be controlled with a single int value and so that flushes can be distinguished from intra-L0, we consider flush to go to level -1 for the purposes of this option. (Explained in API comment.) I also expect the most common and recommended Ribbon configuration to use Bloom during flush, to minimize slowing down writes and because according to my estimates, Ribbon only pays off if the structure lives in memory for more than an hour. Thus, I have changed the default for NewRibbonFilterPolicy to be this mild hybrid configuration. I don't really want to add something like NewHybridFilterPolicy because at least the mild hybrid configuration (Bloom for flush, Ribbon otherwise) should be considered a natural choice. C APIs also updated, but because they don't support overloading, rocksdb_filterpolicy_create_ribbon is kept pure ribbon for clarity and rocksdb_filterpolicy_create_ribbon_hybrid must be called for a hybrid configuration. While touching C API, I changed bits per key options from int to double. BuiltinFilterPolicy is needed so that LevelThresholdFilterPolicy doesn't inherit unused fields from BloomFilterPolicy. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8679 Test Plan: new + updated tests, including crash test Reviewed By: jay-zhuang Differential Revision: D30445797 Pulled By: pdillinger fbshipit-source-id: 6f5aeddfd6d79f7e55493b563c2d1d2d568892e1
2021-08-21 02:59:24 +02:00
static double GetEffectiveBitsPerKey(FilterBitsBuilder* builder) {
union {
uint64_t key_value;
char key_bytes[8];
};
const unsigned kNumKeys = 1000;
Slice key_slice{key_bytes, 8};
for (key_value = 0; key_value < kNumKeys; ++key_value) {
builder->AddKey(key_slice);
}
std::unique_ptr<const char[]> buf;
auto filter = builder->Finish(&buf);
return filter.size() * /*bits per byte*/ 8 / (1.0 * kNumKeys);
}
static void SetTestingLevel(int levelish, FilterBuildingContext* ctx) {
if (levelish == -1) {
// Flush is treated as level -1 for this option but actually level 0
ctx->level_at_creation = 0;
ctx->reason = TableFileCreationReason::kFlush;
} else {
ctx->level_at_creation = levelish;
ctx->reason = TableFileCreationReason::kCompaction;
}
}
TEST(RibbonTest, RibbonTestLevelThreshold) {
BlockBasedTableOptions opts;
FilterBuildingContext ctx(opts);
// A few settings
for (CompactionStyle cs : {kCompactionStyleLevel, kCompactionStyleUniversal,
kCompactionStyleFIFO, kCompactionStyleNone}) {
ctx.compaction_style = cs;
for (int bloom_before_level : {-1, 0, 1, 10}) {
std::vector<std::unique_ptr<const FilterPolicy> > policies;
policies.emplace_back(NewRibbonFilterPolicy(10, bloom_before_level));
if (bloom_before_level == -1) {
// Also test old API
policies.emplace_back(NewExperimentalRibbonFilterPolicy(10));
}
if (bloom_before_level == 0) {
// Also test old API and new API default
policies.emplace_back(NewRibbonFilterPolicy(10));
}
for (std::unique_ptr<const FilterPolicy>& policy : policies) {
// Claim to be generating filter for this level
SetTestingLevel(bloom_before_level, &ctx);
std::unique_ptr<FilterBitsBuilder> builder{
policy->GetBuilderWithContext(ctx)};
// Must be Ribbon (more space efficient than 10 bits per key)
ASSERT_LT(GetEffectiveBitsPerKey(builder.get()), 8);
if (bloom_before_level >= 0) {
// Claim to be generating filter for previous level
SetTestingLevel(bloom_before_level - 1, &ctx);
builder.reset(policy->GetBuilderWithContext(ctx));
if (cs == kCompactionStyleLevel || cs == kCompactionStyleUniversal) {
// Level is considered.
// Must be Bloom (~ 10 bits per key)
ASSERT_GT(GetEffectiveBitsPerKey(builder.get()), 9);
} else {
// Level is ignored under non-traditional compaction styles.
// Must be Ribbon (more space efficient than 10 bits per key)
ASSERT_LT(GetEffectiveBitsPerKey(builder.get()), 8);
}
}
// Like SST file writer
ctx.level_at_creation = -1;
ctx.reason = TableFileCreationReason::kMisc;
builder.reset(policy->GetBuilderWithContext(ctx));
// Must be Ribbon (more space efficient than 10 bits per key)
ASSERT_LT(GetEffectiveBitsPerKey(builder.get()), 8);
}
}
}
}
} // namespace ROCKSDB_NAMESPACE
int main(int argc, char** argv) {
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 22:08:00 +01:00
::testing::InitGoogleTest(&argc, argv);
2014-05-09 17:34:18 +02:00
ParseCommandLineFlags(&argc, &argv, true);
rocksdb: switch to gtest Summary: Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different. In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest. There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides. ```lang=bash % cat ~/transform #!/bin/sh files=$(git ls-files '*test\.cc') for file in $files do if grep -q "rocksdb::test::RunAllTests()" $file then if grep -Eq '^class \w+Test {' $file then perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file perl -pi -e 's/^(TEST)/${1}_F/g' $file fi perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file fi done % sh ~/transform % make format ``` Second iteration of this diff contains only scripted changes. Third iteration contains manual changes to fix last errors and make it compilable. Test Plan: Build and notice no errors. ```lang=bash % USE_CLANG=1 make check -j55 ``` Tests are still testing. Reviewers: meyering, sdong, rven, igor Reviewed By: igor Subscribers: dhruba, leveldb Differential Revision: https://reviews.facebook.net/D35157
2015-03-17 22:08:00 +01:00
return RUN_ALL_TESTS();
}
2014-05-09 17:34:18 +02:00
#endif // GFLAGS