Summary: There was an artifical limit on the size of the write buffer size.
Test Plan: make check
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10911
Summary:
The valgrind errors were in the unit tests where we change the
number of levels of a database using internal methods.
Test Plan:
valgrind ./reduce_levels_test
valgrind ./db_test
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10893
Summary: Make Statistics usable by client
Test Plan: make check; db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10899
Summary:
Currently, with paranoid_check on, DB::Open will fail on any log read error on recovery.
If client is ok with losing most recent updates, we could simply skip those errors.
However, it's important to introduce an additional flag, so that paranoid_check can
still guard against more serious problems.
Test Plan: make check; db_stress
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb, emayanke
Differential Revision: https://reviews.facebook.net/D10869
Summary:
There is an existing field Options.max_bytes_for_level_multiplier that
sets the multiplier for the size of each level in the database.
This patch introduces the ability to set different multipliers
for every level in the database. The size of a level is determined
by using both max_bytes_for_level_multiplier as well as the
per-level fanout.
size of level[i] = size of level[i-1] * max_bytes_for_level_multiplier
* fanout[i-1]
The default value of fanout is 1, so that it is backward compatible.
Test Plan: make check
Reviewers: haobo, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10863
Summary:
The merge operator diff introduced a performance problem in MemTable::Get.
An exit condition is missed when the current key does not match the user key.
This could lead to full memtable scan if the user key is not found.
Test Plan: make check; db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10851
Summary:
Make stop watch a simple implementation, instead of subclass of a virtual class
Allocate stop watches off the stack instead of heap.
Code is more terse now.
Test Plan: make all check, db_bench with --statistics=1
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10809
Summary: Statistics.h and histogram.h had double based api's to record values. Remove them as they are not used anywhere
Test Plan: make all check
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10815
Summary:
This diff replaces compaction_filter_args and CompactionFilter with a single compaction_filter parameter. It gives CompactionFilter better encapsulation and a similar look to Comparator and MergeOpertor, which improves consistency of the overall interface.
The change is not backward compatible. Nevertheless, the two references in fbcode are not in production yet.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10773
Summary:
Currently, compaction filter is run on internal key older than the oldest snapshot, which is incorrect.
Compaction filter should really be run on the most recent internal key when there is no external snapshot.
Test Plan: make check; db_stress
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D10641
Summary:
For level-0 compactions, we try to find if can include more L0 files
in the same compaction run. This causes the 'smallest' and 'largest'
key to get extended to a larger range. But the suceeding call to
ParentRangeInCompaction() was still using the earlier
values of 'smallest' and 'largest',
Because of this bug, a file in L1 can be part of two concurrent
compactions: one L0-L1 compaction and the other L1-L2 compaction.
This should not cause any data loss, but will cause an assertion
failure with debug builds.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D10677
Summary:
WAL files are moved to archive directory and clear only at DB::Open.
Can lead to a lot of space consumption in a Database. Added logic to periodically clear Archive Directory too.
Test Plan: make all check + add unit test
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10617
Summary:
This diff introduces a new Merge operation into rocksdb.
The purpose of this review is mostly getting feedback from the team (everyone please) on the design.
Please focus on the four files under include/leveldb/, as they spell the client visible interface change.
include/leveldb/db.h
include/leveldb/merge_operator.h
include/leveldb/options.h
include/leveldb/write_batch.h
Please go over local/my_test.cc carefully, as it is a concerete use case.
Please also review the impelmentation files to see if the straw man implementation makes sense.
Note that, the diff does pass all make check and truly supports forward iterator over db and a version
of Get that's based on iterator.
Future work:
- Integration with compaction
- A raw Get implementation
I am working on a wiki that explains the design and implementation choices, but coding comes
just naturally and I think it might be a good idea to share the code earlier. The code is
heavily commented.
Test Plan: run all local tests
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9651
Summary:
The current code has a bug that take address of stack allocated LogReporter.
It is causing SIGSEGV because the stack address is no longer valid when referenced.
Test Plan: Tested on prod.
Reviewers: haobo, dhruba, heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D10557
Summary: $title
Test Plan: make db_bench . run db_bench and check for expected output
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10521
Summary:
- don't see a point exposing table.h to the public.
- fixed make clean to remove also *.d files.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10479
Summary: D8943 Broke read_missing. Fix it by adding a "." at the end of the generated key
Test Plan: generate, print and check the key has a "."
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10455
Summary:
- removed the compaction_filter_value from the callback interface. Restrict compaction filter to purging values.
- modify some comments to reflect curent status.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10335
Summary:
Adds the --writes_per_second rate limit for the readwhilewriting test.
The purpose is to optionally avoid saturating storage with writes & compaction
and test read response time when some writes are being done.
Changes the histogram code to also print the p99.99 value
Task ID: #
Blame Rev:
Test Plan:
make check, ran db_bench with it
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10305
Summary:
This diff provides the ability to print out a stacktrace when the process receives certain signals.
Currently, we enable this for the following signals (program error related):
SIGILL SIGSEGV SIGBUS SIGABRT
Application simply #include "util/stack_trace.h" and call leveldb::InstallStackTraceHandler() during initialization, if signal handler is needed. It's not done automatically when openning db, because it's the application(process)'s responsibility to install signal handler and some applications might already have their own (like fbcode).
Sample output:
Received signal 11 (Segmentation fault)
#0 0x408ff0 ./signal_test() [0x408ff0] /home/haobo/rocksdb/util/signal_test.cc:4
#1 0x40827d ./signal_test() [0x40827d] /home/haobo/rocksdb/util/signal_test.cc:24
#2 0x7f8bb183172e /usr/local/fbcode/gcc-4.7.1-glibc-2.14.1/lib/libc.so.6(__libc_start_main+0x10e) [0x7f8bb183172e] ??:0
#3 0x408ebc ./signal_test() [0x408ebc] /home/engshare/third-party/src/glibc/glibc-2.14.1/glibc-2.14.1/csu/../sysdeps/x86_64/elf/start.S:113
Segmentation fault (core dumped)
For each frame, we print the raw pointer, the symbol provided by backtrace_symbols (still not good enough), and the source file/line. Note that address translation is done by directly shell out to addr2line. ??:0 means addr2line fails to do the translation. Hacky, but I think it's good for now.
Test Plan: signal_test.cc
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10173
Summary: A better error message. A local change. Did not look at other places where this could be done.
Test Plan: compile
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10251
Summary: Simplified level_ptrs by using a std:vector
Test Plan: make check
Reviewers: sheki, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10245
Summary:
FindObsoleteFiles was slow, holding the single big lock, resulted in bad p99 behavior.
Didn't profile anything, but several things could be improved:
1. VersionSet::AddLiveFiles works with std::set, which is by itself slow (a tree).
You also don't know how many dynamic allocations occur just for building up this tree.
switched to std::vector, also added logic to pre-calculate total size and do just one allocation
2. Don't see why env_->GetChildren() needs to be mutex proteced, moved to PurgeObsoleteFiles where
mutex could be unlocked.
3. switched std::set to std:unordered_set, the conversion from vector is also inside PurgeObsoleteFiles
I have a feeling this should pretty much fix it.
Test Plan: make check; db_stress
Reviewers: dhruba, heyongqiang, MarkCallaghan
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D10197
Summary: using unique_ptr to have automatic delete for probableWALfiles in db_impl.cc
Test Plan: make
Reviewers: sheki, dhruba
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10083
Summary:
The segfault was happening because the program was unable to open a new
sst file (as part of the compaction) because the process ran out of
file descriptors.
The fix is to check the return status of the file creation before taking
any other action.
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fabf03f9700 (LWP 29904)]
leveldb::DBImpl::OpenCompactionOutputFile (this=this@entry=0x7fabf9011400, compact=compact@entry=0x7fabf741a2b0) at db/db_impl.cc:1399
1399 db/db_impl.cc: No such file or directory.
(gdb) where
Test Plan: make check
Reviewers: MarkCallaghan, sheki
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D10101
Summary:
Transaction Log Iterator did not move to the next file in the series if there was a write batch at the end of the currentFile.
The solution is if the last seq no. of the current file is < RequestedSeqNo. Assume the first seqNo. of the next file has to satisfy the request.
Also major refactoring around the code. Moved opening the logreader to a seperate function, got rid of goto.
Test Plan: added a unit test for it.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb, emayanke
Differential Revision: https://reviews.facebook.net/D10029
Summary:
TableAndFile was a struct used earlier to delete the file as we did not have std::unique_ptr in the codebase.
With Chip introducing C++11 hotness like std::unique_ptr we can do away with the struct.
Test Plan: make all check
Reviewers: haobo, heyongqiang
Reviewed By: heyongqiang
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D9975
Summary:
During recovery, last_updated_manifest number was not set if there were no records in the Write-ahead log.
Now check for the recovered manifest also and set last_updated_manifest file to the max value.
Test Plan: unit test
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9891
Summary:
If a class owns an object:
- If the object can be null => use a unique_ptr. no delete
- If the object can not be null => don't even need new, let alone delete
- for runtime sized array => use vector, no delete.
Test Plan: make check
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb, zshao, sheki, emayanke, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D9783
Summary:
RocksDB does a binary search to look at the files which might contain the requested sequence number at the call GetUpdatesSince.
There was a bug in the binary search => when the file pointed by the middle index of bsearch was empty/corrupt it needst to resize the vector and update indexes.
This now fixes that.
Test Plan: existing unit tests pass.
Reviewers: heyongqiang, dhruba
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9777
Summary:
If the vector returned by GetUpdatesSince is empty, it is still returned to the
user. This causes it throw an std::range error.
The probable file list is checked and it returns an IOError status instead of OK now.
Test Plan: added a unit test.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9771
Summary:
Use non mmapd files for Write-Ahead log.
Earlier use of MMaped files. made the log iterator read ahead and miss records.
Now the reader and writer will point to the same physical location.
There is no perf regression :
./db_bench --benchmarks=fillseq --db=/dev/shm/mmap_test --num=$(million 20) --use_existing_db=0 --threads=2
with This diff :
fillseq : 10.756 micros/op 185281 ops/sec; 20.5 MB/s
without this dif :
fillseq : 11.085 micros/op 179676 ops/sec; 19.9 MB/s
Test Plan: unit test included
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9741
Summary:
Earlier Statistics object was a raw pointer. This meant the user had to clear up
the Statistics object after creating the database. In most use cases the database is created in a function and the statistics pointer is out of scope. Hence the statistics object would never be deleted.
Now Using a shared_ptr to manage this.
Want this in before the next release.
Test Plan: make all check.
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9735
Summary: rocksdb uses a single global lock to protect in memory metadata. We should minimize the mutex protected code section to increase the effective parallelism of the program. See https://our.intern.facebook.com/intern/tasks/?t=2218928
Test Plan:
make check
db_bench
Reviewers: dhruba, heyongqiang
CC: zshao, leveldb
Differential Revision: https://reviews.facebook.net/D9705
Summary:
The unit test fails as our solution does not work with MMap'd files.
Disable the failing unit test. Put it back with the next diff which should fix the problem.
Test Plan: db_test
Reviewers: heyongqiang
CC: dhruba
Differential Revision: https://reviews.facebook.net/D9645
Summary:
* Add a method to check if the log reader is at EOF.
* If we know a record has been flushed force the log_reader to believe it is not at EOF, using a new method UnMarkEof().
This does not work with MMpaed files.
Test Plan: added a unit test.
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9567
Summary:
The events that trigger compaction:
* opening the database
* Get -> only if seek compaction is not disabled and other checks are true
* MakeRoomForWrite -> when memtable is full
* BackgroundCall ->
If the background thread is about to do a compaction run, it schedules
a new background task to trigger a possible compaction. This will cause
additional background threads to find and process other compactions that
can run concurrently.
Test Plan: ran db_bench with overwrite and readonly alternatively.
Reviewers: sheki, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9579
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Summary: Some comparisons left in log_test.cc and db_test.cc complained by make
Test Plan: make
Reviewers: dhruba, sheki
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9537
Summary: Makefile had options to ignore sign-comparisons and unused-parameters, which should be there. Also fixed the specific errors in the code-base
Test Plan: make
Reviewers: chip, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9531
Summary:
Add --benchmarks=levelstats option to report per-level stats (#files, #bytes)
Change readwhilewriting test to report response time for writes but exclude
them from the stats merged by all threads.
Prevent "NaN" in stats output by preventing division by 0.
Remove "o" file I committed by mistake.
Task ID: #
Blame Rev:
Test Plan:
make check
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9513
Summary:
Rocksdb can create 0 sized log files when it is opened and closed without any operations.
The GetUpdatesSince fails currently if there is a log file of size zero.
This diff fixes this. If there is a log file is 0, it is removed form the probable_file_list
Test Plan: unit test
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9507
Summary:
Instead of checking for number of files in L0. Check for number of files in the requested level.
Bug introduced in D4929 (diff trying to do too many things).
Test Plan: db_test.
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9483
Summary:
Add --benchmarks=updaterandom for read-modify-write workloads. This is different
from --benchmarks=readrandomwriterandom in a few ways. First, an "operation" is the
combined time to do the read & write rather than treating them as two ops. Second,
the same key is used for the read & write.
Change RandomGenerator to support rows larger than 1M. That was using "assert"
to fail and assert is compiled-away when -DNDEBUG is used.
Add more options to db_bench
--duration - sets the number of seconds for tests to run. When not set the
operation count continues to be the limit. This is used by random operation
tests.
--use_snapshot - when set GetSnapshot() is called prior to each random read.
This is to measure the overhead from using snapshots.
--get_approx - when set GetApproximateSizes() is called prior to each random
read. This is to measure the overhead for a query optimizer.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9267
Summary: Fix for memory leaks in rocksdb tests. Also modified the variable NUM_FAILED_TESTS to print the actual number of failed tests.
Test Plan: make <test>; valgrind --leak-check=full ./<test>
Reviewers: sheki, dhruba
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9333
Summary:
SizeBeingCompacted was called without any lock protection. This causes
crashes, especially when running db_bench with value_size=128K.
The fix is to compute SizeUnderCompaction while holding the mutex and
passing in these values into the call to Finalize.
(gdb) where
#4 leveldb::VersionSet::SizeBeingCompacted (this=this@entry=0x7f0b490931c0, level=level@entry=4) at db/version_set.cc:1827
#5 0x000000000043a3c8 in leveldb::VersionSet::Finalize (this=this@entry=0x7f0b490931c0, v=v@entry=0x7f0b3b86b480) at db/version_set.cc:1420
#6 0x00000000004418d1 in leveldb::VersionSet::LogAndApply (this=0x7f0b490931c0, edit=0x7f0b3dc8c200, mu=0x7f0b490835b0, new_descriptor_log=<optimized out>) at db/version_set.cc:1016
#7 0x00000000004222b2 in leveldb::DBImpl::InstallCompactionResults (this=this@entry=0x7f0b49083400, compact=compact@entry=0x7f0b2b8330f0) at db/db_impl.cc:1473
#8 0x0000000000426027 in leveldb::DBImpl::DoCompactionWork (this=this@entry=0x7f0b49083400, compact=compact@entry=0x7f0b2b8330f0) at db/db_impl.cc:1757
#9 0x0000000000426690 in leveldb::DBImpl::BackgroundCompaction (this=this@entry=0x7f0b49083400, madeProgress=madeProgress@entry=0x7f0b41bf2d1e, deletion_state=...) at db/db_impl.cc:1268
#10 0x0000000000428f42 in leveldb::DBImpl::BackgroundCall (this=0x7f0b49083400) at db/db_impl.cc:1170
#11 0x000000000045348e in BGThread (this=0x7f0b49023100) at util/env_posix.cc:941
#12 leveldb::(anonymous namespace)::PosixEnv::BGThreadWrapper (arg=0x7f0b49023100) at util/env_posix.cc:874
#13 0x00007f0b4a7cf10d in start_thread (arg=0x7f0b41bf3700) at pthread_create.c:301
#14 0x00007f0b49b4b11d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
Test Plan:
make check
I am running db_bench with a value size of 128K to see if the segfault is fixed.
Reviewers: MarkCallaghan, sheki, emayanke
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9279
Summary:
If there is an error while writing an edit to the manifest file, the manifest
file is closed and reopened to check if the edit made it in. However, if the
re-opening of the manifest is unsuccessful and options.paranoid_checks is set
t true, then the db refuses to accept new puts, effectively putting the db
in readonly mode.
In a future diff, I would like to make the default value of paranoid_check
to true.
Test Plan: make check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9201
Summary:
Store the last flushed, seq no. in db_impl. Check against it in
transaction Log iterator. Do not attempt to read ahead if we do not know
if the data is flushed completely.
Does not work if flush is disabled. Any ideas on fixing that?
* Minor change, iter->Next is called the first time automatically for
* the first time.
Test Plan:
existing test pass.
More ideas on testing this?
Planning to run some stress test.
Reviewers: dhruba, heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9087
Summary:
The compaction process zeros out sequence numbers if the output is
part of the bottommost level.
The Slice is supposed to refer to an immutable data buffer. The
merger that implements the priority queue while reading kvs as
the input of a compaction run reies on this fact. The bug was that
were updating the sequence number of a record in-place and that was
causing suceeding invocations of the merger to return kvs in
arbitrary order of sequence numbers.
The fix is to copy the key to a local memory buffer before setting
its seqno to 0.
Test Plan:
Set Options.purge_redundant_kvs_while_flush = false and then run
db_stress --ops_per_thread=1000 --max_key=320
Reviewers: emayanke, sheki
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9147
Summary:
TableCache->file is not used. remove it.
I kept the TableAndFile structure and will clean it up in a future patch.
Test Plan: make clean check
Reviewers: sheki, chip
Reviewed By: chip
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9075
Summary:
This adds the rate_delay_limit_milliseconds option to make the delay
configurable in MakeRoomForWrite when the max compaction score is too high.
This delay is called the Ln slowdown. This change also counts the Ln slowdown
per level to make it possible to see where the stalls occur.
From IO-bound performance testing, the Level N stalls occur:
* with compression -> at the largest uncompressed level. This makes sense
because compaction for compressed levels is much
slower. When Lx is uncompressed and Lx+1 is compressed
then files pile up at Lx because the (Lx,Lx+1)->Lx+1
compaction process is the first to be slowed by
compression.
* without compression -> at level 1
Task ID: #1832108
Blame Rev:
Test Plan:
run with real data, added test
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D9045
Summary:
Rocks accumulates recent writes and deletes in the in-memory memtable.
When the memtable is full, it writes the contents on the memtable to
a file in L0.
This patch removes redundant records at the time of the flush. If there
are multiple versions of the same key in the memtable, then only the
most recent one is dumped into the output file. The purging of
redundant records occur only if the most recent snapshot is earlier
than the earliest record in the memtable.
Should we switch on this feature by default or should we keep this feature
turned off in the default settings?
Test Plan: Added test case to db_test.cc
Reviewers: sheki, vamsi, emayanke, heyongqiang
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8991
Summary:
1. the default value for key size is still 16
2. enable the ability to set the key size via command line --key_size=
Test Plan:
build & run db_banch and pass some value via command line.
verify it works correctly.
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8943
Summary:
There was an artifical limit of 50K files per database. This is
insifficient if the database is 1 TB in size and each file is 2 MB.
Test Plan: make check
Reviewers: sheki, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8919
Summary:
Use only the counter mechanism. Do away with
incNumFileOpens, incNumFileClose, incNumFileErrors
s/NULL/nullptr/g in db/table_cache.cc
Test Plan: make clean check
Reviewers: dhruba, heyongqiang, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8841
Summary: just record time consumed in compaction
Test Plan: compile
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8781
Summary:
* Counters for bytes read and write.
as a part of this diff, I want to=>
* Measure compaction times. @dhruba can you point which function, should
* I time to get Compaction-times. Was looking at CompactRange.
Test Plan: db_test
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8763
Summary:
Changed the Get and Scan options with openForReadOnly mode to have access to the memtable.
Changed the visibility of NewInternalIterator in db_impl from private to protected so that
the derived class db_impl_read_only can call that in its NewIterator function for the
scan case. The previous approach which changed the default for flush_on_destroy_ from false to true
caused many problems in the unit tests due to empty sst files that it created. All
unit tests pass now.
Test Plan: make clean; make all check; ldb put and get and scans
Reviewers: dhruba, heyongqiang, sheki
Reviewed By: dhruba
CC: kosievdmerwe, zshao, dilipj, kailiu
Differential Revision: https://reviews.facebook.net/D8697
Summary:
* Introduce is histogram in statistics.h
* stop watch to measure time.
* introduce two timers as a poc.
Replaced NULL with nullptr to fight some lint errors
Should be useful for google.
Test Plan:
ran db_bench and check stats.
make all check
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8637
Summary:
c_test: db/filename.cc:74: std::string leveldb::DescriptorFileName(const string&,....
Test Plan:
this is a failure in a unit test
Differential Revision: https://reviews.facebook.net/D8667
Summary:
The sequence numbers in each record eat up plenty of space on storage.
The optimization zeroes out sequence numbers on kvs in the Lmax
layer that are earlier than the earliest snapshot.
Test Plan: Unit test attached.
Differential Revision: https://reviews.facebook.net/D8619
Summary:
flush_on_destroy has a default value of false and the memtable is flushed
in the dbimpl-destructor only when that is set to true. Because we want the memtable to be flushed everytime that
the destructor is called(db is closed) and the cases where we work with the memtable only are very less
it is a good idea to give this a default value of true. Thus the put from ldb
wil have its data flushed to disk in the destructor and the next Get will be able to
read it when opened with OpenForReadOnly. The reason that ldb could read the latest value when
the db was opened in the normal Open mode is that the Get from normal Open first reads
the memtable and directly finds the latest value written there and the Get from OpenForReadOnly
doesn't have access to the memtable (which is correct because all its Put/Modify) are disabled
Test Plan: make all; ldb put and get and scans
Reviewers: dhruba, heyongqiang, sheki
Reviewed By: heyongqiang
CC: kosievdmerwe, zshao, dilipj, kailiu
Differential Revision: https://reviews.facebook.net/D8631
Summary:
* Add a SplitByTTLLogger to enable this feature. In this diff I implemented generalized AutoSplitLoggerBase class to simplify the
development of such classes.
* Refactor the existing AutoSplitLogger and fix several bugs.
Test Plan:
* Added a unit tests for different types of "auto splitable" loggers individually.
* Tested the composited logger which allows the log files to be splitted by both TTL and log size.
Reviewers: heyongqiang, dhruba
Reviewed By: heyongqiang
CC: zshao, leveldb
Differential Revision: https://reviews.facebook.net/D8037
Summary:
Previously, if you opened a db with num_levels set lower than
the database, you received the unhelpful message "Corruption:
VersionEdit: new-file entry." Now you get a more verbose message
describing the issue.
Also, fix handling of compression_levels (both the run-over-the-end
issue and the memory management of it).
Lastly, unique_ptr'ify a couple of minor calls.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8151
Summary:
We continually rebuilt build_version.c because we put the
current date into it, but that's what __DATE__ already is. This makes
builds faster.
This also fixes an issue with 'make clean FOO' not working properly.
Also tweak the build rules to be more consistent, always have warnings,
and add a 'make release' rule to handle flags for release builds.
Test Plan: make, make clean
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D8139
Summary:
On some filesystems, pre-allocation can be a considerable
amount of space. xfs in our production environment pre-allocates by
1GB, for instance. By using fallocate to inform the kernel of our
expected file sizes, we eliminate this wasteage (that isn't recovered
until the file is closed which, in the case of LOG files, can be a
considerable amount of time).
Test Plan:
created an xfs loopback filesystem, mounted with
allocsize=4M, and ran db_stress. LOG file without this change was 4M,
and with it it was 128k then grew to normal size.
Reviewers: dhruba
Reviewed By: dhruba
CC: adsharma, leveldb
Differential Revision: https://reviews.facebook.net/D7953
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
Summary:
Found issues with `db_test` and `db_stress` when running valgrind.
`DBImpl` had an issue where if an compaction failed then it will use the uninitialised file size of an output file is used. This manifested as the final call to output to the log in `DoCompactionWork()` branching on uninitialized memory (all the way down in printf's innards).
Test Plan:
Ran `valgrind --track_origins=yes ./db_test` and `valgrind ./db_stress` to see if issues disappeared.
Ran `make check` to see if there were no regressions.
Reviewers: vamsi, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8001
Summary:
Check in LogAndApply if the file size is more than the limit set in
Options.
Things to consider : will this be expensive?
Test Plan: make all check. Inputs on a new unit test?
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7701
Summary:
clang is an alternate compiler based on llvm. It produces
nicer error messages and finds some bugs that gcc doesn't, such as the
size_t change in this file (which caused some write return values to be
misinterpreted!)
Clang isn't the default; to try it, do "USE_CLANG=1 make" or "export
USE_CLANG=1" then make as normal
Test Plan: "make check" and "USE_CLANG=1 make check"
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7899
Summary: Mis-merged from HEAD, had a duplicate declaration.
Test Plan: make -j32 OPT=-g
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7911
Summary: Due to how the code handled compactions in Level 0 in `PickCompaction()` it could be the case that two compactions on level 0 ran that produced tables in level 1 that overlap. However, this case seems like it would only occur on a seek compaction which is unlikely on level 0. Furthermore, level 0 and level 1 had to have a certain arrangement of files.
Test Plan:
make check
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb, sheki
Differential Revision: https://reviews.facebook.net/D7923
Summary:
Specific changes:
1) Turn on -Werror so all warnings are errors
2) Fix some warnings the above now complains about
3) Add proper dependency support so changing a .h file forces a .c file
to rebuild
4) Automatically use fbcode gcc on any internal machine rather than
whatever system compiler is laying around
5) Fix jemalloc to once again be used in the builds (seemed like it
wasn't being?)
6) Fix issue where 'git' would fail in build_detect_version because of
LD_LIBRARY_PATH being set in the third-party build system
Test Plan:
make, make check, make clean, touch a header file, make sure
rebuild is expected
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7887
Summary:
Pretty much a blind copy of the patch in open source.
Hope to get this in before we make a release
Test Plan: make clean check
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7809
Summary: Found some issues running Valgrind on `db_test` (there are still some outstanding ones) and fixed them.
Test Plan:
make check
ran `valgrind ./db_test` and saw that errors no longer occur
Reviewers: dhruba, vamsi, emayanke, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7803
Summary:
This was a peformance regression caused by https://reviews.facebook.net/D6729.
The default value of max_grandparent_overlap_factor was erroneously
set to 0 in db_bench.
This was causing compactions to create really really small files because the max_grandparent_overlap_factor was erroneously set to zero in the benchmark.
Test Plan: Run --benchmarks=overwrite
Reviewers: heyongqiang, emayanke, sheki, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7797
Summary:
Changed CreateDir() to CreateDirIfMissing() so a directory that already exists now causes and error.
Fixed CreateDirIfMissing() and added Env.DirExists()
Test Plan:
make check to test for regessions
Ran the following to test if the error message is not about lock files not existing
./db_bench --db=dir/testdb
After creating a file "testdb", ran the following to see if it failed with sane error message:
./db_bench --db=testdb
Reviewers: dhruba, emayanke, vamsi, sheki
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7707
Summary:
Adds the option --seed to db_bench to specify the base for the per-thread RNG.
When not set each thread uses the same value across runs of db_bench which defeats
IO stress testing.
Adds the option --read_range. When set to a value > 1 an iterator is created and
each query done for the randomread benchmark will do a range scan for that many
rows. When not set or set to 1 the existing behavior (a point lookup) is done.
Fixes a bug where a printf format string was missing.
Test Plan: run db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7749
Summary:
`MemTableList::Add()` neglected to mention that it took ownership of the reference held by its caller.
The comment in `MemTable::Get()` was wrong in describing the format of the key.
Test Plan: None
Reviewers: dhruba, sheki, emayanke, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7755
Summary:
There was a bug in the ExtendOverlappingInputs method so that
the terminating condition for the backward search was incorrect.
Test Plan: make clean check
Reviewers: sheki, emayanke, MarkCallaghan
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7725
Summary:
Leveldb has an api OpenForReadOnly() that opens the database
in readonly mode. This call had an option to not process the
transaction log. This patch removes this option and always
processes all transactions that had been committed. It has
been done in such a way that it does not create/write to
any new files in the process. The invariant of "no-writes"
to the leveldb data directory is still true.
This enhancement allows multiple threads to open the same database
in readonly mode and access all trancations that were committed right
upto the OpenForReadOnly call.
I changed the public API to match the new semantics because
there are no users who are currently using this api.
Test Plan: make clean check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7479
Summary:
1. The OpenForReadOnly() call should not lock the db. This is useful
so that multiple processes can open the same database concurrently
for reading.
2. GetUpdatesSince should not error out if the archive directory
does not exist.
3. A new constructor for WriteBatch that can takes a serialized
string as a parameter of the constructor.
Test Plan: make clean check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7449
Summary:
Added kMetaDatabase for meta-databases in db/filename.h along with supporting
fuctions.
Fixed switch in DBImpl so that it also handles kMetaDatabase.
Fixed DestroyDB() that it can handle destroying meta-databases.
Test Plan: make check
Reviewers: sheki, emayanke, vamsi, dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7245
Summary:
C tests would fail sometimes as DestroyDB would return a Failure Status
message when deleting an archival directory which was not created
(WAL_ttl_seconds = 0).
Fix: Ignore the Status returned on Deleting Archival Directory.
Test Plan: * make check
Reviewers: dhruba, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7395
Summary:
WriteBatch is now used by the GetUpdatesSinceAPI. This API is external
and will be used by the rocks server. Rocks Server and others will need
to know about the Sequence Number in the WriteBatch. This public method
will allow for that.
Test Plan: make all check.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7293
Summary:
* Fixed implementation bug in Binary_Searvch introduced in https://reviews.facebook.net/D7119
* Binary search is also overflow safe.
* Delete archive log files and archive dir during DestroyDB
Test Plan: make check
Reviewers: dhruba
CC: kosievdmerwe, emayanke
Differential Revision: https://reviews.facebook.net/D7263
Summary:
Implement a interface to retrieve the most current transaction
id from the database.
Test Plan: Added unit test.
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7269
Summary:
filename.h has functions to do similar things.
Moving code away from db_impl.cc
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7251
Summary:
How it works:
* GetUpdatesSince takes a SequenceNumber.
* A LogFile with the first SequenceNumber nearest and lesser than the requested Sequence Number is found.
* Seek in the logFile till the requested SeqNumber is found.
* Return an iterator which contains logic to return record's one by one.
Test Plan:
* Test case included to check the good code path.
* Will update with more test-cases.
* Feedback required on test-cases.
Reviewers: dhruba, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7119
Summary:
A compaction is picked based on its score. It is useful to
print the compaction score in the LOG because it aids in
debugging. If one looks at the logs, one can find out why
a compaction was preferred over another.
Test Plan: make clean check
Differential Revision: https://reviews.facebook.net/D7137
Summary:
Create a directory "archive" in the DB directory.
During DeleteObsolteFiles move the WAL files (*.log) to the Archive directory,
instead of deleting.
Test Plan: Created a DB using DB_Bench. Reopened it. Checked if files move.
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6975
Summary:
Scripted and removed all trailing spaces and converted all tabs to
spaces.
Also fixed other lint errors.
All lint errors from this point of time should be taken seriously.
Test Plan: make all check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7059
Summary:
LevelDB should delete almost-new keys when a long-open snapshot exists.
The previous behavior is to keep all versions that were created after the
oldest open snapshot. This can lead to database size bloat for
high-update workloads when there are long-open snapshots and long-open
snapshot will be used for logical backup. By "almost new" I mean that the
key was updated more than once after the oldest snapshot.
If there were two snapshots with seq numbers s1 and s2 (s1 < s2), and if
we find two instances of the same key k1 that lie entirely within s1 and
s2 (i.e. s1 < k1 < s2), then the earlier version
of k1 can be safely deleted because that version is not visible in any snapshot.
Test Plan:
unit test attached
make clean check
Differential Revision: https://reviews.facebook.net/D6999
Summary:
Print out status at the end of a compaction run. This helps in
debugging.
Test Plan: make clean check
Reviewers: sheki
Reviewed By: sheki
Differential Revision: https://reviews.facebook.net/D7035
Summary:
When we expand the range of keys for a level 0 compaction, we
need to invoke ParentFilesInCompaction() only once for the
entire range of keys that is being compacted. We were invoking
it for each file that was being compacted, but this triggers
an assertion because each file's range were contiguous but
non-overlapping.
I renamed ParentFilesInCompaction to ParentRangeInCompaction
to adequately represent that it is the range-of-keys and
not individual files that we compact in a single compaction run.
Here is the assertion that is fixed by this patch.
db_test: db/version_set.cc:585: void leveldb::Version::ExtendOverlappingInputs(int, const leveldb::Slice&, const leveldb::Slice&, std::vector<leveldb::FileMetaData*, std::allocator<leveldb::FileMetaData*> >*, int): Assertion `user_cmp->Compare(flimit, user_begin) >= 0' failed.
Test Plan: make clean check OPT=-g
Reviewers: sheki
Reviewed By: sheki
CC: MarkCallaghan, emayanke, leveldb
Differential Revision: https://reviews.facebook.net/D6963
Summary:
On fast filesystems (e.g. /dev/shm and ext4), the flushing
of memstore to disk was fast and quick, and the background compaction
thread was not getting scheduled fast enough to delete obsolete
files before the db was closed. This caused the repair method
to pick up those files that were not part of the db and the unit
test was failing.
The fix is to enhance the unti test to run a compaction before
closing the database so that all files that are not part of the
database are truly deleted from the filesystem.
Test Plan: make c_test; ./c_test
Reviewers: chip, emayanke, sheki
Reviewed By: chip
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6915
Summary:
The compaction process takes some files from LevelK and
merges it into LevelK+1. The number of files it picks from
LevelK was capped such a way that the total amount of
data picked does not exceed the maxfilesize of that level.
This essentially meant that only one file from LevelK
is picked for a single compaction.
For bulkloads, we would like to take many many file from
LevelK and compact them using a single compaction run.
This patch introduces a option called the 'source_compaction_factor'
(similar to expanded_compaction_factor). It is a multiplier
that is multiplied by the maxfilesize of that level to arrive
at the limit that is used to throttle the number of source
files from LevelK. For bulk loads, set source_compaction_factor
to a very high number so that multiple files from the same
level are picked for compaction in a single compaction.
The default value of source_compaction_factor is 1, so that
we can keep backward compatibilty with existing compaction semantics.
Test Plan: make clean check
Reviewers: emayanke, sheki
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6867
Summary:
This option is needed for fast bulk uploads. The goal is to load
all the data into files in L0 without any interference from
background compactions.
Test Plan: make clean check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6849
Summary:
The method Finalize() recomputes the compaction score of each
level and then sorts these score from largest to smallest. The
idea is that the level with the largest compaction score will
be a better candidate for compaction. There are usually very
few levels, and a bubble sort code was used to sort these
compaction scores. There existed a bug in the sorting code that
skipped looking at the score for the n-1 level. This meant that
even if the compaction score of the n-1 level is large, it will
not be picked for compaction.
This patch fixes the bug and also introduces "asserts" in the
code to detect any possible inconsistencies caused by future bugs.
This bug existed in the very first code change that introduced
multi-threaded compaction to the leveldb code. That version of
code was committed on Oct 19th via
1ca0584345
Test Plan: make clean check OPT=-g
Reviewers: emayanke, sheki, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6837
Summary:
The manifest file contains a series of edits. If the verbose
option is switched on, then print each individual edit in the
manifest file. This helps in debugging.
Test Plan: make clean manifest_dump
Reviewers: emayanke, sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6807
Summary: The new function MinLevelToCompress in db_test.cc was incomplete. It needs to tell the calling function-TEST whether the test has to be skipped or not
Test Plan: make all;./db_test
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: sheki
Differential Revision: https://reviews.facebook.net/D6771
Summary:
The manifest file contains a series of edits. If the verbose
option is switched on, then print each individual edit in the
manifest file. This helps in debugging.
Test Plan: make clean manifest_dump
Reviewers: emayanke, sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6807
Summary:
dbstress has an option to reopen the database. Make it such that the
previous handle is not closed before we reopen, this simulates a
situation similar to a process crash.
Added new api to DMImpl to remove the lock file.
Test Plan: run db_stress
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6777
Summary: The new function MinLevelToCompress in db_test.cc was incomplete. It needs to tell the calling function-TEST whether the test has to be skipped or not
Test Plan: make all;./db_test
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: sheki
Differential Revision: https://reviews.facebook.net/D6771
Summary:
The value specified in max_grandparent_overlap_factor is used to
limit the file size in a compaction run. This patch makes it
configurable when using db_bench.
Test Plan: make clean db_bench
Reviewers: MarkCallaghan, heyongqiang
Reviewed By: heyongqiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D6729
Summary:
There are applications that operate on multiple leveldb instances.
These applications will like to pass in an opaque type for each
leveldb instance and this type should be passed back to the application
with every invocation of the CompactionFilter api.
Test Plan: Enehanced unit test for opaque parameter to CompactionFilter.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan, sheki, emayanke
Differential Revision: https://reviews.facebook.net/D6711
Summary:
Compilation used to fail with the error:
db/version_set.cc:1773: error: ‘number_of_files_to_sort_’ is not a member of ‘leveldb::VersionSet’
I created a new method called CheckConsistencyForDeletes() so that
all the high cost checking is done only when OPT=-g is specified.
I also fixed a bug in PickCompactionBySize that was triggered when
OPT=-g was switched on. The base_index in the compaction record
was not set correctly.
Test Plan: make check OPT=-g
Differential Revision: https://reviews.facebook.net/D6687
Summary:
The db_bench utility was broken in 1.5.4.fb because of a
signed-unsigned comparision.
The static variable FLAGS_min_level_to_compress was recently
changed from int to 'unsigned in' but it is initilized to a
nagative value -1.
The segfault is of this type:
Program received signal SIGSEGV, Segmentation fault.
Open (this=0x7fffffffdee0) at db/db_bench.cc:939
939 db/db_bench.cc: No such file or directory.
(gdb) where
Test Plan: run db_bench with no options.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan, emayanke, sheki
Differential Revision: https://reviews.facebook.net/D6663
Summary:
make clean check OPT=-g fails
leveldb::DBStatistics::getTickerCount(leveldb::Tickers)’:
./db/db_statistics.h:34: error: ‘MAX_NO_TICKERS’ was not declared in this scope
util/ldb_cmd.cc:255: warning: left shift count >= width of type
Test Plan:
make clean check OPT=-g
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary: Record BloomFliter hits and drop off reasons during compaction.
Test Plan: Unit tests work.
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6591
Summary:
disable size compaction in ldb reduce_levels, this will avoid compactions rather than the manual comapction,
added --compression=none|snappy|zlib|bzip2 and --file_size= per-file size to ldb reduce_levels command
Test Plan: run ldb
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: sheki, emayanke
Differential Revision: https://reviews.facebook.net/D6597
Summary:
Prototype stat's collection. Diff is a good estimate of what
the final code will look like.
A few assumptions :
* Used a global static instance of the statistics object. Plan to pass
it to each internal function. Static allows metrics only at app
level.
* In the Ticker's do not do any locking. Depend on the mutex at each
function of LevelDB. If we ever remove the mutex, we should change
here too. The other option is use atomic objects anyways as there
won't be any contention as they will be always acquired only by one
thread.
* The counters are dumb, increment through lifecycle. Plan to use ods
etc to get last5min stat etc.
Test Plan:
made changes in db_bench
Ran ./db_bench --statistics=1 --num=10000 --cache_size=5000
This will print the cache hit/miss stats.
Reviewers: dhruba, heyongqiang
Differential Revision: https://reviews.facebook.net/D6441
Summary:
When a new version is created, we sort all the files at every
level based on their size. This is necessary because we want
to compact the largest file first. The sorting takes quite a
bit of CPU.
Moved the sorting code to be outside the mutex. Also, the
earlier code was sorting files at all levels but we do not
need to sort the highest-number level because those files
are never the cause of any compaction. To reduce sorting
costs, we sort only the first few files in each level
because it is likely that those are the only files in that
level that will be picked for compaction.
At steady state, I have seen that this patch increase
throughout from 1500 writes/sec to 1700 writes/sec at the
end of a 72 hour run. The cpu saving by not sorting the
last level was not distinctive in this test run because
there were only 100K files in the highest numbered level.
I expect the cpu saving to be significant when the number of
files is much higher.
This is mostly an early preview and not ready for rigorous review.
With this patch, the writs/sec is now bottlenecked not by the sorting code but by GetOverlappingInputs. I am working on a patch to optimize GetOverlappingInputs.
Test Plan: make check
Reviewers: MarkCallaghan, heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D6411
Summary:
The Version::GetOverlappingInputs() is called multiple times in
the compaction code path. Eack invocation does a binary search
for overlapping files in the specified key range.
This patch remembers the offset of an overlapped file when
GetOverlappingInputs() is called the first time within
a compaction run. Suceeding calls to GetOverlappingInputs()
uses the remembered index to avoid the binary search.
I measured that 1000 iterations of GetOverlappingInputs
takes around 4500 microseconds without this patch. If I use
this patch with the hint on every invocation, then 1000
iterations take about 3900 microsecond.
Test Plan: make check OPT=-g
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan, emayanke, sheki
Differential Revision: https://reviews.facebook.net/D6513
Summary:
Added a conditional flush in ~DBImpl to flush.
There is still a chance of writes not being persisted if there is a
crash (not a clean shutdown) before the DBImpl instance is destroyed.
Test Plan: modified db_test to meet the new expectations.
Reviewers: dhruba, heyongqiang
Differential Revision: https://reviews.facebook.net/D6519
Summary:
The default compilation process now uses "-Wall" to compile.
Fix all compilation error generated by gcc.
Test Plan: make all check
Reviewers: heyongqiang, emayanke, sheki
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6525
Summary:
The method Version::GetOverlappingInputs used a sequential search
to map a kay-range to a set of files. But the files are arranged
in ascending order of key, so a biary search is more effective.
This patch implements Version::GetOverlappingInputsBinarySearch
that finds one file that corresponds to the specified key range
and then iterates backwards and forwards to find all overlapping
files.
This patch is critical for making compactions efficient, especially
when there are thousands of files in a single level.
I measured that 1000 iterations of TEST_MaxNextLevelOverlappingBytes
takes 16000 microseconds without this patch. With this patch, the
same method takes about 4600 microseconds.
Test Plan: Almost all unit tests in db_test uses this method to lookup keys.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan, emayanke, sheki
Differential Revision: https://reviews.facebook.net/D6465
Summary:
There are certain use-cases where the application intends to
delete older keys aftre they have expired a certian time period.
One option for those applications is to periodically scan the
entire database and delete appropriate keys.
A better way is to allow the application to hook into the
compaction process. This patch allows the application to set
a method callback for every key that is being compacted. If
this method returns true, then the key is not preserved in
the output of the compaction.
Test Plan:
This is mostly to preview the proposed new public api.
Since it is a public api, please do due diligence on reviewing it.
I will be writing test cases for this api in mynext version of
this patch.
Reviewers: MarkCallaghan, heyongqiang
Reviewed By: heyongqiang
CC: sheki, adsharma
Differential Revision: https://reviews.facebook.net/D6285
Summary: as subject.
Test Plan: manually test it, will add a testcase
Reviewers: dhruba, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6345
Summary: Leveldb currently uses windowBits=-14 while using zlib compression.(It was earlier 15). This makes the setting configurable. Related changes here: https://reviews.facebook.net/D6105
Test Plan: make all check
Reviewers: dhruba, MarkCallaghan, sheki, heyongqiang
Differential Revision: https://reviews.facebook.net/D6393
Summary:
as subject
Test Plan:
run db_bench and db_test
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6111
Summary:
This makes the stall timers in MakeRoomForWrite more accurate by timing
the sleeps. From looking at the logs the real sleep times are usually
about 2000 usecs each when SleepForMicros(1000) is called. The modified LOG messages are:
2012/10/29-12:06:33.271984 2b3cc872f700 delaying write 13 usecs for level0_slowdown_writes_trigger
2012/10/29-12:06:34.688939 2b3cc872f700 delaying write 1728 usecs for rate limits with max score 3.83
Task ID: #
Blame Rev:
Test Plan:
run db_bench, look at DB/LOG
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6297
Summary:
The leveldb API is enhanced to support different compression algorithms at
different levels.
This adds the option min_level_to_compress to db_bench that specifies
the minimum level for which compression should be done when
compression is enabled. This can be used to disable compression for levels
0 and 1 which are likely to suffer from stalls because of the CPU load
for memtable flushes and (L0,L1) compaction. Level 0 is special as it
gets frequent memtable flushes. Level 1 is special as it frequently
gets all:all file compactions between it and level 0. But all other levels
could be the same. For any level N where N > 1, the rate of sequential
IO for that level should be the same. The last level is the
exception because it might not be full and because files from it are
not read to compact with the next larger level.
The same amount of time will be spent doing compaction at any
level N excluding N=0, 1 or the last level. By this standard all
of those levels should use the same compression. The difference is that
the loss (using more disk space) from a faster compression algorithm
is less significant for N=2 than for N=3. So we might be willing to
trade disk space for faster write rates with no compression
for L0 and L1, snappy for L2, zlib for L3. Using a faster compression
algorithm for the mid levels also allows us to reclaim some cpu
without trading off much loss in disk space overhead.
Also note that little is to be gained by compressing levels 0 and 1. For
a 4-level tree they account for 10% of the data. For a 5-level tree they
account for 1% of the data.
With compression enabled:
* memtable flush rate is ~18MB/second
* (L0,L1) compaction rate is ~30MB/second
With compression enabled but min_level_to_compress=2
* memtable flush rate is ~320MB/second
* (L0,L1) compaction rate is ~560MB/second
This practicaly takes the same code from https://reviews.facebook.net/D6225
but makes the leveldb api more general purpose with a few additional
lines of code.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6261
Summary:
Adds the "MB/sec in" and "MB/sec out" to this line:
Amplification: 1.7 rate, 0.01 GB in, 0.02 GB out, 8.24 MB/sec in, 13.75 MB/sec out
Changes all values to be reported per interval and since test start for this line:
... thread 0: (10000,60000) ops and (19155.6,27307.5) ops/second in (0.522041,2.197198) seconds
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6291
Summary:
A previous commit 4c107587ed introduced
the idea that some version updates might not delete obsolete files.
This means that if a unit test blindly counts the number of files
in the db directory it might not represent the true state of the database.
Use GetLiveFiles() insteads to count the number of live files in the database.
Test Plan:
make check
Summary:
Adds a method that returns the score for the next level that most
needs compaction. That method is then used by db_bench to rate limit threads.
Threads are put to sleep at the end of each stats interval until the score
is less than the limit. The limit is set via the --rate_limit=$double option.
The specified value must be > 1.0. Also adds the option --stats_per_interval
to enable additional metrics reported every stats interval.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6243
Summary: Enable LevelDb to create a new log file if current log file is too large.
Test Plan:
Write a script and manually check the generated info LOG.
Task ID: 1803577
Blame Rev:
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: zshao
Differential Revision: https://reviews.facebook.net/D6003
Summary:
I used server uptime to compute per-level IO throughput rates. I
intended to use time spent doing compaction at that level. This fixes that.
Task ID: #
Blame Rev:
Test Plan:
run db_bench, look at results
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D6237
Summary:
A previous commit 4c107587ed introduced
the idea that some version updates might not delete obsolete files.
This means that if a unit test blindly counts the number of files
in the db directory it might not represent the true state of the database.
Use GetLiveFiles() insteads to count the number of live files in the database.
Test Plan: make check
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6207
Summary:
It is best if we pick the largest file to compact in a level.
This reduces the write amplification factor for compactions.
Each level has an auxiliary data structure called files_by_size_
that sorts all files by their size. This data structure is
updated when a new version is created.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6195
Summary:
Prior to multi-threaded compaction, wrap-around would be done by using
current_->files_[level[0]. With this change we should be
using the first file for which f->being_compacted is not true.
1ca0584345 (commitcomment-2041516)
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6165
Summary:
This adds more statistics to be reported by GetProperty("leveldb.stats").
The new stats include time spent waiting on stalls in MakeRoomForWrite.
This also includes the total amplification rate where that is:
(#bytes of sequential IO during compaction) / (#bytes from Put)
This also includes a lot more data for the per-level compaction report.
* Rn(MB) - MB read from level N during compaction between levels N and N+1
* Rnp1(MB) - MB read from level N+1 during compaction between levels N and N+1
* Wnew(MB) - new data written to the level during compaction
* Amplify - ( Write(MB) + Rnp1(MB) ) / Rn(MB)
* Rn - files read from level N during compaction between levels N and N+1
* Rnp1 - files read from level N+1 during compaction between levels N and N+1
* Wnp1 - files written to level N+1 during compaction between levels N and N+1
* NewW - new files written to level N+1 during compaction
* Count - number of compactions done for this level
This is the new output from DB::GetProperty("leveldb.stats"). The old output stopped at Write(MB)
Compactions
Level Files Size(MB) Time(sec) Read(MB) Write(MB) Rn(MB) Rnp1(MB) Wnew(MB) Amplify Read(MB/s) Write(MB/s) Rn Rnp1 Wnp1 NewW Count
-------------------------------------------------------------------------------------------------------------------------------------
0 3 6 33 0 576 0 0 576 -1.0 0.0 1.3 0 0 0 0 290
1 127 242 351 5316 5314 570 4747 567 17.0 12.1 12.1 287 2399 2685 286 32
2 161 328 54 822 824 326 496 328 4.0 1.9 1.9 160 251 411 160 161
Amplification: 22.3 rate, 0.56 GB in, 12.55 GB out
Uptime(secs): 439.8
Stalls(secs): 206.938 level0_slowdown, 0.000 level0_numfiles, 24.129 memtable_compaction
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
(cherry picked from commit ecdeead38f86cc02e754d0032600742c4f02fec8)
Reviewers: dhruba
Differential Revision: https://reviews.facebook.net/D6153
Summary:
The compaction process deletes a large number of files. This takes
quite a bit of time and is best done outside the mutex lock.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6123
Summary:
The compaction process deletes a large number of files. This takes
quite a bit of time and is best done outside the mutex lock.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D6123
Summary:
The compaction process deletes a large number of files. This takes
quite a bit of time and is best done outside the mutex lock.
Test Plan:
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary:
The parameter delete_obsolete_files_period_micros controls the
periodicity of deleting obsolete files. db_bench was reading in
this parameter intoa local variable called 'l' but was incorrectly
using another local variable called 'n' while setting it in the
db.options data structure.
This patch also logs the value of delete_obsolete_files_period_micros
in the LOG file at db startup time.
I am hoping that this will improve the overall write throughput drastically.
Test Plan: run db_bench
Reviewers: MarkCallaghan, heyongqiang
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6099
published in https://reviews.facebook.net/D5997.
Summary:
This patch allows compaction to occur in multiple background threads
concurrently.
If a manual compaction is issued, the system falls back to a
single-compaction-thread model. This is done to ensure correctess
and simplicity of code. When the manual compaction is finished,
the system resumes its concurrent-compaction mode automatically.
The updates to the manifest are done via group-commit approach.
Test Plan: run db_bench
Summary:
The method DeleteObsolete files is a very costly methind, especially
when the number of files in a system is large. It makes a list of
all live-files and then scans the directory to compute the diff.
By default, this method is executed after every compaction run.
This patch makes it such that DeleteObsolete files is never
invoked twice within a configured period.
Test Plan: run all unit tests
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6045
Summary: Enhance db_bench to allow setting the number of levels in a database.
Test Plan: run db_bench and look at LOG
Reviewers: heyongqiang, MarkCallaghan
Reviewed By: MarkCallaghan
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6027
Summary:
We have seen that reading data via the pread call (instead of
mmap) is much faster on Linux 2.6.x kernels. This patch makes
an equivalent option to switch off mmaps for the write path
as well.
db_bench --mmap_write=0 will use write() instead of mmap() to
write data to a file.
This change is backward compatible, the default
option is to continue using mmap for writing to a file.
Test Plan: "make check all"
Differential Revision: https://reviews.facebook.net/D5781
Summary:
The option is zero by default and in that case reporting is unchanged.
By unchanged, the interval at which stats are reported is scaled after each
report and newline is not issued after each report so one line is rewritten.
When non-zero it specifies the constant interval (in operations) at which
statistics are reported and the stats include the rate per interval. This
makes it easier to determine whether QPS changes over the duration of the test.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba
Reviewed By: dhruba
CC: heyongqiang
Differential Revision: https://reviews.facebook.net/D5817
Summary:
A simple CLI which calles DB->CompactRange()
Can take String key's as range.
Test Plan:
Inserted data into a table.
Waited for a minute, used compact tool on it. File modification time's
changed so Compact did something on the files.
Existing unit tests work.
Reviewers: heyongqiang, dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5697
Summary:
In the current code, a Get() call can trigger compaction if it has to look at more than one file. This causes unnecessary compaction because looking at more than one file is a penalty only if the file is not yet in the cache. Also, th current code counts these files before the bloom filter check is applied.
This patch counts a 'seek' only if the file fails the bloom filter
check and has to read in data block(s) from the storage.
This patch also counts a 'seek' if a file is not present in the file-cache, because opening a file means that its index blocks need to be read into cache.
Test Plan: unit test attached. I will probably add one more unti tests.
Reviewers: heyongqiang
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5709
Summary:
If ReadCompaction is switched off, then it is better to not even
submit background compaction jobs. I see about 3% increase in
read-throughput on a pure memory database.
Test Plan: run db_bench
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5673
Summary:
The GetLiveFiles() api lists the set of sst files and the current
MANIFEST file. But the database continues to append new data to the
MANIFEST file even when the application is backing it up to the
backup location. This means that the database-version that is
stored in the MANIFEST FILE in the backup location
does not correspond to the sst files returned by GetLiveFiles.
This API adds a new parameter to GetLiveFiles. This new parmeter
returns the current size of the MANIFEST file.
Test Plan: Unit test attached.
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5631
Summary: Print out the compile version in the LOG.
Test Plan: run dbbench and verify LOG
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5529
Summary:
as subject. This diff should be good for benchmarking.
will send another diff to make it better in the case the seek compaction is enable.
In that coming diff, will not count a seek if the bloomfilter filters.
Test Plan: build
Reviewers: dhruba, MarkCallaghan
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5481
Summary:
A set of apis that allows an application to backup data from the
leveldb database based on a set of files.
Test Plan: unint test attached. more coming soon.
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5439
Summary:
as subject. this can be used for benchmarking.
If we want it for some cases, we can do more changes to make this part of the option.
Test Plan: db_test
Reviewers: dhruba
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5451
Summary:
FLAGS_cache_size is a long, no need to scan %lld into a size_t
for it (which generates a compiler warning)
Test Plan: run db_bench
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: heyongqiang
Differential Revision: https://reviews.facebook.net/D5427
Summary:
This adds an option to db_bench to specify the compression algorithm to
use for LevelDB
Test Plan: ran db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5421
Summary:
Ability to switch off filesystem read-aheads. This change is
backward-compatible: the default setting is to allow file
system read-aheads.
Test Plan: run benchmarks
Reviewers: heyongqiang, adsharma
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5391
Summary: Enable db_bench to specify block size.
Test Plan: compile and run
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5373
Summary: added a new option db_log_dir, which points the log dir. Inside that dir, in order to make log names unique, the log file name is prefixed with the leveldb data dir absolute path.
Test Plan: db_test
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5205
Summary: If none of reads or writes are specified by user, then pick the FLAGS_NUM as the number of iterations in the ReadRandomWriteRandom test. If either reads or writes are defined, then use their maximum.
Test Plan: run benchmark
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5217
Summary:
This patch enables the db_bench benchmark to issue both random reads and random writes at the same time. This options can be trigged via
./db_bench --benchmarks=readrandomwriterandom
The default percetage of reads is 90.
One can change the percentage of reads by specifying the --readwritepercent.
./db_bench --benchmarks=readrandomwriterandom=50
This is a feature request from Jeffro asking for leveldb performance with a 90:10 read:write ratio.
Test Plan: run on test machine.
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5067
Summary:
Clean up compiler warnings generated by -Wall option.
make clean all OPT=-Wall
This is a pre-requisite before making a new release.
Test Plan: compile and run unit tests
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5019
Summary:
The numbers of shards that the block cache is divided into is
configurable. However, if the user specifies that he/she wants
the block cache to be divided into more than 2**20 pieces, then
the system will rey to allocate a huge array of that size) that
could fail.
It is better to limit the sharding of the block cache to an
upper bound. The default sharding is 16 shards (i.e. 2**4)
and the maximum is now 2 million shards (i.e. 2**20).
Also, fixed a bug with the LRUCache where the numShardBits
should be a private member of the LRUCache object rather than
a static variable.
Test Plan:
run db_bench with --cache_numshardbits=64.
Task ID: #
Blame Rev:
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5013
Summary: as subject. ported the change from google code leveldb 1.5
Test Plan: run db_test
Reviewers: dhruba
Differential Revision: https://reviews.facebook.net/D4839
Summary:
Introduce a new method Env->Fsync() that issues fsync (instead of fdatasync).
This is needed for data durability when running on ext3 filesystems.
Added options to the benchmark db_bench to generate performance numbers
with either fsync or fdatasync enabled.
Cleaned up Makefile to build leveldb_shell only when building the thrift
leveldb server.
Test Plan: build and run benchmark
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D4911
Summary:
as subject
add a tool to read sst file
as subject.
./sst_reader --command=check --file=
./sst_reader --command=scan --file=
Test Plan:
db_test
run this command
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D4881
Summary: Log the open-options to the LOG. Use options_ instead of options because SanitizeOptions could modify the max_file_open limit.
Test Plan: num db_bench
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D4833
Summary:
Fixed unit test c_test by initializing logger=NULL.
Removed "atomic" from last_log_ts so that unit tests do not require C11 compiler.
Anyway, last_log_ts is mostly used for logging, so it is ok if it is loosely
accurate.
Test Plan: run c_test
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D4803
Summary: Record the version of the source that we are compiling. We keep a record of the git revision in util/version.cc. This source file is then built as a regular source file as part of the compilation process. One can run "strings executable_filename | grep _build_" to find the version of the source that we used to build the executable file.
Test Plan: none
Differential Revision: https://reviews.facebook.net/D4785
Summary:
as subject.
A new log is written to scribe via thrift client when a new db is opened and when there is
a compaction.
a new option var scribe_log_db_stats is added.
Test Plan: manually checked using command "ptail -time 0 leveldb_deploy_stats"
Reviewers: dhruba
Differential Revision: https://reviews.facebook.net/D4659
Summary:
The fcntl call cannot detect lock conflicts when invoked multiple times
from the same thread.
Use a static lockedFile Set to record the paths that are locked.
A lockfile request checks to see if htis filename already exists in
lockedFiles, if so, then it triggers an error. Otherwise, it inserts
the filename in the lockedFiles Set.
A unlock file request verifies that the filename is in the lockedFiles
set and removes it from lockedFiles set.
Test Plan: unit test attached
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D4755
Summary: as subject and only maintain 10 log files.
Test Plan: new test in db_test
Reviewers: dhruba
Differential Revision: https://reviews.facebook.net/D4731
Summary: as subject. The flush will flush everything in the db.
Test Plan: new test in db_test.cc
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D4029
Summary:
Added option --writes=xxx to specify the number of keys that we want to overwrite in the benchmark.
Task ID: #
Blame Rev:
Test Plan: Revert Plan:
Reviewers: adsharma
CC: sc
Differential Revision: https://reviews.facebook.net/D3465
Summary:
The db_bench test was not using the specified value for the max-file-open. Fixed.
The fs readhead is switched off.
Gather statistics about the table cache and print it out at the end of the tets run.
Test Plan: Revert Plan:
Reviewers: adsharma, sc
Reviewed By: adsharma
Differential Revision: https://reviews.facebook.net/D3441
Summary:
skiplist doesn't cache the location of the last insert and becomes
CPU bound when the input data has sequential keys.
Notes on thread safety: ::Insert() already requires external
synchronization. So this change is not making it any worse.
Test Plan: skiplist_test
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D3129
In particular, we add a new FilterPolicy class. An instance
of this class can be supplied in Options when opening a
database. If supplied, the instance is used to generate
summaries of keys (e.g., a bloom filter) which are placed in
sstables. These summaries are consulted by DB::Get() so we
can avoid reading sstable blocks that are guaranteed to not
contain the key we are looking for.
This change provides one implementation of FilterPolicy
based on bloom filters.
Other changes:
- Updated version number to 1.4.
- Some build tweaks.
- C binding for CompactRange.
- A few more benchmarks: deleteseq, deleterandom, readmissing, seekrandom.
- Minor .gitignore update.
- Pass system's values of CFLAGS,LDFLAGS.
Don't override OPT if it's already set.
Original patch by Alessio Treglia <alessio@debian.org>:
http://code.google.com/p/leveldb/issues/detail?id=27#c6
- Remove 1 exit time destructor from leveldb.
See http://crbug.com/101600
- Fix problem where sstable building code would pass an
internal key to the user comparator.
(Sync with uptream at 25436817.)
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
- Added DB::CompactRange() method.
Changed manual compaction code so it breaks up compactions of
big ranges into smaller compactions.
Changed the code that pushes the output of memtable compactions
to higher levels to obey the grandparent constraint: i.e., we
must never have a single file in level L that overlaps too
much data in level L+1 (to avoid very expensive L-1 compactions).
Added code to pretty-print internal keys.
- Fixed bug where we would not detect overlap with files in
level-0 because we were incorrectly using binary search
on an array of files with overlapping ranges.
Added "leveldb.sstables" property that can be used to dump
all of the sstables and ranges that make up the db state.
- Removing post_write_snapshot support. Email to leveldb mailing
list brought up no users, just confusion from one person about
what it meant.
- Fixing static_cast char to unsigned on BIG_ENDIAN platforms.
Fixes Issue 35 and Issue 36.
- Comment clarification to address leveldb Issue 37.
- Change license in posix_logger.h to match other files.
- A build problem where uint32 was used instead of uint32_t.
Sync with upstream @24408625
- Fix bug in Get: when it triggers a compaction, it could sometimes
mark the compaction with the wrong level (if there was a gap
in the set of levels examined for the Get).
- Do not hold mutex while writing to the log file or to the
MANIFEST file.
Added a new benchmark that runs a writer thread concurrently with
reader threads.
Percentiles
------------------------------
micros/op: avg median 99 99.9 99.99 99.999 max
------------------------------------------------------
before: 42 38 110 225 32000 42000 48000
after: 24 20 55 65 130 1100 7000
- Fixed race in optimized Get. It should have been using the
pinned memtables, not the current memtables.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@50 62dab493-f737-651d-591e-8d6aee1b9529
- Fix for issue 33 (non-null-terminated result from
leveldb_property_value())
- Support for running multiple instances of a benchmark in parallel.
- Reduce lock contention on Get():
(1) Do not hold the lock while searching memtables.
(2) Shard block and table caches 16-ways.
Benchmark for evaluating this change:
$ db_bench --benchmarks=fillseq1,readrandom --threads=$n
(fillseq1 is a small hack to make sure fillseq runs once regardless
of number of threads specified on the command line).
git-svn-id: https://leveldb.googlecode.com/svn/trunk@49 62dab493-f737-651d-591e-8d6aee1b9529
- Fix bug in Iterator::Prev where it would return the wrong key.
Fixes issues 29 and 30.
- Added a tweak to testharness to allow running just some tests.
- Fixing two minor documentation errors based on issues 28 and 25.
- Cleanup; fix namespaces of export-to-C code.
Also fix one "const char*" vs "char*" mismatch.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@48 62dab493-f737-651d-591e-8d6aee1b9529
- Added a C binding for LevelDB.
May be useful as a stable ABI that can be used by
programs that keep leveldb in a shared library,
or for JNI API.
- Replaced SQLite's readseq benchmark to a more efficient version.
SQLite readseq speeds increased by about a factor of 2x
from the previous version. Also updated benchmark page to
reflect readseq speed up.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@46 62dab493-f737-651d-591e-8d6aee1b9529
- Removed one copy of an uncompressed block contents changing
the signature of Snappy_Uncompress() so it uncompresses into a
flat array instead of a std::string.
Speeds up readrandom ~10%.
- Instead of a combination of Env/WritableFile, we now have a
Logger interface that can be easily overridden applications
that want to supply their own logging.
- Separated out the gcc and Sun Studio parts of atomic_pointer.h
so we can use 'asm', 'volatile' keywords for Sun Studio.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@39 62dab493-f737-651d-591e-8d6aee1b9529
- LevelDB patch for Sun Studio
Based on a patch submitted by Theo Schlossnagle - thanks!
This fixes Issue 17.
- Fix a couple of test related memory leaks.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@38 62dab493-f737-651d-591e-8d6aee1b9529
Slight tweak to the no-overlap optimization: only push to
level 2 to reduce the amount of wasted space when the same
small key range is being repeatedly overwritten.
Fix for Issue 18: Avoid failure on Windows by avoiding
deletion of lock file until the end of DestroyDB().
Fix for Issue 19: Disregard sequence numbers when checking for
overlap in sstable ranges. This fixes issue 19: when writing
the same key over and over again, we would generate a sequence
of sstables that were never merged together since their sequence
numbers were disjoint.
Don't ignore map/unmap error checks.
Miscellaneous fixes for small problems Sanjay found while diagnosing
issue/9 and issue/16 (corruption_testr failures).
- log::Reader reports the record type when it finds an unexpected type.
- log::Reader no longer reports an error when it encounters an expected
zero record regardless of the setting of the "checksum" flag.
- Added a missing forward declaration.
- Documented a side-effects of larger write buffer sizes
(longer recovery time).
git-svn-id: https://leveldb.googlecode.com/svn/trunk@37 62dab493-f737-651d-591e-8d6aee1b9529
- Implemented Get() directly instead of building on top of a full
merging iterator stack. This speeds up the "readrandom" benchmark
by up to 15-30%.
- Fixed an opensource compilation problem.
Added --db=<name> flag to control where the database is placed.
- Automatically compact a file when we have done enough
overlapping seeks to that file.
- Fixed a performance bug where we would read from at least one
file in a level even if none of the files overlapped the key
being read.
- Makefile fix for Mac OSX installations that have XCode 4 without XCode 3.
- Unified the two occurrences of binary search in a file-list
into one routine.
- Found and fixed a bug where we would unnecessarily search the
last file when looking for a key larger than all data in the
level.
- A fix to avoid the need for trivial move compactions and
therefore gets rid of two out of five syncs in "fillseq".
- Removed the MANIFEST file write when switching to a new
memtable/log-file for a 10-20% improvement on fill speed on ext4.
- Adding a SNAPPY setting in the Makefile for folks who have
Snappy installed. Snappy compresses values and speeds up writes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@32 62dab493-f737-651d-591e-8d6aee1b9529
Fixed race condition reported by Dave Smit (dizzyd@dizzyd,com)
on the leveldb mailing list. We were not signalling
waiters after a trivial move from level-0. The result was
that in some cases (hard to reproduce), a write would get
stuck forever waiting for the number of level-0 files to drop
below its hard limit.
The new code is simpler: there is just one condition variable
instead of two, and the condition variable is signalled after
every piece of background work finishes. Also, all compaction
work (including for manual compactions) is done in the
background thread, and therefore we can remove the
"compacting_" variable.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@31 62dab493-f737-651d-591e-8d6aee1b9529
* Patch LevelDB to build for OSX and iOS
* Fix race condition in memtable iterator deletion.
* Other small fixes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@29 62dab493-f737-651d-591e-8d6aee1b9529
* env_chromium.cc should not export symbols.
* Fix MSVC warnings.
* Removed large value support.
* Fix broken reference to documentation file
git-svn-id: https://leveldb.googlecode.com/svn/trunk@24 62dab493-f737-651d-591e-8d6aee1b9529
